ARM: dts: dra7: convert to use new clkctrl layout

Convert DRA7xx to use the new clockdomain based layout. Previously the
clkctrl split was based on CM isntance boundaries. The new layout
helps with introducing the interconnect driver instances.

Signed-off-by: Tero Kristo <[e-mail]>
Signed-off-by: Tony Lindgren <[e-mail]>

arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi

···
 
 &mcasp3 {
 	#sound-dai-cells = <0>;
-	assigned-clocks = <&l4per_clkctrl DRA7_MCASP3_CLKCTRL 24>;
+	assigned-clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 24>;
 	assigned-clock-parents = <&sys_clkin2>;
 	status = "okay";
 

arch/arm/boot/dts/dra7-evm-common.dtsi

···
 
 &atl {
 	assigned-clocks = <&abe_dpll_sys_clk_mux>,
-			  <&atl_clkctrl DRA7_ATL_CLKCTRL 26>,
+			  <&atl_clkctrl DRA7_ATL_ATL_CLKCTRL 26>,
 			  <&dpll_abe_ck>,
 			  <&dpll_abe_m2x2_ck>,
 			  <&atl_clkin2_ck>;
···
 &mcasp3 {
 	#sound-dai-cells = <0>;
 
-	assigned-clocks = <&l4per_clkctrl DRA7_MCASP3_CLKCTRL 24>;
+	assigned-clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 24>;
 	assigned-clock-parents = <&atl_clkin2_ck>;
 
 	status = "okay";

arch/arm/boot/dts/dra7.dtsi

···
 			ti,hwmods = "timer1";
 			ti,timer-alwon;
 			clock-names = "fck";
-			clocks = <&wkupaon_clkctrl DRA7_TIMER1_CLKCTRL 24>;
+			clocks = <&wkupaon_clkctrl DRA7_WKUPAON_TIMER1_CLKCTRL 24>;
 		};
 
 		timer2: timer@48032000 {
···
 			#address-cells = <1>;
 			#size-cells = <0>;
 			ti,hwmods = "qspi";
-			clocks = <&l4per_clkctrl DRA7_QSPI_CLKCTRL 25>;
+			clocks = <&l4per2_clkctrl DRA7_L4PER2_QSPI_CLKCTRL 25>;
 			clock-names = "fck";
 			num-cs = <4>;
 			interrupts = <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>;
···
 				reg-names = "phy_rx", "phy_tx", "pll_ctrl";
 				syscon-phy-power = <&scm_conf 0x374>;
 				clocks = <&sys_clkin1>,
-					 <&l3init_clkctrl DRA7_SATA_CLKCTRL 8>;
+					 <&l3init_clkctrl DRA7_L3INIT_SATA_CLKCTRL 8>;
 				clock-names = "sysclk", "refclk";
 				syscon-pllreset = <&scm_conf 0x3fc>;
 				#phy-cells = <0>;
···
 				syscon-pcs = <&scm_conf_pcie 0x10>;
 				clocks = <&dpll_pcie_ref_ck>,
 					 <&dpll_pcie_ref_m2ldo_ck>,
-					 <&l3init_clkctrl DRA7_PCIE1_CLKCTRL 8>,
-					 <&l3init_clkctrl DRA7_PCIE1_CLKCTRL 9>,
-					 <&l3init_clkctrl DRA7_PCIE1_CLKCTRL 10>,
+					 <&pcie_clkctrl DRA7_PCIE_PCIE1_CLKCTRL 8>,
+					 <&pcie_clkctrl DRA7_PCIE_PCIE1_CLKCTRL 9>,
+					 <&pcie_clkctrl DRA7_PCIE_PCIE1_CLKCTRL 10>,
 					 <&optfclk_pciephy_div>,
 					 <&sys_clkin1>;
 				clock-names = "dpll_ref", "dpll_ref_m2",
···
 				syscon-pcs = <&scm_conf_pcie 0x10>;
 				clocks = <&dpll_pcie_ref_ck>,
 					 <&dpll_pcie_ref_m2ldo_ck>,
-					 <&l3init_clkctrl DRA7_PCIE2_CLKCTRL 8>,
-					 <&l3init_clkctrl DRA7_PCIE2_CLKCTRL 9>,
-					 <&l3init_clkctrl DRA7_PCIE2_CLKCTRL 10>,
+					 <&pcie_clkctrl DRA7_PCIE_PCIE2_CLKCTRL 8>,
+					 <&pcie_clkctrl DRA7_PCIE_PCIE2_CLKCTRL 9>,
+					 <&pcie_clkctrl DRA7_PCIE_PCIE2_CLKCTRL 10>,
 					 <&optfclk_pciephy_div>,
 					 <&sys_clkin1>;
 				clock-names = "dpll_ref", "dpll_ref_m2",
···
 			interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
 			phys = <&sata_phy>;
 			phy-names = "sata-phy";
-			clocks = <&l3init_clkctrl DRA7_SATA_CLKCTRL 8>;
+			clocks = <&l3init_clkctrl DRA7_L3INIT_SATA_CLKCTRL 8>;
 			ti,hwmods = "sata";
 			ports-implemented = <0x1>;
 		};
···
 				reg = <0x4a084000 0x400>;
 				syscon-phy-power = <&scm_conf 0x300>;
 				clocks = <&usb_phy1_always_on_clk32k>,
-					 <&l3init_clkctrl DRA7_USB_OTG_SS1_CLKCTRL 8>;
+					 <&l3init_clkctrl DRA7_L3INIT_USB_OTG_SS1_CLKCTRL 8>;
 				clock-names =	"wkupclk",
 						"refclk";
 				#phy-cells = <0>;
···
 				reg = <0x4a085000 0x400>;
 				syscon-phy-power = <&scm_conf 0xe74>;
 				clocks = <&usb_phy2_always_on_clk32k>,
-					 <&l3init_clkctrl DRA7_USB_OTG_SS2_CLKCTRL 8>;
+					 <&l3init_clkctrl DRA7_L3INIT_USB_OTG_SS2_CLKCTRL 8>;
 				clock-names =	"wkupclk",
 						"refclk";
 				#phy-cells = <0>;
···
 				syscon-phy-power = <&scm_conf 0x370>;
 				clocks = <&usb_phy3_always_on_clk32k>,
 					 <&sys_clkin1>,
-					 <&l3init_clkctrl DRA7_USB_OTG_SS1_CLKCTRL 8>;
+					 <&l3init_clkctrl DRA7_L3INIT_USB_OTG_SS1_CLKCTRL 8>;
 				clock-names =	"wkupclk",
 						"sysclk",
 						"refclk";
···
 					<SYSC_IDLE_NO>,
 					<SYSC_IDLE_SMART>,
 					<SYSC_IDLE_SMART_WKUP>;
-			clocks = <&coreaon_clkctrl DRA7_SMARTREFLEX_CORE_CLKCTRL 0>;
+			clocks = <&coreaon_clkctrl DRA7_COREAON_SMARTREFLEX_CORE_CLKCTRL 0>;
 			clock-names = "fck";
 			#address-cells = <1>;
 			#size-cells = <1>;
···
 					<SYSC_IDLE_NO>,
 					<SYSC_IDLE_SMART>,
 					<SYSC_IDLE_SMART_WKUP>;
-			clocks = <&coreaon_clkctrl DRA7_SMARTREFLEX_MPU_CLKCTRL 0>;
+			clocks = <&coreaon_clkctrl DRA7_COREAON_SMARTREFLEX_MPU_CLKCTRL 0>;
 			clock-names = "fck";
 			#address-cells = <1>;
 			#size-cells = <1>;
···
 			ti,hwmods = "atl";
 			ti,provided-clocks = <&atl_clkin0_ck>, <&atl_clkin1_ck>,
 					     <&atl_clkin2_ck>, <&atl_clkin3_ck>;
-			clocks = <&atl_clkctrl DRA7_ATL_CLKCTRL 26>;
+			clocks = <&atl_clkctrl DRA7_ATL_ATL_CLKCTRL 26>;
 			clock-names = "fck";
 			status = "disabled";
 		};
···
 			interrupt-names = "tx", "rx";
 			dmas = <&edma_xbar 129 1>, <&edma_xbar 128 1>;
 			dma-names = "tx", "rx";
-			clocks = <&ipu_clkctrl DRA7_MCASP1_CLKCTRL 22>, <&ipu_clkctrl DRA7_MCASP1_CLKCTRL 24>,
-				 <&ipu_clkctrl DRA7_MCASP1_CLKCTRL 28>;
+			clocks = <&ipu_clkctrl DRA7_IPU_MCASP1_CLKCTRL 22>, <&ipu_clkctrl DRA7_IPU_MCASP1_CLKCTRL 24>,
+				 <&ipu_clkctrl DRA7_IPU_MCASP1_CLKCTRL 28>;
 			clock-names = "fck", "ahclkx", "ahclkr";
 			status = "disabled";
 		};
···
 			interrupt-names = "tx", "rx";
 			dmas = <&edma_xbar 131 1>, <&edma_xbar 130 1>;
 			dma-names = "tx", "rx";
-			clocks = <&l4per_clkctrl DRA7_MCASP2_CLKCTRL 22>,
-				 <&l4per_clkctrl DRA7_MCASP2_CLKCTRL 24>,
-				 <&l4per_clkctrl DRA7_MCASP2_CLKCTRL 28>;
+			clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP2_CLKCTRL 22>,
+				 <&l4per2_clkctrl DRA7_L4PER2_MCASP2_CLKCTRL 24>,
+				 <&l4per2_clkctrl DRA7_L4PER2_MCASP2_CLKCTRL 28>;
 			clock-names = "fck", "ahclkx", "ahclkr";
 			status = "disabled";
 		};
···
 			interrupt-names = "tx", "rx";
 			dmas = <&edma_xbar 133 1>, <&edma_xbar 132 1>;
 			dma-names = "tx", "rx";
-			clocks = <&l4per_clkctrl DRA7_MCASP3_CLKCTRL 22>,
-				 <&l4per_clkctrl DRA7_MCASP3_CLKCTRL 24>;
+			clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 22>,
+				 <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 24>;
 			clock-names = "fck", "ahclkx";
 			status = "disabled";
 		};
···
 			interrupt-names = "tx", "rx";
 			dmas = <&edma_xbar 135 1>, <&edma_xbar 134 1>;
 			dma-names = "tx", "rx";
-			clocks = <&l4per_clkctrl DRA7_MCASP4_CLKCTRL 22>,
-				 <&l4per_clkctrl DRA7_MCASP4_CLKCTRL 24>;
+			clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP4_CLKCTRL 22>,
+				 <&l4per2_clkctrl DRA7_L4PER2_MCASP4_CLKCTRL 24>;
 			clock-names = "fck", "ahclkx";
 			status = "disabled";
 		};
···
 			interrupt-names = "tx", "rx";
 			dmas = <&edma_xbar 137 1>, <&edma_xbar 136 1>;
 			dma-names = "tx", "rx";
-			clocks = <&l4per_clkctrl DRA7_MCASP5_CLKCTRL 22>,
-				 <&l4per_clkctrl DRA7_MCASP5_CLKCTRL 24>;
+			clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP5_CLKCTRL 22>,
+				 <&l4per2_clkctrl DRA7_L4PER2_MCASP5_CLKCTRL 24>;
 			clock-names = "fck", "ahclkx";
 			status = "disabled";
 		};
···
 			interrupt-names = "tx", "rx";
 			dmas = <&edma_xbar 139 1>, <&edma_xbar 138 1>;
 			dma-names = "tx", "rx";
-			clocks = <&l4per_clkctrl DRA7_MCASP6_CLKCTRL 22>,
-				 <&l4per_clkctrl DRA7_MCASP6_CLKCTRL 24>;
+			clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP6_CLKCTRL 22>,
+				 <&l4per2_clkctrl DRA7_L4PER2_MCASP6_CLKCTRL 24>;
 			clock-names = "fck", "ahclkx";
 			status = "disabled";
 		};
···
 			interrupt-names = "tx", "rx";
 			dmas = <&edma_xbar 141 1>, <&edma_xbar 140 1>;
 			dma-names = "tx", "rx";
-			clocks = <&l4per_clkctrl DRA7_MCASP7_CLKCTRL 22>,
-				 <&l4per_clkctrl DRA7_MCASP7_CLKCTRL 24>;
+			clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP7_CLKCTRL 22>,
+				 <&l4per2_clkctrl DRA7_L4PER2_MCASP7_CLKCTRL 24>;
 			clock-names = "fck", "ahclkx";
 			status = "disabled";
 		};
···
 			interrupt-names = "tx", "rx";
 			dmas = <&edma_xbar 143 1>, <&edma_xbar 142 1>;
 			dma-names = "tx", "rx";
-			clocks = <&l4per_clkctrl DRA7_MCASP8_CLKCTRL 22>,
-				 <&l4per_clkctrl DRA7_MCASP8_CLKCTRL 24>;
+			clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP8_CLKCTRL 22>,
+				 <&l4per2_clkctrl DRA7_L4PER2_MCASP8_CLKCTRL 24>;
 			clock-names = "fck", "ahclkx";
 			status = "disabled";
 		};
···
 		mac: ethernet@48484000 {
 			compatible = "ti,dra7-cpsw","ti,cpsw";
 			ti,hwmods = "gmac";
-			clocks = <&gmac_main_clk>, <&l3init_clkctrl DRA7_GMAC_CLKCTRL 25>;
+			clocks = <&gmac_main_clk>, <&gmac_clkctrl DRA7_GMAC_GMAC_CLKCTRL 25>;
 			clock-names = "fck", "cpts";
 			cpdma_channels = <8>;
 			ale_entries = <1024>;
···
 			reg = <0x4ae3c000 0x2000>;
 			syscon-raminit = <&scm_conf 0x558 0>;
 			interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&wkupaon_clkctrl DRA7_DCAN1_CLKCTRL 24>;
+			clocks = <&wkupaon_clkctrl DRA7_WKUPAON_DCAN1_CLKCTRL 24>;
 			status = "disabled";
 		};
 
···
 				reg = <0x58001000 0x1000>;
 				interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
 				ti,hwmods = "dss_dispc";
-				clocks = <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 8>;
+				clocks = <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 8>;
 				clock-names = "fck";
 				/* CTRL_CORE_SMA_SW_1 */
 				syscon-pol = <&scm_conf 0x534>;
···
 				interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
 				ti,hwmods = "dss_hdmi";
-				clocks = <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 9>,
-					 <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 10>;
+				clocks = <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 9>,
+					 <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 10>;
 				clock-names = "fck", "sys_clk";
 				dmas = <&sdma_xbar 76>;
 				dma-names = "audio_tx";

arch/arm/boot/dts/dra72-evm-common.dtsi

···
 
 &atl {
 	assigned-clocks = <&abe_dpll_sys_clk_mux>,
-			  <&atl_clkctrl DRA7_ATL_CLKCTRL 26>,
+			  <&atl_clkctrl DRA7_ATL_ATL_CLKCTRL 26>,
 			  <&dpll_abe_ck>,
 			  <&dpll_abe_m2x2_ck>,
 			  <&atl_clkin2_ck>;
···
 &mcasp3 {
 	#sound-dai-cells = <0>;
 
-	assigned-clocks = <&l4per_clkctrl DRA7_MCASP3_CLKCTRL 24>;
+	assigned-clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 24>;
 	assigned-clock-parents = <&atl_clkin2_ck>;
 
 	status = "okay";

arch/arm/boot/dts/dra72x.dtsi

···
 	      <0x58004300 0x20>;
 	reg-names = "dss", "pll1_clkctrl", "pll1";
 
-	clocks = <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 8>,
-		 <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 12>;
+	clocks = <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 8>,
+		 <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 12>;
 	clock-names = "fck", "video1_clk";
 };
 

arch/arm/boot/dts/dra74x.dtsi

···
 	reg-names = "dss", "pll1_clkctrl", "pll1",
 		    "pll2_clkctrl", "pll2";
 
-	clocks = <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 8>,
-		 <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 12>,
-		 <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 13>;
+	clocks = <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 8>,
+		 <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 12>,
+		 <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 13>;
 	clock-names = "fck", "video1_clk", "video2_clk";
 };
 

arch/arm/boot/dts/dra76x.dtsi

···
 			ti,sysc-mask = <(SYSC_OMAP4_SOFTRESET |
 					 SYSC_DRA7_MCAN_ENAWAKEUP)>;
 			ti,syss-mask = <1>;
-			clocks = <&wkupaon_clkctrl DRA7_ADC_CLKCTRL 0>;
+			clocks = <&wkupaon_clkctrl DRA7_WKUPAON_ADC_CLKCTRL 0>;
 			clock-names = "fck";
 
 			m_can0: mcan@1a00 {

arch/arm/boot/dts/dra7xx-clocks.dtsi

···
 	atl_clkin0_ck: atl_clkin0_ck {
 		#clock-cells = <0>;
 		compatible = "ti,dra7-atl-clock";
-		clocks = <&atl_clkctrl DRA7_ATL_CLKCTRL 26>;
+		clocks = <&atl_clkctrl DRA7_ATL_ATL_CLKCTRL 26>;
 	};
 
 	atl_clkin1_ck: atl_clkin1_ck {
 		#clock-cells = <0>;
 		compatible = "ti,dra7-atl-clock";
-		clocks = <&atl_clkctrl DRA7_ATL_CLKCTRL 26>;
+		clocks = <&atl_clkctrl DRA7_ATL_ATL_CLKCTRL 26>;
 	};
 
 	atl_clkin2_ck: atl_clkin2_ck {
 		#clock-cells = <0>;
 		compatible = "ti,dra7-atl-clock";
-		clocks = <&atl_clkctrl DRA7_ATL_CLKCTRL 26>;
+		clocks = <&atl_clkctrl DRA7_ATL_ATL_CLKCTRL 26>;
 	};
 
 	atl_clkin3_ck: atl_clkin3_ck {
 		#clock-cells = <0>;
 		compatible = "ti,dra7-atl-clock";
-		clocks = <&atl_clkctrl DRA7_ATL_CLKCTRL 26>;
+		clocks = <&atl_clkctrl DRA7_ATL_ATL_CLKCTRL 26>;
 	};
 
 	hdmi_clkin_ck: hdmi_clkin_ck {
···
 };
 
 &cm_core_aon {
-	mpu_cm: mpu_cm@300 {
+	mpu_cm: mpu-cm@300 {
 		compatible = "ti,omap4-cm";
 		reg = <0x300 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0 0x300 0x100>;
 
-		mpu_clkctrl: clk@20 {
+		mpu_clkctrl: mpu-clkctrl@20 {
 			compatible = "ti,clkctrl";
 			reg = <0x20 0x4>;
 			#clock-cells = <2>;
 		};
+
 	};
 
-	ipu_cm: ipu_cm@500 {
+	dsp1_cm: dsp1-cm@400 {
+		compatible = "ti,omap4-cm";
+		reg = <0x400 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x400 0x100>;
+
+		dsp1_clkctrl: dsp1-clkctrl@20 {
+			compatible = "ti,clkctrl";
+			reg = <0x20 0x4>;
+			#clock-cells = <2>;
+		};
+
+	};
+
+	ipu_cm: ipu-cm@500 {
 		compatible = "ti,omap4-cm";
 		reg = <0x500 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0 0x500 0x100>;
 
-		ipu_clkctrl: clk@40 {
+		ipu1_clkctrl: ipu1-clkctrl@20 {
 			compatible = "ti,clkctrl";
-			reg = <0x40 0x44>;
+			reg = <0x20 0x4>;
 			#clock-cells = <2>;
 		};
+
+		ipu_clkctrl: ipu-clkctrl@50 {
+			compatible = "ti,clkctrl";
+			reg = <0x50 0x34>;
+			#clock-cells = <2>;
+		};
+
 	};
 
-	rtc_cm: rtc_cm@700 {
+	dsp2_cm: dsp2-cm@600 {
+		compatible = "ti,omap4-cm";
+		reg = <0x600 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x600 0x100>;
+
+		dsp2_clkctrl: dsp2-clkctrl@20 {
+			compatible = "ti,clkctrl";
+			reg = <0x20 0x4>;
+			#clock-cells = <2>;
+		};
+
+	};
+
+	rtc_cm: rtc-cm@700 {
 		compatible = "ti,omap4-cm";
 		reg = <0x700 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0 0x700 0x100>;
 
-		rtc_clkctrl: clk@40 {
+		rtc_clkctrl: rtc-clkctrl@20 {
 			compatible = "ti,clkctrl";
-			reg = <0x40 0x8>;
+			reg = <0x20 0x28>;
 			#clock-cells = <2>;
 		};
 	};
···
 };
 
 &cm_core {
-	coreaon_cm: coreaon_cm@600 {
+	coreaon_cm: coreaon-cm@600 {
 		compatible = "ti,omap4-cm";
 		reg = <0x600 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0 0x600 0x100>;
 
-		coreaon_clkctrl: clk@20 {
+		coreaon_clkctrl: coreaon-clkctrl@20 {
 			compatible = "ti,clkctrl";
 			reg = <0x20 0x1c>;
 			#clock-cells = <2>;
 		};
 	};
 
-	l3main1_cm: l3main1_cm@700 {
+	l3main1_cm: l3main1-cm@700 {
 		compatible = "ti,omap4-cm";
 		reg = <0x700 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0 0x700 0x100>;
 
-		l3main1_clkctrl: clk@20 {
+		l3main1_clkctrl: l3main1-clkctrl@20 {
 			compatible = "ti,clkctrl";
 			reg = <0x20 0x74>;
 			#clock-cells = <2>;
 		};
+
 	};
 
-	dma_cm: dma_cm@a00 {
+	ipu2_cm: ipu2-cm@900 {
+		compatible = "ti,omap4-cm";
+		reg = <0x900 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x900 0x100>;
+
+		ipu2_clkctrl: ipu2-clkctrl@20 {
+			compatible = "ti,clkctrl";
+			reg = <0x20 0x4>;
+			#clock-cells = <2>;
+		};
+
+	};
+
+	dma_cm: dma-cm@a00 {
 		compatible = "ti,omap4-cm";
 		reg = <0xa00 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0 0xa00 0x100>;
 
-		dma_clkctrl: clk@20 {
+		dma_clkctrl: dma-clkctrl@20 {
 			compatible = "ti,clkctrl";
 			reg = <0x20 0x4>;
 			#clock-cells = <2>;
 		};
 	};
 
-	emif_cm: emif_cm@b00 {
+	emif_cm: emif-cm@b00 {
 		compatible = "ti,omap4-cm";
 		reg = <0xb00 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0 0xb00 0x100>;
 
-		emif_clkctrl: clk@20 {
+		emif_clkctrl: emif-clkctrl@20 {
 			compatible = "ti,clkctrl";
 			reg = <0x20 0x4>;
 			#clock-cells = <2>;
 		};
 	};
 
-	atl_cm: atl_cm@c00 {
+	atl_cm: atl-cm@c00 {
 		compatible = "ti,omap4-cm";
 		reg = <0xc00 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0 0xc00 0x100>;
 
-		atl_clkctrl: clk@0 {
+		atl_clkctrl: atl-clkctrl@0 {
 			compatible = "ti,clkctrl";
 			reg = <0x0 0x4>;
 			#clock-cells = <2>;
 		};
 	};
 
-	l4cfg_cm: l4cfg_cm@d00 {
+	l4cfg_cm: l4cfg-cm@d00 {
 		compatible = "ti,omap4-cm";
 		reg = <0xd00 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0 0xd00 0x100>;
 
-		l4cfg_clkctrl: clk@20 {
+		l4cfg_clkctrl: l4cfg-clkctrl@20 {
 			compatible = "ti,clkctrl";
 			reg = <0x20 0x84>;
 			#clock-cells = <2>;
 		};
 	};
 
-	l3instr_cm: l3instr_cm@e00 {
+	l3instr_cm: l3instr-cm@e00 {
 		compatible = "ti,omap4-cm";
 		reg = <0xe00 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0 0xe00 0x100>;
 
-		l3instr_clkctrl: clk@20 {
+		l3instr_clkctrl: l3instr-clkctrl@20 {
 			compatible = "ti,clkctrl";
 			reg = <0x20 0xc>;
 			#clock-cells = <2>;
 		};
 	};
 
-	dss_cm: dss_cm@1100 {
+	dss_cm: dss-cm@1100 {
 		compatible = "ti,omap4-cm";
 		reg = <0x1100 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0 0x1100 0x100>;
 
-		dss_clkctrl: clk@20 {
+		dss_clkctrl: dss-clkctrl@20 {
 			compatible = "ti,clkctrl";
 			reg = <0x20 0x14>;
 			#clock-cells = <2>;
 		};
 	};
 
-	l3init_cm: l3init_cm@1300 {
+	l3init_cm: l3init-cm@1300 {
 		compatible = "ti,omap4-cm";
 		reg = <0x1300 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0 0x1300 0x100>;
 
-		l3init_clkctrl: clk@20 {
+		l3init_clkctrl: l3init-clkctrl@20 {
 			compatible = "ti,clkctrl";
-			reg = <0x20 0xd4>;
+			reg = <0x20 0x6c>, <0xe0 0x14>;
 			#clock-cells = <2>;
 		};
+
+		pcie_clkctrl: pcie-clkctrl@b0 {
+			compatible = "ti,clkctrl";
+			reg = <0xb0 0xc>;
+			#clock-cells = <2>;
+		};
+
+		gmac_clkctrl: gmac-clkctrl@d0 {
+			compatible = "ti,clkctrl";
+			reg = <0xd0 0x4>;
+			#clock-cells = <2>;
+		};
+
 	};
 
-	l4per_cm: l4per_cm@1700 {
+	l4per_cm: l4per-cm@1700 {
 		compatible = "ti,omap4-cm";
 		reg = <0x1700 0x300>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0 0x1700 0x300>;
 
-		l4per_clkctrl: clk@0 {
+		l4per_clkctrl: l4per-clkctrl@28 {
 			compatible = "ti,clkctrl";
-			reg = <0x0 0x20c>;
+			reg = <0x28 0x64>, <0xa0 0x24>, <0xf0 0x3c>, <0x140 0x1c>, <0x170 0x4>;
 			#clock-cells = <2>;
 
-			assigned-clocks = <&l4per_clkctrl DRA7_MCASP3_CLKCTRL 24>;
+			assigned-clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 24>;
 			assigned-clock-parents = <&abe_24m_fclk>;
+		};
+
+		l4sec_clkctrl: l4sec-clkctrl@1a0 {
+			compatible = "ti,clkctrl";
+			reg = <0x1a0 0x2c>;
+			#clock-cells = <2>;
+		};
+
+		l4per2_clkctrl: l4per2-clkctrl@c {
+			compatible = "ti,clkctrl";
+			reg = <0xc 0x4>, <0x18 0xc>, <0x90 0xc>, <0xc4 0x4>, <0x138 0x4>, <0x160 0xc>, <0x178 0x24>, <0x1d0 0x3c>;
+			#clock-cells = <2>;
+		};
+
+		l4per3_clkctrl: l4per3-clkctrl@14 {
+			compatible = "ti,clkctrl";
+			reg = <0x14 0x4>, <0xc8 0x14>, <0x130 0x4>;
+			#clock-cells = <2>;
 		};
 	};
 
 };
 
 &prm {
-	wkupaon_cm: wkupaon_cm@1800 {
+	wkupaon_cm: wkupaon-cm@1800 {
 		compatible = "ti,omap4-cm";
 		reg = <0x1800 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0 0x1800 0x100>;
 
-		wkupaon_clkctrl: clk@20 {
+		wkupaon_clkctrl: wkupaon-clkctrl@20 {
 			compatible = "ti,clkctrl";
 			reg = <0x20 0x6c>;
 			#clock-cells = <2>;