net: phy: make use of new MMD accessors

Make use of the new MMD accessors.

v2:
- fix SoB

Signed-off-by: Andrew Lunn <[e-mail]>
Signed-off-by: Heiner Kallweit <[e-mail]>
Reviewed-by: Andrew Lunn <[e-mail]>
Signed-off-by: David S. Miller <[e-mail]>

drivers/net/phy/dp83867.c

···
 {
 	struct dp83867_private *dp83867 =
 		(struct dp83867_private *)phydev->priv;
-	u16 val;
-
-	val = phy_read_mmd(phydev, DP83867_DEVADDR, DP83867_CFG4);
 
 	if (dp83867->port_mirroring == DP83867_PORT_MIRROING_EN)
-		val |= DP83867_CFG4_PORT_MIRROR_EN;
+		phy_set_bits_mmd(phydev, DP83867_DEVADDR, DP83867_CFG4,
+				 DP83867_CFG4_PORT_MIRROR_EN);
 	else
-		val &= ~DP83867_CFG4_PORT_MIRROR_EN;
-
-	phy_write_mmd(phydev, DP83867_DEVADDR, DP83867_CFG4, val);
-
+		phy_clear_bits_mmd(phydev, DP83867_DEVADDR, DP83867_CFG4,
+				   DP83867_CFG4_PORT_MIRROR_EN);
 	return 0;
 }
 
···
 	}
 
 	/* RX_DV/RX_CTRL strapped in mode 1 or mode 2 workaround */
-	if (dp83867->rxctrl_strap_quirk) {
-		val = phy_read_mmd(phydev, DP83867_DEVADDR, DP83867_CFG4);
-		val &= ~BIT(7);
-		phy_write_mmd(phydev, DP83867_DEVADDR, DP83867_CFG4, val);
-	}
+	if (dp83867->rxctrl_strap_quirk)
+		phy_clear_bits_mmd(phydev, DP83867_DEVADDR, DP83867_CFG4,
+				   BIT(7));
 
 	if (phy_interface_is_rgmii(phydev)) {
 		val = phy_read(phydev, MII_DP83867_PHYCTRL);
···
 		phy_write_mmd(phydev, DP83867_DEVADDR, DP83867_RGMIIDCTL,
 			      delay);
 
-		if (dp83867->io_impedance >= 0) {
-			val = phy_read_mmd(phydev, DP83867_DEVADDR,
-					   DP83867_IO_MUX_CFG);
-
-			val &= ~DP83867_IO_MUX_CFG_IO_IMPEDANCE_CTRL;
-			val |= dp83867->io_impedance &
-			       DP83867_IO_MUX_CFG_IO_IMPEDANCE_CTRL;
-
-			phy_write_mmd(phydev, DP83867_DEVADDR,
-				      DP83867_IO_MUX_CFG, val);
-		}
+		if (dp83867->io_impedance >= 0)
+			phy_modify_mmd(phydev, DP83867_DEVADDR, DP83867_IO_MUX_CFG,
+				       DP83867_IO_MUX_CFG_IO_IMPEDANCE_CTRL,
+				       dp83867->io_impedance &
+				       DP83867_IO_MUX_CFG_IO_IMPEDANCE_CTRL);
 	}
 
 	/* Enable Interrupt output INT_OE in CFG3 register */
···
 		dp83867_config_port_mirroring(phydev);
 
 	/* Clock output selection if muxing property is set */
-	if (dp83867->clk_output_sel != DP83867_CLK_O_SEL_REF_CLK) {
-		val = phy_read_mmd(phydev, DP83867_DEVADDR, DP83867_IO_MUX_CFG);
-		val &= ~DP83867_IO_MUX_CFG_CLK_O_SEL_MASK;
-		val |= (dp83867->clk_output_sel << DP83867_IO_MUX_CFG_CLK_O_SEL_SHIFT);
-		phy_write_mmd(phydev, DP83867_DEVADDR, DP83867_IO_MUX_CFG, val);
-	}
+	if (dp83867->clk_output_sel != DP83867_CLK_O_SEL_REF_CLK)
+		phy_modify_mmd(phydev, DP83867_DEVADDR, DP83867_IO_MUX_CFG,
+			       DP83867_IO_MUX_CFG_CLK_O_SEL_MASK,
+			       dp83867->clk_output_sel <<
+			       DP83867_IO_MUX_CFG_CLK_O_SEL_SHIFT);
 
 	return 0;
 }

drivers/net/phy/dp83tc811.c

···
 		phy_write_mmd(phydev, DP83811_DEVADDR, MII_DP83811_WOL_CFG,
 			      value);
 	} else {
-		value = phy_read_mmd(phydev, DP83811_DEVADDR,
-				     MII_DP83811_WOL_CFG);
-		value &= ~DP83811_WOL_EN;
-		phy_write_mmd(phydev, DP83811_DEVADDR, MII_DP83811_WOL_CFG,
-			      value);
+		phy_clear_bits_mmd(phydev, DP83811_DEVADDR, MII_DP83811_WOL_CFG,
+				   DP83811_WOL_EN);
 	}
 
 	return 0;
···
 
 static int dp83811_resume(struct phy_device *phydev)
 {
-	int value;
-
 	genphy_resume(phydev);
 
-	value = phy_read_mmd(phydev, DP83811_DEVADDR, MII_DP83811_WOL_CFG);
-
-	phy_write_mmd(phydev, DP83811_DEVADDR, MII_DP83811_WOL_CFG, value |
-		      DP83811_WOL_CLR_INDICATION);
+	phy_set_bits_mmd(phydev, DP83811_DEVADDR, MII_DP83811_WOL_CFG,
+			 DP83811_WOL_CLR_INDICATION);
 
 	return 0;
 }

drivers/net/phy/marvell10g.c

···
 	char *hwmon_name;
 };
 
-static int mv3310_modify(struct phy_device *phydev, int devad, u16 reg,
-			 u16 mask, u16 bits)
-{
-	int old, val, ret;
-
-	old = phy_read_mmd(phydev, devad, reg);
-	if (old < 0)
-		return old;
-
-	val = (old & ~mask) | (bits & mask);
-	if (val == old)
-		return 0;
-
-	ret = phy_write_mmd(phydev, devad, reg, val);
-
-	return ret < 0 ? ret : 1;
-}
-
 #ifdef CONFIG_HWMON
 static umode_t mv3310_hwmon_is_visible(const void *data,
 				       enum hwmon_sensor_types type,
···
 		return ret;
 
 	val = enable ? MV_V2_TEMP_CTRL_SAMPLE : MV_V2_TEMP_CTRL_DISABLE;
-	ret = mv3310_modify(phydev, MDIO_MMD_VEND2, MV_V2_TEMP_CTRL,
-			    MV_V2_TEMP_CTRL_MASK, val);
+	ret = phy_modify_mmd(phydev, MDIO_MMD_VEND2, MV_V2_TEMP_CTRL,
+			     MV_V2_TEMP_CTRL_MASK, val);
 
 	return ret < 0 ? ret : 0;
 }
···
 	linkmode_and(phydev->advertising, phydev->advertising,
 		     phydev->supported);
 
-	ret = mv3310_modify(phydev, MDIO_MMD_AN, MDIO_AN_ADVERTISE,
-			    ADVERTISE_ALL | ADVERTISE_100BASE4 |
-			    ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM,
-			    linkmode_adv_to_mii_adv_t(phydev->advertising));
+	ret = phy_modify_mmd(phydev, MDIO_MMD_AN, MDIO_AN_ADVERTISE,
+			     ADVERTISE_ALL | ADVERTISE_100BASE4 |
+			     ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM,
+			     linkmode_adv_to_mii_adv_t(phydev->advertising));
 	if (ret < 0)
 		return ret;
 	if (ret > 0)
 		changed = true;
 
 	reg = linkmode_adv_to_mii_ctrl1000_t(phydev->advertising);
-	ret = mv3310_modify(phydev, MDIO_MMD_AN, MV_AN_CTRL1000,
-			    ADVERTISE_1000FULL | ADVERTISE_1000HALF, reg);
+	ret = phy_modify_mmd(phydev, MDIO_MMD_AN, MV_AN_CTRL1000,
+			     ADVERTISE_1000FULL | ADVERTISE_1000HALF, reg);
 	if (ret < 0)
 		return ret;
 	if (ret > 0)
···
 	else
 		reg = 0;
 
-	ret = mv3310_modify(phydev, MDIO_MMD_AN, MDIO_AN_10GBT_CTRL,
-			    MDIO_AN_10GBT_CTRL_ADV10G, reg);
+	ret = phy_modify_mmd(phydev, MDIO_MMD_AN, MDIO_AN_10GBT_CTRL,
+			     MDIO_AN_10GBT_CTRL_ADV10G, reg);
 	if (ret < 0)
 		return ret;
 	if (ret > 0)

drivers/net/phy/phy-c45.c

···
  */
 int genphy_c45_an_disable_aneg(struct phy_device *phydev)
 {
-	int val;
 
-	val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_CTRL1);
-	if (val < 0)
-		return val;
-
-	val &= ~(MDIO_AN_CTRL1_ENABLE | MDIO_AN_CTRL1_RESTART);
-
-	return phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_CTRL1, val);
+	return phy_clear_bits_mmd(phydev, MDIO_MMD_AN, MDIO_CTRL1,
+				  MDIO_AN_CTRL1_ENABLE | MDIO_AN_CTRL1_RESTART);
 }
 EXPORT_SYMBOL_GPL(genphy_c45_an_disable_aneg);
 
···
  */
 int genphy_c45_restart_aneg(struct phy_device *phydev)
 {
-	int val;
-
-	val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_CTRL1);
-	if (val < 0)
-		return val;
-
-	val |= MDIO_AN_CTRL1_ENABLE | MDIO_AN_CTRL1_RESTART;
-
-	return phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_CTRL1, val);
+	return phy_set_bits_mmd(phydev, MDIO_MMD_AN, MDIO_CTRL1,
+				MDIO_AN_CTRL1_ENABLE | MDIO_AN_CTRL1_RESTART);
 }
 EXPORT_SYMBOL_GPL(genphy_c45_restart_aneg);
 

drivers/net/phy/phy.c

···
 		if (!phy_check_valid(phydev->speed, phydev->duplex, common))
 			goto eee_exit_err;
 
-		if (clk_stop_enable) {
+		if (clk_stop_enable)
 			/* Configure the PHY to stop receiving xMII
 			 * clock while it is signaling LPI.
 			 */
-			int val = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL1);
-			if (val < 0)
-				return val;
-
-			val |= MDIO_PCS_CTRL1_CLKSTOP_EN;
-			phy_write_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL1, val);
-		}
+			phy_set_bits_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL1,
+					 MDIO_PCS_CTRL1_CLKSTOP_EN);
 
 		return 0; /* EEE supported */
 	}