tjh.dev / kernel
Linux kernel mirror (for testing) git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
kernel os linux
fork atom

USB: pl2303: another product ID

Device like this http://aldiga.com/english/A-100-USB-EDGE10.htm
contains Prolific 2303 chip.
Actually their site a bit outdated - I have AlDiga AL-11U
GSM/GPRS/EDGE modem and it works with pl2303 module after adding
corresponding product ID.

By default modem uses baud rate 460800. GSM chipset - SIMCom SIM600,
quad band 850/900/1800/1900 MHz

Device info:

T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 5 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=067b ProdID=0611 Rev= 0.00
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=pl2303
E: Ad=81(I) Atr=03(Int.) MxPS= 10 Ivl=1ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms

From: Max Arnold <lwarxx@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

authored by

Max Arnold and committed by
Greg Kroah-Hartman b483b6aa 392e1d98

+2
+1
drivers/usb/serial/pl2303.c
··· 55 55 { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_DCU11) }, 56 56 { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_RSAQ3) }, 57 57 { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_PHAROS) }, 58 + { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_ALDIGA) }, 58 59 { USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID) }, 59 60 { USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID_RSAQ5) }, 60 61 { USB_DEVICE(ATEN_VENDOR_ID, ATEN_PRODUCT_ID) },
+1
drivers/usb/serial/pl2303.h
··· 13 13 #define PL2303_PRODUCT_ID_DCU11 0x1234 14 14 #define PL2303_PRODUCT_ID_PHAROS 0xaaa0 15 15 #define PL2303_PRODUCT_ID_RSAQ3 0xaaa2 16 + #define PL2303_PRODUCT_ID_ALDIGA 0x0611 16 17 17 18 #define ATEN_VENDOR_ID 0x0557 18 19 #define ATEN_VENDOR_ID2 0x0547