soc: qcom: geni-se: add GP_LENGTH/IRQ_EN_SET/IRQ_EN_CLEAR registers

For UART devices the M_GP_LENGTH is the TX word count. For other
devices this is the transaction word count.

For UART devices the S_GP_LENGTH is the RX word count.

The IRQ_EN set/clear registers allow you to set or clear bits in the
IRQ_EN register without needing a read-modify-write.

Acked-by: Bjorn Andersson <[e-mail]>
Signed-off-by: Douglas Anderson <[e-mail]>
Link: https://lore.kernel.org/r/20240610152420.v4.1.Ife7ced506aef1be3158712aa3ff34a006b973559@changeid
Tested-by: Nícolas F. R. A. Prado <[e-mail]>
Signed-off-by: Johan Hovold <[e-mail]>
Link: https://lore.kernel.org/r/[e-mail]
Signed-off-by: Greg Kroah-Hartman <[e-mail]>

include/linux/soc/qcom/geni-se.h

···
 #define SE_GENI_M_IRQ_STATUS		0x610
 #define SE_GENI_M_IRQ_EN		0x614
 #define SE_GENI_M_IRQ_CLEAR		0x618
+#define SE_GENI_M_IRQ_EN_SET		0x61c
+#define SE_GENI_M_IRQ_EN_CLEAR		0x620
 #define SE_GENI_S_CMD0			0x630
 #define SE_GENI_S_CMD_CTRL_REG		0x634
 #define SE_GENI_S_IRQ_STATUS		0x640
 #define SE_GENI_S_IRQ_EN		0x644
 #define SE_GENI_S_IRQ_CLEAR		0x648
+#define SE_GENI_S_IRQ_EN_SET		0x64c
+#define SE_GENI_S_IRQ_EN_CLEAR		0x650
 #define SE_GENI_TX_FIFOn		0x700
 #define SE_GENI_RX_FIFOn		0x780
 #define SE_GENI_TX_FIFO_STATUS		0x800
···
 #define SE_GENI_RX_WATERMARK_REG	0x810
 #define SE_GENI_RX_RFR_WATERMARK_REG	0x814
 #define SE_GENI_IOS			0x908
+#define SE_GENI_M_GP_LENGTH		0x910
+#define SE_GENI_S_GP_LENGTH		0x914
 #define SE_DMA_TX_IRQ_STAT		0xc40
 #define SE_DMA_TX_IRQ_CLR		0xc44
 #define SE_DMA_TX_FSM_RST		0xc58
···
 /* SE_GENI_IOS fields */
 #define IO2_DATA_IN			BIT(1)
 #define RX_DATA_IN			BIT(0)
+
+/* SE_GENI_M_GP_LENGTH and SE_GENI_S_GP_LENGTH fields */
+#define GP_LENGTH			GENMASK(31, 0)
 
 /* SE_DMA_TX_IRQ_STAT Register fields */
 #define TX_DMA_DONE			BIT(0)