Merge remote-tracking branch 'kumar/next' into next

Freescale updates for 3.6

arch/powerpc/Kconfig

···
 config FSL_SOC
 	bool
 	select HAVE_CAN_FLEXCAN if NET && CAN
-	select PPC_CLOCK if CAN_FLEXCAN
+	select PPC_CLOCK
 
 config FSL_PCI
  	bool

arch/powerpc/boot/Makefile

···
 image-$(CONFIG_TQM8555)			+= cuImage.tqm8555
 image-$(CONFIG_TQM8560)			+= cuImage.tqm8560
 image-$(CONFIG_SBC8548)			+= cuImage.sbc8548
-image-$(CONFIG_SBC8560)			+= cuImage.sbc8560
 image-$(CONFIG_KSI8560)			+= cuImage.ksi8560
 
 # Board ports in arch/powerpc/platform/embedded6xx/Kconfig

arch/powerpc/boot/dts/bsc9131rdb.dts

···
+/*
+ * BSC9131 RDB Device Tree Source
+ *
+ * Copyright 2011-2012 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/include/ "fsl/bsc9131si-pre.dtsi"
+
+/ {
+	model = "fsl,bsc9131rdb";
+	compatible = "fsl,bsc9131rdb";
+
+	memory {
+		device_type = "memory";
+	};
+
+	board_ifc: ifc: ifc@ff71e000 {
+		/* NAND Flash on board */
+		ranges = <0x0 0x0 0x0 0xff800000 0x00004000>;
+		reg = <0x0 0xff71e000 0x0 0x2000>;
+	};
+
+	board_soc: soc: soc@ff700000 {
+		ranges = <0x0 0x0 0xff700000 0x100000>;
+	};
+};
+
+/include/ "bsc9131rdb.dtsi"
+/include/ "fsl/bsc9131si-post.dtsi"

arch/powerpc/boot/dts/bsc9131rdb.dtsi

···
+/*
+ * BSC9131 RDB Device Tree Source stub (no addresses or top-level ranges)
+ *
+ * Copyright 2011-2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&board_ifc {
+
+	nand@0,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,ifc-nand";
+		reg = <0x0 0x0 0x4000>;
+
+		partition@0 {
+			/* This location must not be altered  */
+			/* 3MB for u-boot Bootloader Image */
+			reg = <0x0 0x00300000>;
+			label = "NAND U-Boot Image";
+			read-only;
+		};
+
+		partition@300000 {
+			/* 1MB for DTB Image */
+			reg = <0x00300000 0x00100000>;
+			label = "NAND DTB Image";
+		};
+
+		partition@400000 {
+			/* 8MB for Linux Kernel Image */
+			reg = <0x00400000 0x00800000>;
+			label = "NAND Linux Kernel Image";
+		};
+
+		partition@c00000 {
+			/* Rest space for Root file System Image */
+			reg = <0x00c00000 0x07400000>;
+			label = "NAND RFS Image";
+		};
+	};
+};
+
+&board_soc {
+	/* BSC9131RDB does not have any device on i2c@3100 */
+	i2c@3100 {
+		status = "disabled";
+	};
+
+	spi@7000 {
+		flash@0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "spansion,s25sl12801";
+			reg = <0>;
+			spi-max-frequency = <50000000>;
+
+			/* 512KB for u-boot Bootloader Image */
+			partition@0 {
+				reg = <0x0 0x00080000>;
+				label = "SPI Flash U-Boot Image";
+				read-only;
+			};
+
+			/* 512KB for DTB Image */
+			partition@80000 {
+				reg = <0x00080000 0x00080000>;
+				label = "SPI Flash DTB Image";
+			};
+
+			/* 4MB for Linux Kernel Image */
+			partition@100000 {
+				reg = <0x00100000 0x00400000>;
+				label = "SPI Flash Kernel Image";
+			};
+
+			/*11MB for RFS Image */
+			partition@500000 {
+				reg = <0x00500000 0x00B00000>;
+				label = "SPI Flash RFS Image";
+			};
+
+		};
+	};
+
+	usb@22000 {
+		phy_type = "ulpi";
+	};
+
+	mdio@24000 {
+		phy0: ethernet-phy@0 {
+			interrupts = <3 1 0 0>;
+			reg = <0x0>;
+		};
+
+		phy1: ethernet-phy@1 {
+			interrupts = <2 1 0 0>;
+			reg = <0x3>;
+		};
+	};
+
+	sdhci@2e000 {
+		status = "disabled";
+	};
+
+	enet0: ethernet@b0000 {
+		phy-handle = <&phy0>;
+		phy-connection-type = "rgmii-id";
+	};
+
+	enet1: ethernet@b1000 {
+		phy-handle = <&phy1>;
+		phy-connection-type = "rgmii-id";
+	};
+};

arch/powerpc/boot/dts/fsl/bsc9131si-post.dtsi

···
+/*
+ * BSC9131 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011-2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&ifc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	compatible = "fsl,ifc", "simple-bus";
+	interrupts = <16 2 0 0 20 2 0 0>;
+};
+
+&soc {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	device_type = "soc";
+	compatible = "fsl,bsc9131-immr", "simple-bus";
+	bus-frequency = <0>;		// Filled out by uboot.
+
+	ecm-law@0 {
+		compatible = "fsl,ecm-law";
+		reg = <0x0 0x1000>;
+		fsl,num-laws = <12>;
+	};
+
+	ecm@1000 {
+		compatible = "fsl,bsc9131-ecm", "fsl,ecm";
+		reg = <0x1000 0x1000>;
+		interrupts = <16 2 0 0>;
+	};
+
+	memory-controller@2000 {
+		compatible = "fsl,bsc9131-memory-controller";
+		reg = <0x2000 0x1000>;
+		interrupts = <16 2 0 0>;
+	};
+
+/include/ "pq3-i2c-0.dtsi"
+	i2c@3000 {
+		interrupts = <17 2 0 0>;
+	};
+
+/include/ "pq3-i2c-1.dtsi"
+	i2c@3100 {
+		interrupts = <17 2 0 0>;
+	};
+
+/include/ "pq3-duart-0.dtsi"
+	serial0: serial@4500 {
+		interrupts = <18 2 0 0>;
+	};
+
+	serial1: serial@4600 {
+		interrupts = <18 2 0 0 >;
+	};
+/include/ "pq3-espi-0.dtsi"
+	spi0: spi@7000 {
+		fsl,espi-num-chipselects = <1>;
+		interrupts = <22 0x2 0 0>;
+	};
+
+/include/ "pq3-gpio-0.dtsi"
+	gpio-controller@f000 {
+		interrupts = <19 0x2 0 0>;
+		};
+
+	L2: l2-cache-controller@20000 {
+		compatible = "fsl,bsc9131-l2-cache-controller";
+		reg = <0x20000 0x1000>;
+		cache-line-size = <32>;	// 32 bytes
+		cache-size = <0x40000>; // L2,256K
+		interrupts = <16 2 0 0>;
+	};
+
+/include/ "pq3-dma-0.dtsi"
+
+dma@21300 {
+
+	dma-channel@0 {
+		interrupts = <62 2 0 0>;
+	};
+
+	dma-channel@80 {
+		interrupts = <63 2 0 0>;
+	};
+
+	dma-channel@100 {
+		interrupts = <64 2 0 0>;
+	};
+
+	dma-channel@180 {
+		interrupts = <65 2 0 0>;
+	};
+};
+
+/include/ "pq3-usb2-dr-0.dtsi"
+usb@22000 {
+	compatible = "fsl-usb2-dr","fsl-usb2-dr-v2.2";
+	interrupts = <40 0x2 0 0>;
+};
+
+/include/ "pq3-esdhc-0.dtsi"
+	sdhc@2e000 {
+		fsl,sdhci-auto-cmd12;
+		interrupts = <41 0x2 0 0>;
+	};
+
+/include/ "pq3-sec4.4-0.dtsi"
+crypto@30000 {
+	interrupts	 = <57 2 0 0>;
+
+	sec_jr0: jr@1000 {
+		interrupts	 = <58 2 0 0>;
+	};
+
+	sec_jr1: jr@2000 {
+		interrupts	 = <59 2 0 0>;
+	};
+
+	sec_jr2: jr@3000 {
+		interrupts	 = <60 2 0 0>;
+	};
+
+	sec_jr3: jr@4000 {
+		interrupts	 = <61 2 0 0>;
+	};
+};
+
+/include/ "pq3-mpic.dtsi"
+
+timer@41100 {
+	compatible = "fsl,mpic-v1.2-msgr", "fsl,mpic-msg";
+	reg = <0x41400 0x200>;
+	interrupts = <
+		0xb0 2
+		0xb1 2
+		0xb2 2
+		0xb3 2>;
+};
+
+/include/ "pq3-etsec2-0.dtsi"
+enet0: ethernet@b0000 {
+	queue-group@b0000 {
+		fsl,rx-bit-map = <0xff>;
+		fsl,tx-bit-map = <0xff>;
+		interrupts = <26 2 0 0 27 2 0 0 28 2 0 0>;
+	};
+};
+
+/include/ "pq3-etsec2-1.dtsi"
+enet1: ethernet@b1000 {
+	queue-group@b1000 {
+		fsl,rx-bit-map = <0xff>;
+		fsl,tx-bit-map = <0xff>;
+		interrupts = <33 2 0 0 34 2 0 0 35 2 0 0>;
+	};
+};
+
+global-utilities@e0000 {
+		compatible = "fsl,bsc9131-guts";
+		reg = <0xe0000 0x1000>;
+		fsl,has-rstcr;
+	};
+};

arch/powerpc/boot/dts/fsl/p1021si-post.dtsi

···
 /*
  * P1021/P1012 Silicon/SoC Device Tree Source (post include)
  *
- * Copyright 2011 Freescale Semiconductor Inc.
+ * Copyright 2011-2012 Freescale Semiconductor Inc.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
···
 		cell-index = <5>;
 		reg = <0x2400 0x200>;
 		interrupts = <40>;
+		interrupt-parent = <&qeic>;
+	};
+
+	ucc@2600 {
+		cell-index = <7>;
+		reg = <0x2600 0x200>;
+		interrupts = <42>;
+		interrupt-parent = <&qeic>;
+	};
+
+	ucc@2200 {
+		cell-index = <3>;
+		reg = <0x2200 0x200>;
+		interrupts = <34>;
 		interrupt-parent = <&qeic>;
 	};
 

arch/powerpc/boot/dts/fsl/p3060si-post.dtsi

···
-/*
- * P3060 Silicon/SoC Device Tree Source (post include)
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-&lbc {
-	compatible = "fsl,p3060-elbc", "fsl,elbc", "simple-bus";
-	interrupts = <25 2 0 0>;
-	#address-cells = <2>;
-	#size-cells = <1>;
-};
-
-/* controller at 0x200000 */
-&pci0 {
-	compatible = "fsl,p3060-pcie", "fsl,qoriq-pcie-v2.2";
-	device_type = "pci";
-	#size-cells = <2>;
-	#address-cells = <3>;
-	bus-range = <0x0 0xff>;
-	clock-frequency = <33333333>;
-	interrupts = <16 2 1 15>;
-	pcie@0 {
-		reg = <0 0 0 0 0>;
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		device_type = "pci";
-		interrupts = <16 2 1 15>;
-		interrupt-map-mask = <0xf800 0 0 7>;
-		interrupt-map = <
-			/* IDSEL 0x0 */
-			0000 0 0 1 &mpic 40 1 0 0
-			0000 0 0 2 &mpic 1 1 0 0
-			0000 0 0 3 &mpic 2 1 0 0
-			0000 0 0 4 &mpic 3 1 0 0
-			>;
-	};
-};
-
-/* controller at 0x201000 */
-&pci1 {
-	compatible = "fsl,p3060-pcie", "fsl,qoriq-pcie-v2.2";
-	device_type = "pci";
-	#size-cells = <2>;
-	#address-cells = <3>;
-	bus-range = <0 0xff>;
-	clock-frequency = <33333333>;
-	interrupts = <16 2 1 14>;
-	pcie@0 {
-		reg = <0 0 0 0 0>;
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		device_type = "pci";
-		interrupts = <16 2 1 14>;
-		interrupt-map-mask = <0xf800 0 0 7>;
-		interrupt-map = <
-			/* IDSEL 0x0 */
-			0000 0 0 1 &mpic 41 1 0 0
-			0000 0 0 2 &mpic 5 1 0 0
-			0000 0 0 3 &mpic 6 1 0 0
-			0000 0 0 4 &mpic 7 1 0 0
-			>;
-	};
-};
-
-&rio {
-	compatible = "fsl,srio";
-	interrupts = <16 2 1 11>;
-	#address-cells = <2>;
-	#size-cells = <2>;
-	fsl,srio-rmu-handle = <&rmu>;
-	ranges;
-
-	port1 {
-		#address-cells = <2>;
-		#size-cells = <2>;
-		cell-index = <1>;
-	};
-
-	port2 {
-		#address-cells = <2>;
-		#size-cells = <2>;
-		cell-index = <2>;
-	};
-};
-
-&dcsr {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	compatible = "fsl,dcsr", "simple-bus";
-
-	dcsr-epu@0 {
-		compatible = "fsl,dcsr-epu";
-		interrupts = <52 2 0 0
-			      84 2 0 0
-			      85 2 0 0>;
-		reg = <0x0 0x1000>;
-	};
-	dcsr-npc {
-		compatible = "fsl,dcsr-npc";
-		reg = <0x1000 0x1000 0x1000000 0x8000>;
-	};
-	dcsr-nxc@2000 {
-		compatible = "fsl,dcsr-nxc";
-		reg = <0x2000 0x1000>;
-	};
-	dcsr-corenet {
-		compatible = "fsl,dcsr-corenet";
-		reg = <0x8000 0x1000 0xB0000 0x1000>;
-	};
-	dcsr-dpaa@9000 {
-		compatible = "fsl,p3060-dcsr-dpaa", "fsl,dcsr-dpaa";
-		reg = <0x9000 0x1000>;
-	};
-	dcsr-ocn@11000 {
-		compatible = "fsl,p3060-dcsr-ocn", "fsl,dcsr-ocn";
-		reg = <0x11000 0x1000>;
-	};
-	dcsr-ddr@12000 {
-		compatible = "fsl,dcsr-ddr";
-		dev-handle = <&ddr1>;
-		reg = <0x12000 0x1000>;
-	};
-	dcsr-nal@18000 {
-		compatible = "fsl,p3060-dcsr-nal", "fsl,dcsr-nal";
-		reg = <0x18000 0x1000>;
-	};
-	dcsr-rcpm@22000 {
-		compatible = "fsl,p3060-dcsr-rcpm", "fsl,dcsr-rcpm";
-		reg = <0x22000 0x1000>;
-	};
-	dcsr-cpu-sb-proxy@40000 {
-		compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
-		cpu-handle = <&cpu0>;
-		reg = <0x40000 0x1000>;
-	};
-	dcsr-cpu-sb-proxy@41000 {
-		compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
-		cpu-handle = <&cpu1>;
-		reg = <0x41000 0x1000>;
-	};
-	dcsr-cpu-sb-proxy@44000 {
-		compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
-		cpu-handle = <&cpu4>;
-		reg = <0x44000 0x1000>;
-	};
-	dcsr-cpu-sb-proxy@45000 {
-		compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
-		cpu-handle = <&cpu5>;
-		reg = <0x45000 0x1000>;
-	};
-	dcsr-cpu-sb-proxy@46000 {
-		compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
-		cpu-handle = <&cpu6>;
-		reg = <0x46000 0x1000>;
-	};
-	dcsr-cpu-sb-proxy@47000 {
-		compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
-		cpu-handle = <&cpu7>;
-		reg = <0x47000 0x1000>;
-	};
-
-};
-
-&soc {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	device_type = "soc";
-	compatible = "simple-bus";
-
-	soc-sram-error {
-		compatible = "fsl,soc-sram-error";
-		interrupts = <16 2 1 29>;
-	};
-
-	corenet-law@0 {
-		compatible = "fsl,corenet-law";
-		reg = <0x0 0x1000>;
-		fsl,num-laws = <32>;
-	};
-
-	ddr1: memory-controller@8000 {
-		compatible = "fsl,qoriq-memory-controller-v4.4", "fsl,qoriq-memory-controller";
-		reg = <0x8000 0x1000>;
-		interrupts = <16 2 1 23>;
-	};
-
-	cpc: l3-cache-controller@10000 {
-		compatible = "fsl,p3060-l3-cache-controller", "cache";
-		reg = <0x10000 0x1000
-		       0x11000 0x1000>;
-		interrupts = <16 2 1 27
-			      16 2 1 26>;
-	};
-
-	corenet-cf@18000 {
-		compatible = "fsl,corenet-cf";
-		reg = <0x18000 0x1000>;
-		interrupts = <16 2 1 31>;
-		fsl,ccf-num-csdids = <32>;
-		fsl,ccf-num-snoopids = <32>;
-	};
-
-	iommu@20000 {
-		compatible = "fsl,pamu-v1.0", "fsl,pamu";
-		reg = <0x20000 0x5000>;
-		interrupts = <
-			24 2 0 0
-			16 2 1 30>;
-	};
-
-/include/ "qoriq-rmu-0.dtsi"
-/include/ "qoriq-mpic.dtsi"
-
-	guts: global-utilities@e0000 {
-		compatible = "fsl,qoriq-device-config-1.0";
-		reg = <0xe0000 0xe00>;
-		fsl,has-rstcr;
-		#sleep-cells = <1>;
-		fsl,liodn-bits = <12>;
-	};
-
-	pins: global-utilities@e0e00 {
-		compatible = "fsl,qoriq-pin-control-1.0";
-		reg = <0xe0e00 0x200>;
-		#sleep-cells = <2>;
-	};
-
-	clockgen: global-utilities@e1000 {
-		compatible = "fsl,p3060-clockgen", "fsl,qoriq-clockgen-1.0";
-		reg = <0xe1000 0x1000>;
-		clock-frequency = <0>;
-	};
-
-	rcpm: global-utilities@e2000 {
-		compatible = "fsl,qoriq-rcpm-1.0";
-		reg = <0xe2000 0x1000>;
-		#sleep-cells = <1>;
-	};
-
-	sfp: sfp@e8000 {
-		compatible = "fsl,p3060-sfp", "fsl,qoriq-sfp-1.0";
-		reg	   = <0xe8000 0x1000>;
-	};
-
-	serdes: serdes@ea000 {
-		compatible = "fsl,p3060-serdes";
-		reg	   = <0xea000 0x1000>;
-	};
-
-/include/ "qoriq-dma-0.dtsi"
-/include/ "qoriq-dma-1.dtsi"
-/include/ "qoriq-espi-0.dtsi"
-	spi@110000 {
-		fsl,espi-num-chipselects = <4>;
-	};
-
-/include/ "qoriq-i2c-0.dtsi"
-/include/ "qoriq-i2c-1.dtsi"
-/include/ "qoriq-duart-0.dtsi"
-/include/ "qoriq-duart-1.dtsi"
-/include/ "qoriq-gpio-0.dtsi"
-/include/ "qoriq-usb2-mph-0.dtsi"
-	usb@210000 {
-		compatible = "fsl-usb2-mph-v2.2", "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph";
-	};
-/include/ "qoriq-usb2-dr-0.dtsi"
-	usb@211000 {
-		compatible = "fsl-usb2-dr-v2.2", "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
-	};
-/include/ "qoriq-sec4.1-0.dtsi"
-};

arch/powerpc/boot/dts/fsl/p3060si-pre.dtsi arch/powerpc/boot/dts/p1024rdb_36b.dts

···
 /*
- * P3060 Silicon/SoC Device Tree Source (pre include)
+ * P1024 RDB 36Bit Physical Address Map Device Tree Source
  *
- * Copyright 2011 Freescale Semiconductor Inc.
+ * Copyright 2012 Freescale Semiconductor Inc.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
···
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-/dts-v1/;
+/include/ "fsl/p1020si-pre.dtsi"
 / {
-	compatible = "fsl,P3060";
-	#address-cells = <2>;
-	#size-cells = <2>;
-	interrupt-parent = <&mpic>;
+	model = "fsl,P1024RDB";
+	compatible = "fsl,P1024RDB";
 
-	aliases {
-		ccsr = &soc;
-		dcsr = &dcsr;
-
-		serial0 = &serial0;
-		serial1 = &serial1;
-		serial2 = &serial2;
-		serial3 = &serial3;
-		pci0 = &pci0;
-		pci1 = &pci1;
-		usb0 = &usb0;
-		usb1 = &usb1;
-		dma0 = &dma0;
-		dma1 = &dma1;
-		msi0 = &msi0;
-		msi1 = &msi1;
-		msi2 = &msi2;
-
-		crypto = &crypto;
-		sec_jr0 = &sec_jr0;
-		sec_jr1 = &sec_jr1;
-		sec_jr2 = &sec_jr2;
-		sec_jr3 = &sec_jr3;
-		rtic_a = &rtic_a;
-		rtic_b = &rtic_b;
-		rtic_c = &rtic_c;
-		rtic_d = &rtic_d;
-		sec_mon = &sec_mon;
+	memory {
+		device_type = "memory";
 	};
 
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
+	lbc: localbus@fffe05000 {
+		reg = <0xf 0xffe05000 0 0x1000>;
+		ranges = <0x0 0x0 0xf 0xef000000 0x01000000
+			  0x1 0x0 0xf 0xff800000 0x00040000>;
+	};
 
-		cpu0: PowerPC,e500mc@0 {
-			device_type = "cpu";
-			reg = <0>;
-			next-level-cache = <&L2_0>;
-			L2_0: l2-cache {
-				next-level-cache = <&cpc>;
-			};
+	soc: soc@fffe00000 {
+		ranges = <0x0 0xf 0xffe00000 0x100000>;
+	};
+
+	pci0: pcie@fffe09000 {
+		reg = <0xf 0xffe09000 0 0x1000>;
+		ranges = <0x2000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xe0000000
+				  0x2000000 0x0 0xe0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
 		};
-		cpu1: PowerPC,e500mc@1 {
-			device_type = "cpu";
-			reg = <1>;
-			next-level-cache = <&L2_1>;
-			L2_1: l2-cache {
-				next-level-cache = <&cpc>;
-			};
-		};
-		cpu4: PowerPC,e500mc@4 {
-			device_type = "cpu";
-			reg = <4>;
-			next-level-cache = <&L2_4>;
-			L2_4: l2-cache {
-				next-level-cache = <&cpc>;
-			};
-		};
-		cpu5: PowerPC,e500mc@5 {
-			device_type = "cpu";
-			reg = <5>;
-			next-level-cache = <&L2_5>;
-			L2_5: l2-cache {
-				next-level-cache = <&cpc>;
-			};
-		};
-		cpu6: PowerPC,e500mc@6 {
-			device_type = "cpu";
-			reg = <6>;
-			next-level-cache = <&L2_6>;
-			L2_6: l2-cache {
-				next-level-cache = <&cpc>;
-			};
-		};
-		cpu7: PowerPC,e500mc@7 {
-			device_type = "cpu";
-			reg = <7>;
-			next-level-cache = <&L2_7>;
-			L2_7: l2-cache {
-				next-level-cache = <&cpc>;
-			};
+	};
+
+	pci1: pcie@fffe0a000 {
+		reg = <0xf 0xffe0a000 0 0x1000>;
+		ranges = <0x2000000 0x0 0xe0000000 0xc 0x00000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>;
+		pcie@0 {
+			reg = <0x0 0x0 0x0 0x0 0x0>;
+			ranges = <0x2000000 0x0 0xe0000000
+				  0x2000000 0x0 0xe0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
 		};
 	};
 };
+
+/include/ "p1024rdb.dtsi"
+/include/ "fsl/p1020si-post.dtsi"

arch/powerpc/boot/dts/mgcoge.dts

···
 				interrupt-parent = <&PIC>;
 				usb-clock = <5>;
 			};
+			spi@11aa0 {
+				cell-index = <0>;
+				compatible = "fsl,spi", "fsl,cpm2-spi";
+				reg = <0x11a80 0x40 0x89fc 0x2>;
+				interrupts = <2 8>;
+				interrupt-parent = <&PIC>;
+				gpios = < &cpm2_pio_d 19 0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				ds3106@1 {
+					compatible = "gen,spidev";
+					reg = <0>;
+					spi-max-frequency = <8000000>;
+				};
+			};
+
+		};
+
+		cpm2_pio_d: gpio-controller@10d60 {
+			#gpio-cells = <2>;
+			compatible = "fsl,cpm2-pario-bank";
+			reg = <0x10d60 0x14>;
+			gpio-controller;
 		};
 
 		cpm2_pio_c: gpio-controller@10d40 {

arch/powerpc/boot/dts/mpc8536ds.dtsi

···
 			reg = <1>;
 			device_type = "ethernet-phy";
 		};
+		sgmii_phy0: sgmii-phy@0 {
+			interrupts = <6 1 0 0>;
+			reg = <0x1d>;
+		};
+		sgmii_phy1: sgmii-phy@1 {
+			interrupts = <6 1 0 0>;
+			reg = <0x1c>;
+		};
 		tbi0: tbi-phy@11 {
 			reg = <0x11>;
 			device_type = "tbi-phy";

arch/powerpc/boot/dts/mpc8544ds.dtsi

···
 			device_type = "ethernet-phy";
 		};
 
+		sgmii_phy0: sgmii-phy@0 {
+			interrupts = <6 1 0 0>;
+			reg = <0x1c>;
+		};
+		sgmii_phy1: sgmii-phy@1 {
+			interrupts = <6 1 0 0>;
+			reg = <0x1d>;
+		};
+
 		tbi0: tbi-phy@11 {
 			reg = <0x11>;
 			device_type = "tbi-phy";

arch/powerpc/boot/dts/mpc8572ds.dtsi

···
 			reg = <0x3>;
 		};
 
+		sgmii_phy0: sgmii-phy@0 {
+			interrupts = <6 1 0 0>;
+			reg = <0x1c>;
+		};
+		sgmii_phy1: sgmii-phy@1 {
+			interrupts = <6 1 0 0>;
+			reg = <0x1d>;
+		};
+		sgmii_phy2: sgmii-phy@2 {
+			interrupts = <7 1 0 0>;
+			reg = <0x1e>;
+		};
+		sgmii_phy3: sgmii-phy@3 {
+			interrupts = <7 1 0 0>;
+			reg = <0x1f>;
+		};
+
 		tbi0: tbi-phy@11 {
 			reg = <0x11>;
 			device_type = "tbi-phy";

arch/powerpc/boot/dts/mpc8572ds_camp_core0.dts

···
 		msi@41600 {
 			msi-available-ranges = <0 0x80>;
 			interrupts = <
-				0xe0 0
-				0xe1 0
-				0xe2 0
-				0xe3 0>;
+				0xe0 0 0 0
+				0xe1 0 0 0
+				0xe2 0 0 0
+				0xe3 0 0 0>;
 		};
 		timer@42100 {
 			status = "disabled";

arch/powerpc/boot/dts/mpc8572ds_camp_core1.dts

···
 		ethernet@24000 {
 			status = "disabled";
 		};
-		mdio@24520 {
-			status = "disabled";
-		};
 		ptp_clock@24e00 {
 			status = "disabled";
 		};
···
 		msi@41600 {
 			msi-available-ranges = <0x80 0x80>;
 			interrupts = <
-				0xe4 0
-				0xe5 0
-				0xe6 0
-				0xe7 0>;
+				0xe4 0 0 0
+				0xe5 0 0 0
+				0xe6 0 0 0
+				0xe7 0 0 0>;
 		};
 		global-utilities@e0000 {
 			status = "disabled";

arch/powerpc/boot/dts/p1010rdb.dtsi

···
 
 &board_soc {
 	i2c@3000 {
+		eeprom@50 {
+			compatible = "st,24c256";
+			reg = <0x50>;
+		};
+
 		rtc@68 {
 			compatible = "pericom,pt7c4338";
 			reg = <0x68>;
+		};
+	};
+
+	i2c@3100 {
+		eeprom@52 {
+			compatible = "atmel,24c01";
+			reg = <0x52>;
 		};
 	};
 

arch/powerpc/boot/dts/p1021rdb-pc.dtsi

···
+/*
+ * P1021 RDB Device Tree Source stub (no addresses or top-level ranges)
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+	nor@0,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "cfi-flash";
+		reg = <0x0 0x0 0x1000000>;
+		bank-width = <2>;
+		device-width = <1>;
+
+		partition@0 {
+			/* This location must not be altered  */
+			/* 256KB for Vitesse 7385 Switch firmware */
+			reg = <0x0 0x00040000>;
+			label = "NOR Vitesse-7385 Firmware";
+			read-only;
+		};
+
+		partition@40000 {
+			/* 256KB for DTB Image */
+			reg = <0x00040000 0x00040000>;
+			label = "NOR DTB Image";
+		};
+
+		partition@80000 {
+			/* 3.5 MB for Linux Kernel Image */
+			reg = <0x00080000 0x00380000>;
+			label = "NOR Linux Kernel Image";
+		};
+
+		partition@400000 {
+			/* 11MB for JFFS2 based Root file System */
+			reg = <0x00400000 0x00b00000>;
+			label = "NOR JFFS2 Root File System";
+		};
+
+		partition@f00000 {
+			/* This location must not be altered  */
+			/* 512KB for u-boot Bootloader Image */
+			/* 512KB for u-boot Environment Variables */
+			reg = <0x00f00000 0x00100000>;
+			label = "NOR U-Boot Image";
+		};
+	};
+
+	nand@1,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,p1021-fcm-nand",
+			     "fsl,elbc-fcm-nand";
+		reg = <0x1 0x0 0x40000>;
+
+		partition@0 {
+			/* This location must not be altered  */
+			/* 1MB for u-boot Bootloader Image */
+			reg = <0x0 0x00100000>;
+			label = "NAND U-Boot Image";
+			read-only;
+		};
+
+		partition@100000 {
+			/* 1MB for DTB Image */
+			reg = <0x00100000 0x00100000>;
+			label = "NAND DTB Image";
+		};
+
+		partition@200000 {
+			/* 4MB for Linux Kernel Image */
+			reg = <0x00200000 0x00400000>;
+			label = "NAND Linux Kernel Image";
+		};
+
+		partition@600000 {
+			/* 4MB for Compressed Root file System Image */
+			reg = <0x00600000 0x00400000>;
+			label = "NAND Compressed RFS Image";
+		};
+
+		partition@a00000 {
+			/* 7MB for JFFS2 based Root file System */
+			reg = <0x00a00000 0x00700000>;
+			label = "NAND JFFS2 Root File System";
+		};
+
+		partition@1100000 {
+			/* 15MB for User Writable Area  */
+			reg = <0x01100000 0x00f00000>;
+			label = "NAND Writable User area";
+		};
+	};
+
+	L2switch@2,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "vitesse-7385";
+		reg = <0x2 0x0 0x20000>;
+	};
+};
+
+&soc {
+	i2c@3000 {
+		rtc@68 {
+			compatible = "pericom,pt7c4338";
+			reg = <0x68>;
+		};
+	};
+
+	spi@7000 {
+		flash@0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "spansion,s25sl12801";
+			reg = <0>;
+			spi-max-frequency = <40000000>; /* input clock */
+
+			partition@u-boot {
+				/* 512KB for u-boot Bootloader Image */
+				reg = <0x0 0x00080000>;
+				label = "SPI Flash U-Boot Image";
+				read-only;
+			};
+
+			partition@dtb {
+				/* 512KB for DTB Image */
+				reg = <0x00080000 0x00080000>;
+				label = "SPI Flash DTB Image";
+			};
+
+			partition@kernel {
+				/* 4MB for Linux Kernel Image */
+				reg = <0x00100000 0x00400000>;
+				label = "SPI Flash Linux Kernel Image";
+			};
+
+			partition@fs {
+				/* 4MB for Compressed RFS Image */
+				reg = <0x00500000 0x00400000>;
+				label = "SPI Flash Compressed RFSImage";
+			};
+
+			partition@jffs-fs {
+				/* 7MB for JFFS2 based RFS */
+				reg = <0x00900000 0x00700000>;
+				label = "SPI Flash JFFS2 RFS";
+			};
+		};
+	};
+
+	usb@22000 {
+		phy_type = "ulpi";
+	};
+
+	mdio@24000 {
+		phy0: ethernet-phy@0 {
+			interrupt-parent = <&mpic>;
+			interrupts = <3 1 0 0>;
+			reg = <0x0>;
+		};
+
+		phy1: ethernet-phy@1 {
+			interrupt-parent = <&mpic>;
+			interrupts = <2 1 0 0>;
+			reg = <0x1>;
+		};
+
+		tbi0: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+	};
+
+	mdio@25000 {
+		tbi1: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+	};
+
+	mdio@26000 {
+		tbi2: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+	};
+
+	enet0: ethernet@b0000 {
+		fixed-link = <1 1 1000 0 0>;
+		phy-connection-type = "rgmii-id";
+
+	};
+
+	enet1: ethernet@b1000 {
+		phy-handle = <&phy0>;
+		tbi-handle = <&tbi1>;
+		phy-connection-type = "sgmii";
+	};
+
+	enet2: ethernet@b2000 {
+		phy-handle = <&phy1>;
+		tbi-handle = <&tbi2>;
+		phy-connection-type = "rgmii-id";
+	};
+};

arch/powerpc/boot/dts/p1021rdb-pc_32b.dts

···
+/*
+ * P1021 RDB Device Tree Source
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "fsl/p1021si-pre.dtsi"
+/ {
+	model = "fsl,P1021RDB";
+	compatible = "fsl,P1021RDB-PC";
+
+	memory {
+		device_type = "memory";
+	};
+
+	lbc: localbus@ffe05000 {
+		reg = <0 0xffe05000 0 0x1000>;
+
+		/* NOR, NAND Flashes and Vitesse 5 port L2 switch */
+		ranges = <0x0 0x0 0x0 0xef000000 0x01000000
+			  0x1 0x0 0x0 0xff800000 0x00040000
+			  0x2 0x0 0x0 0xffb00000 0x00020000>;
+	};
+
+	soc: soc@ffe00000 {
+		ranges = <0x0 0x0 0xffe00000 0x100000>;
+	};
+
+	pci0: pcie@ffe09000 {
+		ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
+		reg = <0 0xffe09000 0 0x1000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xa0000000
+				  0x2000000 0x0 0xa0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	pci1: pcie@ffe0a000 {
+		reg = <0 0xffe0a000 0 0x1000>;
+		ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0x80000000
+				  0x2000000 0x0 0x80000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	qe: qe@ffe80000 {
+                ranges = <0x0 0x0 0xffe80000 0x40000>;
+                reg = <0 0xffe80000 0 0x480>;
+                brg-frequency = <0>;
+                bus-frequency = <0>;
+        };
+};
+
+/include/ "p1021rdb-pc.dtsi"
+/include/ "fsl/p1021si-post.dtsi"

arch/powerpc/boot/dts/p1021rdb.dts arch/powerpc/boot/dts/p1021rdb-pc_36b.dts

···
 /*
- * P1021 RDB Device Tree Source
+ * P1021 RDB Device Tree Source (36-bit address map)
  *
- * Copyright 2011 Freescale Semiconductor Inc.
+ * Copyright 2012 Freescale Semiconductor Inc.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
···
 		device_type = "memory";
 	};
 
-	lbc: localbus@ffe05000 {
-		reg = <0 0xffe05000 0 0x1000>;
+	lbc: localbus@fffe05000 {
+		reg = <0xf 0xffe05000 0 0x1000>;
 
 		/* NOR, NAND Flashes and Vitesse 5 port L2 switch */
-		ranges = <0x0 0x0 0x0 0xef000000 0x01000000
-			  0x1 0x0 0x0 0xff800000 0x00040000
-			  0x2 0x0 0x0 0xffb00000 0x00020000>;
+		ranges = <0x0 0x0 0xf 0xef000000 0x01000000
+			  0x1 0x0 0xf 0xff800000 0x00040000
+			  0x2 0x0 0xf 0xffb00000 0x00020000>;
 	};
 
-	soc: soc@ffe00000 {
-		ranges = <0x0 0x0 0xffe00000 0x100000>;
+	soc: soc@fffe00000 {
+		ranges = <0x0 0xf 0xffe00000 0x100000>;
 	};
 
-	pci0: pcie@ffe09000 {
-		ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
-			  0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
-		reg = <0 0xffe09000 0 0x1000>;
+	pci0: pcie@fffe09000 {
+		ranges = <0x2000000 0x0 0xc0000000 0xc 0x20000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
+		reg = <0xf 0xffe09000 0 0x1000>;
 		pcie@0 {
 			ranges = <0x2000000 0x0 0xa0000000
 				  0x2000000 0x0 0xa0000000
···
 		};
 	};
 
-	pci1: pcie@ffe0a000 {
-		reg = <0 0xffe0a000 0 0x1000>;
-		ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
-			  0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
+	pci1: pcie@fffe0a000 {
+		reg = <0xf 0xffe0a000 0 0x1000>;
+		ranges = <0x2000000 0x0 0x80000000 0xc 0x00000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>;
 		pcie@0 {
-			ranges = <0x2000000 0x0 0x80000000
-				  0x2000000 0x0 0x80000000
+			ranges = <0x2000000 0x0 0xc0000000
+				  0x2000000 0x0 0xc0000000
 				  0x0 0x20000000
 
 				  0x1000000 0x0 0x0
···
 		};
 	};
 
-	qe: qe@ffe80000 {
-                ranges = <0x0 0x0 0xffe80000 0x40000>;
-                reg = <0 0xffe80000 0 0x480>;
+	qe: qe@fffe80000 {
+                ranges = <0x0 0xf 0xffe80000 0x40000>;
+                reg = <0xf 0xffe80000 0 0x480>;
                 brg-frequency = <0>;
                 bus-frequency = <0>;
         };
 };
 
-/include/ "p1021rdb.dtsi"
+/include/ "p1021rdb-pc.dtsi"
 /include/ "fsl/p1021si-post.dtsi"

arch/powerpc/boot/dts/p1021rdb.dtsi arch/powerpc/boot/dts/p1024rdb.dtsi

···
 /*
- * P1021 RDB Device Tree Source stub (no addresses or top-level ranges)
+ * P1024 RDB Device Tree Source stub (no addresses or top-level ranges)
  *
- * Copyright 2011 Freescale Semiconductor Inc.
+ * Copyright 2012 Freescale Semiconductor Inc.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
···
 			/* 512KB for u-boot Environment Variables */
 			reg = <0x00f00000 0x00100000>;
 			label = "NOR U-Boot Image";
+			read-only;
 		};
 	};
 
 	nand@1,0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "fsl,p1021-fcm-nand",
-			     "fsl,elbc-fcm-nand";
+		compatible = "fsl,p1020-fcm-nand",
+				 "fsl,elbc-fcm-nand";
 		reg = <0x1 0x0 0x40000>;
 
 		partition@0 {
···
 		};
 
 		partition@a00000 {
-			/* 7MB for JFFS2 based Root file System */
-			reg = <0x00a00000 0x00700000>;
+			/* 15MB for JFFS2 based Root file System */
+			reg = <0x00a00000 0x00f00000>;
 			label = "NAND JFFS2 Root File System";
 		};
 
-		partition@1100000 {
-			/* 15MB for User Writable Area  */
-			reg = <0x01100000 0x00f00000>;
+		partition@1900000 {
+			/* 7MB for User Writable Area */
+			reg = <0x01900000 0x00700000>;
 			label = "NAND Writable User area";
 		};
-	};
-
-	L2switch@2,0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "vitesse-7385";
-		reg = <0x2 0x0 0x20000>;
 	};
 };
 
 &soc {
-	i2c@3000 {
-		rtc@68 {
-			compatible = "pericom,pt7c4338";
-			reg = <0x68>;
-		};
-	};
-
 	spi@7000 {
 		flash@0 {
 			#address-cells = <1>;
 			#size-cells = <1>;
-			compatible = "spansion,s25sl12801";
+			compatible = "spansion,m25p80";
 			reg = <0>;
-			spi-max-frequency = <40000000>; /* input clock */
+			spi-max-frequency = <40000000>;
 
-			partition@u-boot {
+			partition@0 {
 				/* 512KB for u-boot Bootloader Image */
 				reg = <0x0 0x00080000>;
-				label = "SPI Flash U-Boot Image";
+				label = "SPI U-Boot Image";
 				read-only;
 			};
 
-			partition@dtb {
+			partition@80000 {
 				/* 512KB for DTB Image */
 				reg = <0x00080000 0x00080000>;
-				label = "SPI Flash DTB Image";
+				label = "SPI DTB Image";
 			};
 
-			partition@kernel {
+			partition@100000 {
 				/* 4MB for Linux Kernel Image */
 				reg = <0x00100000 0x00400000>;
-				label = "SPI Flash Linux Kernel Image";
+				label = "SPI Linux Kernel Image";
 			};
 
-			partition@fs {
+			partition@500000 {
 				/* 4MB for Compressed RFS Image */
 				reg = <0x00500000 0x00400000>;
-				label = "SPI Flash Compressed RFSImage";
+				label = "SPI Compressed RFS Image";
 			};
 
-			partition@jffs-fs {
+			partition@900000 {
 				/* 7MB for JFFS2 based RFS */
 				reg = <0x00900000 0x00700000>;
-				label = "SPI Flash JFFS2 RFS";
+				label = "SPI JFFS2 RFS";
 			};
+		};
+	};
+
+	i2c@3000 {
+		rtc@68 {
+			compatible = "dallas,ds1339";
+			reg = <0x68>;
 		};
 	};
 
···
 		phy_type = "ulpi";
 	};
 
+	usb@23000 {
+		status = "disabled";
+	};
+
 	mdio@24000 {
 		phy0: ethernet-phy@0 {
-			interrupt-parent = <&mpic>;
 			interrupts = <3 1 0 0>;
 			reg = <0x0>;
 		};
-
 		phy1: ethernet-phy@1 {
-			interrupt-parent = <&mpic>;
 			interrupts = <2 1 0 0>;
 			reg = <0x1>;
 		};
+		phy2: ethernet-phy@2 {
+			interrupts = <1 1 0 0>;
+			reg = <0x2>;
+		};
+	};
 
+	mdio@25000 {
 		tbi0: tbi-phy@11 {
 			reg = <0x11>;
 			device_type = "tbi-phy";
 		};
 	};
 
-	mdio@25000 {
+	mdio@26000 {
 		tbi1: tbi-phy@11 {
 			reg = <0x11>;
 			device_type = "tbi-phy";
 		};
 	};
 
-	mdio@26000 {
-		tbi2: tbi-phy@11 {
-			reg = <0x11>;
-			device_type = "tbi-phy";
-		};
-	};
-
-	enet0: ethernet@b0000 {
-		fixed-link = <1 1 1000 0 0>;
+	ethernet@b0000 {
+		phy-handle = <&phy2>;
 		phy-connection-type = "rgmii-id";
-
 	};
 
-	enet1: ethernet@b1000 {
+	ethernet@b1000 {
 		phy-handle = <&phy0>;
-		tbi-handle = <&tbi1>;
+		tbi-handle = <&tbi0>;
 		phy-connection-type = "sgmii";
 	};
 
-	enet2: ethernet@b2000 {
+	ethernet@b2000 {
 		phy-handle = <&phy1>;
-		tbi-handle = <&tbi2>;
 		phy-connection-type = "rgmii-id";
 	};
 };

arch/powerpc/boot/dts/p1021rdb_36b.dts arch/powerpc/boot/dts/fsl/bsc9131si-pre.dtsi

···
 /*
- * P1021 RDB Device Tree Source (36-bit address map)
+ * BSC9131 Silicon/SoC Device Tree Source (pre include)
  *
- * Copyright 2011 Freescale Semiconductor Inc.
+ * Copyright 2011-2012 Freescale Semiconductor Inc.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
···
  * Foundation, either version 2 of that License or (at your option) any
  * later version.
  *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
  * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
  * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
  * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
···
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-/include/ "fsl/p1021si-pre.dtsi"
+/dts-v1/;
 / {
-	model = "fsl,P1021RDB";
-	compatible = "fsl,P1021RDB-PC";
+	compatible = "fsl,BSC9131";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
 
-	memory {
-		device_type = "memory";
+	aliases {
+		serial0 = &serial0;
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
 	};
 
-	lbc: localbus@fffe05000 {
-		reg = <0xf 0xffe05000 0 0x1000>;
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		/* NOR, NAND Flashes and Vitesse 5 port L2 switch */
-		ranges = <0x0 0x0 0xf 0xef000000 0x01000000
-			  0x1 0x0 0xf 0xff800000 0x00040000
-			  0x2 0x0 0xf 0xffb00000 0x00020000>;
-	};
-
-	soc: soc@fffe00000 {
-		ranges = <0x0 0xf 0xffe00000 0x100000>;
-	};
-
-	pci0: pcie@fffe09000 {
-		ranges = <0x2000000 0x0 0xc0000000 0xc 0x20000000 0x0 0x20000000
-			  0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
-		reg = <0xf 0xffe09000 0 0x1000>;
-		pcie@0 {
-			ranges = <0x2000000 0x0 0xa0000000
-				  0x2000000 0x0 0xa0000000
-				  0x0 0x20000000
-
-				  0x1000000 0x0 0x0
-				  0x1000000 0x0 0x0
-				  0x0 0x100000>;
+		PowerPC,BSC9131@0 {
+			device_type = "cpu";
+			compatible = "fsl,e500v2";
+			reg = <0x0>;
+			next-level-cache = <&L2>;
 		};
 	};
-
-	pci1: pcie@fffe0a000 {
-		reg = <0xf 0xffe0a000 0 0x1000>;
-		ranges = <0x2000000 0x0 0x80000000 0xc 0x00000000 0x0 0x20000000
-			  0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>;
-		pcie@0 {
-			ranges = <0x2000000 0x0 0xc0000000
-				  0x2000000 0x0 0xc0000000
-				  0x0 0x20000000
-
-				  0x1000000 0x0 0x0
-				  0x1000000 0x0 0x0
-				  0x0 0x100000>;
-		};
-	};
-
-	qe: qe@fffe80000 {
-                ranges = <0x0 0xf 0xffe80000 0x40000>;
-                reg = <0xf 0xffe80000 0 0x480>;
-                brg-frequency = <0>;
-                bus-frequency = <0>;
-        };
 };
-
-/include/ "p1021rdb.dtsi"
-/include/ "fsl/p1021si-post.dtsi"

arch/powerpc/boot/dts/p1022ds.dtsi

···
  */
 
 &board_lbc {
-	/*
-	 * This node is used to access the pixis via "indirect" mode,
-	 * which is done by writing the pixis register index to chip
-	 * select 0 and the value to/from chip select 1.  Indirect
-	 * mode is the only way to access the pixis when DIU video
-	 * is enabled.  Note that this assumes that the first column
-	 * of the 'ranges' property above is the chip select number.
-	 */
-	board-control@0,0 {
-		compatible = "fsl,p1022ds-indirect-pixis";
-		reg = <0x0 0x0 1	/* CS0 */
-		       0x1 0x0 1>;	/* CS1 */
-		interrupt-parent = <&mpic>;
-		interrupts = <8 0 0 0>;
-	};
-
 	nor@0,0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
···
 			 * clock-frequency will be set by U-Boot if
 			 * the clock is enabled.
 			 */
+		};
+		rtc@68 {
+			compatible = "dallas,ds1339";
+			reg = <0x68>;
 		};
 	};
 

arch/powerpc/boot/dts/p1024rdb_32b.dts

···
+/*
+ * P1024 RDB 32Bit Physical Address Map Device Tree Source
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "fsl/p1020si-pre.dtsi"
+/ {
+	model = "fsl,P1024RDB";
+	compatible = "fsl,P1024RDB";
+
+	memory {
+		device_type = "memory";
+	};
+
+	lbc: localbus@ffe05000 {
+		reg = <0x0 0xffe05000 0 0x1000>;
+		ranges = <0x0 0x0 0x0 0xef000000 0x01000000
+			  0x1 0x0 0x0 0xff800000 0x00040000>;
+	};
+
+	soc: soc@ffe00000 {
+		ranges = <0x0 0x0 0xffe00000 0x100000>;
+	};
+
+	pci0: pcie@ffe09000 {
+		reg = <0x0 0xffe09000 0 0x1000>;
+		ranges = <0x2000000 0x0 0xe0000000 0x0 0xa0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0x0 0xffc10000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xe0000000
+				  0x2000000 0x0 0xe0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	pci1: pcie@ffe0a000 {
+		reg = <0x0 0xffe0a000 0 0x1000>;
+		ranges = <0x2000000 0x0 0xe0000000 0x0 0x80000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0x0 0xffc00000 0x0 0x10000>;
+		pcie@0 {
+			reg = <0x0 0x0 0x0 0x0 0x0>;
+			ranges = <0x2000000 0x0 0xe0000000
+				  0x2000000 0x0 0xe0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+};
+
+/include/ "p1024rdb.dtsi"
+/include/ "fsl/p1020si-post.dtsi"

arch/powerpc/boot/dts/p1025rdb.dtsi

···
 				0x1  0x4  0x2  0x0  0x2  0x0    /* ENET5_RX_DV_SER5_CTS_B */
 				0x1  0x8  0x2  0x0  0x2  0x0>;    /* ENET5_RX_ER_SER5_CD_B */
 		};
+
+		pio3: ucc_pin@03 {
+			pio-map = <
+		/* port  pin  dir  open_drain  assignment  has_irq */
+				0x0  0x16 0x2  0x0  0x2  0x0    /* SER7_CD_B*/
+				0x0  0x12 0x2  0x0  0x2  0x0    /* SER7_CTS_B*/
+				0x0  0x13 0x1  0x0  0x2  0x0    /* SER7_RTS_B*/
+				0x0  0x14 0x2  0x0  0x2  0x0    /* SER7_RXD0*/
+				0x0  0x15 0x1  0x0  0x2  0x0>;    /* SER7_TXD0*/
+		};
+
+		pio4: ucc_pin@04 {
+			pio-map = <
+		/* port  pin  dir  open_drain  assignment  has_irq */
+				0x1  0x0  0x2  0x0  0x2  0x0    /* SER3_CD_B*/
+				0x0  0x1c 0x2  0x0  0x2  0x0    /* SER3_CTS_B*/
+				0x0  0x1d 0x1  0x0  0x2  0x0    /* SER3_RTS_B*/
+				0x0  0x1e 0x2  0x0  0x2  0x0    /* SER3_RXD0*/
+				0x0  0x1f 0x1  0x0  0x2  0x0>;    /* SER3_TXD0*/
+		};
+	};
+};
+
+&qe {
+	serial2: ucc@2600 {
+		device_type = "serial";
+		compatible = "ucc_uart";
+		port-number = <0>;
+		rx-clock-name = "brg6";
+		tx-clock-name = "brg6";
+		pio-handle = <&pio3>;
+	};
+
+	serial3: ucc@2200 {
+		device_type = "serial";
+		compatible = "ucc_uart";
+		port-number = <1>;
+		rx-clock-name = "brg2";
+		tx-clock-name = "brg2";
+		pio-handle = <&pio4>;
 	};
 };

arch/powerpc/boot/dts/p2020ds.dtsi

···
 			interrupts = <3 1 0 0>;
 			reg = <0x2>;
 		};
+
+		sgmii_phy1: sgmii-phy@1 {
+			interrupts = <5 1 0 0>;
+			reg = <0x1c>;
+		};
+		sgmii_phy2: sgmii-phy@2 {
+			interrupts = <5 1 0 0>;
+			reg = <0x1d>;
+		};
+
 		tbi0: tbi-phy@11 {
 			reg = <0x11>;
 			device_type = "tbi-phy";

arch/powerpc/boot/dts/p2020rdb.dts

···
 
 		/* NOR and NAND Flashes */
 		ranges = <0x0 0x0 0x0 0xef000000 0x01000000
-			  0x1 0x0 0x0 0xff800000 0x00040000
+			  0x1 0x0 0x0 0xffa00000 0x00040000
 			  0x2 0x0 0x0 0xffb00000 0x00020000>;
 
 		nor@0,0 {

arch/powerpc/boot/dts/p2041rdb.dts

···
 
 	lbc: localbus@ffe124000 {
 		reg = <0xf 0xfe124000 0 0x1000>;
-		ranges = <0 0 0xf 0xe8000000 0x08000000>;
+		ranges = <0 0 0xf 0xe8000000 0x08000000
+			  1 0 0xf 0xffa00000 0x00040000>;
 
 		flash@0,0 {
 			compatible = "cfi-flash";
 			reg = <0 0 0x08000000>;
 			bank-width = <2>;
 			device-width = <2>;
+		};
+
+		nand@1,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,elbc-fcm-nand";
+			reg = <0x1 0x0 0x40000>;
+
+			partition@0 {
+				label = "NAND U-Boot Image";
+				reg = <0x0 0x02000000>;
+				read-only;
+			};
+
+			partition@2000000 {
+				label = "NAND Root File System";
+				reg = <0x02000000 0x10000000>;
+			};
+
+			partition@12000000 {
+				label = "NAND Compressed RFS Image";
+				reg = <0x12000000 0x08000000>;
+			};
+
+			partition@1a000000 {
+				label = "NAND Linux Kernel Image";
+				reg = <0x1a000000 0x04000000>;
+			};
+
+			partition@1e000000 {
+				label = "NAND DTB Image";
+				reg = <0x1e000000 0x01000000>;
+			};
+
+			partition@1f000000 {
+				label = "NAND Writable User area";
+				reg = <0x1f000000 0x01000000>;
+			};
 		};
 	};
 

arch/powerpc/boot/dts/p3060qds.dts

···
-/*
- * P3060QDS Device Tree Source
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/include/ "fsl/p3060si-pre.dtsi"
-
-/ {
-	model = "fsl,P3060QDS";
-	compatible = "fsl,P3060QDS";
-	#address-cells = <2>;
-	#size-cells = <2>;
-	interrupt-parent = <&mpic>;
-
-	memory {
-		device_type = "memory";
-	};
-
-	dcsr: dcsr@f00000000 {
-		ranges = <0x00000000 0xf 0x00000000 0x01008000>;
-	};
-
-	soc: soc@ffe000000 {
-		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
-		reg = <0xf 0xfe000000 0 0x00001000>;
-		spi@110000 {
-			flash@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "spansion,s25sl12801";
-				reg = <0>;
-				spi-max-frequency = <40000000>; /* input clock */
-				partition@u-boot {
-					label = "u-boot";
-					reg = <0x00000000 0x00100000>;
-					read-only;
-				};
-				partition@kernel {
-					label = "kernel";
-					reg = <0x00100000 0x00500000>;
-					read-only;
-				};
-				partition@dtb {
-					label = "dtb";
-					reg = <0x00600000 0x00100000>;
-					read-only;
-				};
-				partition@fs {
-					label = "file system";
-					reg = <0x00700000 0x00900000>;
-				};
-			};
-			flash@1 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "spansion,en25q32b";
-				reg = <1>;
-				spi-max-frequency = <40000000>; /* input clock */
-				partition@spi1 {
-					label = "spi1";
-					reg = <0x00000000 0x00400000>;
-				};
-			};
-			flash@2 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "atmel,at45db081d";
-				reg = <2>;
-				spi-max-frequency = <40000000>; /* input clock */
-				partition@spi1 {
-					label = "spi2";
-					reg = <0x00000000 0x00100000>;
-				};
-			};
-			flash@3 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "spansion,sst25wf040";
-				reg = <3>;
-				spi-max-frequency = <40000000>; /* input clock */
-				partition@spi3 {
-					label = "spi3";
-					reg = <0x00000000 0x00080000>;
-				};
-			};
-		};
-
-		i2c@118000 {
-			eeprom@51 {
-				compatible = "at24,24c256";
-				reg = <0x51>;
-			};
-			eeprom@53 {
-				compatible = "at24,24c256";
-				reg = <0x53>;
-			};
-			rtc@68 {
-				compatible = "dallas,ds3232";
-				reg = <0x68>;
-				interrupts = <0x1 0x1 0 0>;
-			};
-		};
-
-		usb0: usb@210000 {
-			phy_type = "ulpi";
-		};
-
-		usb1: usb@211000 {
-			dr_mode = "host";
-			phy_type = "ulpi";
-		};
-	};
-
-	rio: rapidio@ffe0c0000 {
-		reg = <0xf 0xfe0c0000 0 0x11000>;
-
-		port1 {
-			ranges = <0 0 0xc 0x20000000 0 0x10000000>;
-		};
-		port2 {
-			ranges = <0 0 0xc 0x30000000 0 0x10000000>;
-		};
-	};
-
-	lbc: localbus@ffe124000 {
-		reg = <0xf 0xfe124000 0 0x1000>;
-		ranges = <0 0 0xf 0xe8000000 0x08000000
-			  2 0 0xf 0xffa00000 0x00040000
-			  3 0 0xf 0xffdf0000 0x00008000>;
-
-		flash@0,0 {
-			compatible = "cfi-flash";
-			reg = <0 0 0x08000000>;
-			bank-width = <2>;
-			device-width = <2>;
-		};
-
-		nand@2,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,elbc-fcm-nand";
-			reg = <0x2 0x0 0x40000>;
-
-			partition@0 {
-				label = "NAND U-Boot Image";
-				reg = <0x0 0x02000000>;
-				read-only;
-			};
-
-			partition@2000000 {
-				label = "NAND Root File System";
-				reg = <0x02000000 0x10000000>;
-			};
-
-			partition@12000000 {
-				label = "NAND Compressed RFS Image";
-				reg = <0x12000000 0x08000000>;
-			};
-
-			partition@1a000000 {
-				label = "NAND Linux Kernel Image";
-				reg = <0x1a000000 0x04000000>;
-			};
-
-			partition@1e000000 {
-				label = "NAND DTB Image";
-				reg = <0x1e000000 0x01000000>;
-			};
-
-			partition@1f000000 {
-				label = "NAND Writable User area";
-				reg = <0x1f000000 0x21000000>;
-			};
-		};
-
-		board-control@3,0 {
-			compatible = "fsl,p3060qds-fpga", "fsl,fpga-qixis";
-			reg = <3 0 0x100>;
-		};
-	};
-
-	pci0: pcie@ffe200000 {
-		reg = <0xf 0xfe200000 0 0x1000>;
-		ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
-			  0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
-		pcie@0 {
-			ranges = <0x02000000 0 0xe0000000
-				  0x02000000 0 0xe0000000
-				  0 0x20000000
-
-				  0x01000000 0 0x00000000
-				  0x01000000 0 0x00000000
-				  0 0x00010000>;
-		};
-	};
-
-	pci1: pcie@ffe201000 {
-		reg = <0xf 0xfe201000 0 0x1000>;
-		ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
-			  0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
-		pcie@0 {
-			ranges = <0x02000000 0 0xe0000000
-				  0x02000000 0 0xe0000000
-				  0 0x20000000
-
-				  0x01000000 0 0x00000000
-				  0x01000000 0 0x00000000
-				  0 0x00010000>;
-		};
-	};
-};
-
-/include/ "fsl/p3060si-post.dtsi"

arch/powerpc/boot/dts/sbc8560.dts

···
-/*
- * SBC8560 Device Tree Source
- *
- * Copyright 2007 Wind River Systems Inc.
- *
- * Paul Gortmaker (see MAINTAINERS for contact information)
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-/dts-v1/;
-
-/ {
-	model = "SBC8560";
-	compatible = "SBC8560";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	aliases {
-		ethernet0 = &enet0;
-		ethernet1 = &enet1;
-		ethernet2 = &enet2;
-		ethernet3 = &enet3;
-		serial0 = &serial0;
-		serial1 = &serial1;
-		pci0 = &pci0;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,8560@0 {
-			device_type = "cpu";
-			reg = <0>;
-			d-cache-line-size = <0x20>;	// 32 bytes
-			i-cache-line-size = <0x20>;	// 32 bytes
-			d-cache-size = <0x8000>;	// L1, 32K
-			i-cache-size = <0x8000>;	// L1, 32K
-			timebase-frequency = <0>;	// From uboot
-			bus-frequency = <0>;
-			clock-frequency = <0>;
-			next-level-cache = <&L2>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x20000000>;
-	};
-
-	soc@ff700000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		device_type = "soc";
-		ranges = <0x0 0xff700000 0x00100000>;
-		clock-frequency = <0>;
-
-		ecm-law@0 {
-			compatible = "fsl,ecm-law";
-			reg = <0x0 0x1000>;
-			fsl,num-laws = <8>;
-		};
-
-		ecm@1000 {
-			compatible = "fsl,mpc8560-ecm", "fsl,ecm";
-			reg = <0x1000 0x1000>;
-			interrupts = <17 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		memory-controller@2000 {
-			compatible = "fsl,mpc8560-memory-controller";
-			reg = <0x2000 0x1000>;
-			interrupt-parent = <&mpic>;
-			interrupts = <0x12 0x2>;
-		};
-
-		L2: l2-cache-controller@20000 {
-			compatible = "fsl,mpc8560-l2-cache-controller";
-			reg = <0x20000 0x1000>;
-			cache-line-size = <0x20>;	// 32 bytes
-			cache-size = <0x40000>;		// L2, 256K
-			interrupt-parent = <&mpic>;
-			interrupts = <0x10 0x2>;
-		};
-
-		i2c@3000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <0>;
-			compatible = "fsl-i2c";
-			reg = <0x3000 0x100>;
-			interrupts = <0x2b 0x2>;
-			interrupt-parent = <&mpic>;
-			dfsrr;
-		};
-
-		i2c@3100 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <1>;
-			compatible = "fsl-i2c";
-			reg = <0x3100 0x100>;
-			interrupts = <0x2b 0x2>;
-			interrupt-parent = <&mpic>;
-			dfsrr;
-		};
-
-		dma@21300 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,mpc8560-dma", "fsl,eloplus-dma";
-			reg = <0x21300 0x4>;
-			ranges = <0x0 0x21100 0x200>;
-			cell-index = <0>;
-			dma-channel@0 {
-				compatible = "fsl,mpc8560-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x0 0x80>;
-				cell-index = <0>;
-				interrupt-parent = <&mpic>;
-				interrupts = <20 2>;
-			};
-			dma-channel@80 {
-				compatible = "fsl,mpc8560-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x80 0x80>;
-				cell-index = <1>;
-				interrupt-parent = <&mpic>;
-				interrupts = <21 2>;
-			};
-			dma-channel@100 {
-				compatible = "fsl,mpc8560-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x100 0x80>;
-				cell-index = <2>;
-				interrupt-parent = <&mpic>;
-				interrupts = <22 2>;
-			};
-			dma-channel@180 {
-				compatible = "fsl,mpc8560-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x180 0x80>;
-				cell-index = <3>;
-				interrupt-parent = <&mpic>;
-				interrupts = <23 2>;
-			};
-		};
-
-		enet0: ethernet@24000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <0>;
-			device_type = "network";
-			model = "TSEC";
-			compatible = "gianfar";
-			reg = <0x24000 0x1000>;
-			ranges = <0x0 0x24000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>;
-			interrupt-parent = <&mpic>;
-			tbi-handle = <&tbi0>;
-			phy-handle = <&phy0>;
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-mdio";
-				reg = <0x520 0x20>;
-				phy0: ethernet-phy@19 {
-					interrupt-parent = <&mpic>;
-					interrupts = <0x6 0x1>;
-					reg = <0x19>;
-					device_type = "ethernet-phy";
-				};
-				phy1: ethernet-phy@1a {
-					interrupt-parent = <&mpic>;
-					interrupts = <0x7 0x1>;
-					reg = <0x1a>;
-					device_type = "ethernet-phy";
-				};
-				phy2: ethernet-phy@1b {
-					interrupt-parent = <&mpic>;
-					interrupts = <0x8 0x1>;
-					reg = <0x1b>;
-					device_type = "ethernet-phy";
-				};
-				phy3: ethernet-phy@1c {
-					interrupt-parent = <&mpic>;
-					interrupts = <0x8 0x1>;
-					reg = <0x1c>;
-					device_type = "ethernet-phy";
-				};
-				tbi0: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		enet1: ethernet@25000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <1>;
-			device_type = "network";
-			model = "TSEC";
-			compatible = "gianfar";
-			reg = <0x25000 0x1000>;
-			ranges = <0x0 0x25000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <0x23 0x2 0x24 0x2 0x28 0x2>;
-			interrupt-parent = <&mpic>;
-			tbi-handle = <&tbi1>;
-			phy-handle = <&phy1>;
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-tbi";
-				reg = <0x520 0x20>;
-
-				tbi1: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		mpic: pic@40000 {
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <2>;
-			compatible = "chrp,open-pic";
-			reg = <0x40000 0x40000>;
-			device_type = "open-pic";
-		};
-
-		cpm@919c0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,mpc8560-cpm", "fsl,cpm2";
-			reg = <0x919c0 0x30>;
-			ranges;
-
-			muram@80000 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0x0 0x80000 0x10000>;
-
-				data@0 {
-					compatible = "fsl,cpm-muram-data";
-					reg = <0x0 0x4000 0x9000 0x2000>;
-				};
-			};
-
-			brg@919f0 {
-				compatible = "fsl,mpc8560-brg",
-				             "fsl,cpm2-brg",
-				             "fsl,cpm-brg";
-				reg = <0x919f0 0x10 0x915f0 0x10>;
-				clock-frequency = <165000000>;
-			};
-
-			cpmpic: pic@90c00 {
-				interrupt-controller;
-				#address-cells = <0>;
-				#interrupt-cells = <2>;
-				interrupts = <0x2e 0x2>;
-				interrupt-parent = <&mpic>;
-				reg = <0x90c00 0x80>;
-				compatible = "fsl,mpc8560-cpm-pic", "fsl,cpm2-pic";
-			};
-
-			enet2: ethernet@91320 {
-				device_type = "network";
-				compatible = "fsl,mpc8560-fcc-enet",
-				             "fsl,cpm2-fcc-enet";
-				reg = <0x91320 0x20 0x88500 0x100 0x913b0 0x1>;
-				local-mac-address = [ 00 00 00 00 00 00 ];
-				fsl,cpm-command = <0x16200300>;
-				interrupts = <0x21 0x8>;
-				interrupt-parent = <&cpmpic>;
-				phy-handle = <&phy2>;
-			};
-
-			enet3: ethernet@91340 {
-				device_type = "network";
-				compatible = "fsl,mpc8560-fcc-enet",
-				             "fsl,cpm2-fcc-enet";
-				reg = <0x91340 0x20 0x88600 0x100 0x913d0 0x1>;
-				local-mac-address = [ 00 00 00 00 00 00 ];
-				fsl,cpm-command = <0x1a400300>;
-				interrupts = <0x22 0x8>;
-				interrupt-parent = <&cpmpic>;
-				phy-handle = <&phy3>;
-			};
-		};
-
-		global-utilities@e0000 {
-			compatible = "fsl,mpc8560-guts";
-			reg = <0xe0000 0x1000>;
-		};
-	};
-
-	pci0: pci@ff708000 {
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
-		device_type = "pci";
-		reg = <0xff708000 0x1000>;
-		clock-frequency = <66666666>;
-		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-		interrupt-map = <
-
-			/* IDSEL 0x02 */
-			0x1000 0x0 0x0 0x1 &mpic 0x2 0x1
-			0x1000 0x0 0x0 0x2 &mpic 0x3 0x1
-			0x1000 0x0 0x0 0x3 &mpic 0x4 0x1
-			0x1000 0x0 0x0 0x4 &mpic 0x5 0x1>;
-
-		interrupt-parent = <&mpic>;
-		interrupts = <0x18 0x2>;
-		bus-range = <0x0 0x0>;
-		ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x20000000
-			  0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>;
-	};
-
-	localbus@ff705000 {
-		compatible = "fsl,mpc8560-localbus", "simple-bus";
-		#address-cells = <2>;
-		#size-cells = <1>;
-		reg = <0xff705000 0x100>;	// BRx, ORx, etc.
-
-		ranges = <
-			0x0 0x0 0xff800000 0x0800000	// 8MB boot flash
-			0x1 0x0 0xe4000000 0x4000000	// 64MB flash
-			0x3 0x0 0x20000000 0x4000000	// 64MB SDRAM
-			0x4 0x0 0x24000000 0x4000000	// 64MB SDRAM
-			0x5 0x0 0xfc000000 0x0c00000	// EPLD
-			0x6 0x0 0xe0000000 0x4000000	// 64MB flash
-			0x7 0x0 0x80000000 0x0200000	// ATM1,2
-		>;
-
-		epld@5,0 {
-			compatible = "wrs,epld-localbus";
-			#address-cells = <2>;
-			#size-cells = <1>;
-			reg = <0x5 0x0 0xc00000>;
-			ranges = <
-				0x0 0x0 0x5 0x000000 0x1fff	// LED disp.
-				0x1 0x0 0x5 0x100000 0x1fff	// switches
-				0x2 0x0 0x5 0x200000 0x1fff	// ID reg.
-				0x3 0x0 0x5 0x300000 0x1fff	// status reg.
-				0x4 0x0 0x5 0x400000 0x1fff	// reset reg.
-				0x5 0x0 0x5 0x500000 0x1fff	// Wind port
-				0x7 0x0 0x5 0x700000 0x1fff	// UART #1
-				0x8 0x0 0x5 0x800000 0x1fff	// UART #2
-				0x9 0x0 0x5 0x900000 0x1fff	// RTC
-				0xb 0x0 0x5 0xb00000 0x1fff	// EEPROM
-			>;
-
-			bidr@2,0 {
-				compatible = "wrs,sbc8560-bidr";
-				reg = <0x2 0x0 0x10>;
-			};
-
-			bcsr@3,0 {
-				compatible = "wrs,sbc8560-bcsr";
-				reg = <0x3 0x0 0x10>;
-			};
-
-			brstcr@4,0 {
-				compatible = "wrs,sbc8560-brstcr";
-				reg = <0x4 0x0 0x10>;
-			};
-
-			serial0: serial@7,0 {
-				device_type = "serial";
-				compatible = "ns16550";
-				reg = <0x7 0x0 0x100>;
-				clock-frequency = <1843200>;
-				interrupts = <0x9 0x2>;
-				interrupt-parent = <&mpic>;
-			};
-
-			serial1: serial@8,0 {
-				device_type = "serial";
-				compatible = "ns16550";
-				reg = <0x8 0x0 0x100>;
-				clock-frequency = <1843200>;
-				interrupts = <0xa 0x2>;
-				interrupt-parent = <&mpic>;
-			};
-
-			rtc@9,0 {
-				compatible = "m48t59";
-				reg = <0x9 0x0 0x1fff>;
-			};
-		};
-	};
-};

arch/powerpc/configs/83xx/kmeter1_defconfig

···
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
-CONFIG_SPARSE_IRQ=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_EXPERT=y
-# CONFIG_HOTPLUG is not set
 CONFIG_SLAB=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_MSDOS_PARTITION is not set
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
 # CONFIG_PPC_CHRP is not set
···
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_IPV6 is not set
+CONFIG_TIPC=y
 CONFIG_BRIDGE=m
 CONFIG_VLAN_8021Q=y
 CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
···
 CONFIG_PROC_DEVICETREE=y
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=y
-CONFIG_TUN=y
 CONFIG_MII=y
-CONFIG_MARVELL_PHY=y
-CONFIG_NET_ETHERNET=y
+CONFIG_TUN=y
 CONFIG_UCC_GETH=y
-# CONFIG_NETDEV_10000 is not set
-CONFIG_WAN=y
-CONFIG_HDLC=y
+CONFIG_MARVELL_PHY=y
 CONFIG_PPP=y
 CONFIG_PPP_MULTILINK=y
 CONFIG_PPPOE=y
+CONFIG_WAN=y
+CONFIG_HDLC=y
 # CONFIG_INPUT is not set
 # CONFIG_SERIO is not set
 # CONFIG_VT is not set
···
 # CONFIG_DNOTIFY is not set
 CONFIG_TMPFS=y
 CONFIG_JFFS2_FS=y
+CONFIG_UBIFS_FS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_MSDOS_PARTITION is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y

arch/powerpc/configs/85xx/sbc8560_defconfig

···
-CONFIG_PPC_85xx=y
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EXPERT=y
-CONFIG_SLAB=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_SBC8560=y
-CONFIG_BINFMT_MISC=y
-CONFIG_SPARSE_IRQ=y
-# CONFIG_SECCOMP is not set
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_XFRM_USER=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_FW_LOADER is not set
-CONFIG_PROC_DEVICETREE=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=32768
-CONFIG_NETDEVICES=y
-CONFIG_BROADCOM_PHY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-CONFIG_GIANFAR=y
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=2
-CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-# CONFIG_HW_RANDOM is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_M48T59=y
-CONFIG_INOTIFY=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_NFS_FS=y
-CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_MSDOS_PARTITION is not set
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DETECT_HUNG_TASK=y
-CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_PPC_EARLY_DEBUG=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set

arch/powerpc/configs/corenet32_smp_defconfig

···
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_P2041_RDB=y
 CONFIG_P3041_DS=y
-CONFIG_P3060_QDS=y
 CONFIG_P4080_DS=y
 CONFIG_P5020_DS=y
 CONFIG_HIGHMEM=y
···
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 CONFIG_BINFMT_MISC=m
 CONFIG_KEXEC=y
+CONFIG_IRQ_ALL_CPUS=y
 CONFIG_FORCE_MAX_ZONEORDER=13
 CONFIG_FSL_LBC=y
 CONFIG_PCI=y
 CONFIG_PCIEPORTBUS=y
+CONFIG_PCI_MSI=y
 # CONFIG_PCIEASPM is not set
 CONFIG_RAPIDIO=y
 CONFIG_FSL_RIO=y
···
 CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_AMDSTD=y
 CONFIG_MTD_PHYSMAP_OF=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_ECC=y
+CONFIG_MTD_NAND_IDS=y
+CONFIG_MTD_NAND_FSL_IFC=y
+CONFIG_MTD_NAND_FSL_ELBC=y
 CONFIG_MTD_M25P80=y
 CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_LOOP=y
···
 CONFIG_USB_STORAGE=y
 CONFIG_MMC=y
 CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_OF=y
+CONFIG_MMC_SDHCI_OF_ESDHC=y
 CONFIG_EDAC=y
 CONFIG_EDAC_MM_EDAC=y
 CONFIG_EDAC_MPC85XX=y

arch/powerpc/configs/corenet64_smp_defconfig

···
 CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
 CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_SPARSE_IRQ=y
+CONFIG_IRQ_DOMAIN_DEBUG=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
···
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 # CONFIG_BLK_DEV_BSG is not set
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_MAC_PARTITION=y
 CONFIG_P5020_DS=y
 # CONFIG_PPC_OF_BOOT_TRAMPOLINE is not set
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
 CONFIG_BINFMT_MISC=m
+CONFIG_IRQ_ALL_CPUS=y
+CONFIG_PCIEPORTBUS=y
+CONFIG_PCI_MSI=y
 CONFIG_RAPIDIO=y
 CONFIG_FSL_RIO=y
 CONFIG_NET=y
···
 CONFIG_IPV6=y
 CONFIG_IP_SCTP=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_PHYSMAP_OF=y
+CONFIG_MTD_M25P80=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_FSL_ELBC=y
+CONFIG_MTD_NAND_FSL_IFC=y
 CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=131072
-CONFIG_MISC_DEVICES=y
 CONFIG_EEPROM_LEGACY=y
+CONFIG_ATA=y
+CONFIG_SATA_FSL=y
+CONFIG_SATA_SIL24=y
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=y
 CONFIG_INPUT_FF_MEMLESS=m
···
 CONFIG_SERIO_LIBPS2=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_DETECT_IRQ=y
 CONFIG_SERIAL_8250_RSA=y
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_MPC=y
+CONFIG_SPI=y
+CONFIG_SPI_GPIO=y
+CONFIG_SPI_FSL_SPI=y
+CONFIG_SPI_FSL_ESPI=y
 # CONFIG_HWMON is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=y
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
+CONFIG_USB_HID=m
+CONFIG_USB=y
+CONFIG_USB_MON=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_FSL=y
+CONFIG_USB_STORAGE=y
+CONFIG_MMC=y
+CONFIG_MMC_SDHCI=y
+CONFIG_EDAC=y
+CONFIG_EDAC_MM_EDAC=y
 CONFIG_DMADEVICES=y
 CONFIG_FSL_DMA=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=y
+CONFIG_NTFS_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_TMPFS=y
 CONFIG_HUGETLBFS=y
 # CONFIG_MISC_FILESYSTEMS is not set
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_MAC_PARTITION=y
-CONFIG_NLS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+CONFIG_NFSD=m
+CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_UTF8=m
 CONFIG_CRC_T10DIF=y
-CONFIG_CRC_ITU_T=m
 CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_FS=y
+CONFIG_DEBUG_SHIRQ=y
 CONFIG_DETECT_HUNG_TASK=y
 CONFIG_DEBUG_INFO=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_IRQ_DOMAIN_DEBUG=y
+CONFIG_CRYPTO_NULL=y
 CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_MD4=y
 CONFIG_CRYPTO_SHA256=y
 CONFIG_CRYPTO_SHA512=y
 CONFIG_CRYPTO_AES=y

arch/powerpc/configs/mgcoge_defconfig

···
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
-CONFIG_SPARSE_IRQ=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
···
 # CONFIG_PCSPKR_PLATFORM is not set
 CONFIG_EMBEDDED=y
 CONFIG_SLAB=y
+CONFIG_PARTITION_ADVANCED=y
 # CONFIG_IOSCHED_CFQ is not set
 # CONFIG_PPC_PMAC is not set
 CONFIG_PPC_82xx=y
···
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_NETDEVICES=y
-CONFIG_FIXED_PHY=y
-CONFIG_NET_ETHERNET=y
 CONFIG_FS_ENET=y
 CONFIG_FS_ENET_MDIO_FCC=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
+CONFIG_FIXED_PHY=y
 # CONFIG_WLAN is not set
 # CONFIG_INPUT is not set
 # CONFIG_SERIO is not set
···
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_CPM=y
+CONFIG_SPI=y
+CONFIG_SPI_FSL_SPI=y
 # CONFIG_HWMON is not set
 CONFIG_USB_GADGET=y
 CONFIG_USB_FSL_USB2=y
···
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ASCII=y
 CONFIG_NLS_ISO8859_1=y
···
 CONFIG_DEBUG_FS=y
 # CONFIG_SCHED_DEBUG is not set
 CONFIG_DEBUG_INFO=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_BDI_SWITCH=y
 CONFIG_CRYPTO_ECB=y
 CONFIG_CRYPTO_PCBC=y

arch/powerpc/configs/mpc85xx_defconfig

···
 CONFIG_IPV6=y
 CONFIG_IP_SCTP=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_FTL=y
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_UTIL=y
+CONFIG_MTD_PHYSMAP_OF=y
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_OF_PARTS=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_FSL_ELBC=y
+CONFIG_MTD_NAND_FSL_IFC=y
+CONFIG_MTD_NAND_IDS=y
+CONFIG_MTD_NAND_ECC=y
+CONFIG_MTD_M25P80=y
 CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_NBD=y

arch/powerpc/configs/mpc85xx_smp_defconfig

···
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_BINFMT_MISC=m
 CONFIG_MATH_EMULATION=y
+CONFIG_IRQ_ALL_CPUS=y
 CONFIG_FORCE_MAX_ZONEORDER=12
 CONFIG_PCI=y
 CONFIG_PCI_MSI=y
···
 CONFIG_IPV6=y
 CONFIG_IP_SCTP=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_FTL=y
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_UTIL=y
+CONFIG_MTD_PHYSMAP_OF=y
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_OF_PARTS=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_FSL_ELBC=y
+CONFIG_MTD_NAND_FSL_IFC=y
+CONFIG_MTD_NAND_IDS=y
+CONFIG_MTD_NAND_ECC=y
+CONFIG_MTD_M25P80=y
 CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_NBD=y

arch/powerpc/include/asm/immap_qe.h

···
 struct qe_iram {
 	__be32	iadd;		/* I-RAM Address Register */
 	__be32	idata;		/* I-RAM Data Register */
-	u8	res0[0x78];
+	u8	res0[0x04];
+	__be32	iready;		/* I-RAM Ready Register */
+	u8	res1[0x70];
 } __attribute__ ((packed));
 
 /* QE Interrupt Controller */

arch/powerpc/include/asm/qe.h

···
 /* I-RAM */
 #define QE_IRAM_IADD_AIE	0x80000000	/* Auto Increment Enable */
 #define QE_IRAM_IADD_BADDR	0x00080000	/* Base Address */
+#define QE_IRAM_READY           0x80000000      /* Ready */
 
 /* UPC */
 #define UPGCR_PROTOCOL	0x80000000	/* protocol ul2 or pl2 */

arch/powerpc/kernel/head_fsl_booke.S

···
 	/* SPE Unavailable */
 	START_EXCEPTION(SPEUnavailable)
 	NORMAL_EXCEPTION_PROLOG(SPE_UNAVAIL)
-	bne	load_up_spe
-	addi	r3,r1,STACK_FRAME_OVERHEAD
+	beq	1f
+	bl	load_up_spe
+	b	fast_exception_return
+1:	addi	r3,r1,STACK_FRAME_OVERHEAD
 	EXC_XFER_EE_LITE(0x2010, KernelSPE)
 #else
 	EXCEPTION(0x2020, SPE_UNAVAIL, SPEUnavailable, \
···
 /* Note that the SPE support is closely modeled after the AltiVec
  * support.  Changes to one are likely to be applicable to the
  * other!  */
-load_up_spe:
+_GLOBAL(load_up_spe)
 /*
  * Disable SPE for the task which had SPE previously,
  * and save its SPE registers in its thread_struct.
···
 	subi	r4,r5,THREAD
 	stw	r4,last_task_used_spe@l(r3)
 #endif /* !CONFIG_SMP */
-	/* restore registers and return */
-2:	REST_4GPRS(3, r11)
-	lwz	r10,_CCR(r11)
-	REST_GPR(1, r11)
-	mtcr	r10
-	lwz	r10,_LINK(r11)
-	mtlr	r10
-	REST_GPR(10, r11)
-	mtspr	SPRN_SRR1,r9
-	mtspr	SPRN_SRR0,r12
-	REST_GPR(9, r11)
-	REST_GPR(12, r11)
-	lwz	r11,GPR11(r11)
-	rfi
+	blr
 
 /*
  * SPE unavailable trap from kernel - print a message, but let

arch/powerpc/kernel/setup-common.c

···
 arch_initcall(powerpc_debugfs_init);
 #endif
 
+#ifdef CONFIG_BOOKE_WDT
+extern u32 booke_wdt_enabled;
+extern u32 booke_wdt_period;
+
+/* Checks wdt=x and wdt_period=xx command-line option */
+notrace int __init early_parse_wdt(char *p)
+{
+	if (p && strncmp(p, "0", 1) != 0)
+		booke_wdt_enabled = 1;
+
+	return 0;
+}
+early_param("wdt", early_parse_wdt);
+
+int __init early_parse_wdt_period(char *p)
+{
+	unsigned long ret;
+	if (p) {
+		if (!kstrtol(p, 0, &ret))
+			booke_wdt_period = ret;
+	}
+
+	return 0;
+}
+early_param("wdt_period", early_parse_wdt_period);
+#endif	/* CONFIG_BOOKE_WDT */
+
 void ppc_printk_progress(char *s, unsigned short hex)
 {
 	pr_info("%s\n", s);

arch/powerpc/kernel/setup_32.c

···
 		ppc_md.progress("id mach(): done", 0x200);
 }
 
-#ifdef CONFIG_BOOKE_WDT
-extern u32 booke_wdt_enabled;
-extern u32 booke_wdt_period;
-
-/* Checks wdt=x and wdt_period=xx command-line option */
-notrace int __init early_parse_wdt(char *p)
-{
-	if (p && strncmp(p, "0", 1) != 0)
-	       booke_wdt_enabled = 1;
-
-	return 0;
-}
-early_param("wdt", early_parse_wdt);
-
-int __init early_parse_wdt_period (char *p)
-{
-	if (p)
-		booke_wdt_period = simple_strtoul(p, NULL, 0);
-
-	return 0;
-}
-early_param("wdt_period", early_parse_wdt_period);
-#endif	/* CONFIG_BOOKE_WDT */
-
 /* Checks "l2cr=xxxx" command-line option */
 int __init ppc_setup_l2cr(char *str)
 {

arch/powerpc/platforms/82xx/km82xx.c

···
 	{3, 23, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, /* TXP */
 	{3, 24, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, /* TXN */
 	{3, 25, CPM_PIN_INPUT  | CPM_PIN_PRIMARY}, /* RXD */
+
+	/* SPI */
+	{3, 16, CPM_PIN_INPUT | CPM_PIN_SECONDARY},/* SPI_MISO PD16 */
+	{3, 17, CPM_PIN_INPUT | CPM_PIN_SECONDARY},/* SPI_MOSI PD17 */
+	{3, 18, CPM_PIN_INPUT | CPM_PIN_SECONDARY},/* SPI_CLK PD18 */
 };
 
 static void __init init_ioports(void)

arch/powerpc/platforms/83xx/km83xx.c

···
  * Author: Heiko Schocher <[e-mail]>
  *
  * Description:
- * Keymile KMETER1 board specific routines.
+ * Keymile 83xx platform specific routines.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
···
 		for_each_node_by_name(np, "spi")
 			par_io_of_config(np);
 
-		for (np = NULL; (np = of_find_node_by_name(np, "ucc")) != NULL;)
+		for_each_node_by_name(np, "ucc")
 			par_io_of_config(np);
 	}
 
 	np = of_find_compatible_node(NULL, "network", "ucc_geth");
 	if (np != NULL) {
-		uint svid;
+		/*
+		 * handle mpc8360E Erratum QE_ENET10:
+		 * RGMII AC values do not meet the specification
+		 */
+		uint svid = mfspr(SPRN_SVR);
+		struct	device_node *np_par;
+		struct	resource res;
+		void	__iomem *base;
+		int	ret;
 
-		/* handle mpc8360ea rev.2.1 erratum 2: RGMII Timing */
-		svid = mfspr(SPRN_SVR);
-		if (SVR_REV(svid) == 0x0021) {
-			struct	device_node *np_par;
-			struct	resource res;
-			void	__iomem *base;
-			int	ret;
-
-			np_par = of_find_node_by_name(NULL, "par_io");
-			if (np_par == NULL) {
-				printk(KERN_WARNING "%s couldn;t find par_io node\n",
-					__func__);
-				return;
-			}
-			/* Map Parallel I/O ports registers */
-			ret = of_address_to_resource(np_par, 0, &res);
-			if (ret) {
-				printk(KERN_WARNING "%s couldn;t map par_io registers\n",
-					__func__);
-				return;
-			}
-			base = ioremap(res.start, resource_size(&res));
-
-			/*
-			 * IMMR + 0x14A8[4:5] = 11 (clk delay for UCC 2)
-			 * IMMR + 0x14A8[18:19] = 11 (clk delay for UCC 1)
-			 */
-			setbits32((base + 0xa8), 0x0c003000);
-
-			/*
-			 * IMMR + 0x14AC[20:27] = 10101010
-			 * (data delay for both UCC's)
-			 */
-			clrsetbits_be32((base + 0xac), 0xff0, 0xaa0);
-			iounmap(base);
-			of_node_put(np_par);
+		np_par = of_find_node_by_name(NULL, "par_io");
+		if (np_par == NULL) {
+			printk(KERN_WARNING "%s couldn;t find par_io node\n",
+				__func__);
+			return;
 		}
+		/* Map Parallel I/O ports registers */
+		ret = of_address_to_resource(np_par, 0, &res);
+		if (ret) {
+			printk(KERN_WARNING "%s couldn;t map par_io registers\n",
+				__func__);
+			return;
+		}
+
+		base = ioremap(res.start, res.end - res.start + 1);
+
+		/*
+		 * set output delay adjustments to default values according
+		 * table 5 in Errata Rev. 5, 9/2011:
+		 *
+		 * write 0b01 to UCC1 bits 18:19
+		 * write 0b01 to UCC2 option 1 bits 4:5
+		 * write 0b01 to UCC2 option 2 bits 16:17
+		 */
+		clrsetbits_be32((base + 0xa8), 0x0c00f000, 0x04005000);
+
+		/*
+		 * set output delay adjustments to default values according
+		 * table 3-13 in Reference Manual Rev.3 05/2010:
+		 *
+		 * write 0b01 to UCC2 option 2 bits 16:17
+		 * write 0b0101 to UCC1 bits 20:23
+		 * write 0b0101 to UCC2 option 1 bits 24:27
+		 */
+		clrsetbits_be32((base + 0xac), 0x0000cff0, 0x00004550);
+
+		if (SVR_REV(svid) == 0x0021) {
+			/*
+			 * UCC2 option 1: write 0b1010 to bits 24:27
+			 * at address IMMRBAR+0x14AC
+			 */
+			clrsetbits_be32((base + 0xac), 0x000000f0, 0x000000a0);
+		} else if (SVR_REV(svid) == 0x0020) {
+			/*
+			 * UCC1: write 0b11 to bits 18:19
+			 * at address IMMRBAR+0x14A8
+			 */
+			setbits32((base + 0xa8), 0x00003000);
+
+			/*
+			 * UCC2 option 1: write 0b11 to bits 4:5
+			 * at address IMMRBAR+0x14A8
+			 */
+			setbits32((base + 0xa8), 0x0c000000);
+
+			/*
+			 * UCC2 option 2: write 0b11 to bits 16:17
+			 * at address IMMRBAR+0x14AC
+			 */
+			setbits32((base + 0xac), 0x0000c000);
+		}
+		iounmap(base);
+		of_node_put(np_par);
 		of_node_put(np);
 	}
-#endif				/* CONFIG_QUICC_ENGINE */
+#endif	/* CONFIG_QUICC_ENGINE */
 }
 
 machine_device_initcall(mpc83xx_km, mpc83xx_declare_of_platform_devices);

arch/powerpc/platforms/85xx/Kconfig

···
 	  cache-sram-size and cache-sram-offset kernel boot
 	  parameters should be passed when this option is enabled.
 
+config BSC9131_RDB
+	bool "Freescale BSC9131RDB"
+	select DEFAULT_UIMAGE
+	help
+	  This option enables support for the Freescale BSC9131RDB board.
+	  The BSC9131 is a heterogeneous SoC containing an e500v2 powerpc and a
+	  StarCore SC3850 DSP
+	  Manufacturer : Freescale Semiconductor, Inc
+
 config MPC8540_ADS
 	bool "Freescale MPC8540 ADS"
 	select DEFAULT_UIMAGE
···
 	help
 	  This option enables support for the Wind River SBC8548 board
 
-config SBC8560
-	bool "Wind River SBC8560"
-	select DEFAULT_UIMAGE
-	help
-	  This option enables support for the Wind River SBC8560 board
-
 config GE_IMP3A
 	bool "GE Intelligent Platforms IMP3A"
 	select DEFAULT_UIMAGE
···
 	help
 	  This option enables support for the P3041 DS board
 
-config P3060_QDS
-	bool "Freescale P3060 QDS"
-	select DEFAULT_UIMAGE
-	select PPC_E500MC
-	select PHYS_64BIT
-	select SWIOTLB
-	select GPIO_MPC8XXX
-	select HAS_RAPIDIO
-	select PPC_EPAPR_HV_PIC
-	help
-	  This option enables support for the P3060 QDS board
-
 config P4080_DS
 	bool "Freescale P4080 DS"
 	select DEFAULT_UIMAGE
···
 	select PPC_EPAPR_HV_PIC
 	help
 	  This option enables support for the P5020 DS board
+
+config PPC_QEMU_E500
+	bool "QEMU generic e500 platform"
+	depends on EXPERIMENTAL
+	select DEFAULT_UIMAGE
+	help
+	  This option enables support for running as a QEMU guest using
+	  QEMU's generic e500 machine.  This is not required if you're
+	  using a QEMU machine that targets a specific board, such as
+	  mpc8544ds.
+
+	  Unlike most e500 boards that target a specific CPU, this
+	  platform works with any e500-family CPU that QEMU supports.
+	  Thus, you'll need to make sure CONFIG_PPC_E500MC is set or
+	  unset based on the emulated CPU (or actual host CPU in the case
+	  of KVM).
 
 endif # FSL_SOC_BOOKE
 

arch/powerpc/platforms/85xx/Makefile

···
 
 obj-y += common.o
 
+obj-$(CONFIG_BSC9131_RDB) += bsc913x_rdb.o
 obj-$(CONFIG_MPC8540_ADS) += mpc85xx_ads.o
 obj-$(CONFIG_MPC8560_ADS) += mpc85xx_ads.o
 obj-$(CONFIG_MPC85xx_CDS) += mpc85xx_cds.o
···
 obj-$(CONFIG_P1023_RDS)   += p1023_rds.o
 obj-$(CONFIG_P2041_RDB)   += p2041_rdb.o corenet_ds.o
 obj-$(CONFIG_P3041_DS)    += p3041_ds.o corenet_ds.o
-obj-$(CONFIG_P3060_QDS)   += p3060_qds.o corenet_ds.o
 obj-$(CONFIG_P4080_DS)    += p4080_ds.o corenet_ds.o
 obj-$(CONFIG_P5020_DS)    += p5020_ds.o corenet_ds.o
 obj-$(CONFIG_STX_GP3)	  += stx_gp3.o
 obj-$(CONFIG_TQM85xx)	  += tqm85xx.o
-obj-$(CONFIG_SBC8560)     += sbc8560.o
 obj-$(CONFIG_SBC8548)     += sbc8548.o
 obj-$(CONFIG_SOCRATES)    += socrates.o socrates_fpga_pic.o
 obj-$(CONFIG_KSI8560)	  += ksi8560.o
 obj-$(CONFIG_XES_MPC85xx) += xes_mpc85xx.o
 obj-$(CONFIG_GE_IMP3A)	  += ge_imp3a.o
+obj-$(CONFIG_PPC_QEMU_E500) += qemu_e500.o

arch/powerpc/platforms/85xx/bsc913x_rdb.c

···
+/*
+ * BSC913xRDB Board Setup
+ *
+ * Author: Priyanka Jain <[e-mail]>
+ *
+ * Copyright 2011-2012 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/of_platform.h>
+#include <linux/pci.h>
+#include <asm/mpic.h>
+#include <sysdev/fsl_soc.h>
+#include <asm/udbg.h>
+
+#include "mpc85xx.h"
+
+void __init bsc913x_rdb_pic_init(void)
+{
+	struct mpic *mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN |
+	  MPIC_SINGLE_DEST_CPU,
+	  0, 256, " OpenPIC  ");
+
+	if (!mpic)
+		pr_err("bsc913x: Failed to allocate MPIC structure\n");
+	else
+		mpic_init(mpic);
+}
+
+/*
+ * Setup the architecture
+ */
+static void __init bsc913x_rdb_setup_arch(void)
+{
+	if (ppc_md.progress)
+		ppc_md.progress("bsc913x_rdb_setup_arch()", 0);
+
+	pr_info("bsc913x board from Freescale Semiconductor\n");
+}
+
+machine_device_initcall(bsc9131_rdb, mpc85xx_common_publish_devices);
+
+/*
+ * Called very early, device-tree isn't unflattened
+ */
+
+static int __init bsc9131_rdb_probe(void)
+{
+	unsigned long root = of_get_flat_dt_root();
+
+	return of_flat_dt_is_compatible(root, "fsl,bsc9131rdb");
+}
+
+define_machine(bsc9131_rdb) {
+	.name			= "BSC9131 RDB",
+	.probe			= bsc9131_rdb_probe,
+	.setup_arch		= bsc913x_rdb_setup_arch,
+	.init_IRQ		= bsc913x_rdb_pic_init,
+	.get_irq		= mpic_get_irq,
+	.restart		= fsl_rstcr_restart,
+	.calibrate_decr		= generic_calibrate_decr,
+	.progress		= udbg_progress,
+};

arch/powerpc/platforms/85xx/mpc85xx_ds.c

···
 }
 
 #ifdef CONFIG_PCI
-static int primary_phb_addr;
 extern int uli_exclude_device(struct pci_controller *hose,
 				u_char bus, u_char devfn);
+
+static struct device_node *pci_with_uli;
 
 static int mpc85xx_exclude_device(struct pci_controller *hose,
 				   u_char bus, u_char devfn)
 {
-	struct device_node* node;
-	struct resource rsrc;
-
-	node = hose->dn;
-	of_address_to_resource(node, 0, &rsrc);
-
-	if ((rsrc.start & 0xfffff) == primary_phb_addr) {
+	if (hose->dn == pci_with_uli)
 		return uli_exclude_device(hose, bus, devfn);
-	}
 
 	return PCIBIOS_SUCCESSFUL;
 }
 #endif	/* CONFIG_PCI */
+
+static void __init mpc85xx_ds_pci_init(void)
+{
+#ifdef CONFIG_PCI
+	struct device_node *node;
+
+	fsl_pci_init();
+
+	/* See if we have a ULI under the primary */
+
+	node = of_find_node_by_name(NULL, "uli1575");
+	while ((pci_with_uli = of_get_parent(node))) {
+		of_node_put(node);
+		node = pci_with_uli;
+
+		if (pci_with_uli == fsl_pci_primary) {
+			ppc_md.pci_exclude_device = mpc85xx_exclude_device;
+			break;
+		}
+	}
+#endif
+}
 
 /*
  * Setup the architecture
  */
 static void __init mpc85xx_ds_setup_arch(void)
 {
-#ifdef CONFIG_PCI
-	struct device_node *np;
-	struct pci_controller *hose;
-#endif
-	dma_addr_t max = 0xffffffff;
-
 	if (ppc_md.progress)
 		ppc_md.progress("mpc85xx_ds_setup_arch()", 0);
 
-#ifdef CONFIG_PCI
-	for_each_node_by_type(np, "pci") {
-		if (of_device_is_compatible(np, "fsl,mpc8540-pci") ||
-		    of_device_is_compatible(np, "fsl,mpc8548-pcie") ||
-		    of_device_is_compatible(np, "fsl,p2020-pcie")) {
-			struct resource rsrc;
-			of_address_to_resource(np, 0, &rsrc);
-			if ((rsrc.start & 0xfffff) == primary_phb_addr)
-				fsl_add_bridge(np, 1);
-			else
-				fsl_add_bridge(np, 0);
-
-			hose = pci_find_hose_for_OF_device(np);
-			max = min(max, hose->dma_window_base_cur +
-					hose->dma_window_size);
-		}
-	}
-
-	ppc_md.pci_exclude_device = mpc85xx_exclude_device;
-#endif
-
+	mpc85xx_ds_pci_init();
 	mpc85xx_smp_init();
-
-#ifdef CONFIG_SWIOTLB
-	if ((memblock_end_of_DRAM() - 1) > max) {
-		ppc_swiotlb_enable = 1;
-		set_pci_dma_ops(&swiotlb_dma_ops);
-		ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
-	}
-#endif
 
 	printk("MPC85xx DS board from Freescale Semiconductor\n");
 }
···
 {
 	unsigned long root = of_get_flat_dt_root();
 
-	if (of_flat_dt_is_compatible(root, "MPC8544DS")) {
-#ifdef CONFIG_PCI
-		primary_phb_addr = 0xb000;
-#endif
-		return 1;
-	}
-
-	return 0;
+	return !!of_flat_dt_is_compatible(root, "MPC8544DS");
 }
 
 machine_device_initcall(mpc8544_ds, mpc85xx_common_publish_devices);
···
 {
 	unsigned long root = of_get_flat_dt_root();
 
-	if (of_flat_dt_is_compatible(root, "fsl,MPC8572DS")) {
-#ifdef CONFIG_PCI
-		primary_phb_addr = 0x8000;
-#endif
-		return 1;
-	}
-
-	return 0;
+	return !!of_flat_dt_is_compatible(root, "fsl,MPC8572DS");
 }
 
 /*
···
 {
 	unsigned long root = of_get_flat_dt_root();
 
-	if (of_flat_dt_is_compatible(root, "fsl,P2020DS")) {
-#ifdef CONFIG_PCI
-		primary_phb_addr = 0x9000;
-#endif
-		return 1;
-	}
-
-	return 0;
+	return !!of_flat_dt_is_compatible(root, "fsl,P2020DS");
 }
 
 define_machine(mpc8544_ds) {

arch/powerpc/platforms/85xx/mpc85xx_rdb.c

···
 machine_device_initcall(p1020_utm_pc, mpc85xx_common_publish_devices);
 machine_device_initcall(p1021_rdb_pc, mpc85xx_common_publish_devices);
 machine_device_initcall(p1025_rdb, mpc85xx_common_publish_devices);
+machine_device_initcall(p1024_rdb, mpc85xx_common_publish_devices);
 
 /*
  * Called very early, device-tree isn't unflattened
···
 	unsigned long root = of_get_flat_dt_root();
 
 	return of_flat_dt_is_compatible(root, "fsl,P1020UTM-PC");
+}
+
+static int __init p1024_rdb_probe(void)
+{
+	unsigned long root = of_get_flat_dt_root();
+
+	return of_flat_dt_is_compatible(root, "fsl,P1024RDB");
 }
 
 define_machine(p2020_rdb) {
···
 define_machine(p1020_rdb_pc) {
 	.name			= "P1020RDB-PC",
 	.probe			= p1020_rdb_pc_probe,
+	.setup_arch		= mpc85xx_rdb_setup_arch,
+	.init_IRQ		= mpc85xx_rdb_pic_init,
+#ifdef CONFIG_PCI
+	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
+#endif
+	.get_irq		= mpic_get_irq,
+	.restart		= fsl_rstcr_restart,
+	.calibrate_decr		= generic_calibrate_decr,
+	.progress		= udbg_progress,
+};
+
+define_machine(p1024_rdb) {
+	.name			= "P1024 RDB",
+	.probe			= p1024_rdb_probe,
 	.setup_arch		= mpc85xx_rdb_setup_arch,
 	.init_IRQ		= mpc85xx_rdb_pic_init,
 #ifdef CONFIG_PCI

arch/powerpc/platforms/85xx/p1022_ds.c

···
 #include <sysdev/fsl_pci.h>
 #include <asm/udbg.h>
 #include <asm/fsl_guts.h>
+#include <asm/fsl_lbc.h>
 #include "smp.h"
 
 #include "mpc85xx.h"
···
 {
 }
 
+struct fsl_law {
+	u32	lawbar;
+	u32	reserved1;
+	u32	lawar;
+	u32	reserved[5];
+};
+
+#define LAWBAR_MASK	0x00F00000
+#define LAWBAR_SHIFT	12
+
+#define LAWAR_EN	0x80000000
+#define LAWAR_TGT_MASK	0x01F00000
+#define LAW_TRGT_IF_LBC	(0x04 << 20)
+
+#define LAWAR_MASK	(LAWAR_EN | LAWAR_TGT_MASK)
+#define LAWAR_MATCH	(LAWAR_EN | LAW_TRGT_IF_LBC)
+
+#define BR_BA		0xFFFF8000
+
+/*
+ * Map a BRx value to a physical address
+ *
+ * The localbus BRx registers only store the lower 32 bits of the address.  To
+ * obtain the upper four bits, we need to scan the LAW table.  The entry which
+ * maps to the localbus will contain the upper four bits.
+ */
+static phys_addr_t lbc_br_to_phys(const void *ecm, unsigned int count, u32 br)
+{
+#ifndef CONFIG_PHYS_64BIT
+	/*
+	 * If we only have 32-bit addressing, then the BRx address *is* the
+	 * physical address.
+	 */
+	return br & BR_BA;
+#else
+	const struct fsl_law *law = ecm + 0xc08;
+	unsigned int i;
+
+	for (i = 0; i < count; i++) {
+		u64 lawbar = in_be32(&law[i].lawbar);
+		u32 lawar = in_be32(&law[i].lawar);
+
+		if ((lawar & LAWAR_MASK) == LAWAR_MATCH)
+			/* Extract the upper four bits */
+			return (br & BR_BA) | ((lawbar & LAWBAR_MASK) << 12);
+	}
+
+	return 0;
+#endif
+}
+
 /**
  * p1022ds_set_monitor_port: switch the output to a different monitor port
- *
  */
 static void p1022ds_set_monitor_port(enum fsl_diu_monitor_port port)
 {
 	struct device_node *guts_node;
-	struct device_node *indirect_node = NULL;
+	struct device_node *lbc_node = NULL;
+	struct device_node *law_node = NULL;
 	struct ccsr_guts __iomem *guts;
+	struct fsl_lbc_regs *lbc = NULL;
+	void *ecm = NULL;
 	u8 __iomem *lbc_lcs0_ba = NULL;
 	u8 __iomem *lbc_lcs1_ba = NULL;
+	phys_addr_t cs0_addr, cs1_addr;
+	const __be32 *iprop;
+	unsigned int num_laws;
 	u8 b;
 
 	/* Map the global utilities registers. */
···
 		goto exit;
 	}
 
-	indirect_node = of_find_compatible_node(NULL, NULL,
-					     "fsl,p1022ds-indirect-pixis");
-	if (!indirect_node) {
-		pr_err("p1022ds: missing pixis indirect mode node\n");
+	lbc_node = of_find_compatible_node(NULL, NULL, "fsl,p1022-elbc");
+	if (!lbc_node) {
+		pr_err("p1022ds: missing localbus node\n");
 		goto exit;
 	}
 
-	lbc_lcs0_ba = of_iomap(indirect_node, 0);
-	if (!lbc_lcs0_ba) {
-		pr_err("p1022ds: could not map localbus chip select 0\n");
+	lbc = of_iomap(lbc_node, 0);
+	if (!lbc) {
+		pr_err("p1022ds: could not map localbus node\n");
 		goto exit;
 	}
 
-	lbc_lcs1_ba = of_iomap(indirect_node, 1);
-	if (!lbc_lcs1_ba) {
-		pr_err("p1022ds: could not map localbus chip select 1\n");
+	law_node = of_find_compatible_node(NULL, NULL, "fsl,ecm-law");
+	if (!law_node) {
+		pr_err("p1022ds: missing local access window node\n");
 		goto exit;
 	}
+
+	ecm = of_iomap(law_node, 0);
+	if (!ecm) {
+		pr_err("p1022ds: could not map local access window node\n");
+		goto exit;
+	}
+
+	iprop = of_get_property(law_node, "fsl,num-laws", 0);
+	if (!iprop) {
+		pr_err("p1022ds: LAW node is missing fsl,num-laws property\n");
+		goto exit;
+	}
+	num_laws = be32_to_cpup(iprop);
+
+	cs0_addr = lbc_br_to_phys(ecm, num_laws, in_be32(&lbc->bank[0].br));
+	cs1_addr = lbc_br_to_phys(ecm, num_laws, in_be32(&lbc->bank[1].br));
+
+	lbc_lcs0_ba = ioremap(cs0_addr, 1);
+	lbc_lcs1_ba = ioremap(cs1_addr, 1);
 
 	/* Make sure we're in indirect mode first. */
 	if ((in_be32(&guts->pmuxcr) & PMUXCR_ELBCDIU_MASK) !=
···
 		iounmap(lbc_lcs1_ba);
 	if (lbc_lcs0_ba)
 		iounmap(lbc_lcs0_ba);
+	if (lbc)
+		iounmap(lbc);
+	if (ecm)
+		iounmap(ecm);
 	if (guts)
 		iounmap(guts);
 
-	of_node_put(indirect_node);
+	of_node_put(law_node);
+	of_node_put(lbc_node);
 	of_node_put(guts_node);
 }
 

arch/powerpc/platforms/85xx/p3060_qds.c

···
-/*
- * P3060 QDS Setup
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/phy.h>
-#include <asm/machdep.h>
-#include <asm/udbg.h>
-#include <asm/mpic.h>
-#include <linux/of_platform.h>
-#include <sysdev/fsl_soc.h>
-#include <sysdev/fsl_pci.h>
-#include <asm/ehv_pic.h>
-#include "corenet_ds.h"
-
-/*
- * Called very early, device-tree isn't unflattened
- */
-static int __init p3060_qds_probe(void)
-{
-	unsigned long root = of_get_flat_dt_root();
-#ifdef CONFIG_SMP
-	extern struct smp_ops_t smp_85xx_ops;
-#endif
-
-	if (of_flat_dt_is_compatible(root, "fsl,P3060QDS"))
-		return 1;
-
-	/* Check if we're running under the Freescale hypervisor */
-	if (of_flat_dt_is_compatible(root, "fsl,P3060QDS-hv")) {
-		ppc_md.init_IRQ = ehv_pic_init;
-		ppc_md.get_irq = ehv_pic_get_irq;
-		ppc_md.restart = fsl_hv_restart;
-		ppc_md.power_off = fsl_hv_halt;
-		ppc_md.halt = fsl_hv_halt;
-#ifdef CONFIG_SMP
-		/*
-		 * Disable the timebase sync operations because we can't write
-		 * to the timebase registers under the hypervisor.
-		 */
-		smp_85xx_ops.give_timebase = NULL;
-		smp_85xx_ops.take_timebase = NULL;
-#endif
-		return 1;
-	}
-
-	return 0;
-}
-
-define_machine(p3060_qds) {
-	.name			= "P3060 QDS",
-	.probe			= p3060_qds_probe,
-	.setup_arch		= corenet_ds_setup_arch,
-	.init_IRQ		= corenet_ds_pic_init,
-#ifdef CONFIG_PCI
-	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
-#endif
-	.get_irq		= mpic_get_coreint_irq,
-	.restart		= fsl_rstcr_restart,
-	.calibrate_decr		= generic_calibrate_decr,
-	.progress		= udbg_progress,
-	.power_save		= e500_idle,
-};
-
-machine_device_initcall(p3060_qds, corenet_ds_publish_devices);
-
-#ifdef CONFIG_SWIOTLB
-machine_arch_initcall(p3060_qds, swiotlb_setup_bus_notifier);
-#endif

arch/powerpc/platforms/85xx/qemu_e500.c

···
+/*
+ * Paravirt target for a generic QEMU e500 machine
+ *
+ * This is intended to be a flexible device-tree-driven platform, not fixed
+ * to a particular piece of hardware or a particular spec of virtual hardware,
+ * beyond the assumption of an e500-family CPU.  Some things are still hardcoded
+ * here, such as MPIC, but this is a limitation of the current code rather than
+ * an interface contract with QEMU.
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/of_fdt.h>
+#include <asm/machdep.h>
+#include <asm/time.h>
+#include <asm/udbg.h>
+#include <asm/mpic.h>
+#include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pci.h>
+#include "smp.h"
+#include "mpc85xx.h"
+
+void __init qemu_e500_pic_init(void)
+{
+	struct mpic *mpic;
+
+	mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN | MPIC_SINGLE_DEST_CPU,
+			0, 256, " OpenPIC  ");
+
+	BUG_ON(mpic == NULL);
+	mpic_init(mpic);
+}
+
+static void __init qemu_e500_setup_arch(void)
+{
+	ppc_md.progress("qemu_e500_setup_arch()", 0);
+
+	fsl_pci_init();
+	mpc85xx_smp_init();
+}
+
+/*
+ * Called very early, device-tree isn't unflattened
+ */
+static int __init qemu_e500_probe(void)
+{
+	unsigned long root = of_get_flat_dt_root();
+
+	return !!of_flat_dt_is_compatible(root, "fsl,qemu-e500");
+}
+
+machine_device_initcall(qemu_e500, mpc85xx_common_publish_devices);
+
+define_machine(qemu_e500) {
+	.name			= "QEMU e500",
+	.probe			= qemu_e500_probe,
+	.setup_arch		= qemu_e500_setup_arch,
+	.init_IRQ		= qemu_e500_pic_init,
+#ifdef CONFIG_PCI
+	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
+#endif
+	.get_irq		= mpic_get_irq,
+	.restart		= fsl_rstcr_restart,
+	.calibrate_decr		= generic_calibrate_decr,
+	.progress		= udbg_progress,
+};

arch/powerpc/platforms/85xx/sbc8560.c

···
-/*
- * Wind River SBC8560 setup and early boot code.
- *
- * Copyright 2007 Wind River Systems Inc.
- *
- * By Paul Gortmaker (see MAINTAINERS for contact information)
- *
- * Based largely on the MPC8560ADS support - Copyright 2005 Freescale Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/stddef.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/kdev_t.h>
-#include <linux/delay.h>
-#include <linux/seq_file.h>
-#include <linux/of_platform.h>
-
-#include <asm/time.h>
-#include <asm/machdep.h>
-#include <asm/pci-bridge.h>
-#include <asm/mpic.h>
-#include <mm/mmu_decl.h>
-#include <asm/udbg.h>
-
-#include <sysdev/fsl_soc.h>
-#include <sysdev/fsl_pci.h>
-
-#include "mpc85xx.h"
-
-#ifdef CONFIG_CPM2
-#include <asm/cpm2.h>
-#include <sysdev/cpm2_pic.h>
-#endif
-
-static void __init sbc8560_pic_init(void)
-{
-	struct mpic *mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN,
-			0, 256, " OpenPIC  ");
-	BUG_ON(mpic == NULL);
-	mpic_init(mpic);
-
-	mpc85xx_cpm2_pic_init();
-}
-
-/*
- * Setup the architecture
- */
-#ifdef CONFIG_CPM2
-struct cpm_pin {
-	int port, pin, flags;
-};
-
-static const struct cpm_pin sbc8560_pins[] = {
-	/* SCC1 */
-	{3, 29, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
-	{3, 30, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
-	{3, 31, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
-
-	/* SCC2 */
-	{3, 26, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
-	{3, 27, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
-	{3, 28, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
-
-	/* FCC2 */
-	{1, 18, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
-	{1, 19, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
-	{1, 20, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
-	{1, 21, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
-	{1, 22, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
-	{1, 23, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
-	{1, 24, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
-	{1, 25, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
-	{1, 26, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
-	{1, 27, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
-	{1, 28, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
-	{1, 29, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
-	{1, 30, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
-	{1, 31, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
-	{2, 18, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, /* CLK14 */
-	{2, 19, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, /* CLK13 */
-
-	/* FCC3 */
-	{1, 4, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
-	{1, 5, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
-	{1, 6, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
-	{1, 7, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
-	{1, 8, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
-	{1, 9, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
-	{1, 10, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
-	{1, 11, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
-	{1, 12, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
-	{1, 13, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
-	{1, 14, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
-	{1, 15, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
-	{1, 16, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
-	{1, 17, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
-	{2, 16, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* CLK16 */
-	{2, 17, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* CLK15 */
-};
-
-static void __init init_ioports(void)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(sbc8560_pins); i++) {
-		const struct cpm_pin *pin = &sbc8560_pins[i];
-		cpm2_set_pin(pin->port, pin->pin, pin->flags);
-	}
-
-	cpm2_clk_setup(CPM_CLK_SCC1, CPM_BRG1, CPM_CLK_RX);
-	cpm2_clk_setup(CPM_CLK_SCC1, CPM_BRG1, CPM_CLK_TX);
-	cpm2_clk_setup(CPM_CLK_SCC2, CPM_BRG2, CPM_CLK_RX);
-	cpm2_clk_setup(CPM_CLK_SCC2, CPM_BRG2, CPM_CLK_TX);
-	cpm2_clk_setup(CPM_CLK_FCC2, CPM_CLK13, CPM_CLK_RX);
-	cpm2_clk_setup(CPM_CLK_FCC2, CPM_CLK14, CPM_CLK_TX);
-	cpm2_clk_setup(CPM_CLK_FCC3, CPM_CLK15, CPM_CLK_RX);
-	cpm2_clk_setup(CPM_CLK_FCC3, CPM_CLK16, CPM_CLK_TX);
-}
-#endif
-
-static void __init sbc8560_setup_arch(void)
-{
-#ifdef CONFIG_PCI
-	struct device_node *np;
-#endif
-
-	if (ppc_md.progress)
-		ppc_md.progress("sbc8560_setup_arch()", 0);
-
-#ifdef CONFIG_CPM2
-	cpm2_reset();
-	init_ioports();
-#endif
-
-#ifdef CONFIG_PCI
-	for_each_compatible_node(np, "pci", "fsl,mpc8540-pci")
-		fsl_add_bridge(np, 1);
-#endif
-}
-
-static void sbc8560_show_cpuinfo(struct seq_file *m)
-{
-	uint pvid, svid, phid1;
-
-	pvid = mfspr(SPRN_PVR);
-	svid = mfspr(SPRN_SVR);
-
-	seq_printf(m, "Vendor\t\t: Wind River\n");
-	seq_printf(m, "PVR\t\t: 0x%x\n", pvid);
-	seq_printf(m, "SVR\t\t: 0x%x\n", svid);
-
-	/* Display cpu Pll setting */
-	phid1 = mfspr(SPRN_HID1);
-	seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f));
-}
-
-machine_device_initcall(sbc8560, mpc85xx_common_publish_devices);
-
-/*
- * Called very early, device-tree isn't unflattened
- */
-static int __init sbc8560_probe(void)
-{
-        unsigned long root = of_get_flat_dt_root();
-
-        return of_flat_dt_is_compatible(root, "SBC8560");
-}
-
-#ifdef CONFIG_RTC_DRV_M48T59
-static int __init sbc8560_rtc_init(void)
-{
-	struct device_node *np;
-	struct resource res;
-	struct platform_device *rtc_dev;
-
-	np = of_find_compatible_node(NULL, NULL, "m48t59");
-	if (np == NULL) {
-		printk("No RTC in DTB. Has it been eaten by wild dogs?\n");
-		return -ENODEV;
-	}
-
-	of_address_to_resource(np, 0, &res);
-	of_node_put(np);
-
-	printk("Found RTC (m48t59) at i/o 0x%x\n", res.start);
-
-	rtc_dev = platform_device_register_simple("rtc-m48t59", 0, &res, 1);
-
-	if (IS_ERR(rtc_dev)) {
-		printk("Registering sbc8560 RTC device failed\n");
-		return PTR_ERR(rtc_dev);
-	}
-
-	return 0;
-}
-
-arch_initcall(sbc8560_rtc_init);
-
-#endif	/* M48T59 */
-
-static __u8 __iomem *brstcr;
-
-static int __init sbc8560_bdrstcr_init(void)
-{
-	struct device_node *np;
-	struct resource res;
-
-	np = of_find_compatible_node(NULL, NULL, "wrs,sbc8560-brstcr");
-	if (np == NULL) {
-		printk(KERN_WARNING "sbc8560: No board specific RSTCR in DTB.\n");
-		return -ENODEV;
-	}
-
-	of_address_to_resource(np, 0, &res);
-
-	printk(KERN_INFO "sbc8560: Found BRSTCR at %pR\n", &res);
-
-	brstcr = ioremap(res.start, resource_size(&res));
-	if(!brstcr)
-		printk(KERN_WARNING "sbc8560: ioremap of brstcr failed.\n");
-
-	of_node_put(np);
-
-	return 0;
-}
-
-arch_initcall(sbc8560_bdrstcr_init);
-
-void sbc8560_rstcr_restart(char * cmd)
-{
-	local_irq_disable();
-	if(brstcr)
-		clrbits8(brstcr, 0x80);
-
-	while(1);
-}
-
-define_machine(sbc8560) {
-	.name			= "SBC8560",
-	.probe			= sbc8560_probe,
-	.setup_arch		= sbc8560_setup_arch,
-	.init_IRQ		= sbc8560_pic_init,
-	.show_cpuinfo		= sbc8560_show_cpuinfo,
-	.get_irq		= mpic_get_irq,
-	.restart		= sbc8560_rstcr_restart,
-	.calibrate_decr		= generic_calibrate_decr,
-	.progress		= udbg_progress,
-};

arch/powerpc/platforms/Kconfig.cputype

···
 	bool "e500mc Support"
 	select PPC_FPU
 	depends on E500
+	help
+	  This must be enabled for running on e500mc (and derivatives
+	  such as e5500/e6500), and must be disabled for running on
+	  e500v1 or e500v2.
 
 config PPC_FPU
 	bool

arch/powerpc/sysdev/fsl_pci.c

···
 /*
  * MPC83xx/85xx/86xx PCI/PCIE support routing.
  *
- * Copyright 2007-2011 Freescale Semiconductor, Inc.
+ * Copyright 2007-2012 Freescale Semiconductor, Inc.
  * Copyright 2008-2009 MontaVista Software, Inc.
  *
  * Initial author: Xianghua Xiao <[e-mail]>
···
 
 static int fsl_pcie_bus_fixup, is_mpc83xx_pci;
 
-static void __init quirk_fsl_pcie_header(struct pci_dev *dev)
+static void __devinit quirk_fsl_pcie_header(struct pci_dev *dev)
 {
 	u8 progif;
 
···
 
 	return 0;
 }
+
+#if defined(CONFIG_FSL_SOC_BOOKE) || defined(CONFIG_PPC_86xx)
+static const struct of_device_id pci_ids[] = {
+	{ .compatible = "fsl,mpc8540-pci", },
+	{ .compatible = "fsl,mpc8548-pcie", },
+	{ .compatible = "fsl,mpc8610-pci", },
+	{ .compatible = "fsl,mpc8641-pcie", },
+	{ .compatible = "fsl,p1022-pcie", },
+	{ .compatible = "fsl,p1010-pcie", },
+	{ .compatible = "fsl,p1023-pcie", },
+	{ .compatible = "fsl,p4080-pcie", },
+	{ .compatible = "fsl,qoriq-pcie-v2.3", },
+	{ .compatible = "fsl,qoriq-pcie-v2.2", },
+	{},
+};
+
+struct device_node *fsl_pci_primary;
+
+void __devinit fsl_pci_init(void)
+{
+	struct device_node *node;
+	struct pci_controller *hose;
+	dma_addr_t max = 0xffffffff;
+
+	/* Callers can specify the primary bus using other means. */
+	if (!fsl_pci_primary) {
+		/* If a PCI host bridge contains an ISA node, it's primary. */
+		node = of_find_node_by_type(NULL, "isa");
+		while ((fsl_pci_primary = of_get_parent(node))) {
+			of_node_put(node);
+			node = fsl_pci_primary;
+
+			if (of_match_node(pci_ids, node))
+				break;
+		}
+	}
+
+	node = NULL;
+	for_each_node_by_type(node, "pci") {
+		if (of_match_node(pci_ids, node)) {
+			/*
+			 * If there's no PCI host bridge with ISA, arbitrarily
+			 * designate one as primary.  This can go away once
+			 * various bugs with primary-less systems are fixed.
+			 */
+			if (!fsl_pci_primary)
+				fsl_pci_primary = node;
+
+			fsl_add_bridge(node, fsl_pci_primary == node);
+			hose = pci_find_hose_for_OF_device(node);
+			max = min(max, hose->dma_window_base_cur +
+					hose->dma_window_size);
+		}
+	}
+
+#ifdef CONFIG_SWIOTLB
+	/*
+	 * if we couldn't map all of DRAM via the dma windows
+	 * we need SWIOTLB to handle buffers located outside of
+	 * dma capable memory region
+	 */
+	if (memblock_end_of_DRAM() - 1 > max) {
+		ppc_swiotlb_enable = 1;
+		set_pci_dma_ops(&swiotlb_dma_ops);
+		ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
+	}
+#endif
+}
+#endif

arch/powerpc/sysdev/fsl_pci.h

···
 extern int mpc83xx_add_bridge(struct device_node *dev);
 u64 fsl_pci_immrbar_base(struct pci_controller *hose);
 
+extern struct device_node *fsl_pci_primary;
+
+#ifdef CONFIG_FSL_PCI
+void fsl_pci_init(void);
+#else
+static inline void fsl_pci_init(void) {}
+#endif
+
 #endif /* __POWERPC_FSL_PCI_H */
 #endif /* __KERNEL__ */

arch/powerpc/sysdev/mpic.c

···
 	if (of_get_property(node, "single-cpu-affinity", NULL))
 		flags |= MPIC_SINGLE_DEST_CPU;
 	if (of_device_is_compatible(node, "fsl,mpic"))
-		flags |= MPIC_FSL;
+		flags |= MPIC_FSL | MPIC_LARGE_VECTORS;
 
 	mpic = kzalloc(sizeof(struct mpic), GFP_KERNEL);
 	if (mpic == NULL)

arch/powerpc/sysdev/qe_lib/qe.c

···
 
 	for (i = 0; i < be32_to_cpu(ucode->count); i++)
 		out_be32(&qe_immr->iram.idata, be32_to_cpu(code[i]));
+	
+	/* Set I-RAM Ready Register */
+	out_be32(&qe_immr->iram.iready, be32_to_cpu(QE_IRAM_READY));
 }
 
 /*

drivers/watchdog/Kconfig

···
 config BOOKE_WDT_DEFAULT_TIMEOUT
 	int "PowerPC Book-E Watchdog Timer Default Timeout"
 	depends on BOOKE_WDT
-	default 38 if FSL_BOOKE
-	range 0 63 if FSL_BOOKE
-	default 3 if !FSL_BOOKE
-	range 0 3 if !FSL_BOOKE
+	default 38 if PPC_FSL_BOOK3E
+	range 0 63 if PPC_FSL_BOOK3E
+	default 3 if !PPC_FSL_BOOK3E
+	range 0 3 if !PPC_FSL_BOOK3E
 	help
 	  Select the default watchdog timer period to be used by the PowerPC
 	  Book-E watchdog driver.  A watchdog "event" occurs when the bit

drivers/watchdog/booke_wdt.c

···
 u32 booke_wdt_enabled;
 u32 booke_wdt_period = CONFIG_BOOKE_WDT_DEFAULT_TIMEOUT;
 
-#ifdef	CONFIG_FSL_BOOKE
+#ifdef	CONFIG_PPC_FSL_BOOK3E
 #define WDTP(x)		((((x)&0x3)<<30)|(((x)&0x3c)<<15))
 #define WDTP_MASK	(WDTP(0x3f))
 #else
···
 	case WDIOC_SETTIMEOUT:
 		if (get_user(tmp, p))
 			return -EFAULT;
-#ifdef	CONFIG_FSL_BOOKE
+#ifdef	CONFIG_PPC_FSL_BOOK3E
 		/* period of 1 gives the largest possible timeout */
 		if (tmp > period_to_sec(1))
 			return -EINVAL;