scripts/spelling.txt: add regsiter -> register spelling mistake

This typo is quite common. Fix it and add it to the spelling file so
that checkpatch catches it earlier.

Link: http://lkml.kernel.org/r/[e-mail]
Signed-off-by: Stephen Boyd <[e-mail]>
Signed-off-by: Andrew Morton <[e-mail]>
Signed-off-by: Linus Torvalds <[e-mail]>

arch/arc/kernel/unwind.c

···
 				    * state->dataAlign;
 				break;
 			case DW_CFA_def_cfa_register:
-				unw_debug("cfa_def_cfa_regsiter: ");
+				unw_debug("cfa_def_cfa_register: ");
 				state->cfa.reg = get_uleb128(&ptr.p8, end);
 				break;
 				/*todo case DW_CFA_def_cfa_expression: */

arch/arm/kernel/kgdb.c

···
 
 /*
  * Register our undef instruction hooks with ARM undef core.
- * We regsiter a hook specifically looking for the KGB break inst
+ * We register a hook specifically looking for the KGB break inst
  * and we handle the normal undef case within the do_undefinstr
  * handler.
  */

arch/arm/mach-ixp4xx/common-pci.c

···
 int (*ixp4xx_pci_read)(u32 addr, u32 cmd, u32* data);
 
 /*
- * Base address for PCI regsiter region
+ * Base address for PCI register region
  */
 unsigned long ixp4xx_pci_reg_base = 0;
 
 /*
  * PCI cfg an I/O routines are done by programming a 
  * command/byte enable register, and then read/writing
- * the data from a data regsiter. We need to ensure
+ * the data from a data register. We need to ensure
  * these transactions are atomic or we will end up
  * with corrupt data on the bus or in a driver.
  */

arch/m68k/ifpsp060/src/ilsp.S

···
 # ALGORITHM ***********************************************************	#
 #	In the interest of simplicity, all operands are converted to	#
 # longword size whether the operation is byte, word, or long. The	#
-# bounds are sign extended accordingly. If Rn is a data regsiter, Rn is #
+# bounds are sign extended accordingly. If Rn is a data register, Rn is #
 # also sign extended. If Rn is an address register, it need not be sign #
 # extended since the full register is always used.			#
 #	The condition codes are set correctly before the final "rts".	#

arch/m68k/ifpsp060/src/isp.S

···
 # word, or longword sized operands. Then, in the interest of		#
 # simplicity, all operands are converted to longword size whether the	#
 # operation is byte, word, or long. The bounds are sign extended	#
-# accordingly. If Rn is a data regsiter, Rn is also sign extended. If	#
+# accordingly. If Rn is a data register, Rn is also sign extended. If	#
 # Rn is an address register, it need not be sign extended since the	#
 # full register is always used.						#
 #	The comparisons are made and the condition codes calculated.	#

arch/mips/cavium-octeon/executive/cvmx-helper-rgmii.c

···
 }
 
 /**
- * Configure all of the ASX, GMX, and PKO regsiters required
+ * Configure all of the ASX, GMX, and PKO registers required
  * to get RGMII to function on the supplied interface.
  *
  * @interface: PKO Interface to configure (0 or 1)

arch/mips/include/asm/octeon/cvmx-helper-rgmii.h

···
 extern void cvmx_helper_rgmii_internal_loopback(int port);
 
 /**
- * Configure all of the ASX, GMX, and PKO regsiters required
+ * Configure all of the ASX, GMX, and PKO registers required
  * to get RGMII to function on the supplied interface.
  *
  * @interface: PKO Interface to configure (0 or 1)

arch/parisc/kernel/entry.S

···
 
 	/* 
 		When there is no translation for the probe address then we
-		must nullify the insn and return zero in the target regsiter.
+		must nullify the insn and return zero in the target register.
 		This will indicate to the calling code that it does not have 
 		write/read privileges to this address.
 

arch/powerpc/mm/icswx.c

···
 }
 
 /**
- * @regs: regsiters at time of interrupt
+ * @regs: registers at time of interrupt
  * @address: storage address
  * @error_code: Fault code, usually the DSISR or ESR depending on
  *		processor type

drivers/acpi/cppc_acpi.c

···
 /* pcc mapped address + header size + offset within PCC subspace */
 #define GET_PCC_VADDR(offs) (pcc_data.pcc_comm_addr + 0x8 + (offs))
 
-/* Check if a CPC regsiter is in PCC */
+/* Check if a CPC register is in PCC */
 #define CPC_IN_PCC(cpc) ((cpc)->type == ACPI_TYPE_BUFFER &&		\
 				(cpc)->cpc_entry.reg.space_id ==	\
 				ACPI_ADR_SPACE_PLATFORM_COMM)

drivers/clk/qcom/common.c

···
 
 /*
  * Backwards compatibility with old DTs. Register a pass-through factor 1/1
- * clock to translate 'path' clk into 'name' clk and regsiter the 'path'
+ * clock to translate 'path' clk into 'name' clk and register the 'path'
  * clk as a fixed rate clock if it isn't present.
  */
 static int _qcom_cc_register_board_clk(struct device *dev, const char *path,

drivers/cpufreq/sti-cpufreq.c

···
 	return 0;
 }
 
-static int sti_cpufreq_fetch_syscon_regsiters(void)
+static int sti_cpufreq_fetch_syscon_registers(void)
 {
 	struct device *dev = ddata.cpu;
 	struct device_node *np = dev->of_node;
···
 		goto skip_voltage_scaling;
 	}
 
-	ret = sti_cpufreq_fetch_syscon_regsiters();
+	ret = sti_cpufreq_fetch_syscon_registers();
 	if (ret)
 		goto skip_voltage_scaling;
 

drivers/infiniband/hw/hns/hns_roce_hw_v1.c

···
 	roce_set_field(mpt_entry->mpt_byte_64, MPT_BYTE_64_L_KEY_IDX_H_M,
 		       MPT_BYTE_64_L_KEY_IDX_H_S, mtpt_idx >> MTPT_IDX_SHIFT);
 
-	/* DMA memory regsiter */
+	/* DMA memory register */
 	if (mr->type == MR_TYPE_DMA)
 		return 0;
 

drivers/infiniband/hw/hns/hns_roce_mr.c

···
 		return 0;
 	}
 
-	/* Note: if page_shift is zero, FAST memory regsiter */
+	/* Note: if page_shift is zero, FAST memory register */
 	mtt->page_shift = page_shift;
 
 	/* Compute MTT entry necessary */

drivers/net/can/rcar/rcar_canfd.c

···
 /* RSCFDnRPGACCr */
 #define RCANFD_C_RPGACC(r)		(0x1900 + (0x04 * (r)))
 
-/* CAN FD mode specific regsiter map */
+/* CAN FD mode specific register map */
 
 /* RSCFDnCFDCmXXX -> RCANFD_F_XXX(m) */
 #define RCANFD_F_DCFG(m)		(0x0500 + (0x20 * (m)))

drivers/net/ethernet/amd/amd8111e.h

···
 /* 32 bit registers */
 
 #define  ASF_STAT		0x00	/* ASF status register */
-#define CHIPID			0x04	/* Chip ID regsiter */
+#define CHIPID			0x04	/* Chip ID register */
 #define	MIB_DATA		0x10	/* MIB data register */
 #define MIB_ADDR		0x14	/* MIB address register */
 #define STAT0			0x30	/* Status0 register */
···
 /* driver ioctl parameters */
 #define AMD8111E_REG_DUMP_LEN	 13*sizeof(u32)
 
-/* amd8111e desriptor format */
+/* amd8111e descriptor format */
 
 struct amd8111e_tx_dr{
 

drivers/net/ethernet/atheros/atl1c/atl1c_hw.c

···
 
 /*
  * atl1c_read_phy_core
- * core function to read register in PHY via MDIO control regsiter.
+ * core function to read register in PHY via MDIO control register.
  * ext: extension register (see IEEE 802.3)
  * dev: device address (see IEEE 802.3 DEVAD, PRTAD is fixed to 0)
  * reg: reg to read

drivers/net/ethernet/intel/igb/e1000_phy.c

···
  *  @offset: register offset to be read
  *  @data: pointer to the read data
  *
- *  Reads the MDI control regsiter in the PHY at offset and stores the
+ *  Reads the MDI control register in the PHY at offset and stores the
  *  information read to data.
  **/
 s32 igb_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data)

drivers/scsi/isci/registers.h

···
 
 
 /*
- * TODO: Where is the SAS_LNKTOV regsiter?
+ * TODO: Where is the SAS_LNKTOV register?
  * TODO: Where is the SAS_PHYTOV register? */
 
 #define SCU_SAS_TRANSMIT_IDENTIFICATION_SMP_TARGET_SHIFT            (1)
···
 };
 
 /**
- * struct scu_registers - SCU regsiters including both PEG registers if we turn
+ * struct scu_registers - SCU registers including both PEG registers if we turn
  *    on that compile option. All of these registers are in the memory mapped
  *    space returned from BAR1.
  *

drivers/scsi/mpt3sas/mpt3sas_base.h

···
 	Mpi2EventNotificationReply_t *mpi_reply);
 
 void mpt3sas_enable_diag_buffer(struct MPT3SAS_ADAPTER *ioc,
-	u8 bits_to_regsiter);
+	u8 bits_to_register);
 int mpt3sas_send_diag_release(struct MPT3SAS_ADAPTER *ioc, u8 buffer_type,
 	u8 *issue_reset);
 

include/linux/bcma/bcma_driver_pci.h

···
 #define  BCMA_CORE_PCI_MDIODATA_DEV_TX		0x1e	/* SERDES TX Dev */
 #define  BCMA_CORE_PCI_MDIODATA_DEV_RX		0x1f	/* SERDES RX Dev */
 #define BCMA_CORE_PCI_PCIEIND_ADDR		0x0130	/* indirect access to the internal register */
-#define BCMA_CORE_PCI_PCIEIND_DATA		0x0134	/* Data to/from the internal regsiter */
+#define BCMA_CORE_PCI_PCIEIND_DATA		0x0134	/* Data to/from the internal register */
 #define BCMA_CORE_PCI_CLKREQENCTRL		0x0138	/*  >= rev 6, Clkreq rdma control */
 #define BCMA_CORE_PCI_PCICFG0			0x0400	/* PCI config space 0 (rev >= 8) */
 #define BCMA_CORE_PCI_PCICFG1			0x0500	/* PCI config space 1 (rev >= 8) */

include/linux/ftrace.h

···
  * CONTROL, SAVE_REGS, SAVE_REGS_IF_SUPPORTED, RECURSION_SAFE, STUB and
  * IPMODIFY are a kind of attribute flags which can be set only before
  * registering the ftrace_ops, and can not be modified while registered.
- * Changing those attribute flags after regsitering ftrace_ops will
+ * Changing those attribute flags after registering ftrace_ops will
  * cause unexpected results.
  *
  * ENABLED - set/unset when ftrace_ops is registered/unregistered

include/uapi/linux/ipmi.h

···
 #define IPMICTL_REGISTER_FOR_CMD	_IOR(IPMI_IOC_MAGIC, 14,	\
 					     struct ipmi_cmdspec)
 /*
- * Unregister a regsitered command.  error values:
+ * Unregister a registered command.  error values:
  *  - EFAULT - an address supplied was invalid.
  *  - ENOENT - The netfn/cmd was not found registered for this user.
  */

scripts/spelling.txt

···
 registeresd||registered
 registes||registers
 registraration||registration
+regsiter||register
 regster||register
 regualar||regular
 reguator||regulator

sound/soc/soc-core.c

···
  *
  * @dlc: name of the DAI and optional component info to match
  *
- * This function will search all regsitered components and their DAIs to
+ * This function will search all registered components and their DAIs to
  * find the DAI of the same name. The component's of_node and name
  * should also match if being specified.
  *