clk: qcom: camcc-sm6350: Fix PLL config of PLL2

The 'Agera' PLLs (with clk_agera_pll_configure) do not take some of the
parameters that are provided in the vendor driver. Instead the upstream
configuration should provide the final user_ctl value that is written to
the USER_CTL register.

Fix the config so that the PLL is configured correctly, and fixes
CAMCC_MCLK* being stuck off.

Fixes: 80f5451d9a7c ("clk: qcom: Add camera clock controller driver for SM6350")
Suggested-by: Taniya Das <[e-mail]>
Signed-off-by: Luca Weiss <[e-mail]>
Reviewed-by: Abel Vesa <[e-mail]>
Reviewed-by: Taniya Das <[e-mail]>
Link: https://lore.kernel.org/r/[e-mail]
Signed-off-by: Bjorn Andersson <[e-mail]>

drivers/clk/qcom/camcc-sm6350.c

···
 static const struct alpha_pll_config camcc_pll2_config = {
 	.l = 0x64,
 	.alpha = 0x0,
-	.post_div_val = 0x3 << 8,
-	.post_div_mask = 0x3 << 8,
-	.aux_output_mask = BIT(1),
-	.main_output_mask = BIT(0),
-	.early_output_mask = BIT(3),
 	.config_ctl_val = 0x20000800,
 	.config_ctl_hi_val = 0x400003d2,
 	.test_ctl_val = 0x04000400,
 	.test_ctl_hi_val = 0x00004000,
+	.user_ctl_val = 0x0000030b,
 };
 
 static struct clk_alpha_pll camcc_pll2 = {