drivers: ata: add support for Ceva sata host controller

Adds support for Ceva sata host controller on Xilinx
Zynq UltraScale+ MPSoC.

Signed-off-by: Suneel Garapati <[e-mail]>
Acked-by: Hans de Goede <[e-mail]>
Signed-off-by: Tejun Heo <[e-mail]>

drivers/ata/Kconfig

···
 
 	  If unsure, say N.
 
+config AHCI_CEVA
+	tristate "CEVA AHCI SATA support"
+	depends on OF
+	help
+	  This option enables support for the CEVA AHCI SATA.
+	  It can be found on the Xilinx Zynq UltraScale+ MPSoC.
+
+	  If unsure, say N.
+
 config AHCI_MVEBU
 	tristate "Marvell EBU AHCI SATA support"
 	depends on ARCH_MVEBU

drivers/ata/Makefile

···
 obj-$(CONFIG_SATA_DWC)		+= sata_dwc_460ex.o
 obj-$(CONFIG_SATA_HIGHBANK)	+= sata_highbank.o libahci.o
 obj-$(CONFIG_AHCI_BRCMSTB)	+= ahci_brcmstb.o libahci.o libahci_platform.o
+obj-$(CONFIG_AHCI_CEVA)		+= ahci_ceva.o libahci.o libahci_platform.o
 obj-$(CONFIG_AHCI_DA850)	+= ahci_da850.o libahci.o libahci_platform.o
 obj-$(CONFIG_AHCI_IMX)		+= ahci_imx.o libahci.o libahci_platform.o
 obj-$(CONFIG_AHCI_MVEBU)	+= ahci_mvebu.o libahci.o libahci_platform.o

drivers/ata/ahci_ceva.c

···
+/*
+ * Copyright (C) 2015 Xilinx, Inc.
+ * CEVA AHCI SATA platform driver
+ *
+ * based on the AHCI SATA platform driver by Jeff Garzik and Anton Vorontsov
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/ahci_platform.h>
+#include <linux/kernel.h>
+#include <linux/libata.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include "ahci.h"
+
+/* Vendor Specific Register Offsets */
+#define AHCI_VEND_PCFG  0xA4
+#define AHCI_VEND_PPCFG 0xA8
+#define AHCI_VEND_PP2C  0xAC
+#define AHCI_VEND_PP3C  0xB0
+#define AHCI_VEND_PP4C  0xB4
+#define AHCI_VEND_PP5C  0xB8
+#define AHCI_VEND_PAXIC 0xC0
+#define AHCI_VEND_PTC   0xC8
+
+/* Vendor Specific Register bit definitions */
+#define PAXIC_ADBW_BW64 0x1
+#define PAXIC_MAWIDD	(1 << 8)
+#define PAXIC_MARIDD	(1 << 16)
+#define PAXIC_OTL	(0x4 << 20)
+
+#define PCFG_TPSS_VAL	(0x32 << 16)
+#define PCFG_TPRS_VAL	(0x2 << 12)
+#define PCFG_PAD_VAL	0x2
+
+#define PPCFG_TTA	0x1FFFE
+#define PPCFG_PSSO_EN	(1 << 28)
+#define PPCFG_PSS_EN	(1 << 29)
+#define PPCFG_ESDF_EN	(1 << 31)
+
+#define PP2C_CIBGMN	0x0F
+#define PP2C_CIBGMX	(0x25 << 8)
+#define PP2C_CIBGN	(0x18 << 16)
+#define PP2C_CINMP	(0x29 << 24)
+
+#define PP3C_CWBGMN	0x04
+#define PP3C_CWBGMX	(0x0B << 8)
+#define PP3C_CWBGN	(0x08 << 16)
+#define PP3C_CWNMP	(0x0F << 24)
+
+#define PP4C_BMX	0x0a
+#define PP4C_BNM	(0x08 << 8)
+#define PP4C_SFD	(0x4a << 16)
+#define PP4C_PTST	(0x06 << 24)
+
+#define PP5C_RIT	0x60216
+#define PP5C_RCT	(0x7f0 << 20)
+
+#define PTC_RX_WM_VAL	0x40
+#define PTC_RSVD	(1 << 27)
+
+#define PORT0_BASE	0x100
+#define PORT1_BASE	0x180
+
+/* Port Control Register Bit Definitions */
+#define PORT_SCTL_SPD_GEN2	(0x2 << 4)
+#define PORT_SCTL_SPD_GEN1	(0x1 << 4)
+#define PORT_SCTL_IPM		(0x3 << 8)
+
+#define PORT_BASE	0x100
+#define PORT_OFFSET	0x80
+#define NR_PORTS	2
+#define DRV_NAME	"ahci-ceva"
+#define CEVA_FLAG_BROKEN_GEN2	1
+
+struct ceva_ahci_priv {
+	struct platform_device *ahci_pdev;
+	int flags;
+};
+
+static struct ata_port_operations ahci_ceva_ops = {
+	.inherits = &ahci_platform_ops,
+};
+
+static const struct ata_port_info ahci_ceva_port_info = {
+	.flags          = AHCI_FLAG_COMMON,
+	.pio_mask       = ATA_PIO4,
+	.udma_mask      = ATA_UDMA6,
+	.port_ops	= &ahci_ceva_ops,
+};
+
+static void ahci_ceva_setup(struct ahci_host_priv *hpriv)
+{
+	void __iomem *mmio = hpriv->mmio;
+	struct ceva_ahci_priv *cevapriv = hpriv->plat_data;
+	u32 tmp;
+	int i;
+
+	/*
+	 * AXI Data bus width to 64
+	 * Set Mem Addr Read, Write ID for data transfers
+	 * Transfer limit to 72 DWord
+	 */
+	tmp = PAXIC_ADBW_BW64 | PAXIC_MAWIDD | PAXIC_MARIDD | PAXIC_OTL;
+	writel(tmp, mmio + AHCI_VEND_PAXIC);
+
+	/* Set AHCI Enable */
+	tmp = readl(mmio + HOST_CTL);
+	tmp |= HOST_AHCI_EN;
+	writel(tmp, mmio + HOST_CTL);
+
+	for (i = 0; i < NR_PORTS; i++) {
+		/* TPSS TPRS scalars, CISE and Port Addr */
+		tmp = PCFG_TPSS_VAL | PCFG_TPRS_VAL | (PCFG_PAD_VAL + i);
+		writel(tmp, mmio + AHCI_VEND_PCFG);
+
+		/* Port Phy Cfg register enables */
+		tmp = PPCFG_TTA | PPCFG_PSS_EN | PPCFG_ESDF_EN;
+		writel(tmp, mmio + AHCI_VEND_PPCFG);
+
+		/* Phy Control OOB timing parameters COMINIT */
+		tmp = PP2C_CIBGMN | PP2C_CIBGMX | PP2C_CIBGN | PP2C_CINMP;
+		writel(tmp, mmio + AHCI_VEND_PP2C);
+
+		/* Phy Control OOB timing parameters COMWAKE */
+		tmp = PP3C_CWBGMN | PP3C_CWBGMX | PP3C_CWBGN | PP3C_CWNMP;
+		writel(tmp, mmio + AHCI_VEND_PP3C);
+
+		/* Phy Control Burst timing setting */
+		tmp = PP4C_BMX | PP4C_BNM | PP4C_SFD | PP4C_PTST;
+		writel(tmp, mmio + AHCI_VEND_PP4C);
+
+		/* Rate Change Timer and Retry Interval Timer setting */
+		tmp = PP5C_RIT | PP5C_RCT;
+		writel(tmp, mmio + AHCI_VEND_PP5C);
+
+		/* Rx Watermark setting  */
+		tmp = PTC_RX_WM_VAL | PTC_RSVD;
+		writel(tmp, mmio + AHCI_VEND_PTC);
+
+		/* Default to Gen 2 Speed and Gen 1 if Gen2 is broken */
+		tmp = PORT_SCTL_SPD_GEN2 | PORT_SCTL_IPM;
+		if (cevapriv->flags & CEVA_FLAG_BROKEN_GEN2)
+			tmp = PORT_SCTL_SPD_GEN1 | PORT_SCTL_IPM;
+		writel(tmp, mmio + PORT_SCR_CTL + PORT_BASE + PORT_OFFSET * i);
+	}
+}
+
+static struct scsi_host_template ahci_platform_sht = {
+	AHCI_SHT(DRV_NAME),
+};
+
+static int ceva_ahci_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct device *dev = &pdev->dev;
+	struct ahci_host_priv *hpriv;
+	struct ceva_ahci_priv *cevapriv;
+	int rc;
+
+	cevapriv = devm_kzalloc(dev, sizeof(*cevapriv), GFP_KERNEL);
+	if (!cevapriv)
+		return -ENOMEM;
+
+	cevapriv->ahci_pdev = pdev;
+
+	hpriv = ahci_platform_get_resources(pdev);
+	if (IS_ERR(hpriv))
+		return PTR_ERR(hpriv);
+
+	rc = ahci_platform_enable_resources(hpriv);
+	if (rc)
+		return rc;
+
+	if (of_property_read_bool(np, "ceva,broken-gen2"))
+		cevapriv->flags = CEVA_FLAG_BROKEN_GEN2;
+
+	hpriv->plat_data = cevapriv;
+
+	/* CEVA specific initialization */
+	ahci_ceva_setup(hpriv);
+
+	rc = ahci_platform_init_host(pdev, hpriv, &ahci_ceva_port_info,
+					&ahci_platform_sht);
+	if (rc)
+		goto disable_resources;
+
+	return 0;
+
+disable_resources:
+	ahci_platform_disable_resources(hpriv);
+	return rc;
+}
+
+static int __maybe_unused ceva_ahci_suspend(struct device *dev)
+{
+	return ahci_platform_suspend_host(dev);
+}
+
+static int __maybe_unused ceva_ahci_resume(struct device *dev)
+{
+	return ahci_platform_resume_host(dev);
+}
+
+static SIMPLE_DEV_PM_OPS(ahci_ceva_pm_ops, ceva_ahci_suspend, ceva_ahci_resume);
+
+static const struct of_device_id ceva_ahci_of_match[] = {
+	{ .compatible = "ceva,ahci-1v84" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, ceva_ahci_of_match);
+
+static struct platform_driver ceva_ahci_driver = {
+	.probe = ceva_ahci_probe,
+	.remove = ata_platform_remove_one,
+	.driver = {
+		.name = DRV_NAME,
+		.of_match_table = ceva_ahci_of_match,
+		.pm = &ahci_ceva_pm_ops,
+	},
+};
+module_platform_driver(ceva_ahci_driver);
+
+MODULE_DESCRIPTION("CEVA AHCI SATA platform driver");
+MODULE_AUTHOR("Xilinx Inc.");
+MODULE_LICENSE("GPL v2");