Merge tag 'soc-fixes-6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC fixes from Arnd Bergmann:
"Most of the changes are devicetree fixes for NXP, Mediatek, Rockchips
Arm machines as well as Microchip RISC-V, and most of these address
build-time warnings for spec violations and other minor issues. One of
the Mediatek warnings was enabled by default and prevented a clean
build.

The ones that address serious runtime issues are all on the i.MX
platform:

- a boot time panic on imx8qm

- USB hanging under load on imx8

- regressions on the imx93 ethernet phy

Code fixes include a minor error handling for the i.MX PMU driver, and
a number of firmware driver fixes:

- OP-TEE fix for supplicant based device enumeration, and a new sysfs
attribute to needed to fix a race against userspace

- Arm SCMI fix for possible truncation/overflow in the frequency
computations

- Multiple FF-A fixes for the newly added notification support"

* tag 'soc-fixes-6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (55 commits)
MAINTAINERS: change the S32G2 maintainer's email address.
arm64: dts: rockchip: Fix eMMC Data Strobe PD on rk3588
ARM: dts: imx28-xea: Pass the 'model' property
ARM: dts: imx7: Declare timers compatible with fsl,imx6dl-gpt
MAINTAINERS: reinstate freescale ARM64 DT directory in i.MX entry
arm64: dts: imx8-apalis: set wifi regulator to always-on
ARM: imx: Check return value of devm_kasprintf in imx_mmdc_perf_init
arm64: dts: imx8ulp: update gpio node name to align with register address
arm64: dts: imx93: update gpio node name to align with register address
arm64: dts: imx93: correct mediamix power
arm64: dts: imx8qm: Add imx8qm's own pm to avoid panic during startup
arm64: dts: freescale: imx8-ss-dma: Fix #pwm-cells
arm64: dts: freescale: imx8-ss-lsio: Fix #pwm-cells
dt-bindings: pwm: imx-pwm: Unify #pwm-cells for all compatibles
ARM: dts: imx6ul-pico: Describe the Ethernet PHY clock
arm64: dts: imx8mp: imx8mq: Add parkmode-disable-ss-quirk on DWC3
arm64: dts: rockchip: Fix PCI node addresses on rk3399-gru
arm64: dts: rockchip: drop interrupt-names property from rk3588s dfi
firmware: arm_scmi: Fix possible frequency truncation when using level indexing mode
firmware: arm_scmi: Fix frequency truncation by promoting multiplier type
...

Documentation/ABI/testing/sysfs-bus-optee-devices

···
 		OP-TEE bus provides reference to registered drivers under this directory. The <uuid>
 		matches Trusted Application (TA) driver and corresponding TA in secure OS. Drivers
 		are free to create needed API under optee-ta-<uuid> directory.
+
+What:		/sys/bus/tee/devices/optee-ta-<uuid>/need_supplicant
+Date:		November 2023
+KernelVersion:	6.7
+Contact:	[e-mail]
+Description:
+		Allows to distinguish whether an OP-TEE based TA/device requires user-space
+		tee-supplicant to function properly or not. This attribute will be present for
+		devices which depend on tee-supplicant to be running.

Documentation/devicetree/bindings/pwm/imx-pwm.yaml

···
 
 properties:
   "#pwm-cells":
-    description: |
-      Should be 2 for i.MX1 and 3 for i.MX27 and newer SoCs. See pwm.yaml
-      in this directory for a description of the cells format.
-    enum:
-      - 2
-      - 3
+    description:
+      The only third cell flag supported by this binding is
+      PWM_POLARITY_INVERTED. fsl,imx1-pwm does not support this flags.
+    const: 3
 
   compatible:
     oneOf:

Documentation/devicetree/bindings/soc/rockchip/grf.yaml

···
               - rockchip,rk3399-grf
               - rockchip,rk3399-pmugrf
               - rockchip,rk3568-pmugrf
+              - rockchip,rk3588-pmugrf
               - rockchip,rv1108-grf
               - rockchip,rv1108-pmugrf
 

MAINTAINERS

···
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git
 F:	arch/arm/boot/dts/nxp/imx/
 F:	arch/arm/boot/dts/nxp/mxs/
+F:	arch/arm64/boot/dts/freescale/
 X:	arch/arm64/boot/dts/freescale/fsl-*
 X:	arch/arm64/boot/dts/freescale/qoriq-*
 X:	drivers/media/i2c/
···
 F:	drivers/*/*wpcm*
 
 ARM/NXP S32G ARCHITECTURE
-M:	Chester Lin <[e-mail]>
+M:	Chester Lin <[e-mail]>
 R:	Andreas Färber <[e-mail]>
 R:	Matthias Brugger <[e-mail]>
 R:	NXP S32 Linux Team <[e-mail]>

arch/arm/boot/dts/broadcom/bcm2711-rpi-400.dts

···
 	gpios = <&gpio 42 GPIO_ACTIVE_HIGH>;
 };
 
-&leds {
-	/delete-node/ led_act;
-};
+/delete-node/ &led_act;
 
 &pm {
 	/delete-property/ system-power-controller;

arch/arm/boot/dts/nxp/imx/imx6q-skov-reve-mi1010ait-1cp1.dts

···
 
 &clks {
 	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
-			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>, <&clks IMX6QDL_CLK_ENET_REF_SEL>;
 	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>,
-				 <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>;
+				 <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>, <&clk50m_phy>;
 };
 
 &hdmi {

arch/arm/boot/dts/nxp/imx/imx6ul-pico.dtsi

···
 			max-speed = <100>;
 			interrupt-parent = <&gpio5>;
 			interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&clks IMX6UL_CLK_ENET_REF>;
+			clock-names = "rmii-ref";
 		};
 	};
 };

arch/arm/boot/dts/nxp/imx/imx7s.dtsi

···
 			};
 
 			gpt1: timer@302d0000 {
-				compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
+				compatible = "fsl,imx7d-gpt", "fsl,imx6dl-gpt";
 				reg = <0x302d0000 0x10000>;
 				interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX7D_GPT1_ROOT_CLK>,
···
 			};
 
 			gpt2: timer@302e0000 {
-				compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
+				compatible = "fsl,imx7d-gpt", "fsl,imx6dl-gpt";
 				reg = <0x302e0000 0x10000>;
 				interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX7D_GPT2_ROOT_CLK>,
···
 			};
 
 			gpt3: timer@302f0000 {
-				compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
+				compatible = "fsl,imx7d-gpt", "fsl,imx6dl-gpt";
 				reg = <0x302f0000 0x10000>;
 				interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX7D_GPT3_ROOT_CLK>,
···
 			};
 
 			gpt4: timer@30300000 {
-				compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
+				compatible = "fsl,imx7d-gpt", "fsl,imx6dl-gpt";
 				reg = <0x30300000 0x10000>;
 				interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX7D_GPT4_ROOT_CLK>,

arch/arm/boot/dts/nxp/mxs/imx28-xea.dts

···
 #include "imx28-lwe.dtsi"
 
 / {
+	model = "Liebherr XEA board";
 	compatible = "lwn,imx28-xea", "fsl,imx28";
 };
 

arch/arm/boot/dts/rockchip/rk3128.dtsi

···
 			};
 
 			sdmmc_pwren: sdmmc-pwren {
-				rockchip,pins = <1 RK_PB6 1 &pcfg_pull_default>;
+				rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_default>;
 			};
 
 			sdmmc_bus4: sdmmc-bus4 {

arch/arm/boot/dts/rockchip/rk322x.dtsi

···
 
 			power-domain@RK3228_PD_VOP {
 				reg = <RK3228_PD_VOP>;
-				clocks =<&cru ACLK_VOP>,
-					<&cru DCLK_VOP>,
-					<&cru HCLK_VOP>;
+				clocks = <&cru ACLK_VOP>,
+					 <&cru DCLK_VOP>,
+					 <&cru HCLK_VOP>;
 				pm_qos = <&qos_vop>;
 				#power-domain-cells = <0>;
 			};

arch/arm/mach-imx/mmdc.c

···
 
 	name = devm_kasprintf(&pdev->dev,
 				GFP_KERNEL, "mmdc%d", ret);
+	if (!name) {
+		ret = -ENOMEM;
+		goto pmu_release_id;
+	}
 
 	pmu_mmdc->mmdc_ipg_clk = mmdc_ipg_clk;
 	pmu_mmdc->devtype_data = (struct fsl_mmdc_devtype_data *)of_id->data;
···
 
 pmu_register_err:
 	pr_warn("MMDC Perf PMU failed (%d), disabled\n", ret);
-	ida_simple_remove(&mmdc_ida, pmu_mmdc->id);
 	cpuhp_state_remove_instance_nocalls(cpuhp_mmdc_state, &pmu_mmdc->node);
 	hrtimer_cancel(&pmu_mmdc->hrtimer);
+pmu_release_id:
+	ida_simple_remove(&mmdc_ida, pmu_mmdc->id);
 pmu_free:
 	kfree(pmu_mmdc);
 	return ret;

arch/arm64/boot/dts/freescale/imx8-apalis-v1.1.dtsi

···
 		pinctrl-0 = <&pinctrl_wifi_pdn>;
 		gpio = <&lsio_gpio1 28 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
+		regulator-always-on;
 		regulator-name = "wifi_pwrdn_fake_regulator";
 		regulator-settling-time-us = <100>;
-
-		regulator-state-mem {
-			regulator-off-in-suspend;
-		};
 	};
 
 	reg_pcie_switch: regulator-pcie-switch {

arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi

···
 		clock-names = "ipg", "per";
 		assigned-clocks = <&clk IMX_SC_R_LCD_0_PWM_0 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <24000000>;
-		#pwm-cells = <2>;
+		#pwm-cells = <3>;
 		power-domains = <&pd IMX_SC_R_LCD_0_PWM_0>;
 	};
 

arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi

···
 			 <&pwm0_lpcg 1>;
 		assigned-clocks = <&clk IMX_SC_R_PWM_0 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <24000000>;
-		#pwm-cells = <2>;
+		#pwm-cells = <3>;
 		interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
 		status = "disabled";
 	};
···
 			 <&pwm1_lpcg 1>;
 		assigned-clocks = <&clk IMX_SC_R_PWM_1 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <24000000>;
-		#pwm-cells = <2>;
+		#pwm-cells = <3>;
 		interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
 		status = "disabled";
 	};
···
 			 <&pwm2_lpcg 1>;
 		assigned-clocks = <&clk IMX_SC_R_PWM_2 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <24000000>;
-		#pwm-cells = <2>;
+		#pwm-cells = <3>;
 		interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
 		status = "disabled";
 	};
···
 			 <&pwm3_lpcg 1>;
 		assigned-clocks = <&clk IMX_SC_R_PWM_3 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <24000000>;
-		#pwm-cells = <2>;
+		#pwm-cells = <3>;
 		interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
 		status = "disabled";
 	};

arch/arm64/boot/dts/freescale/imx8mp.dtsi

···
 				phys = <&usb3_phy0>, <&usb3_phy0>;
 				phy-names = "usb2-phy", "usb3-phy";
 				snps,gfladj-refclk-lpm-sel-quirk;
+				snps,parkmode-disable-ss-quirk;
 			};
 
 		};
···
 				phys = <&usb3_phy1>, <&usb3_phy1>;
 				phy-names = "usb2-phy", "usb3-phy";
 				snps,gfladj-refclk-lpm-sel-quirk;
+				snps,parkmode-disable-ss-quirk;
 			};
 		};
 

arch/arm64/boot/dts/freescale/imx8mq.dtsi

···
 			phys = <&usb3_phy0>, <&usb3_phy0>;
 			phy-names = "usb2-phy", "usb3-phy";
 			power-domains = <&pgc_otg1>;
+			snps,parkmode-disable-ss-quirk;
 			status = "disabled";
 		};
 
···
 			phys = <&usb3_phy1>, <&usb3_phy1>;
 			phy-names = "usb2-phy", "usb3-phy";
 			power-domains = <&pgc_otg2>;
+			snps,parkmode-disable-ss-quirk;
 			status = "disabled";
 		};
 

arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi

···
 	status = "okay";
 };
 
+&edma3 {
+	power-domains = <&pd IMX_SC_R_DMA_1_CH0>,
+		     <&pd IMX_SC_R_DMA_1_CH1>,
+		     <&pd IMX_SC_R_DMA_1_CH2>,
+		     <&pd IMX_SC_R_DMA_1_CH3>,
+		     <&pd IMX_SC_R_DMA_1_CH4>,
+		     <&pd IMX_SC_R_DMA_1_CH5>,
+		     <&pd IMX_SC_R_DMA_1_CH6>,
+		     <&pd IMX_SC_R_DMA_1_CH7>;
+};
+
 &flexcan1 {
 	fsl,clk-source = /bits/ 8 <1>;
 };

arch/arm64/boot/dts/freescale/imx8ulp.dtsi

···
 			};
 		};
 
-		gpioe: gpio@2d000080 {
+		gpioe: gpio@2d000000 {
 				compatible = "fsl,imx8ulp-gpio";
 				reg = <0x2d000000 0x1000>;
 				gpio-controller;
···
 				gpio-ranges = <&iomuxc1 0 32 24>;
 		};
 
-		gpiof: gpio@2d010080 {
+		gpiof: gpio@2d010000 {
 				compatible = "fsl,imx8ulp-gpio";
 				reg = <0x2d010000 0x1000>;
 				gpio-controller;
···
 			};
 		};
 
-		gpiod: gpio@2e200080 {
+		gpiod: gpio@2e200000 {
 			compatible = "fsl,imx8ulp-gpio";
 			reg = <0x2e200000 0x1000>;
 			gpio-controller;

arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts

···
 		fsl,pins = <
 			MX93_PAD_UART2_TXD__LPUART2_TX		0x31e
 			MX93_PAD_UART2_RXD__LPUART2_RX		0x31e
-			MX93_PAD_SAI1_TXD0__LPUART2_RTS_B	0x31e
+			MX93_PAD_SAI1_TXD0__LPUART2_RTS_B	0x51e
 		>;
 	};
 

arch/arm64/boot/dts/freescale/imx93.dtsi

···
 					compatible = "fsl,imx93-src-slice";
 					reg = <0x44462400 0x400>, <0x44465800 0x400>;
 					#power-domain-cells = <0>;
-					clocks = <&clk IMX93_CLK_MEDIA_AXI>,
+					clocks = <&clk IMX93_CLK_NIC_MEDIA_GATE>,
 						 <&clk IMX93_CLK_MEDIA_APB>;
 				};
 			};
···
 			};
 		};
 
-		gpio2: gpio@43810080 {
+		gpio2: gpio@43810000 {
 			compatible = "fsl,imx93-gpio", "fsl,imx8ulp-gpio";
 			reg = <0x43810000 0x1000>;
 			gpio-controller;
···
 			gpio-ranges = <&iomuxc 0 4 30>;
 		};
 
-		gpio3: gpio@43820080 {
+		gpio3: gpio@43820000 {
 			compatible = "fsl,imx93-gpio", "fsl,imx8ulp-gpio";
 			reg = <0x43820000 0x1000>;
 			gpio-controller;
···
 				      <&iomuxc 26 34 2>, <&iomuxc 28 0 4>;
 		};
 
-		gpio4: gpio@43830080 {
+		gpio4: gpio@43830000 {
 			compatible = "fsl,imx93-gpio", "fsl,imx8ulp-gpio";
 			reg = <0x43830000 0x1000>;
 			gpio-controller;
···
 			gpio-ranges = <&iomuxc 0 38 28>, <&iomuxc 28 36 2>;
 		};
 
-		gpio1: gpio@47400080 {
+		gpio1: gpio@47400000 {
 			compatible = "fsl,imx93-gpio", "fsl,imx8ulp-gpio";
 			reg = <0x47400000 0x1000>;
 			gpio-controller;

arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts

···
 		};
 	};
 
-	memory {
+	memory@40000000 {
 		reg = <0 0x40000000 0 0x40000000>;
 	};
 

arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts

···
 		};
 	};
 
-	memory {
+	memory@40000000 {
 		reg = <0 0x40000000 0 0x20000000>;
 	};
 

arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts

···
 		compatible = "sff,sfp";
 		i2c-bus = <&i2c_sfp1>;
 		los-gpios = <&pio 46 GPIO_ACTIVE_HIGH>;
+		maximum-power-milliwatt = <3000>;
 		mod-def0-gpios = <&pio 49 GPIO_ACTIVE_LOW>;
 		tx-disable-gpios = <&pio 20 GPIO_ACTIVE_HIGH>;
 		tx-fault-gpios = <&pio 7 GPIO_ACTIVE_HIGH>;
···
 		i2c-bus = <&i2c_sfp2>;
 		los-gpios = <&pio 31 GPIO_ACTIVE_HIGH>;
 		mod-def0-gpios = <&pio 47 GPIO_ACTIVE_LOW>;
+		maximum-power-milliwatt = <3000>;
 		tx-disable-gpios = <&pio 15 GPIO_ACTIVE_HIGH>;
 		tx-fault-gpios = <&pio 48 GPIO_ACTIVE_HIGH>;
 	};
···
 			trip = <&cpu_trip_active_high>;
 		};
 
-		cpu-active-low {
+		cpu-active-med {
 			/* active: set fan to cooling level 1 */
 			cooling-device = <&fan 1 1>;
-			trip = <&cpu_trip_active_low>;
+			trip = <&cpu_trip_active_med>;
 		};
 
-		cpu-passive {
-			/* passive: set fan to cooling level 0 */
+		cpu-active-low {
+			/* active: set fan to cooling level 0 */
 			cooling-device = <&fan 0 0>;
-			trip = <&cpu_trip_passive>;
+			trip = <&cpu_trip_active_low>;
 		};
 	};
 };

arch/arm64/boot/dts/mediatek/mt7986a.dtsi

···
 			reg = <0 0x11230000 0 0x1000>,
 			      <0 0x11c20000 0 0x1000>;
 			interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+			assigned-clocks = <&topckgen CLK_TOP_EMMC_416M_SEL>,
+					  <&topckgen CLK_TOP_EMMC_250M_SEL>;
+			assigned-clock-parents = <&apmixedsys CLK_APMIXED_MPLL>,
+						 <&topckgen CLK_TOP_NET1PLL_D5_D2>;
 			clocks = <&topckgen CLK_TOP_EMMC_416M_SEL>,
 				 <&infracfg CLK_INFRA_MSDC_HCK_CK>,
 				 <&infracfg CLK_INFRA_MSDC_CK>,
···
 			thermal-sensors = <&thermal 0>;
 
 			trips {
+				cpu_trip_crit: crit {
+					temperature = <125000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+
+				cpu_trip_hot: hot {
+					temperature = <120000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
 				cpu_trip_active_high: active-high {
 					temperature = <115000>;
 					hysteresis = <2000>;
 					type = "active";
 				};
 
-				cpu_trip_active_low: active-low {
+				cpu_trip_active_med: active-med {
 					temperature = <85000>;
 					hysteresis = <2000>;
 					type = "active";
 				};
 
-				cpu_trip_passive: passive {
-					temperature = <40000>;
+				cpu_trip_active_low: active-low {
+					temperature = <60000>;
 					hysteresis = <2000>;
-					type = "passive";
+					type = "active";
 				};
 			};
 		};

arch/arm64/boot/dts/mediatek/mt8173-evb.dts

···
 		id-gpio = <&pio 16 GPIO_ACTIVE_HIGH>;
 	};
 
-	usb_p1_vbus: regulator@0 {
+	usb_p1_vbus: regulator-usb-p1 {
 		compatible = "regulator-fixed";
 		regulator-name = "usb_vbus";
 		regulator-min-microvolt = <5000000>;
···
 		enable-active-high;
 	};
 
-	usb_p0_vbus: regulator@1 {
+	usb_p0_vbus: regulator-usb-p0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vbus";
 		regulator-min-microvolt = <5000000>;

arch/arm64/boot/dts/mediatek/mt8183-evb.dts

···
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges;
-		scp_mem_reserved: scp_mem_region {
+		scp_mem_reserved: memory@50000000 {
 			compatible = "shared-dma-pool";
 			reg = <0 0x50000000 0 0x2900000>;
 			no-map;
 		};
 	};
 
-	ntc@0 {
+	thermal-sensor {
 		compatible = "murata,ncp03wf104";
 		pullup-uv = <1800000>;
 		pullup-ohm = <390000>;

arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi

···
 
 &dsi0 {
 	status = "okay";
+	/delete-property/#size-cells;
+	/delete-property/#address-cells;
 	/delete-node/panel@0;
 	ports {
 		port {
···
 	};
 
 	touchscreen_pins: touchscreen-pins {
-		touch_int_odl {
+		touch-int-odl {
 			pinmux = <PINMUX_GPIO155__FUNC_GPIO155>;
 			input-enable;
 			bias-pull-up;
 		};
 
-		touch_rst_l {
+		touch-rst-l {
 			pinmux = <PINMUX_GPIO156__FUNC_GPIO156>;
 			output-high;
 		};
 	};
 
 	trackpad_pins: trackpad-pins {
-		trackpad_int {
+		trackpad-int {
 			pinmux = <PINMUX_GPIO7__FUNC_GPIO7>;
 			input-enable;
 			bias-disable; /* pulled externally */

arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi

···
 		#size-cells = <2>;
 		ranges;
 
-		scp_mem_reserved: scp_mem_region {
+		scp_mem_reserved: memory@50000000 {
 			compatible = "shared-dma-pool";
 			reg = <0 0x50000000 0 0x2900000>;
 			no-map;
···
 
 &pio {
 	aud_pins_default: audiopins {
-		pins_bus {
+		pins-bus {
 			pinmux = <PINMUX_GPIO97__FUNC_I2S2_MCK>,
 				<PINMUX_GPIO98__FUNC_I2S2_BCK>,
 				<PINMUX_GPIO101__FUNC_I2S2_LRCK>,
···
 	};
 
 	aud_pins_tdm_out_on: audiotdmouton {
-		pins_bus {
+		pins-bus {
 			pinmux = <PINMUX_GPIO169__FUNC_TDM_BCK_2ND>,
 				<PINMUX_GPIO170__FUNC_TDM_LRCK_2ND>,
 				<PINMUX_GPIO171__FUNC_TDM_DATA0_2ND>,
···
 	};
 
 	aud_pins_tdm_out_off: audiotdmoutoff {
-		pins_bus {
+		pins-bus {
 			pinmux = <PINMUX_GPIO169__FUNC_GPIO169>,
 				<PINMUX_GPIO170__FUNC_GPIO170>,
 				<PINMUX_GPIO171__FUNC_GPIO171>,
···
 	};
 
 	bt_pins: bt-pins {
-		pins_bt_en {
+		pins-bt-en {
 			pinmux = <PINMUX_GPIO120__FUNC_GPIO120>;
 			output-low;
 		};
 	};
 
-	ec_ap_int_odl: ec_ap_int_odl {
+	ec_ap_int_odl: ec-ap-int-odl {
 		pins1 {
 			pinmux = <PINMUX_GPIO151__FUNC_GPIO151>;
 			input-enable;
···
 		};
 	};
 
-	h1_int_od_l: h1_int_od_l {
+	h1_int_od_l: h1-int-od-l {
 		pins1 {
 			pinmux = <PINMUX_GPIO153__FUNC_GPIO153>;
 			input-enable;
···
 	};
 
 	i2c0_pins: i2c0 {
-		pins_bus {
+		pins-bus {
 			pinmux = <PINMUX_GPIO82__FUNC_SDA0>,
 				 <PINMUX_GPIO83__FUNC_SCL0>;
 			mediatek,pull-up-adv = <3>;
···
 	};
 
 	i2c1_pins: i2c1 {
-		pins_bus {
+		pins-bus {
 			pinmux = <PINMUX_GPIO81__FUNC_SDA1>,
 				 <PINMUX_GPIO84__FUNC_SCL1>;
 			mediatek,pull-up-adv = <3>;
···
 	};
 
 	i2c2_pins: i2c2 {
-		pins_bus {
+		pins-bus {
 			pinmux = <PINMUX_GPIO103__FUNC_SCL2>,
 				 <PINMUX_GPIO104__FUNC_SDA2>;
 			bias-disable;
···
 	};
 
 	i2c3_pins: i2c3 {
-		pins_bus {
+		pins-bus {
 			pinmux = <PINMUX_GPIO50__FUNC_SCL3>,
 				 <PINMUX_GPIO51__FUNC_SDA3>;
 			mediatek,pull-up-adv = <3>;
···
 	};
 
 	i2c4_pins: i2c4 {
-		pins_bus {
+		pins-bus {
 			pinmux = <PINMUX_GPIO105__FUNC_SCL4>,
 				 <PINMUX_GPIO106__FUNC_SDA4>;
 			bias-disable;
···
 	};
 
 	i2c5_pins: i2c5 {
-		pins_bus {
+		pins-bus {
 			pinmux = <PINMUX_GPIO48__FUNC_SCL5>,
 				 <PINMUX_GPIO49__FUNC_SDA5>;
 			mediatek,pull-up-adv = <3>;
···
 	};
 
 	i2c6_pins: i2c6 {
-		pins_bus {
+		pins-bus {
 			pinmux = <PINMUX_GPIO11__FUNC_SCL6>,
 				 <PINMUX_GPIO12__FUNC_SDA6>;
 			bias-disable;
···
 	};
 
 	mmc0_pins_default: mmc0-pins-default {
-		pins_cmd_dat {
+		pins-cmd-dat {
 			pinmux = <PINMUX_GPIO123__FUNC_MSDC0_DAT0>,
 				 <PINMUX_GPIO128__FUNC_MSDC0_DAT1>,
 				 <PINMUX_GPIO125__FUNC_MSDC0_DAT2>,
···
 			mediatek,pull-up-adv = <01>;
 		};
 
-		pins_clk {
+		pins-clk {
 			pinmux = <PINMUX_GPIO124__FUNC_MSDC0_CLK>;
 			drive-strength = <MTK_DRIVE_14mA>;
 			mediatek,pull-down-adv = <10>;
 		};
 
-		pins_rst {
+		pins-rst {
 			pinmux = <PINMUX_GPIO133__FUNC_MSDC0_RSTB>;
 			drive-strength = <MTK_DRIVE_14mA>;
 			mediatek,pull-down-adv = <01>;
···
 	};
 
 	mmc0_pins_uhs: mmc0-pins-uhs {
-		pins_cmd_dat {
+		pins-cmd-dat {
 			pinmux = <PINMUX_GPIO123__FUNC_MSDC0_DAT0>,
 				 <PINMUX_GPIO128__FUNC_MSDC0_DAT1>,
 				 <PINMUX_GPIO125__FUNC_MSDC0_DAT2>,
···
 			mediatek,pull-up-adv = <01>;
 		};
 
-		pins_clk {
+		pins-clk {
 			pinmux = <PINMUX_GPIO124__FUNC_MSDC0_CLK>;
 			drive-strength = <MTK_DRIVE_14mA>;
 			mediatek,pull-down-adv = <10>;
 		};
 
-		pins_ds {
+		pins-ds {
 			pinmux = <PINMUX_GPIO131__FUNC_MSDC0_DSL>;
 			drive-strength = <MTK_DRIVE_14mA>;
 			mediatek,pull-down-adv = <10>;
 		};
 
-		pins_rst {
+		pins-rst {
 			pinmux = <PINMUX_GPIO133__FUNC_MSDC0_RSTB>;
 			drive-strength = <MTK_DRIVE_14mA>;
 			mediatek,pull-up-adv = <01>;
···
 	};
 
 	mmc1_pins_default: mmc1-pins-default {
-		pins_cmd_dat {
+		pins-cmd-dat {
 			pinmux = <PINMUX_GPIO31__FUNC_MSDC1_CMD>,
 				 <PINMUX_GPIO32__FUNC_MSDC1_DAT0>,
 				 <PINMUX_GPIO34__FUNC_MSDC1_DAT1>,
···
 			mediatek,pull-up-adv = <10>;
 		};
 
-		pins_clk {
+		pins-clk {
 			pinmux = <PINMUX_GPIO29__FUNC_MSDC1_CLK>;
 			input-enable;
 			mediatek,pull-down-adv = <10>;
···
 	};
 
 	mmc1_pins_uhs: mmc1-pins-uhs {
-		pins_cmd_dat {
+		pins-cmd-dat {
 			pinmux = <PINMUX_GPIO31__FUNC_MSDC1_CMD>,
 				 <PINMUX_GPIO32__FUNC_MSDC1_DAT0>,
 				 <PINMUX_GPIO34__FUNC_MSDC1_DAT1>,
···
 			mediatek,pull-up-adv = <10>;
 		};
 
-		pins_clk {
+		pins-clk {
 			pinmux = <PINMUX_GPIO29__FUNC_MSDC1_CLK>;
 			drive-strength = <MTK_DRIVE_8mA>;
 			mediatek,pull-down-adv = <10>;
···
 		};
 	};
 
-	panel_pins_default: panel_pins_default {
-		panel_reset {
+	panel_pins_default: panel-pins-default {
+		panel-reset {
 			pinmux = <PINMUX_GPIO45__FUNC_GPIO45>;
 			output-low;
 			bias-pull-up;
 		};
 	};
 
-	pwm0_pin_default: pwm0_pin_default {
+	pwm0_pin_default: pwm0-pin-default {
 		pins1 {
 			pinmux = <PINMUX_GPIO176__FUNC_GPIO176>;
 			output-high;
···
 	};
 
 	scp_pins: scp {
-		pins_scp_uart {
+		pins-scp-uart {
 			pinmux = <PINMUX_GPIO110__FUNC_TP_URXD1_AO>,
 				 <PINMUX_GPIO112__FUNC_TP_UTXD1_AO>;
 		};
 	};
 
 	spi0_pins: spi0 {
-		pins_spi {
+		pins-spi {
 			pinmux = <PINMUX_GPIO85__FUNC_SPI0_MI>,
 				 <PINMUX_GPIO86__FUNC_GPIO86>,
 				 <PINMUX_GPIO87__FUNC_SPI0_MO>,
···
 	};
 
 	spi1_pins: spi1 {
-		pins_spi {
+		pins-spi {
 			pinmux = <PINMUX_GPIO161__FUNC_SPI1_A_MI>,
 				 <PINMUX_GPIO162__FUNC_SPI1_A_CSB>,
 				 <PINMUX_GPIO163__FUNC_SPI1_A_MO>,
···
 	};
 
 	spi2_pins: spi2 {
-		pins_spi {
+		pins-spi {
 			pinmux = <PINMUX_GPIO0__FUNC_SPI2_CSB>,
 				 <PINMUX_GPIO1__FUNC_SPI2_MO>,
 				 <PINMUX_GPIO2__FUNC_SPI2_CLK>;
 			bias-disable;
 		};
-		pins_spi_mi {
+		pins-spi-mi {
 			pinmux = <PINMUX_GPIO94__FUNC_SPI2_MI>;
 			mediatek,pull-down-adv = <00>;
 		};
 	};
 
 	spi3_pins: spi3 {
-		pins_spi {
+		pins-spi {
 			pinmux = <PINMUX_GPIO21__FUNC_SPI3_MI>,
 				 <PINMUX_GPIO22__FUNC_SPI3_CSB>,
 				 <PINMUX_GPIO23__FUNC_SPI3_MO>,
···
 	};
 
 	spi4_pins: spi4 {
-		pins_spi {
+		pins-spi {
 			pinmux = <PINMUX_GPIO17__FUNC_SPI4_MI>,
 				 <PINMUX_GPIO18__FUNC_SPI4_CSB>,
 				 <PINMUX_GPIO19__FUNC_SPI4_MO>,
···
 	};
 
 	spi5_pins: spi5 {
-		pins_spi {
+		pins-spi {
 			pinmux = <PINMUX_GPIO13__FUNC_SPI5_MI>,
 				 <PINMUX_GPIO14__FUNC_SPI5_CSB>,
 				 <PINMUX_GPIO15__FUNC_SPI5_MO>,
···
 	};
 
 	uart0_pins_default: uart0-pins-default {
-		pins_rx {
+		pins-rx {
 			pinmux = <PINMUX_GPIO95__FUNC_URXD0>;
 			input-enable;
 			bias-pull-up;
 		};
-		pins_tx {
+		pins-tx {
 			pinmux = <PINMUX_GPIO96__FUNC_UTXD0>;
 		};
 	};
 
 	uart1_pins_default: uart1-pins-default {
-		pins_rx {
+		pins-rx {
 			pinmux = <PINMUX_GPIO121__FUNC_URXD1>;
 			input-enable;
 			bias-pull-up;
 		};
-		pins_tx {
+		pins-tx {
 			pinmux = <PINMUX_GPIO115__FUNC_UTXD1>;
 		};
-		pins_rts {
+		pins-rts {
 			pinmux = <PINMUX_GPIO47__FUNC_URTS1>;
 			output-enable;
 		};
-		pins_cts {
+		pins-cts {
 			pinmux = <PINMUX_GPIO46__FUNC_UCTS1>;
 			input-enable;
 		};
 	};
 
 	uart1_pins_sleep: uart1-pins-sleep {
-		pins_rx {
+		pins-rx {
 			pinmux = <PINMUX_GPIO121__FUNC_GPIO121>;
 			input-enable;
 			bias-pull-up;
 		};
-		pins_tx {
+		pins-tx {
 			pinmux = <PINMUX_GPIO115__FUNC_UTXD1>;
 		};
-		pins_rts {
+		pins-rts {
 			pinmux = <PINMUX_GPIO47__FUNC_URTS1>;
 			output-enable;
 		};
-		pins_cts {
+		pins-cts {
 			pinmux = <PINMUX_GPIO46__FUNC_UCTS1>;
 			input-enable;
 		};
 	};
 
 	wifi_pins_pwrseq: wifi-pins-pwrseq {
-		pins_wifi_enable {
+		pins-wifi-enable {
 			pinmux = <PINMUX_GPIO119__FUNC_GPIO119>;
 			output-low;
 		};
 	};
 
 	wifi_pins_wakeup: wifi-pins-wakeup {
-		pins_wifi_wakeup {
+		pins-wifi-wakeup {
 			pinmux = <PINMUX_GPIO113__FUNC_GPIO113>;
 			input-enable;
 		};

arch/arm64/boot/dts/mediatek/mt8183.dtsi

···
 			nvmem-cell-names = "calibration-data";
 		};
 
-		thermal_zones: thermal-zones {
-			cpu_thermal: cpu-thermal {
-				polling-delay-passive = <100>;
-				polling-delay = <500>;
-				thermal-sensors = <&thermal 0>;
-				sustainable-power = <5000>;
-
-				trips {
-					threshold: trip-point0 {
-						temperature = <68000>;
-						hysteresis = <2000>;
-						type = "passive";
-					};
-
-					target: trip-point1 {
-						temperature = <80000>;
-						hysteresis = <2000>;
-						type = "passive";
-					};
-
-					cpu_crit: cpu-crit {
-						temperature = <115000>;
-						hysteresis = <2000>;
-						type = "critical";
-					};
-				};
-
-				cooling-maps {
-					map0 {
-						trip = <&target>;
-						cooling-device = <&cpu0
-							THERMAL_NO_LIMIT
-							THERMAL_NO_LIMIT>,
-								 <&cpu1
-							THERMAL_NO_LIMIT
-							THERMAL_NO_LIMIT>,
-								 <&cpu2
-							THERMAL_NO_LIMIT
-							THERMAL_NO_LIMIT>,
-								 <&cpu3
-							THERMAL_NO_LIMIT
-							THERMAL_NO_LIMIT>;
-						contribution = <3072>;
-					};
-					map1 {
-						trip = <&target>;
-						cooling-device = <&cpu4
-							THERMAL_NO_LIMIT
-							THERMAL_NO_LIMIT>,
-								 <&cpu5
-							THERMAL_NO_LIMIT
-							THERMAL_NO_LIMIT>,
-								 <&cpu6
-							THERMAL_NO_LIMIT
-							THERMAL_NO_LIMIT>,
-								 <&cpu7
-							THERMAL_NO_LIMIT
-							THERMAL_NO_LIMIT>;
-						contribution = <1024>;
-					};
-				};
-			};
-
-			/* The tzts1 ~ tzts6 don't need to polling */
-			/* The tzts1 ~ tzts6 don't need to thermal throttle */
-
-			tzts1: tzts1 {
-				polling-delay-passive = <0>;
-				polling-delay = <0>;
-				thermal-sensors = <&thermal 1>;
-				sustainable-power = <5000>;
-				trips {};
-				cooling-maps {};
-			};
-
-			tzts2: tzts2 {
-				polling-delay-passive = <0>;
-				polling-delay = <0>;
-				thermal-sensors = <&thermal 2>;
-				sustainable-power = <5000>;
-				trips {};
-				cooling-maps {};
-			};
-
-			tzts3: tzts3 {
-				polling-delay-passive = <0>;
-				polling-delay = <0>;
-				thermal-sensors = <&thermal 3>;
-				sustainable-power = <5000>;
-				trips {};
-				cooling-maps {};
-			};
-
-			tzts4: tzts4 {
-				polling-delay-passive = <0>;
-				polling-delay = <0>;
-				thermal-sensors = <&thermal 4>;
-				sustainable-power = <5000>;
-				trips {};
-				cooling-maps {};
-			};
-
-			tzts5: tzts5 {
-				polling-delay-passive = <0>;
-				polling-delay = <0>;
-				thermal-sensors = <&thermal 5>;
-				sustainable-power = <5000>;
-				trips {};
-				cooling-maps {};
-			};
-
-			tztsABB: tztsABB {
-				polling-delay-passive = <0>;
-				polling-delay = <0>;
-				thermal-sensors = <&thermal 6>;
-				sustainable-power = <5000>;
-				trips {};
-				cooling-maps {};
-			};
-		};
-
 		pwm0: pwm@1100e000 {
 			compatible = "mediatek,mt8183-disp-pwm";
 			reg = <0 0x1100e000 0 0x1000>;
···
 				 <&mmsys CLK_MM_GALS_IPU12MM>;
 			clock-names = "apb", "smi", "gals";
 			power-domains = <&spm MT8183_POWER_DOMAIN_CAM>;
+		};
+	};
+
+	thermal_zones: thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <500>;
+			thermal-sensors = <&thermal 0>;
+			sustainable-power = <5000>;
+
+			trips {
+				threshold: trip-point0 {
+					temperature = <68000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				target: trip-point1 {
+					temperature = <80000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_crit: cpu-crit {
+					temperature = <115000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&target>;
+					cooling-device = <&cpu0
+						THERMAL_NO_LIMIT
+						THERMAL_NO_LIMIT>,
+							 <&cpu1
+						THERMAL_NO_LIMIT
+						THERMAL_NO_LIMIT>,
+							 <&cpu2
+						THERMAL_NO_LIMIT
+						THERMAL_NO_LIMIT>,
+							 <&cpu3
+						THERMAL_NO_LIMIT
+						THERMAL_NO_LIMIT>;
+					contribution = <3072>;
+				};
+				map1 {
+					trip = <&target>;
+					cooling-device = <&cpu4
+						THERMAL_NO_LIMIT
+						THERMAL_NO_LIMIT>,
+							 <&cpu5
+						THERMAL_NO_LIMIT
+						THERMAL_NO_LIMIT>,
+							 <&cpu6
+						THERMAL_NO_LIMIT
+						THERMAL_NO_LIMIT>,
+							 <&cpu7
+						THERMAL_NO_LIMIT
+						THERMAL_NO_LIMIT>;
+					contribution = <1024>;
+				};
+			};
+		};
+
+		/* The tzts1 ~ tzts6 don't need to polling */
+		/* The tzts1 ~ tzts6 don't need to thermal throttle */
+
+		tzts1: tzts1 {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&thermal 1>;
+			sustainable-power = <5000>;
+			trips {};
+			cooling-maps {};
+		};
+
+		tzts2: tzts2 {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&thermal 2>;
+			sustainable-power = <5000>;
+			trips {};
+			cooling-maps {};
+		};
+
+		tzts3: tzts3 {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&thermal 3>;
+			sustainable-power = <5000>;
+			trips {};
+			cooling-maps {};
+		};
+
+		tzts4: tzts4 {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&thermal 4>;
+			sustainable-power = <5000>;
+			trips {};
+			cooling-maps {};
+		};
+
+		tzts5: tzts5 {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&thermal 5>;
+			sustainable-power = <5000>;
+			trips {};
+			cooling-maps {};
+		};
+
+		tztsABB: tztsABB {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&thermal 6>;
+			sustainable-power = <5000>;
+			trips {};
+			cooling-maps {};
 		};
 	};
 };

arch/arm64/boot/dts/mediatek/mt8186.dtsi

···
 					reg = <MT8186_POWER_DOMAIN_CSIRX_TOP>;
 					clocks = <&topckgen CLK_TOP_SENINF>,
 						 <&topckgen CLK_TOP_SENINF1>;
-					clock-names = "csirx_top0", "csirx_top1";
+					clock-names = "subsys-csirx-top0",
+						      "subsys-csirx-top1";
 					#power-domain-cells = <0>;
 				};
 
···
 					reg = <MT8186_POWER_DOMAIN_ADSP_AO>;
 					clocks = <&topckgen CLK_TOP_AUDIODSP>,
 						 <&topckgen CLK_TOP_ADSP_BUS>;
-					clock-names = "audioadsp", "adsp_bus";
+					clock-names = "audioadsp",
+						      "subsys-adsp-bus";
 					#address-cells = <1>;
 					#size-cells = <0>;
 					#power-domain-cells = <1>;
···
 						 <&mmsys CLK_MM_SMI_COMMON>,
 						 <&mmsys CLK_MM_SMI_GALS>,
 						 <&mmsys CLK_MM_SMI_IOMMU>;
-					clock-names = "disp", "mdp", "smi_infra", "smi_common",
-						     "smi_gals", "smi_iommu";
+					clock-names = "disp", "mdp",
+						      "subsys-smi-infra",
+						      "subsys-smi-common",
+						      "subsys-smi-gals",
+						      "subsys-smi-iommu";
 					mediatek,infracfg = <&infracfg_ao>;
 					#address-cells = <1>;
 					#size-cells = <0>;
···
 
 					power-domain@MT8186_POWER_DOMAIN_CAM {
 						reg = <MT8186_POWER_DOMAIN_CAM>;
-						clocks = <&topckgen CLK_TOP_CAM>,
-							 <&topckgen CLK_TOP_SENINF>,
+						clocks = <&topckgen CLK_TOP_SENINF>,
 							 <&topckgen CLK_TOP_SENINF1>,
 							 <&topckgen CLK_TOP_SENINF2>,
 							 <&topckgen CLK_TOP_SENINF3>,
+							 <&camsys CLK_CAM2MM_GALS>,
 							 <&topckgen CLK_TOP_CAMTM>,
-							 <&camsys CLK_CAM2MM_GALS>;
-						clock-names = "cam-top", "cam0", "cam1", "cam2",
-							     "cam3", "cam-tm", "gals";
+							 <&topckgen CLK_TOP_CAM>;
+						clock-names = "cam0", "cam1", "cam2",
+							      "cam3", "gals",
+							      "subsys-cam-tm",
+							      "subsys-cam-top";
 						mediatek,infracfg = <&infracfg_ao>;
 						#address-cells = <1>;
 						#size-cells = <0>;
···
 
 					power-domain@MT8186_POWER_DOMAIN_IMG {
 						reg = <MT8186_POWER_DOMAIN_IMG>;
-						clocks = <&topckgen CLK_TOP_IMG1>,
-							 <&imgsys1 CLK_IMG1_GALS_IMG1>;
-						clock-names = "img-top", "gals";
+						clocks = <&imgsys1 CLK_IMG1_GALS_IMG1>,
+							 <&topckgen CLK_TOP_IMG1>;
+						clock-names = "gals", "subsys-img-top";
 						mediatek,infracfg = <&infracfg_ao>;
 						#address-cells = <1>;
 						#size-cells = <0>;
···
 							 <&ipesys CLK_IPE_LARB20>,
 							 <&ipesys CLK_IPE_SMI_SUBCOM>,
 							 <&ipesys CLK_IPE_GALS_IPE>;
-						clock-names = "ipe-top", "ipe-larb0", "ipe-larb1",
-							      "ipe-smi", "ipe-gals";
+						clock-names = "subsys-ipe-top",
+							      "subsys-ipe-larb0",
+							      "subsys-ipe-larb1",
+							      "subsys-ipe-smi",
+							      "subsys-ipe-gals";
 						mediatek,infracfg = <&infracfg_ao>;
 						#power-domain-cells = <0>;
 					};
···
 						clocks = <&topckgen CLK_TOP_WPE>,
 							 <&wpesys CLK_WPE_SMI_LARB8_CK_EN>,
 							 <&wpesys CLK_WPE_SMI_LARB8_PCLK_EN>;
-						clock-names = "wpe0", "larb-ck", "larb-pclk";
+						clock-names = "wpe0",
+							      "subsys-larb-ck",
+							      "subsys-larb-pclk";
 						mediatek,infracfg = <&infracfg_ao>;
 						#power-domain-cells = <0>;
 					};
···
 			#address-cells = <1>;
 			#size-cells = <1>;
 
-			gpu_speedbin: gpu-speed-bin@59c {
+			gpu_speedbin: gpu-speedbin@59c {
 				reg = <0x59c 0x4>;
 				bits = <0 3>;
 			};

arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi

···
 	pinctrl-0 = <&i2c7_pins>;
 
 	pmic@34 {
-		#interrupt-cells = <1>;
+		#interrupt-cells = <2>;
 		compatible = "mediatek,mt6360";
 		reg = <0x34>;
 		interrupt-controller;

arch/arm64/boot/dts/mediatek/mt8195.dtsi

···
 
 					power-domain@MT8195_POWER_DOMAIN_VENC_CORE1 {
 						reg = <MT8195_POWER_DOMAIN_VENC_CORE1>;
+						clocks = <&vencsys_core1 CLK_VENC_CORE1_LARB>;
+						clock-names = "venc1-larb";
 						mediatek,infracfg = <&infracfg_ao>;
 						#power-domain-cells = <0>;
 					};
···
 
 						power-domain@MT8195_POWER_DOMAIN_VENC {
 							reg = <MT8195_POWER_DOMAIN_VENC>;
+							clocks = <&vencsys CLK_VENC_LARB>;
+							clock-names = "venc0-larb";
 							mediatek,infracfg = <&infracfg_ao>;
 							#power-domain-cells = <0>;
 						};
···
 			reg = <0 0x1b010000 0 0x1000>;
 			mediatek,larb-id = <20>;
 			mediatek,smi = <&smi_common_vpp>;
-			clocks = <&vencsys_core1 CLK_VENC_CORE1_LARB>,
+			clocks = <&vencsys_core1 CLK_VENC_CORE1_VENC>,
 				 <&vencsys_core1 CLK_VENC_CORE1_GALS>,
 				 <&vppsys0 CLK_VPP0_GALS_VDO0_VDO1_VENCSYS_CORE1>;
 			clock-names = "apb", "smi", "gals";

arch/arm64/boot/dts/rockchip/px30-ringneck-haikou.dts

···
 	sgtl5000_clk: sgtl5000-oscillator {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
-		clock-frequency  = <24576000>;
+		clock-frequency = <24576000>;
 	};
 
 	dc_12v: dc-12v-regulator {

arch/arm64/boot/dts/rockchip/rk3328.dtsi

···
 
 	vdec: video-codec@ff360000 {
 		compatible = "rockchip,rk3328-vdec", "rockchip,rk3399-vdec";
-		reg = <0x0 0xff360000 0x0 0x400>;
+		reg = <0x0 0xff360000 0x0 0x480>;
 		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru ACLK_RKVDEC>, <&cru HCLK_RKVDEC>,
 			 <&cru SCLK_VDEC_CABAC>, <&cru SCLK_VDEC_CORE>;

arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi

···
 &pci_rootport {
 	mvl_wifi: wifi@0,0 {
 		compatible = "pci1b4b,2b42";
-		reg = <0x83010000 0x0 0x00000000 0x0 0x00100000
-		       0x83010000 0x0 0x00100000 0x0 0x00100000>;
+		reg = <0x0000 0x0 0x0 0x0 0x0>;
 		interrupt-parent = <&gpio0>;
 		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
 		pinctrl-names = "default";

arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet-dumo.dts

···
 &pci_rootport {
 	wifi@0,0 {
 		compatible = "qcom,ath10k";
-		reg = <0x00010000 0x0 0x00000000 0x0 0x00000000>,
-		      <0x03010010 0x0 0x00000000 0x0 0x00200000>;
+		reg = <0x00000000 0x0 0x00000000 0x0 0x00000000>,
+		      <0x03000010 0x0 0x00000000 0x0 0x00200000>;
 		qcom,ath10k-calibration-variant = "GO_DUMO";
 	};
 };

arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi

···
 		#address-cells = <3>;
 		#size-cells = <2>;
 		ranges;
+		device_type = "pci";
 	};
 };
 

arch/arm64/boot/dts/rockchip/rk3399.dtsi

···
 			power-domain@RK3399_PD_VDU {
 				reg = <RK3399_PD_VDU>;
 				clocks = <&cru ACLK_VDU>,
-					 <&cru HCLK_VDU>;
+					 <&cru HCLK_VDU>,
+					 <&cru SCLK_VDU_CA>,
+					 <&cru SCLK_VDU_CORE>;
 				pm_qos = <&qos_video_m1_r>,
 					 <&qos_video_m1_w>;
 				#power-domain-cells = <0>;
···
 
 	vdec: video-codec@ff660000 {
 		compatible = "rockchip,rk3399-vdec";
-		reg = <0x0 0xff660000 0x0 0x400>;
+		reg = <0x0 0xff660000 0x0 0x480>;
 		interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH 0>;
 		clocks = <&cru ACLK_VDU>, <&cru HCLK_VDU>,
 			 <&cru SCLK_VDU_CA>, <&cru SCLK_VDU_CORE>;

arch/arm64/boot/dts/rockchip/rk356x.dtsi

···
 			     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "sys", "pmc", "msi", "legacy", "err";
+		interrupt-names = "sys", "pmc", "msg", "legacy", "err";
 		bus-range = <0x0 0xf>;
 		clocks = <&cru ACLK_PCIE20_MST>, <&cru ACLK_PCIE20_SLV>,
 			 <&cru ACLK_PCIE20_DBI>, <&cru PCLK_PCIE20>,

arch/arm64/boot/dts/rockchip/rk3588-turing-rk1.dtsi

···
 &pinctrl {
 	fan {
 		fan_int: fan-int {
-			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
+			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};
 
 	hym8563 {
 		hym8563_int: hym8563-int {
-			rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+			rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};
 

arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dts

···
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
-		pinctrl-0 =<&leds_gpio>;
+		pinctrl-0 = <&leds_gpio>;
 
 		led-1 {
 			gpios = <&gpio1 RK_PA2 GPIO_ACTIVE_HIGH>;

arch/arm64/boot/dts/rockchip/rk3588s-pinctrl.dtsi

···
 		emmc_data_strobe: emmc-data-strobe {
 			rockchip,pins =
 				/* emmc_data_strobe */
-				<2 RK_PA2 1 &pcfg_pull_none>;
+				<2 RK_PA2 1 &pcfg_pull_down>;
 		};
 	};
 

arch/arm64/boot/dts/rockchip/rk3588s.dtsi

···
 			     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH 0>,
 			     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH 0>,
 			     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH 0>;
-		interrupt-names = "ch0", "ch1", "ch2", "ch3";
 		rockchip,pmu = <&pmu1grf>;
 	};
 

arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dts

···
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/leds/common.h>
 
-/* Clock frequency (in Hz) of the rtcclk */
-#define RTCCLK_FREQ		1000000
-
 / {
 	model = "Microchip PolarFire-SoC Icicle Kit";
 	compatible = "microchip,mpfs-icicle-reference-rtlv2210", "microchip,mpfs-icicle-kit",
···
 
 	chosen {
 		stdout-path = "serial1:115200n8";
-	};
-
-	cpus {
-		timebase-frequency = <RTCCLK_FREQ>;
 	};
 
 	leds {

arch/riscv/boot/dts/microchip/mpfs-m100pfsevp.dts

···
 #include "mpfs.dtsi"
 #include "mpfs-m100pfs-fabric.dtsi"
 
-/* Clock frequency (in Hz) of the rtcclk */
-#define MTIMER_FREQ	1000000
-
 / {
 	model = "Aries Embedded M100PFEVPS";
 	compatible = "aries,m100pfsevp", "microchip,mpfs";
···
 
 	chosen {
 		stdout-path = "serial1:115200n8";
-	};
-
-	cpus {
-		timebase-frequency = <MTIMER_FREQ>;
 	};
 
 	ddrc_cache_lo: memory@80000000 {

arch/riscv/boot/dts/microchip/mpfs-polarberry.dts

···
 #include "mpfs.dtsi"
 #include "mpfs-polarberry-fabric.dtsi"
 
-/* Clock frequency (in Hz) of the rtcclk */
-#define MTIMER_FREQ	1000000
-
 / {
 	model = "Sundance PolarBerry";
 	compatible = "sundance,polarberry", "microchip,mpfs";
···
 
 	chosen {
 		stdout-path = "serial0:115200n8";
-	};
-
-	cpus {
-		timebase-frequency = <MTIMER_FREQ>;
 	};
 
 	ddrc_cache_lo: memory@80000000 {

arch/riscv/boot/dts/microchip/mpfs-sev-kit.dts

···
 #include "mpfs.dtsi"
 #include "mpfs-sev-kit-fabric.dtsi"
 
-/* Clock frequency (in Hz) of the rtcclk */
-#define MTIMER_FREQ		1000000
-
 / {
 	#address-cells = <2>;
 	#size-cells = <2>;
···
 
 	chosen {
 		stdout-path = "serial1:115200n8";
-	};
-
-	cpus {
-		timebase-frequency = <MTIMER_FREQ>;
 	};
 
 	reserved-memory {

arch/riscv/boot/dts/microchip/mpfs-tysom-m.dts

···
 #include "mpfs.dtsi"
 #include "mpfs-tysom-m-fabric.dtsi"
 
-/* Clock frequency (in Hz) of the rtcclk */
-#define MTIMER_FREQ		1000000
-
 / {
 	model = "Aldec TySOM-M-MPFS250T-REV2";
 	compatible = "aldec,tysom-m-mpfs250t-rev2", "microchip,mpfs";
···
 
 	chosen {
 		stdout-path = "serial1:115200n8";
-	};
-
-	cpus {
-		timebase-frequency = <MTIMER_FREQ>;
 	};
 
 	ddrc_cache_lo: memory@80000000 {

arch/riscv/boot/dts/microchip/mpfs.dtsi

···
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
+		timebase-frequency = <1000000>;
 
 		cpu0: cpu@0 {
 			compatible = "sifive,e51", "sifive,rocket0", "riscv";

arch/riscv/boot/dts/sophgo/cv1800b.dtsi

···
 			cpu0_intc: interrupt-controller {
 				compatible = "riscv,cpu-intc";
 				interrupt-controller;
-				#address-cells = <0>;
 				#interrupt-cells = <1>;
 			};
 		};

drivers/firmware/arm_ffa/driver.c

···
 	void *tx_buffer;
 	bool mem_ops_native;
 	bool bitmap_created;
+	bool notif_enabled;
 	unsigned int sched_recv_irq;
 	unsigned int cpuhp_state;
 	struct ffa_pcpu_irq __percpu *irq_pcpu;
···
 			if (ids_processed >= max_ids - 1)
 				break;
 
-			part_id = packed_id_list[++ids_processed];
+			part_id = packed_id_list[ids_processed++];
 
 			if (!ids_count[list]) { /* Global Notification */
 				__do_sched_recv_cb(part_id, 0, false);
···
 				if (ids_processed >= max_ids - 1)
 					break;
 
-				vcpu_id = packed_id_list[++ids_processed];
+				vcpu_id = packed_id_list[ids_processed++];
 
 				__do_sched_recv_cb(part_id, vcpu_id, true);
 			}
···
 
 #define FFA_SECURE_PARTITION_ID_FLAG	BIT(15)
 
+#define ffa_notifications_disabled()	(!drv_info->notif_enabled)
+
 enum notify_type {
 	NON_SECURE_VM,
 	SECURE_PARTITION,
···
 {
 	struct ffa_dev_part_info *partition;
 	bool cb_valid;
+
+	if (ffa_notifications_disabled())
+		return -EOPNOTSUPP;
 
 	partition = xa_load(&drv_info->partition_info, part_id);
 	write_lock(&partition->rw_lock);
···
 	int rc;
 	enum notify_type type = ffa_notify_type_get(dev->vm_id);
 
+	if (ffa_notifications_disabled())
+		return -EOPNOTSUPP;
+
 	if (notify_id >= FFA_MAX_NOTIFICATIONS)
 		return -EINVAL;
 
···
 	int rc;
 	u32 flags = 0;
 	enum notify_type type = ffa_notify_type_get(dev->vm_id);
+
+	if (ffa_notifications_disabled())
+		return -EOPNOTSUPP;
 
 	if (notify_id >= FFA_MAX_NOTIFICATIONS)
 		return -EINVAL;
···
 			   bool is_per_vcpu, u16 vcpu)
 {
 	u32 flags = 0;
+
+	if (ffa_notifications_disabled())
+		return -EOPNOTSUPP;
 
 	if (is_per_vcpu)
 		flags |= (PER_VCPU_NOTIFICATION_FLAG | vcpu << 16);
···
 	if (!count)
 		return;
 
-	info = kcalloc(count, sizeof(**info), GFP_KERNEL);
+	info = kcalloc(count, sizeof(*info), GFP_KERNEL);
 	if (!info)
 		return;
 
···
 
 static void ffa_sched_recv_irq_unmap(void)
 {
-	if (drv_info->sched_recv_irq)
+	if (drv_info->sched_recv_irq) {
 		irq_dispose_mapping(drv_info->sched_recv_irq);
+		drv_info->sched_recv_irq = 0;
+	}
 }
 
 static int ffa_cpuhp_pcpu_irq_enable(unsigned int cpu)
···
 
 static void ffa_uninit_pcpu_irq(void)
 {
-	if (drv_info->cpuhp_state)
+	if (drv_info->cpuhp_state) {
 		cpuhp_remove_state(drv_info->cpuhp_state);
+		drv_info->cpuhp_state = 0;
+	}
 
-	if (drv_info->notif_pcpu_wq)
+	if (drv_info->notif_pcpu_wq) {
 		destroy_workqueue(drv_info->notif_pcpu_wq);
+		drv_info->notif_pcpu_wq = NULL;
+	}
 
 	if (drv_info->sched_recv_irq)
 		free_percpu_irq(drv_info->sched_recv_irq, drv_info->irq_pcpu);
 
-	if (drv_info->irq_pcpu)
+	if (drv_info->irq_pcpu) {
 		free_percpu(drv_info->irq_pcpu);
+		drv_info->irq_pcpu = NULL;
+	}
 }
 
 static int ffa_init_pcpu_irq(unsigned int irq)
···
 		ffa_notification_bitmap_destroy();
 		drv_info->bitmap_created = false;
 	}
+	drv_info->notif_enabled = false;
 }
 
-static int ffa_notifications_setup(void)
+static void ffa_notifications_setup(void)
 {
 	int ret, irq;
 
 	ret = ffa_features(FFA_NOTIFICATION_BITMAP_CREATE, 0, NULL, NULL);
 	if (ret) {
-		pr_err("Notifications not supported, continuing with it ..\n");
-		return 0;
+		pr_info("Notifications not supported, continuing with it ..\n");
+		return;
 	}
 
 	ret = ffa_notification_bitmap_create();
 	if (ret) {
-		pr_err("notification_bitmap_create error %d\n", ret);
-		return ret;
+		pr_info("Notification bitmap create error %d\n", ret);
+		return;
 	}
 	drv_info->bitmap_created = true;
 
···
 	hash_init(drv_info->notifier_hash);
 	mutex_init(&drv_info->notify_lock);
 
-	/* Register internal scheduling callback */
-	ret = ffa_sched_recv_cb_update(drv_info->vm_id, ffa_self_notif_handle,
-				       drv_info, true);
-	if (!ret)
-		return ret;
+	drv_info->notif_enabled = true;
+	return;
 cleanup:
+	pr_info("Notification setup failed %d, not enabled\n", ret);
 	ffa_notifications_cleanup();
-	return ret;
 }
 
 static int __init ffa_init(void)
···
 	mutex_init(&drv_info->rx_lock);
 	mutex_init(&drv_info->tx_lock);
 
-	ffa_setup_partitions();
-
 	ffa_set_up_mem_ops_native_flag();
 
-	ret = ffa_notifications_setup();
+	ffa_notifications_setup();
+
+	ffa_setup_partitions();
+
+	ret = ffa_sched_recv_cb_update(drv_info->vm_id, ffa_self_notif_handle,
+				       drv_info, true);
 	if (ret)
-		goto partitions_cleanup;
+		pr_info("Failed to register driver sched callback %d\n", ret);
 
 	return 0;
-partitions_cleanup:
-	ffa_partitions_cleanup();
 free_pages:
 	if (drv_info->tx_buffer)
 		free_pages_exact(drv_info->tx_buffer, RXTX_BUFFER_SIZE);

drivers/firmware/arm_scmi/perf.c

···
 	u32 opp_count;
 	u32 sustained_freq_khz;
 	u32 sustained_perf_level;
-	u32 mult_factor;
+	unsigned long mult_factor;
 	struct scmi_perf_domain_info info;
 	struct scmi_opp opp[MAX_OPPS];
 	struct scmi_fc_info *fc_info;
···
 		dom_info->sustained_perf_level =
 					le32_to_cpu(attr->sustained_perf_level);
 		if (!dom_info->sustained_freq_khz ||
-		    !dom_info->sustained_perf_level)
+		    !dom_info->sustained_perf_level ||
+		    dom_info->level_indexing_mode)
 			/* CPUFreq converts to kHz, hence default 1000 */
 			dom_info->mult_factor =	1000;
 		else
 			dom_info->mult_factor =
-					(dom_info->sustained_freq_khz * 1000) /
-					dom_info->sustained_perf_level;
+					(dom_info->sustained_freq_khz * 1000UL)
+					/ dom_info->sustained_perf_level;
 		strscpy(dom_info->info.name, attr->name,
 			SCMI_SHORT_NAME_MAX_SIZE);
 	}
···
 		if (!dom->level_indexing_mode)
 			freq = dom->opp[idx].perf * dom->mult_factor;
 		else
-			freq = dom->opp[idx].indicative_freq * 1000;
+			freq = dom->opp[idx].indicative_freq * dom->mult_factor;
 
 		data.level = dom->opp[idx].perf;
 		data.freq = freq;
···
 	} else {
 		struct scmi_opp *opp;
 
-		opp = LOOKUP_BY_FREQ(dom->opps_by_freq, freq / 1000);
+		opp = LOOKUP_BY_FREQ(dom->opps_by_freq,
+				     freq / dom->mult_factor);
 		if (!opp)
 			return -EIO;
 
···
 		if (!opp)
 			return -EIO;
 
-		*freq = opp->indicative_freq * 1000;
+		*freq = opp->indicative_freq * dom->mult_factor;
 	}
 
 	return ret;
···
 		if (!dom->level_indexing_mode)
 			opp_freq = opp->perf * dom->mult_factor;
 		else
-			opp_freq = opp->indicative_freq * 1000;
+			opp_freq = opp->indicative_freq * dom->mult_factor;
 
 		if (opp_freq < *freq)
 			continue;

drivers/tee/optee/device.c

···
 	kfree(optee_device);
 }
 
-static int optee_register_device(const uuid_t *device_uuid)
+static ssize_t need_supplicant_show(struct device *dev,
+				    struct device_attribute *attr,
+				    char *buf)
+{
+	return 0;
+}
+
+static DEVICE_ATTR_RO(need_supplicant);
+
+static int optee_register_device(const uuid_t *device_uuid, u32 func)
 {
 	struct tee_client_device *optee_device = NULL;
 	int rc;
···
 		pr_err("device registration failed, err: %d\n", rc);
 		put_device(&optee_device->dev);
 	}
+
+	if (func == PTA_CMD_GET_DEVICES_SUPP)
+		device_create_file(&optee_device->dev,
+				   &dev_attr_need_supplicant);
 
 	return rc;
 }
···
 	num_devices = shm_size / sizeof(uuid_t);
 
 	for (idx = 0; idx < num_devices; idx++) {
-		rc = optee_register_device(&device_uuid[idx]);
+		rc = optee_register_device(&device_uuid[idx], func);
 		if (rc)
 			goto out_shm;
 	}

include/linux/arm_ffa.h

···
 #define module_ffa_driver(__ffa_driver)	\
 	module_driver(__ffa_driver, ffa_register, ffa_unregister)
 
+extern struct bus_type ffa_bus_type;
+
 /* FFA transport related */
 struct ffa_partition_info {
 	u16 id;