Merge branch 'linux_next' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/i7core

* 'linux_next' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/i7core: (83 commits)
i7core_edac: Better describe the supported devices
Add support for Westmere to i7core_edac driver
i7core_edac: don't free on success
i7core_edac: Add support for X5670
Always call i7core_[ur]dimm_check_mc_ecc_err
i7core_edac: fix memory leak of i7core_dev
EDAC: add __init to i7core_xeon_pci_fixup
i7core_edac: Fix wrong device id for channel 1 devices
i7core: add support for Lynnfield alternate address
i7core_edac: Add initial support for Lynnfield
i7core_edac: do not export static functions
edac: fix i7core build
edac: i7core_edac produces undefined behaviour on 32bit
i7core_edac: Use a more generic approach for probing PCI devices
i7core_edac: PCI device is called NONCORE, instead of NOCORE
i7core_edac: Fix ringbuffer maxsize
i7core_edac: First store, then increment
i7core_edac: Better parse "any" addrmask
i7core_edac: Use a lockless ringbuffer
edac: Create an unique instance for each kobj
...

Documentation/edac.txt

···
 7 Dec 2005
 17 Jul 2007	Updated
 
+(c) Mauro Carvalho Chehab <[e-mail]>
+05 Aug 2009	Nehalem interface
 
 EDAC is maintained and written by:
 
···
 The 'test_device_edac' sample driver is located at the
 bluesmoke.sourceforge.net project site for EDAC.
 
+=======================================================================
+NEHALEM USAGE OF EDAC APIs
+
+This chapter documents some EXPERIMENTAL mappings for EDAC API to handle
+Nehalem EDAC driver. They will likely be changed on future versions
+of the driver.
+
+Due to the way Nehalem exports Memory Controller data, some adjustments
+were done at i7core_edac driver. This chapter will cover those differences
+
+1) On Nehalem, there are one Memory Controller per Quick Patch Interconnect
+   (QPI). At the driver, the term "socket" means one QPI. This is
+   associated with a physical CPU socket.
+
+   Each MC have 3 physical read channels, 3 physical write channels and
+   3 logic channels. The driver currenty sees it as just 3 channels.
+   Each channel can have up to 3 DIMMs.
+
+   The minimum known unity is DIMMs. There are no information about csrows.
+   As EDAC API maps the minimum unity is csrows, the driver sequencially
+   maps channel/dimm into different csrows.
+
+   For example, suposing the following layout:
+	Ch0 phy rd0, wr0 (0x063f4031): 2 ranks, UDIMMs
+	  dimm 0 1024 Mb offset: 0, bank: 8, rank: 1, row: 0x4000, col: 0x400
+	  dimm 1 1024 Mb offset: 4, bank: 8, rank: 1, row: 0x4000, col: 0x400
+        Ch1 phy rd1, wr1 (0x063f4031): 2 ranks, UDIMMs
+	  dimm 0 1024 Mb offset: 0, bank: 8, rank: 1, row: 0x4000, col: 0x400
+	Ch2 phy rd3, wr3 (0x063f4031): 2 ranks, UDIMMs
+	  dimm 0 1024 Mb offset: 0, bank: 8, rank: 1, row: 0x4000, col: 0x400
+   The driver will map it as:
+	csrow0: channel 0, dimm0
+	csrow1: channel 0, dimm1
+	csrow2: channel 1, dimm0
+	csrow3: channel 2, dimm0
+
+exports one
+   DIMM per csrow.
+
+   Each QPI is exported as a different memory controller.
+
+2) Nehalem MC has the hability to generate errors. The driver implements this
+   functionality via some error injection nodes:
+
+   For injecting a memory error, there are some sysfs nodes, under
+   /sys/devices/system/edac/mc/mc?/:
+
+   inject_addrmatch/*:
+      Controls the error injection mask register. It is possible to specify
+      several characteristics of the address to match an error code:
+         dimm = the affected dimm. Numbers are relative to a channel;
+         rank = the memory rank;
+         channel = the channel that will generate an error;
+         bank = the affected bank;
+         page = the page address;
+         column (or col) = the address column.
+      each of the above values can be set to "any" to match any valid value.
+
+      At driver init, all values are set to any.
+
+      For example, to generate an error at rank 1 of dimm 2, for any channel,
+      any bank, any page, any column:
+		echo 2 >/sys/devices/system/edac/mc/mc0/inject_addrmatch/dimm
+		echo 1 >/sys/devices/system/edac/mc/mc0/inject_addrmatch/rank
+
+	To return to the default behaviour of matching any, you can do:
+		echo any >/sys/devices/system/edac/mc/mc0/inject_addrmatch/dimm
+		echo any >/sys/devices/system/edac/mc/mc0/inject_addrmatch/rank
+
+   inject_eccmask:
+       specifies what bits will have troubles,
+
+   inject_section:
+       specifies what ECC cache section will get the error:
+		3 for both
+		2 for the highest
+		1 for the lowest
+
+   inject_type:
+       specifies the type of error, being a combination of the following bits:
+		bit 0 - repeat
+		bit 1 - ecc
+		bit 2 - parity
+
+       inject_enable starts the error generation when something different
+       than 0 is written.
+
+   All inject vars can be read. root permission is needed for write.
+
+   Datasheet states that the error will only be generated after a write on an
+   address that matches inject_addrmatch. It seems, however, that reading will
+   also produce an error.
+
+   For example, the following code will generate an error for any write access
+   at socket 0, on any DIMM/address on channel 2:
+
+   echo 2 >/sys/devices/system/edac/mc/mc0/inject_addrmatch/channel
+   echo 2 >/sys/devices/system/edac/mc/mc0/inject_type
+   echo 64 >/sys/devices/system/edac/mc/mc0/inject_eccmask
+   echo 3 >/sys/devices/system/edac/mc/mc0/inject_section
+   echo 1 >/sys/devices/system/edac/mc/mc0/inject_enable
+   dd if=/dev/mem of=/dev/null seek=16k bs=4k count=1 >& /dev/null
+
+   For socket 1, it is needed to replace "mc0" by "mc1" at the above
+   commands.
+
+   The generated error message will look like:
+
+   EDAC MC0: UE row 0, channel-a= 0 channel-b= 0 labels "-": NON_FATAL (addr = 0x0075b980, socket=0, Dimm=0, Channel=2, syndrome=0x00000040, count=1, Err=8c0000400001009f:4000080482 (read error: read ECC error))
+
+3) Nehalem specific Corrected Error memory counters
+
+   Nehalem have some registers to count memory errors. The driver uses those
+   registers to report Corrected Errors on devices with Registered Dimms.
+
+   However, those counters don't work with Unregistered Dimms. As the chipset
+   offers some counters that also work with UDIMMS (but with a worse level of
+   granularity than the default ones), the driver exposes those registers for
+   UDIMM memories.
+
+   They can be read by looking at the contents of all_channel_counts/
+
+   $ for i in /sys/devices/system/edac/mc/mc0/all_channel_counts/*; do echo $i; cat $i; done
+	/sys/devices/system/edac/mc/mc0/all_channel_counts/udimm0
+	0
+	/sys/devices/system/edac/mc/mc0/all_channel_counts/udimm1
+	0
+	/sys/devices/system/edac/mc/mc0/all_channel_counts/udimm2
+	0
+
+   What happens here is that errors on different csrows, but at the same
+   dimm number will increment the same counter.
+   So, in this memory mapping:
+	csrow0: channel 0, dimm0
+	csrow1: channel 0, dimm1
+	csrow2: channel 1, dimm0
+	csrow3: channel 2, dimm0
+   The hardware will increment udimm0 for an error at the first dimm at either
+	csrow0, csrow2  or csrow3;
+   The hardware will increment udimm1 for an error at the second dimm at either
+	csrow0, csrow2  or csrow3;
+   The hardware will increment udimm2 for an error at the third dimm at either
+	csrow0, csrow2  or csrow3;
+
+4) Standard error counters
+
+   The standard error counters are generated when an mcelog error is received
+   by the driver. Since, with udimm, this is counted by software, it is
+   possible that some errors could be lost. With rdimm's, they displays the
+   contents of the registers

arch/x86/include/asm/pci_x86.h

···
 extern struct pci_bus *pci_root_bus;
 extern struct pci_ops pci_root_ops;
 
+void pcibios_scan_specific_bus(int busn);
+
 /* pci-irq.c */
 
 struct irq_info {

arch/x86/kernel/cpu/mcheck/mce.c

···
 #include <linux/fs.h>
 #include <linux/mm.h>
 #include <linux/debugfs.h>
+#include <linux/edac_mce.h>
 
 #include <asm/processor.h>
 #include <asm/hw_irq.h>
···
 	for (;;) {
 		entry = rcu_dereference_check_mce(mcelog.next);
 		for (;;) {
+			/*
+			 * If edac_mce is enabled, it will check the error type
+			 * and will process it, if it is a known error.
+			 * Otherwise, the error will be sent through mcelog
+			 * interface
+			 */
+			if (edac_mce_parse(mce))
+				return;
+
 			/*
 			 * When the buffer fills up discard new entries.
 			 * Assume that the earlier errors are the more

arch/x86/pci/legacy.c

···
  */
 static void __devinit pcibios_fixup_peer_bridges(void)
 {
-	int n, devfn;
-	long node;
+	int n;
 
 	if (pcibios_last_bus <= 0 || pcibios_last_bus > 0xff)
 		return;
 	DBG("PCI: Peer bridge fixup\n");
 
-	for (n=0; n <= pcibios_last_bus; n++) {
-		u32 l;
-		if (pci_find_bus(0, n))
-			continue;
-		node = get_mp_bus_to_node(n);
-		for (devfn = 0; devfn < 256; devfn += 8) {
-			if (!raw_pci_read(0, n, devfn, PCI_VENDOR_ID, 2, &l) &&
-			    l != 0x0000 && l != 0xffff) {
-				DBG("Found device at %02x:%02x [%04x]\n", n, devfn, l);
-				printk(KERN_INFO "PCI: Discovered peer bus %02x\n", n);
-				pci_scan_bus_on_node(n, &pci_root_ops, node);
-				break;
-			}
-		}
-	}
+	for (n=0; n <= pcibios_last_bus; n++)
+		pcibios_scan_specific_bus(n);
 }
 
 int __init pci_legacy_init(void)
···
 
 	return 0;
 }
+
+void pcibios_scan_specific_bus(int busn)
+{
+	int devfn;
+	long node;
+	u32 l;
+
+	if (pci_find_bus(0, busn))
+		return;
+
+	node = get_mp_bus_to_node(busn);
+	for (devfn = 0; devfn < 256; devfn += 8) {
+		if (!raw_pci_read(0, busn, devfn, PCI_VENDOR_ID, 2, &l) &&
+		    l != 0x0000 && l != 0xffff) {
+			DBG("Found device at %02x:%02x [%04x]\n", busn, devfn, l);
+			printk(KERN_INFO "PCI: Discovered peer bus %02x\n", busn);
+			pci_scan_bus_on_node(busn, &pci_root_ops, node);
+			return;
+		}
+	}
+}
+EXPORT_SYMBOL_GPL(pcibios_scan_specific_bus);
 
 int __init pci_subsys_init(void)
 {

drivers/edac/Kconfig

···
 	  occurred so that a particular failing memory module can be
 	  replaced.  If unsure, select 'Y'.
 
+config EDAC_MCE
+	bool
+
 config EDAC_AMD64
 	tristate "AMD64 (Opteron, Athlon64) K8, F10h, F11h"
 	depends on EDAC_MM_EDAC && K8_NB && X86_64 && PCI && EDAC_DECODE_MCE
···
 	help
 	  Support for error detection and correction the Intel
 	  i5400 MCH chipset (Seaburg).
+
+config EDAC_I7CORE
+	tristate "Intel i7 Core (Nehalem) processors"
+	depends on EDAC_MM_EDAC && PCI && X86
+	select EDAC_MCE
+	help
+	  Support for error detection and correction the Intel
+	  i7 Core (Nehalem) Integrated Memory Controller that exists on
+	  newer processors like i7 Core, i7 Core Extreme, Xeon 35xx
+	  and Xeon 55xx processors.
 
 config EDAC_I82860
 	tristate "Intel 82860"

drivers/edac/Makefile

···
 
 obj-$(CONFIG_EDAC)			:= edac_stub.o
 obj-$(CONFIG_EDAC_MM_EDAC)		+= edac_core.o
+obj-$(CONFIG_EDAC_MCE)			+= edac_mce.o
 
 edac_core-objs	:= edac_mc.o edac_device.o edac_mc_sysfs.o edac_pci_sysfs.o
 edac_core-objs	+= edac_module.o edac_device_sysfs.o
···
 obj-$(CONFIG_EDAC_I5000)		+= i5000_edac.o
 obj-$(CONFIG_EDAC_I5100)		+= i5100_edac.o
 obj-$(CONFIG_EDAC_I5400)		+= i5400_edac.o
+obj-$(CONFIG_EDAC_I7CORE)		+= i7core_edac.o
 obj-$(CONFIG_EDAC_E7XXX)		+= e7xxx_edac.o
 obj-$(CONFIG_EDAC_E752X)		+= e752x_edac.o
 obj-$(CONFIG_EDAC_I82443BXGX)		+= i82443bxgx_edac.o

drivers/edac/edac_core.h

···
 	struct channel_info *channels;
 };
 
+struct mcidev_sysfs_group {
+	const char *name;				/* group name */
+	struct mcidev_sysfs_attribute *mcidev_attr;	/* group attributes */
+};
+
+struct mcidev_sysfs_group_kobj {
+	struct list_head list;		/* list for all instances within a mc */
+
+	struct kobject kobj;		/* kobj for the group */
+
+	struct mcidev_sysfs_group *grp;	/* group description table */
+	struct mem_ctl_info *mci;	/* the parent */
+};
+
 /* mcidev_sysfs_attribute structure
  *	used for driver sysfs attributes and in mem_ctl_info
  * 	sysfs top level entries
  */
 struct mcidev_sysfs_attribute {
-        struct attribute attr;
+	/* It should use either attr or grp */
+	struct attribute attr;
+	struct mcidev_sysfs_group *grp;	/* Points to a group of attributes */
+
+	/* Ops for show/store values at the attribute - not used on group */
         ssize_t (*show)(struct mem_ctl_info *,char *);
         ssize_t (*store)(struct mem_ctl_info *, const char *,size_t);
 };
···
 
 	/* edac sysfs device control */
 	struct kobject edac_mci_kobj;
+
+	/* list for all grp instances within a mc */
+	struct list_head grp_kobj_list;
 
 	/* Additional top controller level attributes, but specified
 	 * by the low level driver.

drivers/edac/edac_mc_sysfs.c

···
 	struct mem_ctl_info *mem_ctl_info = to_mci(kobj);
 	struct mcidev_sysfs_attribute *mcidev_attr = to_mcidev_attr(attr);
 
+	debugf1("%s() mem_ctl_info %p\n", __func__, mem_ctl_info);
+
 	if (mcidev_attr->show)
 		return mcidev_attr->show(mem_ctl_info, buffer);
 
···
 {
 	struct mem_ctl_info *mem_ctl_info = to_mci(kobj);
 	struct mcidev_sysfs_attribute *mcidev_attr = to_mcidev_attr(attr);
+
+	debugf1("%s() mem_ctl_info %p\n", __func__, mem_ctl_info);
 
 	if (mcidev_attr->store)
 		return mcidev_attr->store(mem_ctl_info, buffer, count);
···
 
 #define EDAC_DEVICE_SYMLINK	"device"
 
+#define grp_to_mci(k) (container_of(k, struct mcidev_sysfs_group_kobj, kobj)->mci)
+
+/* MCI show/store functions for top most object */
+static ssize_t inst_grp_show(struct kobject *kobj, struct attribute *attr,
+			char *buffer)
+{
+	struct mem_ctl_info *mem_ctl_info = grp_to_mci(kobj);
+	struct mcidev_sysfs_attribute *mcidev_attr = to_mcidev_attr(attr);
+
+	debugf1("%s() mem_ctl_info %p\n", __func__, mem_ctl_info);
+
+	if (mcidev_attr->show)
+		return mcidev_attr->show(mem_ctl_info, buffer);
+
+	return -EIO;
+}
+
+static ssize_t inst_grp_store(struct kobject *kobj, struct attribute *attr,
+			const char *buffer, size_t count)
+{
+	struct mem_ctl_info *mem_ctl_info = grp_to_mci(kobj);
+	struct mcidev_sysfs_attribute *mcidev_attr = to_mcidev_attr(attr);
+
+	debugf1("%s() mem_ctl_info %p\n", __func__, mem_ctl_info);
+
+	if (mcidev_attr->store)
+		return mcidev_attr->store(mem_ctl_info, buffer, count);
+
+	return -EIO;
+}
+
+/* No memory to release for this kobj */
+static void edac_inst_grp_release(struct kobject *kobj)
+{
+	struct mcidev_sysfs_group_kobj *grp;
+	struct mem_ctl_info *mci;
+
+	debugf1("%s()\n", __func__);
+
+	grp = container_of(kobj, struct mcidev_sysfs_group_kobj, kobj);
+	mci = grp->mci;
+
+	kobject_put(&mci->edac_mci_kobj);
+}
+
+/* Intermediate show/store table */
+static struct sysfs_ops inst_grp_ops = {
+	.show = inst_grp_show,
+	.store = inst_grp_store
+};
+
+/* the kobj_type instance for a instance group */
+static struct kobj_type ktype_inst_grp = {
+	.release = edac_inst_grp_release,
+	.sysfs_ops = &inst_grp_ops,
+};
+
+
 /*
  * edac_create_mci_instance_attributes
- *	create MC driver specific attributes at the topmost level
- *	directory of this mci instance.
+ *	create MC driver specific attributes bellow an specified kobj
+ * This routine calls itself recursively, in order to create an entire
+ * object tree.
  */
-static int edac_create_mci_instance_attributes(struct mem_ctl_info *mci)
+static int edac_create_mci_instance_attributes(struct mem_ctl_info *mci,
+				struct mcidev_sysfs_attribute *sysfs_attrib,
+				struct kobject *kobj)
 {
 	int err;
-	struct mcidev_sysfs_attribute *sysfs_attrib;
 
-	/* point to the start of the array and iterate over it
-	 * adding each attribute listed to this mci instance's kobject
-	 */
-	sysfs_attrib = mci->mc_driver_sysfs_attributes;
+	debugf1("%s()\n", __func__);
 
-	while (sysfs_attrib && sysfs_attrib->attr.name) {
-		err = sysfs_create_file(&mci->edac_mci_kobj,
-					(struct attribute*) sysfs_attrib);
+	while (sysfs_attrib) {
+		if (sysfs_attrib->grp) {
+			struct mcidev_sysfs_group_kobj *grp_kobj;
+
+			grp_kobj = kzalloc(sizeof(*grp_kobj), GFP_KERNEL);
+			if (!grp_kobj)
+				return -ENOMEM;
+
+			list_add_tail(&grp_kobj->list, &mci->grp_kobj_list);
+
+			grp_kobj->grp = sysfs_attrib->grp;
+			grp_kobj->mci = mci;
+
+			debugf0("%s() grp %s, mci %p\n", __func__,
+				sysfs_attrib->grp->name, mci);
+
+			err = kobject_init_and_add(&grp_kobj->kobj,
+						&ktype_inst_grp,
+						&mci->edac_mci_kobj,
+						sysfs_attrib->grp->name);
+			if (err)
+				return err;
+
+			err = edac_create_mci_instance_attributes(mci,
+					grp_kobj->grp->mcidev_attr,
+					&grp_kobj->kobj);
+
+			if (err)
+				return err;
+		} else if (sysfs_attrib->attr.name) {
+			debugf0("%s() file %s\n", __func__,
+				sysfs_attrib->attr.name);
+
+			err = sysfs_create_file(kobj, &sysfs_attrib->attr);
+		} else
+			break;
+
 		if (err) {
 			return err;
 		}
-
 		sysfs_attrib++;
 	}
 
···
  *	remove MC driver specific attributes at the topmost level
  *	directory of this mci instance.
  */
-static void edac_remove_mci_instance_attributes(struct mem_ctl_info *mci)
+static void edac_remove_mci_instance_attributes(struct mem_ctl_info *mci,
+				struct mcidev_sysfs_attribute *sysfs_attrib,
+				struct kobject *kobj, int count)
 {
-	struct mcidev_sysfs_attribute *sysfs_attrib;
+	struct mcidev_sysfs_group_kobj *grp_kobj, *tmp;
 
-	/* point to the start of the array and iterate over it
-	 * adding each attribute listed to this mci instance's kobject
+	debugf1("%s()\n", __func__);
+
+	/*
+	 * loop if there are attributes and until we hit a NULL entry
+	 * Remove first all the atributes
 	 */
-	sysfs_attrib = mci->mc_driver_sysfs_attributes;
-
-	/* loop if there are attributes and until we hit a NULL entry */
-	while (sysfs_attrib && sysfs_attrib->attr.name) {
-		sysfs_remove_file(&mci->edac_mci_kobj,
-					(struct attribute *) sysfs_attrib);
+	while (sysfs_attrib) {
+		if (sysfs_attrib->grp) {
+			list_for_each_entry(grp_kobj, &mci->grp_kobj_list,
+					    list)
+				if (grp_kobj->grp == sysfs_attrib->grp)
+					edac_remove_mci_instance_attributes(mci,
+						    grp_kobj->grp->mcidev_attr,
+						    &grp_kobj->kobj, count + 1);
+		} else if (sysfs_attrib->attr.name) {
+			debugf0("%s() file %s\n", __func__,
+				sysfs_attrib->attr.name);
+			sysfs_remove_file(kobj, &sysfs_attrib->attr);
+		} else
+			break;
 		sysfs_attrib++;
 	}
+
+	/*
+	 * Now that all attributes got removed, it is save to remove all groups
+	 */
+	if (!count)
+		list_for_each_entry_safe(grp_kobj, tmp, &mci->grp_kobj_list,
+					 list) {
+			debugf0("%s() grp %s\n", __func__, grp_kobj->grp->name);
+			kobject_put(&grp_kobj->kobj);
+		}
 }
 
 
···
 
 	debugf0("%s() idx=%d\n", __func__, mci->mc_idx);
 
+	INIT_LIST_HEAD(&mci->grp_kobj_list);
+
 	/* create a symlink for the device */
 	err = sysfs_create_link(kobj_mci, &mci->dev->kobj,
 				EDAC_DEVICE_SYMLINK);
···
 	 * then create them now for the driver.
 	 */
 	if (mci->mc_driver_sysfs_attributes) {
-		err = edac_create_mci_instance_attributes(mci);
+		err = edac_create_mci_instance_attributes(mci,
+					mci->mc_driver_sysfs_attributes,
+					&mci->edac_mci_kobj);
 		if (err) {
 			debugf1("%s() failure to create mci attributes\n",
 				__func__);
···
 	}
 
 	/* remove the mci instance's attributes, if any */
-	edac_remove_mci_instance_attributes(mci);
+	edac_remove_mci_instance_attributes(mci,
+		mci->mc_driver_sysfs_attributes, &mci->edac_mci_kobj, 0);
 
 	/* remove the symlink */
 	sysfs_remove_link(kobj_mci, EDAC_DEVICE_SYMLINK);
···
 	debugf0("%s()  remove_mci_instance\n", __func__);
 
 	/* remove this mci instance's attribtes */
-	edac_remove_mci_instance_attributes(mci);
-
+	edac_remove_mci_instance_attributes(mci,
+					    mci->mc_driver_sysfs_attributes,
+					    &mci->edac_mci_kobj, 0);
 	debugf0("%s()  unregister this mci kobj\n", __func__);
 
 	/* unregister this instance's kobject */

drivers/edac/edac_mce.c

···
+/* Provides edac interface to mcelog events
+ *
+ * This file may be distributed under the terms of the
+ * GNU General Public License version 2.
+ *
+ * Copyright (c) 2009 by:
+ *	 Mauro Carvalho Chehab <[e-mail]>
+ *
+ * Red Hat Inc. http://www.redhat.com
+ */
+
+#include <linux/module.h>
+#include <linux/edac_mce.h>
+#include <asm/mce.h>
+
+int edac_mce_enabled;
+EXPORT_SYMBOL_GPL(edac_mce_enabled);
+
+
+/*
+ * Extension interface
+ */
+
+static LIST_HEAD(edac_mce_list);
+static DEFINE_MUTEX(edac_mce_lock);
+
+int edac_mce_register(struct edac_mce *edac_mce)
+{
+	mutex_lock(&edac_mce_lock);
+	list_add_tail(&edac_mce->list, &edac_mce_list);
+	mutex_unlock(&edac_mce_lock);
+	return 0;
+}
+EXPORT_SYMBOL(edac_mce_register);
+
+void edac_mce_unregister(struct edac_mce *edac_mce)
+{
+	mutex_lock(&edac_mce_lock);
+	list_del(&edac_mce->list);
+	mutex_unlock(&edac_mce_lock);
+}
+EXPORT_SYMBOL(edac_mce_unregister);
+
+int edac_mce_parse(struct mce *mce)
+{
+	struct edac_mce *edac_mce;
+
+	list_for_each_entry(edac_mce, &edac_mce_list, list) {
+		if (edac_mce->check_error(edac_mce->priv, mce))
+			return 1;
+	}
+
+	/* Nobody queued the error */
+	return 0;
+}
+EXPORT_SYMBOL_GPL(edac_mce_parse);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <[e-mail]>");
+MODULE_AUTHOR("Red Hat Inc. (http://www.redhat.com)");
+MODULE_DESCRIPTION("EDAC Driver for mcelog captured errors");

drivers/edac/i7core_edac.c

···
+/* Intel i7 core/Nehalem Memory Controller kernel module
+ *
+ * This driver supports yhe memory controllers found on the Intel
+ * processor families i7core, i7core 7xx/8xx, i5core, Xeon 35xx,
+ * Xeon 55xx and Xeon 56xx also known as Nehalem, Nehalem-EP, Lynnfield
+ * and Westmere-EP.
+ *
+ * This file may be distributed under the terms of the
+ * GNU General Public License version 2 only.
+ *
+ * Copyright (c) 2009-2010 by:
+ *	 Mauro Carvalho Chehab <[e-mail]>
+ *
+ * Red Hat Inc. http://www.redhat.com
+ *
+ * Forked and adapted from the i5400_edac driver
+ *
+ * Based on the following public Intel datasheets:
+ * Intel Core i7 Processor Extreme Edition and Intel Core i7 Processor
+ * Datasheet, Volume 2:
+ *	http://download.intel.com/design/processor/datashts/320835.pdf
+ * Intel Xeon Processor 5500 Series Datasheet Volume 2
+ *	http://www.intel.com/Assets/PDF/datasheet/321322.pdf
+ * also available at:
+ * 	http://www.arrownac.com/manufacturers/intel/s/nehalem/5500-datasheet-v2.pdf
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/pci_ids.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/edac.h>
+#include <linux/mmzone.h>
+#include <linux/edac_mce.h>
+#include <linux/smp.h>
+#include <asm/processor.h>
+
+#include "edac_core.h"
+
+/*
+ * This is used for Nehalem-EP and Nehalem-EX devices, where the non-core
+ * registers start at bus 255, and are not reported by BIOS.
+ * We currently find devices with only 2 sockets. In order to support more QPI
+ * Quick Path Interconnect, just increment this number.
+ */
+#define MAX_SOCKET_BUSES	2
+
+
+/*
+ * Alter this version for the module when modifications are made
+ */
+#define I7CORE_REVISION    " Ver: 1.0.0 " __DATE__
+#define EDAC_MOD_STR      "i7core_edac"
+
+/*
+ * Debug macros
+ */
+#define i7core_printk(level, fmt, arg...)			\
+	edac_printk(level, "i7core", fmt, ##arg)
+
+#define i7core_mc_printk(mci, level, fmt, arg...)		\
+	edac_mc_chipset_printk(mci, level, "i7core", fmt, ##arg)
+
+/*
+ * i7core Memory Controller Registers
+ */
+
+	/* OFFSETS for Device 0 Function 0 */
+
+#define MC_CFG_CONTROL	0x90
+
+	/* OFFSETS for Device 3 Function 0 */
+
+#define MC_CONTROL	0x48
+#define MC_STATUS	0x4c
+#define MC_MAX_DOD	0x64
+
+/*
+ * OFFSETS for Device 3 Function 4, as inicated on Xeon 5500 datasheet:
+ * http://www.arrownac.com/manufacturers/intel/s/nehalem/5500-datasheet-v2.pdf
+ */
+
+#define MC_TEST_ERR_RCV1	0x60
+  #define DIMM2_COR_ERR(r)			((r) & 0x7fff)
+
+#define MC_TEST_ERR_RCV0	0x64
+  #define DIMM1_COR_ERR(r)			(((r) >> 16) & 0x7fff)
+  #define DIMM0_COR_ERR(r)			((r) & 0x7fff)
+
+/* OFFSETS for Device 3 Function 2, as inicated on Xeon 5500 datasheet */
+#define MC_COR_ECC_CNT_0	0x80
+#define MC_COR_ECC_CNT_1	0x84
+#define MC_COR_ECC_CNT_2	0x88
+#define MC_COR_ECC_CNT_3	0x8c
+#define MC_COR_ECC_CNT_4	0x90
+#define MC_COR_ECC_CNT_5	0x94
+
+#define DIMM_TOP_COR_ERR(r)			(((r) >> 16) & 0x7fff)
+#define DIMM_BOT_COR_ERR(r)			((r) & 0x7fff)
+
+
+	/* OFFSETS for Devices 4,5 and 6 Function 0 */
+
+#define MC_CHANNEL_DIMM_INIT_PARAMS 0x58
+  #define THREE_DIMMS_PRESENT		(1 << 24)
+  #define SINGLE_QUAD_RANK_PRESENT	(1 << 23)
+  #define QUAD_RANK_PRESENT		(1 << 22)
+  #define REGISTERED_DIMM		(1 << 15)
+
+#define MC_CHANNEL_MAPPER	0x60
+  #define RDLCH(r, ch)		((((r) >> (3 + (ch * 6))) & 0x07) - 1)
+  #define WRLCH(r, ch)		((((r) >> (ch * 6)) & 0x07) - 1)
+
+#define MC_CHANNEL_RANK_PRESENT 0x7c
+  #define RANK_PRESENT_MASK		0xffff
+
+#define MC_CHANNEL_ADDR_MATCH	0xf0
+#define MC_CHANNEL_ERROR_MASK	0xf8
+#define MC_CHANNEL_ERROR_INJECT	0xfc
+  #define INJECT_ADDR_PARITY	0x10
+  #define INJECT_ECC		0x08
+  #define MASK_CACHELINE	0x06
+  #define MASK_FULL_CACHELINE	0x06
+  #define MASK_MSB32_CACHELINE	0x04
+  #define MASK_LSB32_CACHELINE	0x02
+  #define NO_MASK_CACHELINE	0x00
+  #define REPEAT_EN		0x01
+
+	/* OFFSETS for Devices 4,5 and 6 Function 1 */
+
+#define MC_DOD_CH_DIMM0		0x48
+#define MC_DOD_CH_DIMM1		0x4c
+#define MC_DOD_CH_DIMM2		0x50
+  #define RANKOFFSET_MASK	((1 << 12) | (1 << 11) | (1 << 10))
+  #define RANKOFFSET(x)		((x & RANKOFFSET_MASK) >> 10)
+  #define DIMM_PRESENT_MASK	(1 << 9)
+  #define DIMM_PRESENT(x)	(((x) & DIMM_PRESENT_MASK) >> 9)
+  #define MC_DOD_NUMBANK_MASK		((1 << 8) | (1 << 7))
+  #define MC_DOD_NUMBANK(x)		(((x) & MC_DOD_NUMBANK_MASK) >> 7)
+  #define MC_DOD_NUMRANK_MASK		((1 << 6) | (1 << 5))
+  #define MC_DOD_NUMRANK(x)		(((x) & MC_DOD_NUMRANK_MASK) >> 5)
+  #define MC_DOD_NUMROW_MASK		((1 << 4) | (1 << 3) | (1 << 2))
+  #define MC_DOD_NUMROW(x)		(((x) & MC_DOD_NUMROW_MASK) >> 2)
+  #define MC_DOD_NUMCOL_MASK		3
+  #define MC_DOD_NUMCOL(x)		((x) & MC_DOD_NUMCOL_MASK)
+
+#define MC_RANK_PRESENT		0x7c
+
+#define MC_SAG_CH_0	0x80
+#define MC_SAG_CH_1	0x84
+#define MC_SAG_CH_2	0x88
+#define MC_SAG_CH_3	0x8c
+#define MC_SAG_CH_4	0x90
+#define MC_SAG_CH_5	0x94
+#define MC_SAG_CH_6	0x98
+#define MC_SAG_CH_7	0x9c
+
+#define MC_RIR_LIMIT_CH_0	0x40
+#define MC_RIR_LIMIT_CH_1	0x44
+#define MC_RIR_LIMIT_CH_2	0x48
+#define MC_RIR_LIMIT_CH_3	0x4C
+#define MC_RIR_LIMIT_CH_4	0x50
+#define MC_RIR_LIMIT_CH_5	0x54
+#define MC_RIR_LIMIT_CH_6	0x58
+#define MC_RIR_LIMIT_CH_7	0x5C
+#define MC_RIR_LIMIT_MASK	((1 << 10) - 1)
+
+#define MC_RIR_WAY_CH		0x80
+  #define MC_RIR_WAY_OFFSET_MASK	(((1 << 14) - 1) & ~0x7)
+  #define MC_RIR_WAY_RANK_MASK		0x7
+
+/*
+ * i7core structs
+ */
+
+#define NUM_CHANS 3
+#define MAX_DIMMS 3		/* Max DIMMS per channel */
+#define MAX_MCR_FUNC  4
+#define MAX_CHAN_FUNC 3
+
+struct i7core_info {
+	u32	mc_control;
+	u32	mc_status;
+	u32	max_dod;
+	u32	ch_map;
+};
+
+
+struct i7core_inject {
+	int	enable;
+
+	u32	section;
+	u32	type;
+	u32	eccmask;
+
+	/* Error address mask */
+	int channel, dimm, rank, bank, page, col;
+};
+
+struct i7core_channel {
+	u32		ranks;
+	u32		dimms;
+};
+
+struct pci_id_descr {
+	int			dev;
+	int			func;
+	int 			dev_id;
+	int			optional;
+};
+
+struct pci_id_table {
+	struct pci_id_descr	*descr;
+	int			n_devs;
+};
+
+struct i7core_dev {
+	struct list_head	list;
+	u8			socket;
+	struct pci_dev		**pdev;
+	int			n_devs;
+	struct mem_ctl_info	*mci;
+};
+
+struct i7core_pvt {
+	struct pci_dev	*pci_noncore;
+	struct pci_dev	*pci_mcr[MAX_MCR_FUNC + 1];
+	struct pci_dev	*pci_ch[NUM_CHANS][MAX_CHAN_FUNC + 1];
+
+	struct i7core_dev *i7core_dev;
+
+	struct i7core_info	info;
+	struct i7core_inject	inject;
+	struct i7core_channel	channel[NUM_CHANS];
+
+	int		channels; /* Number of active channels */
+
+	int		ce_count_available;
+	int 		csrow_map[NUM_CHANS][MAX_DIMMS];
+
+			/* ECC corrected errors counts per udimm */
+	unsigned long	udimm_ce_count[MAX_DIMMS];
+	int		udimm_last_ce_count[MAX_DIMMS];
+			/* ECC corrected errors counts per rdimm */
+	unsigned long	rdimm_ce_count[NUM_CHANS][MAX_DIMMS];
+	int		rdimm_last_ce_count[NUM_CHANS][MAX_DIMMS];
+
+	unsigned int	is_registered;
+
+	/* mcelog glue */
+	struct edac_mce		edac_mce;
+
+	/* Fifo double buffers */
+	struct mce		mce_entry[MCE_LOG_LEN];
+	struct mce		mce_outentry[MCE_LOG_LEN];
+
+	/* Fifo in/out counters */
+	unsigned		mce_in, mce_out;
+
+	/* Count indicator to show errors not got */
+	unsigned		mce_overrun;
+};
+
+/* Static vars */
+static LIST_HEAD(i7core_edac_list);
+static DEFINE_MUTEX(i7core_edac_lock);
+
+#define PCI_DESCR(device, function, device_id)	\
+	.dev = (device),			\
+	.func = (function),			\
+	.dev_id = (device_id)
+
+struct pci_id_descr pci_dev_descr_i7core_nehalem[] = {
+		/* Memory controller */
+	{ PCI_DESCR(3, 0, PCI_DEVICE_ID_INTEL_I7_MCR)     },
+	{ PCI_DESCR(3, 1, PCI_DEVICE_ID_INTEL_I7_MC_TAD)  },
+			/* Exists only for RDIMM */
+	{ PCI_DESCR(3, 2, PCI_DEVICE_ID_INTEL_I7_MC_RAS), .optional = 1  },
+	{ PCI_DESCR(3, 4, PCI_DEVICE_ID_INTEL_I7_MC_TEST) },
+
+		/* Channel 0 */
+	{ PCI_DESCR(4, 0, PCI_DEVICE_ID_INTEL_I7_MC_CH0_CTRL) },
+	{ PCI_DESCR(4, 1, PCI_DEVICE_ID_INTEL_I7_MC_CH0_ADDR) },
+	{ PCI_DESCR(4, 2, PCI_DEVICE_ID_INTEL_I7_MC_CH0_RANK) },
+	{ PCI_DESCR(4, 3, PCI_DEVICE_ID_INTEL_I7_MC_CH0_TC)   },
+
+		/* Channel 1 */
+	{ PCI_DESCR(5, 0, PCI_DEVICE_ID_INTEL_I7_MC_CH1_CTRL) },
+	{ PCI_DESCR(5, 1, PCI_DEVICE_ID_INTEL_I7_MC_CH1_ADDR) },
+	{ PCI_DESCR(5, 2, PCI_DEVICE_ID_INTEL_I7_MC_CH1_RANK) },
+	{ PCI_DESCR(5, 3, PCI_DEVICE_ID_INTEL_I7_MC_CH1_TC)   },
+
+		/* Channel 2 */
+	{ PCI_DESCR(6, 0, PCI_DEVICE_ID_INTEL_I7_MC_CH2_CTRL) },
+	{ PCI_DESCR(6, 1, PCI_DEVICE_ID_INTEL_I7_MC_CH2_ADDR) },
+	{ PCI_DESCR(6, 2, PCI_DEVICE_ID_INTEL_I7_MC_CH2_RANK) },
+	{ PCI_DESCR(6, 3, PCI_DEVICE_ID_INTEL_I7_MC_CH2_TC)   },
+
+		/* Generic Non-core registers */
+	/*
+	 * This is the PCI device on i7core and on Xeon 35xx (8086:2c41)
+	 * On Xeon 55xx, however, it has a different id (8086:2c40). So,
+	 * the probing code needs to test for the other address in case of
+	 * failure of this one
+	 */
+	{ PCI_DESCR(0, 0, PCI_DEVICE_ID_INTEL_I7_NONCORE)  },
+
+};
+
+struct pci_id_descr pci_dev_descr_lynnfield[] = {
+	{ PCI_DESCR( 3, 0, PCI_DEVICE_ID_INTEL_LYNNFIELD_MCR)         },
+	{ PCI_DESCR( 3, 1, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_TAD)      },
+	{ PCI_DESCR( 3, 4, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_TEST)     },
+
+	{ PCI_DESCR( 4, 0, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_CTRL) },
+	{ PCI_DESCR( 4, 1, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_ADDR) },
+	{ PCI_DESCR( 4, 2, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_RANK) },
+	{ PCI_DESCR( 4, 3, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_TC)   },
+
+	{ PCI_DESCR( 5, 0, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_CTRL) },
+	{ PCI_DESCR( 5, 1, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_ADDR) },
+	{ PCI_DESCR( 5, 2, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_RANK) },
+	{ PCI_DESCR( 5, 3, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_TC)   },
+
+	/*
+	 * This is the PCI device has an alternate address on some
+	 * processors like Core i7 860
+	 */
+	{ PCI_DESCR( 0, 0, PCI_DEVICE_ID_INTEL_LYNNFIELD_NONCORE)     },
+};
+
+struct pci_id_descr pci_dev_descr_i7core_westmere[] = {
+		/* Memory controller */
+	{ PCI_DESCR(3, 0, PCI_DEVICE_ID_INTEL_LYNNFIELD_MCR_REV2)     },
+	{ PCI_DESCR(3, 1, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_TAD_REV2)  },
+			/* Exists only for RDIMM */
+	{ PCI_DESCR(3, 2, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_RAS_REV2), .optional = 1  },
+	{ PCI_DESCR(3, 4, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_TEST_REV2) },
+
+		/* Channel 0 */
+	{ PCI_DESCR(4, 0, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_CTRL_REV2) },
+	{ PCI_DESCR(4, 1, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_ADDR_REV2) },
+	{ PCI_DESCR(4, 2, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_RANK_REV2) },
+	{ PCI_DESCR(4, 3, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_TC_REV2)   },
+
+		/* Channel 1 */
+	{ PCI_DESCR(5, 0, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_CTRL_REV2) },
+	{ PCI_DESCR(5, 1, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_ADDR_REV2) },
+	{ PCI_DESCR(5, 2, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_RANK_REV2) },
+	{ PCI_DESCR(5, 3, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_TC_REV2)   },
+
+		/* Channel 2 */
+	{ PCI_DESCR(6, 0, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH2_CTRL_REV2) },
+	{ PCI_DESCR(6, 1, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH2_ADDR_REV2) },
+	{ PCI_DESCR(6, 2, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH2_RANK_REV2) },
+	{ PCI_DESCR(6, 3, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH2_TC_REV2)   },
+
+		/* Generic Non-core registers */
+	{ PCI_DESCR(0, 0, PCI_DEVICE_ID_INTEL_LYNNFIELD_NONCORE_REV2)  },
+
+};
+
+#define PCI_ID_TABLE_ENTRY(A) { A, ARRAY_SIZE(A) }
+struct pci_id_table pci_dev_table[] = {
+	PCI_ID_TABLE_ENTRY(pci_dev_descr_i7core_nehalem),
+	PCI_ID_TABLE_ENTRY(pci_dev_descr_lynnfield),
+	PCI_ID_TABLE_ENTRY(pci_dev_descr_i7core_westmere),
+};
+
+/*
+ *	pci_device_id	table for which devices we are looking for
+ */
+static const struct pci_device_id i7core_pci_tbl[] __devinitdata = {
+	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_X58_HUB_MGMT)},
+	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LYNNFIELD_QPI_LINK0)},
+	{0,}			/* 0 terminated list. */
+};
+
+static struct edac_pci_ctl_info *i7core_pci;
+
+/****************************************************************************
+			Anciliary status routines
+ ****************************************************************************/
+
+	/* MC_CONTROL bits */
+#define CH_ACTIVE(pvt, ch)	((pvt)->info.mc_control & (1 << (8 + ch)))
+#define ECCx8(pvt)		((pvt)->info.mc_control & (1 << 1))
+
+	/* MC_STATUS bits */
+#define ECC_ENABLED(pvt)	((pvt)->info.mc_status & (1 << 4))
+#define CH_DISABLED(pvt, ch)	((pvt)->info.mc_status & (1 << ch))
+
+	/* MC_MAX_DOD read functions */
+static inline int numdimms(u32 dimms)
+{
+	return (dimms & 0x3) + 1;
+}
+
+static inline int numrank(u32 rank)
+{
+	static int ranks[4] = { 1, 2, 4, -EINVAL };
+
+	return ranks[rank & 0x3];
+}
+
+static inline int numbank(u32 bank)
+{
+	static int banks[4] = { 4, 8, 16, -EINVAL };
+
+	return banks[bank & 0x3];
+}
+
+static inline int numrow(u32 row)
+{
+	static int rows[8] = {
+		1 << 12, 1 << 13, 1 << 14, 1 << 15,
+		1 << 16, -EINVAL, -EINVAL, -EINVAL,
+	};
+
+	return rows[row & 0x7];
+}
+
+static inline int numcol(u32 col)
+{
+	static int cols[8] = {
+		1 << 10, 1 << 11, 1 << 12, -EINVAL,
+	};
+	return cols[col & 0x3];
+}
+
+static struct i7core_dev *get_i7core_dev(u8 socket)
+{
+	struct i7core_dev *i7core_dev;
+
+	list_for_each_entry(i7core_dev, &i7core_edac_list, list) {
+		if (i7core_dev->socket == socket)
+			return i7core_dev;
+	}
+
+	return NULL;
+}
+
+/****************************************************************************
+			Memory check routines
+ ****************************************************************************/
+static struct pci_dev *get_pdev_slot_func(u8 socket, unsigned slot,
+					  unsigned func)
+{
+	struct i7core_dev *i7core_dev = get_i7core_dev(socket);
+	int i;
+
+	if (!i7core_dev)
+		return NULL;
+
+	for (i = 0; i < i7core_dev->n_devs; i++) {
+		if (!i7core_dev->pdev[i])
+			continue;
+
+		if (PCI_SLOT(i7core_dev->pdev[i]->devfn) == slot &&
+		    PCI_FUNC(i7core_dev->pdev[i]->devfn) == func) {
+			return i7core_dev->pdev[i];
+		}
+	}
+
+	return NULL;
+}
+
+/**
+ * i7core_get_active_channels() - gets the number of channels and csrows
+ * @socket:	Quick Path Interconnect socket
+ * @channels:	Number of channels that will be returned
+ * @csrows:	Number of csrows found
+ *
+ * Since EDAC core needs to know in advance the number of available channels
+ * and csrows, in order to allocate memory for csrows/channels, it is needed
+ * to run two similar steps. At the first step, implemented on this function,
+ * it checks the number of csrows/channels present at one socket.
+ * this is used in order to properly allocate the size of mci components.
+ *
+ * It should be noticed that none of the current available datasheets explain
+ * or even mention how csrows are seen by the memory controller. So, we need
+ * to add a fake description for csrows.
+ * So, this driver is attributing one DIMM memory for one csrow.
+ */
+static int i7core_get_active_channels(u8 socket, unsigned *channels,
+				      unsigned *csrows)
+{
+	struct pci_dev *pdev = NULL;
+	int i, j;
+	u32 status, control;
+
+	*channels = 0;
+	*csrows = 0;
+
+	pdev = get_pdev_slot_func(socket, 3, 0);
+	if (!pdev) {
+		i7core_printk(KERN_ERR, "Couldn't find socket %d fn 3.0!!!\n",
+			      socket);
+		return -ENODEV;
+	}
+
+	/* Device 3 function 0 reads */
+	pci_read_config_dword(pdev, MC_STATUS, &status);
+	pci_read_config_dword(pdev, MC_CONTROL, &control);
+
+	for (i = 0; i < NUM_CHANS; i++) {
+		u32 dimm_dod[3];
+		/* Check if the channel is active */
+		if (!(control & (1 << (8 + i))))
+			continue;
+
+		/* Check if the channel is disabled */
+		if (status & (1 << i))
+			continue;
+
+		pdev = get_pdev_slot_func(socket, i + 4, 1);
+		if (!pdev) {
+			i7core_printk(KERN_ERR, "Couldn't find socket %d "
+						"fn %d.%d!!!\n",
+						socket, i + 4, 1);
+			return -ENODEV;
+		}
+		/* Devices 4-6 function 1 */
+		pci_read_config_dword(pdev,
+				MC_DOD_CH_DIMM0, &dimm_dod[0]);
+		pci_read_config_dword(pdev,
+				MC_DOD_CH_DIMM1, &dimm_dod[1]);
+		pci_read_config_dword(pdev,
+				MC_DOD_CH_DIMM2, &dimm_dod[2]);
+
+		(*channels)++;
+
+		for (j = 0; j < 3; j++) {
+			if (!DIMM_PRESENT(dimm_dod[j]))
+				continue;
+			(*csrows)++;
+		}
+	}
+
+	debugf0("Number of active channels on socket %d: %d\n",
+		socket, *channels);
+
+	return 0;
+}
+
+static int get_dimm_config(struct mem_ctl_info *mci, int *csrow)
+{
+	struct i7core_pvt *pvt = mci->pvt_info;
+	struct csrow_info *csr;
+	struct pci_dev *pdev;
+	int i, j;
+	unsigned long last_page = 0;
+	enum edac_type mode;
+	enum mem_type mtype;
+
+	/* Get data from the MC register, function 0 */
+	pdev = pvt->pci_mcr[0];
+	if (!pdev)
+		return -ENODEV;
+
+	/* Device 3 function 0 reads */
+	pci_read_config_dword(pdev, MC_CONTROL, &pvt->info.mc_control);
+	pci_read_config_dword(pdev, MC_STATUS, &pvt->info.mc_status);
+	pci_read_config_dword(pdev, MC_MAX_DOD, &pvt->info.max_dod);
+	pci_read_config_dword(pdev, MC_CHANNEL_MAPPER, &pvt->info.ch_map);
+
+	debugf0("QPI %d control=0x%08x status=0x%08x dod=0x%08x map=0x%08x\n",
+		pvt->i7core_dev->socket, pvt->info.mc_control, pvt->info.mc_status,
+		pvt->info.max_dod, pvt->info.ch_map);
+
+	if (ECC_ENABLED(pvt)) {
+		debugf0("ECC enabled with x%d SDCC\n", ECCx8(pvt) ? 8 : 4);
+		if (ECCx8(pvt))
+			mode = EDAC_S8ECD8ED;
+		else
+			mode = EDAC_S4ECD4ED;
+	} else {
+		debugf0("ECC disabled\n");
+		mode = EDAC_NONE;
+	}
+
+	/* FIXME: need to handle the error codes */
+	debugf0("DOD Max limits: DIMMS: %d, %d-ranked, %d-banked "
+		"x%x x 0x%x\n",
+		numdimms(pvt->info.max_dod),
+		numrank(pvt->info.max_dod >> 2),
+		numbank(pvt->info.max_dod >> 4),
+		numrow(pvt->info.max_dod >> 6),
+		numcol(pvt->info.max_dod >> 9));
+
+	for (i = 0; i < NUM_CHANS; i++) {
+		u32 data, dimm_dod[3], value[8];
+
+		if (!pvt->pci_ch[i][0])
+			continue;
+
+		if (!CH_ACTIVE(pvt, i)) {
+			debugf0("Channel %i is not active\n", i);
+			continue;
+		}
+		if (CH_DISABLED(pvt, i)) {
+			debugf0("Channel %i is disabled\n", i);
+			continue;
+		}
+
+		/* Devices 4-6 function 0 */
+		pci_read_config_dword(pvt->pci_ch[i][0],
+				MC_CHANNEL_DIMM_INIT_PARAMS, &data);
+
+		pvt->channel[i].ranks = (data & QUAD_RANK_PRESENT) ?
+						4 : 2;
+
+		if (data & REGISTERED_DIMM)
+			mtype = MEM_RDDR3;
+		else
+			mtype = MEM_DDR3;
+#if 0
+		if (data & THREE_DIMMS_PRESENT)
+			pvt->channel[i].dimms = 3;
+		else if (data & SINGLE_QUAD_RANK_PRESENT)
+			pvt->channel[i].dimms = 1;
+		else
+			pvt->channel[i].dimms = 2;
+#endif
+
+		/* Devices 4-6 function 1 */
+		pci_read_config_dword(pvt->pci_ch[i][1],
+				MC_DOD_CH_DIMM0, &dimm_dod[0]);
+		pci_read_config_dword(pvt->pci_ch[i][1],
+				MC_DOD_CH_DIMM1, &dimm_dod[1]);
+		pci_read_config_dword(pvt->pci_ch[i][1],
+				MC_DOD_CH_DIMM2, &dimm_dod[2]);
+
+		debugf0("Ch%d phy rd%d, wr%d (0x%08x): "
+			"%d ranks, %cDIMMs\n",
+			i,
+			RDLCH(pvt->info.ch_map, i), WRLCH(pvt->info.ch_map, i),
+			data,
+			pvt->channel[i].ranks,
+			(data & REGISTERED_DIMM) ? 'R' : 'U');
+
+		for (j = 0; j < 3; j++) {
+			u32 banks, ranks, rows, cols;
+			u32 size, npages;
+
+			if (!DIMM_PRESENT(dimm_dod[j]))
+				continue;
+
+			banks = numbank(MC_DOD_NUMBANK(dimm_dod[j]));
+			ranks = numrank(MC_DOD_NUMRANK(dimm_dod[j]));
+			rows = numrow(MC_DOD_NUMROW(dimm_dod[j]));
+			cols = numcol(MC_DOD_NUMCOL(dimm_dod[j]));
+
+			/* DDR3 has 8 I/O banks */
+			size = (rows * cols * banks * ranks) >> (20 - 3);
+
+			pvt->channel[i].dimms++;
+
+			debugf0("\tdimm %d %d Mb offset: %x, "
+				"bank: %d, rank: %d, row: %#x, col: %#x\n",
+				j, size,
+				RANKOFFSET(dimm_dod[j]),
+				banks, ranks, rows, cols);
+
+#if PAGE_SHIFT > 20
+			npages = size >> (PAGE_SHIFT - 20);
+#else
+			npages = size << (20 - PAGE_SHIFT);
+#endif
+
+			csr = &mci->csrows[*csrow];
+			csr->first_page = last_page + 1;
+			last_page += npages;
+			csr->last_page = last_page;
+			csr->nr_pages = npages;
+
+			csr->page_mask = 0;
+			csr->grain = 8;
+			csr->csrow_idx = *csrow;
+			csr->nr_channels = 1;
+
+			csr->channels[0].chan_idx = i;
+			csr->channels[0].ce_count = 0;
+
+			pvt->csrow_map[i][j] = *csrow;
+
+			switch (banks) {
+			case 4:
+				csr->dtype = DEV_X4;
+				break;
+			case 8:
+				csr->dtype = DEV_X8;
+				break;
+			case 16:
+				csr->dtype = DEV_X16;
+				break;
+			default:
+				csr->dtype = DEV_UNKNOWN;
+			}
+
+			csr->edac_mode = mode;
+			csr->mtype = mtype;
+
+			(*csrow)++;
+		}
+
+		pci_read_config_dword(pdev, MC_SAG_CH_0, &value[0]);
+		pci_read_config_dword(pdev, MC_SAG_CH_1, &value[1]);
+		pci_read_config_dword(pdev, MC_SAG_CH_2, &value[2]);
+		pci_read_config_dword(pdev, MC_SAG_CH_3, &value[3]);
+		pci_read_config_dword(pdev, MC_SAG_CH_4, &value[4]);
+		pci_read_config_dword(pdev, MC_SAG_CH_5, &value[5]);
+		pci_read_config_dword(pdev, MC_SAG_CH_6, &value[6]);
+		pci_read_config_dword(pdev, MC_SAG_CH_7, &value[7]);
+		debugf1("\t[%i] DIVBY3\tREMOVED\tOFFSET\n", i);
+		for (j = 0; j < 8; j++)
+			debugf1("\t\t%#x\t%#x\t%#x\n",
+				(value[j] >> 27) & 0x1,
+				(value[j] >> 24) & 0x7,
+				(value[j] && ((1 << 24) - 1)));
+	}
+
+	return 0;
+}
+
+/****************************************************************************
+			Error insertion routines
+ ****************************************************************************/
+
+/* The i7core has independent error injection features per channel.
+   However, to have a simpler code, we don't allow enabling error injection
+   on more than one channel.
+   Also, since a change at an inject parameter will be applied only at enable,
+   we're disabling error injection on all write calls to the sysfs nodes that
+   controls the error code injection.
+ */
+static int disable_inject(struct mem_ctl_info *mci)
+{
+	struct i7core_pvt *pvt = mci->pvt_info;
+
+	pvt->inject.enable = 0;
+
+	if (!pvt->pci_ch[pvt->inject.channel][0])
+		return -ENODEV;
+
+	pci_write_config_dword(pvt->pci_ch[pvt->inject.channel][0],
+				MC_CHANNEL_ERROR_INJECT, 0);
+
+	return 0;
+}
+
+/*
+ * i7core inject inject.section
+ *
+ *	accept and store error injection inject.section value
+ *	bit 0 - refers to the lower 32-byte half cacheline
+ *	bit 1 - refers to the upper 32-byte half cacheline
+ */
+static ssize_t i7core_inject_section_store(struct mem_ctl_info *mci,
+					   const char *data, size_t count)
+{
+	struct i7core_pvt *pvt = mci->pvt_info;
+	unsigned long value;
+	int rc;
+
+	if (pvt->inject.enable)
+		disable_inject(mci);
+
+	rc = strict_strtoul(data, 10, &value);
+	if ((rc < 0) || (value > 3))
+		return -EIO;
+
+	pvt->inject.section = (u32) value;
+	return count;
+}
+
+static ssize_t i7core_inject_section_show(struct mem_ctl_info *mci,
+					      char *data)
+{
+	struct i7core_pvt *pvt = mci->pvt_info;
+	return sprintf(data, "0x%08x\n", pvt->inject.section);
+}
+
+/*
+ * i7core inject.type
+ *
+ *	accept and store error injection inject.section value
+ *	bit 0 - repeat enable - Enable error repetition
+ *	bit 1 - inject ECC error
+ *	bit 2 - inject parity error
+ */
+static ssize_t i7core_inject_type_store(struct mem_ctl_info *mci,
+					const char *data, size_t count)
+{
+	struct i7core_pvt *pvt = mci->pvt_info;
+	unsigned long value;
+	int rc;
+
+	if (pvt->inject.enable)
+		disable_inject(mci);
+
+	rc = strict_strtoul(data, 10, &value);
+	if ((rc < 0) || (value > 7))
+		return -EIO;
+
+	pvt->inject.type = (u32) value;
+	return count;
+}
+
+static ssize_t i7core_inject_type_show(struct mem_ctl_info *mci,
+					      char *data)
+{
+	struct i7core_pvt *pvt = mci->pvt_info;
+	return sprintf(data, "0x%08x\n", pvt->inject.type);
+}
+
+/*
+ * i7core_inject_inject.eccmask_store
+ *
+ * The type of error (UE/CE) will depend on the inject.eccmask value:
+ *   Any bits set to a 1 will flip the corresponding ECC bit
+ *   Correctable errors can be injected by flipping 1 bit or the bits within
+ *   a symbol pair (2 consecutive aligned 8-bit pairs - i.e. 7:0 and 15:8 or
+ *   23:16 and 31:24). Flipping bits in two symbol pairs will cause an
+ *   uncorrectable error to be injected.
+ */
+static ssize_t i7core_inject_eccmask_store(struct mem_ctl_info *mci,
+					const char *data, size_t count)
+{
+	struct i7core_pvt *pvt = mci->pvt_info;
+	unsigned long value;
+	int rc;
+
+	if (pvt->inject.enable)
+		disable_inject(mci);
+
+	rc = strict_strtoul(data, 10, &value);
+	if (rc < 0)
+		return -EIO;
+
+	pvt->inject.eccmask = (u32) value;
+	return count;
+}
+
+static ssize_t i7core_inject_eccmask_show(struct mem_ctl_info *mci,
+					      char *data)
+{
+	struct i7core_pvt *pvt = mci->pvt_info;
+	return sprintf(data, "0x%08x\n", pvt->inject.eccmask);
+}
+
+/*
+ * i7core_addrmatch
+ *
+ * The type of error (UE/CE) will depend on the inject.eccmask value:
+ *   Any bits set to a 1 will flip the corresponding ECC bit
+ *   Correctable errors can be injected by flipping 1 bit or the bits within
+ *   a symbol pair (2 consecutive aligned 8-bit pairs - i.e. 7:0 and 15:8 or
+ *   23:16 and 31:24). Flipping bits in two symbol pairs will cause an
+ *   uncorrectable error to be injected.
+ */
+
+#define DECLARE_ADDR_MATCH(param, limit)			\
+static ssize_t i7core_inject_store_##param(			\
+		struct mem_ctl_info *mci,			\
+		const char *data, size_t count)			\
+{								\
+	struct i7core_pvt *pvt;					\
+	long value;						\
+	int rc;							\
+								\
+	debugf1("%s()\n", __func__);				\
+	pvt = mci->pvt_info;					\
+								\
+	if (pvt->inject.enable)					\
+		disable_inject(mci);				\
+								\
+	if (!strcasecmp(data, "any") || !strcasecmp(data, "any\n"))\
+		value = -1;					\
+	else {							\
+		rc = strict_strtoul(data, 10, &value);		\
+		if ((rc < 0) || (value >= limit))		\
+			return -EIO;				\
+	}							\
+								\
+	pvt->inject.param = value;				\
+								\
+	return count;						\
+}								\
+								\
+static ssize_t i7core_inject_show_##param(			\
+		struct mem_ctl_info *mci,			\
+		char *data)					\
+{								\
+	struct i7core_pvt *pvt;					\
+								\
+	pvt = mci->pvt_info;					\
+	debugf1("%s() pvt=%p\n", __func__, pvt);		\
+	if (pvt->inject.param < 0)				\
+		return sprintf(data, "any\n");			\
+	else							\
+		return sprintf(data, "%d\n", pvt->inject.param);\
+}
+
+#define ATTR_ADDR_MATCH(param)					\
+	{							\
+		.attr = {					\
+			.name = #param,				\
+			.mode = (S_IRUGO | S_IWUSR)		\
+		},						\
+		.show  = i7core_inject_show_##param,		\
+		.store = i7core_inject_store_##param,		\
+	}
+
+DECLARE_ADDR_MATCH(channel, 3);
+DECLARE_ADDR_MATCH(dimm, 3);
+DECLARE_ADDR_MATCH(rank, 4);
+DECLARE_ADDR_MATCH(bank, 32);
+DECLARE_ADDR_MATCH(page, 0x10000);
+DECLARE_ADDR_MATCH(col, 0x4000);
+
+static int write_and_test(struct pci_dev *dev, int where, u32 val)
+{
+	u32 read;
+	int count;
+
+	debugf0("setting pci %02x:%02x.%x reg=%02x value=%08x\n",
+		dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn),
+		where, val);
+
+	for (count = 0; count < 10; count++) {
+		if (count)
+			msleep(100);
+		pci_write_config_dword(dev, where, val);
+		pci_read_config_dword(dev, where, &read);
+
+		if (read == val)
+			return 0;
+	}
+
+	i7core_printk(KERN_ERR, "Error during set pci %02x:%02x.%x reg=%02x "
+		"write=%08x. Read=%08x\n",
+		dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn),
+		where, val, read);
+
+	return -EINVAL;
+}
+
+/*
+ * This routine prepares the Memory Controller for error injection.
+ * The error will be injected when some process tries to write to the
+ * memory that matches the given criteria.
+ * The criteria can be set in terms of a mask where dimm, rank, bank, page
+ * and col can be specified.
+ * A -1 value for any of the mask items will make the MCU to ignore
+ * that matching criteria for error injection.
+ *
+ * It should be noticed that the error will only happen after a write operation
+ * on a memory that matches the condition. if REPEAT_EN is not enabled at
+ * inject mask, then it will produce just one error. Otherwise, it will repeat
+ * until the injectmask would be cleaned.
+ *
+ * FIXME: This routine assumes that MAXNUMDIMMS value of MC_MAX_DOD
+ *    is reliable enough to check if the MC is using the
+ *    three channels. However, this is not clear at the datasheet.
+ */
+static ssize_t i7core_inject_enable_store(struct mem_ctl_info *mci,
+				       const char *data, size_t count)
+{
+	struct i7core_pvt *pvt = mci->pvt_info;
+	u32 injectmask;
+	u64 mask = 0;
+	int  rc;
+	long enable;
+
+	if (!pvt->pci_ch[pvt->inject.channel][0])
+		return 0;
+
+	rc = strict_strtoul(data, 10, &enable);
+	if ((rc < 0))
+		return 0;
+
+	if (enable) {
+		pvt->inject.enable = 1;
+	} else {
+		disable_inject(mci);
+		return count;
+	}
+
+	/* Sets pvt->inject.dimm mask */
+	if (pvt->inject.dimm < 0)
+		mask |= 1LL << 41;
+	else {
+		if (pvt->channel[pvt->inject.channel].dimms > 2)
+			mask |= (pvt->inject.dimm & 0x3LL) << 35;
+		else
+			mask |= (pvt->inject.dimm & 0x1LL) << 36;
+	}
+
+	/* Sets pvt->inject.rank mask */
+	if (pvt->inject.rank < 0)
+		mask |= 1LL << 40;
+	else {
+		if (pvt->channel[pvt->inject.channel].dimms > 2)
+			mask |= (pvt->inject.rank & 0x1LL) << 34;
+		else
+			mask |= (pvt->inject.rank & 0x3LL) << 34;
+	}
+
+	/* Sets pvt->inject.bank mask */
+	if (pvt->inject.bank < 0)
+		mask |= 1LL << 39;
+	else
+		mask |= (pvt->inject.bank & 0x15LL) << 30;
+
+	/* Sets pvt->inject.page mask */
+	if (pvt->inject.page < 0)
+		mask |= 1LL << 38;
+	else
+		mask |= (pvt->inject.page & 0xffff) << 14;
+
+	/* Sets pvt->inject.column mask */
+	if (pvt->inject.col < 0)
+		mask |= 1LL << 37;
+	else
+		mask |= (pvt->inject.col & 0x3fff);
+
+	/*
+	 * bit    0: REPEAT_EN
+	 * bits 1-2: MASK_HALF_CACHELINE
+	 * bit    3: INJECT_ECC
+	 * bit    4: INJECT_ADDR_PARITY
+	 */
+
+	injectmask = (pvt->inject.type & 1) |
+		     (pvt->inject.section & 0x3) << 1 |
+		     (pvt->inject.type & 0x6) << (3 - 1);
+
+	/* Unlock writes to registers - this register is write only */
+	pci_write_config_dword(pvt->pci_noncore,
+			       MC_CFG_CONTROL, 0x2);
+
+	write_and_test(pvt->pci_ch[pvt->inject.channel][0],
+			       MC_CHANNEL_ADDR_MATCH, mask);
+	write_and_test(pvt->pci_ch[pvt->inject.channel][0],
+			       MC_CHANNEL_ADDR_MATCH + 4, mask >> 32L);
+
+	write_and_test(pvt->pci_ch[pvt->inject.channel][0],
+			       MC_CHANNEL_ERROR_MASK, pvt->inject.eccmask);
+
+	write_and_test(pvt->pci_ch[pvt->inject.channel][0],
+			       MC_CHANNEL_ERROR_INJECT, injectmask);
+
+	/*
+	 * This is something undocumented, based on my tests
+	 * Without writing 8 to this register, errors aren't injected. Not sure
+	 * why.
+	 */
+	pci_write_config_dword(pvt->pci_noncore,
+			       MC_CFG_CONTROL, 8);
+
+	debugf0("Error inject addr match 0x%016llx, ecc 0x%08x,"
+		" inject 0x%08x\n",
+		mask, pvt->inject.eccmask, injectmask);
+
+
+	return count;
+}
+
+static ssize_t i7core_inject_enable_show(struct mem_ctl_info *mci,
+					char *data)
+{
+	struct i7core_pvt *pvt = mci->pvt_info;
+	u32 injectmask;
+
+	if (!pvt->pci_ch[pvt->inject.channel][0])
+		return 0;
+
+	pci_read_config_dword(pvt->pci_ch[pvt->inject.channel][0],
+			       MC_CHANNEL_ERROR_INJECT, &injectmask);
+
+	debugf0("Inject error read: 0x%018x\n", injectmask);
+
+	if (injectmask & 0x0c)
+		pvt->inject.enable = 1;
+
+	return sprintf(data, "%d\n", pvt->inject.enable);
+}
+
+#define DECLARE_COUNTER(param)					\
+static ssize_t i7core_show_counter_##param(			\
+		struct mem_ctl_info *mci,			\
+		char *data)					\
+{								\
+	struct i7core_pvt *pvt = mci->pvt_info;			\
+								\
+	debugf1("%s() \n", __func__);				\
+	if (!pvt->ce_count_available || (pvt->is_registered))	\
+		return sprintf(data, "data unavailable\n");	\
+	return sprintf(data, "%lu\n",				\
+			pvt->udimm_ce_count[param]);		\
+}
+
+#define ATTR_COUNTER(param)					\
+	{							\
+		.attr = {					\
+			.name = __stringify(udimm##param),	\
+			.mode = (S_IRUGO | S_IWUSR)		\
+		},						\
+		.show  = i7core_show_counter_##param		\
+	}
+
+DECLARE_COUNTER(0);
+DECLARE_COUNTER(1);
+DECLARE_COUNTER(2);
+
+/*
+ * Sysfs struct
+ */
+
+
+static struct mcidev_sysfs_attribute i7core_addrmatch_attrs[] = {
+	ATTR_ADDR_MATCH(channel),
+	ATTR_ADDR_MATCH(dimm),
+	ATTR_ADDR_MATCH(rank),
+	ATTR_ADDR_MATCH(bank),
+	ATTR_ADDR_MATCH(page),
+	ATTR_ADDR_MATCH(col),
+	{ .attr = { .name = NULL } }
+};
+
+static struct mcidev_sysfs_group i7core_inject_addrmatch = {
+	.name  = "inject_addrmatch",
+	.mcidev_attr = i7core_addrmatch_attrs,
+};
+
+static struct mcidev_sysfs_attribute i7core_udimm_counters_attrs[] = {
+	ATTR_COUNTER(0),
+	ATTR_COUNTER(1),
+	ATTR_COUNTER(2),
+};
+
+static struct mcidev_sysfs_group i7core_udimm_counters = {
+	.name  = "all_channel_counts",
+	.mcidev_attr = i7core_udimm_counters_attrs,
+};
+
+static struct mcidev_sysfs_attribute i7core_sysfs_attrs[] = {
+	{
+		.attr = {
+			.name = "inject_section",
+			.mode = (S_IRUGO | S_IWUSR)
+		},
+		.show  = i7core_inject_section_show,
+		.store = i7core_inject_section_store,
+	}, {
+		.attr = {
+			.name = "inject_type",
+			.mode = (S_IRUGO | S_IWUSR)
+		},
+		.show  = i7core_inject_type_show,
+		.store = i7core_inject_type_store,
+	}, {
+		.attr = {
+			.name = "inject_eccmask",
+			.mode = (S_IRUGO | S_IWUSR)
+		},
+		.show  = i7core_inject_eccmask_show,
+		.store = i7core_inject_eccmask_store,
+	}, {
+		.grp = &i7core_inject_addrmatch,
+	}, {
+		.attr = {
+			.name = "inject_enable",
+			.mode = (S_IRUGO | S_IWUSR)
+		},
+		.show  = i7core_inject_enable_show,
+		.store = i7core_inject_enable_store,
+	},
+	{ .attr = { .name = NULL } },	/* Reserved for udimm counters */
+	{ .attr = { .name = NULL } }
+};
+
+/****************************************************************************
+	Device initialization routines: put/get, init/exit
+ ****************************************************************************/
+
+/*
+ *	i7core_put_devices	'put' all the devices that we have
+ *				reserved via 'get'
+ */
+static void i7core_put_devices(struct i7core_dev *i7core_dev)
+{
+	int i;
+
+	debugf0(__FILE__ ": %s()\n", __func__);
+	for (i = 0; i < i7core_dev->n_devs; i++) {
+		struct pci_dev *pdev = i7core_dev->pdev[i];
+		if (!pdev)
+			continue;
+		debugf0("Removing dev %02x:%02x.%d\n",
+			pdev->bus->number,
+			PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn));
+		pci_dev_put(pdev);
+	}
+	kfree(i7core_dev->pdev);
+	list_del(&i7core_dev->list);
+	kfree(i7core_dev);
+}
+
+static void i7core_put_all_devices(void)
+{
+	struct i7core_dev *i7core_dev, *tmp;
+
+	list_for_each_entry_safe(i7core_dev, tmp, &i7core_edac_list, list)
+		i7core_put_devices(i7core_dev);
+}
+
+static void __init i7core_xeon_pci_fixup(struct pci_id_table *table)
+{
+	struct pci_dev *pdev = NULL;
+	int i;
+	/*
+	 * On Xeon 55xx, the Intel Quckpath Arch Generic Non-core pci buses
+	 * aren't announced by acpi. So, we need to use a legacy scan probing
+	 * to detect them
+	 */
+	while (table && table->descr) {
+		pdev = pci_get_device(PCI_VENDOR_ID_INTEL, table->descr[0].dev_id, NULL);
+		if (unlikely(!pdev)) {
+			for (i = 0; i < MAX_SOCKET_BUSES; i++)
+				pcibios_scan_specific_bus(255-i);
+		}
+		table++;
+	}
+}
+
+/*
+ *	i7core_get_devices	Find and perform 'get' operation on the MCH's
+ *			device/functions we want to reference for this driver
+ *
+ *			Need to 'get' device 16 func 1 and func 2
+ */
+int i7core_get_onedevice(struct pci_dev **prev, int devno,
+			 struct pci_id_descr *dev_descr, unsigned n_devs)
+{
+	struct i7core_dev *i7core_dev;
+
+	struct pci_dev *pdev = NULL;
+	u8 bus = 0;
+	u8 socket = 0;
+
+	pdev = pci_get_device(PCI_VENDOR_ID_INTEL,
+			      dev_descr->dev_id, *prev);
+
+	/*
+	 * On Xeon 55xx, the Intel Quckpath Arch Generic Non-core regs
+	 * is at addr 8086:2c40, instead of 8086:2c41. So, we need
+	 * to probe for the alternate address in case of failure
+	 */
+	if (dev_descr->dev_id == PCI_DEVICE_ID_INTEL_I7_NONCORE && !pdev)
+		pdev = pci_get_device(PCI_VENDOR_ID_INTEL,
+				      PCI_DEVICE_ID_INTEL_I7_NONCORE_ALT, *prev);
+
+	if (dev_descr->dev_id == PCI_DEVICE_ID_INTEL_LYNNFIELD_NONCORE && !pdev)
+		pdev = pci_get_device(PCI_VENDOR_ID_INTEL,
+				      PCI_DEVICE_ID_INTEL_LYNNFIELD_NONCORE_ALT,
+				      *prev);
+
+	if (!pdev) {
+		if (*prev) {
+			*prev = pdev;
+			return 0;
+		}
+
+		if (dev_descr->optional)
+			return 0;
+
+		if (devno == 0)
+			return -ENODEV;
+
+		i7core_printk(KERN_ERR,
+			"Device not found: dev %02x.%d PCI ID %04x:%04x\n",
+			dev_descr->dev, dev_descr->func,
+			PCI_VENDOR_ID_INTEL, dev_descr->dev_id);
+
+		/* End of list, leave */
+		return -ENODEV;
+	}
+	bus = pdev->bus->number;
+
+	if (bus == 0x3f)
+		socket = 0;
+	else
+		socket = 255 - bus;
+
+	i7core_dev = get_i7core_dev(socket);
+	if (!i7core_dev) {
+		i7core_dev = kzalloc(sizeof(*i7core_dev), GFP_KERNEL);
+		if (!i7core_dev)
+			return -ENOMEM;
+		i7core_dev->pdev = kzalloc(sizeof(*i7core_dev->pdev) * n_devs,
+					   GFP_KERNEL);
+		if (!i7core_dev->pdev) {
+			kfree(i7core_dev);
+			return -ENOMEM;
+		}
+		i7core_dev->socket = socket;
+		i7core_dev->n_devs = n_devs;
+		list_add_tail(&i7core_dev->list, &i7core_edac_list);
+	}
+
+	if (i7core_dev->pdev[devno]) {
+		i7core_printk(KERN_ERR,
+			"Duplicated device for "
+			"dev %02x:%02x.%d PCI ID %04x:%04x\n",
+			bus, dev_descr->dev, dev_descr->func,
+			PCI_VENDOR_ID_INTEL, dev_descr->dev_id);
+		pci_dev_put(pdev);
+		return -ENODEV;
+	}
+
+	i7core_dev->pdev[devno] = pdev;
+
+	/* Sanity check */
+	if (unlikely(PCI_SLOT(pdev->devfn) != dev_descr->dev ||
+			PCI_FUNC(pdev->devfn) != dev_descr->func)) {
+		i7core_printk(KERN_ERR,
+			"Device PCI ID %04x:%04x "
+			"has dev %02x:%02x.%d instead of dev %02x:%02x.%d\n",
+			PCI_VENDOR_ID_INTEL, dev_descr->dev_id,
+			bus, PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn),
+			bus, dev_descr->dev, dev_descr->func);
+		return -ENODEV;
+	}
+
+	/* Be sure that the device is enabled */
+	if (unlikely(pci_enable_device(pdev) < 0)) {
+		i7core_printk(KERN_ERR,
+			"Couldn't enable "
+			"dev %02x:%02x.%d PCI ID %04x:%04x\n",
+			bus, dev_descr->dev, dev_descr->func,
+			PCI_VENDOR_ID_INTEL, dev_descr->dev_id);
+		return -ENODEV;
+	}
+
+	debugf0("Detected socket %d dev %02x:%02x.%d PCI ID %04x:%04x\n",
+		socket, bus, dev_descr->dev,
+		dev_descr->func,
+		PCI_VENDOR_ID_INTEL, dev_descr->dev_id);
+
+	*prev = pdev;
+
+	return 0;
+}
+
+static int i7core_get_devices(struct pci_id_table *table)
+{
+	int i, rc;
+	struct pci_dev *pdev = NULL;
+	struct pci_id_descr *dev_descr;
+
+	while (table && table->descr) {
+		dev_descr = table->descr;
+		for (i = 0; i < table->n_devs; i++) {
+			pdev = NULL;
+			do {
+				rc = i7core_get_onedevice(&pdev, i, &dev_descr[i],
+							  table->n_devs);
+				if (rc < 0) {
+					if (i == 0) {
+						i = table->n_devs;
+						break;
+					}
+					i7core_put_all_devices();
+					return -ENODEV;
+				}
+			} while (pdev);
+		}
+		table++;
+	}
+
+	return 0;
+	return 0;
+}
+
+static int mci_bind_devs(struct mem_ctl_info *mci,
+			 struct i7core_dev *i7core_dev)
+{
+	struct i7core_pvt *pvt = mci->pvt_info;
+	struct pci_dev *pdev;
+	int i, func, slot;
+
+	/* Associates i7core_dev and mci for future usage */
+	pvt->i7core_dev = i7core_dev;
+	i7core_dev->mci = mci;
+
+	pvt->is_registered = 0;
+	for (i = 0; i < i7core_dev->n_devs; i++) {
+		pdev = i7core_dev->pdev[i];
+		if (!pdev)
+			continue;
+
+		func = PCI_FUNC(pdev->devfn);
+		slot = PCI_SLOT(pdev->devfn);
+		if (slot == 3) {
+			if (unlikely(func > MAX_MCR_FUNC))
+				goto error;
+			pvt->pci_mcr[func] = pdev;
+		} else if (likely(slot >= 4 && slot < 4 + NUM_CHANS)) {
+			if (unlikely(func > MAX_CHAN_FUNC))
+				goto error;
+			pvt->pci_ch[slot - 4][func] = pdev;
+		} else if (!slot && !func)
+			pvt->pci_noncore = pdev;
+		else
+			goto error;
+
+		debugf0("Associated fn %d.%d, dev = %p, socket %d\n",
+			PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn),
+			pdev, i7core_dev->socket);
+
+		if (PCI_SLOT(pdev->devfn) == 3 &&
+			PCI_FUNC(pdev->devfn) == 2)
+			pvt->is_registered = 1;
+	}
+
+	/*
+	 * Add extra nodes to count errors on udimm
+	 * For registered memory, this is not needed, since the counters
+	 * are already displayed at the standard locations
+	 */
+	if (!pvt->is_registered)
+		i7core_sysfs_attrs[ARRAY_SIZE(i7core_sysfs_attrs)-2].grp =
+			&i7core_udimm_counters;
+
+	return 0;
+
+error:
+	i7core_printk(KERN_ERR, "Device %d, function %d "
+		      "is out of the expected range\n",
+		      slot, func);
+	return -EINVAL;
+}
+
+/****************************************************************************
+			Error check routines
+ ****************************************************************************/
+static void i7core_rdimm_update_csrow(struct mem_ctl_info *mci,
+					 int chan, int dimm, int add)
+{
+	char *msg;
+	struct i7core_pvt *pvt = mci->pvt_info;
+	int row = pvt->csrow_map[chan][dimm], i;
+
+	for (i = 0; i < add; i++) {
+		msg = kasprintf(GFP_KERNEL, "Corrected error "
+				"(Socket=%d channel=%d dimm=%d)",
+				pvt->i7core_dev->socket, chan, dimm);
+
+		edac_mc_handle_fbd_ce(mci, row, 0, msg);
+		kfree (msg);
+	}
+}
+
+static void i7core_rdimm_update_ce_count(struct mem_ctl_info *mci,
+			int chan, int new0, int new1, int new2)
+{
+	struct i7core_pvt *pvt = mci->pvt_info;
+	int add0 = 0, add1 = 0, add2 = 0;
+	/* Updates CE counters if it is not the first time here */
+	if (pvt->ce_count_available) {
+		/* Updates CE counters */
+
+		add2 = new2 - pvt->rdimm_last_ce_count[chan][2];
+		add1 = new1 - pvt->rdimm_last_ce_count[chan][1];
+		add0 = new0 - pvt->rdimm_last_ce_count[chan][0];
+
+		if (add2 < 0)
+			add2 += 0x7fff;
+		pvt->rdimm_ce_count[chan][2] += add2;
+
+		if (add1 < 0)
+			add1 += 0x7fff;
+		pvt->rdimm_ce_count[chan][1] += add1;
+
+		if (add0 < 0)
+			add0 += 0x7fff;
+		pvt->rdimm_ce_count[chan][0] += add0;
+	} else
+		pvt->ce_count_available = 1;
+
+	/* Store the new values */
+	pvt->rdimm_last_ce_count[chan][2] = new2;
+	pvt->rdimm_last_ce_count[chan][1] = new1;
+	pvt->rdimm_last_ce_count[chan][0] = new0;
+
+	/*updated the edac core */
+	if (add0 != 0)
+		i7core_rdimm_update_csrow(mci, chan, 0, add0);
+	if (add1 != 0)
+		i7core_rdimm_update_csrow(mci, chan, 1, add1);
+	if (add2 != 0)
+		i7core_rdimm_update_csrow(mci, chan, 2, add2);
+
+}
+
+static void i7core_rdimm_check_mc_ecc_err(struct mem_ctl_info *mci)
+{
+	struct i7core_pvt *pvt = mci->pvt_info;
+	u32 rcv[3][2];
+	int i, new0, new1, new2;
+
+	/*Read DEV 3: FUN 2:  MC_COR_ECC_CNT regs directly*/
+	pci_read_config_dword(pvt->pci_mcr[2], MC_COR_ECC_CNT_0,
+								&rcv[0][0]);
+	pci_read_config_dword(pvt->pci_mcr[2], MC_COR_ECC_CNT_1,
+								&rcv[0][1]);
+	pci_read_config_dword(pvt->pci_mcr[2], MC_COR_ECC_CNT_2,
+								&rcv[1][0]);
+	pci_read_config_dword(pvt->pci_mcr[2], MC_COR_ECC_CNT_3,
+								&rcv[1][1]);
+	pci_read_config_dword(pvt->pci_mcr[2], MC_COR_ECC_CNT_4,
+								&rcv[2][0]);
+	pci_read_config_dword(pvt->pci_mcr[2], MC_COR_ECC_CNT_5,
+								&rcv[2][1]);
+	for (i = 0 ; i < 3; i++) {
+		debugf3("MC_COR_ECC_CNT%d = 0x%x; MC_COR_ECC_CNT%d = 0x%x\n",
+			(i * 2), rcv[i][0], (i * 2) + 1, rcv[i][1]);
+		/*if the channel has 3 dimms*/
+		if (pvt->channel[i].dimms > 2) {
+			new0 = DIMM_BOT_COR_ERR(rcv[i][0]);
+			new1 = DIMM_TOP_COR_ERR(rcv[i][0]);
+			new2 = DIMM_BOT_COR_ERR(rcv[i][1]);
+		} else {
+			new0 = DIMM_TOP_COR_ERR(rcv[i][0]) +
+					DIMM_BOT_COR_ERR(rcv[i][0]);
+			new1 = DIMM_TOP_COR_ERR(rcv[i][1]) +
+					DIMM_BOT_COR_ERR(rcv[i][1]);
+			new2 = 0;
+		}
+
+		i7core_rdimm_update_ce_count(mci, i, new0, new1, new2);
+	}
+}
+
+/* This function is based on the device 3 function 4 registers as described on:
+ * Intel Xeon Processor 5500 Series Datasheet Volume 2
+ *	http://www.intel.com/Assets/PDF/datasheet/321322.pdf
+ * also available at:
+ * 	http://www.arrownac.com/manufacturers/intel/s/nehalem/5500-datasheet-v2.pdf
+ */
+static void i7core_udimm_check_mc_ecc_err(struct mem_ctl_info *mci)
+{
+	struct i7core_pvt *pvt = mci->pvt_info;
+	u32 rcv1, rcv0;
+	int new0, new1, new2;
+
+	if (!pvt->pci_mcr[4]) {
+		debugf0("%s MCR registers not found\n", __func__);
+		return;
+	}
+
+	/* Corrected test errors */
+	pci_read_config_dword(pvt->pci_mcr[4], MC_TEST_ERR_RCV1, &rcv1);
+	pci_read_config_dword(pvt->pci_mcr[4], MC_TEST_ERR_RCV0, &rcv0);
+
+	/* Store the new values */
+	new2 = DIMM2_COR_ERR(rcv1);
+	new1 = DIMM1_COR_ERR(rcv0);
+	new0 = DIMM0_COR_ERR(rcv0);
+
+	/* Updates CE counters if it is not the first time here */
+	if (pvt->ce_count_available) {
+		/* Updates CE counters */
+		int add0, add1, add2;
+
+		add2 = new2 - pvt->udimm_last_ce_count[2];
+		add1 = new1 - pvt->udimm_last_ce_count[1];
+		add0 = new0 - pvt->udimm_last_ce_count[0];
+
+		if (add2 < 0)
+			add2 += 0x7fff;
+		pvt->udimm_ce_count[2] += add2;
+
+		if (add1 < 0)
+			add1 += 0x7fff;
+		pvt->udimm_ce_count[1] += add1;
+
+		if (add0 < 0)
+			add0 += 0x7fff;
+		pvt->udimm_ce_count[0] += add0;
+
+		if (add0 | add1 | add2)
+			i7core_printk(KERN_ERR, "New Corrected error(s): "
+				      "dimm0: +%d, dimm1: +%d, dimm2 +%d\n",
+				      add0, add1, add2);
+	} else
+		pvt->ce_count_available = 1;
+
+	/* Store the new values */
+	pvt->udimm_last_ce_count[2] = new2;
+	pvt->udimm_last_ce_count[1] = new1;
+	pvt->udimm_last_ce_count[0] = new0;
+}
+
+/*
+ * According with tables E-11 and E-12 of chapter E.3.3 of Intel 64 and IA-32
+ * Architectures Software Developer’s Manual Volume 3B.
+ * Nehalem are defined as family 0x06, model 0x1a
+ *
+ * The MCA registers used here are the following ones:
+ *     struct mce field	MCA Register
+ *     m->status	MSR_IA32_MC8_STATUS
+ *     m->addr		MSR_IA32_MC8_ADDR
+ *     m->misc		MSR_IA32_MC8_MISC
+ * In the case of Nehalem, the error information is masked at .status and .misc
+ * fields
+ */
+static void i7core_mce_output_error(struct mem_ctl_info *mci,
+				    struct mce *m)
+{
+	struct i7core_pvt *pvt = mci->pvt_info;
+	char *type, *optype, *err, *msg;
+	unsigned long error = m->status & 0x1ff0000l;
+	u32 optypenum = (m->status >> 4) & 0x07;
+	u32 core_err_cnt = (m->status >> 38) && 0x7fff;
+	u32 dimm = (m->misc >> 16) & 0x3;
+	u32 channel = (m->misc >> 18) & 0x3;
+	u32 syndrome = m->misc >> 32;
+	u32 errnum = find_first_bit(&error, 32);
+	int csrow;
+
+	if (m->mcgstatus & 1)
+		type = "FATAL";
+	else
+		type = "NON_FATAL";
+
+	switch (optypenum) {
+	case 0:
+		optype = "generic undef request";
+		break;
+	case 1:
+		optype = "read error";
+		break;
+	case 2:
+		optype = "write error";
+		break;
+	case 3:
+		optype = "addr/cmd error";
+		break;
+	case 4:
+		optype = "scrubbing error";
+		break;
+	default:
+		optype = "reserved";
+		break;
+	}
+
+	switch (errnum) {
+	case 16:
+		err = "read ECC error";
+		break;
+	case 17:
+		err = "RAS ECC error";
+		break;
+	case 18:
+		err = "write parity error";
+		break;
+	case 19:
+		err = "redundacy loss";
+		break;
+	case 20:
+		err = "reserved";
+		break;
+	case 21:
+		err = "memory range error";
+		break;
+	case 22:
+		err = "RTID out of range";
+		break;
+	case 23:
+		err = "address parity error";
+		break;
+	case 24:
+		err = "byte enable parity error";
+		break;
+	default:
+		err = "unknown";
+	}
+
+	/* FIXME: should convert addr into bank and rank information */
+	msg = kasprintf(GFP_ATOMIC,
+		"%s (addr = 0x%08llx, cpu=%d, Dimm=%d, Channel=%d, "
+		"syndrome=0x%08x, count=%d, Err=%08llx:%08llx (%s: %s))\n",
+		type, (long long) m->addr, m->cpu, dimm, channel,
+		syndrome, core_err_cnt, (long long)m->status,
+		(long long)m->misc, optype, err);
+
+	debugf0("%s", msg);
+
+	csrow = pvt->csrow_map[channel][dimm];
+
+	/* Call the helper to output message */
+	if (m->mcgstatus & 1)
+		edac_mc_handle_fbd_ue(mci, csrow, 0,
+				0 /* FIXME: should be channel here */, msg);
+	else if (!pvt->is_registered)
+		edac_mc_handle_fbd_ce(mci, csrow,
+				0 /* FIXME: should be channel here */, msg);
+
+	kfree(msg);
+}
+
+/*
+ *	i7core_check_error	Retrieve and process errors reported by the
+ *				hardware. Called by the Core module.
+ */
+static void i7core_check_error(struct mem_ctl_info *mci)
+{
+	struct i7core_pvt *pvt = mci->pvt_info;
+	int i;
+	unsigned count = 0;
+	struct mce *m;
+
+	/*
+	 * MCE first step: Copy all mce errors into a temporary buffer
+	 * We use a double buffering here, to reduce the risk of
+	 * loosing an error.
+	 */
+	smp_rmb();
+	count = (pvt->mce_out + MCE_LOG_LEN - pvt->mce_in)
+		% MCE_LOG_LEN;
+	if (!count)
+		goto check_ce_error;
+
+	m = pvt->mce_outentry;
+	if (pvt->mce_in + count > MCE_LOG_LEN) {
+		unsigned l = MCE_LOG_LEN - pvt->mce_in;
+
+		memcpy(m, &pvt->mce_entry[pvt->mce_in], sizeof(*m) * l);
+		smp_wmb();
+		pvt->mce_in = 0;
+		count -= l;
+		m += l;
+	}
+	memcpy(m, &pvt->mce_entry[pvt->mce_in], sizeof(*m) * count);
+	smp_wmb();
+	pvt->mce_in += count;
+
+	smp_rmb();
+	if (pvt->mce_overrun) {
+		i7core_printk(KERN_ERR, "Lost %d memory errors\n",
+			      pvt->mce_overrun);
+		smp_wmb();
+		pvt->mce_overrun = 0;
+	}
+
+	/*
+	 * MCE second step: parse errors and display
+	 */
+	for (i = 0; i < count; i++)
+		i7core_mce_output_error(mci, &pvt->mce_outentry[i]);
+
+	/*
+	 * Now, let's increment CE error counts
+	 */
+check_ce_error:
+	if (!pvt->is_registered)
+		i7core_udimm_check_mc_ecc_err(mci);
+	else
+		i7core_rdimm_check_mc_ecc_err(mci);
+}
+
+/*
+ * i7core_mce_check_error	Replicates mcelog routine to get errors
+ *				This routine simply queues mcelog errors, and
+ *				return. The error itself should be handled later
+ *				by i7core_check_error.
+ * WARNING: As this routine should be called at NMI time, extra care should
+ * be taken to avoid deadlocks, and to be as fast as possible.
+ */
+static int i7core_mce_check_error(void *priv, struct mce *mce)
+{
+	struct mem_ctl_info *mci = priv;
+	struct i7core_pvt *pvt = mci->pvt_info;
+
+	/*
+	 * Just let mcelog handle it if the error is
+	 * outside the memory controller
+	 */
+	if (((mce->status & 0xffff) >> 7) != 1)
+		return 0;
+
+	/* Bank 8 registers are the only ones that we know how to handle */
+	if (mce->bank != 8)
+		return 0;
+
+#ifdef CONFIG_SMP
+	/* Only handle if it is the right mc controller */
+	if (cpu_data(mce->cpu).phys_proc_id != pvt->i7core_dev->socket)
+		return 0;
+#endif
+
+	smp_rmb();
+	if ((pvt->mce_out + 1) % MCE_LOG_LEN == pvt->mce_in) {
+		smp_wmb();
+		pvt->mce_overrun++;
+		return 0;
+	}
+
+	/* Copy memory error at the ringbuffer */
+	memcpy(&pvt->mce_entry[pvt->mce_out], mce, sizeof(*mce));
+	smp_wmb();
+	pvt->mce_out = (pvt->mce_out + 1) % MCE_LOG_LEN;
+
+	/* Handle fatal errors immediately */
+	if (mce->mcgstatus & 1)
+		i7core_check_error(mci);
+
+	/* Advice mcelog that the error were handled */
+	return 1;
+}
+
+static int i7core_register_mci(struct i7core_dev *i7core_dev,
+			       int num_channels, int num_csrows)
+{
+	struct mem_ctl_info *mci;
+	struct i7core_pvt *pvt;
+	int csrow = 0;
+	int rc;
+
+	/* allocate a new MC control structure */
+	mci = edac_mc_alloc(sizeof(*pvt), num_csrows, num_channels,
+			    i7core_dev->socket);
+	if (unlikely(!mci))
+		return -ENOMEM;
+
+	debugf0("MC: " __FILE__ ": %s(): mci = %p\n", __func__, mci);
+
+	/* record ptr to the generic device */
+	mci->dev = &i7core_dev->pdev[0]->dev;
+
+	pvt = mci->pvt_info;
+	memset(pvt, 0, sizeof(*pvt));
+
+	/*
+	 * FIXME: how to handle RDDR3 at MCI level? It is possible to have
+	 * Mixed RDDR3/UDDR3 with Nehalem, provided that they are on different
+	 * memory channels
+	 */
+	mci->mtype_cap = MEM_FLAG_DDR3;
+	mci->edac_ctl_cap = EDAC_FLAG_NONE;
+	mci->edac_cap = EDAC_FLAG_NONE;
+	mci->mod_name = "i7core_edac.c";
+	mci->mod_ver = I7CORE_REVISION;
+	mci->ctl_name = kasprintf(GFP_KERNEL, "i7 core #%d",
+				  i7core_dev->socket);
+	mci->dev_name = pci_name(i7core_dev->pdev[0]);
+	mci->ctl_page_to_phys = NULL;
+	mci->mc_driver_sysfs_attributes = i7core_sysfs_attrs;
+	/* Set the function pointer to an actual operation function */
+	mci->edac_check = i7core_check_error;
+
+	/* Store pci devices at mci for faster access */
+	rc = mci_bind_devs(mci, i7core_dev);
+	if (unlikely(rc < 0))
+		goto fail;
+
+	/* Get dimm basic config */
+	get_dimm_config(mci, &csrow);
+
+	/* add this new MC control structure to EDAC's list of MCs */
+	if (unlikely(edac_mc_add_mc(mci))) {
+		debugf0("MC: " __FILE__
+			": %s(): failed edac_mc_add_mc()\n", __func__);
+		/* FIXME: perhaps some code should go here that disables error
+		 * reporting if we just enabled it
+		 */
+
+		rc = -EINVAL;
+		goto fail;
+	}
+
+	/* allocating generic PCI control info */
+	i7core_pci = edac_pci_create_generic_ctl(&i7core_dev->pdev[0]->dev,
+						 EDAC_MOD_STR);
+	if (unlikely(!i7core_pci)) {
+		printk(KERN_WARNING
+			"%s(): Unable to create PCI control\n",
+			__func__);
+		printk(KERN_WARNING
+			"%s(): PCI error report via EDAC not setup\n",
+			__func__);
+	}
+
+	/* Default error mask is any memory */
+	pvt->inject.channel = 0;
+	pvt->inject.dimm = -1;
+	pvt->inject.rank = -1;
+	pvt->inject.bank = -1;
+	pvt->inject.page = -1;
+	pvt->inject.col = -1;
+
+	/* Registers on edac_mce in order to receive memory errors */
+	pvt->edac_mce.priv = mci;
+	pvt->edac_mce.check_error = i7core_mce_check_error;
+
+	rc = edac_mce_register(&pvt->edac_mce);
+	if (unlikely(rc < 0)) {
+		debugf0("MC: " __FILE__
+			": %s(): failed edac_mce_register()\n", __func__);
+	}
+
+fail:
+	if (rc < 0)
+		edac_mc_free(mci);
+	return rc;
+}
+
+/*
+ *	i7core_probe	Probe for ONE instance of device to see if it is
+ *			present.
+ *	return:
+ *		0 for FOUND a device
+ *		< 0 for error code
+ */
+static int __devinit i7core_probe(struct pci_dev *pdev,
+				  const struct pci_device_id *id)
+{
+	int dev_idx = id->driver_data;
+	int rc;
+	struct i7core_dev *i7core_dev;
+
+	/*
+	 * All memory controllers are allocated at the first pass.
+	 */
+	if (unlikely(dev_idx >= 1))
+		return -EINVAL;
+
+	/* get the pci devices we want to reserve for our use */
+	mutex_lock(&i7core_edac_lock);
+
+	rc = i7core_get_devices(pci_dev_table);
+	if (unlikely(rc < 0))
+		goto fail0;
+
+	list_for_each_entry(i7core_dev, &i7core_edac_list, list) {
+		int channels;
+		int csrows;
+
+		/* Check the number of active and not disabled channels */
+		rc = i7core_get_active_channels(i7core_dev->socket,
+						&channels, &csrows);
+		if (unlikely(rc < 0))
+			goto fail1;
+
+		rc = i7core_register_mci(i7core_dev, channels, csrows);
+		if (unlikely(rc < 0))
+			goto fail1;
+	}
+
+	i7core_printk(KERN_INFO, "Driver loaded.\n");
+
+	mutex_unlock(&i7core_edac_lock);
+	return 0;
+
+fail1:
+	i7core_put_all_devices();
+fail0:
+	mutex_unlock(&i7core_edac_lock);
+	return rc;
+}
+
+/*
+ *	i7core_remove	destructor for one instance of device
+ *
+ */
+static void __devexit i7core_remove(struct pci_dev *pdev)
+{
+	struct mem_ctl_info *mci;
+	struct i7core_dev *i7core_dev, *tmp;
+
+	debugf0(__FILE__ ": %s()\n", __func__);
+
+	if (i7core_pci)
+		edac_pci_release_generic_ctl(i7core_pci);
+
+	/*
+	 * we have a trouble here: pdev value for removal will be wrong, since
+	 * it will point to the X58 register used to detect that the machine
+	 * is a Nehalem or upper design. However, due to the way several PCI
+	 * devices are grouped together to provide MC functionality, we need
+	 * to use a different method for releasing the devices
+	 */
+
+	mutex_lock(&i7core_edac_lock);
+	list_for_each_entry_safe(i7core_dev, tmp, &i7core_edac_list, list) {
+		mci = edac_mc_del_mc(&i7core_dev->pdev[0]->dev);
+		if (mci) {
+			struct i7core_pvt *pvt = mci->pvt_info;
+
+			i7core_dev = pvt->i7core_dev;
+			edac_mce_unregister(&pvt->edac_mce);
+			kfree(mci->ctl_name);
+			edac_mc_free(mci);
+			i7core_put_devices(i7core_dev);
+		} else {
+			i7core_printk(KERN_ERR,
+				      "Couldn't find mci for socket %d\n",
+				      i7core_dev->socket);
+		}
+	}
+	mutex_unlock(&i7core_edac_lock);
+}
+
+MODULE_DEVICE_TABLE(pci, i7core_pci_tbl);
+
+/*
+ *	i7core_driver	pci_driver structure for this module
+ *
+ */
+static struct pci_driver i7core_driver = {
+	.name     = "i7core_edac",
+	.probe    = i7core_probe,
+	.remove   = __devexit_p(i7core_remove),
+	.id_table = i7core_pci_tbl,
+};
+
+/*
+ *	i7core_init		Module entry function
+ *			Try to initialize this module for its devices
+ */
+static int __init i7core_init(void)
+{
+	int pci_rc;
+
+	debugf2("MC: " __FILE__ ": %s()\n", __func__);
+
+	/* Ensure that the OPSTATE is set correctly for POLL or NMI */
+	opstate_init();
+
+	i7core_xeon_pci_fixup(pci_dev_table);
+
+	pci_rc = pci_register_driver(&i7core_driver);
+
+	if (pci_rc >= 0)
+		return 0;
+
+	i7core_printk(KERN_ERR, "Failed to register device with error %d.\n",
+		      pci_rc);
+
+	return pci_rc;
+}
+
+/*
+ *	i7core_exit()	Module exit function
+ *			Unregister the driver
+ */
+static void __exit i7core_exit(void)
+{
+	debugf2("MC: " __FILE__ ": %s()\n", __func__);
+	pci_unregister_driver(&i7core_driver);
+}
+
+module_init(i7core_init);
+module_exit(i7core_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <[e-mail]>");
+MODULE_AUTHOR("Red Hat Inc. (http://www.redhat.com)");
+MODULE_DESCRIPTION("MC Driver for Intel i7 Core memory controllers - "
+		   I7CORE_REVISION);
+
+module_param(edac_op_state, int, 0444);
+MODULE_PARM_DESC(edac_op_state, "EDAC Error Reporting state: 0=Poll,1=NMI");

include/linux/edac_mce.h

···
+/* Provides edac interface to mcelog events
+ *
+ * This file may be distributed under the terms of the
+ * GNU General Public License version 2.
+ *
+ * Copyright (c) 2009 by:
+ *	 Mauro Carvalho Chehab <[e-mail]>
+ *
+ * Red Hat Inc. http://www.redhat.com
+ */
+
+#if defined(CONFIG_EDAC_MCE) || \
+			(defined(CONFIG_EDAC_MCE_MODULE) && defined(MODULE))
+
+#include <asm/mce.h>
+#include <linux/list.h>
+
+struct edac_mce {
+	struct list_head list;
+
+	void *priv;
+	int (*check_error)(void *priv, struct mce *mce);
+};
+
+int edac_mce_register(struct edac_mce *edac_mce);
+void edac_mce_unregister(struct edac_mce *edac_mce);
+int edac_mce_parse(struct mce *mce);
+
+#else
+#define edac_mce_parse(mce) (0)
+#endif

include/linux/pci.h

···
 
 /* Generic PCI functions used internally */
 
+void pcibios_scan_specific_bus(int busn);
 extern struct pci_bus *pci_find_bus(int domain, int busnr);
 void pci_bus_add_devices(const struct pci_bus *bus);
 struct pci_bus *pci_scan_bus_parented(struct device *parent, int bus,

include/linux/pci_ids.h

···
 #define PCI_DEVICE_ID_INTEL_ICH9_6	0x2930
 #define PCI_DEVICE_ID_INTEL_ICH9_7	0x2916
 #define PCI_DEVICE_ID_INTEL_ICH9_8	0x2918
+#define PCI_DEVICE_ID_INTEL_I7_MCR	0x2c18
+#define PCI_DEVICE_ID_INTEL_I7_MC_TAD	0x2c19
+#define PCI_DEVICE_ID_INTEL_I7_MC_RAS	0x2c1a
+#define PCI_DEVICE_ID_INTEL_I7_MC_TEST	0x2c1c
+#define PCI_DEVICE_ID_INTEL_I7_MC_CH0_CTRL  0x2c20
+#define PCI_DEVICE_ID_INTEL_I7_MC_CH0_ADDR  0x2c21
+#define PCI_DEVICE_ID_INTEL_I7_MC_CH0_RANK  0x2c22
+#define PCI_DEVICE_ID_INTEL_I7_MC_CH0_TC    0x2c23
+#define PCI_DEVICE_ID_INTEL_I7_MC_CH1_CTRL  0x2c28
+#define PCI_DEVICE_ID_INTEL_I7_MC_CH1_ADDR  0x2c29
+#define PCI_DEVICE_ID_INTEL_I7_MC_CH1_RANK  0x2c2a
+#define PCI_DEVICE_ID_INTEL_I7_MC_CH1_TC    0x2c2b
+#define PCI_DEVICE_ID_INTEL_I7_MC_CH2_CTRL  0x2c30
+#define PCI_DEVICE_ID_INTEL_I7_MC_CH2_ADDR  0x2c31
+#define PCI_DEVICE_ID_INTEL_I7_MC_CH2_RANK  0x2c32
+#define PCI_DEVICE_ID_INTEL_I7_MC_CH2_TC    0x2c33
+#define PCI_DEVICE_ID_INTEL_I7_NONCORE	0x2c41
+#define PCI_DEVICE_ID_INTEL_I7_NONCORE_ALT 0x2c40
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_NONCORE     0x2c50
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_NONCORE_ALT 0x2c51
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_NONCORE_REV2 0x2c70
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_SAD         0x2c81
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_QPI_LINK0   0x2c90
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_QPI_PHY0    0x2c91
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MCR         0x2c98
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_TAD      0x2c99
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_TEST     0x2c9C
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_CTRL 0x2ca0
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_ADDR 0x2ca1
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_RANK 0x2ca2
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_TC   0x2ca3
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_CTRL 0x2ca8
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_ADDR 0x2ca9
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_RANK 0x2caa
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_TC   0x2cab
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MCR_REV2          0x2d98
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_TAD_REV2       0x2d99
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_RAS_REV2       0x2d9a
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_TEST_REV2      0x2d9c
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_CTRL_REV2  0x2da0
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_ADDR_REV2  0x2da1
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_RANK_REV2  0x2da2
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_TC_REV2    0x2da3
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_CTRL_REV2  0x2da8
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_ADDR_REV2  0x2da9
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_RANK_REV2  0x2daa
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_TC_REV2    0x2dab
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH2_CTRL_REV2  0x2db0
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH2_ADDR_REV2  0x2db1
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH2_RANK_REV2  0x2db2
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH2_TC_REV2    0x2db3
 #define PCI_DEVICE_ID_INTEL_82855PM_HB	0x3340
 #define PCI_DEVICE_ID_INTEL_IOAT_TBG4	0x3429
 #define PCI_DEVICE_ID_INTEL_IOAT_TBG5	0x342a
 #define PCI_DEVICE_ID_INTEL_IOAT_TBG6	0x342b
 #define PCI_DEVICE_ID_INTEL_IOAT_TBG7	0x342c
+#define PCI_DEVICE_ID_INTEL_X58_HUB_MGMT 0x342e
 #define PCI_DEVICE_ID_INTEL_IOAT_TBG0	0x3430
 #define PCI_DEVICE_ID_INTEL_IOAT_TBG1	0x3431
 #define PCI_DEVICE_ID_INTEL_IOAT_TBG2	0x3432