PCI: add D3 power state avoidance quirk

Libata has some hacks to deal with certain controllers going silly in D3
state. The right way to handle this is to keep a PCI device flag for
such devices. That can then be generalised for no ATA devices with power
problems.

Signed-off-by: Alan Cox <[e-mail]>
Signed-off-by: Jesse Barnes <[e-mail]>

drivers/pci/pci.c

···
 		if (!ret)
 			pci_update_current_state(dev);
 	}
+	/* This device is quirked not to be put into D3, so
+	   don't put it in D3 */
+	if (state == PCI_D3hot && (dev->dev_flags & PCI_DEV_FLAGS_NO_D3))
+		return 0;
 
 	error = pci_raw_set_power_state(dev, state);
 

drivers/pci/quirks.c

···
 }
 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_10, quirk_ide_samemode);
 
+/*
+ * Some ATA devices break if put into D3
+ */
+
+static void __devinit quirk_no_ata_d3(struct pci_dev *pdev)
+{
+	/* Quirk the legacy ATA devices only. The AHCI ones are ok */
+	if ((pdev->class >> 8) == PCI_CLASS_STORAGE_IDE)
+		pdev->dev_flags |= PCI_DEV_FLAGS_NO_D3;
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SERVERWORKS, PCI_ANY_ID, quirk_no_ata_d3);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_ATI, PCI_ANY_ID, quirk_no_ata_d3);
+
 /* This was originally an Alpha specific thing, but it really fits here.
  * The i82375 PCI/EISA bridge appears as non-classified. Fix that.
  */

include/linux/pci.h

···
 	 * generation too.
 	 */
 	PCI_DEV_FLAGS_MSI_INTX_DISABLE_BUG = (__force pci_dev_flags_t) 1,
+	/* Device configuration is irrevocably lost if disabled into D3 */
+	PCI_DEV_FLAGS_NO_D3 = (__force pci_dev_flags_t) 2,
 };
 
 typedef unsigned short __bitwise pci_bus_flags_t;