Merge tag 'boards-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC board changes from Arnd Bergmann:
"As we continue to replace board files with device tree descriptions,
this part of the ARM support is getting smaller. We have basically
just defconfig changes here this time, and a significant number of
Renesas shmobile changes, as Renesas is still in the process of
deprecating board file support"

* tag 'boards-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (92 commits)
ARM: enable fhandle in multi_v7_defconfig
ARM: tegra: enable fhandle in tegra_defconfig
ARM: update multi_v7_defconfig for Tegra
ARM: add Marvell Dove and some drivers to multi_v7 defconfig
ARM: fix duplicate symbols in multi_v5_defconfig
ARM: pxa: add gpio keys information
ARM: tegra: defconfig updates
ARM: config: keystone: enable AEMIF/NAND support
ARM: qcom: Enable basic support for Qualcomm platforms in multi_v7_defconfig
ARM: kirkwood: Add HP T5325 devices to {multi|mvebu}_v5_defconfig
ARM: config: Add mvebu_v5_defconfig
ARM: config: Add a multi_v5_defconfig
ARM: shmobile: r7s72100: update defconfig for I2C usage
ARM: shmobile: Remove Lager DT reference legacy clock bits
ARM: shmobile: Remove Koelsch DT reference legacy clock bits
ARM: shmobile: Remove KZM9D board code
ARM: mvebu: update defconfigs for Armada 375 and 38x
ARM: dove: Enable watchdog support in the defconfig
ARM: mvebu: Enable watchdog support in defconfig
ARM: config: keystone: enable led support
...

arch/arm/boot/dts/r8a7778-bockw-reference.dts

···
 /dts-v1/;
 #include "r8a7778.dtsi"
 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	model = "bockw";
···
 
 	sdhi0_pins: sd0 {
 		renesas,groups = "sdhi0_data4", "sdhi0_ctrl",
-				  "sdhi0_cd", "sdhi0_wp";
+				  "sdhi0_cd";
 		renesas,function = "sdhi0";
 	};
 
···
 	vmmc-supply = <&fixedregulator3v3>;
 	bus-width = <4>;
 	status = "okay";
+	wp-gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>;
 };
 
 &hspi0 {

arch/arm/configs/ape6evm_defconfig

···
 # CONFIG_IPV6_SIT is not set
 CONFIG_NETFILTER=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
 # CONFIG_FW_LOADER_USER_HELPER is not set
 CONFIG_NETDEVICES=y
 # CONFIG_NET_CADENCE is not set

arch/arm/configs/armadillo800eva_defconfig

···
 # CONFIG_IPV6 is not set
 # CONFIG_WIRELESS is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_MD=y

arch/arm/configs/bockw_defconfig

···
 # CONFIG_INET_DIAG is not set
 # CONFIG_IPV6 is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
 # CONFIG_STANDALONE is not set
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_FW_LOADER is not set

arch/arm/configs/dove_defconfig

···
 CONFIG_MTD_CFI_STAA=y
 CONFIG_MTD_PHYSMAP=y
 CONFIG_MTD_M25P80=y
-CONFIG_MTD_UBI=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=1
···
 # CONFIG_HWMON is not set
 CONFIG_THERMAL=y
 CONFIG_DOVE_THERMAL=y
+CONFIG_WATCHDOG=y
+CONFIG_ORION_WATCHDOG=y
 CONFIG_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_EHCI_HCD=y

arch/arm/configs/genmai_defconfig

···
 # CONFIG_IPV6 is not set
 # CONFIG_WIRELESS is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_EEPROM_AT24=y
 CONFIG_NETDEVICES=y
 # CONFIG_NET_CORE is not set
 # CONFIG_NET_VENDOR_ARC is not set
···
 CONFIG_SERIAL_SH_SCI_NR_UARTS=10
 CONFIG_SERIAL_SH_SCI_CONSOLE=y
 # CONFIG_HW_RANDOM is not set
-CONFIG_I2C_SH_MOBILE=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_RIIC=y
+CONFIG_SPI=y
+CONFIG_SPI_RSPI=y
 # CONFIG_HWMON is not set
 CONFIG_THERMAL=y
 CONFIG_RCAR_THERMAL=y

arch/arm/configs/keystone_defconfig

···
 CONFIG_MTD_PLATRAM=y
 CONFIG_MTD_M25P80=y
 CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_DAVINCI=y
 CONFIG_MTD_UBI=y
 CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_LOOP=y
···
 CONFIG_SPI_SPIDEV=y
 # CONFIG_HWMON is not set
 CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_CORE=y
+CONFIG_DAVINCI_WATCHDOG=y
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
···
 CONFIG_TI_EDMA=y
 CONFIG_COMMON_CLK_DEBUG=y
 CONFIG_MEMORY=y
+CONFIG_TI_AEMIF=y
 CONFIG_EXT4_FS=y
 CONFIG_EXT4_FS_POSIX_ACL=y
 CONFIG_MSDOS_FS=y
···
 CONFIG_CRYPTO_ANSI_CPRNG=y
 CONFIG_CRYPTO_USER_API_HASH=y
 CONFIG_CRYPTO_USER_API_SKCIPHER=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_DAVINCI=y
+CONFIG_LEDS_CLASS=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_ONESHOT=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_BACKLIGHT=y
+CONFIG_LEDS_TRIGGER_GPIO=y

arch/arm/configs/koelsch_defconfig

···
 CONFIG_EMBEDDED=y
 CONFIG_PERF_EVENTS=y
 CONFIG_SLAB=y
-# CONFIG_BLOCK is not set
 CONFIG_ARCH_SHMOBILE_LEGACY=y
 CONFIG_ARCH_R8A7791=y
 CONFIG_MACH_KOELSCH=y
···
 CONFIG_INET=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_BLK_DEV_SD=y
+CONFIG_ATA=y
+CONFIG_SATA_RCAR=y
+CONFIG_MTD=y
+CONFIG_MTD_M25P80=y
 CONFIG_NETDEVICES=y
 # CONFIG_NET_VENDOR_ARC is not set
 # CONFIG_NET_CADENCE is not set
···
 # CONFIG_NET_VENDOR_VIA is not set
 # CONFIG_NET_VENDOR_WIZNET is not set
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_KEYBOARD_GPIO=y
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_LEGACY_PTYS is not set
 CONFIG_SERIAL_SH_SCI=y
 CONFIG_SERIAL_SH_SCI_NR_UARTS=20
 CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_I2C=y
+CONFIG_I2C_RCAR=y
+CONFIG_SPI=y
+CONFIG_SPI_RSPI=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_RCAR=y
 # CONFIG_HWMON is not set
 CONFIG_THERMAL=y
 CONFIG_RCAR_THERMAL=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_REGULATOR_GPIO=y
 # CONFIG_HID is not set
 # CONFIG_USB_SUPPORT is not set
+CONFIG_MMC=y
+CONFIG_MMC_SDHI=y
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
 # CONFIG_IOMMU_SUPPORT is not set
 # CONFIG_DNOTIFY is not set
 CONFIG_TMPFS=y

arch/arm/configs/kzm9d_defconfig

···
-# CONFIG_ARM_PATCH_PHYS_VIRT is not set
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_NO_HZ=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=16
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_EMBEDDED=y
-CONFIG_PERF_EVENTS=y
-CONFIG_SLAB=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_SHMOBILE_LEGACY=y
-CONFIG_ARCH_EMEV2=y
-CONFIG_MACH_KZM9D=y
-CONFIG_MEMORY_START=0x40000000
-CONFIG_MEMORY_SIZE=0x10000000
-# CONFIG_SH_TIMER_TMU is not set
-# CONFIG_SWP_EMULATE is not set
-# CONFIG_CACHE_L2X0 is not set
-CONFIG_SMP=y
-CONFIG_NR_CPUS=2
-CONFIG_HOTPLUG_CPU=y
-# CONFIG_LOCAL_TIMERS is not set
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-# CONFIG_CROSS_MEMORY_ATTACH is not set
-CONFIG_FORCE_MAX_ZONEORDER=13
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_ARM_APPENDED_DTB=y
-CONFIG_AUTO_ZRELADDR=y
-CONFIG_VFP=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_PM_RUNTIME=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_WIRELESS is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_BLK_DEV is not set
-CONFIG_NETDEVICES=y
-# CONFIG_NET_VENDOR_BROADCOM is not set
-# CONFIG_NET_VENDOR_CHELSIO is not set
-# CONFIG_NET_VENDOR_CIRRUS is not set
-# CONFIG_NET_VENDOR_FARADAY is not set
-# CONFIG_NET_VENDOR_INTEL is not set
-# CONFIG_NET_VENDOR_MARVELL is not set
-# CONFIG_NET_VENDOR_MICREL is not set
-# CONFIG_NET_VENDOR_NATSEMI is not set
-# CONFIG_NET_VENDOR_SEEQ is not set
-CONFIG_SMSC911X=y
-# CONFIG_NET_VENDOR_STMICRO is not set
-# CONFIG_NET_VENDOR_WIZNET is not set
-# CONFIG_WLAN is not set
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_DEVKMEM is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_EM=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_EM=y
-# CONFIG_HWMON is not set
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-# CONFIG_IOMMU_SUPPORT is not set
-# CONFIG_DNOTIFY is not set
-CONFIG_TMPFS=y
-# CONFIG_MISC_FILESYSTEMS is not set
-CONFIG_NFS_FS=y
-CONFIG_ROOT_NFS=y
-# CONFIG_FTRACE is not set

arch/arm/configs/kzm9g_defconfig

···
 CONFIG_SH_IRDA=y
 # CONFIG_WIRELESS is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_NETDEVICES=y

arch/arm/configs/lager_defconfig

···
 # CONFIG_IPV6 is not set
 # CONFIG_WIRELESS is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_MTD=y
+CONFIG_MTD_M25P80=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_ATA=y
+CONFIG_SATA_RCAR=y
 CONFIG_NETDEVICES=y
 # CONFIG_NET_CORE is not set
 # CONFIG_NET_VENDOR_ARC is not set
···
 CONFIG_I2C=y
 CONFIG_I2C_GPIO=y
 CONFIG_I2C_RCAR=y
+CONFIG_SPI=y
+CONFIG_SPI_RSPI=y
 CONFIG_GPIO_SH_PFC=y
 CONFIG_GPIOLIB=y
 CONFIG_GPIO_RCAR=y
···
 CONFIG_REGULATOR=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_REGULATOR_GPIO=y
+CONFIG_MEDIA_SUPPORT=y
+CONFIG_MEDIA_CAMERA_SUPPORT=y
+CONFIG_V4L_PLATFORM_DRIVERS=y
+CONFIG_SOC_CAMERA=y
+CONFIG_SOC_CAMERA_PLATFORM=y
+CONFIG_VIDEO_RCAR_VIN=y
+# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set
+CONFIG_VIDEO_ADV7180=y
 CONFIG_DRM=y
 CONFIG_DRM_RCAR_DU=y
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_SOC=y
+CONFIG_SND_SOC_RCAR=y
 # CONFIG_USB_SUPPORT is not set
 CONFIG_MMC=y
 CONFIG_MMC_SDHI=y

arch/arm/configs/mackerel_defconfig

···
 # CONFIG_IPV6 is not set
 # CONFIG_WIRELESS is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
 # CONFIG_FIRMWARE_IN_KERNEL is not set
 CONFIG_MTD=y
 CONFIG_MTD_CONCAT=y

arch/arm/configs/marzen_defconfig

···
 # CONFIG_IPV6 is not set
 # CONFIG_WIRELESS is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
 # CONFIG_STANDALONE is not set
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_FW_LOADER is not set

arch/arm/configs/multi_v5_defconfig

···
+CONFIG_SYSVIPC=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_LOG_BUF_SHIFT=19
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=y
+CONFIG_KPROBES=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_ARCH_MULTI_V7 is not set
+CONFIG_ARCH_MVEBU=y
+CONFIG_MACH_KIRKWOOD=y
+CONFIG_MACH_T5325=y
+CONFIG_ARCH_MXC=y
+CONFIG_MACH_IMX25_DT=y
+CONFIG_MACH_IMX27_DT=y
+CONFIG_ARCH_U300=y
+CONFIG_PCI_MVEBU=y
+CONFIG_PREEMPT=y
+CONFIG_AEABI=y
+CONFIG_HIGHMEM=y
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_ARM_APPENDED_DTB=y
+CONFIG_ARM_ATAG_DTB_COMPAT=y
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_STAT_DETAILS=y
+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
+CONFIG_CPU_IDLE=y
+CONFIG_ARM_KIRKWOOD_CPUIDLE=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IPV6 is not set
+CONFIG_NET_PKTGEN=m
+CONFIG_CFG80211=y
+CONFIG_MAC80211=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_GEOMETRY=y
+# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_STAA=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_M25P80=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_ORION=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_EEPROM_AT24=y
+# CONFIG_SCSI_PROC_FS is not set
+CONFIG_BLK_DEV_SD=y
+CONFIG_BLK_DEV_SR=m
+CONFIG_CHR_DEV_SG=m
+CONFIG_ATA=y
+CONFIG_SATA_AHCI=y
+CONFIG_SATA_MV=y
+CONFIG_NETDEVICES=y
+CONFIG_NET_DSA_MV88E6123_61_65=y
+CONFIG_MV643XX_ETH=y
+CONFIG_R8169=y
+CONFIG_MARVELL_PHY=y
+CONFIG_LIBERTAS=y
+CONFIG_LIBERTAS_SDIO=y
+CONFIG_INPUT_EVDEV=y
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_LEGACY_PTY_COUNT=16
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+# CONFIG_I2C_COMPAT is not set
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_MV64XXX=y
+CONFIG_I2C_NOMADIK=y
+CONFIG_SPI=y
+CONFIG_SPI_ORION=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_POWER_SUPPLY=y
+CONFIG_POWER_RESET=y
+CONFIG_POWER_RESET_GPIO=y
+CONFIG_POWER_RESET_QNAP=y
+CONFIG_SENSORS_ADT7475=y
+CONFIG_SENSORS_LM63=y
+CONFIG_SENSORS_LM75=y
+CONFIG_SENSORS_LM85=y
+CONFIG_THERMAL=y
+CONFIG_KIRKWOOD_THERMAL=y
+CONFIG_WATCHDOG=y
+CONFIG_ORION_WATCHDOG=y
+CONFIG_FB=y
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_SOC=y
+CONFIG_SND_KIRKWOOD_SOC=y
+CONFIG_SND_KIRKWOOD_SOC_T5325=y
+# CONFIG_ABX500_CORE is not set
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_HID_DRAGONRISE=y
+CONFIG_HID_GYRATION=y
+CONFIG_HID_TWINHAN=y
+CONFIG_HID_NTRIG=y
+CONFIG_HID_PANTHERLORD=y
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
+CONFIG_HID_GREENASIA=y
+CONFIG_HID_SMARTJOYPLUS=y
+CONFIG_HID_TOPSEED=y
+CONFIG_HID_THRUSTMASTER=y
+CONFIG_HID_ZEROPLUS=y
+CONFIG_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_PRINTER=m
+CONFIG_USB_STORAGE=y
+CONFIG_USB_STORAGE_DATAFAB=y
+CONFIG_USB_STORAGE_FREECOM=y
+CONFIG_USB_STORAGE_SDDR09=y
+CONFIG_USB_STORAGE_SDDR55=y
+CONFIG_USB_STORAGE_JUMPSHOT=y
+CONFIG_MMC=y
+CONFIG_SDIO_UART=y
+CONFIG_MMC_MVSDIO=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_RS5C372=y
+CONFIG_RTC_DRV_PCF8563=y
+CONFIG_RTC_DRV_S35390A=y
+CONFIG_RTC_DRV_MV=y
+CONFIG_DMADEVICES=y
+CONFIG_MV_XOR=y
+CONFIG_STAGING=y
+CONFIG_FB_XGI=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_XATTR is not set
+CONFIG_EXT4_FS=y
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_UDF_FS=m
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
+CONFIG_JFFS2_FS=y
+CONFIG_CRAMFS=y
+CONFIG_NFS_FS=y
+CONFIG_ROOT_NFS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=y
+CONFIG_NLS_UTF8=y
+CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_FS=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_FTRACE is not set
+CONFIG_DEBUG_USER=y
+CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_DEV_MV_CESA=y
+CONFIG_CRC_CCITT=y
+CONFIG_LIBCRC32C=y

arch/arm/configs/multi_v7_defconfig

···
 CONFIG_SYSVIPC=y
+CONFIG_FHANDLE=y
 CONFIG_IRQ_DOMAIN_DEBUG=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
···
 CONFIG_PARTITION_ADVANCED=y
 CONFIG_ARCH_MVEBU=y
 CONFIG_MACH_ARMADA_370=y
+CONFIG_MACH_ARMADA_375=y
+CONFIG_MACH_ARMADA_38X=y
 CONFIG_MACH_ARMADA_XP=y
+CONFIG_MACH_DOVE=y
 CONFIG_ARCH_BCM=y
 CONFIG_ARCH_BCM_5301X=y
 CONFIG_ARCH_BCM_MOBILE=y
···
 CONFIG_SOC_AM33XX=y
 CONFIG_SOC_DRA7XX=y
 CONFIG_SOC_AM43XX=y
+CONFIG_ARCH_QCOM=y
+CONFIG_ARCH_MSM8X60=y
+CONFIG_ARCH_MSM8960=y
+CONFIG_ARCH_MSM8974=y
 CONFIG_ARCH_ROCKCHIP=y
 CONFIG_ARCH_SOCFPGA=y
 CONFIG_PLAT_SPEAR=y
···
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_DMA_CMA=y
+CONFIG_CMA_SIZE_MBYTES=64
 CONFIG_OMAP_OCP2SCP=y
 CONFIG_MTD=y
 CONFIG_MTD_M25P80=y
···
 CONFIG_NETDEVICES=y
 CONFIG_SUN4I_EMAC=y
 CONFIG_NET_CALXEDA_XGMAC=y
+CONFIG_MV643XX_ETH=y
 CONFIG_MVNETA=y
 CONFIG_KS8851=y
 CONFIG_R8169=y
···
 CONFIG_SERIAL_TEGRA=y
 CONFIG_SERIAL_IMX=y
 CONFIG_SERIAL_IMX_CONSOLE=y
+CONFIG_SERIAL_MSM=y
+CONFIG_SERIAL_MSM_CONSOLE=y
 CONFIG_SERIAL_VT8500=y
 CONFIG_SERIAL_VT8500_CONSOLE=y
 CONFIG_SERIAL_OF_PLATFORM=y
···
 CONFIG_SERIAL_ST_ASC_CONSOLE=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_MUX=y
+CONFIG_I2C_MUX_PCA954x=y
 CONFIG_I2C_MUX_PINCTRL=y
 CONFIG_I2C_DESIGNWARE_PLATFORM=y
 CONFIG_I2C_MV64XXX=y
···
 CONFIG_POWER_RESET_GPIO=y
 CONFIG_SENSORS_LM90=y
 CONFIG_THERMAL=y
+CONFIG_DOVE_THERMAL=y
 CONFIG_ARMADA_THERMAL=y
+CONFIG_WATCHDOG=y
+CONFIG_ORION_WATCHDOG=y
 CONFIG_MFD_AS3722=y
 CONFIG_MFD_CROS_EC=y
 CONFIG_MFD_CROS_EC_SPI=y
···
 CONFIG_MEDIA_SUPPORT=y
 CONFIG_MEDIA_CAMERA_SUPPORT=y
 CONFIG_MEDIA_USB_SUPPORT=y
+CONFIG_USB_VIDEO_CLASS=y
+CONFIG_USB_GSPCA=y
 CONFIG_DRM=y
 CONFIG_DRM_TEGRA=y
 CONFIG_DRM_PANEL_SIMPLE=y
···
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_ESDHC_IMX=y
 CONFIG_MMC_SDHCI_TEGRA=y
+CONFIG_MMC_SDHCI_DOVE=y
 CONFIG_MMC_SDHCI_SPEAR=y
 CONFIG_MMC_SDHCI_BCM_KONA=y
 CONFIG_MMC_OMAP=y
···
 CONFIG_KEYBOARD_NVEC=y
 CONFIG_SERIO_NVEC_PS2=y
 CONFIG_NVEC_POWER=y
+CONFIG_COMMON_CLK_QCOM=y
+CONFIG_MSM_GCC_8660=y
+CONFIG_MSM_MMCC_8960=y
+CONFIG_MSM_MMCC_8974=y
 CONFIG_TEGRA_IOMMU_GART=y
 CONFIG_TEGRA_IOMMU_SMMU=y
 CONFIG_MEMORY=y

arch/arm/configs/mvebu_defconfig arch/arm/configs/mvebu_v7_defconfig

···
 CONFIG_MODULE_UNLOAD=y
 CONFIG_ARCH_MVEBU=y
 CONFIG_MACH_ARMADA_370=y
+CONFIG_MACH_ARMADA_375=y
+CONFIG_MACH_ARMADA_38X=y
 CONFIG_MACH_ARMADA_XP=y
 CONFIG_NEON=y
 # CONFIG_CACHE_L2X0 is not set
···
 CONFIG_GPIO_SYSFS=y
 CONFIG_THERMAL=y
 CONFIG_ARMADA_THERMAL=y
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_SOC=y
+CONFIG_SND_KIRKWOOD_SOC=y
+CONFIG_SND_KIRKWOOD_SOC_ARMADA370_DB=y
+CONFIG_WATCHDOG=y
+CONFIG_ORION_WATCHDOG=y
 CONFIG_USB_SUPPORT=y
 CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y

arch/arm/configs/mvebu_v5_defconfig

···
+CONFIG_SYSVIPC=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_LOG_BUF_SHIFT=19
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=y
+CONFIG_KPROBES=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_ARCH_MULTI_V7 is not set
+CONFIG_ARCH_MVEBU=y
+CONFIG_MACH_KIRKWOOD=y
+CONFIG_MACH_T5325=y
+# CONFIG_CPU_FEROCEON_OLD_ID is not set
+CONFIG_PCI_MVEBU=y
+CONFIG_PREEMPT=y
+CONFIG_AEABI=y
+CONFIG_HIGHMEM=y
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_STAT_DETAILS=y
+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
+CONFIG_CPU_IDLE=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IPV6 is not set
+CONFIG_NET_PKTGEN=m
+CONFIG_CFG80211=y
+CONFIG_MAC80211=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_GEOMETRY=y
+# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_STAA=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_M25P80=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_ORION=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_EEPROM_AT24=y
+# CONFIG_SCSI_PROC_FS is not set
+CONFIG_BLK_DEV_SD=y
+CONFIG_BLK_DEV_SR=m
+CONFIG_CHR_DEV_SG=m
+CONFIG_ATA=y
+CONFIG_SATA_AHCI=y
+CONFIG_SATA_MV=y
+CONFIG_NETDEVICES=y
+CONFIG_NET_DSA_MV88E6123_61_65=y
+CONFIG_MV643XX_ETH=y
+CONFIG_R8169=y
+CONFIG_MARVELL_PHY=y
+CONFIG_LIBERTAS=y
+CONFIG_LIBERTAS_SDIO=y
+CONFIG_INPUT_EVDEV=y
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_LEGACY_PTY_COUNT=16
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+# CONFIG_I2C_COMPAT is not set
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_MV64XXX=y
+CONFIG_SPI=y
+CONFIG_SPI_ORION=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_POWER_SUPPLY=y
+CONFIG_POWER_RESET=y
+CONFIG_POWER_RESET_GPIO=y
+CONFIG_POWER_RESET_QNAP=y
+CONFIG_SENSORS_ADT7475=y
+CONFIG_SENSORS_LM63=y
+CONFIG_SENSORS_LM75=y
+CONFIG_SENSORS_LM85=y
+CONFIG_THERMAL=y
+CONFIG_WATCHDOG=y
+CONFIG_ORION_WATCHDOG=y
+CONFIG_FB=y
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_SOC=y
+CONFIG_SND_KIRKWOOD_SOC=y
+CONFIG_SND_KIRKWOOD_SOC_T5325=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_HID_DRAGONRISE=y
+CONFIG_HID_GYRATION=y
+CONFIG_HID_TWINHAN=y
+CONFIG_HID_NTRIG=y
+CONFIG_HID_PANTHERLORD=y
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
+CONFIG_HID_GREENASIA=y
+CONFIG_HID_SMARTJOYPLUS=y
+CONFIG_HID_TOPSEED=y
+CONFIG_HID_THRUSTMASTER=y
+CONFIG_HID_ZEROPLUS=y
+CONFIG_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_PRINTER=m
+CONFIG_USB_STORAGE=y
+CONFIG_USB_STORAGE_DATAFAB=y
+CONFIG_USB_STORAGE_FREECOM=y
+CONFIG_USB_STORAGE_SDDR09=y
+CONFIG_USB_STORAGE_SDDR55=y
+CONFIG_USB_STORAGE_JUMPSHOT=y
+CONFIG_MMC=y
+CONFIG_SDIO_UART=y
+CONFIG_MMC_MVSDIO=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_RS5C372=y
+CONFIG_RTC_DRV_PCF8563=y
+CONFIG_RTC_DRV_S35390A=y
+CONFIG_RTC_DRV_MV=y
+CONFIG_DMADEVICES=y
+CONFIG_MV_XOR=y
+CONFIG_STAGING=y
+CONFIG_FB_XGI=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_XATTR is not set
+CONFIG_EXT4_FS=y
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_UDF_FS=m
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
+CONFIG_JFFS2_FS=y
+CONFIG_CRAMFS=y
+CONFIG_NFS_FS=y
+CONFIG_ROOT_NFS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=y
+CONFIG_NLS_UTF8=y
+CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_FS=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_FTRACE is not set
+CONFIG_DEBUG_USER=y
+CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_DEV_MV_CESA=y
+CONFIG_CRC_CCITT=y
+CONFIG_LIBCRC32C=y

arch/arm/configs/shmobile_defconfig

···
+CONFIG_SYSVIPC=y
+CONFIG_NO_HZ=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=16
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_EMBEDDED=y
+CONFIG_PERF_EVENTS=y
+CONFIG_SLAB=y
+CONFIG_ARCH_SHMOBILE_MULTI=y
+CONFIG_ARCH_EMEV2=y
+CONFIG_ARCH_R8A7790=y
+CONFIG_ARCH_R8A7791=y
+CONFIG_MACH_KOELSCH=y
+CONFIG_MACH_LAGER=y
+# CONFIG_SWP_EMULATE is not set
+CONFIG_CPU_BPREDICT_DISABLE=y
+CONFIG_PL310_ERRATA_588369=y
+CONFIG_ARM_ERRATA_754322=y
+CONFIG_PCI=y
+CONFIG_PCI_RCAR_GEN2=y
+CONFIG_SMP=y
+CONFIG_SCHED_MC=y
+CONFIG_HAVE_ARM_ARCH_TIMER=y
+CONFIG_NR_CPUS=8
+CONFIG_AEABI=y
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_ARM_APPENDED_DTB=y
+CONFIG_KEXEC=y
+CONFIG_VFP=y
+CONFIG_NEON=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_MTD=y
+CONFIG_MTD_M25P80=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_ATA=y
+CONFIG_SATA_RCAR=y
+CONFIG_NETDEVICES=y
+# CONFIG_NET_VENDOR_ARC is not set
+# CONFIG_NET_CADENCE is not set
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_CIRRUS is not set
+# CONFIG_NET_VENDOR_FARADAY is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+CONFIG_SH_ETH=y
+# CONFIG_NET_VENDOR_SEEQ is not set
+CONFIG_SMSC911X=y
+# CONFIG_NET_VENDOR_STMICRO is not set
+# CONFIG_NET_VENDOR_VIA is not set
+# CONFIG_NET_VENDOR_WIZNET is not set
+CONFIG_SMSC_PHY=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_EM=y
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=20
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_I2C_GPIO=y
+CONFIG_I2C_RCAR=y
+CONFIG_SPI=y
+CONFIG_SPI_RSPI=y
+CONFIG_GPIO_EM=y
+CONFIG_GPIO_RCAR=y
+# CONFIG_HWMON is not set
+CONFIG_THERMAL=y
+CONFIG_RCAR_THERMAL=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_REGULATOR_GPIO=y
+CONFIG_MEDIA_SUPPORT=y
+CONFIG_MEDIA_CAMERA_SUPPORT=y
+CONFIG_V4L_PLATFORM_DRIVERS=y
+CONFIG_SOC_CAMERA=y
+CONFIG_SOC_CAMERA_PLATFORM=y
+CONFIG_VIDEO_RCAR_VIN=y
+# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set
+CONFIG_VIDEO_ADV7180=y
+CONFIG_DRM=y
+CONFIG_DRM_RCAR_DU=y
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_SOC=y
+CONFIG_SND_SOC_RCAR=y
+CONFIG_USB_RCAR_GEN2_PHY=y
+CONFIG_MMC=y
+CONFIG_MMC_SDHI=y
+CONFIG_MMC_SH_MMCIF=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_RTC_CLASS=y
+CONFIG_DMADEVICES=y
+CONFIG_SH_DMAE=y
+# CONFIG_IOMMU_SUPPORT is not set
+# CONFIG_DNOTIFY is not set
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
+CONFIG_CONFIGFS_FS=y
+# CONFIG_MISC_FILESYSTEMS is not set
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_NFS_V4_1=y
+CONFIG_ROOT_NFS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+# CONFIG_ARM_UNWIND is not set

arch/arm/configs/sunxi_defconfig

···
 # CONFIG_WIRELESS is not set
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_EEPROM_SUNXI_SID=y
 CONFIG_NETDEVICES=y
 CONFIG_SUN4I_EMAC=y
 # CONFIG_NET_CADENCE is not set
···
 # CONFIG_I2C_COMPAT is not set
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_MV64XXX=y
+CONFIG_SPI=y
+CONFIG_SPI_SUN6I=y
 CONFIG_GPIO_SYSFS=y
 # CONFIG_HWMON is not set
 CONFIG_WATCHDOG=y

arch/arm/configs/tegra_defconfig

···
 CONFIG_SYSVIPC=y
+CONFIG_FHANDLE=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_IKCONFIG=y
···
 CONFIG_DEVTMPFS_MOUNT=y
 # CONFIG_FIRMWARE_IN_KERNEL is not set
 CONFIG_DMA_CMA=y
+CONFIG_CMA_SIZE_MBYTES=64
 CONFIG_MTD=y
 CONFIG_MTD_M25P80=y
 CONFIG_PROC_DEVICETREE=y
···
 CONFIG_SERIAL_OF_PLATFORM=y
 # CONFIG_HW_RANDOM is not set
 # CONFIG_I2C_COMPAT is not set
+CONFIG_I2C_MUX_PCA954x=y
 CONFIG_I2C_MUX_PINCTRL=y
 CONFIG_I2C_TEGRA=y
 CONFIG_SPI=y
···
 CONFIG_BATTERY_SBS=y
 CONFIG_CHARGER_TPS65090=y
 CONFIG_POWER_RESET=y
+CONFIG_POWER_RESET_AS3722=y
 CONFIG_POWER_RESET_GPIO=y
 CONFIG_SENSORS_LM90=y
 CONFIG_MFD_AS3722=y
···
 CONFIG_MEDIA_SUPPORT=y
 CONFIG_MEDIA_CAMERA_SUPPORT=y
 CONFIG_MEDIA_USB_SUPPORT=y
-CONFIG_USB_VIDEO_CLASS=m
+CONFIG_USB_VIDEO_CLASS=y
+CONFIG_USB_GSPCA=y
 CONFIG_DRM=y
 CONFIG_DRM_TEGRA=y
 CONFIG_DRM_PANEL_SIMPLE=y

arch/arm/mach-pxa/corgi.c

···
 #include <linux/spi/pxa2xx_spi.h>
 #include <linux/mtd/sharpsl.h>
 #include <linux/input/matrix_keypad.h>
+#include <linux/gpio_keys.h>
 #include <linux/module.h>
 #include <video/w100fb.h>
 
···
 	},
 };
 
+static struct gpio_keys_button corgi_gpio_keys[] = {
+	{
+		.type	= EV_SW,
+		.code	= SW_LID,
+		.gpio	= CORGI_GPIO_SWA,
+		.desc	= "Lid close switch",
+		.debounce_interval = 500,
+	},
+	{
+		.type	= EV_SW,
+		.code	= SW_TABLET_MODE,
+		.gpio	= CORGI_GPIO_SWB,
+		.desc	= "Tablet mode switch",
+		.debounce_interval = 500,
+	},
+	{
+		.type	= EV_SW,
+		.code	= SW_HEADPHONE_INSERT,
+		.gpio	= CORGI_GPIO_AK_INT,
+		.desc	= "HeadPhone insert",
+		.debounce_interval = 500,
+	},
+};
+
+static struct gpio_keys_platform_data corgi_gpio_keys_platform_data = {
+	.buttons	= corgi_gpio_keys,
+	.nbuttons	= ARRAY_SIZE(corgi_gpio_keys),
+	.poll_interval	= 250,
+};
+
+static struct platform_device corgi_gpio_keys_device = {
+	.name	= "gpio-keys-polled",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &corgi_gpio_keys_platform_data,
+	},
+};
+
 /*
  * Corgi LEDs
  */
···
 static struct platform_device *devices[] __initdata = {
 	&corgiscoop_device,
 	&corgifb_device,
+	&corgi_gpio_keys_device,
 	&corgikbd_device,
 	&corgiled_device,
 	&corgi_audio_device,

arch/arm/mach-shmobile/Kconfig

···
 config MACH_KOELSCH
 	bool "Koelsch board"
 	depends on ARCH_R8A7791
-
-config MACH_KZM9D
-	bool "KZM9D board"
-	depends on ARCH_EMEV2
-	select REGULATOR_FIXED_VOLTAGE if REGULATOR
+	select MICREL_PHY if SH_ETH
 
 config MACH_LAGER
 	bool "Lager board"
 	depends on ARCH_R8A7790
+	select MICREL_PHY if SH_ETH
 
 comment "Renesas ARM SoCs System Configuration"
 endif
···
 config MACH_APE6EVM
 	bool "APE6EVM board"
 	depends on ARCH_R8A73A4
+	select SMSC_PHY if SMSC911X
 	select USE_OF
 
 config MACH_APE6EVM_REFERENCE
 	bool "APE6EVM board - Reference Device Tree Implementation"
 	depends on ARCH_R8A73A4
+	select SMSC_PHY if SMSC911X
 	select USE_OF
 	---help---
 	   Use reference implementation of APE6EVM board support
···
 	depends on ARCH_SH7372
 	select ARCH_REQUIRE_GPIOLIB
 	select REGULATOR_FIXED_VOLTAGE if REGULATOR
+	select SMSC_PHY if SMSC911X
 	select SND_SOC_AK4642 if SND_SIMPLE_CARD
 	select USE_OF
 
···
 	depends on ARCH_R8A7740
 	select ARCH_REQUIRE_GPIOLIB
 	select REGULATOR_FIXED_VOLTAGE if REGULATOR
+	select SMSC_PHY if SH_ETH
 	select SND_SOC_WM8978 if SND_SIMPLE_CARD
 	select USE_OF
 
···
 	depends on ARCH_R8A7740
 	select ARCH_REQUIRE_GPIOLIB
 	select REGULATOR_FIXED_VOLTAGE if REGULATOR
+	select SMSC_PHY if SH_ETH
 	select SND_SOC_WM8978 if SND_SIMPLE_CARD
 	select USE_OF
 	---help---
···
 	bool "BOCK-W platform"
 	depends on ARCH_R8A7778
 	select ARCH_REQUIRE_GPIOLIB
-	select RENESAS_INTC_IRQPIN
 	select REGULATOR_FIXED_VOLTAGE if REGULATOR
-	select USE_OF
+	select RENESAS_INTC_IRQPIN
 	select SND_SOC_AK4554 if SND_SIMPLE_CARD
 	select SND_SOC_AK4642 if SND_SIMPLE_CARD
+	select USE_OF
 
 config MACH_BOCKW_REFERENCE
 	bool "BOCK-W  - Reference Device Tree Implementation"
···
 	bool "Lager board"
 	depends on ARCH_R8A7790
 	select USE_OF
+	select MICREL_PHY if SH_ETH
+	select SND_SOC_AK4642 if SND_SIMPLE_CARD
 
 config MACH_KOELSCH
 	bool "Koelsch board"

arch/arm/mach-shmobile/Makefile

···
 ifdef CONFIG_ARCH_SHMOBILE_MULTI
 obj-$(CONFIG_MACH_GENMAI)	+= board-genmai-reference.o
 obj-$(CONFIG_MACH_KOELSCH)	+= board-koelsch-reference.o
-obj-$(CONFIG_MACH_KZM9D)	+= board-kzm9d-reference.o
 obj-$(CONFIG_MACH_LAGER)	+= board-lager-reference.o
 else
 obj-$(CONFIG_MACH_APE6EVM)	+= board-ape6evm.o

arch/arm/mach-shmobile/board-armadillo800eva.c

···
 	.id = -1,
 	.dev = {
 		.platform_data = &sh_eth_platdata,
+		.dma_mask = &sh_eth_device.dev.coherent_dma_mask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
 	},
 	.resource = sh_eth_resources,
 	.num_resources = ARRAY_SIZE(sh_eth_resources),

arch/arm/mach-shmobile/board-bockw.c

···
 /*
  * Bock-W board support
  *
- * Copyright (C) 2013  Renesas Solutions Corp.
+ * Copyright (C) 2013-2014  Renesas Solutions Corp.
  * Copyright (C) 2013  Kuninori Morimoto <[e-mail]>
- * Copyright (C) 2013  Cogent Embedded, Inc.
+ * Copyright (C) 2013-2014  Cogent Embedded, Inc.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
···
 	},
 	.driver_param = {
 		.buswait_bwait	= 4,
+		.d0_tx_id	= HPBDMA_SLAVE_USBFUNC_TX,
+		.d1_rx_id	= HPBDMA_SLAVE_USBFUNC_RX,
 	},
 };
 
···
 	 * and getting the link state from the PHY indirectly.
 	 */
 	.no_ether_link	= 1,
+};
+
+static struct platform_device_info ether_info __initdata = {
+	.parent		= &platform_bus,
+	.name		= "r8a777x-ether",
+	.id		= -1,
+	.res		= ether_resources,
+	.num_res	= ARRAY_SIZE(ether_resources),
+	.data		= &ether_platform_data,
+	.size_data	= sizeof(ether_platform_data),
+	.dma_mask	= DMA_BIT_MASK(32),
 };
 
 /* I2C */
···
 	RSND_SSI_UNUSED, /* SSI 0 */
 	RSND_SSI_UNUSED, /* SSI 1 */
 	RSND_SSI_UNUSED, /* SSI 2 */
-	RSND_SSI_SET(1, 0, gic_iid(0x85), RSND_SSI_PLAY),
-	RSND_SSI_SET(2, 0, gic_iid(0x85), RSND_SSI_CLK_PIN_SHARE),
-	RSND_SSI_SET(0, 0, gic_iid(0x86), RSND_SSI_PLAY),
-	RSND_SSI_SET(0, 0, gic_iid(0x86), 0),
-	RSND_SSI_SET(3, 0, gic_iid(0x86), RSND_SSI_PLAY),
-	RSND_SSI_SET(4, 0, gic_iid(0x86), RSND_SSI_CLK_PIN_SHARE),
+	RSND_SSI_SET(1, HPBDMA_SLAVE_HPBIF3_TX, gic_iid(0x85), RSND_SSI_PLAY),
+	RSND_SSI_SET(2, HPBDMA_SLAVE_HPBIF4_RX, gic_iid(0x85), RSND_SSI_CLK_PIN_SHARE),
+	RSND_SSI_SET(0, HPBDMA_SLAVE_HPBIF5_TX, gic_iid(0x86), RSND_SSI_PLAY),
+	RSND_SSI_SET(0, HPBDMA_SLAVE_HPBIF6_RX, gic_iid(0x86), 0),
+	RSND_SSI_SET(3, HPBDMA_SLAVE_HPBIF7_TX, gic_iid(0x86), RSND_SSI_PLAY),
+	RSND_SSI_SET(4, HPBDMA_SLAVE_HPBIF8_RX, gic_iid(0x86), RSND_SSI_CLK_PIN_SHARE),
 };
 
 static struct rsnd_scu_platform_info rsnd_scu[9] = {
-	/* no member at this point */
+	{ .flags = 0, }, /* SRU 0 */
+	{ .flags = 0, }, /* SRU 1 */
+	{ .flags = 0, }, /* SRU 2 */
+	{ .flags = RSND_SCU_USE_HPBIF, },
+	{ .flags = RSND_SCU_USE_HPBIF, },
+	{ .flags = RSND_SCU_USE_HPBIF, },
+	{ .flags = RSND_SCU_USE_HPBIF, },
+	{ .flags = RSND_SCU_USE_HPBIF, },
+	{ .flags = RSND_SCU_USE_HPBIF, },
 };
 
 enum {
···
 	r8a7778_init_irq_extpin(1);
 	r8a7778_add_standard_devices();
 
-	platform_device_register_resndata(&platform_bus, "r8a777x-ether", -1,
-					  ether_resources,
-					  ARRAY_SIZE(ether_resources),
-					  &ether_platform_data,
-					  sizeof(ether_platform_data));
+	platform_device_register_full(&ether_info);
 
 	platform_device_register_full(&vin0_info);
 	/* VIN1 has a pin conflict with Ether */

arch/arm/mach-shmobile/board-genmai.c

···
 /*
  * Genmai board support
  *
- * Copyright (C) 2013  Renesas Solutions Corp.
+ * Copyright (C) 2013-2014  Renesas Solutions Corp.
  * Copyright (C) 2013  Magnus Damm
+ * Copyright (C) 2014  Cogent Embedded, Inc.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
···
 
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
+#include <linux/sh_eth.h>
+#include <linux/spi/rspi.h>
+#include <linux/spi/spi.h>
 #include <mach/common.h>
+#include <mach/irqs.h>
 #include <mach/r7s72100.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
+
+/* Ether */
+static const struct sh_eth_plat_data ether_pdata __initconst = {
+	.phy			= 0x00, /* PD60610 */
+	.edmac_endian		= EDMAC_LITTLE_ENDIAN,
+	.phy_interface		= PHY_INTERFACE_MODE_MII,
+	.no_ether_link		= 1
+};
+
+static const struct resource ether_resources[] __initconst = {
+	DEFINE_RES_MEM(0xe8203000, 0x800),
+	DEFINE_RES_MEM(0xe8204800, 0x200),
+	DEFINE_RES_IRQ(gic_iid(359)),
+};
+
+static const struct platform_device_info ether_info __initconst = {
+	.parent		= &platform_bus,
+	.name		= "r7s72100-ether",
+	.id		= -1,
+	.res		= ether_resources,
+	.num_res	= ARRAY_SIZE(ether_resources),
+	.data		= &ether_pdata,
+	.size_data	= sizeof(ether_pdata),
+	.dma_mask	= DMA_BIT_MASK(32),
+};
+
+/* RSPI */
+#define RSPI_RESOURCE(idx, baseaddr, irq)				\
+static const struct resource rspi##idx##_resources[] __initconst = {	\
+	DEFINE_RES_MEM(baseaddr, 0x24),					\
+	DEFINE_RES_IRQ_NAMED(irq, "error"),				\
+	DEFINE_RES_IRQ_NAMED(irq + 1, "rx"),				\
+	DEFINE_RES_IRQ_NAMED(irq + 2, "tx"),				\
+}
+
+RSPI_RESOURCE(0, 0xe800c800, gic_iid(270));
+RSPI_RESOURCE(1, 0xe800d000, gic_iid(273));
+RSPI_RESOURCE(2, 0xe800d800, gic_iid(276));
+RSPI_RESOURCE(3, 0xe800e000, gic_iid(279));
+RSPI_RESOURCE(4, 0xe800e800, gic_iid(282));
+
+static const struct rspi_plat_data rspi_pdata __initconst = {
+	.num_chipselect	= 1,
+};
+
+#define r7s72100_register_rspi(idx)					   \
+	platform_device_register_resndata(&platform_bus, "rspi-rz", idx,   \
+					rspi##idx##_resources,		   \
+					ARRAY_SIZE(rspi##idx##_resources), \
+					&rspi_pdata, sizeof(rspi_pdata))
+
+static const struct spi_board_info spi_info[] __initconst = {
+	{
+		.modalias               = "wm8978",
+		.max_speed_hz           = 5000000,
+		.bus_num                = 4,
+		.chip_select            = 0,
+	},
+};
 
 static void __init genmai_add_standard_devices(void)
 {
 	r7s72100_clock_init();
 	r7s72100_add_dt_devices();
+
+	platform_device_register_full(&ether_info);
+
+	r7s72100_register_rspi(0);
+	r7s72100_register_rspi(1);
+	r7s72100_register_rspi(2);
+	r7s72100_register_rspi(3);
+	r7s72100_register_rspi(4);
+	spi_register_board_info(spi_info, ARRAY_SIZE(spi_info));
 }
 
 static const char * const genmai_boards_compat_dt[] __initconst = {

arch/arm/mach-shmobile/board-koelsch-reference.c

···
 
 #include <linux/clk.h>
 #include <linux/clkdev.h>
+#include <linux/dma-mapping.h>
 #include <linux/kernel.h>
 #include <linux/of_platform.h>
+#include <linux/platform_data/rcar-du.h>
 #include <mach/common.h>
+#include <mach/irqs.h>
 #include <mach/rcar-gen2.h>
 #include <mach/r8a7791.h>
 #include <asm/mach/arch.h>
 
+/* DU */
+static struct rcar_du_encoder_data koelsch_du_encoders[] = {
+	{
+		.type = RCAR_DU_ENCODER_NONE,
+		.output = RCAR_DU_OUTPUT_LVDS0,
+		.connector.lvds.panel = {
+			.width_mm = 210,
+			.height_mm = 158,
+			.mode = {
+				.clock = 65000,
+				.hdisplay = 1024,
+				.hsync_start = 1048,
+				.hsync_end = 1184,
+				.htotal = 1344,
+				.vdisplay = 768,
+				.vsync_start = 771,
+				.vsync_end = 777,
+				.vtotal = 806,
+				.flags = 0,
+			},
+		},
+	},
+};
+
+static struct rcar_du_platform_data koelsch_du_pdata = {
+	.encoders = koelsch_du_encoders,
+	.num_encoders = ARRAY_SIZE(koelsch_du_encoders),
+};
+
+static const struct resource du_resources[] __initconst = {
+	DEFINE_RES_MEM(0xfeb00000, 0x40000),
+	DEFINE_RES_MEM_NAMED(0xfeb90000, 0x1c, "lvds.0"),
+	DEFINE_RES_IRQ(gic_spi(256)),
+	DEFINE_RES_IRQ(gic_spi(268)),
+};
+
+static void __init koelsch_add_du_device(void)
+{
+	struct platform_device_info info = {
+		.name = "rcar-du-r8a7791",
+		.id = -1,
+		.res = du_resources,
+		.num_res = ARRAY_SIZE(du_resources),
+		.data = &koelsch_du_pdata,
+		.size_data = sizeof(koelsch_du_pdata),
+		.dma_mask = DMA_BIT_MASK(32),
+	};
+
+	platform_device_register_full(&info);
+}
+
 static void __init koelsch_add_standard_devices(void)
 {
-#ifdef CONFIG_COMMON_CLK
 	/*
-	 * This is a really crude hack to provide clkdev support to the SCIF
-	 * and CMT devices until they get moved to DT.
+	 * This is a really crude hack to provide clkdev support to the CMT and
+	 * DU devices until they get moved to DT.
 	 */
-	static const char * const scif_names[] = {
-		"scifa0", "scifa1", "scifb0", "scifb1", "scifb2", "scifa2",
-		"scif0", "scif1", "scif2", "scif3", "scif4", "scif5", "scifa3",
-		"scifa4", "scifa5",
+	static const struct clk_name {
+		const char *clk;
+		const char *con_id;
+		const char *dev_id;
+	} clk_names[] = {
+		{ "cmt0", NULL, "sh_cmt.0" },
+		{ "scifa0", NULL, "sh-sci.0" },
+		{ "scifa1", NULL, "sh-sci.1" },
+		{ "scifb0", NULL, "sh-sci.2" },
+		{ "scifb1", NULL, "sh-sci.3" },
+		{ "scifb2", NULL, "sh-sci.4" },
+		{ "scifa2", NULL, "sh-sci.5" },
+		{ "scif0", NULL, "sh-sci.6" },
+		{ "scif1", NULL, "sh-sci.7" },
+		{ "scif2", NULL, "sh-sci.8" },
+		{ "scif3", NULL, "sh-sci.9" },
+		{ "scif4", NULL, "sh-sci.10" },
+		{ "scif5", NULL, "sh-sci.11" },
+		{ "scifa3", NULL, "sh-sci.12" },
+		{ "scifa4", NULL, "sh-sci.13" },
+		{ "scifa5", NULL, "sh-sci.14" },
+		{ "du0", "du.0", "rcar-du-r8a7791" },
+		{ "du1", "du.1", "rcar-du-r8a7791" },
+		{ "lvds0", "lvds.0", "rcar-du-r8a7791" },
 	};
 	struct clk *clk;
 	unsigned int i;
 
-	for (i = 0; i < ARRAY_SIZE(scif_names); ++i) {
-		clk = clk_get(NULL, scif_names[i]);
-		if (clk) {
-			clk_register_clkdev(clk, NULL, "sh-sci.%u", i);
+	for (i = 0; i < ARRAY_SIZE(clk_names); ++i) {
+		clk = clk_get(NULL, clk_names[i].clk);
+		if (!IS_ERR(clk)) {
+			clk_register_clkdev(clk, clk_names[i].con_id,
+					    clk_names[i].dev_id);
 			clk_put(clk);
 		}
 	}
 
-	clk = clk_get(NULL, "cmt0");
-	if (clk) {
-		clk_register_clkdev(clk, NULL, "sh_cmt.0");
-		clk_put(clk);
-	}
-#else
-	r8a7791_clock_init();
-#endif
 	r8a7791_add_dt_devices();
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+
+	koelsch_add_du_device();
 }
 
 static const char * const koelsch_boards_compat_dt[] __initconst = {

arch/arm/mach-shmobile/board-koelsch.c

···
  * Koelsch board support
  *
  * Copyright (C) 2013  Renesas Electronics Corporation
- * Copyright (C) 2013  Renesas Solutions Corp.
+ * Copyright (C) 2013-2014  Renesas Solutions Corp.
  * Copyright (C) 2013  Magnus Damm
+ * Copyright (C) 2014  Cogent Embedded, Inc.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
···
 #include <linux/gpio.h>
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
+#include <linux/irq.h>
 #include <linux/kernel.h>
 #include <linux/leds.h>
+#include <linux/mfd/tmio.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/sh_mobile_sdhi.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
 #include <linux/phy.h>
 #include <linux/pinctrl/machine.h>
 #include <linux/platform_data/gpio-rcar.h>
 #include <linux/platform_data/rcar-du.h>
 #include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/gpio-regulator.h>
+#include <linux/regulator/machine.h>
 #include <linux/sh_eth.h>
+#include <linux/spi/flash.h>
+#include <linux/spi/rspi.h>
+#include <linux/spi/spi.h>
 #include <mach/common.h>
 #include <mach/irqs.h>
 #include <mach/r8a7791.h>
···
 /* Ether */
 static const struct sh_eth_plat_data ether_pdata __initconst = {
 	.phy			= 0x1,
+	.phy_irq		= irq_pin(0),
 	.edmac_endian		= EDMAC_LITTLE_ENDIAN,
 	.phy_interface		= PHY_INTERFACE_MODE_RMII,
 	.ether_link_active_low	= 1,
···
 static const struct resource ether_resources[] __initconst = {
 	DEFINE_RES_MEM(0xee700000, 0x400),
 	DEFINE_RES_IRQ(gic_spi(162)),
+};
+
+static const struct platform_device_info ether_info __initconst = {
+	.parent		= &platform_bus,
+	.name		= "r8a7791-ether",
+	.id		= -1,
+	.res		= ether_resources,
+	.num_res	= ARRAY_SIZE(ether_resources),
+	.data		= &ether_pdata,
+	.size_data	= sizeof(ether_pdata),
+	.dma_mask	= DMA_BIT_MASK(32),
 };
 
 /* LEDS */
···
 	.nbuttons	= ARRAY_SIZE(gpio_buttons),
 };
 
+/* QSPI */
+static const struct resource qspi_resources[] __initconst = {
+	DEFINE_RES_MEM(0xe6b10000, 0x1000),
+	DEFINE_RES_IRQ_NAMED(gic_spi(184), "mux"),
+};
+
+static const struct rspi_plat_data qspi_pdata __initconst = {
+	.num_chipselect = 1,
+};
+
+/* SPI Flash memory (Spansion S25FL512SAGMFIG11 64 MiB) */
+static struct mtd_partition spi_flash_part[] = {
+	{
+		.name		= "loader",
+		.offset		= 0x00000000,
+		.size		= 512 * 1024,
+		.mask_flags	= MTD_WRITEABLE,
+	},
+	{
+		.name		= "bootenv",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 512 * 1024,
+		.mask_flags	= MTD_WRITEABLE,
+	},
+	{
+		.name		= "data",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= MTDPART_SIZ_FULL,
+	},
+};
+
+static const struct flash_platform_data spi_flash_data = {
+	.name		= "m25p80",
+	.parts		= spi_flash_part,
+	.nr_parts	= ARRAY_SIZE(spi_flash_part),
+	.type		= "s25fl512s",
+};
+
+static const struct spi_board_info spi_info[] __initconst = {
+	{
+		.modalias	= "m25p80",
+		.platform_data	= &spi_flash_data,
+		.mode		= SPI_MODE_0,
+		.max_speed_hz	= 30000000,
+		.bus_num	= 0,
+		.chip_select	= 0,
+	},
+};
+
+/* SATA0 */
+static const struct resource sata0_resources[] __initconst = {
+	DEFINE_RES_MEM(0xee300000, 0x2000),
+	DEFINE_RES_IRQ(gic_spi(105)),
+};
+
+static const struct platform_device_info sata0_info __initconst = {
+	.parent		= &platform_bus,
+	.name		= "sata-r8a7791",
+	.id		= 0,
+	.res		= sata0_resources,
+	.num_res	= ARRAY_SIZE(sata0_resources),
+	.dma_mask	= DMA_BIT_MASK(32),
+};
+
+/* I2C */
+static const struct resource i2c_resources[] __initconst = {
+	/* I2C0 */
+	DEFINE_RES_MEM(0xE6508000, 0x40),
+	DEFINE_RES_IRQ(gic_spi(287)),
+	/* I2C1 */
+	DEFINE_RES_MEM(0xE6518000, 0x40),
+	DEFINE_RES_IRQ(gic_spi(288)),
+	/* I2C2 */
+	DEFINE_RES_MEM(0xE6530000, 0x40),
+	DEFINE_RES_IRQ(gic_spi(286)),
+	/* I2C3 */
+	DEFINE_RES_MEM(0xE6540000, 0x40),
+	DEFINE_RES_IRQ(gic_spi(290)),
+	/* I2C4 */
+	DEFINE_RES_MEM(0xE6520000, 0x40),
+	DEFINE_RES_IRQ(gic_spi(19)),
+	/* I2C5 */
+	DEFINE_RES_MEM(0xE6528000, 0x40),
+	DEFINE_RES_IRQ(gic_spi(20)),
+};
+
+static void __init koelsch_add_i2c(unsigned idx)
+{
+	unsigned res_idx = idx * 2;
+
+	BUG_ON(res_idx >= ARRAY_SIZE(i2c_resources));
+
+	platform_device_register_simple("i2c-rcar_gen2", idx,
+					i2c_resources + res_idx, 2);
+}
+
+#define SDHI_REGULATOR(idx, vdd_pin, vccq_pin)				\
+static struct regulator_consumer_supply vcc_sdhi##idx##_consumer =	\
+	REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi." #idx);		\
+									\
+static struct regulator_init_data vcc_sdhi##idx##_init_data = {		\
+	.constraints = {						\
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,		\
+	},								\
+	.consumer_supplies	= &vcc_sdhi##idx##_consumer,		\
+	.num_consumer_supplies	= 1,					\
+};									\
+									\
+static const struct fixed_voltage_config vcc_sdhi##idx##_info __initconst = {\
+	.supply_name	= "SDHI" #idx "Vcc",				\
+	.microvolts	= 3300000,					\
+	.gpio		= vdd_pin,					\
+	.enable_high	= 1,						\
+	.init_data	= &vcc_sdhi##idx##_init_data,			\
+};									\
+									\
+static struct regulator_consumer_supply vccq_sdhi##idx##_consumer =	\
+	REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi." #idx);		\
+									\
+static struct regulator_init_data vccq_sdhi##idx##_init_data = {	\
+	.constraints = {						\
+		.input_uV	= 3300000,				\
+		.min_uV		= 1800000,				\
+		.max_uV		= 3300000,				\
+		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |		\
+				  REGULATOR_CHANGE_STATUS,		\
+	},								\
+	.consumer_supplies	= &vccq_sdhi##idx##_consumer,		\
+	.num_consumer_supplies	= 1,					\
+};									\
+									\
+static struct gpio vccq_sdhi##idx##_gpio =				\
+	{ vccq_pin, GPIOF_OUT_INIT_HIGH, "vccq-sdhi" #idx };		\
+									\
+static struct gpio_regulator_state vccq_sdhi##idx##_states[] = {	\
+	{ .value = 1800000, .gpios = 0 },				\
+	{ .value = 3300000, .gpios = 1 },				\
+};									\
+									\
+static const struct gpio_regulator_config vccq_sdhi##idx##_info __initconst = {\
+	.supply_name	= "vqmmc",					\
+	.gpios		= &vccq_sdhi##idx##_gpio,			\
+	.nr_gpios	= 1,						\
+	.states		= vccq_sdhi##idx##_states,			\
+	.nr_states	= ARRAY_SIZE(vccq_sdhi##idx##_states),		\
+	.type		= REGULATOR_VOLTAGE,				\
+	.init_data	= &vccq_sdhi##idx##_init_data,			\
+};
+
+SDHI_REGULATOR(0, RCAR_GP_PIN(7, 17), RCAR_GP_PIN(2, 12));
+SDHI_REGULATOR(1, RCAR_GP_PIN(7, 18), RCAR_GP_PIN(2, 13));
+SDHI_REGULATOR(2, RCAR_GP_PIN(7, 19), RCAR_GP_PIN(2, 26));
+
+/* SDHI0 */
+static struct sh_mobile_sdhi_info sdhi0_info __initdata = {
+	.tmio_caps	= MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |
+			  MMC_CAP_POWER_OFF_CARD,
+	.tmio_caps2	= MMC_CAP2_NO_MULTI_READ,
+	.tmio_flags	= TMIO_MMC_HAS_IDLE_WAIT,
+};
+
+static struct resource sdhi0_resources[] __initdata = {
+	DEFINE_RES_MEM(0xee100000, 0x200),
+	DEFINE_RES_IRQ(gic_spi(165)),
+};
+
+/* SDHI1 */
+static struct sh_mobile_sdhi_info sdhi1_info __initdata = {
+	.tmio_caps	= MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |
+			  MMC_CAP_POWER_OFF_CARD,
+	.tmio_caps2	= MMC_CAP2_NO_MULTI_READ,
+	.tmio_flags	= TMIO_MMC_HAS_IDLE_WAIT,
+};
+
+static struct resource sdhi1_resources[] __initdata = {
+	DEFINE_RES_MEM(0xee140000, 0x100),
+	DEFINE_RES_IRQ(gic_spi(167)),
+};
+
+/* SDHI2 */
+static struct sh_mobile_sdhi_info sdhi2_info __initdata = {
+	.tmio_caps	= MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |
+			  MMC_CAP_POWER_OFF_CARD,
+	.tmio_caps2	= MMC_CAP2_NO_MULTI_READ,
+	.tmio_flags	= TMIO_MMC_HAS_IDLE_WAIT |
+			  TMIO_MMC_WRPROTECT_DISABLE,
+};
+
+static struct resource sdhi2_resources[] __initdata = {
+	DEFINE_RES_MEM(0xee160000, 0x100),
+	DEFINE_RES_IRQ(gic_spi(168)),
+};
+
 static const struct pinctrl_map koelsch_pinctrl_map[] = {
 	/* DU */
 	PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7791", "pfc-r8a7791",
···
 				  "eth_rmii", "eth"),
 	PIN_MAP_MUX_GROUP_DEFAULT("r8a7791-ether", "pfc-r8a7791",
 				  "intc_irq0", "intc"),
+	/* QSPI */
+	PIN_MAP_MUX_GROUP_DEFAULT("qspi.0", "pfc-r8a7791",
+				  "qspi_ctrl", "qspi"),
+	PIN_MAP_MUX_GROUP_DEFAULT("qspi.0", "pfc-r8a7791",
+				  "qspi_data4", "qspi"),
 	/* SCIF0 (CN19: DEBUG SERIAL0) */
 	PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.6", "pfc-r8a7791",
 				  "scif0_data_d", "scif0"),
 	/* SCIF1 (CN20: DEBUG SERIAL1) */
 	PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.7", "pfc-r8a7791",
 				  "scif1_data_d", "scif1"),
+	/* I2C1 */
+	PIN_MAP_MUX_GROUP_DEFAULT("i2c-rcar_gen2.1", "pfc-r8a7791",
+				  "i2c1_e", "i2c1"),
+	/* I2C2 */
+	PIN_MAP_MUX_GROUP_DEFAULT("i2c-rcar_gen2.2", "pfc-r8a7791",
+				  "i2c2", "i2c2"),
+	/* I2C4 */
+	PIN_MAP_MUX_GROUP_DEFAULT("i2c-rcar_gen2.4", "pfc-r8a7791",
+				  "i2c4_c", "i2c4"),
+	/* SDHI0 */
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7791",
+				  "sdhi0_data4", "sdhi0"),
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7791",
+				  "sdhi0_ctrl", "sdhi0"),
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7791",
+				  "sdhi0_cd", "sdhi0"),
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7791",
+				  "sdhi0_wp", "sdhi0"),
+	/* SDHI2 */
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-r8a7791",
+				  "sdhi1_data4", "sdhi1"),
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-r8a7791",
+				  "sdhi1_ctrl", "sdhi1"),
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-r8a7791",
+				  "sdhi1_cd", "sdhi1"),
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-r8a7791",
+				  "sdhi1_wp", "sdhi1"),
+	/* SDHI2 */
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.2", "pfc-r8a7791",
+				  "sdhi2_data4", "sdhi2"),
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.2", "pfc-r8a7791",
+				  "sdhi2_ctrl", "sdhi2"),
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.2", "pfc-r8a7791",
+				  "sdhi2_cd", "sdhi2"),
 };
 
 static void __init koelsch_add_standard_devices(void)
···
 				  ARRAY_SIZE(koelsch_pinctrl_map));
 	r8a7791_pinmux_init();
 	r8a7791_add_standard_devices();
-	platform_device_register_resndata(&platform_bus, "r8a7791-ether", -1,
-					  ether_resources,
-					  ARRAY_SIZE(ether_resources),
-					  &ether_pdata, sizeof(ether_pdata));
+	platform_device_register_full(&ether_info);
 	platform_device_register_data(&platform_bus, "leds-gpio", -1,
 				      &koelsch_leds_pdata,
 				      sizeof(koelsch_leds_pdata));
 	platform_device_register_data(&platform_bus, "gpio-keys", -1,
 				      &koelsch_keys_pdata,
 				      sizeof(koelsch_keys_pdata));
+	platform_device_register_resndata(&platform_bus, "qspi", 0,
+					  qspi_resources,
+					  ARRAY_SIZE(qspi_resources),
+					  &qspi_pdata, sizeof(qspi_pdata));
+	spi_register_board_info(spi_info, ARRAY_SIZE(spi_info));
 
 	koelsch_add_du_device();
+
+	platform_device_register_full(&sata0_info);
+
+	koelsch_add_i2c(1);
+	koelsch_add_i2c(2);
+	koelsch_add_i2c(4);
+	koelsch_add_i2c(5);
+
+	platform_device_register_data(&platform_bus, "reg-fixed-voltage", 0,
+				      &vcc_sdhi0_info, sizeof(struct fixed_voltage_config));
+	platform_device_register_data(&platform_bus, "reg-fixed-voltage", 1,
+				      &vcc_sdhi1_info, sizeof(struct fixed_voltage_config));
+	platform_device_register_data(&platform_bus, "reg-fixed-voltage", 2,
+				      &vcc_sdhi2_info, sizeof(struct fixed_voltage_config));
+	platform_device_register_data(&platform_bus, "gpio-regulator", 0,
+				      &vccq_sdhi0_info, sizeof(struct gpio_regulator_config));
+	platform_device_register_data(&platform_bus, "gpio-regulator", 1,
+				      &vccq_sdhi1_info, sizeof(struct gpio_regulator_config));
+	platform_device_register_data(&platform_bus, "gpio-regulator", 2,
+				      &vccq_sdhi2_info, sizeof(struct gpio_regulator_config));
+
+	platform_device_register_resndata(&platform_bus, "sh_mobile_sdhi", 0,
+					  sdhi0_resources, ARRAY_SIZE(sdhi0_resources),
+					  &sdhi0_info, sizeof(struct sh_mobile_sdhi_info));
+
+	platform_device_register_resndata(&platform_bus, "sh_mobile_sdhi", 1,
+					  sdhi1_resources, ARRAY_SIZE(sdhi1_resources),
+					  &sdhi1_info, sizeof(struct sh_mobile_sdhi_info));
+
+	platform_device_register_resndata(&platform_bus, "sh_mobile_sdhi", 2,
+					  sdhi2_resources, ARRAY_SIZE(sdhi2_resources),
+					  &sdhi2_info, sizeof(struct sh_mobile_sdhi_info));
+
 }
 
 /*
···
 static void __init koelsch_init(void)
 {
 	koelsch_add_standard_devices();
+
+	irq_set_irq_type(irq_pin(0), IRQ_TYPE_LEVEL_LOW);
 
 	if (IS_ENABLED(CONFIG_PHYLIB))
 		phy_register_fixup_for_id("r8a7791-ether-ff:01",

arch/arm/mach-shmobile/board-kzm9d-reference.c

···
-/*
- * kzm9d board support - Reference DT implementation
- *
- * Copyright (C) 2013  Renesas Solutions Corp.
- * Copyright (C) 2013  Magnus Damm
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-#include <linux/init.h>
-#include <linux/of_platform.h>
-#include <mach/emev2.h>
-#include <mach/common.h>
-#include <asm/mach/arch.h>
-
-static void __init kzm9d_add_standard_devices(void)
-{
-	if (!IS_ENABLED(CONFIG_COMMON_CLK))
-		emev2_clock_init();
-
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-}
-
-static const char *kzm9d_boards_compat_dt[] __initdata = {
-	"renesas,kzm9d",
-	"renesas,kzm9d-reference",
-	NULL,
-};
-
-DT_MACHINE_START(KZM9D_DT, "kzm9d")
-	.smp		= smp_ops(emev2_smp_ops),
-	.map_io		= emev2_map_io,
-	.init_early	= emev2_init_delay,
-	.init_machine	= kzm9d_add_standard_devices,
-	.init_late	= shmobile_init_late,
-	.dt_compat	= kzm9d_boards_compat_dt,
-MACHINE_END

arch/arm/mach-shmobile/board-lager-reference.c

···
 
 #include <linux/clk.h>
 #include <linux/clkdev.h>
+#include <linux/dma-mapping.h>
 #include <linux/init.h>
 #include <linux/of_platform.h>
+#include <linux/platform_data/rcar-du.h>
 #include <mach/common.h>
+#include <mach/irqs.h>
 #include <mach/rcar-gen2.h>
 #include <mach/r8a7790.h>
 #include <asm/mach/arch.h>
 
+/* DU */
+static struct rcar_du_encoder_data lager_du_encoders[] = {
+	{
+		.type = RCAR_DU_ENCODER_VGA,
+		.output = RCAR_DU_OUTPUT_DPAD0,
+	}, {
+		.type = RCAR_DU_ENCODER_NONE,
+		.output = RCAR_DU_OUTPUT_LVDS1,
+		.connector.lvds.panel = {
+			.width_mm = 210,
+			.height_mm = 158,
+			.mode = {
+				.clock = 65000,
+				.hdisplay = 1024,
+				.hsync_start = 1048,
+				.hsync_end = 1184,
+				.htotal = 1344,
+				.vdisplay = 768,
+				.vsync_start = 771,
+				.vsync_end = 777,
+				.vtotal = 806,
+				.flags = 0,
+			},
+		},
+	},
+};
+
+static struct rcar_du_platform_data lager_du_pdata = {
+	.encoders = lager_du_encoders,
+	.num_encoders = ARRAY_SIZE(lager_du_encoders),
+};
+
+static const struct resource du_resources[] __initconst = {
+	DEFINE_RES_MEM(0xfeb00000, 0x70000),
+	DEFINE_RES_MEM_NAMED(0xfeb90000, 0x1c, "lvds.0"),
+	DEFINE_RES_MEM_NAMED(0xfeb94000, 0x1c, "lvds.1"),
+	DEFINE_RES_IRQ(gic_spi(256)),
+	DEFINE_RES_IRQ(gic_spi(268)),
+	DEFINE_RES_IRQ(gic_spi(269)),
+};
+
+static void __init lager_add_du_device(void)
+{
+	struct platform_device_info info = {
+		.name = "rcar-du-r8a7790",
+		.id = -1,
+		.res = du_resources,
+		.num_res = ARRAY_SIZE(du_resources),
+		.data = &lager_du_pdata,
+		.size_data = sizeof(lager_du_pdata),
+		.dma_mask = DMA_BIT_MASK(32),
+	};
+
+	platform_device_register_full(&info);
+}
+
 static void __init lager_add_standard_devices(void)
 {
-#ifdef CONFIG_COMMON_CLK
 	/*
-	 * This is a really crude hack to provide clkdev support to the SCIF
-	 * and CMT devices until they get moved to DT.
+	 * This is a really crude hack to provide clkdev support to platform
+	 * devices until they get moved to DT.
 	 */
-	static const char * const scif_names[] = {
-		"scifa0", "scifa1", "scifb0", "scifb1",
-		"scifb2", "scifa2", "scif0", "scif1",
-		"hscif0", "hscif1",
+	static const struct clk_name {
+		const char *clk;
+		const char *con_id;
+		const char *dev_id;
+	} clk_names[] = {
+		{ "cmt0", NULL, "sh_cmt.0" },
+		{ "scifa0", NULL, "sh-sci.0" },
+		{ "scifa1", NULL, "sh-sci.1" },
+		{ "scifb0", NULL, "sh-sci.2" },
+		{ "scifb1", NULL, "sh-sci.3" },
+		{ "scifb2", NULL, "sh-sci.4" },
+		{ "scifa2", NULL, "sh-sci.5" },
+		{ "scif0", NULL, "sh-sci.6" },
+		{ "scif1", NULL, "sh-sci.7" },
+		{ "hscif0", NULL, "sh-sci.8" },
+		{ "hscif1", NULL, "sh-sci.9" },
+		{ "du0", "du.0", "rcar-du-r8a7790" },
+		{ "du1", "du.1", "rcar-du-r8a7790" },
+		{ "du2", "du.2", "rcar-du-r8a7790" },
+		{ "lvds0", "lvds.0", "rcar-du-r8a7790" },
+		{ "lvds1", "lvds.1", "rcar-du-r8a7790" },
 	};
 	struct clk *clk;
 	unsigned int i;
 
-	for (i = 0; i < ARRAY_SIZE(scif_names); ++i) {
-		clk = clk_get(NULL, scif_names[i]);
-		if (clk) {
-			clk_register_clkdev(clk, NULL, "sh-sci.%u", i);
+	for (i = 0; i < ARRAY_SIZE(clk_names); ++i) {
+		clk = clk_get(NULL, clk_names[i].clk);
+		if (!IS_ERR(clk)) {
+			clk_register_clkdev(clk, clk_names[i].con_id,
+					    clk_names[i].dev_id);
 			clk_put(clk);
 		}
 	}
 
-	clk = clk_get(NULL, "cmt0");
-	if (clk) {
-		clk_register_clkdev(clk, NULL, "sh_cmt.0");
-		clk_put(clk);
-	}
-#else
-	r8a7790_clock_init();
-#endif
-
 	r8a7790_add_dt_devices();
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+
+	lager_add_du_device();
 }
 
 static const char *lager_boards_compat_dt[] __initdata = {

arch/arm/mach-shmobile/board-lager.c

···
 /*
  * Lager board support
  *
- * Copyright (C) 2013  Renesas Solutions Corp.
+ * Copyright (C) 2013-2014  Renesas Solutions Corp.
  * Copyright (C) 2013  Magnus Damm
+ * Copyright (C) 2014  Cogent Embedded, Inc.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
···
 
 #include <linux/gpio.h>
 #include <linux/gpio_keys.h>
+#include <linux/i2c.h>
 #include <linux/input.h>
 #include <linux/interrupt.h>
+#include <linux/irq.h>
 #include <linux/kernel.h>
 #include <linux/leds.h>
+#include <linux/mfd/tmio.h>
 #include <linux/mmc/host.h>
 #include <linux/mmc/sh_mmcif.h>
+#include <linux/mmc/sh_mobile_sdhi.h>
 #include <linux/pinctrl/machine.h>
+#include <linux/platform_data/camera-rcar.h>
 #include <linux/platform_data/gpio-rcar.h>
 #include <linux/platform_data/rcar-du.h>
+#include <linux/platform_data/usb-rcar-gen2-phy.h>
 #include <linux/platform_device.h>
 #include <linux/phy.h>
 #include <linux/regulator/driver.h>
···
 #include <linux/regulator/gpio-regulator.h>
 #include <linux/regulator/machine.h>
 #include <linux/sh_eth.h>
+#include <linux/usb/phy.h>
+#include <linux/usb/renesas_usbhs.h>
 #include <mach/common.h>
 #include <mach/irqs.h>
 #include <mach/r8a7790.h>
+#include <media/soc_camera.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <linux/mtd/partitions.h>
···
 #include <linux/spi/flash.h>
 #include <linux/spi/rspi.h>
 #include <linux/spi/spi.h>
+#include <sound/rcar_snd.h>
+#include <sound/simple_card.h>
+
+/*
+ * SSI-AK4643
+ *
+ * SW1: 1: AK4643
+ *      2: CN22
+ *      3: ADV7511
+ *
+ * this command is required when playback.
+ *
+ * # amixer set "LINEOUT Mixer DACL" on
+ */
+
+/*
+ * SDHI0 (CN8)
+ *
+ * JP3:  pin1
+ * SW20: pin1
+
+ * GP5_24:	1:  VDD  3.3V (defult)
+ *		0:  VDD  0.0V
+ * GP5_29:	1:  VccQ 3.3V (defult)
+ *		0:  VccQ 1.8V
+ *
+ */
 
 /* DU */
 static struct rcar_du_encoder_data lager_du_encoders[] = {
···
 /* Ether */
 static const struct sh_eth_plat_data ether_pdata __initconst = {
 	.phy			= 0x1,
+	.phy_irq		= irq_pin(0),
 	.edmac_endian		= EDMAC_LITTLE_ENDIAN,
 	.phy_interface		= PHY_INTERFACE_MODE_RMII,
 	.ether_link_active_low	= 1,
···
 static const struct resource ether_resources[] __initconst = {
 	DEFINE_RES_MEM(0xee700000, 0x400),
 	DEFINE_RES_IRQ(gic_spi(162)),
+};
+
+static const struct platform_device_info ether_info __initconst = {
+	.parent		= &platform_bus,
+	.name		= "r8a7790-ether",
+	.id		= -1,
+	.res		= ether_resources,
+	.num_res	= ARRAY_SIZE(ether_resources),
+	.data		= &ether_pdata,
+	.size_data	= sizeof(ether_pdata),
+	.dma_mask	= DMA_BIT_MASK(32),
 };
 
 /* SPI Flash memory (Spansion S25FL512SAGMFIG11 64Mb) */
···
 	},
 };
 
-static struct flash_platform_data spi_flash_data = {
+static const struct flash_platform_data spi_flash_data = {
 	.name           = "m25p80",
 	.parts          = spi_flash_part,
 	.nr_parts       = ARRAY_SIZE(spi_flash_part),
···
 /* QSPI resource */
 static const struct resource qspi_resources[] __initconst = {
 	DEFINE_RES_MEM(0xe6b10000, 0x1000),
-	DEFINE_RES_IRQ(gic_spi(184)),
+	DEFINE_RES_IRQ_NAMED(gic_spi(184), "mux"),
 };
+
+/* VIN */
+static const struct resource vin_resources[] __initconst = {
+	/* VIN0 */
+	DEFINE_RES_MEM(0xe6ef0000, 0x1000),
+	DEFINE_RES_IRQ(gic_spi(188)),
+	/* VIN1 */
+	DEFINE_RES_MEM(0xe6ef1000, 0x1000),
+	DEFINE_RES_IRQ(gic_spi(189)),
+};
+
+static void __init lager_add_vin_device(unsigned idx,
+					struct rcar_vin_platform_data *pdata)
+{
+	struct platform_device_info vin_info = {
+		.parent		= &platform_bus,
+		.name		= "r8a7790-vin",
+		.id		= idx,
+		.res		= &vin_resources[idx * 2],
+		.num_res	= 2,
+		.dma_mask	= DMA_BIT_MASK(32),
+		.data		= pdata,
+		.size_data	= sizeof(*pdata),
+	};
+
+	BUG_ON(idx > 1);
+
+	platform_device_register_full(&vin_info);
+}
+
+#define LAGER_CAMERA(idx, name, addr, pdata, flag)			\
+static struct i2c_board_info i2c_cam##idx##_device = {			\
+	I2C_BOARD_INFO(name, addr),					\
+};									\
+									\
+static struct rcar_vin_platform_data vin##idx##_pdata = {		\
+	.flags = flag,							\
+};									\
+									\
+static struct soc_camera_link cam##idx##_link = {			\
+	.bus_id = idx,							\
+	.board_info = &i2c_cam##idx##_device,				\
+	.i2c_adapter_id = 2,						\
+	.module_name = name,						\
+	.priv = pdata,							\
+}
+
+/* Camera 0 is not currently supported due to adv7612 support missing */
+LAGER_CAMERA(1, "adv7180", 0x20, NULL, RCAR_VIN_BT656);
+
+static void __init lager_add_camera1_device(void)
+{
+	platform_device_register_data(&platform_bus, "soc-camera-pdrv", 1,
+				      &cam1_link, sizeof(cam1_link));
+	lager_add_vin_device(1, &vin1_pdata);
+}
+
+/* SATA1 */
+static const struct resource sata1_resources[] __initconst = {
+	DEFINE_RES_MEM(0xee500000, 0x2000),
+	DEFINE_RES_IRQ(gic_spi(106)),
+};
+
+static const struct platform_device_info sata1_info __initconst = {
+	.parent		= &platform_bus,
+	.name		= "sata-r8a7790",
+	.id		= 1,
+	.res		= sata1_resources,
+	.num_res	= ARRAY_SIZE(sata1_resources),
+	.dma_mask	= DMA_BIT_MASK(32),
+};
+
+/* USBHS */
+static const struct resource usbhs_resources[] __initconst = {
+	DEFINE_RES_MEM(0xe6590000, 0x100),
+	DEFINE_RES_IRQ(gic_spi(107)),
+};
+
+struct usbhs_private {
+	struct renesas_usbhs_platform_info info;
+	struct usb_phy *phy;
+};
+
+#define usbhs_get_priv(pdev) \
+	container_of(renesas_usbhs_get_info(pdev), struct usbhs_private, info)
+
+static int usbhs_power_ctrl(struct platform_device *pdev,
+				void __iomem *base, int enable)
+{
+	struct usbhs_private *priv = usbhs_get_priv(pdev);
+
+	if (!priv->phy)
+		return -ENODEV;
+
+	if (enable) {
+		int retval = usb_phy_init(priv->phy);
+
+		if (!retval)
+			retval = usb_phy_set_suspend(priv->phy, 0);
+		return retval;
+	}
+
+	usb_phy_set_suspend(priv->phy, 1);
+	usb_phy_shutdown(priv->phy);
+	return 0;
+}
+
+static int usbhs_hardware_init(struct platform_device *pdev)
+{
+	struct usbhs_private *priv = usbhs_get_priv(pdev);
+	struct usb_phy *phy;
+	int ret;
+
+	/* USB0 Function - use PWEN as GPIO input to detect DIP Switch SW5
+	 * setting to avoid VBUS short circuit due to wrong cable.
+	 * PWEN should be pulled up high if USB Function is selected by SW5
+	 */
+	gpio_request_one(RCAR_GP_PIN(5, 18), GPIOF_IN, NULL); /* USB0_PWEN */
+	if (!gpio_get_value(RCAR_GP_PIN(5, 18))) {
+		pr_warn("Error: USB Function not selected - check SW5 + SW6\n");
+		ret = -ENOTSUPP;
+		goto error;
+	}
+
+	phy = usb_get_phy_dev(&pdev->dev, 0);
+	if (IS_ERR(phy)) {
+		ret = PTR_ERR(phy);
+		goto error;
+	}
+
+	priv->phy = phy;
+	return 0;
+ error:
+	gpio_free(RCAR_GP_PIN(5, 18));
+	return ret;
+}
+
+static int usbhs_hardware_exit(struct platform_device *pdev)
+{
+	struct usbhs_private *priv = usbhs_get_priv(pdev);
+
+	if (!priv->phy)
+		return 0;
+
+	usb_put_phy(priv->phy);
+	priv->phy = NULL;
+
+	gpio_free(RCAR_GP_PIN(5, 18));
+	return 0;
+}
+
+static int usbhs_get_id(struct platform_device *pdev)
+{
+	return USBHS_GADGET;
+}
+
+static u32 lager_usbhs_pipe_type[] = {
+	USB_ENDPOINT_XFER_CONTROL,
+	USB_ENDPOINT_XFER_ISOC,
+	USB_ENDPOINT_XFER_ISOC,
+	USB_ENDPOINT_XFER_BULK,
+	USB_ENDPOINT_XFER_BULK,
+	USB_ENDPOINT_XFER_BULK,
+	USB_ENDPOINT_XFER_INT,
+	USB_ENDPOINT_XFER_INT,
+	USB_ENDPOINT_XFER_INT,
+	USB_ENDPOINT_XFER_BULK,
+	USB_ENDPOINT_XFER_BULK,
+	USB_ENDPOINT_XFER_BULK,
+	USB_ENDPOINT_XFER_BULK,
+	USB_ENDPOINT_XFER_BULK,
+	USB_ENDPOINT_XFER_BULK,
+	USB_ENDPOINT_XFER_BULK,
+};
+
+static struct usbhs_private usbhs_priv __initdata = {
+	.info = {
+		.platform_callback = {
+			.power_ctrl	= usbhs_power_ctrl,
+			.hardware_init	= usbhs_hardware_init,
+			.hardware_exit	= usbhs_hardware_exit,
+			.get_id		= usbhs_get_id,
+		},
+		.driver_param = {
+			.buswait_bwait	= 4,
+			.pipe_type = lager_usbhs_pipe_type,
+			.pipe_size = ARRAY_SIZE(lager_usbhs_pipe_type),
+		},
+	}
+};
+
+static void __init lager_register_usbhs(void)
+{
+	usb_bind_phy("renesas_usbhs", 0, "usb_phy_rcar_gen2");
+	platform_device_register_resndata(&platform_bus,
+					  "renesas_usbhs", -1,
+					  usbhs_resources,
+					  ARRAY_SIZE(usbhs_resources),
+					  &usbhs_priv.info,
+					  sizeof(usbhs_priv.info));
+}
+
+/* USBHS PHY */
+static const struct rcar_gen2_phy_platform_data usbhs_phy_pdata __initconst = {
+	.chan0_pci = 0,	/* Channel 0 is USBHS */
+	.chan2_pci = 1,	/* Channel 2 is PCI USB */
+};
+
+static const struct resource usbhs_phy_resources[] __initconst = {
+	DEFINE_RES_MEM(0xe6590100, 0x100),
+};
+
+/* I2C */
+static struct i2c_board_info i2c2_devices[] = {
+	{
+		I2C_BOARD_INFO("ak4643", 0x12),
+	}
+};
+
+/* Sound */
+static struct resource rsnd_resources[] __initdata = {
+	[RSND_GEN2_SCU]  = DEFINE_RES_MEM(0xec500000, 0x1000),
+	[RSND_GEN2_ADG]  = DEFINE_RES_MEM(0xec5a0000, 0x100),
+	[RSND_GEN2_SSIU] = DEFINE_RES_MEM(0xec540000, 0x1000),
+	[RSND_GEN2_SSI]  = DEFINE_RES_MEM(0xec541000, 0x1280),
+};
+
+static struct rsnd_ssi_platform_info rsnd_ssi[] = {
+	RSND_SSI_SET(0, 0, gic_spi(370), RSND_SSI_PLAY),
+	RSND_SSI_SET(0, 0, gic_spi(371), RSND_SSI_CLK_PIN_SHARE),
+};
+
+static struct rsnd_scu_platform_info rsnd_scu[2] = {
+	/* no member at this point */
+};
+
+static struct rcar_snd_info rsnd_info = {
+	.flags		= RSND_GEN2,
+	.ssi_info	= rsnd_ssi,
+	.ssi_info_nr	= ARRAY_SIZE(rsnd_ssi),
+	.scu_info	= rsnd_scu,
+	.scu_info_nr	= ARRAY_SIZE(rsnd_scu),
+};
+
+static struct asoc_simple_card_info rsnd_card_info = {
+	.name		= "AK4643",
+	.card		= "SSI01-AK4643",
+	.codec		= "ak4642-codec.2-0012",
+	.platform	= "rcar_sound",
+	.daifmt		= SND_SOC_DAIFMT_LEFT_J,
+	.cpu_dai = {
+		.name	= "rcar_sound",
+		.fmt	= SND_SOC_DAIFMT_CBS_CFS,
+	},
+	.codec_dai = {
+		.name	= "ak4642-hifi",
+		.fmt	= SND_SOC_DAIFMT_CBM_CFM,
+		.sysclk	= 11289600,
+	},
+};
+
+static void __init lager_add_rsnd_device(void)
+{
+	struct platform_device_info cardinfo = {
+		.parent         = &platform_bus,
+		.name           = "asoc-simple-card",
+		.id             = -1,
+		.data           = &rsnd_card_info,
+		.size_data      = sizeof(struct asoc_simple_card_info),
+		.dma_mask       = DMA_BIT_MASK(32),
+	};
+
+	i2c_register_board_info(2, i2c2_devices,
+				ARRAY_SIZE(i2c2_devices));
+
+	platform_device_register_resndata(
+		&platform_bus, "rcar_sound", -1,
+		rsnd_resources, ARRAY_SIZE(rsnd_resources),
+		&rsnd_info, sizeof(rsnd_info));
+
+	platform_device_register_full(&cardinfo);
+}
+
+/* SDHI0 */
+static struct sh_mobile_sdhi_info sdhi0_info __initdata = {
+	.tmio_caps	= MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |
+			  MMC_CAP_POWER_OFF_CARD,
+	.tmio_caps2	= MMC_CAP2_NO_MULTI_READ,
+	.tmio_flags	= TMIO_MMC_HAS_IDLE_WAIT |
+			  TMIO_MMC_WRPROTECT_DISABLE,
+};
+
+static struct resource sdhi0_resources[] __initdata = {
+	DEFINE_RES_MEM(0xee100000, 0x200),
+	DEFINE_RES_IRQ(gic_spi(165)),
+};
+
+/* SDHI2 */
+static struct sh_mobile_sdhi_info sdhi2_info __initdata = {
+	.tmio_caps	= MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |
+			  MMC_CAP_POWER_OFF_CARD,
+	.tmio_caps2	= MMC_CAP2_NO_MULTI_READ,
+	.tmio_flags	= TMIO_MMC_HAS_IDLE_WAIT |
+			  TMIO_MMC_WRPROTECT_DISABLE,
+};
+
+static struct resource sdhi2_resources[] __initdata = {
+	DEFINE_RES_MEM(0xee140000, 0x100),
+	DEFINE_RES_IRQ(gic_spi(167)),
+};
+
+/* Internal PCI1 */
+static const struct resource pci1_resources[] __initconst = {
+	DEFINE_RES_MEM(0xee0b0000, 0x10000),	/* CFG */
+	DEFINE_RES_MEM(0xee0a0000, 0x10000),	/* MEM */
+	DEFINE_RES_IRQ(gic_spi(112)),
+};
+
+static const struct platform_device_info pci1_info __initconst = {
+	.parent		= &platform_bus,
+	.name		= "pci-rcar-gen2",
+	.id		= 1,
+	.res		= pci1_resources,
+	.num_res	= ARRAY_SIZE(pci1_resources),
+	.dma_mask	= DMA_BIT_MASK(32),
+};
+
+static void __init lager_add_usb1_device(void)
+{
+	platform_device_register_full(&pci1_info);
+}
+
+/* Internal PCI2 */
+static const struct resource pci2_resources[] __initconst = {
+	DEFINE_RES_MEM(0xee0d0000, 0x10000),	/* CFG */
+	DEFINE_RES_MEM(0xee0c0000, 0x10000),	/* MEM */
+	DEFINE_RES_IRQ(gic_spi(113)),
+};
+
+static const struct platform_device_info pci2_info __initconst = {
+	.parent		= &platform_bus,
+	.name		= "pci-rcar-gen2",
+	.id		= 2,
+	.res		= pci2_resources,
+	.num_res	= ARRAY_SIZE(pci2_resources),
+	.dma_mask	= DMA_BIT_MASK(32),
+};
+
+static void __init lager_add_usb2_device(void)
+{
+	platform_device_register_full(&pci2_info);
+}
 
 static const struct pinctrl_map lager_pinctrl_map[] = {
 	/* DU (CN10: ARGB0, CN13: LVDS) */
···
 				  "du_sync_1", "du"),
 	PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7790", "pfc-r8a7790",
 				  "du_clk_out_0", "du"),
+	/* I2C2 */
+	PIN_MAP_MUX_GROUP_DEFAULT("i2c-rcar.2", "pfc-r8a7790",
+				  "i2c2", "i2c2"),
+	/* QSPI */
+	PIN_MAP_MUX_GROUP_DEFAULT("qspi.0", "pfc-r8a7790",
+				  "qspi_ctrl", "qspi"),
+	PIN_MAP_MUX_GROUP_DEFAULT("qspi.0", "pfc-r8a7790",
+				  "qspi_data4", "qspi"),
 	/* SCIF0 (CN19: DEBUG SERIAL0) */
 	PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.6", "pfc-r8a7790",
 				  "scif0_data", "scif0"),
 	/* SCIF1 (CN20: DEBUG SERIAL1) */
 	PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.7", "pfc-r8a7790",
 				  "scif1_data", "scif1"),
+	/* SDHI0 */
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7790",
+				  "sdhi0_data4", "sdhi0"),
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7790",
+				  "sdhi0_ctrl", "sdhi0"),
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7790",
+				  "sdhi0_cd", "sdhi0"),
+	/* SDHI2 */
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.2", "pfc-r8a7790",
+				  "sdhi2_data4", "sdhi2"),
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.2", "pfc-r8a7790",
+				  "sdhi2_ctrl", "sdhi2"),
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.2", "pfc-r8a7790",
+				  "sdhi2_cd", "sdhi2"),
+	/* SSI (CN17: sound) */
+	PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7790",
+				  "ssi0129_ctrl", "ssi"),
+	PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7790",
+				  "ssi0_data", "ssi"),
+	PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7790",
+				  "ssi1_data", "ssi"),
+	PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7790",
+				  "audio_clk_a", "audio_clk"),
 	/* MMCIF1 */
 	PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.1", "pfc-r8a7790",
 				  "mmc1_data8", "mmc1"),
···
 				  "eth_rmii", "eth"),
 	PIN_MAP_MUX_GROUP_DEFAULT("r8a7790-ether", "pfc-r8a7790",
 				  "intc_irq0", "intc"),
+	/* VIN0 */
+	PIN_MAP_MUX_GROUP_DEFAULT("r8a7790-vin.0", "pfc-r8a7790",
+				  "vin0_data24", "vin0"),
+	PIN_MAP_MUX_GROUP_DEFAULT("r8a7790-vin.0", "pfc-r8a7790",
+				  "vin0_sync", "vin0"),
+	PIN_MAP_MUX_GROUP_DEFAULT("r8a7790-vin.0", "pfc-r8a7790",
+				  "vin0_field", "vin0"),
+	PIN_MAP_MUX_GROUP_DEFAULT("r8a7790-vin.0", "pfc-r8a7790",
+				  "vin0_clkenb", "vin0"),
+	PIN_MAP_MUX_GROUP_DEFAULT("r8a7790-vin.0", "pfc-r8a7790",
+				  "vin0_clk", "vin0"),
+	/* VIN1 */
+	PIN_MAP_MUX_GROUP_DEFAULT("r8a7790-vin.1", "pfc-r8a7790",
+				  "vin1_data8", "vin1"),
+	PIN_MAP_MUX_GROUP_DEFAULT("r8a7790-vin.1", "pfc-r8a7790",
+				  "vin1_clk", "vin1"),
+	/* USB0 */
+	PIN_MAP_MUX_GROUP_DEFAULT("renesas_usbhs", "pfc-r8a7790",
+				  "usb0_ovc_vbus", "usb0"),
+	/* USB1 */
+	PIN_MAP_MUX_GROUP_DEFAULT("pci-rcar-gen2.1", "pfc-r8a7790",
+				  "usb1", "usb1"),
+	/* USB2 */
+	PIN_MAP_MUX_GROUP_DEFAULT("pci-rcar-gen2.2", "pfc-r8a7790",
+				  "usb2", "usb2"),
 };
 
 static void __init lager_add_standard_devices(void)
···
 					  mmcif1_resources, ARRAY_SIZE(mmcif1_resources),
 					  &mmcif1_pdata, sizeof(mmcif1_pdata));
 
-	platform_device_register_resndata(&platform_bus, "r8a7790-ether", -1,
-					  ether_resources,
-					  ARRAY_SIZE(ether_resources),
-					  &ether_pdata, sizeof(ether_pdata));
+	platform_device_register_full(&ether_info);
 
 	lager_add_du_device();
 
···
 				      &vccq_sdhi0_info, sizeof(struct gpio_regulator_config));
 	platform_device_register_data(&platform_bus, "gpio-regulator", gpio_regulator_idx++,
 				      &vccq_sdhi2_info, sizeof(struct gpio_regulator_config));
+
+	lager_add_camera1_device();
+
+	platform_device_register_full(&sata1_info);
+
+	platform_device_register_resndata(&platform_bus, "usb_phy_rcar_gen2",
+					  -1, usbhs_phy_resources,
+					  ARRAY_SIZE(usbhs_phy_resources),
+					  &usbhs_phy_pdata,
+					  sizeof(usbhs_phy_pdata));
+	lager_register_usbhs();
+	lager_add_usb1_device();
+	lager_add_usb2_device();
+
+	lager_add_rsnd_device();
+
+	platform_device_register_resndata(&platform_bus, "sh_mobile_sdhi", 0,
+					  sdhi0_resources, ARRAY_SIZE(sdhi0_resources),
+					  &sdhi0_info, sizeof(struct sh_mobile_sdhi_info));
+	platform_device_register_resndata(&platform_bus, "sh_mobile_sdhi", 2,
+					  sdhi2_resources, ARRAY_SIZE(sdhi2_resources),
+					  &sdhi2_info, sizeof(struct sh_mobile_sdhi_info));
 }
 
 /*
···
 static void __init lager_init(void)
 {
 	lager_add_standard_devices();
+
+	irq_set_irq_type(irq_pin(0), IRQ_TYPE_LEVEL_LOW);
 
 	if (IS_ENABLED(CONFIG_PHYLIB))
 		phy_register_fixup_for_id("r8a7790-ether-ff:01",

arch/arm/mach-shmobile/include/mach/head-kzm9g.txt

···
+LIST "KZM9G low-level initialization routine."
+LIST "Adapted from u-boot KZM9G support code."
+
+LIST "Copyright (C) 2013 Ulrich Hecht"
+
+LIST "This program is free software; you can redistribute it and/or modify"
+LIST "it under the terms of the GNU General Public License version 2 as"
+LIST "published by the Free Software Foundation."
+
+LIST "This program is distributed in the hope that it will be useful,"
+LIST "but WITHOUT ANY WARRANTY; without even the implied warranty of"
+LIST "MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the"
+LIST "GNU General Public License for more details."
+
+
+LIST "Register definitions:"
+
+LIST "Secure control register"
+#define LIFEC_SEC_SRC (0xE6110008)
+
+LIST "RWDT"
+#define RWDT_BASE   (0xE6020000)
+#define RWTCSRA0 (RWDT_BASE + 0x04)
+
+LIST "HPB Semaphore Control Registers"
+#define HPBSCR_BASE (0xE6000000)
+#define HPBCTRL6 (HPBSCR_BASE + 0x1030)
+
+#define SBSC1_BASE  (0xFE400000)
+#define SDCR0A		(SBSC1_BASE + 0x0008)
+#define SDCR1A		(SBSC1_BASE + 0x000C)
+#define SDPCRA		(SBSC1_BASE + 0x0010)
+#define SDCR0SA		(SBSC1_BASE + 0x0018)
+#define SDCR1SA		(SBSC1_BASE + 0x001C)
+#define RTCSRA		(SBSC1_BASE + 0x0020)
+#define RTCORA		(SBSC1_BASE + 0x0028)
+#define RTCORHA		(SBSC1_BASE + 0x002C)
+#define SDWCRC0A	(SBSC1_BASE + 0x0040)
+#define SDWCRC1A	(SBSC1_BASE + 0x0044)
+#define SDWCR00A	(SBSC1_BASE + 0x0048)
+#define SDWCR01A	(SBSC1_BASE + 0x004C)
+#define SDWCR10A	(SBSC1_BASE + 0x0050)
+#define SDWCR11A	(SBSC1_BASE + 0x0054)
+#define SDWCR2A		(SBSC1_BASE + 0x0060)
+#define SDWCRC2A	(SBSC1_BASE + 0x0064)
+#define ZQCCRA		(SBSC1_BASE + 0x0068)
+#define SDMRACR0A	(SBSC1_BASE + 0x0084)
+#define SDMRTMPCRA	(SBSC1_BASE + 0x008C)
+#define SDMRTMPMSKA	(SBSC1_BASE + 0x0094)
+#define SDGENCNTA	(SBSC1_BASE + 0x009C)
+#define SDDRVCR0A	(SBSC1_BASE + 0x00B4)
+#define DLLCNT0A	(SBSC1_BASE + 0x0354)
+
+#define SDMRA1  (0xFE500000)
+#define SDMRA2  (0xFE5C0000)
+#define SDMRA3  (0xFE504000)
+
+#define SBSC2_BASE  (0xFB400000)
+#define SDCR0B		(SBSC2_BASE + 0x0008)
+#define SDCR1B		(SBSC2_BASE + 0x000C)
+#define SDPCRB		(SBSC2_BASE + 0x0010)
+#define SDCR0SB		(SBSC2_BASE + 0x0018)
+#define SDCR1SB		(SBSC2_BASE + 0x001C)
+#define RTCSRB		(SBSC2_BASE + 0x0020)
+#define RTCORB		(SBSC2_BASE + 0x0028)
+#define RTCORHB		(SBSC2_BASE + 0x002C)
+#define SDWCRC0B	(SBSC2_BASE + 0x0040)
+#define SDWCRC1B	(SBSC2_BASE + 0x0044)
+#define SDWCR00B	(SBSC2_BASE + 0x0048)
+#define SDWCR01B	(SBSC2_BASE + 0x004C)
+#define SDWCR10B	(SBSC2_BASE + 0x0050)
+#define SDWCR11B	(SBSC2_BASE + 0x0054)
+#define SDPDCR0B	(SBSC2_BASE + 0x0058)
+#define SDWCR2B		(SBSC2_BASE + 0x0060)
+#define SDWCRC2B	(SBSC2_BASE + 0x0064)
+#define ZQCCRB		(SBSC2_BASE + 0x0068)
+#define SDMRACR0B	(SBSC2_BASE + 0x0084)
+#define SDMRTMPCRB	(SBSC2_BASE + 0x008C)
+#define SDMRTMPMSKB	(SBSC2_BASE + 0x0094)
+#define SDGENCNTB	(SBSC2_BASE + 0x009C)
+#define DPHYCNT0B	(SBSC2_BASE + 0x00A0)
+#define DPHYCNT1B	(SBSC2_BASE + 0x00A4)
+#define DPHYCNT2B	(SBSC2_BASE + 0x00A8)
+#define SDDRVCR0B	(SBSC2_BASE + 0x00B4)
+#define DLLCNT0B	(SBSC2_BASE + 0x0354)
+
+#define SDMRB1  (0xFB500000)
+#define SDMRB2  (0xFB5C0000)
+#define SDMRB3  (0xFB504000)
+
+#define CPG_BASE   (0xE6150000)
+#define FRQCRA		(CPG_BASE + 0x0000)
+#define FRQCRB		(CPG_BASE + 0x0004)
+#define FRQCRD		(CPG_BASE + 0x00E4)
+#define VCLKCR1		(CPG_BASE + 0x0008)
+#define VCLKCR2		(CPG_BASE + 0x000C)
+#define VCLKCR3		(CPG_BASE + 0x001C)
+#define ZBCKCR		(CPG_BASE + 0x0010)
+#define FLCKCR		(CPG_BASE + 0x0014)
+#define SD0CKCR		(CPG_BASE + 0x0074)
+#define SD1CKCR		(CPG_BASE + 0x0078)
+#define SD2CKCR		(CPG_BASE + 0x007C)
+#define FSIACKCR	(CPG_BASE + 0x0018)
+#define SUBCKCR		(CPG_BASE + 0x0080)
+#define SPUACKCR	(CPG_BASE + 0x0084)
+#define SPUVCKCR	(CPG_BASE + 0x0094)
+#define MSUCKCR		(CPG_BASE + 0x0088)
+#define HSICKCR		(CPG_BASE + 0x008C)
+#define FSIBCKCR	(CPG_BASE + 0x0090)
+#define MFCK1CR		(CPG_BASE + 0x0098)
+#define MFCK2CR		(CPG_BASE + 0x009C)
+#define DSITCKCR	(CPG_BASE + 0x0060)
+#define DSI0PCKCR	(CPG_BASE + 0x0064)
+#define DSI1PCKCR	(CPG_BASE + 0x0068)
+#define DSI0PHYCR	(CPG_BASE + 0x006C)
+#define DVFSCR3		(CPG_BASE + 0x0174)
+#define DVFSCR4		(CPG_BASE + 0x0178)
+#define DVFSCR5		(CPG_BASE + 0x017C)
+#define MPMODE		(CPG_BASE + 0x00CC)
+
+#define PLLECR		(CPG_BASE + 0x00D0)
+#define PLL0CR		(CPG_BASE + 0x00D8)
+#define PLL1CR		(CPG_BASE + 0x0028)
+#define PLL2CR		(CPG_BASE + 0x002C)
+#define PLL3CR		(CPG_BASE + 0x00DC)
+#define PLL0STPCR	(CPG_BASE + 0x00F0)
+#define PLL1STPCR	(CPG_BASE + 0x00C8)
+#define PLL2STPCR	(CPG_BASE + 0x00F8)
+#define PLL3STPCR	(CPG_BASE + 0x00FC)
+#define RMSTPCR0	(CPG_BASE + 0x0110)
+#define RMSTPCR1	(CPG_BASE + 0x0114)
+#define RMSTPCR2	(CPG_BASE + 0x0118)
+#define RMSTPCR3	(CPG_BASE + 0x011C)
+#define RMSTPCR4	(CPG_BASE + 0x0120)
+#define RMSTPCR5	(CPG_BASE + 0x0124)
+#define SMSTPCR0	(CPG_BASE + 0x0130)
+#define SMSTPCR2	(CPG_BASE + 0x0138)
+#define SMSTPCR3	(CPG_BASE + 0x013C)
+#define CPGXXCR4	(CPG_BASE + 0x0150)
+#define SRCR0		(CPG_BASE + 0x80A0)
+#define SRCR2		(CPG_BASE + 0x80B0)
+#define SRCR3		(CPG_BASE + 0x80A8)
+#define VREFCR		(CPG_BASE + 0x00EC)
+#define PCLKCR		(CPG_BASE + 0x1020)
+
+#define PORT32CR (0xE6051020)
+#define PORT33CR (0xE6051021)
+#define PORT34CR (0xE6051022)
+#define PORT35CR (0xE6051023)
+
+LIST "DRAM initialization code:"
+
+EW RWTCSRA0, 0xA507
+
+ED_AND LIFEC_SEC_SRC, 0xFFFF7FFF
+
+ED_AND SMSTPCR3,0xFFFF7FFF
+ED_AND SRCR3, 0xFFFF7FFF
+ED_AND SMSTPCR2,0xFFFBFFFF
+ED_AND SRCR2, 0xFFFBFFFF
+ED PLLECR, 0x00000000
+
+WAIT_MASK PLLECR, 0x00000F00, 0x00000000
+WAIT_MASK FRQCRB, 0x80000000, 0x00000000
+
+ED PLL0CR, 0x2D000000
+ED PLL1CR, 0x17100000
+ED FRQCRB, 0x96235880
+WAIT_MASK FRQCRB, 0x80000000, 0x00000000
+
+ED FLCKCR, 0x0000000B
+ED_AND SMSTPCR0, 0xFFFFFFFD
+
+ED_AND SRCR0, 0xFFFFFFFD
+ED 0xE6001628, 0x514
+ED 0xE6001648, 0x514
+ED 0xE6001658, 0x514
+ED 0xE6001678, 0x514
+
+ED DVFSCR4, 0x00092000
+ED DVFSCR5, 0x000000DC
+ED PLLECR, 0x00000000
+WAIT_MASK PLLECR, 0x00000F00, 0x00000000
+
+ED FRQCRA, 0x0012453C
+ED FRQCRB, 0x80431350
+WAIT_MASK FRQCRB, 0x80000000, 0x00000000
+ED FRQCRD, 0x00000B0B
+WAIT_MASK FRQCRD, 0x80000000, 0x00000000
+
+ED PCLKCR, 0x00000003
+ED VCLKCR1, 0x0000012F
+ED VCLKCR2, 0x00000119
+ED VCLKCR3, 0x00000119
+ED ZBCKCR, 0x00000002
+ED FLCKCR, 0x00000005
+ED SD0CKCR, 0x00000080
+ED SD1CKCR, 0x00000080
+ED SD2CKCR, 0x00000080
+ED FSIACKCR, 0x0000003F
+ED FSIBCKCR, 0x0000003F
+ED SUBCKCR, 0x00000080
+ED SPUACKCR, 0x0000000B
+ED SPUVCKCR, 0x0000000B
+ED MSUCKCR, 0x0000013F
+ED HSICKCR, 0x00000080
+ED MFCK1CR, 0x0000003F
+ED MFCK2CR, 0x0000003F
+ED DSITCKCR, 0x00000107
+ED DSI0PCKCR, 0x00000313
+ED DSI1PCKCR, 0x0000130D
+ED DSI0PHYCR, 0x2A800E0E
+ED PLL0CR, 0x1E000000
+ED PLL0CR, 0x2D000000
+ED PLL1CR, 0x17100000
+ED PLL2CR, 0x27000080
+ED PLL3CR, 0x1D000000
+ED PLL0STPCR, 0x00080000
+ED PLL1STPCR, 0x000120C0
+ED PLL2STPCR, 0x00012000
+ED PLL3STPCR, 0x00000030
+ED PLLECR, 0x0000000B
+WAIT_MASK PLLECR, 0x00000B00, 0x00000B00
+
+ED DVFSCR3, 0x000120F0
+ED MPMODE, 0x00000020
+ED VREFCR, 0x0000028A
+ED RMSTPCR0, 0xE4628087
+ED RMSTPCR1, 0xFFFFFFFF
+ED RMSTPCR2, 0x53FFFFFF
+ED RMSTPCR3, 0xFFFFFFFF
+ED RMSTPCR4, 0x00800D3D
+ED RMSTPCR5, 0xFFFFF3FF
+ED SMSTPCR2, 0x00000000
+ED SRCR2,  0x00040000
+ED_AND PLLECR, 0xFFFFFFF7
+WAIT_MASK PLLECR, 0x00000800, 0x00000000
+
+LIST "set SBSC operational"
+ED HPBCTRL6, 0x00000001
+WAIT_MASK HPBCTRL6, 0x00000001, 0x00000001
+
+LIST "set SBSC operating frequency"
+ED FRQCRD, 0x00001414
+WAIT_MASK FRQCRD, 0x80000000, 0x00000000
+ED PLL3CR, 0x1D000000
+ED_OR PLLECR, 0x00000008
+WAIT_MASK PLLECR, 0x00000800, 0x00000800
+
+LIST "enable DLL oscillation in DDRPHY"
+ED_OR DLLCNT0A, 0x00000002
+
+LIST "wait >= 100 ns"
+ED SDGENCNTA, 0x00000005
+WAIT_MASK SDGENCNTA, 0xFFFFFFFF, 0x00000000
+
+LIST "target LPDDR2 device settings"
+ED SDCR0A, 0xACC90159
+ED SDCR1A, 0x00010059
+ED SDWCRC0A, 0x50874114
+ED SDWCRC1A, 0x33199B37
+ED SDWCRC2A, 0x008F2313
+ED SDWCR00A, 0x31020707
+ED SDWCR01A, 0x0017040A
+ED SDWCR10A, 0x31020707
+ED SDWCR11A, 0x0017040A
+
+ED SDDRVCR0A, 0x055557ff
+
+ED SDWCR2A, 0x30000000
+
+LIST "drive CKE high"
+ED_OR SDPCRA, 0x00000080
+WAIT_MASK SDPCRA, 0x00000080, 0x00000080
+
+LIST "wait >= 200 us"
+ED SDGENCNTA, 0x00002710
+WAIT_MASK SDGENCNTA, 0xFFFFFFFF, 0x00000000
+
+LIST "issue reset command to LPDDR2 device"
+ED SDMRACR0A, 0x0000003F
+ED SDMRA1, 0x00000000
+
+LIST "wait >= 10 (or 1) us (docs inconsistent)"
+ED SDGENCNTA, 0x000001F4
+WAIT_MASK SDGENCNTA, 0xFFFFFFFF, 0x00000000
+
+LIST "MRW ZS initialization calibration command"
+ED SDMRACR0A, 0x0000FF0A
+ED SDMRA3, 0x00000000
+
+LIST "wait >= 1 us"
+ED SDGENCNTA, 0x00000032
+WAIT_MASK SDGENCNTA, 0xFFFFFFFF, 0x00000000
+
+LIST "specify operating mode in LPDDR2"
+ED SDMRACR0A, 0x00002201
+ED SDMRA1, 0x00000000
+ED SDMRACR0A, 0x00000402
+ED SDMRA1, 0x00000000
+ED SDMRACR0A, 0x00000203
+ED SDMRA1, 0x00000000
+
+LIST "initialize DDR interface"
+ED SDMRA2, 0x00000000
+
+LIST "temperature sensor control"
+ED SDMRTMPCRA, 0x88800004
+ED SDMRTMPMSKA,0x00000004
+
+LIST "auto-refreshing control"
+ED RTCORA, 0xA55A0032
+ED RTCORHA, 0xA55A000C
+ED RTCSRA, 0xA55A2048
+
+ED_OR SDCR0A, 0x00000800
+ED_OR SDCR1A, 0x00000400
+
+LIST "auto ZQ calibration control"
+ED ZQCCRA, 0xFFF20000
+
+ED_OR DLLCNT0B, 0x00000002
+ED SDGENCNTB, 0x00000005
+WAIT_MASK SDGENCNTB, 0xFFFFFFFF, 0x00000000
+
+ED SDCR0B, 0xACC90159
+ED SDCR1B, 0x00010059
+ED SDWCRC0B, 0x50874114
+ED SDWCRC1B, 0x33199B37
+ED SDWCRC2B, 0x008F2313
+ED SDWCR00B, 0x31020707
+ED SDWCR01B, 0x0017040A
+ED SDWCR10B, 0x31020707
+ED SDWCR11B, 0x0017040A
+ED SDDRVCR0B, 0x055557ff
+ED SDWCR2B, 0x30000000
+ED_OR SDPCRB, 0x00000080
+WAIT_MASK SDPCRB, 0x00000080, 0x00000080
+
+ED SDGENCNTB, 0x00002710
+WAIT_MASK SDGENCNTB, 0xFFFFFFFF, 0x00000000
+ED SDMRACR0B, 0x0000003F
+
+LIST "upstream u-boot writes to SDMRA1A for both SBSC 1 and 2, which does"
+LIST "not seem to make a lot of sense..."
+ED SDMRB1, 0x00000000
+
+ED SDGENCNTB, 0x000001F4
+WAIT_MASK SDGENCNTB, 0xFFFFFFFF, 0x00000000
+
+ED SDMRACR0B, 0x0000FF0A
+ED SDMRB3, 0x00000000
+ED SDGENCNTB, 0x00000032
+WAIT_MASK SDGENCNTB, 0xFFFFFFFF, 0x00000000
+
+ED SDMRACR0B, 0x00002201
+ED SDMRB1, 0x00000000
+ED SDMRACR0B, 0x00000402
+ED SDMRB1, 0x00000000
+ED SDMRACR0B, 0x00000203
+ED SDMRB1, 0x00000000
+ED SDMRB2, 0x00000000
+ED SDMRTMPCRB, 0x88800004
+ED SDMRTMPMSKB, 0x00000004
+ED RTCORB,  0xA55A0032
+ED RTCORHB, 0xA55A000C
+ED RTCSRB,  0xA55A2048
+ED_OR SDCR0B, 0x00000800
+ED_OR SDCR1B, 0x00000400
+ED ZQCCRB, 0xFFF20000
+ED_OR SDPDCR0B, 0x00030000
+ED DPHYCNT1B, 0xA5390000
+ED DPHYCNT0B, 0x00001200
+ED DPHYCNT1B, 0x07CE0000
+ED DPHYCNT0B, 0x00001247
+WAIT_MASK DPHYCNT2B, 0xFFFFFFFF, 0x07CE0000
+
+ED_AND SDPDCR0B, 0xFFFCFFFF
+
+ED FRQCRD, 0x00000B0B
+WAIT_MASK FRQCRD, 0x80000000, 0x00000000
+
+ED CPGXXCR4, 0xfffffffc
+
+LIST "Setup SCIF4 / workaround"
+EB PORT32CR, 0x12
+EB PORT33CR, 0x22
+EB PORT34CR, 0x12
+EB PORT35CR, 0x22
+
+EW 0xE6C80000, 0
+EB 0xE6C80004, 0x19
+EW 0xE6C80008, 0x0030
+EW 0xE6C80018, 0
+EW 0xE6C80030, 0x0014
+
+LIST "Magic to avoid hangs and corruption on DRAM writes."
+
+LIST "It has been observed that the system would most often hang while"
+LIST "decompressing the kernel, and if it didn't it would always write"
+LIST "a corrupt image to DRAM."
+LIST "This problem does not occur in u-boot, and the reason is that"
+LIST "u-boot performs an additional cache invalidation after setting up"
+LIST "the DRAM controller. Such an invalidation should not be necessary at"
+LIST "this point, and attempts at removing parts of the routine to arrive"
+LIST "at the minimal snippet of code necessary to avoid the DRAM stability"
+LIST "problem yielded the following:"
+
+MRC p15, 0, r0, c1, c0, 0
+MCR p15, 0, r0, c1, c0, 0

arch/arm/mach-shmobile/include/mach/zboot.h

···
 #ifdef CONFIG_MACH_MACKEREL
 #define MEMORY_START	0x40000000
 #include "mach/head-mackerel.txt"
+#elif defined(CONFIG_MACH_KZM9G) || defined(CONFIG_MACH_KZM9G_REFERENCE)
+#define MEMORY_START	0x43000000
+#include "mach/head-kzm9g.txt"
 #else
 #error "unsupported board."
 #endif

arch/arm/mach-shmobile/include/mach/zboot_macros.h

···
 2 :
 .endm
 
+/* loop until a given value has been read (with mask) */
+.macro WAIT_MASK, addr, data, cmp
+	LDR	r0, 2f
+	LDR	r1, 3f
+	LDR	r2, 4f
+1:
+	LDR	r3, [r0, #0]
+	AND	r3, r1, r3
+	CMP	r2, r3
+	BNE	1b
+	B	5f
+2:	.long	\addr
+3:	.long	\data
+4:	.long	\cmp
+5:
+.endm
+
+/* read 32-bit value from addr, "or" an immediate and write back */
+.macro ED_OR, addr, data
+	LDR r4, 1f
+	LDR r5, 2f
+	LDR r6, [r4]
+	ORR r5, r6, r5
+	STR r5, [r4]
+	B	3f
+1:	.long	\addr
+2:	.long	\data
+3:
+.endm
+
+/* read 32-bit value from addr, "and" an immediate and write back */
+.macro ED_AND, addr, data
+	LDR r4, 1f
+	LDR r5, 2f
+	LDR r6, [r4]
+	AND r5, r6, r5
+	STR r5, [r4]
+	B	3f
+1:	.long \addr
+2:	.long \data
+3:
+.endm
+
 #endif /* __ZBOOT_MACRO_H */