ARM: dts: colibri-imx7: Disable usb over-current

Disable usb over-current of the chipidea driver on all Carrier-Boards
used by Toradex. Do this as we don't want to use this functionality on
our Carrier Boards and to leave it open to someone who includes our
module-level device-trees.

This will prevent the warning "No over current polarity defined" from
being printed on boot.

Signed-off-by: Philippe Schenker <[e-mail]>
Signed-off-by: Shawn Guo <[e-mail]>

arch/arm/boot/dts/imx7-colibri-aster.dtsi

···
 
 /* Colibri USBC */
 &usbotg1 {
+	disable-over-current;
 	status = "okay";
 };
 

arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi

···
 
 /* Colibri USBC */
 &usbotg1 {
+	disable-over-current;
 	status = "okay";
 };
 

arch/arm/boot/dts/imx7-colibri-iris-v2.dtsi

···
 
 /* Colibri USBC */
 &usbotg1 {
+	disable-over-current;
 	status = "okay";
 };
 

arch/arm/boot/dts/imx7-colibri-iris.dtsi

···
 
 /* Colibri USBC */
 &usbotg1 {
+	disable-over-current;
 	status = "okay";
 };
 

arch/arm/boot/dts/imx7d-colibri-aster.dts

···
 
 /* Colibri USBH */
 &usbotg2 {
+	disable-over-current;
 	status = "okay";
 };

arch/arm/boot/dts/imx7d-colibri-emmc-aster.dts

···
 
 /* Colibri USBH */
 &usbotg2 {
+	disable-over-current;
 	status = "okay";
 };

arch/arm/boot/dts/imx7d-colibri-emmc-eval-v3.dts

···
 
 /* Colibri USBH */
 &usbotg2 {
+	disable-over-current;
 	status = "okay";
 };

arch/arm/boot/dts/imx7d-colibri-emmc-iris-v2.dts

···
 
 /* Colibri USBH */
 &usbotg2 {
+	disable-over-current;
 	status = "okay";
 };

arch/arm/boot/dts/imx7d-colibri-emmc-iris.dts

···
 
 /* Colibri USBH */
 &usbotg2 {
+	disable-over-current;
 	status = "okay";
 };

arch/arm/boot/dts/imx7d-colibri-emmc.dtsi

···
 
 /* Colibri USBH */
 &usbotg2 {
+	disable-over-current;
 	dr_mode = "host";
 	vbus-supply = <&reg_usbh_vbus>;
 };

arch/arm/boot/dts/imx7d-colibri-eval-v3.dts

···
 
 /* Colibri USBH */
 &usbotg2 {
+	disable-over-current;
 	status = "okay";
 };

arch/arm/boot/dts/imx7d-colibri-iris-v2.dts

···
 
 /* Colibri USBH */
 &usbotg2 {
+	disable-over-current;
 	status = "okay";
 };

arch/arm/boot/dts/imx7d-colibri-iris.dts

···
 
 /* Colibri USBH */
 &usbotg2 {
+	disable-over-current;
 	status = "okay";
 };