net: mdiobus: add clause 45 mdiobus accessors

There is a recurring pattern throughout some of the PHY code converting
a devad and regnum to our packed clause 45 representation. Rather than
having this scattered around the code, let's put a common translation
function in mdio.h, and provide some register accessors.

Convert the phylib core, phylink, bcm87xx and cortina to use these.

Signed-off-by: Russell King <[e-mail]>
Reviewed-by: Andrew Lunn <[e-mail]>
Reviewed-by: Florian Fainelli <[e-mail]>
Signed-off-by: David S. Miller <[e-mail]>

drivers/net/phy/bcm87xx.c

···
 		u16 mask	= be32_to_cpup(paddr++);
 		u16 val_bits	= be32_to_cpup(paddr++);
 		int val;
-		u32 regnum = MII_ADDR_C45 | (devid << 16) | reg;
+		u32 regnum = mdiobus_c45_addr(devid, reg);
 		val = 0;
 		if (mask) {
 			val = phy_read(phydev, regnum);

drivers/net/phy/cortina.c

···
 
 static int cortina_read_reg(struct phy_device *phydev, u16 regnum)
 {
-	return mdiobus_read(phydev->mdio.bus, phydev->mdio.addr,
-			    MII_ADDR_C45 | regnum);
+	return mdiobus_c45_read(phydev->mdio.bus, phydev->mdio.addr, 0, regnum);
 }
 
 static int cortina_read_status(struct phy_device *phydev)

drivers/net/phy/phy-core.c

···
 	if (phydev->drv && phydev->drv->read_mmd) {
 		val = phydev->drv->read_mmd(phydev, devad, regnum);
 	} else if (phydev->is_c45) {
-		u32 addr = MII_ADDR_C45 | (devad << 16) | (regnum & 0xffff);
-
-		val = __mdiobus_read(phydev->mdio.bus, phydev->mdio.addr, addr);
+		val = __mdiobus_c45_read(phydev->mdio.bus, phydev->mdio.addr,
+					 devad, regnum);
 	} else {
 		struct mii_bus *bus = phydev->mdio.bus;
 		int phy_addr = phydev->mdio.addr;
···
 	if (phydev->drv && phydev->drv->write_mmd) {
 		ret = phydev->drv->write_mmd(phydev, devad, regnum, val);
 	} else if (phydev->is_c45) {
-		u32 addr = MII_ADDR_C45 | (devad << 16) | (regnum & 0xffff);
-
-		ret = __mdiobus_write(phydev->mdio.bus, phydev->mdio.addr,
-				      addr, val);
+		ret = __mdiobus_c45_write(phydev->mdio.bus, phydev->mdio.addr,
+					  devad, regnum, val);
 	} else {
 		struct mii_bus *bus = phydev->mdio.bus;
 		int phy_addr = phydev->mdio.addr;

drivers/net/phy/phy.c

···
 		if (mdio_phy_id_is_c45(mii_data->phy_id)) {
 			prtad = mdio_phy_id_prtad(mii_data->phy_id);
 			devad = mdio_phy_id_devad(mii_data->phy_id);
-			devad = MII_ADDR_C45 | devad << 16 | mii_data->reg_num;
+			devad = mdiobus_c45_addr(devad, mii_data->reg_num);
 		} else {
 			prtad = mii_data->phy_id;
 			devad = mii_data->reg_num;
···
 		if (mdio_phy_id_is_c45(mii_data->phy_id)) {
 			prtad = mdio_phy_id_prtad(mii_data->phy_id);
 			devad = mdio_phy_id_devad(mii_data->phy_id);
-			devad = MII_ADDR_C45 | devad << 16 | mii_data->reg_num;
+			devad = mdiobus_c45_addr(devad, mii_data->reg_num);
 		} else {
 			prtad = mii_data->phy_id;
 			devad = mii_data->reg_num;

drivers/net/phy/phy_device.c

···
 static int get_phy_c45_devs_in_pkg(struct mii_bus *bus, int addr, int dev_addr,
 				   u32 *devices_in_package)
 {
-	int phy_reg, reg_addr;
+	int phy_reg;
 
-	reg_addr = MII_ADDR_C45 | dev_addr << 16 | MDIO_DEVS2;
-	phy_reg = mdiobus_read(bus, addr, reg_addr);
+	phy_reg = mdiobus_c45_read(bus, addr, dev_addr, MDIO_DEVS2);
 	if (phy_reg < 0)
 		return -EIO;
 	*devices_in_package = phy_reg << 16;
 
-	reg_addr = MII_ADDR_C45 | dev_addr << 16 | MDIO_DEVS1;
-	phy_reg = mdiobus_read(bus, addr, reg_addr);
+	phy_reg = mdiobus_c45_read(bus, addr, dev_addr, MDIO_DEVS1);
 	if (phy_reg < 0)
 		return -EIO;
 	*devices_in_package |= phy_reg;
···
  *
  */
 static int get_phy_c45_ids(struct mii_bus *bus, int addr, u32 *phy_id,
-			   struct phy_c45_device_ids *c45_ids) {
-	int phy_reg;
-	int i, reg_addr;
+			   struct phy_c45_device_ids *c45_ids)
+{
 	const int num_ids = ARRAY_SIZE(c45_ids->device_ids);
 	u32 *devs = &c45_ids->devices_in_package;
+	int i, phy_reg;
 
 	/* Find first non-zero Devices In package. Device zero is reserved
 	 * for 802.3 c45 complied PHYs, so don't probe it at first.
···
 		if (!(c45_ids->devices_in_package & (1 << i)))
 			continue;
 
-		reg_addr = MII_ADDR_C45 | i << 16 | MII_PHYSID1;
-		phy_reg = mdiobus_read(bus, addr, reg_addr);
+		phy_reg = mdiobus_c45_read(bus, addr, i, MII_PHYSID1);
 		if (phy_reg < 0)
 			return -EIO;
 		c45_ids->device_ids[i] = phy_reg << 16;
 
-		reg_addr = MII_ADDR_C45 | i << 16 | MII_PHYSID2;
-		phy_reg = mdiobus_read(bus, addr, reg_addr);
+		phy_reg = mdiobus_c45_read(bus, addr, i, MII_PHYSID2);
 		if (phy_reg < 0)
 			return -EIO;
 		c45_ids->device_ids[i] |= phy_reg;

drivers/net/phy/phylink.c

···
 	if (mdio_phy_id_is_c45(phy_id)) {
 		prtad = mdio_phy_id_prtad(phy_id);
 		devad = mdio_phy_id_devad(phy_id);
-		devad = MII_ADDR_C45 | devad << 16 | reg;
+		devad = mdiobus_c45_addr(devad, reg);
 	} else if (phydev->is_c45) {
 		switch (reg) {
 		case MII_BMCR:
···
 			return -EINVAL;
 		}
 		prtad = phy_id;
-		devad = MII_ADDR_C45 | devad << 16 | reg;
+		devad = mdiobus_c45_addr(devad, reg);
 	} else {
 		prtad = phy_id;
 		devad = reg;
···
 	if (mdio_phy_id_is_c45(phy_id)) {
 		prtad = mdio_phy_id_prtad(phy_id);
 		devad = mdio_phy_id_devad(phy_id);
-		devad = MII_ADDR_C45 | devad << 16 | reg;
+		devad = mdiobus_c45_addr(devad, reg);
 	} else if (phydev->is_c45) {
 		switch (reg) {
 		case MII_BMCR:
···
 			return -EINVAL;
 		}
 		prtad = phy_id;
-		devad = MII_ADDR_C45 | devad << 16 | reg;
+		devad = mdiobus_c45_addr(devad, reg);
 	} else {
 		prtad = phy_id;
 		devad = reg;
···
 }
 EXPORT_SYMBOL_GPL(phylink_mii_c22_pcs_an_restart);
 
-#define C45_ADDR(d,a)	(MII_ADDR_C45 | (d) << 16 | (a))
 void phylink_mii_c45_pcs_get_state(struct mdio_device *pcs,
 				   struct phylink_link_state *state)
 {
···
 	int addr = pcs->addr;
 	int stat;
 
-	stat = mdiobus_read(bus, addr, C45_ADDR(MDIO_MMD_PCS, MDIO_STAT1));
+	stat = mdiobus_c45_read(bus, addr, MDIO_MMD_PCS, MDIO_STAT1);
 	if (stat < 0) {
 		state->link = false;
 		return;

include/linux/mdio.h

···
 #include <uapi/linux/mdio.h>
 #include <linux/mod_devicetable.h>
 
+/* Or MII_ADDR_C45 into regnum for read/write on mii_bus to enable the 21 bit
+ * IEEE 802.3ae clause 45 addressing mode used by 10GIGE phy chips.
+ */
+#define MII_ADDR_C45		(1<<30)
+#define MII_DEVADDR_C45_SHIFT	16
+#define MII_REGADDR_C45_MASK	GENMASK(15, 0)
+
 struct gpio_desc;
 struct mii_bus;
 
···
 int mdiobus_write_nested(struct mii_bus *bus, int addr, u32 regnum, u16 val);
 int mdiobus_modify(struct mii_bus *bus, int addr, u32 regnum, u16 mask,
 		   u16 set);
+
+static inline u32 mdiobus_c45_addr(int devad, u16 regnum)
+{
+	return MII_ADDR_C45 | devad << MII_DEVADDR_C45_SHIFT | regnum;
+}
+
+static inline int __mdiobus_c45_read(struct mii_bus *bus, int prtad, int devad,
+				     u16 regnum)
+{
+	return __mdiobus_read(bus, prtad, mdiobus_c45_addr(devad, regnum));
+}
+
+static inline int __mdiobus_c45_write(struct mii_bus *bus, int prtad, int devad,
+				      u16 regnum, u16 val)
+{
+	return __mdiobus_write(bus, prtad, mdiobus_c45_addr(devad, regnum),
+			       val);
+}
+
+static inline int mdiobus_c45_read(struct mii_bus *bus, int prtad, int devad,
+				   u16 regnum)
+{
+	return mdiobus_read(bus, prtad, mdiobus_c45_addr(devad, regnum));
+}
 
 int mdiobus_register_device(struct mdio_device *mdiodev);
 int mdiobus_unregister_device(struct mdio_device *mdiodev);

include/linux/phy.h

···
 
 #define MII_BUS_ID_SIZE	61
 
-/* Or MII_ADDR_C45 into regnum for read/write on mii_bus to enable the 21 bit
-   IEEE 802.3ae clause 45 addressing mode used by 10GIGE phy chips. */
-#define MII_ADDR_C45 (1<<30)
-#define MII_DEVADDR_C45_SHIFT	16
-#define MII_REGADDR_C45_MASK	GENMASK(15, 0)
-
 struct device;
 struct phylink;
 struct sfp_bus;