ARM: dts: kswitch-d10: use open drain mode for coma-mode pins

The driver use the coma-mode pins as open-drain. Flag them in the device
tree accordingly. This avoids the following error:
[ 14.114180] gpio-2007 (coma-mode): enforced open drain please flag it properly in DT/ACPI DSDT/board file

Fixes: 46a9556d977e ("ARM: dts: kswitch-d10: enable networking")
Signed-off-by: Michael Walle <[e-mail]>
Signed-off-by: Claudiu Beznea <[e-mail]>
Link: https://lore.kernel.org/r/[e-mail]

arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt.dtsi

···
 
 	phy4: ethernet-phy@5 {
 		reg = <5>;
-		coma-mode-gpios = <&gpio 37 GPIO_ACTIVE_HIGH>;
+		coma-mode-gpios = <&gpio 37 GPIO_OPEN_DRAIN>;
 	};
 
 	phy5: ethernet-phy@6 {
 		reg = <6>;
-		coma-mode-gpios = <&gpio 37 GPIO_ACTIVE_HIGH>;
+		coma-mode-gpios = <&gpio 37 GPIO_OPEN_DRAIN>;
 	};
 
 	phy6: ethernet-phy@7 {
 		reg = <7>;
-		coma-mode-gpios = <&gpio 37 GPIO_ACTIVE_HIGH>;
+		coma-mode-gpios = <&gpio 37 GPIO_OPEN_DRAIN>;
 	};
 
 	phy7: ethernet-phy@8 {
 		reg = <8>;
-		coma-mode-gpios = <&gpio 37 GPIO_ACTIVE_HIGH>;
+		coma-mode-gpios = <&gpio 37 GPIO_OPEN_DRAIN>;
 	};
 };