clk: ti: dra7: disable the RNG and TIMER12 clkctrl clocks on HS devices

RNG and TIMER12 are reserved for secure side usage only on HS devices,
so disable their clkctrl clocks on HS SoCs also.

Signed-off-by: Tero Kristo <[e-mail]>
Tested-by: Andrew F. Davis <[e-mail]>
Signed-off-by: Stephen Boyd <[e-mail]>

arch/arm/mach-omap2/clock.c

···
 	if (cpu_is_omap343x())
 		features.flags |= TI_CLK_DPLL_HAS_FREQSEL;
 
+	if (omap_type() == OMAP2_DEVICE_TYPE_GP)
+		features.flags |= TI_CLK_DEVICE_TYPE_GP;
+
 	/* Idlest value for interface clocks.
 	 * 24xx uses 0 to indicate not ready, and 1 to indicate ready.
 	 * 34xx reverses this, just to keep us on our toes

drivers/clk/ti/clk-7xx-compat.c

···
 	{ DRA7_AES1_CLKCTRL, NULL, CLKF_HW_SUP, "l3_iclk_div", "l4sec_clkdm" },
 	{ DRA7_AES2_CLKCTRL, NULL, CLKF_HW_SUP, "l3_iclk_div", "l4sec_clkdm" },
 	{ DRA7_DES_CLKCTRL, NULL, CLKF_HW_SUP, "l3_iclk_div", "l4sec_clkdm" },
-	{ DRA7_RNG_CLKCTRL, NULL, CLKF_HW_SUP, "l3_iclk_div", "l4sec_clkdm" },
+	{ DRA7_RNG_CLKCTRL, NULL, CLKF_HW_SUP | CLKF_SOC_NONSEC, "l3_iclk_div", "l4sec_clkdm" },
 	{ DRA7_SHAM_CLKCTRL, NULL, CLKF_HW_SUP, "l3_iclk_div", "l4sec_clkdm" },
 	{ DRA7_UART7_CLKCTRL, dra7_uart7_bit_data, CLKF_SW_SUP, "l4per_cm:clk:01d0:24", "l4per2_clkdm" },
 	{ DRA7_UART8_CLKCTRL, dra7_uart8_bit_data, CLKF_SW_SUP, "l4per_cm:clk:01e0:24", "l4per2_clkdm" },
···
 	{ DRA7_WD_TIMER2_CLKCTRL, NULL, CLKF_SW_SUP, "sys_32k_ck" },
 	{ DRA7_GPIO1_CLKCTRL, dra7_gpio1_bit_data, CLKF_HW_SUP, "wkupaon_iclk_mux" },
 	{ DRA7_TIMER1_CLKCTRL, dra7_timer1_bit_data, CLKF_SW_SUP, "wkupaon_cm:clk:0020:24" },
-	{ DRA7_TIMER12_CLKCTRL, NULL, 0, "secure_32k_clk_src_ck" },
+	{ DRA7_TIMER12_CLKCTRL, NULL, CLKF_SOC_NONSEC, "secure_32k_clk_src_ck" },
 	{ DRA7_COUNTER_32K_CLKCTRL, NULL, 0, "wkupaon_iclk_mux" },
 	{ DRA7_UART10_CLKCTRL, dra7_uart10_bit_data, CLKF_SW_SUP, "wkupaon_cm:clk:0060:24" },
 	{ DRA7_DCAN1_CLKCTRL, dra7_dcan1_bit_data, CLKF_SW_SUP, "wkupaon_cm:clk:0068:24" },

drivers/clk/ti/clk-7xx.c

···
 	{ DRA7_L4SEC_AES1_CLKCTRL, NULL, CLKF_HW_SUP, "l3_iclk_div" },
 	{ DRA7_L4SEC_AES2_CLKCTRL, NULL, CLKF_HW_SUP, "l3_iclk_div" },
 	{ DRA7_L4SEC_DES_CLKCTRL, NULL, CLKF_HW_SUP, "l3_iclk_div" },
-	{ DRA7_L4SEC_RNG_CLKCTRL, NULL, CLKF_HW_SUP, "" },
+	{ DRA7_L4SEC_RNG_CLKCTRL, NULL, CLKF_HW_SUP | CLKF_SOC_NONSEC, "" },
 	{ DRA7_L4SEC_SHAM_CLKCTRL, NULL, CLKF_HW_SUP, "l3_iclk_div" },
 	{ 0 },
 };
···
 	{ DRA7_WKUPAON_WD_TIMER2_CLKCTRL, NULL, CLKF_SW_SUP, "sys_32k_ck" },
 	{ DRA7_WKUPAON_GPIO1_CLKCTRL, dra7_gpio1_bit_data, CLKF_HW_SUP, "wkupaon_iclk_mux" },
 	{ DRA7_WKUPAON_TIMER1_CLKCTRL, dra7_timer1_bit_data, CLKF_SW_SUP, "wkupaon-clkctrl:0020:24" },
-	{ DRA7_WKUPAON_TIMER12_CLKCTRL, NULL, 0, "secure_32k_clk_src_ck" },
+	{ DRA7_WKUPAON_TIMER12_CLKCTRL, NULL, CLKF_SOC_NONSEC, "secure_32k_clk_src_ck" },
 	{ DRA7_WKUPAON_COUNTER_32K_CLKCTRL, NULL, 0, "wkupaon_iclk_mux" },
 	{ DRA7_WKUPAON_UART10_CLKCTRL, dra7_uart10_bit_data, CLKF_SW_SUP, "wkupaon-clkctrl:0060:24" },
 	{ DRA7_WKUPAON_DCAN1_CLKCTRL, dra7_dcan1_bit_data, CLKF_SW_SUP, "wkupaon-clkctrl:0068:24" },

drivers/clk/ti/clkctrl.c

···
 		data = dm816_clkctrl_data;
 #endif
 
+	if (ti_clk_get_features()->flags & TI_CLK_DEVICE_TYPE_GP)
+		soc_mask |= CLKF_SOC_NONSEC;
+
 	while (data->addr) {
 		if (addr == data->addr)
 			break;

drivers/clk/ti/clock.h

···
 #define CLKF_HW_SUP			BIT(6)
 #define CLKF_NO_IDLEST			BIT(7)
 
-#define CLKF_SOC_MASK			GENMASK(10, 8)
+#define CLKF_SOC_MASK			GENMASK(11, 8)
 
-#define CLKF_SOC_DRA72			BIT(8)
-#define CLKF_SOC_DRA74			BIT(9)
-#define CLKF_SOC_DRA76			BIT(10)
+#define CLKF_SOC_NONSEC			BIT(8)
+#define CLKF_SOC_DRA72			BIT(9)
+#define CLKF_SOC_DRA74			BIT(10)
+#define CLKF_SOC_DRA76			BIT(11)
 
 #define CLK(dev, con, ck)		\
 	{				\

include/linux/clk/ti.h

···
 #define TI_CLK_DISABLE_CLKDM_CONTROL		BIT(2)
 #define TI_CLK_ERRATA_I810			BIT(3)
 #define TI_CLK_CLKCTRL_COMPAT			BIT(4)
+#define TI_CLK_DEVICE_TYPE_GP			BIT(5)
 
 void ti_clk_setup_features(struct ti_clk_features *features);
 const struct ti_clk_features *ti_clk_get_features(void);