leds: Remove uneeded leds-cm-x270 driver

The cm-x270 board uses leds-gpio so remove the now unneeded driver.

Acked-by: Mike Rapoport <[e-mail]>
Signed-off-by: Richard Purdie <[e-mail]>

drivers/leds/Kconfig

···
 	  outputs. To be useful the particular board must have LEDs
 	  and they must be connected to the GPIO lines.
 
-config LEDS_CM_X270
-	tristate "LED Support for the CM-X270 LEDs"
-	depends on LEDS_CLASS && MACH_ARMCORE
-	help
-	  This option enables support for the CM-X270 LEDs.
-
 config LEDS_CLEVO_MAIL
 	tristate "Mail LED on Clevo notebook (EXPERIMENTAL)"
 	depends on LEDS_CLASS && X86 && SERIO_I8042 && DMI && EXPERIMENTAL

drivers/leds/Makefile

···
 obj-$(CONFIG_LEDS_SUNFIRE)		+= leds-sunfire.o
 obj-$(CONFIG_LEDS_PCA9532)		+= leds-pca9532.o
 obj-$(CONFIG_LEDS_GPIO)			+= leds-gpio.o
-obj-$(CONFIG_LEDS_CM_X270)              += leds-cm-x270.o
 obj-$(CONFIG_LEDS_CLEVO_MAIL)		+= leds-clevo-mail.o
 obj-$(CONFIG_LEDS_HP6XX)		+= leds-hp6xx.o
 obj-$(CONFIG_LEDS_FSG)			+= leds-fsg.o

drivers/leds/leds-cm-x270.c

···
-/*
- * drivers/leds/leds-cm-x270.c
- *
- * Copyright 2007 CompuLab Ltd.
- * Author: Mike Rapoport <[e-mail]>
- *
- * Based on leds-corgi.c
- * Author: Richard Purdie <[e-mail]>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/leds.h>
-
-#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
-
-#define GPIO_RED_LED			(93)
-#define GPIO_GREEN_LED			(94)
-
-static void cmx270_red_set(struct led_classdev *led_cdev,
-			   enum led_brightness value)
-{
-	if (value)
-		GPCR(GPIO_RED_LED) = GPIO_bit(GPIO_RED_LED);
-	else
-		GPSR(GPIO_RED_LED) = GPIO_bit(GPIO_RED_LED);
-}
-
-static void cmx270_green_set(struct led_classdev *led_cdev,
-			     enum led_brightness value)
-{
-	if (value)
-		GPCR(GPIO_GREEN_LED) = GPIO_bit(GPIO_GREEN_LED);
-	else
-		GPSR(GPIO_GREEN_LED) = GPIO_bit(GPIO_GREEN_LED);
-}
-
-static struct led_classdev cmx270_red_led = {
-	.name			= "cm-x270:red",
-	.default_trigger	= "nand-disk",
-	.brightness_set		= cmx270_red_set,
-};
-
-static struct led_classdev cmx270_green_led = {
-	.name			= "cm-x270:green",
-	.default_trigger	= "heartbeat",
-	.brightness_set		= cmx270_green_set,
-};
-
-#ifdef CONFIG_PM
-static int cmx270led_suspend(struct platform_device *dev, pm_message_t state)
-{
-	led_classdev_suspend(&cmx270_red_led);
-	led_classdev_suspend(&cmx270_green_led);
-	return 0;
-}
-
-static int cmx270led_resume(struct platform_device *dev)
-{
-	led_classdev_resume(&cmx270_red_led);
-	led_classdev_resume(&cmx270_green_led);
-	return 0;
-}
-#endif
-
-static int cmx270led_probe(struct platform_device *pdev)
-{
-	int ret;
-
-	ret = led_classdev_register(&pdev->dev, &cmx270_red_led);
-	if (ret < 0)
-		return ret;
-
-	ret = led_classdev_register(&pdev->dev, &cmx270_green_led);
-	if (ret < 0)
-		led_classdev_unregister(&cmx270_red_led);
-
-	return ret;
-}
-
-static int cmx270led_remove(struct platform_device *pdev)
-{
-	led_classdev_unregister(&cmx270_red_led);
-	led_classdev_unregister(&cmx270_green_led);
-	return 0;
-}
-
-static struct platform_driver cmx270led_driver = {
-	.probe		= cmx270led_probe,
-	.remove		= cmx270led_remove,
-#ifdef CONFIG_PM
-	.suspend	= cmx270led_suspend,
-	.resume		= cmx270led_resume,
-#endif
-	.driver		= {
-		.name		= "cm-x270-led",
-		.owner		= THIS_MODULE,
-	},
-};
-
-static int __init cmx270led_init(void)
-{
-	return platform_driver_register(&cmx270led_driver);
-}
-
-static void __exit cmx270led_exit(void)
-{
-	platform_driver_unregister(&cmx270led_driver);
-}
-
-module_init(cmx270led_init);
-module_exit(cmx270led_exit);
-
-MODULE_AUTHOR("Mike Rapoport <[e-mail]>");
-MODULE_DESCRIPTION("CM-x270 LED driver");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:cm-x270-led");