Merge tag 'pci-v4.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI updates from Bjorn Helgaas:

- add framework for supporting PCIe devices in Endpoint mode (Kishon
Vijay Abraham I)

- use non-postable PCI config space mappings when possible (Lorenzo
Pieralisi)

- clean up and unify mmap of PCI BARs (David Woodhouse)

- export and unify Function Level Reset support (Christoph Hellwig)

- avoid FLR for Intel 82579 NICs (Sasha Neftin)

- add pci_request_irq() and pci_free_irq() helpers (Christoph Hellwig)

- short-circuit config access failures for disconnected devices (Keith
Busch)

- remove D3 sleep delay when possible (Adrian Hunter)

- freeze PME scan before suspending devices (Lukas Wunner)

- stop disabling MSI/MSI-X in pci_device_shutdown() (Prarit Bhargava)

- disable boot interrupt quirk for ASUS M2N-LR (Stefan Assmann)

- add arch-specific alignment control to improve device passthrough by
avoiding multiple BARs in a page (Yongji Xie)

- add sysfs sriov_drivers_autoprobe to control VF driver binding
(Bodong Wang)

- allow slots below PCI-to-PCIe "reverse bridges" (Bjorn Helgaas)

- fix crashes when unbinding host controllers that don't support
removal (Brian Norris)

- add driver for MicroSemi Switchtec management interface (Logan
Gunthorpe)

- add driver for Faraday Technology FTPCI100 host bridge (Linus
Walleij)

- add i.MX7D support (Andrey Smirnov)

- use generic MSI support for Aardvark (Thomas Petazzoni)

- make Rockchip driver modular (Brian Norris)

- advertise 128-byte Read Completion Boundary support for Rockchip
(Shawn Lin)

- advertise PCI_EXP_LNKSTA_SLC for Rockchip root port (Shawn Lin)

- convert atomic_t to refcount_t in HV driver (Elena Reshetova)

- add CPU IRQ affinity in HV driver (K. Y. Srinivasan)

- fix PCI bus removal in HV driver (Long Li)

- add support for ThunderX2 DMA alias topology (Jayachandran C)

- add ThunderX pass2.x 2nd node MCFG quirk (Tomasz Nowicki)

- add ITE 8893 bridge DMA alias quirk (Jarod Wilson)

- restrict Cavium ACS quirk only to CN81xx/CN83xx/CN88xx devices
(Manish Jaggi)

* tag 'pci-v4.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (146 commits)
PCI: Don't allow unbinding host controllers that aren't prepared
ARM: DRA7: clockdomain: Change the CLKTRCTRL of CM_PCIE_CLKSTCTRL to SW_WKUP
MAINTAINERS: Add PCI Endpoint maintainer
Documentation: PCI: Add userguide for PCI endpoint test function
tools: PCI: Add sample test script to invoke pcitest
tools: PCI: Add a userspace tool to test PCI endpoint
Documentation: misc-devices: Add Documentation for pci-endpoint-test driver
misc: Add host side PCI driver for PCI test function device
PCI: Add device IDs for DRA74x and DRA72x
dt-bindings: PCI: dra7xx: Add DT bindings to enable unaligned access
PCI: dwc: dra7xx: Workaround for errata id i870
dt-bindings: PCI: dra7xx: Add DT bindings for PCI dra7xx EP mode
PCI: dwc: dra7xx: Add EP mode support
PCI: dwc: dra7xx: Facilitate wrapper and MSI interrupts to be enabled independently
dt-bindings: PCI: Add DT bindings for PCI designware EP mode
PCI: dwc: designware: Add EP mode support
Documentation: PCI: Add binding documentation for pci-test endpoint function
ixgbe: Use pcie_flr() instead of duplicating it
IB/hfi1: Use pcie_flr() instead of duplicating it
PCI: imx6: Fix spelling mistake: "contol" -> "control"
...

Documentation/ABI/testing/sysfs-bus-pci

···
 Description:
 		This file contains the revision field of the PCI device.
 		The value comes from device config space. The file is read only.
+
+What:		/sys/bus/pci/devices/.../sriov_drivers_autoprobe
+Date:		April 2017
+Contact:	Bodong Wang<[e-mail]>
+Description:
+		This file is associated with the PF of a device that
+		supports SR-IOV.  It determines whether newly-enabled VFs
+		are immediately bound to a driver.  It initially contains
+		1, which means the kernel automatically binds VFs to a
+		compatible driver immediately after they are enabled.  If
+		an application writes 0 to the file before enabling VFs,
+		the kernel will not bind VFs to a driver.
+
+		A typical use case is to write 0 to this file, then enable
+		VFs, then assign the newly-created VFs to virtual machines.
+		Note that changing this file does not affect already-
+		enabled VFs.  In this scenario, the user must first disable
+		the VFs, write 0 to sriov_drivers_autoprobe, then re-enable
+		the VFs.
+
+		This is similar to /sys/bus/pci/drivers_autoprobe, but
+		affects only the VFs associated with a specific PF.

Documentation/ABI/testing/sysfs-class-switchtec

···
+switchtec - Microsemi Switchtec PCI Switch Management Endpoint
+
+For details on this subsystem look at Documentation/switchtec.txt.
+
+What: 		/sys/class/switchtec
+Date:		05-Jan-2017
+KernelVersion:	v4.11
+Contact:	Logan Gunthorpe <[e-mail]>
+Description:	The switchtec class subsystem folder.
+		Each registered switchtec driver is represented by a switchtecX
+		subfolder (X being an integer >= 0).
+
+
+What:		/sys/class/switchtec/switchtec[0-9]+/component_id
+Date:		05-Jan-2017
+KernelVersion:	v4.11
+Contact:	Logan Gunthorpe <[e-mail]>
+Description:	Component identifier as stored in the hardware (eg. PM8543)
+		(read only)
+Values: 	arbitrary string.
+
+
+What:		/sys/class/switchtec/switchtec[0-9]+/component_revision
+Date:		05-Jan-2017
+KernelVersion:	v4.11
+Contact:	Logan Gunthorpe <[e-mail]>
+Description:	Component revision stored in the hardware (read only)
+Values: 	integer.
+
+
+What:		/sys/class/switchtec/switchtec[0-9]+/component_vendor
+Date:		05-Jan-2017
+KernelVersion:	v4.11
+Contact:	Logan Gunthorpe <[e-mail]>
+Description:	Component vendor as stored in the hardware (eg. MICROSEM)
+		(read only)
+Values: 	arbitrary string.
+
+
+What:		/sys/class/switchtec/switchtec[0-9]+/device_version
+Date:		05-Jan-2017
+KernelVersion:	v4.11
+Contact:	Logan Gunthorpe <[e-mail]>
+Description:	Device version as stored in the hardware (read only)
+Values: 	integer.
+
+
+What:		/sys/class/switchtec/switchtec[0-9]+/fw_version
+Date:		05-Jan-2017
+KernelVersion:	v4.11
+Contact:	Logan Gunthorpe <[e-mail]>
+Description:	Currently running firmware version (read only)
+Values: 	integer (in hexadecimal).
+
+
+What:		/sys/class/switchtec/switchtec[0-9]+/partition
+Date:		05-Jan-2017
+KernelVersion:	v4.11
+Contact:	Logan Gunthorpe <[e-mail]>
+Description:	Partition number for this device in the switch (read only)
+Values: 	integer.
+
+
+What:		/sys/class/switchtec/switchtec[0-9]+/partition_count
+Date:		05-Jan-2017
+KernelVersion:	v4.11
+Contact:	Logan Gunthorpe <[e-mail]>
+Description:	Total number of partitions in the switch (read only)
+Values: 	integer.
+
+
+What:		/sys/class/switchtec/switchtec[0-9]+/product_id
+Date:		05-Jan-2017
+KernelVersion:	v4.11
+Contact:	Logan Gunthorpe <[e-mail]>
+Description:	Product identifier as stored in the hardware (eg. PSX 48XG3)
+		(read only)
+Values: 	arbitrary string.
+
+
+What:		/sys/class/switchtec/switchtec[0-9]+/product_revision
+Date:		05-Jan-2017
+KernelVersion:	v4.11
+Contact:	Logan Gunthorpe <[e-mail]>
+Description:	Product revision stored in the hardware (eg. RevB)
+		(read only)
+Values: 	arbitrary string.
+
+
+What:		/sys/class/switchtec/switchtec[0-9]+/product_vendor
+Date:		05-Jan-2017
+KernelVersion:	v4.11
+Contact:	Logan Gunthorpe <[e-mail]>
+Description:	Product vendor as stored in the hardware (eg. MICROSEM)
+		(read only)
+Values: 	arbitrary string.

Documentation/PCI/00-INDEX

···
 	- info on the PCI subsystem for device driver authors
 pcieaer-howto.txt
 	- the PCI Express Advanced Error Reporting Driver Guide HOWTO
+endpoint/pci-endpoint.txt
+	- guide to add endpoint controller driver and endpoint function driver.
+endpoint/pci-endpoint-cfs.txt
+	- guide to use configfs to configure the PCI endpoint function.
+endpoint/pci-test-function.txt
+	- specification of *PCI test* function device.
+endpoint/pci-test-howto.txt
+	- userguide for PCI endpoint test function.
+endpoint/function/binding/
+	- binding documentation for PCI endpoint function

Documentation/PCI/endpoint/function/binding/pci-test.txt

···
+PCI TEST ENDPOINT FUNCTION
+
+name: Should be "pci_epf_test" to bind to the pci_epf_test driver.
+
+Configurable Fields:
+vendorid	 : should be 0x104c
+deviceid	 : should be 0xb500 for DRA74x and 0xb501 for DRA72x
+revid		 : don't care
+progif_code	 : don't care
+subclass_code	 : don't care
+baseclass_code	 : should be 0xff
+cache_line_size	 : don't care
+subsys_vendor_id : don't care
+subsys_id	 : don't care
+interrupt_pin	 : Should be 1 - INTA, 2 - INTB, 3 - INTC, 4 -INTD
+msi_interrupts	 : Should be 1 to 32 depending on the number of MSI interrupts
+		   to test

Documentation/PCI/endpoint/pci-endpoint-cfs.txt

···
+                   CONFIGURING PCI ENDPOINT USING CONFIGFS
+                    Kishon Vijay Abraham I <[e-mail]>
+
+The PCI Endpoint Core exposes configfs entry (pci_ep) to configure the
+PCI endpoint function and to bind the endpoint function
+with the endpoint controller. (For introducing other mechanisms to
+configure the PCI Endpoint Function refer to [1]).
+
+*) Mounting configfs
+
+The PCI Endpoint Core layer creates pci_ep directory in the mounted configfs
+directory. configfs can be mounted using the following command.
+
+	mount -t configfs none /sys/kernel/config
+
+*) Directory Structure
+
+The pci_ep configfs has two directories at its root: controllers and
+functions. Every EPC device present in the system will have an entry in
+the *controllers* directory and and every EPF driver present in the system
+will have an entry in the *functions* directory.
+
+/sys/kernel/config/pci_ep/
+	.. controllers/
+	.. functions/
+
+*) Creating EPF Device
+
+Every registered EPF driver will be listed in controllers directory. The
+entries corresponding to EPF driver will be created by the EPF core.
+
+/sys/kernel/config/pci_ep/functions/
+	.. <EPF Driver1>/
+		... <EPF Device 11>/
+		... <EPF Device 21>/
+	.. <EPF Driver2>/
+		... <EPF Device 12>/
+		... <EPF Device 22>/
+
+In order to create a <EPF device> of the type probed by <EPF Driver>, the
+user has to create a directory inside <EPF DriverN>.
+
+Every <EPF device> directory consists of the following entries that can be
+used to configure the standard configuration header of the endpoint function.
+(These entries are created by the framework when any new <EPF Device> is
+created)
+
+	.. <EPF Driver1>/
+		... <EPF Device 11>/
+			... vendorid
+			... deviceid
+			... revid
+			... progif_code
+			... subclass_code
+			... baseclass_code
+			... cache_line_size
+			... subsys_vendor_id
+			... subsys_id
+			... interrupt_pin
+
+*) EPC Device
+
+Every registered EPC device will be listed in controllers directory. The
+entries corresponding to EPC device will be created by the EPC core.
+
+/sys/kernel/config/pci_ep/controllers/
+	.. <EPC Device1>/
+		... <Symlink EPF Device11>/
+		... <Symlink EPF Device12>/
+		... start
+	.. <EPC Device2>/
+		... <Symlink EPF Device21>/
+		... <Symlink EPF Device22>/
+		... start
+
+The <EPC Device> directory will have a list of symbolic links to
+<EPF Device>. These symbolic links should be created by the user to
+represent the functions present in the endpoint device.
+
+The <EPC Device> directory will also have a *start* field. Once
+"1" is written to this field, the endpoint device will be ready to
+establish the link with the host. This is usually done after
+all the EPF devices are created and linked with the EPC device.
+
+
+			 | controllers/
+				| <Directory: EPC name>/
+					| <Symbolic Link: Function>
+					| start
+			 | functions/
+				| <Directory: EPF driver>/
+					| <Directory: EPF device>/
+						| vendorid
+						| deviceid
+						| revid
+						| progif_code
+						| subclass_code
+						| baseclass_code
+						| cache_line_size
+						| subsys_vendor_id
+						| subsys_id
+						| interrupt_pin
+						| function
+
+[1] -> Documentation/PCI/endpoint/pci-endpoint.txt

Documentation/PCI/endpoint/pci-endpoint.txt

···
+			    PCI ENDPOINT FRAMEWORK
+		    Kishon Vijay Abraham I <[e-mail]>
+
+This document is a guide to use the PCI Endpoint Framework in order to create
+endpoint controller driver, endpoint function driver, and using configfs
+interface to bind the function driver to the controller driver.
+
+1. Introduction
+
+Linux has a comprehensive PCI subsystem to support PCI controllers that
+operates in Root Complex mode. The subsystem has capability to scan PCI bus,
+assign memory resources and IRQ resources, load PCI driver (based on
+vendor ID, device ID), support other services like hot-plug, power management,
+advanced error reporting and virtual channels.
+
+However the PCI controller IP integrated in some SoCs is capable of operating
+either in Root Complex mode or Endpoint mode. PCI Endpoint Framework will
+add endpoint mode support in Linux. This will help to run Linux in an
+EP system which can have a wide variety of use cases from testing or
+validation, co-processor accelerator, etc.
+
+2. PCI Endpoint Core
+
+The PCI Endpoint Core layer comprises 3 components: the Endpoint Controller
+library, the Endpoint Function library, and the configfs layer to bind the
+endpoint function with the endpoint controller.
+
+2.1 PCI Endpoint Controller(EPC) Library
+
+The EPC library provides APIs to be used by the controller that can operate
+in endpoint mode. It also provides APIs to be used by function driver/library
+in order to implement a particular endpoint function.
+
+2.1.1 APIs for the PCI controller Driver
+
+This section lists the APIs that the PCI Endpoint core provides to be used
+by the PCI controller driver.
+
+*) devm_pci_epc_create()/pci_epc_create()
+
+   The PCI controller driver should implement the following ops:
+	 * write_header: ops to populate configuration space header
+	 * set_bar: ops to configure the BAR
+	 * clear_bar: ops to reset the BAR
+	 * alloc_addr_space: ops to allocate in PCI controller address space
+	 * free_addr_space: ops to free the allocated address space
+	 * raise_irq: ops to raise a legacy or MSI interrupt
+	 * start: ops to start the PCI link
+	 * stop: ops to stop the PCI link
+
+   The PCI controller driver can then create a new EPC device by invoking
+   devm_pci_epc_create()/pci_epc_create().
+
+*) devm_pci_epc_destroy()/pci_epc_destroy()
+
+   The PCI controller driver can destroy the EPC device created by either
+   devm_pci_epc_create() or pci_epc_create() using devm_pci_epc_destroy() or
+   pci_epc_destroy().
+
+*) pci_epc_linkup()
+
+   In order to notify all the function devices that the EPC device to which
+   they are linked has established a link with the host, the PCI controller
+   driver should invoke pci_epc_linkup().
+
+*) pci_epc_mem_init()
+
+   Initialize the pci_epc_mem structure used for allocating EPC addr space.
+
+*) pci_epc_mem_exit()
+
+   Cleanup the pci_epc_mem structure allocated during pci_epc_mem_init().
+
+2.1.2 APIs for the PCI Endpoint Function Driver
+
+This section lists the APIs that the PCI Endpoint core provides to be used
+by the PCI endpoint function driver.
+
+*) pci_epc_write_header()
+
+   The PCI endpoint function driver should use pci_epc_write_header() to
+   write the standard configuration header to the endpoint controller.
+
+*) pci_epc_set_bar()
+
+   The PCI endpoint function driver should use pci_epc_set_bar() to configure
+   the Base Address Register in order for the host to assign PCI addr space.
+   Register space of the function driver is usually configured
+   using this API.
+
+*) pci_epc_clear_bar()
+
+   The PCI endpoint function driver should use pci_epc_clear_bar() to reset
+   the BAR.
+
+*) pci_epc_raise_irq()
+
+   The PCI endpoint function driver should use pci_epc_raise_irq() to raise
+   Legacy Interrupt or MSI Interrupt.
+
+*) pci_epc_mem_alloc_addr()
+
+   The PCI endpoint function driver should use pci_epc_mem_alloc_addr(), to
+   allocate memory address from EPC addr space which is required to access
+   RC's buffer
+
+*) pci_epc_mem_free_addr()
+
+   The PCI endpoint function driver should use pci_epc_mem_free_addr() to
+   free the memory space allocated using pci_epc_mem_alloc_addr().
+
+2.1.3 Other APIs
+
+There are other APIs provided by the EPC library. These are used for binding
+the EPF device with EPC device. pci-ep-cfs.c can be used as reference for
+using these APIs.
+
+*) pci_epc_get()
+
+   Get a reference to the PCI endpoint controller based on the device name of
+   the controller.
+
+*) pci_epc_put()
+
+   Release the reference to the PCI endpoint controller obtained using
+   pci_epc_get()
+
+*) pci_epc_add_epf()
+
+   Add a PCI endpoint function to a PCI endpoint controller. A PCIe device
+   can have up to 8 functions according to the specification.
+
+*) pci_epc_remove_epf()
+
+   Remove the PCI endpoint function from PCI endpoint controller.
+
+*) pci_epc_start()
+
+   The PCI endpoint function driver should invoke pci_epc_start() once it
+   has configured the endpoint function and wants to start the PCI link.
+
+*) pci_epc_stop()
+
+   The PCI endpoint function driver should invoke pci_epc_stop() to stop
+   the PCI LINK.
+
+2.2 PCI Endpoint Function(EPF) Library
+
+The EPF library provides APIs to be used by the function driver and the EPC
+library to provide endpoint mode functionality.
+
+2.2.1 APIs for the PCI Endpoint Function Driver
+
+This section lists the APIs that the PCI Endpoint core provides to be used
+by the PCI endpoint function driver.
+
+*) pci_epf_register_driver()
+
+   The PCI Endpoint Function driver should implement the following ops:
+	 * bind: ops to perform when a EPC device has been bound to EPF device
+	 * unbind: ops to perform when a binding has been lost between a EPC
+	   device and EPF device
+	 * linkup: ops to perform when the EPC device has established a
+	   connection with a host system
+
+  The PCI Function driver can then register the PCI EPF driver by using
+  pci_epf_register_driver().
+
+*) pci_epf_unregister_driver()
+
+  The PCI Function driver can unregister the PCI EPF driver by using
+  pci_epf_unregister_driver().
+
+*) pci_epf_alloc_space()
+
+  The PCI Function driver can allocate space for a particular BAR using
+  pci_epf_alloc_space().
+
+*) pci_epf_free_space()
+
+  The PCI Function driver can free the allocated space
+  (using pci_epf_alloc_space) by invoking pci_epf_free_space().
+
+2.2.2 APIs for the PCI Endpoint Controller Library
+This section lists the APIs that the PCI Endpoint core provides to be used
+by the PCI endpoint controller library.
+
+*) pci_epf_linkup()
+
+   The PCI endpoint controller library invokes pci_epf_linkup() when the
+   EPC device has established the connection to the host.
+
+2.2.2 Other APIs
+There are other APIs provided by the EPF library. These are used to notify
+the function driver when the EPF device is bound to the EPC device.
+pci-ep-cfs.c can be used as reference for using these APIs.
+
+*) pci_epf_create()
+
+   Create a new PCI EPF device by passing the name of the PCI EPF device.
+   This name will be used to bind the the EPF device to a EPF driver.
+
+*) pci_epf_destroy()
+
+   Destroy the created PCI EPF device.
+
+*) pci_epf_bind()
+
+   pci_epf_bind() should be invoked when the EPF device has been bound to
+   a EPC device.
+
+*) pci_epf_unbind()
+
+   pci_epf_unbind() should be invoked when the binding between EPC device
+   and EPF device is lost.

Documentation/PCI/endpoint/pci-test-function.txt

···
+				PCI TEST
+		    Kishon Vijay Abraham I <[e-mail]>
+
+Traditionally PCI RC has always been validated by using standard
+PCI cards like ethernet PCI cards or USB PCI cards or SATA PCI cards.
+However with the addition of EP-core in linux kernel, it is possible
+to configure a PCI controller that can operate in EP mode to work as
+a test device.
+
+The PCI endpoint test device is a virtual device (defined in software)
+used to test the endpoint functionality and serve as a sample driver
+for other PCI endpoint devices (to use the EP framework).
+
+The PCI endpoint test device has the following registers:
+
+	1) PCI_ENDPOINT_TEST_MAGIC
+	2) PCI_ENDPOINT_TEST_COMMAND
+	3) PCI_ENDPOINT_TEST_STATUS
+	4) PCI_ENDPOINT_TEST_SRC_ADDR
+	5) PCI_ENDPOINT_TEST_DST_ADDR
+	6) PCI_ENDPOINT_TEST_SIZE
+	7) PCI_ENDPOINT_TEST_CHECKSUM
+
+*) PCI_ENDPOINT_TEST_MAGIC
+
+This register will be used to test BAR0. A known pattern will be written
+and read back from MAGIC register to verify BAR0.
+
+*) PCI_ENDPOINT_TEST_COMMAND:
+
+This register will be used by the host driver to indicate the function
+that the endpoint device must perform.
+
+Bitfield Description:
+  Bit 0		: raise legacy IRQ
+  Bit 1		: raise MSI IRQ
+  Bit 2 - 7	: MSI interrupt number
+  Bit 8		: read command (read data from RC buffer)
+  Bit 9		: write command (write data to RC buffer)
+  Bit 10	: copy command (copy data from one RC buffer to another
+		  RC buffer)
+
+*) PCI_ENDPOINT_TEST_STATUS
+
+This register reflects the status of the PCI endpoint device.
+
+Bitfield Description:
+  Bit 0		: read success
+  Bit 1		: read fail
+  Bit 2		: write success
+  Bit 3		: write fail
+  Bit 4		: copy success
+  Bit 5		: copy fail
+  Bit 6		: IRQ raised
+  Bit 7		: source address is invalid
+  Bit 8		: destination address is invalid
+
+*) PCI_ENDPOINT_TEST_SRC_ADDR
+
+This register contains the source address (RC buffer address) for the
+COPY/READ command.
+
+*) PCI_ENDPOINT_TEST_DST_ADDR
+
+This register contains the destination address (RC buffer address) for
+the COPY/WRITE command.

Documentation/PCI/endpoint/pci-test-howto.txt

···
+			    PCI TEST USERGUIDE
+		    Kishon Vijay Abraham I <[e-mail]>
+
+This document is a guide to help users use pci-epf-test function driver
+and pci_endpoint_test host driver for testing PCI. The list of steps to
+be followed in the host side and EP side is given below.
+
+1. Endpoint Device
+
+1.1 Endpoint Controller Devices
+
+To find the list of endpoint controller devices in the system:
+
+	# ls /sys/class/pci_epc/
+	  51000000.pcie_ep
+
+If PCI_ENDPOINT_CONFIGFS is enabled
+	# ls /sys/kernel/config/pci_ep/controllers
+	  51000000.pcie_ep
+
+1.2 Endpoint Function Drivers
+
+To find the list of endpoint function drivers in the system:
+
+	# ls /sys/bus/pci-epf/drivers
+	  pci_epf_test
+
+If PCI_ENDPOINT_CONFIGFS is enabled
+	# ls /sys/kernel/config/pci_ep/functions
+	  pci_epf_test
+
+1.3 Creating pci-epf-test Device
+
+PCI endpoint function device can be created using the configfs. To create
+pci-epf-test device, the following commands can be used
+
+	# mount -t configfs none /sys/kernel/config
+	# cd /sys/kernel/config/pci_ep/
+	# mkdir functions/pci_epf_test/func1
+
+The "mkdir func1" above creates the pci-epf-test function device that will
+be probed by pci_epf_test driver.
+
+The PCI endpoint framework populates the directory with the following
+configurable fields.
+
+	# ls functions/pci_epf_test/func1
+	  baseclass_code	interrupt_pin	revid		subsys_vendor_id
+	  cache_line_size	msi_interrupts	subclass_code	vendorid
+	  deviceid          	progif_code	subsys_id
+
+The PCI endpoint function driver populates these entries with default values
+when the device is bound to the driver. The pci-epf-test driver populates
+vendorid with 0xffff and interrupt_pin with 0x0001
+
+	# cat functions/pci_epf_test/func1/vendorid
+	  0xffff
+	# cat functions/pci_epf_test/func1/interrupt_pin
+	  0x0001
+
+1.4 Configuring pci-epf-test Device
+
+The user can configure the pci-epf-test device using configfs entry. In order
+to change the vendorid and the number of MSI interrupts used by the function
+device, the following commands can be used.
+
+	# echo 0x104c > functions/pci_epf_test/func1/vendorid
+	# echo 0xb500 > functions/pci_epf_test/func1/deviceid
+	# echo 16 > functions/pci_epf_test/func1/msi_interrupts
+
+1.5 Binding pci-epf-test Device to EP Controller
+
+In order for the endpoint function device to be useful, it has to be bound to
+a PCI endpoint controller driver. Use the configfs to bind the function
+device to one of the controller driver present in the system.
+
+	# ln -s functions/pci_epf_test/func1 controllers/51000000.pcie_ep/
+
+Once the above step is completed, the PCI endpoint is ready to establish a link
+with the host.
+
+1.6 Start the Link
+
+In order for the endpoint device to establish a link with the host, the _start_
+field should be populated with '1'.
+
+	# echo 1 > controllers/51000000.pcie_ep/start
+
+2. RootComplex Device
+
+2.1 lspci Output
+
+Note that the devices listed here correspond to the value populated in 1.4 above
+
+	00:00.0 PCI bridge: Texas Instruments Device 8888 (rev 01)
+	01:00.0 Unassigned class [ff00]: Texas Instruments Device b500
+
+2.2 Using Endpoint Test function Device
+
+pcitest.sh added in tools/pci/ can be used to run all the default PCI endpoint
+tests. Before pcitest.sh can be used pcitest.c should be compiled using the
+following commands.
+
+	cd <kernel-dir>
+	make headers_install ARCH=arm
+	arm-linux-gnueabihf-gcc -Iusr/include tools/pci/pcitest.c -o pcitest
+	cp pcitest  <rootfs>/usr/sbin/
+	cp tools/pci/pcitest.sh <rootfs>
+
+2.2.1 pcitest.sh Output
+	# ./pcitest.sh
+	BAR tests
+
+	BAR0:           OKAY
+	BAR1:           OKAY
+	BAR2:           OKAY
+	BAR3:           OKAY
+	BAR4:           NOT OKAY
+	BAR5:           NOT OKAY
+
+	Interrupt tests
+
+	LEGACY IRQ:     NOT OKAY
+	MSI1:           OKAY
+	MSI2:           OKAY
+	MSI3:           OKAY
+	MSI4:           OKAY
+	MSI5:           OKAY
+	MSI6:           OKAY
+	MSI7:           OKAY
+	MSI8:           OKAY
+	MSI9:           OKAY
+	MSI10:          OKAY
+	MSI11:          OKAY
+	MSI12:          OKAY
+	MSI13:          OKAY
+	MSI14:          OKAY
+	MSI15:          OKAY
+	MSI16:          OKAY
+	MSI17:          NOT OKAY
+	MSI18:          NOT OKAY
+	MSI19:          NOT OKAY
+	MSI20:          NOT OKAY
+	MSI21:          NOT OKAY
+	MSI22:          NOT OKAY
+	MSI23:          NOT OKAY
+	MSI24:          NOT OKAY
+	MSI25:          NOT OKAY
+	MSI26:          NOT OKAY
+	MSI27:          NOT OKAY
+	MSI28:          NOT OKAY
+	MSI29:          NOT OKAY
+	MSI30:          NOT OKAY
+	MSI31:          NOT OKAY
+	MSI32:          NOT OKAY
+
+	Read Tests
+
+	READ (      1 bytes):           OKAY
+	READ (   1024 bytes):           OKAY
+	READ (   1025 bytes):           OKAY
+	READ (1024000 bytes):           OKAY
+	READ (1024001 bytes):           OKAY
+
+	Write Tests
+
+	WRITE (      1 bytes):          OKAY
+	WRITE (   1024 bytes):          OKAY
+	WRITE (   1025 bytes):          OKAY
+	WRITE (1024000 bytes):          OKAY
+	WRITE (1024001 bytes):          OKAY
+
+	Copy Tests
+
+	COPY (      1 bytes):           OKAY
+	COPY (   1024 bytes):           OKAY
+	COPY (   1025 bytes):           OKAY
+	COPY (1024000 bytes):           OKAY
+	COPY (1024001 bytes):           OKAY

Documentation/PCI/pci-iov-howto.txt

···
 	echo  0 > \
         /sys/bus/pci/devices/<DOMAIN:BUS:DEVICE.FUNCTION>/sriov_numvfs
 
+To enable auto probing VFs by a compatible driver on the host, run
+command below before enabling SR-IOV capabilities. This is the
+default behavior.
+	echo 1 > \
+        /sys/bus/pci/devices/<DOMAIN:BUS:DEVICE.FUNCTION>/sriov_drivers_autoprobe
+
+To disable auto probing VFs by a compatible driver on the host, run
+command below before enabling SR-IOV capabilities. Updating this
+entry will not affect VFs which are already probed.
+	echo  0 > \
+        /sys/bus/pci/devices/<DOMAIN:BUS:DEVICE.FUNCTION>/sriov_drivers_autoprobe
+
 3.2 Usage example
 
 Following piece of code illustrates the usage of the SR-IOV API.

Documentation/devicetree/bindings/pci/designware-pcie.txt

···
 - reg-names: Must be "config" for the PCIe configuration space.
     (The old way of getting the configuration address space from "ranges"
     is deprecated and should be avoided.)
+- num-lanes: number of lanes to use
+RC mode:
 - #address-cells: set to <3>
 - #size-cells: set to <2>
 - device_type: set to "pci"
 - ranges: ranges for the PCI memory and I/O regions
 - #interrupt-cells: set to <1>
-- interrupt-map-mask and interrupt-map: standard PCI properties
-	to define the mapping of the PCIe interface to interrupt
+- interrupt-map-mask and interrupt-map: standard PCI
+	properties to define the mapping of the PCIe interface to interrupt
 	numbers.
-- num-lanes: number of lanes to use
+EP mode:
+- num-ib-windows: number of inbound address translation
+        windows
+- num-ob-windows: number of outbound address translation
+        windows
 
 Optional properties:
-- num-viewport: number of view ports configured in hardware.  If a platform
-  does not specify it, the driver assumes 2.
 - num-lanes: number of lanes to use (this property should be specified unless
   the link is brought already up in BIOS)
 - reset-gpio: gpio pin number of power good signal
-- bus-range: PCI bus numbers covered (it is recommended for new devicetrees to
-  specify this property, to keep backwards compatibility a range of 0x00-0xff
-  is assumed if not present)
 - clocks: Must contain an entry for each entry in clock-names.
 	See ../clocks/clock-bindings.txt for details.
 - clock-names: Must include the following entries:
 	- "pcie"
 	- "pcie_bus"
+RC mode:
+- num-viewport: number of view ports configured in
+  hardware. If a platform does not specify it, the driver assumes 2.
+- bus-range: PCI bus numbers covered (it is recommended
+  for new devicetrees to specify this property, to keep backwards
+  compatibility a range of 0x00-0xff is assumed if not present)
+EP mode:
+- max-functions: maximum number of functions that can be
+  configured
 
 Example configuration:
 

Documentation/devicetree/bindings/pci/faraday,ftpci100.txt

···
+Faraday Technology FTPCI100 PCI Host Bridge
+
+This PCI bridge is found inside that Cortina Systems Gemini SoC platform and
+is a generic IP block from Faraday Technology. It exists in two variants:
+plain and dual PCI. The plain version embeds a cascading interrupt controller
+into the host bridge. The dual version routes the interrupts to the host
+chips interrupt controller.
+
+The host controller appear on the PCI bus with vendor ID 0x159b (Faraday
+Technology) and product ID 0x4321.
+
+Mandatory properties:
+
+- compatible: ranging from specific to generic, should be one of
+  "cortina,gemini-pci", "faraday,ftpci100"
+  "cortina,gemini-pci-dual", "faraday,ftpci100-dual"
+  "faraday,ftpci100"
+  "faraday,ftpci100-dual"
+- reg: memory base and size for the host bridge
+- #address-cells: set to <3>
+- #size-cells: set to <2>
+- #interrupt-cells: set to <1>
+- bus-range: set to <0x00 0xff>
+- device_type, set to "pci"
+- ranges: see pci.txt
+- interrupt-map-mask: see pci.txt
+- interrupt-map: see pci.txt
+- dma-ranges: three ranges for the inbound memory region. The ranges must
+  be aligned to a 1MB boundary, and may be 1MB, 2MB, 4MB, 8MB, 16MB, 32MB, 64MB,
+  128MB, 256MB, 512MB, 1GB or 2GB in size. The memory should be marked as
+  pre-fetchable.
+
+Mandatory subnodes:
+- For "faraday,ftpci100" a node representing the interrupt-controller inside the
+  host bridge is mandatory. It has the following mandatory properties:
+  - interrupt: see interrupt-controller/interrupts.txt
+  - interrupt-parent: see interrupt-controller/interrupts.txt
+  - interrupt-controller: see interrupt-controller/interrupts.txt
+  - #address-cells: set to <0>
+  - #interrupt-cells: set to <1>
+
+I/O space considerations:
+
+The plain variant has 128MiB of non-prefetchable memory space, whereas the
+"dual" variant has 64MiB. Take this into account when describing the ranges.
+
+Interrupt map considerations:
+
+The "dual" variant will get INT A, B, C, D from the system interrupt controller
+and should point to respective interrupt in that controller in its
+interrupt-map.
+
+The code which is the only documentation of how the Faraday PCI (the non-dual
+variant) interrupts assigns the default interrupt mapping/swizzling has
+typically been like this, doing the swizzling on the interrupt controller side
+rather than in the interconnect:
+
+interrupt-map-mask = <0xf800 0 0 7>;
+interrupt-map =
+	<0x4800 0 0 1 &pci_intc 0>, /* Slot 9 */
+	<0x4800 0 0 2 &pci_intc 1>,
+	<0x4800 0 0 3 &pci_intc 2>,
+	<0x4800 0 0 4 &pci_intc 3>,
+	<0x5000 0 0 1 &pci_intc 1>, /* Slot 10 */
+	<0x5000 0 0 2 &pci_intc 2>,
+	<0x5000 0 0 3 &pci_intc 3>,
+	<0x5000 0 0 4 &pci_intc 0>,
+	<0x5800 0 0 1 &pci_intc 2>, /* Slot 11 */
+	<0x5800 0 0 2 &pci_intc 3>,
+	<0x5800 0 0 3 &pci_intc 0>,
+	<0x5800 0 0 4 &pci_intc 1>,
+	<0x6000 0 0 1 &pci_intc 3>, /* Slot 12 */
+	<0x6000 0 0 2 &pci_intc 0>,
+	<0x6000 0 0 3 &pci_intc 1>,
+	<0x6000 0 0 4 &pci_intc 2>;
+
+Example:
+
+pci@50000000 {
+	compatible = "cortina,gemini-pci", "faraday,ftpci100";
+	reg = <0x50000000 0x100>;
+	interrupts = <8 IRQ_TYPE_LEVEL_HIGH>, /* PCI A */
+			<26 IRQ_TYPE_LEVEL_HIGH>, /* PCI B */
+			<27 IRQ_TYPE_LEVEL_HIGH>, /* PCI C */
+			<28 IRQ_TYPE_LEVEL_HIGH>; /* PCI D */
+	#address-cells = <3>;
+	#size-cells = <2>;
+	#interrupt-cells = <1>;
+
+	bus-range = <0x00 0xff>;
+	ranges = /* 1MiB I/O space 0x50000000-0x500fffff */
+		 <0x01000000 0 0          0x50000000 0 0x00100000>,
+		 /* 128MiB non-prefetchable memory 0x58000000-0x5fffffff */
+		 <0x02000000 0 0x58000000 0x58000000 0 0x08000000>;
+
+	/* DMA ranges */
+	dma-ranges =
+	/* 128MiB at 0x00000000-0x07ffffff */
+	<0x02000000 0 0x00000000 0x00000000 0 0x08000000>,
+	/* 64MiB at 0x00000000-0x03ffffff */
+	<0x02000000 0 0x00000000 0x00000000 0 0x04000000>,
+	/* 64MiB at 0x00000000-0x03ffffff */
+	<0x02000000 0 0x00000000 0x00000000 0 0x04000000>;
+
+	interrupt-map-mask = <0xf800 0 0 7>;
+	interrupt-map =
+		<0x4800 0 0 1 &pci_intc 0>, /* Slot 9 */
+		<0x4800 0 0 2 &pci_intc 1>,
+		<0x4800 0 0 3 &pci_intc 2>,
+		<0x4800 0 0 4 &pci_intc 3>,
+		<0x5000 0 0 1 &pci_intc 1>, /* Slot 10 */
+		<0x5000 0 0 2 &pci_intc 2>,
+		<0x5000 0 0 3 &pci_intc 3>,
+		<0x5000 0 0 4 &pci_intc 0>,
+		<0x5800 0 0 1 &pci_intc 2>, /* Slot 11 */
+		<0x5800 0 0 2 &pci_intc 3>,
+		<0x5800 0 0 3 &pci_intc 0>,
+		<0x5800 0 0 4 &pci_intc 1>,
+		<0x6000 0 0 1 &pci_intc 3>, /* Slot 12 */
+		<0x6000 0 0 2 &pci_intc 0>,
+		<0x6000 0 0 3 &pci_intc 0>,
+		<0x6000 0 0 4 &pci_intc 0>;
+	pci_intc: interrupt-controller {
+		interrupt-parent = <&intcon>;
+		interrupt-controller;
+		#address-cells = <0>;
+		#interrupt-cells = <1>;
+	};
+};

Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt

···
 and thus inherits all the common properties defined in designware-pcie.txt.
 
 Required properties:
-- compatible: "fsl,imx6q-pcie", "fsl,imx6sx-pcie", "fsl,imx6qp-pcie"
+- compatible:
+	- "fsl,imx6q-pcie"
+	- "fsl,imx6sx-pcie",
+	- "fsl,imx6qp-pcie"
+	- "fsl,imx7d-pcie"
 - reg: base address and length of the PCIe controller
 - interrupts: A list of interrupt outputs of the controller. Must contain an
   entry for each entry in the interrupt-names property.
···
 Additional required properties for imx6sx-pcie:
 - clock names: Must include the following additional entries:
 	- "pcie_inbound_axi"
+
+Additional required properties for imx7d-pcie:
+- power-domains: Must be set to a phandle pointing to PCIE_PHY power domain
+- resets: Must contain phandles to PCIe-related reset lines exposed by SRC
+  IP block
+- reset-names: Must contain the following entires:
+	       - "pciephy"
+	       - "apps"
 
 Example:
 

Documentation/devicetree/bindings/pci/ti-pci.txt

···
 TI PCI Controllers
 
 PCIe Designware Controller
- - compatible: Should be "ti,dra7-pcie""
- - reg : Two register ranges as listed in the reg-names property
- - reg-names : The first entry must be "ti-conf" for the TI specific registers
-	       The second entry must be "rc-dbics" for the designware pcie
-	       registers
-	       The third entry must be "config" for the PCIe configuration space
+ - compatible: Should be "ti,dra7-pcie" for RC
+	       Should be "ti,dra7-pcie-ep" for EP
  - phys : list of PHY specifiers (used by generic PHY framework)
  - phy-names : must be "pcie-phy0", "pcie-phy1", "pcie-phyN".. based on the
 	       number of PHYs as specified in *phys* property.
  - ti,hwmods : Name of the hwmod associated to the pcie, "pcie<X>",
 	       where <X> is the instance number of the pcie from the HW spec.
+ - num-lanes as specified in ../designware-pcie.txt
+
+HOST MODE
+=========
+ - reg : Two register ranges as listed in the reg-names property
+ - reg-names : The first entry must be "ti-conf" for the TI specific registers
+	       The second entry must be "rc-dbics" for the DesignWare PCIe
+	       registers
+	       The third entry must be "config" for the PCIe configuration space
  - interrupts : Two interrupt entries must be specified. The first one is for
 		main interrupt line and the second for MSI interrupt line.
  - #address-cells,
···
    #interrupt-cells,
    device_type,
    ranges,
-   num-lanes,
    interrupt-map-mask,
    interrupt-map : as specified in ../designware-pcie.txt
 
+DEVICE MODE
+===========
+ - reg : Four register ranges as listed in the reg-names property
+ - reg-names : "ti-conf" for the TI specific registers
+	       "ep_dbics" for the standard configuration registers as
+		they are locally accessed within the DIF CS space
+	       "ep_dbics2" for the standard configuration registers as
+		they are locally accessed within the DIF CS2 space
+	       "addr_space" used to map remote RC address space
+ - interrupts : one interrupt entries must be specified for main interrupt.
+ - num-ib-windows : number of inbound address translation windows
+ - num-ob-windows : number of outbound address translation windows
+ - ti,syscon-unaligned-access: phandle to the syscon DT node. The 1st argument
+			       should contain the register offset within syscon
+			       and the 2nd argument should contain the bit field
+			       for setting the bit to enable unaligned
+			       access.
+
 Optional Property:
  - gpios : Should be added if a gpio line is required to drive PERST# line
+
+NOTE: Two DT nodes may be added for each PCI controller; one for host
+mode and another for device mode. So in order for PCI to
+work in host mode, EP mode DT node should be disabled and in order to PCI to
+work in EP mode, host mode DT node should be disabled. Host mode and EP
+mode are mutually exclusive.
 
 Example:
 axi {

Documentation/driver-model/devres.txt

···
   devm_free_percpu()
 
 PCI
-  pcim_enable_device()	: after success, all PCI ops become managed
-  pcim_pin_device()	: keep PCI device enabled after release
+  devm_pci_remap_cfgspace()	: ioremap PCI configuration space
+  devm_pci_remap_cfg_resource()	: ioremap PCI configuration space resource
+  pcim_enable_device()		: after success, all PCI ops become managed
+  pcim_pin_device()		: keep PCI device enabled after release
 
 PHY
   devm_usb_get_phy()

Documentation/filesystems/sysfs-pci.txt

···
 --------------------------------------
 
 In order to support PCI resource mapping as described above, Linux platform
-code must define HAVE_PCI_MMAP and provide a pci_mmap_page_range function.
-Platforms are free to only support subsets of the mmap functionality, but
-useful return codes should be provided.
+code should ideally define ARCH_GENERIC_PCI_MMAP_RESOURCE and use the generic
+implementation of that functionality. To support the historical interface of
+mmap() through files in /proc/bus/pci, platforms may also set HAVE_PCI_MMAP.
+
+Alternatively, platforms which set HAVE_PCI_MMAP may provide their own
+implementation of pci_mmap_page_range() instead of defining
+ARCH_GENERIC_PCI_MMAP_RESOURCE.
+
+Platforms which support write-combining maps of PCI resources must define
+arch_can_pci_mmap_wc() which shall evaluate to non-zero at runtime when
+write-combining is permitted. Platforms which support maps of I/O resources
+define arch_can_pci_mmap_io() similarly.
 
 Legacy resources are protected by the HAVE_PCI_LEGACY define.  Platforms
 wishing to support legacy functionality should define it and provide

Documentation/ioctl/ioctl-number.txt

···
 'W'	00-1F	linux/watchdog.h	conflict!
 'W'	00-1F	linux/wanrouter.h	conflict!		(pre 3.9)
 'W'	00-3F	sound/asound.h		conflict!
+'W'	40-5F   drivers/pci/switch/switchtec.c
 'X'	all	fs/xfs/xfs_fs.h		conflict!
 		and fs/xfs/linux-2.6/xfs_ioctl32.h
 		and include/linux/falloc.h

Documentation/misc-devices/pci-endpoint-test.txt

···
+Driver for PCI Endpoint Test Function
+
+This driver should be used as a host side driver if the root complex is
+connected to a configurable PCI endpoint running *pci_epf_test* function
+driver configured according to [1].
+
+The "pci_endpoint_test" driver can be used to perform the following tests.
+
+The PCI driver for the test device performs the following tests
+	*) verifying addresses programmed in BAR
+	*) raise legacy IRQ
+	*) raise MSI IRQ
+	*) read data
+	*) write data
+	*) copy data
+
+This misc driver creates /dev/pci-endpoint-test.<num> for every
+*pci_epf_test* function connected to the root complex and "ioctls"
+should be used to perform the above tests.
+
+ioctl
+-----
+ PCITEST_BAR: Tests the BAR. The number of the BAR to be tested
+	      should be passed as argument.
+ PCITEST_LEGACY_IRQ: Tests legacy IRQ
+ PCITEST_MSI: Tests message signalled interrupts. The MSI number
+	      to be tested should be passed as argument.
+ PCITEST_WRITE: Perform write tests. The size of the buffer should be passed
+		as argument.
+ PCITEST_READ: Perform read tests. The size of the buffer should be passed
+	       as argument.
+ PCITEST_COPY: Perform read tests. The size of the buffer should be passed
+	       as argument.
+
+[1] -> Documentation/PCI/endpoint/function/binding/pci-test.txt

Documentation/switchtec.txt

···
+========================
+Linux Switchtec Support
+========================
+
+Microsemi's "Switchtec" line of PCI switch devices is already
+supported by the kernel with standard PCI switch drivers. However, the
+Switchtec device advertises a special management endpoint which
+enables some additional functionality. This includes:
+
+* Packet and Byte Counters
+* Firmware Upgrades
+* Event and Error logs
+* Querying port link status
+* Custom user firmware commands
+
+The switchtec kernel module implements this functionality.
+
+
+Interface
+=========
+
+The primary means of communicating with the Switchtec management firmware is
+through the Memory-mapped Remote Procedure Call (MRPC) interface.
+Commands are submitted to the interface with a 4-byte command
+identifier and up to 1KB of command specific data. The firmware will
+respond with a 4 bytes return code and up to 1KB of command specific
+data. The interface only processes a single command at a time.
+
+
+Userspace Interface
+===================
+
+The MRPC interface will be exposed to userspace through a simple char
+device: /dev/switchtec#, one for each management endpoint in the system.
+
+The char device has the following semantics:
+
+* A write must consist of at least 4 bytes and no more than 1028 bytes.
+  The first four bytes will be interpreted as the command to run and
+  the remainder will be used as the input data. A write will send the
+  command to the firmware to begin processing.
+
+* Each write must be followed by exactly one read. Any double write will
+  produce an error and any read that doesn't follow a write will
+  produce an error.
+
+* A read will block until the firmware completes the command and return
+  the four bytes of status plus up to 1024 bytes of output data. (The
+  length will be specified by the size parameter of the read call --
+  reading less than 4 bytes will produce an error.
+
+* The poll call will also be supported for userspace applications that
+  need to do other things while waiting for the command to complete.
+
+The following IOCTLs are also supported by the device:
+
+* SWITCHTEC_IOCTL_FLASH_INFO - Retrieve firmware length and number
+  of partitions in the device.
+
+* SWITCHTEC_IOCTL_FLASH_PART_INFO - Retrieve address and lengeth for
+  any specified partition in flash.
+
+* SWITCHTEC_IOCTL_EVENT_SUMMARY - Read a structure of bitmaps
+  indicating all uncleared events.
+
+* SWITCHTEC_IOCTL_EVENT_CTL - Get the current count, clear and set flags
+  for any event. This ioctl takes in a switchtec_ioctl_event_ctl struct
+  with the event_id, index and flags set (index being the partition or PFF
+  number for non-global events). It returns whether the event has
+  occurred, the number of times and any event specific data. The flags
+  can be used to clear the count or enable and disable actions to
+  happen when the event occurs.
+  By using the SWITCHTEC_IOCTL_EVENT_FLAG_EN_POLL flag,
+  you can set an event to trigger a poll command to return with
+  POLLPRI. In this way, userspace can wait for events to occur.
+
+* SWITCHTEC_IOCTL_PFF_TO_PORT and SWITCHTEC_IOCTL_PORT_TO_PFF convert
+  between PCI Function Framework number (used by the event system)
+  and Switchtec Logic Port ID and Partition number (which is more
+  user friendly).

MAINTAINERS

···
 F:	arch/x86/pci/
 F:	arch/x86/kernel/quirks.c
 
+PCI ENDPOINT SUBSYSTEM
+M:	Kishon Vijay Abraham I <[e-mail]>
+L:	[e-mail]
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/kishon/pci-endpoint.git
+S:	Supported
+F:	drivers/pci/endpoint/
+F:	drivers/misc/pci_endpoint_test.c
+F:	tools/pci/
+
 PCI DRIVER FOR ALTERA PCIE IP
 M:	Ley Foon Tan <[e-mail]>
 L:	[e-mail] (moderated for non-subscribers)
···
 S:	Maintained
 F:	Documentation/devicetree/bindings/pci/aardvark-pci.txt
 F:	drivers/pci/host/pci-aardvark.c
+
+PCI DRIVER FOR MICROSEMI SWITCHTEC
+M:	Kurt Schwemmer <[e-mail]>
+M:	Stephen Bates <[e-mail]>
+M:	Logan Gunthorpe <[e-mail]>
+L:	[e-mail]
+S:	Maintained
+F:	Documentation/switchtec.txt
+F:	Documentation/ABI/testing/sysfs-class-switchtec
+F:	drivers/pci/switch/switchtec*
+F:	include/uapi/linux/switchtec_ioctl.h
 
 PCI DRIVER FOR NVIDIA TEGRA
 M:	Thierry Reding <[e-mail]>

arch/arm/include/asm/io.h

···
 extern int pci_ioremap_io(unsigned int offset, phys_addr_t phys_addr);
 
 /*
+ * PCI configuration space mapping function.
+ *
+ * The PCI specification does not allow configuration write
+ * transactions to be posted. Add an arch specific
+ * pci_remap_cfgspace() definition that is implemented
+ * through strongly ordered memory mappings.
+ */
+#define pci_remap_cfgspace pci_remap_cfgspace
+void __iomem *pci_remap_cfgspace(resource_size_t res_cookie, size_t size);
+/*
  * Now, pick up the machine-defined IO definitions
  */
 #ifdef CONFIG_NEED_MACH_IO_H

arch/arm/include/asm/pci.h

···
 #define PCI_DMA_BUS_IS_PHYS     (1)
 
 #define HAVE_PCI_MMAP
-extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
-                               enum pci_mmap_state mmap_state, int write_combine);
+#define ARCH_GENERIC_PCI_MMAP_RESOURCE
 
 static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
 {

arch/arm/kernel/bios32.c

···
 	return start;
 }
 
-int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
-			enum pci_mmap_state mmap_state, int write_combine)
-{
-	if (mmap_state == pci_mmap_io)
-		return -EINVAL;
-
-	/*
-	 * Mark this as IO
-	 */
-	vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
-
-	if (remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff,
-			     vma->vm_end - vma->vm_start,
-			     vma->vm_page_prot))
-		return -EAGAIN;
-
-	return 0;
-}
-
 void __init pci_map_io_early(unsigned long pfn)
 {
 	struct map_desc pci_io_desc = {

arch/arm/mach-omap2/clockdomains7xx_data.c

···
 	.dep_bit	  = DRA7XX_PCIE_STATDEP_SHIFT,
 	.wkdep_srcs	  = pcie_wkup_sleep_deps,
 	.sleepdep_srcs	  = pcie_wkup_sleep_deps,
-	.flags		  = CLKDM_CAN_HWSUP_SWSUP,
+	.flags		  = CLKDM_CAN_SWSUP,
 };
 
 static struct clockdomain atl_7xx_clkdm = {

arch/arm/mm/ioremap.c

···
 				  __pgprot(get_mem_type(pci_ioremap_mem_type)->prot_pte));
 }
 EXPORT_SYMBOL_GPL(pci_ioremap_io);
+
+void __iomem *pci_remap_cfgspace(resource_size_t res_cookie, size_t size)
+{
+	return arch_ioremap_caller(res_cookie, size, MT_UNCACHED,
+				   __builtin_return_address(0));
+}
+EXPORT_SYMBOL_GPL(pci_remap_cfgspace);
 #endif
 
 /*

arch/arm/mm/nommu.c

···
 }
 EXPORT_SYMBOL(ioremap_wc);
 
+#ifdef CONFIG_PCI
+
+#include <asm/mach/map.h>
+
+void __iomem *pci_remap_cfgspace(resource_size_t res_cookie, size_t size)
+{
+	return arch_ioremap_caller(res_cookie, size, MT_UNCACHED,
+				   __builtin_return_address(0));
+}
+EXPORT_SYMBOL_GPL(pci_remap_cfgspace);
+#endif
+
 void *arch_memremap_wb(phys_addr_t phys_addr, size_t size)
 {
 	return (void *)phys_addr;

arch/arm64/include/asm/io.h

···
 #define iounmap				__iounmap
 
 /*
+ * PCI configuration space mapping function.
+ *
+ * The PCI specification disallows posted write configuration transactions.
+ * Add an arch specific pci_remap_cfgspace() definition that is implemented
+ * through nGnRnE device memory attribute as recommended by the ARM v8
+ * Architecture reference manual Issue A.k B2.8.2 "Device memory".
+ */
+#define pci_remap_cfgspace(addr, size) __ioremap((addr), (size), __pgprot(PROT_DEVICE_nGnRnE))
+
+/*
  * io{read,write}{16,32,64}be() macros
  */
 #define ioread16be(p)		({ __u16 __v = be16_to_cpu((__force __be16)__raw_readw(p)); __iormb(); __v; })

arch/arm64/include/asm/pci.h

···
  */
 #define PCI_DMA_BUS_IS_PHYS	(0)
 
+#define ARCH_GENERIC_PCI_MMAP_RESOURCE	1
+
 extern int isa_dma_bridge_buggy;
 
 #ifdef CONFIG_PCI

arch/cris/arch-v32/drivers/pci/bios.c

···
 	pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat);
 }
 
-int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
-			enum pci_mmap_state mmap_state, int write_combine)
-{
-	unsigned long prot;
-
-	/* Leave vm_pgoff as-is, the PCI space address is the physical
-	 * address on this platform.
-	 */
-	prot = pgprot_val(vma->vm_page_prot);
-	vma->vm_page_prot = __pgprot(prot);
-
-	/* Write-combine setting is ignored, it is changed via the mtrr
-	 * interfaces on this platform.
-	 */
-	if (remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff,
-			     vma->vm_end - vma->vm_start,
-			     vma->vm_page_prot))
-		return -EAGAIN;
-
-	return 0;
-}
-
 resource_size_t
 pcibios_align_resource(void *data, const struct resource *res,
 		       resource_size_t size, resource_size_t align)

arch/cris/include/asm/pci.h

···
 #define PCI_DMA_BUS_IS_PHYS	(1)
 
 #define HAVE_PCI_MMAP
-extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
-			       enum pci_mmap_state mmap_state, int write_combine);
-
+#define ARCH_GENERIC_PCI_MMAP_RESOURCE
 
 #endif /* __KERNEL__ */
 

arch/ia64/include/asm/pci.h

···
 #define PCI_DMA_BUS_IS_PHYS	(ia64_max_iommu_merge_mask == ~0UL)
 
 #define HAVE_PCI_MMAP
-extern int pci_mmap_page_range (struct pci_dev *dev, struct vm_area_struct *vma,
-				enum pci_mmap_state mmap_state, int write_combine);
+#define ARCH_GENERIC_PCI_MMAP_RESOURCE
+#define arch_can_pci_mmap_wc()	1
+
 #define HAVE_PCI_LEGACY
 extern int pci_mmap_legacy_page_range(struct pci_bus *bus,
 				      struct vm_area_struct *vma,

arch/ia64/pci/pci.c

···
 	return res->start;
 }
 
-int
-pci_mmap_page_range (struct pci_dev *dev, struct vm_area_struct *vma,
-		     enum pci_mmap_state mmap_state, int write_combine)
-{
-	unsigned long size = vma->vm_end - vma->vm_start;
-	pgprot_t prot;
-
-	/*
-	 * I/O space cannot be accessed via normal processor loads and
-	 * stores on this platform.
-	 */
-	if (mmap_state == pci_mmap_io)
-		/*
-		 * XXX we could relax this for I/O spaces for which ACPI
-		 * indicates that the space is 1-to-1 mapped.  But at the
-		 * moment, we don't support multiple PCI address spaces and
-		 * the legacy I/O space is not 1-to-1 mapped, so this is moot.
-		 */
-		return -EINVAL;
-
-	if (!valid_mmap_phys_addr_range(vma->vm_pgoff, size))
-		return -EINVAL;
-
-	prot = phys_mem_access_prot(NULL, vma->vm_pgoff, size,
-				    vma->vm_page_prot);
-
-	/*
-	 * If the user requested WC, the kernel uses UC or WC for this region,
-	 * and the chipset supports WC, we can use WC. Otherwise, we have to
-	 * use the same attribute the kernel uses.
-	 */
-	if (write_combine &&
-	    ((pgprot_val(prot) & _PAGE_MA_MASK) == _PAGE_MA_UC ||
-	     (pgprot_val(prot) & _PAGE_MA_MASK) == _PAGE_MA_WC) &&
-	    efi_range_is_wc(vma->vm_start, vma->vm_end - vma->vm_start))
-		vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot);
-	else
-		vma->vm_page_prot = prot;
-
-	if (remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff,
-			     vma->vm_end - vma->vm_start, vma->vm_page_prot))
-		return -EAGAIN;
-
-	return 0;
-}
-
 /**
  * ia64_pci_get_legacy_mem - generic legacy mem routine
  * @bus: bus to get legacy memory base address for

arch/microblaze/include/asm/pci.h

···
 extern int pci_proc_domain(struct pci_bus *bus);
 
 struct vm_area_struct;
-/* Map a range of PCI memory or I/O space for a device into user space */
-int pci_mmap_page_range(struct pci_dev *pdev, struct vm_area_struct *vma,
-			enum pci_mmap_state mmap_state, int write_combine);
 
 /* Tell drivers/pci/proc.c that we have pci_mmap_page_range() */
-#define HAVE_PCI_MMAP	1
+#define HAVE_PCI_MMAP		1
+#define arch_can_pci_mmap_io()	1
 
 extern int pci_legacy_read(struct pci_bus *bus, loff_t port, u32 *val,
 			   size_t count);

arch/microblaze/pci/pci-common.c

···
  *
  * Returns a negative error code on failure, zero on success.
  */
-int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
+int pci_mmap_page_range(struct pci_dev *dev, int bar, struct vm_area_struct *vma,
 			enum pci_mmap_state mmap_state, int write_combine)
 {
 	resource_size_t offset =

arch/mips/include/asm/pci.h

···
 extern void pcibios_set_master(struct pci_dev *dev);
 
 #define HAVE_PCI_MMAP
-
-extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
-	enum pci_mmap_state mmap_state, int write_combine);
-
+#define ARCH_GENERIC_PCI_MMAP_RESOURCE
 #define HAVE_ARCH_PCI_RESOURCE_TO_USER
 
 /*

arch/mips/pci/pci.c

···
 	*start = fixup_bigphys_addr(rsrc->start, size);
 	*end = rsrc->start + size;
 }
-
-int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
-			enum pci_mmap_state mmap_state, int write_combine)
-{
-	unsigned long prot;
-
-	/*
-	 * I/O space can be accessed via normal processor loads and stores on
-	 * this platform but for now we elect not to do this and portable
-	 * drivers should not do this anyway.
-	 */
-	if (mmap_state == pci_mmap_io)
-		return -EINVAL;
-
-	/*
-	 * Ignore write-combine; for now only return uncached mappings.
-	 */
-	prot = pgprot_val(vma->vm_page_prot);
-	prot = (prot & ~_CACHE_MASK) | _CACHE_UNCACHED;
-	vma->vm_page_prot = __pgprot(prot);
-
-	return remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff,
-		vma->vm_end - vma->vm_start, vma->vm_page_prot);
-}

arch/mn10300/include/asm/pci.h

···
 }
 
 #define HAVE_PCI_MMAP
-extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
-			       enum pci_mmap_state mmap_state,
-			       int write_combine);
+#define ARCH_GENERIC_PCI_MMAP_RESOURCE
 
 #endif /* __KERNEL__ */
 

arch/mn10300/unit-asb2305/pci-asb2305.c

···
 	pcibios_allocate_resources(0);
 	pcibios_allocate_resources(1);
 }
-
-int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
-			enum pci_mmap_state mmap_state, int write_combine)
-{
-	unsigned long prot;
-
-	/* Leave vm_pgoff as-is, the PCI space address is the physical
-	 * address on this platform.
-	 */
-	vma->vm_flags |= VM_LOCKED;
-
-	prot = pgprot_val(vma->vm_page_prot);
-	prot &= ~_PAGE_CACHE;
-	vma->vm_page_prot = __pgprot(prot);
-
-	/* Write-combine setting is ignored */
-	if (io_remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff,
-			       vma->vm_end - vma->vm_start,
-			       vma->vm_page_prot))
-		return -EAGAIN;
-
-	return 0;
-}

arch/parisc/include/asm/pci.h

···
 }
 
 #define HAVE_PCI_MMAP
-
-extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
-	enum pci_mmap_state mmap_state, int write_combine);
+#define ARCH_GENERIC_PCI_MMAP_RESOURCE
 
 #endif /* __ASM_PARISC_PCI_H */

arch/parisc/kernel/pci.c

···
 	return start;
 }
 
-
-int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
-			enum pci_mmap_state mmap_state, int write_combine)
-{
-	unsigned long prot;
-
-	/*
-	 * I/O space can be accessed via normal processor loads and stores on
-	 * this platform but for now we elect not to do this and portable
-	 * drivers should not do this anyway.
-	 */
-	if (mmap_state == pci_mmap_io)
-		return -EINVAL;
-
-	if (write_combine)
-		return -EINVAL;
-
-	/*
-	 * Ignore write-combine; for now only return uncached mappings.
-	 */
-	prot = pgprot_val(vma->vm_page_prot);
-	prot |= _PAGE_NO_CACHE;
-	vma->vm_page_prot = __pgprot(prot);
-
-	return remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff,
-		vma->vm_end - vma->vm_start, vma->vm_page_prot);
-}
-
 /*
  * A driver is enabling the device.  We make sure that all the appropriate
  * bits are set to allow the device to operate as the driver is expecting.

arch/powerpc/include/asm/machdep.h

···
 	/* Called after scan and before resource survey */
 	void (*pcibios_fixup_phb)(struct pci_controller *hose);
 
+	resource_size_t (*pcibios_default_alignment)(void);
+
 #ifdef CONFIG_PCI_IOV
 	void (*pcibios_fixup_sriov)(struct pci_dev *pdev);
 	resource_size_t (*pcibios_iov_resource_alignment)(struct pci_dev *, int resno);

arch/powerpc/include/asm/pci.h

···
 extern int pci_proc_domain(struct pci_bus *bus);
 
 struct vm_area_struct;
-/* Map a range of PCI memory or I/O space for a device into user space */
-int pci_mmap_page_range(struct pci_dev *pdev, struct vm_area_struct *vma,
-			enum pci_mmap_state mmap_state, int write_combine);
 
-/* Tell drivers/pci/proc.c that we have pci_mmap_page_range() */
-#define HAVE_PCI_MMAP	1
+/* Tell drivers/pci/proc.c that we have pci_mmap_page_range() and it does WC */
+#define HAVE_PCI_MMAP		1
+#define arch_can_pci_mmap_io()	1
+#define arch_can_pci_mmap_wc()	1
 
 extern int pci_legacy_read(struct pci_bus *bus, loff_t port, u32 *val,
 			   size_t count);

arch/powerpc/kernel/pci-common.c

···
 	pci_reset_secondary_bus(dev);
 }
 
+resource_size_t pcibios_default_alignment(void)
+{
+	if (ppc_md.pcibios_default_alignment)
+		return ppc_md.pcibios_default_alignment();
+
+	return 0;
+}
+
 #ifdef CONFIG_PCI_IOV
 resource_size_t pcibios_iov_resource_alignment(struct pci_dev *pdev, int resno)
 {
···
  *
  * Returns a negative error code on failure, zero on success.
  */
-int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
+int pci_mmap_page_range(struct pci_dev *dev, int bar,
+			struct vm_area_struct *vma,
 			enum pci_mmap_state mmap_state, int write_combine)
 {
 	resource_size_t offset =

arch/powerpc/platforms/powernv/pci-ioda.c

···
 	}
 }
 
+static resource_size_t pnv_pci_default_alignment(void)
+{
+	return PAGE_SIZE;
+}
+
 #ifdef CONFIG_PCI_IOV
 static resource_size_t pnv_pci_iov_resource_alignment(struct pci_dev *pdev,
 						      int resno)
···
 		phb->dma_dev_setup = pnv_pci_ioda_dma_dev_setup;
 		hose->controller_ops = pnv_pci_ioda_controller_ops;
 	}
+
+	ppc_md.pcibios_default_alignment = pnv_pci_default_alignment;
 
 #ifdef CONFIG_PCI_IOV
 	ppc_md.pcibios_fixup_sriov = pnv_pci_ioda_fixup_iov_resources;

arch/sh/drivers/pci/pci.c

···
 	}
 }
 
-int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
-			enum pci_mmap_state mmap_state, int write_combine)
-{
-	/*
-	 * I/O space can be accessed via normal processor loads and stores on
-	 * this platform but for now we elect not to do this and portable
-	 * drivers should not do this anyway.
-	 */
-	if (mmap_state == pci_mmap_io)
-		return -EINVAL;
-
-	/*
-	 * Ignore write-combine; for now only return uncached mappings.
-	 */
-	vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
-
-	return remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff,
-			       vma->vm_end - vma->vm_start,
-			       vma->vm_page_prot);
-}
-
 #ifndef CONFIG_GENERIC_IOMAP
 
 void __iomem *__pci_ioport_map(struct pci_dev *dev,

arch/sh/include/asm/pci.h

···
 struct pci_dev;
 
 #define HAVE_PCI_MMAP
-extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
-	enum pci_mmap_state mmap_state, int write_combine);
+#define ARCH_GENERIC_PCI_MMAP_RESOURCE
+
 extern void pcibios_set_master(struct pci_dev *dev);
 
 /* Dynamic DMA mapping stuff.

arch/sparc/include/asm/pci_64.h

···
 /* Platform support for /proc/bus/pci/X/Y mmap()s. */
 
 #define HAVE_PCI_MMAP
+#define arch_can_pci_mmap_io()	1
 #define HAVE_ARCH_PCI_GET_UNMAPPED_AREA
 #define get_pci_unmapped_area get_fb_unmapped_area
-
-int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
-			enum pci_mmap_state mmap_state,
-			int write_combine);
 
 static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
 {

arch/sparc/kernel/pci.c

···
  *
  * Returns a negative error code on failure, zero on success.
  */
-int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
-			enum pci_mmap_state mmap_state,
-			int write_combine)
+int pci_mmap_page_range(struct pci_dev *dev, int bar,
+			struct vm_area_struct *vma,
+			enum pci_mmap_state mmap_state, int write_combine)
 {
 	int ret;
 

arch/unicore32/include/asm/pci.h

···
 #include <mach/hardware.h> /* for PCIBIOS_MIN_* */
 
 #define HAVE_PCI_MMAP
-extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
-	enum pci_mmap_state mmap_state, int write_combine);
+#define ARCH_GENERIC_PCI_MMAP_RESOURCE
 
 #endif /* __KERNEL__ */
 #endif

arch/unicore32/kernel/pci.c

···
 	}
 	return 0;
 }
-
-int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
-			enum pci_mmap_state mmap_state, int write_combine)
-{
-	unsigned long phys;
-
-	if (mmap_state == pci_mmap_io)
-		return -EINVAL;
-
-	phys = vma->vm_pgoff;
-
-	/*
-	 * Mark this as IO
-	 */
-	vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
-
-	if (remap_pfn_range(vma, vma->vm_start, phys,
-			     vma->vm_end - vma->vm_start,
-			     vma->vm_page_prot))
-		return -EAGAIN;
-
-	return 0;
-}

arch/x86/include/asm/pci.h

···
 #include <linux/string.h>
 #include <linux/scatterlist.h>
 #include <asm/io.h>
+#include <asm/pat.h>
 #include <asm/x86_init.h>
 
 #ifdef __KERNEL__
···
 
 
 #define HAVE_PCI_MMAP
-extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
-			       enum pci_mmap_state mmap_state,
-			       int write_combine);
-
+#define arch_can_pci_mmap_wc()	pat_enabled()
+#define ARCH_GENERIC_PCI_MMAP_RESOURCE
 
 #ifdef CONFIG_PCI
 extern void early_quirks(void);

arch/x86/pci/i386.c

···
 	 */
 	ioapic_insert_resources();
 }
-
-static const struct vm_operations_struct pci_mmap_ops = {
-	.access = generic_access_phys,
-};
-
-int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
-			enum pci_mmap_state mmap_state, int write_combine)
-{
-	unsigned long prot;
-
-	/* I/O space cannot be accessed via normal processor loads and
-	 * stores on this platform.
-	 */
-	if (mmap_state == pci_mmap_io)
-		return -EINVAL;
-
-	prot = pgprot_val(vma->vm_page_prot);
-
-	/*
- 	 * Return error if pat is not enabled and write_combine is requested.
- 	 * Caller can followup with UC MINUS request and add a WC mtrr if there
- 	 * is a free mtrr slot.
- 	 */
-	if (!pat_enabled() && write_combine)
-		return -EINVAL;
-
-	if (pat_enabled() && write_combine)
-		prot |= cachemode2protval(_PAGE_CACHE_MODE_WC);
-	else if (pat_enabled() || boot_cpu_data.x86 > 3)
-		/*
-		 * ioremap() and ioremap_nocache() defaults to UC MINUS for now.
-		 * To avoid attribute conflicts, request UC MINUS here
-		 * as well.
-		 */
-		prot |= cachemode2protval(_PAGE_CACHE_MODE_UC_MINUS);
-
-	vma->vm_page_prot = __pgprot(prot);
-
-	if (io_remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff,
-			       vma->vm_end - vma->vm_start,
-			       vma->vm_page_prot))
-		return -EAGAIN;
-
-	vma->vm_ops = &pci_mmap_ops;
-
-	return 0;
-}

arch/xtensa/include/asm/pci.h

···
 
 #define PCI_DMA_BUS_IS_PHYS	(1)
 
-/* Map a range of PCI memory or I/O space for a device into user space */
-int pci_mmap_page_range(struct pci_dev *pdev, struct vm_area_struct *vma,
-			enum pci_mmap_state mmap_state, int write_combine);
-
 /* Tell drivers/pci/proc.c that we have pci_mmap_page_range() */
-#define HAVE_PCI_MMAP	1
+#define HAVE_PCI_MMAP		1
+#define arch_can_pci_mmap_io()	1
 
 #endif /* __KERNEL__ */
 

arch/xtensa/kernel/pci.c

···
 }
 
 /*
- * Set vm_page_prot of VMA, as appropriate for this architecture, for a pci
- * device mapping.
- */
-static __inline__ void
-__pci_mmap_set_pgprot(struct pci_dev *dev, struct vm_area_struct *vma,
-		      enum pci_mmap_state mmap_state, int write_combine)
-{
-	int prot = pgprot_val(vma->vm_page_prot);
-
-	/* Set to write-through */
-	prot = (prot & _PAGE_CA_MASK) | _PAGE_CA_WT;
-#if 0
-	if (!write_combine)
-		prot |= _PAGE_WRITETHRU;
-#endif
-	vma->vm_page_prot = __pgprot(prot);
-}
-
-/*
  * Perform the actual remap of the pages for a PCI device mapping, as
  * appropriate for this architecture.  The region in the process to map
  * is described by vm_start and vm_end members of VMA, the base physical
···
  *
  * Returns a negative error code on failure, zero on success.
  */
-int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
+int pci_mmap_page_range(struct pci_dev *dev, int bar,
+			struct vm_area_struct *vma,
 			enum pci_mmap_state mmap_state,
 			int write_combine)
 {
···
 	if (ret < 0)
 		return ret;
 
-	__pci_mmap_set_pgprot(dev, vma, mmap_state, write_combine);
+	vma->vm_page_prot = pgprot_device(vma->vm_page_prot);
 
 	ret = io_remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff,
 			         vma->vm_end - vma->vm_start,vma->vm_page_prot);

drivers/Makefile

···
 obj-$(CONFIG_PINCTRL)		+= pinctrl/
 obj-$(CONFIG_GPIOLIB)		+= gpio/
 obj-y				+= pwm/
+
 obj-$(CONFIG_PCI)		+= pci/
+obj-$(CONFIG_PCI_ENDPOINT)	+= pci/endpoint/
 # PCI dwc controller drivers
 obj-y				+= pci/dwc/
 

drivers/acpi/pci_mcfg.c

···
 
 #define QCOM_ECAM32(seg) \
 	{ "QCOM  ", "QDF2432 ", 1, seg, MCFG_BUS_ANY, &pci_32b_ops }
+
 	QCOM_ECAM32(0),
 	QCOM_ECAM32(1),
 	QCOM_ECAM32(2),
···
 	{ "HISI  ", table_id, 0, (seg) + 1, MCFG_BUS_ANY, ops }, \
 	{ "HISI  ", table_id, 0, (seg) + 2, MCFG_BUS_ANY, ops }, \
 	{ "HISI  ", table_id, 0, (seg) + 3, MCFG_BUS_ANY, ops }
+
 	HISI_QUAD_DOM("HIP05   ",  0, &hisi_pcie_ops),
 	HISI_QUAD_DOM("HIP06   ",  0, &hisi_pcie_ops),
 	HISI_QUAD_DOM("HIP07   ",  0, &hisi_pcie_ops),
···
 
 #define THUNDER_PEM_RES(addr, node) \
 	DEFINE_RES_MEM((addr) + ((u64) (node) << 44), 0x39 * SZ_16M)
+
 #define THUNDER_PEM_QUIRK(rev, node) \
 	{ "CAVIUM", "THUNDERX", rev, 4 + (10 * (node)), MCFG_BUS_ANY,	    \
 	  &thunder_pem_ecam_ops, THUNDER_PEM_RES(0x88001f000000UL, node) },  \
···
 	  &thunder_pem_ecam_ops, THUNDER_PEM_RES(0x894057000000UL, node) },  \
 	{ "CAVIUM", "THUNDERX", rev, 9 + (10 * (node)), MCFG_BUS_ANY,	    \
 	  &thunder_pem_ecam_ops, THUNDER_PEM_RES(0x89808f000000UL, node) }
-	/* SoC pass2.x */
-	THUNDER_PEM_QUIRK(1, 0),
-	THUNDER_PEM_QUIRK(1, 1),
 
 #define THUNDER_ECAM_QUIRK(rev, seg)					\
 	{ "CAVIUM", "THUNDERX", rev, seg, MCFG_BUS_ANY,			\
 	&pci_thunder_ecam_ops }
+
+	/* SoC pass2.x */
+	THUNDER_PEM_QUIRK(1, 0),
+	THUNDER_PEM_QUIRK(1, 1),
+	THUNDER_ECAM_QUIRK(1, 10),
+
 	/* SoC pass1.x */
 	THUNDER_PEM_QUIRK(2, 0),	/* off-chip devices */
 	THUNDER_PEM_QUIRK(2, 1),	/* off-chip devices */
···
 #define XGENE_V1_ECAM_MCFG(rev, seg) \
 	{"APM   ", "XGENE   ", rev, seg, MCFG_BUS_ANY, \
 		&xgene_v1_pcie_ecam_ops }
+
 #define XGENE_V2_ECAM_MCFG(rev, seg) \
 	{"APM   ", "XGENE   ", rev, seg, MCFG_BUS_ANY, \
 		&xgene_v2_pcie_ecam_ops }
+
 	/* X-Gene SoC with v1 PCIe controller */
 	XGENE_V1_ECAM_MCFG(1, 0),
 	XGENE_V1_ECAM_MCFG(1, 1),

drivers/infiniband/hw/hfi1/chip.c

···
 		dd_dev_info(dd, "Resetting CSRs with FLR\n");
 
 		/* do the FLR, the DC reset will remain */
-		hfi1_pcie_flr(dd);
+		pcie_flr(dd->pcidev);
 
 		/* restore command and BARs */
 		restore_pci_variables(dd);
 
 		if (is_ax(dd)) {
 			dd_dev_info(dd, "Resetting CSRs with FLR\n");
-			hfi1_pcie_flr(dd);
+			pcie_flr(dd->pcidev);
 			restore_pci_variables(dd);
 		}
 	} else {

drivers/infiniband/hw/hfi1/hfi.h

···
 void hfi1_pcie_cleanup(struct pci_dev *);
 int hfi1_pcie_ddinit(struct hfi1_devdata *, struct pci_dev *);
 void hfi1_pcie_ddcleanup(struct hfi1_devdata *);
-void hfi1_pcie_flr(struct hfi1_devdata *);
 int pcie_speeds(struct hfi1_devdata *);
 void request_msix(struct hfi1_devdata *, u32 *, struct hfi1_msix_entry *);
 void hfi1_enable_intx(struct pci_dev *);

drivers/infiniband/hw/hfi1/pcie.c

···
 		iounmap(dd->piobase);
 }
 
-/*
- * Do a Function Level Reset (FLR) on the device.
- * Based on static function drivers/pci/pci.c:pcie_flr().
- */
-void hfi1_pcie_flr(struct hfi1_devdata *dd)
-{
-	int i;
-	u16 status;
-
-	/* no need to check for the capability - we know the device has it */
-
-	/* wait for Transaction Pending bit to clear, at most a few ms */
-	for (i = 0; i < 4; i++) {
-		if (i)
-			msleep((1 << (i - 1)) * 100);
-
-		pcie_capability_read_word(dd->pcidev, PCI_EXP_DEVSTA, &status);
-		if (!(status & PCI_EXP_DEVSTA_TRPND))
-			goto clear;
-	}
-
-	dd_dev_err(dd, "Transaction Pending bit is not clearing, proceeding with reset anyway\n");
-
-clear:
-	pcie_capability_set_word(dd->pcidev, PCI_EXP_DEVCTL,
-				 PCI_EXP_DEVCTL_BCR_FLR);
-	/* PCIe spec requires the function to be back within 100ms */
-	msleep(100);
-}
-
 static void msix_setup(struct hfi1_devdata *dd, int pos, u32 *msixcnt,
 		       struct hfi1_msix_entry *hfi1_msix_entry)
 {

drivers/misc/Kconfig

···
 	  ioctl()s, the driver also provides a read/write interface to a BMC ram
 	  region where the host LPC read/write region can be buffered.
 
+config PCI_ENDPOINT_TEST
+	depends on PCI
+	tristate "PCI Endpoint Test driver"
+	---help---
+           Enable this configuration option to enable the host side test driver
+           for PCI Endpoint.
+
 source "drivers/misc/c2port/Kconfig"
 source "drivers/misc/eeprom/Kconfig"
 source "drivers/misc/cb710/Kconfig"

drivers/misc/Makefile

···
 obj-$(CONFIG_VEXPRESS_SYSCFG)	+= vexpress-syscfg.o
 obj-$(CONFIG_CXL_BASE)		+= cxl/
 obj-$(CONFIG_ASPEED_LPC_CTRL)	+= aspeed-lpc-ctrl.o
+obj-$(CONFIG_PCI_ENDPOINT_TEST)	+= pci_endpoint_test.o
 
 lkdtm-$(CONFIG_LKDTM)		+= lkdtm_core.o
 lkdtm-$(CONFIG_LKDTM)		+= lkdtm_bugs.o

drivers/misc/pci_endpoint_test.c

···
+/**
+ * Host side test driver to test endpoint functionality
+ *
+ * Copyright (C) 2017 Texas Instruments
+ * Author: Kishon Vijay Abraham I <[e-mail]>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 of
+ * the License as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/crc32.h>
+#include <linux/delay.h>
+#include <linux/fs.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/miscdevice.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/random.h>
+#include <linux/slab.h>
+#include <linux/pci.h>
+#include <linux/pci_ids.h>
+
+#include <linux/pci_regs.h>
+
+#include <uapi/linux/pcitest.h>
+
+#define DRV_MODULE_NAME			"pci-endpoint-test"
+
+#define PCI_ENDPOINT_TEST_MAGIC		0x0
+
+#define PCI_ENDPOINT_TEST_COMMAND	0x4
+#define COMMAND_RAISE_LEGACY_IRQ	BIT(0)
+#define COMMAND_RAISE_MSI_IRQ		BIT(1)
+#define MSI_NUMBER_SHIFT		2
+/* 6 bits for MSI number */
+#define COMMAND_READ                    BIT(8)
+#define COMMAND_WRITE                   BIT(9)
+#define COMMAND_COPY                    BIT(10)
+
+#define PCI_ENDPOINT_TEST_STATUS	0x8
+#define STATUS_READ_SUCCESS             BIT(0)
+#define STATUS_READ_FAIL                BIT(1)
+#define STATUS_WRITE_SUCCESS            BIT(2)
+#define STATUS_WRITE_FAIL               BIT(3)
+#define STATUS_COPY_SUCCESS             BIT(4)
+#define STATUS_COPY_FAIL                BIT(5)
+#define STATUS_IRQ_RAISED               BIT(6)
+#define STATUS_SRC_ADDR_INVALID         BIT(7)
+#define STATUS_DST_ADDR_INVALID         BIT(8)
+
+#define PCI_ENDPOINT_TEST_LOWER_SRC_ADDR	0xc
+#define PCI_ENDPOINT_TEST_UPPER_SRC_ADDR	0x10
+
+#define PCI_ENDPOINT_TEST_LOWER_DST_ADDR	0x14
+#define PCI_ENDPOINT_TEST_UPPER_DST_ADDR	0x18
+
+#define PCI_ENDPOINT_TEST_SIZE		0x1c
+#define PCI_ENDPOINT_TEST_CHECKSUM	0x20
+
+static DEFINE_IDA(pci_endpoint_test_ida);
+
+#define to_endpoint_test(priv) container_of((priv), struct pci_endpoint_test, \
+					    miscdev)
+enum pci_barno {
+	BAR_0,
+	BAR_1,
+	BAR_2,
+	BAR_3,
+	BAR_4,
+	BAR_5,
+};
+
+struct pci_endpoint_test {
+	struct pci_dev	*pdev;
+	void __iomem	*base;
+	void __iomem	*bar[6];
+	struct completion irq_raised;
+	int		last_irq;
+	/* mutex to protect the ioctls */
+	struct mutex	mutex;
+	struct miscdevice miscdev;
+};
+
+static int bar_size[] = { 4, 512, 1024, 16384, 131072, 1048576 };
+
+static inline u32 pci_endpoint_test_readl(struct pci_endpoint_test *test,
+					  u32 offset)
+{
+	return readl(test->base + offset);
+}
+
+static inline void pci_endpoint_test_writel(struct pci_endpoint_test *test,
+					    u32 offset, u32 value)
+{
+	writel(value, test->base + offset);
+}
+
+static inline u32 pci_endpoint_test_bar_readl(struct pci_endpoint_test *test,
+					      int bar, int offset)
+{
+	return readl(test->bar[bar] + offset);
+}
+
+static inline void pci_endpoint_test_bar_writel(struct pci_endpoint_test *test,
+						int bar, u32 offset, u32 value)
+{
+	writel(value, test->bar[bar] + offset);
+}
+
+static irqreturn_t pci_endpoint_test_irqhandler(int irq, void *dev_id)
+{
+	struct pci_endpoint_test *test = dev_id;
+	u32 reg;
+
+	reg = pci_endpoint_test_readl(test, PCI_ENDPOINT_TEST_STATUS);
+	if (reg & STATUS_IRQ_RAISED) {
+		test->last_irq = irq;
+		complete(&test->irq_raised);
+		reg &= ~STATUS_IRQ_RAISED;
+	}
+	pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_STATUS,
+				 reg);
+
+	return IRQ_HANDLED;
+}
+
+static bool pci_endpoint_test_bar(struct pci_endpoint_test *test,
+				  enum pci_barno barno)
+{
+	int j;
+	u32 val;
+	int size;
+
+	if (!test->bar[barno])
+		return false;
+
+	size = bar_size[barno];
+
+	for (j = 0; j < size; j += 4)
+		pci_endpoint_test_bar_writel(test, barno, j, 0xA0A0A0A0);
+
+	for (j = 0; j < size; j += 4) {
+		val = pci_endpoint_test_bar_readl(test, barno, j);
+		if (val != 0xA0A0A0A0)
+			return false;
+	}
+
+	return true;
+}
+
+static bool pci_endpoint_test_legacy_irq(struct pci_endpoint_test *test)
+{
+	u32 val;
+
+	pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_COMMAND,
+				 COMMAND_RAISE_LEGACY_IRQ);
+	val = wait_for_completion_timeout(&test->irq_raised,
+					  msecs_to_jiffies(1000));
+	if (!val)
+		return false;
+
+	return true;
+}
+
+static bool pci_endpoint_test_msi_irq(struct pci_endpoint_test *test,
+				      u8 msi_num)
+{
+	u32 val;
+	struct pci_dev *pdev = test->pdev;
+
+	pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_COMMAND,
+				 msi_num << MSI_NUMBER_SHIFT |
+				 COMMAND_RAISE_MSI_IRQ);
+	val = wait_for_completion_timeout(&test->irq_raised,
+					  msecs_to_jiffies(1000));
+	if (!val)
+		return false;
+
+	if (test->last_irq - pdev->irq == msi_num - 1)
+		return true;
+
+	return false;
+}
+
+static bool pci_endpoint_test_copy(struct pci_endpoint_test *test, size_t size)
+{
+	bool ret = false;
+	void *src_addr;
+	void *dst_addr;
+	dma_addr_t src_phys_addr;
+	dma_addr_t dst_phys_addr;
+	struct pci_dev *pdev = test->pdev;
+	struct device *dev = &pdev->dev;
+	u32 src_crc32;
+	u32 dst_crc32;
+
+	src_addr = dma_alloc_coherent(dev, size, &src_phys_addr, GFP_KERNEL);
+	if (!src_addr) {
+		dev_err(dev, "failed to allocate source buffer\n");
+		ret = false;
+		goto err;
+	}
+
+	pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_LOWER_SRC_ADDR,
+				 lower_32_bits(src_phys_addr));
+
+	pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_UPPER_SRC_ADDR,
+				 upper_32_bits(src_phys_addr));
+
+	get_random_bytes(src_addr, size);
+	src_crc32 = crc32_le(~0, src_addr, size);
+
+	dst_addr = dma_alloc_coherent(dev, size, &dst_phys_addr, GFP_KERNEL);
+	if (!dst_addr) {
+		dev_err(dev, "failed to allocate destination address\n");
+		ret = false;
+		goto err_src_addr;
+	}
+
+	pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_LOWER_DST_ADDR,
+				 lower_32_bits(dst_phys_addr));
+	pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_UPPER_DST_ADDR,
+				 upper_32_bits(dst_phys_addr));
+
+	pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_SIZE,
+				 size);
+
+	pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_COMMAND,
+				 1 << MSI_NUMBER_SHIFT | COMMAND_COPY);
+
+	wait_for_completion(&test->irq_raised);
+
+	dst_crc32 = crc32_le(~0, dst_addr, size);
+	if (dst_crc32 == src_crc32)
+		ret = true;
+
+	dma_free_coherent(dev, size, dst_addr, dst_phys_addr);
+
+err_src_addr:
+	dma_free_coherent(dev, size, src_addr, src_phys_addr);
+
+err:
+	return ret;
+}
+
+static bool pci_endpoint_test_write(struct pci_endpoint_test *test, size_t size)
+{
+	bool ret = false;
+	u32 reg;
+	void *addr;
+	dma_addr_t phys_addr;
+	struct pci_dev *pdev = test->pdev;
+	struct device *dev = &pdev->dev;
+	u32 crc32;
+
+	addr = dma_alloc_coherent(dev, size, &phys_addr, GFP_KERNEL);
+	if (!addr) {
+		dev_err(dev, "failed to allocate address\n");
+		ret = false;
+		goto err;
+	}
+
+	get_random_bytes(addr, size);
+
+	crc32 = crc32_le(~0, addr, size);
+	pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_CHECKSUM,
+				 crc32);
+
+	pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_LOWER_SRC_ADDR,
+				 lower_32_bits(phys_addr));
+	pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_UPPER_SRC_ADDR,
+				 upper_32_bits(phys_addr));
+
+	pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_SIZE, size);
+
+	pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_COMMAND,
+				 1 << MSI_NUMBER_SHIFT | COMMAND_READ);
+
+	wait_for_completion(&test->irq_raised);
+
+	reg = pci_endpoint_test_readl(test, PCI_ENDPOINT_TEST_STATUS);
+	if (reg & STATUS_READ_SUCCESS)
+		ret = true;
+
+	dma_free_coherent(dev, size, addr, phys_addr);
+
+err:
+	return ret;
+}
+
+static bool pci_endpoint_test_read(struct pci_endpoint_test *test, size_t size)
+{
+	bool ret = false;
+	void *addr;
+	dma_addr_t phys_addr;
+	struct pci_dev *pdev = test->pdev;
+	struct device *dev = &pdev->dev;
+	u32 crc32;
+
+	addr = dma_alloc_coherent(dev, size, &phys_addr, GFP_KERNEL);
+	if (!addr) {
+		dev_err(dev, "failed to allocate destination address\n");
+		ret = false;
+		goto err;
+	}
+
+	pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_LOWER_DST_ADDR,
+				 lower_32_bits(phys_addr));
+	pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_UPPER_DST_ADDR,
+				 upper_32_bits(phys_addr));
+
+	pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_SIZE, size);
+
+	pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_COMMAND,
+				 1 << MSI_NUMBER_SHIFT | COMMAND_WRITE);
+
+	wait_for_completion(&test->irq_raised);
+
+	crc32 = crc32_le(~0, addr, size);
+	if (crc32 == pci_endpoint_test_readl(test, PCI_ENDPOINT_TEST_CHECKSUM))
+		ret = true;
+
+	dma_free_coherent(dev, size, addr, phys_addr);
+err:
+	return ret;
+}
+
+static long pci_endpoint_test_ioctl(struct file *file, unsigned int cmd,
+				    unsigned long arg)
+{
+	int ret = -EINVAL;
+	enum pci_barno bar;
+	struct pci_endpoint_test *test = to_endpoint_test(file->private_data);
+
+	mutex_lock(&test->mutex);
+	switch (cmd) {
+	case PCITEST_BAR:
+		bar = arg;
+		if (bar < 0 || bar > 5)
+			goto ret;
+		ret = pci_endpoint_test_bar(test, bar);
+		break;
+	case PCITEST_LEGACY_IRQ:
+		ret = pci_endpoint_test_legacy_irq(test);
+		break;
+	case PCITEST_MSI:
+		ret = pci_endpoint_test_msi_irq(test, arg);
+		break;
+	case PCITEST_WRITE:
+		ret = pci_endpoint_test_write(test, arg);
+		break;
+	case PCITEST_READ:
+		ret = pci_endpoint_test_read(test, arg);
+		break;
+	case PCITEST_COPY:
+		ret = pci_endpoint_test_copy(test, arg);
+		break;
+	}
+
+ret:
+	mutex_unlock(&test->mutex);
+	return ret;
+}
+
+static const struct file_operations pci_endpoint_test_fops = {
+	.owner = THIS_MODULE,
+	.unlocked_ioctl = pci_endpoint_test_ioctl,
+};
+
+static int pci_endpoint_test_probe(struct pci_dev *pdev,
+				   const struct pci_device_id *ent)
+{
+	int i;
+	int err;
+	int irq;
+	int id;
+	char name[20];
+	enum pci_barno bar;
+	void __iomem *base;
+	struct device *dev = &pdev->dev;
+	struct pci_endpoint_test *test;
+	struct miscdevice *misc_device;
+
+	if (pci_is_bridge(pdev))
+		return -ENODEV;
+
+	test = devm_kzalloc(dev, sizeof(*test), GFP_KERNEL);
+	if (!test)
+		return -ENOMEM;
+
+	test->pdev = pdev;
+	init_completion(&test->irq_raised);
+	mutex_init(&test->mutex);
+
+	err = pci_enable_device(pdev);
+	if (err) {
+		dev_err(dev, "Cannot enable PCI device\n");
+		return err;
+	}
+
+	err = pci_request_regions(pdev, DRV_MODULE_NAME);
+	if (err) {
+		dev_err(dev, "Cannot obtain PCI resources\n");
+		goto err_disable_pdev;
+	}
+
+	pci_set_master(pdev);
+
+	irq = pci_alloc_irq_vectors(pdev, 1, 32, PCI_IRQ_MSI);
+	if (irq < 0)
+		dev_err(dev, "failed to get MSI interrupts\n");
+
+	err = devm_request_irq(dev, pdev->irq, pci_endpoint_test_irqhandler,
+			       IRQF_SHARED, DRV_MODULE_NAME, test);
+	if (err) {
+		dev_err(dev, "failed to request IRQ %d\n", pdev->irq);
+		goto err_disable_msi;
+	}
+
+	for (i = 1; i < irq; i++) {
+		err = devm_request_irq(dev, pdev->irq + i,
+				       pci_endpoint_test_irqhandler,
+				       IRQF_SHARED, DRV_MODULE_NAME, test);
+		if (err)
+			dev_err(dev, "failed to request IRQ %d for MSI %d\n",
+				pdev->irq + i, i + 1);
+	}
+
+	for (bar = BAR_0; bar <= BAR_5; bar++) {
+		base = pci_ioremap_bar(pdev, bar);
+		if (!base) {
+			dev_err(dev, "failed to read BAR%d\n", bar);
+			WARN_ON(bar == BAR_0);
+		}
+		test->bar[bar] = base;
+	}
+
+	test->base = test->bar[0];
+	if (!test->base) {
+		dev_err(dev, "Cannot perform PCI test without BAR0\n");
+		goto err_iounmap;
+	}
+
+	pci_set_drvdata(pdev, test);
+
+	id = ida_simple_get(&pci_endpoint_test_ida, 0, 0, GFP_KERNEL);
+	if (id < 0) {
+		dev_err(dev, "unable to get id\n");
+		goto err_iounmap;
+	}
+
+	snprintf(name, sizeof(name), DRV_MODULE_NAME ".%d", id);
+	misc_device = &test->miscdev;
+	misc_device->minor = MISC_DYNAMIC_MINOR;
+	misc_device->name = name;
+	misc_device->fops = &pci_endpoint_test_fops,
+
+	err = misc_register(misc_device);
+	if (err) {
+		dev_err(dev, "failed to register device\n");
+		goto err_ida_remove;
+	}
+
+	return 0;
+
+err_ida_remove:
+	ida_simple_remove(&pci_endpoint_test_ida, id);
+
+err_iounmap:
+	for (bar = BAR_0; bar <= BAR_5; bar++) {
+		if (test->bar[bar])
+			pci_iounmap(pdev, test->bar[bar]);
+	}
+
+err_disable_msi:
+	pci_disable_msi(pdev);
+	pci_release_regions(pdev);
+
+err_disable_pdev:
+	pci_disable_device(pdev);
+
+	return err;
+}
+
+static void pci_endpoint_test_remove(struct pci_dev *pdev)
+{
+	int id;
+	enum pci_barno bar;
+	struct pci_endpoint_test *test = pci_get_drvdata(pdev);
+	struct miscdevice *misc_device = &test->miscdev;
+
+	if (sscanf(misc_device->name, DRV_MODULE_NAME ".%d", &id) != 1)
+		return;
+
+	misc_deregister(&test->miscdev);
+	ida_simple_remove(&pci_endpoint_test_ida, id);
+	for (bar = BAR_0; bar <= BAR_5; bar++) {
+		if (test->bar[bar])
+			pci_iounmap(pdev, test->bar[bar]);
+	}
+	pci_disable_msi(pdev);
+	pci_release_regions(pdev);
+	pci_disable_device(pdev);
+}
+
+static const struct pci_device_id pci_endpoint_test_tbl[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_DRA74x) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_DRA72x) },
+	{ }
+};
+MODULE_DEVICE_TABLE(pci, pci_endpoint_test_tbl);
+
+static struct pci_driver pci_endpoint_test_driver = {
+	.name		= DRV_MODULE_NAME,
+	.id_table	= pci_endpoint_test_tbl,
+	.probe		= pci_endpoint_test_probe,
+	.remove		= pci_endpoint_test_remove,
+};
+module_pci_driver(pci_endpoint_test_driver);
+
+MODULE_DESCRIPTION("PCI ENDPOINT TEST HOST DRIVER");
+MODULE_AUTHOR("Kishon Vijay Abraham I <[e-mail]>");
+MODULE_LICENSE("GPL v2");

drivers/net/ethernet/intel/ixgbe/ixgbe_main.c

···
 }
 
 #ifdef CONFIG_PCI_IOV
-static inline void ixgbe_issue_vf_flr(struct ixgbe_adapter *adapter,
-				      struct pci_dev *vfdev)
-{
-	if (!pci_wait_for_pending_transaction(vfdev))
-		e_dev_warn("Issuing VFLR with pending transactions\n");
-
-	e_dev_err("Issuing VFLR for VF %s\n", pci_name(vfdev));
-	pcie_capability_set_word(vfdev, PCI_EXP_DEVCTL, PCI_EXP_DEVCTL_BCR_FLR);
-
-	msleep(100);
-}
-
 static void ixgbe_check_for_bad_vf(struct ixgbe_adapter *adapter)
 {
 	struct ixgbe_hw *hw = &adapter->hw;
···
 		pci_read_config_word(vfdev, PCI_STATUS, &status_reg);
 		if (status_reg != IXGBE_FAILED_READ_CFG_WORD &&
 		    status_reg & PCI_STATUS_REC_MASTER_ABORT)
-			ixgbe_issue_vf_flr(adapter, vfdev);
+			pcie_flr(vfdev);
 	}
 }
 
···
 		 * VFLR.  Just clean up the AER in that case.
 		 */
 		if (vfdev) {
-			ixgbe_issue_vf_flr(adapter, vfdev);
+			pcie_flr(vfdev);
 			/* Free device reference count */
 			pci_dev_put(vfdev);
 		}

drivers/nvme/host/pci.c

···
 struct nvme_queue {
 	struct device *q_dmadev;
 	struct nvme_dev *dev;
-	char irqname[24];	/* nvme4294967295-65535\0 */
 	spinlock_t q_lock;
 	struct nvme_command *sq_cmds;
 	struct nvme_command __iomem *sq_cmds_io;
···
 {
 	return sizeof(struct nvme_iod) +
 		nvme_iod_alloc_size(dev, NVME_INT_BYTES(dev), NVME_INT_PAGES);
-}
-
-static int nvmeq_irq(struct nvme_queue *nvmeq)
-{
-	return pci_irq_vector(to_pci_dev(nvmeq->dev->dev), nvmeq->cq_vector);
 }
 
 static int nvme_admin_init_hctx(struct blk_mq_hw_ctx *hctx, void *data,
···
 		spin_unlock_irq(&nvmeq->q_lock);
 		return 1;
 	}
-	vector = nvmeq_irq(nvmeq);
+	vector = nvmeq->cq_vector;
 	nvmeq->dev->online_queues--;
 	nvmeq->cq_vector = -1;
 	spin_unlock_irq(&nvmeq->q_lock);
···
 	if (!nvmeq->qid && nvmeq->dev->ctrl.admin_q)
 		blk_mq_stop_hw_queues(nvmeq->dev->ctrl.admin_q);
 
-	free_irq(vector, nvmeq);
+	pci_free_irq(to_pci_dev(nvmeq->dev->dev), vector, nvmeq);
 
 	return 0;
 }
···
 
 	nvmeq->q_dmadev = dev->dev;
 	nvmeq->dev = dev;
-	snprintf(nvmeq->irqname, sizeof(nvmeq->irqname), "nvme%dq%d",
-			dev->ctrl.instance, qid);
 	spin_lock_init(&nvmeq->q_lock);
 	nvmeq->cq_head = 0;
 	nvmeq->cq_phase = 1;
···
 
 static int queue_request_irq(struct nvme_queue *nvmeq)
 {
-	if (use_threaded_interrupts)
-		return request_threaded_irq(nvmeq_irq(nvmeq), nvme_irq_check,
-				nvme_irq, IRQF_SHARED, nvmeq->irqname, nvmeq);
-	else
-		return request_irq(nvmeq_irq(nvmeq), nvme_irq, IRQF_SHARED,
-				nvmeq->irqname, nvmeq);
+	struct pci_dev *pdev = to_pci_dev(nvmeq->dev->dev);
+	int nr = nvmeq->dev->ctrl.instance;
+
+	if (use_threaded_interrupts) {
+		return pci_request_irq(pdev, nvmeq->cq_vector, nvme_irq_check,
+				nvme_irq, nvmeq, "nvme%dq%d", nr, nvmeq->qid);
+	} else {
+		return pci_request_irq(pdev, nvmeq->cq_vector, nvme_irq,
+				NULL, nvmeq, "nvme%dq%d", nr, nvmeq->qid);
+	}
 }
 
 static void nvme_init_queue(struct nvme_queue *nvmeq, u16 qid)
···
 	}
 
 	/* Deregister the admin queue's interrupt */
-	free_irq(pci_irq_vector(pdev, 0), adminq);
+	pci_free_irq(pdev, 0, adminq);
 
 	/*
 	 * If we enable msix early due to not intx, disable it again before

drivers/of/of_pci.c

···
 EXPORT_SYMBOL_GPL(of_pci_get_host_bridge_resources);
 #endif /* CONFIG_OF_ADDRESS */
 
-#ifdef CONFIG_PCI_MSI
-
-static LIST_HEAD(of_pci_msi_chip_list);
-static DEFINE_MUTEX(of_pci_msi_chip_mutex);
-
-int of_pci_msi_chip_add(struct msi_controller *chip)
-{
-	if (!of_property_read_bool(chip->of_node, "msi-controller"))
-		return -EINVAL;
-
-	mutex_lock(&of_pci_msi_chip_mutex);
-	list_add(&chip->list, &of_pci_msi_chip_list);
-	mutex_unlock(&of_pci_msi_chip_mutex);
-
-	return 0;
-}
-EXPORT_SYMBOL_GPL(of_pci_msi_chip_add);
-
-void of_pci_msi_chip_remove(struct msi_controller *chip)
-{
-	mutex_lock(&of_pci_msi_chip_mutex);
-	list_del(&chip->list);
-	mutex_unlock(&of_pci_msi_chip_mutex);
-}
-EXPORT_SYMBOL_GPL(of_pci_msi_chip_remove);
-
-struct msi_controller *of_pci_find_msi_chip_by_node(struct device_node *of_node)
-{
-	struct msi_controller *c;
-
-	mutex_lock(&of_pci_msi_chip_mutex);
-	list_for_each_entry(c, &of_pci_msi_chip_list, list) {
-		if (c->of_node == of_node) {
-			mutex_unlock(&of_pci_msi_chip_mutex);
-			return c;
-		}
-	}
-	mutex_unlock(&of_pci_msi_chip_mutex);
-
-	return NULL;
-}
-EXPORT_SYMBOL_GPL(of_pci_find_msi_chip_by_node);
-
-#endif /* CONFIG_PCI_MSI */
-
 /**
  * of_pci_map_rid - Translate a requester ID through a downstream mapping.
  * @np: root complex device node.

drivers/pci/Kconfig

···
 source "drivers/pci/hotplug/Kconfig"
 source "drivers/pci/dwc/Kconfig"
 source "drivers/pci/host/Kconfig"
+source "drivers/pci/endpoint/Kconfig"
+source "drivers/pci/switch/Kconfig"

drivers/pci/Makefile

···
 
 obj-y		+= access.o bus.o probe.o host-bridge.o remove.o pci.o \
 			pci-driver.o search.o pci-sysfs.o rom.o setup-res.o \
-			irq.o vpd.o setup-bus.o vc.o
+			irq.o vpd.o setup-bus.o vc.o mmap.o
 obj-$(CONFIG_PROC_FS) += proc.o
 obj-$(CONFIG_SYSFS) += slot.o
 
···
 
 # PCI host controller drivers
 obj-y += host/
+obj-y += switch/

drivers/pci/access.c

···
  *
  * When access is locked, any userspace reads or writes to config
  * space and concurrent lock requests will sleep until access is
- * allowed via pci_cfg_access_unlocked again.
+ * allowed via pci_cfg_access_unlock() again.
  */
 void pci_cfg_access_lock(struct pci_dev *dev)
 {
···
 	int type = pci_pcie_type(dev);
 
 	return type == PCI_EXP_TYPE_ROOT_PORT ||
-	       type == PCI_EXP_TYPE_DOWNSTREAM;
+	       type == PCI_EXP_TYPE_DOWNSTREAM ||
+	       type == PCI_EXP_TYPE_PCIE_BRIDGE;
 }
 
 bool pcie_cap_has_lnkctl(const struct pci_dev *dev)
···
 	return ret;
 }
 EXPORT_SYMBOL(pcie_capability_clear_and_set_dword);
+
+int pci_read_config_byte(const struct pci_dev *dev, int where, u8 *val)
+{
+	if (pci_dev_is_disconnected(dev)) {
+		*val = ~0;
+		return -ENODEV;
+	}
+	return pci_bus_read_config_byte(dev->bus, dev->devfn, where, val);
+}
+EXPORT_SYMBOL(pci_read_config_byte);
+
+int pci_read_config_word(const struct pci_dev *dev, int where, u16 *val)
+{
+	if (pci_dev_is_disconnected(dev)) {
+		*val = ~0;
+		return -ENODEV;
+	}
+	return pci_bus_read_config_word(dev->bus, dev->devfn, where, val);
+}
+EXPORT_SYMBOL(pci_read_config_word);
+
+int pci_read_config_dword(const struct pci_dev *dev, int where,
+					u32 *val)
+{
+	if (pci_dev_is_disconnected(dev)) {
+		*val = ~0;
+		return -ENODEV;
+	}
+	return pci_bus_read_config_dword(dev->bus, dev->devfn, where, val);
+}
+EXPORT_SYMBOL(pci_read_config_dword);
+
+int pci_write_config_byte(const struct pci_dev *dev, int where, u8 val)
+{
+	if (pci_dev_is_disconnected(dev))
+		return -ENODEV;
+	return pci_bus_write_config_byte(dev->bus, dev->devfn, where, val);
+}
+EXPORT_SYMBOL(pci_write_config_byte);
+
+int pci_write_config_word(const struct pci_dev *dev, int where, u16 val)
+{
+	if (pci_dev_is_disconnected(dev))
+		return -ENODEV;
+	return pci_bus_write_config_word(dev->bus, dev->devfn, where, val);
+}
+EXPORT_SYMBOL(pci_write_config_word);
+
+int pci_write_config_dword(const struct pci_dev *dev, int where,
+					 u32 val)
+{
+	if (pci_dev_is_disconnected(dev))
+		return -ENODEV;
+	return pci_bus_write_config_dword(dev->bus, dev->devfn, where, val);
+}
+EXPORT_SYMBOL(pci_write_config_dword);

drivers/pci/dwc/Kconfig

···
 	depends on PCI_MSI_IRQ_DOMAIN
         select PCIE_DW
 
+config PCIE_DW_EP
+	bool
+	depends on PCI_ENDPOINT
+	select PCIE_DW
+
 config PCI_DRA7XX
 	bool "TI DRA7xx PCIe controller"
-	depends on PCI
+	depends on (PCI && PCI_MSI_IRQ_DOMAIN) || PCI_ENDPOINT
 	depends on OF && HAS_IOMEM && TI_PIPE3
+	help
+	 Enables support for the PCIe controller in the DRA7xx SoC. There
+	 are two instances of PCIe controller in DRA7xx. This controller can
+	 work either as EP or RC. In order to enable host-specific features
+	 PCI_DRA7XX_HOST must be selected and in order to enable device-
+	 specific features PCI_DRA7XX_EP must be selected. This uses
+	 the Designware core.
+
+if PCI_DRA7XX
+
+config PCI_DRA7XX_HOST
+	bool "PCI DRA7xx Host Mode"
+	depends on PCI
 	depends on PCI_MSI_IRQ_DOMAIN
 	select PCIE_DW_HOST
+	default y
 	help
-	 Enables support for the PCIe controller in the DRA7xx SoC.  There
-	 are two instances of PCIe controller in DRA7xx.  This controller can
-	 act both as EP and RC.  This reuses the Designware core.
+	 Enables support for the PCIe controller in the DRA7xx SoC to work in
+	 host mode.
+
+config PCI_DRA7XX_EP
+	bool "PCI DRA7xx Endpoint Mode"
+	depends on PCI_ENDPOINT
+	select PCIE_DW_EP
+	help
+	 Enables support for the PCIe controller in the DRA7xx SoC to work in
+	 endpoint mode.
+
+endif
 
 config PCIE_DW_PLAT
 	bool "Platform bus based DesignWare PCIe Controller"

drivers/pci/dwc/Makefile

···
 obj-$(CONFIG_PCIE_DW) += pcie-designware.o
 obj-$(CONFIG_PCIE_DW_HOST) += pcie-designware-host.o
+obj-$(CONFIG_PCIE_DW_EP) += pcie-designware-ep.o
 obj-$(CONFIG_PCIE_DW_PLAT) += pcie-designware-plat.o
-obj-$(CONFIG_PCI_DRA7XX) += pci-dra7xx.o
+ifneq ($(filter y,$(CONFIG_PCI_DRA7XX_HOST) $(CONFIG_PCI_DRA7XX_EP)),)
+        obj-$(CONFIG_PCI_DRA7XX) += pci-dra7xx.o
+endif
 obj-$(CONFIG_PCI_EXYNOS) += pci-exynos.o
 obj-$(CONFIG_PCI_IMX6) += pci-imx6.o
 obj-$(CONFIG_PCIE_SPEAR13XX) += pcie-spear13xx.o

drivers/pci/dwc/pci-dra7xx.c

···
  * published by the Free Software Foundation.
  */
 
+#include <linux/delay.h>
 #include <linux/err.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/irqdomain.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/of_device.h>
 #include <linux/of_gpio.h>
 #include <linux/of_pci.h>
 #include <linux/pci.h>
···
 #include <linux/pm_runtime.h>
 #include <linux/resource.h>
 #include <linux/types.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
 
 #include "pcie-designware.h"
 
···
 #define	MSI						BIT(4)
 #define	LEG_EP_INTERRUPTS (INTA | INTB | INTC | INTD)
 
+#define	PCIECTRL_TI_CONF_DEVICE_TYPE			0x0100
+#define	DEVICE_TYPE_EP					0x0
+#define	DEVICE_TYPE_LEG_EP				0x1
+#define	DEVICE_TYPE_RC					0x4
+
 #define	PCIECTRL_DRA7XX_CONF_DEVICE_CMD			0x0104
 #define	LTSSM_EN					0x1
 
···
 
 #define EXP_CAP_ID_OFFSET				0x70
 
+#define	PCIECTRL_TI_CONF_INTX_ASSERT			0x0124
+#define	PCIECTRL_TI_CONF_INTX_DEASSERT			0x0128
+
+#define	PCIECTRL_TI_CONF_MSI_XMT			0x012c
+#define MSI_REQ_GRANT					BIT(0)
+#define MSI_VECTOR_SHIFT				7
+
 struct dra7xx_pcie {
 	struct dw_pcie		*pci;
 	void __iomem		*base;		/* DT ti_conf */
···
 	struct phy		**phy;
 	int			link_gen;
 	struct irq_domain	*irq_domain;
+	enum dw_pcie_device_mode mode;
+};
+
+struct dra7xx_pcie_of_data {
+	enum dw_pcie_device_mode mode;
 };
 
 #define to_dra7xx_pcie(x)	dev_get_drvdata((x)->dev)
···
 	writel(value, pcie->base + offset);
 }
 
+static u64 dra7xx_pcie_cpu_addr_fixup(u64 pci_addr)
+{
+	return pci_addr & DRA7XX_CPU_TO_BUS_ADDR;
+}
+
 static int dra7xx_pcie_link_up(struct dw_pcie *pci)
 {
 	struct dra7xx_pcie *dra7xx = to_dra7xx_pcie(pci);
···
 	return !!(reg & LINK_UP);
 }
 
-static int dra7xx_pcie_establish_link(struct dra7xx_pcie *dra7xx)
+static void dra7xx_pcie_stop_link(struct dw_pcie *pci)
 {
-	struct dw_pcie *pci = dra7xx->pci;
+	struct dra7xx_pcie *dra7xx = to_dra7xx_pcie(pci);
+	u32 reg;
+
+	reg = dra7xx_pcie_readl(dra7xx, PCIECTRL_DRA7XX_CONF_DEVICE_CMD);
+	reg &= ~LTSSM_EN;
+	dra7xx_pcie_writel(dra7xx, PCIECTRL_DRA7XX_CONF_DEVICE_CMD, reg);
+}
+
+static int dra7xx_pcie_establish_link(struct dw_pcie *pci)
+{
+	struct dra7xx_pcie *dra7xx = to_dra7xx_pcie(pci);
 	struct device *dev = pci->dev;
 	u32 reg;
 	u32 exp_cap_off = EXP_CAP_ID_OFFSET;
···
 	reg |= LTSSM_EN;
 	dra7xx_pcie_writel(dra7xx, PCIECTRL_DRA7XX_CONF_DEVICE_CMD, reg);
 
-	return dw_pcie_wait_for_link(pci);
+	return 0;
+}
+
+static void dra7xx_pcie_enable_msi_interrupts(struct dra7xx_pcie *dra7xx)
+{
+	dra7xx_pcie_writel(dra7xx, PCIECTRL_DRA7XX_CONF_IRQSTATUS_MSI,
+			   ~LEG_EP_INTERRUPTS & ~MSI);
+
+	dra7xx_pcie_writel(dra7xx,
+			   PCIECTRL_DRA7XX_CONF_IRQENABLE_SET_MSI,
+			   MSI | LEG_EP_INTERRUPTS);
+}
+
+static void dra7xx_pcie_enable_wrapper_interrupts(struct dra7xx_pcie *dra7xx)
+{
+	dra7xx_pcie_writel(dra7xx, PCIECTRL_DRA7XX_CONF_IRQSTATUS_MAIN,
+			   ~INTERRUPTS);
+	dra7xx_pcie_writel(dra7xx, PCIECTRL_DRA7XX_CONF_IRQENABLE_SET_MAIN,
+			   INTERRUPTS);
 }
 
 static void dra7xx_pcie_enable_interrupts(struct dra7xx_pcie *dra7xx)
 {
-	dra7xx_pcie_writel(dra7xx, PCIECTRL_DRA7XX_CONF_IRQSTATUS_MAIN,
-			   ~INTERRUPTS);
-	dra7xx_pcie_writel(dra7xx,
-			   PCIECTRL_DRA7XX_CONF_IRQENABLE_SET_MAIN, INTERRUPTS);
-	dra7xx_pcie_writel(dra7xx, PCIECTRL_DRA7XX_CONF_IRQSTATUS_MSI,
-			   ~LEG_EP_INTERRUPTS & ~MSI);
-	dra7xx_pcie_writel(dra7xx, PCIECTRL_DRA7XX_CONF_IRQENABLE_SET_MSI,
-			   MSI | LEG_EP_INTERRUPTS);
+	dra7xx_pcie_enable_wrapper_interrupts(dra7xx);
+	dra7xx_pcie_enable_msi_interrupts(dra7xx);
 }
 
 static void dra7xx_pcie_host_init(struct pcie_port *pp)
···
 	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
 	struct dra7xx_pcie *dra7xx = to_dra7xx_pcie(pci);
 
-	pp->io_base &= DRA7XX_CPU_TO_BUS_ADDR;
-	pp->mem_base &= DRA7XX_CPU_TO_BUS_ADDR;
-	pp->cfg0_base &= DRA7XX_CPU_TO_BUS_ADDR;
-	pp->cfg1_base &= DRA7XX_CPU_TO_BUS_ADDR;
-
 	dw_pcie_setup_rc(pp);
 
-	dra7xx_pcie_establish_link(dra7xx);
+	dra7xx_pcie_establish_link(pci);
+	dw_pcie_wait_for_link(pci);
 	dw_pcie_msi_init(pp);
 	dra7xx_pcie_enable_interrupts(dra7xx);
 }
···
 	struct dra7xx_pcie *dra7xx = arg;
 	struct dw_pcie *pci = dra7xx->pci;
 	struct device *dev = pci->dev;
+	struct dw_pcie_ep *ep = &pci->ep;
 	u32 reg;
 
 	reg = dra7xx_pcie_readl(dra7xx, PCIECTRL_DRA7XX_CONF_IRQSTATUS_MAIN);
···
 	if (reg & LINK_REQ_RST)
 		dev_dbg(dev, "Link Request Reset\n");
 
-	if (reg & LINK_UP_EVT)
+	if (reg & LINK_UP_EVT) {
+		if (dra7xx->mode == DW_PCIE_EP_TYPE)
+			dw_pcie_ep_linkup(ep);
 		dev_dbg(dev, "Link-up state change\n");
+	}
 
 	if (reg & CFG_BME_EVT)
 		dev_dbg(dev, "CFG 'Bus Master Enable' change\n");
···
 	dra7xx_pcie_writel(dra7xx, PCIECTRL_DRA7XX_CONF_IRQSTATUS_MAIN, reg);
 
 	return IRQ_HANDLED;
+}
+
+static void dra7xx_pcie_ep_init(struct dw_pcie_ep *ep)
+{
+	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
+	struct dra7xx_pcie *dra7xx = to_dra7xx_pcie(pci);
+
+	dra7xx_pcie_enable_wrapper_interrupts(dra7xx);
+}
+
+static void dra7xx_pcie_raise_legacy_irq(struct dra7xx_pcie *dra7xx)
+{
+	dra7xx_pcie_writel(dra7xx, PCIECTRL_TI_CONF_INTX_ASSERT, 0x1);
+	mdelay(1);
+	dra7xx_pcie_writel(dra7xx, PCIECTRL_TI_CONF_INTX_DEASSERT, 0x1);
+}
+
+static void dra7xx_pcie_raise_msi_irq(struct dra7xx_pcie *dra7xx,
+				      u8 interrupt_num)
+{
+	u32 reg;
+
+	reg = (interrupt_num - 1) << MSI_VECTOR_SHIFT;
+	reg |= MSI_REQ_GRANT;
+	dra7xx_pcie_writel(dra7xx, PCIECTRL_TI_CONF_MSI_XMT, reg);
+}
+
+static int dra7xx_pcie_raise_irq(struct dw_pcie_ep *ep,
+				 enum pci_epc_irq_type type, u8 interrupt_num)
+{
+	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
+	struct dra7xx_pcie *dra7xx = to_dra7xx_pcie(pci);
+
+	switch (type) {
+	case PCI_EPC_IRQ_LEGACY:
+		dra7xx_pcie_raise_legacy_irq(dra7xx);
+		break;
+	case PCI_EPC_IRQ_MSI:
+		dra7xx_pcie_raise_msi_irq(dra7xx, interrupt_num);
+		break;
+	default:
+		dev_err(pci->dev, "UNKNOWN IRQ type\n");
+	}
+
+	return 0;
+}
+
+static struct dw_pcie_ep_ops pcie_ep_ops = {
+	.ep_init = dra7xx_pcie_ep_init,
+	.raise_irq = dra7xx_pcie_raise_irq,
+};
+
+static int __init dra7xx_add_pcie_ep(struct dra7xx_pcie *dra7xx,
+				     struct platform_device *pdev)
+{
+	int ret;
+	struct dw_pcie_ep *ep;
+	struct resource *res;
+	struct device *dev = &pdev->dev;
+	struct dw_pcie *pci = dra7xx->pci;
+
+	ep = &pci->ep;
+	ep->ops = &pcie_ep_ops;
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ep_dbics");
+	pci->dbi_base = devm_ioremap(dev, res->start, resource_size(res));
+	if (!pci->dbi_base)
+		return -ENOMEM;
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ep_dbics2");
+	pci->dbi_base2 = devm_ioremap(dev, res->start, resource_size(res));
+	if (!pci->dbi_base2)
+		return -ENOMEM;
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "addr_space");
+	if (!res)
+		return -EINVAL;
+
+	ep->phys_base = res->start;
+	ep->addr_size = resource_size(res);
+
+	ret = dw_pcie_ep_init(ep);
+	if (ret) {
+		dev_err(dev, "failed to initialize endpoint\n");
+		return ret;
+	}
+
+	return 0;
 }
 
 static int __init dra7xx_add_pcie_port(struct dra7xx_pcie *dra7xx,
···
 }
 
 static const struct dw_pcie_ops dw_pcie_ops = {
+	.cpu_addr_fixup = dra7xx_pcie_cpu_addr_fixup,
+	.start_link = dra7xx_pcie_establish_link,
+	.stop_link = dra7xx_pcie_stop_link,
 	.link_up = dra7xx_pcie_link_up,
 };
 
···
 	return ret;
 }
 
+static const struct dra7xx_pcie_of_data dra7xx_pcie_rc_of_data = {
+	.mode = DW_PCIE_RC_TYPE,
+};
+
+static const struct dra7xx_pcie_of_data dra7xx_pcie_ep_of_data = {
+	.mode = DW_PCIE_EP_TYPE,
+};
+
+static const struct of_device_id of_dra7xx_pcie_match[] = {
+	{
+		.compatible = "ti,dra7-pcie",
+		.data = &dra7xx_pcie_rc_of_data,
+	},
+	{
+		.compatible = "ti,dra7-pcie-ep",
+		.data = &dra7xx_pcie_ep_of_data,
+	},
+	{},
+};
+
+/*
+ * dra7xx_pcie_ep_unaligned_memaccess: workaround for AM572x/AM571x Errata i870
+ * @dra7xx: the dra7xx device where the workaround should be applied
+ *
+ * Access to the PCIe slave port that are not 32-bit aligned will result
+ * in incorrect mapping to TLP Address and Byte enable fields. Therefore,
+ * byte and half-word accesses are not possible to byte offset 0x1, 0x2, or
+ * 0x3.
+ *
+ * To avoid this issue set PCIE_SS1_AXI2OCP_LEGACY_MODE_ENABLE to 1.
+ */
+static int dra7xx_pcie_ep_unaligned_memaccess(struct device *dev)
+{
+	int ret;
+	struct device_node *np = dev->of_node;
+	struct of_phandle_args args;
+	struct regmap *regmap;
+
+	regmap = syscon_regmap_lookup_by_phandle(np,
+						 "ti,syscon-unaligned-access");
+	if (IS_ERR(regmap)) {
+		dev_dbg(dev, "can't get ti,syscon-unaligned-access\n");
+		return -EINVAL;
+	}
+
+	ret = of_parse_phandle_with_fixed_args(np, "ti,syscon-unaligned-access",
+					       2, 0, &args);
+	if (ret) {
+		dev_err(dev, "failed to parse ti,syscon-unaligned-access\n");
+		return ret;
+	}
+
+	ret = regmap_update_bits(regmap, args.args[0], args.args[1],
+				 args.args[1]);
+	if (ret)
+		dev_err(dev, "failed to enable unaligned access\n");
+
+	of_node_put(args.np);
+
+	return ret;
+}
+
 static int __init dra7xx_pcie_probe(struct platform_device *pdev)
 {
 	u32 reg;
···
 	struct device_node *np = dev->of_node;
 	char name[10];
 	struct gpio_desc *reset;
+	const struct of_device_id *match;
+	const struct dra7xx_pcie_of_data *data;
+	enum dw_pcie_device_mode mode;
+
+	match = of_match_device(of_match_ptr(of_dra7xx_pcie_match), dev);
+	if (!match)
+		return -EINVAL;
+
+	data = (struct dra7xx_pcie_of_data *)match->data;
+	mode = (enum dw_pcie_device_mode)data->mode;
 
 	dra7xx = devm_kzalloc(dev, sizeof(*dra7xx), GFP_KERNEL);
 	if (!dra7xx)
···
 	if (irq < 0) {
 		dev_err(dev, "missing IRQ resource\n");
 		return -EINVAL;
-	}
-
-	ret = devm_request_irq(dev, irq, dra7xx_pcie_irq_handler,
-			       IRQF_SHARED, "dra7xx-pcie-main", dra7xx);
-	if (ret) {
-		dev_err(dev, "failed to request irq\n");
-		return ret;
 	}
 
 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ti_conf");
···
 	if (dra7xx->link_gen < 0 || dra7xx->link_gen > 2)
 		dra7xx->link_gen = 2;
 
-	ret = dra7xx_add_pcie_port(dra7xx, pdev);
-	if (ret < 0)
+	switch (mode) {
+	case DW_PCIE_RC_TYPE:
+		dra7xx_pcie_writel(dra7xx, PCIECTRL_TI_CONF_DEVICE_TYPE,
+				   DEVICE_TYPE_RC);
+		ret = dra7xx_add_pcie_port(dra7xx, pdev);
+		if (ret < 0)
+			goto err_gpio;
+		break;
+	case DW_PCIE_EP_TYPE:
+		dra7xx_pcie_writel(dra7xx, PCIECTRL_TI_CONF_DEVICE_TYPE,
+				   DEVICE_TYPE_EP);
+
+		ret = dra7xx_pcie_ep_unaligned_memaccess(dev);
+		if (ret)
+			goto err_gpio;
+
+		ret = dra7xx_add_pcie_ep(dra7xx, pdev);
+		if (ret < 0)
+			goto err_gpio;
+		break;
+	default:
+		dev_err(dev, "INVALID device type %d\n", mode);
+	}
+	dra7xx->mode = mode;
+
+	ret = devm_request_irq(dev, irq, dra7xx_pcie_irq_handler,
+			       IRQF_SHARED, "dra7xx-pcie-main", dra7xx);
+	if (ret) {
+		dev_err(dev, "failed to request irq\n");
 		goto err_gpio;
+	}
 
 	return 0;
 
···
 	struct dw_pcie *pci = dra7xx->pci;
 	u32 val;
 
+	if (dra7xx->mode != DW_PCIE_RC_TYPE)
+		return 0;
+
 	/* clear MSE */
 	val = dw_pcie_readl_dbi(pci, PCI_COMMAND);
 	val &= ~PCI_COMMAND_MEMORY;
···
 	struct dra7xx_pcie *dra7xx = dev_get_drvdata(dev);
 	struct dw_pcie *pci = dra7xx->pci;
 	u32 val;
+
+	if (dra7xx->mode != DW_PCIE_RC_TYPE)
+		return 0;
 
 	/* set MSE */
 	val = dw_pcie_readl_dbi(pci, PCI_COMMAND);
···
 	SET_SYSTEM_SLEEP_PM_OPS(dra7xx_pcie_suspend, dra7xx_pcie_resume)
 	SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(dra7xx_pcie_suspend_noirq,
 				      dra7xx_pcie_resume_noirq)
-};
-
-static const struct of_device_id of_dra7xx_pcie_match[] = {
-	{ .compatible = "ti,dra7-pcie", },
-	{},
 };
 
 static struct platform_driver dra7xx_pcie_driver = {

drivers/pci/dwc/pci-exynos.c

···
 		exynos_pcie_msi_init(ep);
 }
 
-static u32 exynos_pcie_readl_dbi(struct dw_pcie *pci, u32 reg)
+static u32 exynos_pcie_read_dbi(struct dw_pcie *pci, void __iomem *base,
+				u32 reg, size_t size)
 {
 	struct exynos_pcie *ep = to_exynos_pcie(pci);
 	u32 val;
 
 	exynos_pcie_sideband_dbi_r_mode(ep, true);
-	val = readl(pci->dbi_base + reg);
+	dw_pcie_read(base + reg, size, &val);
 	exynos_pcie_sideband_dbi_r_mode(ep, false);
 	return val;
 }
 
-static void exynos_pcie_writel_dbi(struct dw_pcie *pci, u32 reg, u32 val)
+static void exynos_pcie_write_dbi(struct dw_pcie *pci, void __iomem *base,
+				  u32 reg, size_t size, u32 val)
 {
 	struct exynos_pcie *ep = to_exynos_pcie(pci);
 
 	exynos_pcie_sideband_dbi_w_mode(ep, true);
-	writel(val, pci->dbi_base + reg);
+	dw_pcie_write(base + reg, size, val);
 	exynos_pcie_sideband_dbi_w_mode(ep, false);
 }
 
···
 }
 
 static const struct dw_pcie_ops dw_pcie_ops = {
-	.readl_dbi = exynos_pcie_readl_dbi,
-	.writel_dbi = exynos_pcie_writel_dbi,
+	.read_dbi = exynos_pcie_read_dbi,
+	.write_dbi = exynos_pcie_write_dbi,
 	.link_up = exynos_pcie_link_up,
 };
 

drivers/pci/dwc/pci-imx6.c

···
 #include <linux/kernel.h>
 #include <linux/mfd/syscon.h>
 #include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
+#include <linux/mfd/syscon/imx7-iomuxc-gpr.h>
 #include <linux/module.h>
 #include <linux/of_gpio.h>
 #include <linux/of_device.h>
···
 #include <linux/signal.h>
 #include <linux/types.h>
 #include <linux/interrupt.h>
+#include <linux/reset.h>
 
 #include "pcie-designware.h"
 
···
 	IMX6Q,
 	IMX6SX,
 	IMX6QP,
+	IMX7D,
 };
 
 struct imx6_pcie {
···
 	struct clk		*pcie_inbound_axi;
 	struct clk		*pcie;
 	struct regmap		*iomuxc_gpr;
+	struct reset_control	*pciephy_reset;
+	struct reset_control	*apps_reset;
 	enum imx6_pcie_variants variant;
 	u32			tx_deemph_gen1;
 	u32			tx_deemph_gen2_3p5db;
···
 	u32			tx_swing_low;
 	int			link_gen;
 };
+
+/* Parameters for the waiting for PCIe PHY PLL to lock on i.MX7 */
+#define PHY_PLL_LOCK_WAIT_MAX_RETRIES	2000
+#define PHY_PLL_LOCK_WAIT_USLEEP_MIN	50
+#define PHY_PLL_LOCK_WAIT_USLEEP_MAX	200
 
 /* PCIe Root Complex registers (memory-mapped) */
 #define PCIE_RC_LCR				0x7c
···
 static void imx6_pcie_assert_core_reset(struct imx6_pcie *imx6_pcie)
 {
 	switch (imx6_pcie->variant) {
+	case IMX7D:
+		reset_control_assert(imx6_pcie->pciephy_reset);
+		reset_control_assert(imx6_pcie->apps_reset);
+		break;
 	case IMX6SX:
 		regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
 				   IMX6SX_GPR12_PCIE_TEST_POWERDOWN,
···
 		regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
 				   IMX6Q_GPR1_PCIE_REF_CLK_EN, 1 << 16);
 		break;
+	case IMX7D:
+		break;
 	}
 
 	return ret;
+}
+
+static void imx7d_pcie_wait_for_phy_pll_lock(struct imx6_pcie *imx6_pcie)
+{
+	u32 val;
+	unsigned int retries;
+	struct device *dev = imx6_pcie->pci->dev;
+
+	for (retries = 0; retries < PHY_PLL_LOCK_WAIT_MAX_RETRIES; retries++) {
+		regmap_read(imx6_pcie->iomuxc_gpr, IOMUXC_GPR22, &val);
+
+		if (val & IMX7D_GPR22_PCIE_PHY_PLL_LOCKED)
+			return;
+
+		usleep_range(PHY_PLL_LOCK_WAIT_USLEEP_MIN,
+			     PHY_PLL_LOCK_WAIT_USLEEP_MAX);
+	}
+
+	dev_err(dev, "PCIe PLL lock timeout\n");
 }
 
 static void imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
···
 	}
 
 	switch (imx6_pcie->variant) {
+	case IMX7D:
+		reset_control_deassert(imx6_pcie->pciephy_reset);
+		imx7d_pcie_wait_for_phy_pll_lock(imx6_pcie);
+		break;
 	case IMX6SX:
 		regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR5,
 				   IMX6SX_GPR5_PCIE_BTNRST_RESET, 0);
···
 
 static void imx6_pcie_init_phy(struct imx6_pcie *imx6_pcie)
 {
-	if (imx6_pcie->variant == IMX6SX)
+	switch (imx6_pcie->variant) {
+	case IMX7D:
+		regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
+				   IMX7D_GPR12_PCIE_PHY_REFCLK_SEL, 0);
+		break;
+	case IMX6SX:
 		regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
 				   IMX6SX_GPR12_PCIE_RX_EQ_MASK,
 				   IMX6SX_GPR12_PCIE_RX_EQ_2);
+		/* FALLTHROUGH */
+	default:
+		regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
+				   IMX6Q_GPR12_PCIE_CTL_2, 0 << 10);
 
-	regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
-			IMX6Q_GPR12_PCIE_CTL_2, 0 << 10);
+		/* configure constant input signal to the pcie ctrl and phy */
+		regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
+				   IMX6Q_GPR12_LOS_LEVEL, 9 << 4);
 
-	/* configure constant input signal to the pcie ctrl and phy */
+		regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
+				   IMX6Q_GPR8_TX_DEEMPH_GEN1,
+				   imx6_pcie->tx_deemph_gen1 << 0);
+		regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
+				   IMX6Q_GPR8_TX_DEEMPH_GEN2_3P5DB,
+				   imx6_pcie->tx_deemph_gen2_3p5db << 6);
+		regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
+				   IMX6Q_GPR8_TX_DEEMPH_GEN2_6DB,
+				   imx6_pcie->tx_deemph_gen2_6db << 12);
+		regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
+				   IMX6Q_GPR8_TX_SWING_FULL,
+				   imx6_pcie->tx_swing_full << 18);
+		regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
+				   IMX6Q_GPR8_TX_SWING_LOW,
+				   imx6_pcie->tx_swing_low << 25);
+		break;
+	}
+
 	regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
 			IMX6Q_GPR12_DEVICE_TYPE, PCI_EXP_TYPE_ROOT_PORT << 12);
-	regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
-			IMX6Q_GPR12_LOS_LEVEL, 9 << 4);
-
-	regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
-			   IMX6Q_GPR8_TX_DEEMPH_GEN1,
-			   imx6_pcie->tx_deemph_gen1 << 0);
-	regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
-			   IMX6Q_GPR8_TX_DEEMPH_GEN2_3P5DB,
-			   imx6_pcie->tx_deemph_gen2_3p5db << 6);
-	regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
-			   IMX6Q_GPR8_TX_DEEMPH_GEN2_6DB,
-			   imx6_pcie->tx_deemph_gen2_6db << 12);
-	regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
-			   IMX6Q_GPR8_TX_SWING_FULL,
-			   imx6_pcie->tx_swing_full << 18);
-	regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
-			   IMX6Q_GPR8_TX_SWING_LOW,
-			   imx6_pcie->tx_swing_low << 25);
 }
 
 static int imx6_pcie_wait_for_link(struct imx6_pcie *imx6_pcie)
···
 	dw_pcie_writel_dbi(pci, PCIE_RC_LCR, tmp);
 
 	/* Start LTSSM. */
-	regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
-			IMX6Q_GPR12_PCIE_CTL_2, 1 << 10);
+	if (imx6_pcie->variant == IMX7D)
+		reset_control_deassert(imx6_pcie->apps_reset);
+	else
+		regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
+				   IMX6Q_GPR12_PCIE_CTL_2, 1 << 10);
 
 	ret = imx6_pcie_wait_for_link(imx6_pcie);
 	if (ret)
···
 		tmp &= ~PCIE_RC_LCR_MAX_LINK_SPEEDS_MASK;
 		tmp |= PCIE_RC_LCR_MAX_LINK_SPEEDS_GEN2;
 		dw_pcie_writel_dbi(pci, PCIE_RC_LCR, tmp);
+
+		/*
+		 * Start Directed Speed Change so the best possible
+		 * speed both link partners support can be negotiated.
+		 */
+		tmp = dw_pcie_readl_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL);
+		tmp |= PORT_LOGIC_SPEED_CHANGE;
+		dw_pcie_writel_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL, tmp);
+
+		if (imx6_pcie->variant != IMX7D) {
+			/*
+			 * On i.MX7, DIRECT_SPEED_CHANGE behaves differently
+			 * from i.MX6 family when no link speed transition
+			 * occurs and we go Gen1 -> yep, Gen1. The difference
+			 * is that, in such case, it will not be cleared by HW
+			 * which will cause the following code to report false
+			 * failure.
+			 */
+
+			ret = imx6_pcie_wait_for_speed_change(imx6_pcie);
+			if (ret) {
+				dev_err(dev, "Failed to bring link up!\n");
+				goto err_reset_phy;
+			}
+		}
+
+		/* Make sure link training is finished as well! */
+		ret = imx6_pcie_wait_for_link(imx6_pcie);
+		if (ret) {
+			dev_err(dev, "Failed to bring link up!\n");
+			goto err_reset_phy;
+		}
 	} else {
 		dev_info(dev, "Link: Gen2 disabled\n");
-	}
-
-	/*
-	 * Start Directed Speed Change so the best possible speed both link
-	 * partners support can be negotiated.
-	 */
-	tmp = dw_pcie_readl_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL);
-	tmp |= PORT_LOGIC_SPEED_CHANGE;
-	dw_pcie_writel_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL, tmp);
-
-	ret = imx6_pcie_wait_for_speed_change(imx6_pcie);
-	if (ret) {
-		dev_err(dev, "Failed to bring link up!\n");
-		goto err_reset_phy;
-	}
-
-	/* Make sure link training is finished as well! */
-	ret = imx6_pcie_wait_for_link(imx6_pcie);
-	if (ret) {
-		dev_err(dev, "Failed to bring link up!\n");
-		goto err_reset_phy;
 	}
 
 	tmp = dw_pcie_readl_dbi(pci, PCIE_RC_LCSR);
···
 	.host_init = imx6_pcie_host_init,
 };
 
-static int __init imx6_add_pcie_port(struct imx6_pcie *imx6_pcie,
-				     struct platform_device *pdev)
+static int imx6_add_pcie_port(struct imx6_pcie *imx6_pcie,
+			      struct platform_device *pdev)
 {
 	struct dw_pcie *pci = imx6_pcie->pci;
 	struct pcie_port *pp = &pci->pp;
···
 	.link_up = imx6_pcie_link_up,
 };
 
-static int __init imx6_pcie_probe(struct platform_device *pdev)
+static int imx6_pcie_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	struct dw_pcie *pci;
···
 	imx6_pcie->variant =
 		(enum imx6_pcie_variants)of_device_get_match_data(dev);
 
-	/* Added for PCI abort handling */
-	hook_fault_code(16 + 6, imx6q_pcie_abort_handler, SIGBUS, 0,
-		"imprecise external abort");
-
 	dbi_base = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	pci->dbi_base = devm_ioremap_resource(dev, dbi_base);
 	if (IS_ERR(pci->dbi_base))
···
 			dev_err(dev, "unable to get reset gpio\n");
 			return ret;
 		}
+	} else if (imx6_pcie->reset_gpio == -EPROBE_DEFER) {
+		return imx6_pcie->reset_gpio;
 	}
 
 	/* Fetch clocks */
···
 		return PTR_ERR(imx6_pcie->pcie);
 	}
 
-	if (imx6_pcie->variant == IMX6SX) {
+	switch (imx6_pcie->variant) {
+	case IMX6SX:
 		imx6_pcie->pcie_inbound_axi = devm_clk_get(dev,
 							   "pcie_inbound_axi");
 		if (IS_ERR(imx6_pcie->pcie_inbound_axi)) {
 			dev_err(dev, "pcie_inbound_axi clock missing or invalid\n");
 			return PTR_ERR(imx6_pcie->pcie_inbound_axi);
 		}
+		break;
+	case IMX7D:
+		imx6_pcie->pciephy_reset = devm_reset_control_get(dev,
+								  "pciephy");
+		if (IS_ERR(imx6_pcie->pciephy_reset)) {
+			dev_err(dev, "Failed to get PCIEPHY reset control\n");
+			return PTR_ERR(imx6_pcie->pciephy_reset);
+		}
+
+		imx6_pcie->apps_reset = devm_reset_control_get(dev, "apps");
+		if (IS_ERR(imx6_pcie->apps_reset)) {
+			dev_err(dev, "Failed to get PCIE APPS reset control\n");
+			return PTR_ERR(imx6_pcie->apps_reset);
+		}
+		break;
+	default:
+		break;
 	}
 
 	/* Grab GPR config register range */
···
 	{ .compatible = "fsl,imx6q-pcie",  .data = (void *)IMX6Q,  },
 	{ .compatible = "fsl,imx6sx-pcie", .data = (void *)IMX6SX, },
 	{ .compatible = "fsl,imx6qp-pcie", .data = (void *)IMX6QP, },
+	{ .compatible = "fsl,imx7d-pcie",  .data = (void *)IMX7D,  },
 	{},
 };
 
···
 	.driver = {
 		.name	= "imx6q-pcie",
 		.of_match_table = imx6_pcie_of_match,
+		.suppress_bind_attrs = true,
 	},
+	.probe    = imx6_pcie_probe,
 	.shutdown = imx6_pcie_shutdown,
 };
 
 static int __init imx6_pcie_init(void)
 {
-	return platform_driver_probe(&imx6_pcie_driver, imx6_pcie_probe);
+	/*
+	 * Since probe() can be deferred we need to make sure that
+	 * hook_fault_code is not called after __init memory is freed
+	 * by kernel and since imx6q_pcie_abort_handler() is a no-op,
+	 * we can install the handler here without risking it
+	 * accessing some uninitialized driver state.
+	 */
+	hook_fault_code(16 + 6, imx6q_pcie_abort_handler, SIGBUS, 0,
+			"imprecise external abort");
+
+	return platform_driver_register(&imx6_pcie_driver);
 }
 device_initcall(imx6_pcie_init);

drivers/pci/dwc/pci-keystone-dw.c

···
 
 	/* Index 0 is the config reg. space address */
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	pci->dbi_base = devm_ioremap_resource(dev, res);
+	pci->dbi_base = devm_pci_remap_cfg_resource(dev, res);
 	if (IS_ERR(pci->dbi_base))
 		return PTR_ERR(pci->dbi_base);
 

drivers/pci/dwc/pci-layerscape.c

···
 	pcie->pci = pci;
 
 	dbi_base = platform_get_resource_byname(pdev, IORESOURCE_MEM, "regs");
-	pci->dbi_base = devm_ioremap_resource(dev, dbi_base);
+	pci->dbi_base = devm_pci_remap_cfg_resource(dev, dbi_base);
 	if (IS_ERR(pci->dbi_base))
 		return PTR_ERR(pci->dbi_base);
 
···
 	.driver = {
 		.name = "layerscape-pcie",
 		.of_match_table = ls_pcie_of_match,
+		.suppress_bind_attrs = true,
 	},
 };
 builtin_platform_driver_probe(ls_pcie_driver, ls_pcie_probe);

drivers/pci/dwc/pcie-armada8k.c

···
 
 	/* Get the dw-pcie unit configuration/control registers base. */
 	base = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ctrl");
-	pci->dbi_base = devm_ioremap_resource(dev, base);
+	pci->dbi_base = devm_pci_remap_cfg_resource(dev, base);
 	if (IS_ERR(pci->dbi_base)) {
 		dev_err(dev, "couldn't remap regs base %p\n", base);
 		ret = PTR_ERR(pci->dbi_base);
···
 	.driver = {
 		.name	= "armada8k-pcie",
 		.of_match_table = of_match_ptr(armada8k_pcie_of_match),
+		.suppress_bind_attrs = true,
 	},
 };
 builtin_platform_driver(armada8k_pcie_driver);

drivers/pci/dwc/pcie-artpec6.c

···
 	regmap_write(artpec6_pcie->regmap, offset, val);
 }
 
+static u64 artpec6_pcie_cpu_addr_fixup(u64 pci_addr)
+{
+	return pci_addr & ARTPEC6_CPU_TO_BUS_ADDR;
+}
+
 static int artpec6_pcie_establish_link(struct artpec6_pcie *artpec6_pcie)
 {
 	struct dw_pcie *pci = artpec6_pcie->pci;
···
 	 * driver changes the class code. That register needs DBI write enable.
 	 */
 	dw_pcie_writel_dbi(pci, MISC_CONTROL_1_OFF, DBI_RO_WR_EN);
-
-	pp->io_base &= ARTPEC6_CPU_TO_BUS_ADDR;
-	pp->mem_base &= ARTPEC6_CPU_TO_BUS_ADDR;
-	pp->cfg0_base &= ARTPEC6_CPU_TO_BUS_ADDR;
-	pp->cfg1_base &= ARTPEC6_CPU_TO_BUS_ADDR;
 
 	/* setup root complex */
 	dw_pcie_setup_rc(pp);
···
 }
 
 static const struct dw_pcie_ops dw_pcie_ops = {
+	.cpu_addr_fixup = artpec6_pcie_cpu_addr_fixup,
 };
 
 static int artpec6_pcie_probe(struct platform_device *pdev)
···
 	.driver = {
 		.name	= "artpec6-pcie",
 		.of_match_table = artpec6_pcie_of_match,
+		.suppress_bind_attrs = true,
 	},
 };
 builtin_platform_driver(artpec6_pcie_driver);

drivers/pci/dwc/pcie-designware-ep.c

···
+/**
+ * Synopsys Designware PCIe Endpoint controller driver
+ *
+ * Copyright (C) 2017 Texas Instruments
+ * Author: Kishon Vijay Abraham I <[e-mail]>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 of
+ * the License as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/of.h>
+
+#include "pcie-designware.h"
+#include <linux/pci-epc.h>
+#include <linux/pci-epf.h>
+
+void dw_pcie_ep_linkup(struct dw_pcie_ep *ep)
+{
+	struct pci_epc *epc = ep->epc;
+
+	pci_epc_linkup(epc);
+}
+
+static void dw_pcie_ep_reset_bar(struct dw_pcie *pci, enum pci_barno bar)
+{
+	u32 reg;
+
+	reg = PCI_BASE_ADDRESS_0 + (4 * bar);
+	dw_pcie_writel_dbi2(pci, reg, 0x0);
+	dw_pcie_writel_dbi(pci, reg, 0x0);
+}
+
+static int dw_pcie_ep_write_header(struct pci_epc *epc,
+				   struct pci_epf_header *hdr)
+{
+	struct dw_pcie_ep *ep = epc_get_drvdata(epc);
+	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
+
+	dw_pcie_writew_dbi(pci, PCI_VENDOR_ID, hdr->vendorid);
+	dw_pcie_writew_dbi(pci, PCI_DEVICE_ID, hdr->deviceid);
+	dw_pcie_writeb_dbi(pci, PCI_REVISION_ID, hdr->revid);
+	dw_pcie_writeb_dbi(pci, PCI_CLASS_PROG, hdr->progif_code);
+	dw_pcie_writew_dbi(pci, PCI_CLASS_DEVICE,
+			   hdr->subclass_code | hdr->baseclass_code << 8);
+	dw_pcie_writeb_dbi(pci, PCI_CACHE_LINE_SIZE,
+			   hdr->cache_line_size);
+	dw_pcie_writew_dbi(pci, PCI_SUBSYSTEM_VENDOR_ID,
+			   hdr->subsys_vendor_id);
+	dw_pcie_writew_dbi(pci, PCI_SUBSYSTEM_ID, hdr->subsys_id);
+	dw_pcie_writeb_dbi(pci, PCI_INTERRUPT_PIN,
+			   hdr->interrupt_pin);
+
+	return 0;
+}
+
+static int dw_pcie_ep_inbound_atu(struct dw_pcie_ep *ep, enum pci_barno bar,
+				  dma_addr_t cpu_addr,
+				  enum dw_pcie_as_type as_type)
+{
+	int ret;
+	u32 free_win;
+	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
+
+	free_win = find_first_zero_bit(&ep->ib_window_map,
+				       sizeof(ep->ib_window_map));
+	if (free_win >= ep->num_ib_windows) {
+		dev_err(pci->dev, "no free inbound window\n");
+		return -EINVAL;
+	}
+
+	ret = dw_pcie_prog_inbound_atu(pci, free_win, bar, cpu_addr,
+				       as_type);
+	if (ret < 0) {
+		dev_err(pci->dev, "Failed to program IB window\n");
+		return ret;
+	}
+
+	ep->bar_to_atu[bar] = free_win;
+	set_bit(free_win, &ep->ib_window_map);
+
+	return 0;
+}
+
+static int dw_pcie_ep_outbound_atu(struct dw_pcie_ep *ep, phys_addr_t phys_addr,
+				   u64 pci_addr, size_t size)
+{
+	u32 free_win;
+	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
+
+	free_win = find_first_zero_bit(&ep->ob_window_map,
+				       sizeof(ep->ob_window_map));
+	if (free_win >= ep->num_ob_windows) {
+		dev_err(pci->dev, "no free outbound window\n");
+		return -EINVAL;
+	}
+
+	dw_pcie_prog_outbound_atu(pci, free_win, PCIE_ATU_TYPE_MEM,
+				  phys_addr, pci_addr, size);
+
+	set_bit(free_win, &ep->ob_window_map);
+	ep->outbound_addr[free_win] = phys_addr;
+
+	return 0;
+}
+
+static void dw_pcie_ep_clear_bar(struct pci_epc *epc, enum pci_barno bar)
+{
+	struct dw_pcie_ep *ep = epc_get_drvdata(epc);
+	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
+	u32 atu_index = ep->bar_to_atu[bar];
+
+	dw_pcie_ep_reset_bar(pci, bar);
+
+	dw_pcie_disable_atu(pci, atu_index, DW_PCIE_REGION_INBOUND);
+	clear_bit(atu_index, &ep->ib_window_map);
+}
+
+static int dw_pcie_ep_set_bar(struct pci_epc *epc, enum pci_barno bar,
+			      dma_addr_t bar_phys, size_t size, int flags)
+{
+	int ret;
+	struct dw_pcie_ep *ep = epc_get_drvdata(epc);
+	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
+	enum dw_pcie_as_type as_type;
+	u32 reg = PCI_BASE_ADDRESS_0 + (4 * bar);
+
+	if (!(flags & PCI_BASE_ADDRESS_SPACE))
+		as_type = DW_PCIE_AS_MEM;
+	else
+		as_type = DW_PCIE_AS_IO;
+
+	ret = dw_pcie_ep_inbound_atu(ep, bar, bar_phys, as_type);
+	if (ret)
+		return ret;
+
+	dw_pcie_writel_dbi2(pci, reg, size - 1);
+	dw_pcie_writel_dbi(pci, reg, flags);
+
+	return 0;
+}
+
+static int dw_pcie_find_index(struct dw_pcie_ep *ep, phys_addr_t addr,
+			      u32 *atu_index)
+{
+	u32 index;
+
+	for (index = 0; index < ep->num_ob_windows; index++) {
+		if (ep->outbound_addr[index] != addr)
+			continue;
+		*atu_index = index;
+		return 0;
+	}
+
+	return -EINVAL;
+}
+
+static void dw_pcie_ep_unmap_addr(struct pci_epc *epc, phys_addr_t addr)
+{
+	int ret;
+	u32 atu_index;
+	struct dw_pcie_ep *ep = epc_get_drvdata(epc);
+	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
+
+	ret = dw_pcie_find_index(ep, addr, &atu_index);
+	if (ret < 0)
+		return;
+
+	dw_pcie_disable_atu(pci, atu_index, DW_PCIE_REGION_OUTBOUND);
+	clear_bit(atu_index, &ep->ob_window_map);
+}
+
+static int dw_pcie_ep_map_addr(struct pci_epc *epc, phys_addr_t addr,
+			       u64 pci_addr, size_t size)
+{
+	int ret;
+	struct dw_pcie_ep *ep = epc_get_drvdata(epc);
+	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
+
+	ret = dw_pcie_ep_outbound_atu(ep, addr, pci_addr, size);
+	if (ret) {
+		dev_err(pci->dev, "failed to enable address\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int dw_pcie_ep_get_msi(struct pci_epc *epc)
+{
+	int val;
+	u32 lower_addr;
+	u32 upper_addr;
+	struct dw_pcie_ep *ep = epc_get_drvdata(epc);
+	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
+
+	val = dw_pcie_readb_dbi(pci, MSI_MESSAGE_CONTROL);
+	val = (val & MSI_CAP_MME_MASK) >> MSI_CAP_MME_SHIFT;
+
+	lower_addr = dw_pcie_readl_dbi(pci, MSI_MESSAGE_ADDR_L32);
+	upper_addr = dw_pcie_readl_dbi(pci, MSI_MESSAGE_ADDR_U32);
+
+	if (!(lower_addr || upper_addr))
+		return -EINVAL;
+
+	return val;
+}
+
+static int dw_pcie_ep_set_msi(struct pci_epc *epc, u8 encode_int)
+{
+	int val;
+	struct dw_pcie_ep *ep = epc_get_drvdata(epc);
+	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
+
+	val = (encode_int << MSI_CAP_MMC_SHIFT);
+	dw_pcie_writew_dbi(pci, MSI_MESSAGE_CONTROL, val);
+
+	return 0;
+}
+
+static int dw_pcie_ep_raise_irq(struct pci_epc *epc,
+				enum pci_epc_irq_type type, u8 interrupt_num)
+{
+	struct dw_pcie_ep *ep = epc_get_drvdata(epc);
+
+	if (!ep->ops->raise_irq)
+		return -EINVAL;
+
+	return ep->ops->raise_irq(ep, type, interrupt_num);
+}
+
+static void dw_pcie_ep_stop(struct pci_epc *epc)
+{
+	struct dw_pcie_ep *ep = epc_get_drvdata(epc);
+	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
+
+	if (!pci->ops->stop_link)
+		return;
+
+	pci->ops->stop_link(pci);
+}
+
+static int dw_pcie_ep_start(struct pci_epc *epc)
+{
+	struct dw_pcie_ep *ep = epc_get_drvdata(epc);
+	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
+
+	if (!pci->ops->start_link)
+		return -EINVAL;
+
+	return pci->ops->start_link(pci);
+}
+
+static const struct pci_epc_ops epc_ops = {
+	.write_header		= dw_pcie_ep_write_header,
+	.set_bar		= dw_pcie_ep_set_bar,
+	.clear_bar		= dw_pcie_ep_clear_bar,
+	.map_addr		= dw_pcie_ep_map_addr,
+	.unmap_addr		= dw_pcie_ep_unmap_addr,
+	.set_msi		= dw_pcie_ep_set_msi,
+	.get_msi		= dw_pcie_ep_get_msi,
+	.raise_irq		= dw_pcie_ep_raise_irq,
+	.start			= dw_pcie_ep_start,
+	.stop			= dw_pcie_ep_stop,
+};
+
+void dw_pcie_ep_exit(struct dw_pcie_ep *ep)
+{
+	struct pci_epc *epc = ep->epc;
+
+	pci_epc_mem_exit(epc);
+}
+
+int dw_pcie_ep_init(struct dw_pcie_ep *ep)
+{
+	int ret;
+	void *addr;
+	enum pci_barno bar;
+	struct pci_epc *epc;
+	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
+	struct device *dev = pci->dev;
+	struct device_node *np = dev->of_node;
+
+	if (!pci->dbi_base || !pci->dbi_base2) {
+		dev_err(dev, "dbi_base/deb_base2 is not populated\n");
+		return -EINVAL;
+	}
+
+	ret = of_property_read_u32(np, "num-ib-windows", &ep->num_ib_windows);
+	if (ret < 0) {
+		dev_err(dev, "unable to read *num-ib-windows* property\n");
+		return ret;
+	}
+
+	ret = of_property_read_u32(np, "num-ob-windows", &ep->num_ob_windows);
+	if (ret < 0) {
+		dev_err(dev, "unable to read *num-ob-windows* property\n");
+		return ret;
+	}
+
+	addr = devm_kzalloc(dev, sizeof(phys_addr_t) * ep->num_ob_windows,
+			    GFP_KERNEL);
+	if (!addr)
+		return -ENOMEM;
+	ep->outbound_addr = addr;
+
+	for (bar = BAR_0; bar <= BAR_5; bar++)
+		dw_pcie_ep_reset_bar(pci, bar);
+
+	if (ep->ops->ep_init)
+		ep->ops->ep_init(ep);
+
+	epc = devm_pci_epc_create(dev, &epc_ops);
+	if (IS_ERR(epc)) {
+		dev_err(dev, "failed to create epc device\n");
+		return PTR_ERR(epc);
+	}
+
+	ret = of_property_read_u8(np, "max-functions", &epc->max_functions);
+	if (ret < 0)
+		epc->max_functions = 1;
+
+	ret = pci_epc_mem_init(epc, ep->phys_base, ep->addr_size);
+	if (ret < 0) {
+		dev_err(dev, "Failed to initialize address space\n");
+		return ret;
+	}
+
+	ep->epc = epc;
+	epc_set_drvdata(epc, ep);
+	dw_pcie_setup(pci);
+
+	return 0;
+}

drivers/pci/dwc/pcie-designware-host.c

···
 /* MSI int handler */
 irqreturn_t dw_handle_msi_irq(struct pcie_port *pp)
 {
-	unsigned long val;
+	u32 val;
 	int i, pos, irq;
 	irqreturn_t ret = IRQ_NONE;
 
 	for (i = 0; i < MAX_MSI_CTRLS; i++) {
 		dw_pcie_rd_own_conf(pp, PCIE_MSI_INTR0_STATUS + i * 12, 4,
-				    (u32 *)&val);
-		if (val) {
-			ret = IRQ_HANDLED;
-			pos = 0;
-			while ((pos = find_next_bit(&val, 32, pos)) != 32) {
-				irq = irq_find_mapping(pp->irq_domain,
-						       i * 32 + pos);
-				dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_STATUS +
-						    i * 12, 4, 1 << pos);
-				generic_handle_irq(irq);
-				pos++;
-			}
+				    &val);
+		if (!val)
+			continue;
+
+		ret = IRQ_HANDLED;
+		pos = 0;
+		while ((pos = find_next_bit((unsigned long *) &val, 32,
+					    pos)) != 32) {
+			irq = irq_find_mapping(pp->irq_domain, i * 32 + pos);
+			dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_STATUS + i * 12,
+					    4, 1 << pos);
+			generic_handle_irq(irq);
+			pos++;
 		}
 	}
 
···
 	}
 
 	if (!pci->dbi_base) {
-		pci->dbi_base = devm_ioremap(dev, pp->cfg->start,
-					resource_size(pp->cfg));
+		pci->dbi_base = devm_pci_remap_cfgspace(dev,
+						pp->cfg->start,
+						resource_size(pp->cfg));
 		if (!pci->dbi_base) {
 			dev_err(dev, "error with ioremap\n");
 			ret = -ENOMEM;
···
 	pp->mem_base = pp->mem->start;
 
 	if (!pp->va_cfg0_base) {
-		pp->va_cfg0_base = devm_ioremap(dev, pp->cfg0_base,
-						pp->cfg0_size);
+		pp->va_cfg0_base = devm_pci_remap_cfgspace(dev,
+					pp->cfg0_base, pp->cfg0_size);
 		if (!pp->va_cfg0_base) {
 			dev_err(dev, "error with ioremap in function\n");
 			ret = -ENOMEM;
···
 	}
 
 	if (!pp->va_cfg1_base) {
-		pp->va_cfg1_base = devm_ioremap(dev, pp->cfg1_base,
+		pp->va_cfg1_base = devm_pci_remap_cfgspace(dev,
+						pp->cfg1_base,
 						pp->cfg1_size);
 		if (!pp->va_cfg1_base) {
 			dev_err(dev, "error with ioremap\n");

drivers/pci/dwc/pcie-designware-plat.c

···
 	.driver = {
 		.name	= "dw-pcie",
 		.of_match_table = dw_plat_pcie_of_match,
+		.suppress_bind_attrs = true,
 	},
 	.probe = dw_plat_pcie_probe,
 };

drivers/pci/dwc/pcie-designware.c

···
 	return PCIBIOS_SUCCESSFUL;
 }
 
-u32 dw_pcie_readl_dbi(struct dw_pcie *pci, u32 reg)
+u32 __dw_pcie_read_dbi(struct dw_pcie *pci, void __iomem *base, u32 reg,
+		       size_t size)
 {
-	if (pci->ops->readl_dbi)
-		return pci->ops->readl_dbi(pci, reg);
+	int ret;
+	u32 val;
 
-	return readl(pci->dbi_base + reg);
+	if (pci->ops->read_dbi)
+		return pci->ops->read_dbi(pci, base, reg, size);
+
+	ret = dw_pcie_read(base + reg, size, &val);
+	if (ret)
+		dev_err(pci->dev, "read DBI address failed\n");
+
+	return val;
 }
 
-void dw_pcie_writel_dbi(struct dw_pcie *pci, u32 reg, u32 val)
+void __dw_pcie_write_dbi(struct dw_pcie *pci, void __iomem *base, u32 reg,
+			 size_t size, u32 val)
 {
-	if (pci->ops->writel_dbi)
-		pci->ops->writel_dbi(pci, reg, val);
-	else
-		writel(val, pci->dbi_base + reg);
+	int ret;
+
+	if (pci->ops->write_dbi) {
+		pci->ops->write_dbi(pci, base, reg, size, val);
+		return;
+	}
+
+	ret = dw_pcie_write(base + reg, size, val);
+	if (ret)
+		dev_err(pci->dev, "write DBI address failed\n");
 }
 
-static u32 dw_pcie_readl_unroll(struct dw_pcie *pci, u32 index, u32 reg)
+static u32 dw_pcie_readl_ob_unroll(struct dw_pcie *pci, u32 index, u32 reg)
 {
 	u32 offset = PCIE_GET_ATU_OUTB_UNR_REG_OFFSET(index);
 
 	return dw_pcie_readl_dbi(pci, offset + reg);
 }
 
-static void dw_pcie_writel_unroll(struct dw_pcie *pci, u32 index, u32 reg,
-				  u32 val)
+static void dw_pcie_writel_ob_unroll(struct dw_pcie *pci, u32 index, u32 reg,
+				     u32 val)
 {
 	u32 offset = PCIE_GET_ATU_OUTB_UNR_REG_OFFSET(index);
 
 	dw_pcie_writel_dbi(pci, offset + reg, val);
+}
+
+void dw_pcie_prog_outbound_atu_unroll(struct dw_pcie *pci, int index, int type,
+				      u64 cpu_addr, u64 pci_addr, u32 size)
+{
+	u32 retries, val;
+
+	dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_LOWER_BASE,
+				 lower_32_bits(cpu_addr));
+	dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_UPPER_BASE,
+				 upper_32_bits(cpu_addr));
+	dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_LIMIT,
+				 lower_32_bits(cpu_addr + size - 1));
+	dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_LOWER_TARGET,
+				 lower_32_bits(pci_addr));
+	dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_UPPER_TARGET,
+				 upper_32_bits(pci_addr));
+	dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_REGION_CTRL1,
+				 type);
+	dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_REGION_CTRL2,
+				 PCIE_ATU_ENABLE);
+
+	/*
+	 * Make sure ATU enable takes effect before any subsequent config
+	 * and I/O accesses.
+	 */
+	for (retries = 0; retries < LINK_WAIT_MAX_IATU_RETRIES; retries++) {
+		val = dw_pcie_readl_ob_unroll(pci, index,
+					      PCIE_ATU_UNR_REGION_CTRL2);
+		if (val & PCIE_ATU_ENABLE)
+			return;
+
+		usleep_range(LINK_WAIT_IATU_MIN, LINK_WAIT_IATU_MAX);
+	}
+	dev_err(pci->dev, "outbound iATU is not being enabled\n");
 }
 
 void dw_pcie_prog_outbound_atu(struct dw_pcie *pci, int index, int type,
···
 {
 	u32 retries, val;
 
+	if (pci->ops->cpu_addr_fixup)
+		cpu_addr = pci->ops->cpu_addr_fixup(cpu_addr);
+
 	if (pci->iatu_unroll_enabled) {
-		dw_pcie_writel_unroll(pci, index, PCIE_ATU_UNR_LOWER_BASE,
-				      lower_32_bits(cpu_addr));
-		dw_pcie_writel_unroll(pci, index, PCIE_ATU_UNR_UPPER_BASE,
-				      upper_32_bits(cpu_addr));
-		dw_pcie_writel_unroll(pci, index, PCIE_ATU_UNR_LIMIT,
-				      lower_32_bits(cpu_addr + size - 1));
-		dw_pcie_writel_unroll(pci, index, PCIE_ATU_UNR_LOWER_TARGET,
-				      lower_32_bits(pci_addr));
-		dw_pcie_writel_unroll(pci, index, PCIE_ATU_UNR_UPPER_TARGET,
-				      upper_32_bits(pci_addr));
-		dw_pcie_writel_unroll(pci, index, PCIE_ATU_UNR_REGION_CTRL1,
-				      type);
-		dw_pcie_writel_unroll(pci, index, PCIE_ATU_UNR_REGION_CTRL2,
-				      PCIE_ATU_ENABLE);
-	} else {
-		dw_pcie_writel_dbi(pci, PCIE_ATU_VIEWPORT,
-				   PCIE_ATU_REGION_OUTBOUND | index);
-		dw_pcie_writel_dbi(pci, PCIE_ATU_LOWER_BASE,
-				   lower_32_bits(cpu_addr));
-		dw_pcie_writel_dbi(pci, PCIE_ATU_UPPER_BASE,
-				   upper_32_bits(cpu_addr));
-		dw_pcie_writel_dbi(pci, PCIE_ATU_LIMIT,
-				   lower_32_bits(cpu_addr + size - 1));
-		dw_pcie_writel_dbi(pci, PCIE_ATU_LOWER_TARGET,
-				   lower_32_bits(pci_addr));
-		dw_pcie_writel_dbi(pci, PCIE_ATU_UPPER_TARGET,
-				   upper_32_bits(pci_addr));
-		dw_pcie_writel_dbi(pci, PCIE_ATU_CR1, type);
-		dw_pcie_writel_dbi(pci, PCIE_ATU_CR2, PCIE_ATU_ENABLE);
+		dw_pcie_prog_outbound_atu_unroll(pci, index, type, cpu_addr,
+						 pci_addr, size);
+		return;
 	}
+
+	dw_pcie_writel_dbi(pci, PCIE_ATU_VIEWPORT,
+			   PCIE_ATU_REGION_OUTBOUND | index);
+	dw_pcie_writel_dbi(pci, PCIE_ATU_LOWER_BASE,
+			   lower_32_bits(cpu_addr));
+	dw_pcie_writel_dbi(pci, PCIE_ATU_UPPER_BASE,
+			   upper_32_bits(cpu_addr));
+	dw_pcie_writel_dbi(pci, PCIE_ATU_LIMIT,
+			   lower_32_bits(cpu_addr + size - 1));
+	dw_pcie_writel_dbi(pci, PCIE_ATU_LOWER_TARGET,
+			   lower_32_bits(pci_addr));
+	dw_pcie_writel_dbi(pci, PCIE_ATU_UPPER_TARGET,
+			   upper_32_bits(pci_addr));
+	dw_pcie_writel_dbi(pci, PCIE_ATU_CR1, type);
+	dw_pcie_writel_dbi(pci, PCIE_ATU_CR2, PCIE_ATU_ENABLE);
 
 	/*
 	 * Make sure ATU enable takes effect before any subsequent config
 	 * and I/O accesses.
 	 */
 	for (retries = 0; retries < LINK_WAIT_MAX_IATU_RETRIES; retries++) {
-		if (pci->iatu_unroll_enabled)
-			val = dw_pcie_readl_unroll(pci, index,
-						   PCIE_ATU_UNR_REGION_CTRL2);
-		else
-			val = dw_pcie_readl_dbi(pci, PCIE_ATU_CR2);
-
+		val = dw_pcie_readl_dbi(pci, PCIE_ATU_CR2);
 		if (val == PCIE_ATU_ENABLE)
 			return;
 
 		usleep_range(LINK_WAIT_IATU_MIN, LINK_WAIT_IATU_MAX);
 	}
-	dev_err(pci->dev, "iATU is not being enabled\n");
+	dev_err(pci->dev, "outbound iATU is not being enabled\n");
+}
+
+static u32 dw_pcie_readl_ib_unroll(struct dw_pcie *pci, u32 index, u32 reg)
+{
+	u32 offset = PCIE_GET_ATU_INB_UNR_REG_OFFSET(index);
+
+	return dw_pcie_readl_dbi(pci, offset + reg);
+}
+
+static void dw_pcie_writel_ib_unroll(struct dw_pcie *pci, u32 index, u32 reg,
+				     u32 val)
+{
+	u32 offset = PCIE_GET_ATU_INB_UNR_REG_OFFSET(index);
+
+	dw_pcie_writel_dbi(pci, offset + reg, val);
+}
+
+int dw_pcie_prog_inbound_atu_unroll(struct dw_pcie *pci, int index, int bar,
+				    u64 cpu_addr, enum dw_pcie_as_type as_type)
+{
+	int type;
+	u32 retries, val;
+
+	dw_pcie_writel_ib_unroll(pci, index, PCIE_ATU_UNR_LOWER_TARGET,
+				 lower_32_bits(cpu_addr));
+	dw_pcie_writel_ib_unroll(pci, index, PCIE_ATU_UNR_UPPER_TARGET,
+				 upper_32_bits(cpu_addr));
+
+	switch (as_type) {
+	case DW_PCIE_AS_MEM:
+		type = PCIE_ATU_TYPE_MEM;
+		break;
+	case DW_PCIE_AS_IO:
+		type = PCIE_ATU_TYPE_IO;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	dw_pcie_writel_ib_unroll(pci, index, PCIE_ATU_UNR_REGION_CTRL1, type);
+	dw_pcie_writel_ib_unroll(pci, index, PCIE_ATU_UNR_REGION_CTRL2,
+				 PCIE_ATU_ENABLE |
+				 PCIE_ATU_BAR_MODE_ENABLE | (bar << 8));
+
+	/*
+	 * Make sure ATU enable takes effect before any subsequent config
+	 * and I/O accesses.
+	 */
+	for (retries = 0; retries < LINK_WAIT_MAX_IATU_RETRIES; retries++) {
+		val = dw_pcie_readl_ib_unroll(pci, index,
+					      PCIE_ATU_UNR_REGION_CTRL2);
+		if (val & PCIE_ATU_ENABLE)
+			return 0;
+
+		usleep_range(LINK_WAIT_IATU_MIN, LINK_WAIT_IATU_MAX);
+	}
+	dev_err(pci->dev, "inbound iATU is not being enabled\n");
+
+	return -EBUSY;
+}
+
+int dw_pcie_prog_inbound_atu(struct dw_pcie *pci, int index, int bar,
+			     u64 cpu_addr, enum dw_pcie_as_type as_type)
+{
+	int type;
+	u32 retries, val;
+
+	if (pci->iatu_unroll_enabled)
+		return dw_pcie_prog_inbound_atu_unroll(pci, index, bar,
+						       cpu_addr, as_type);
+
+	dw_pcie_writel_dbi(pci, PCIE_ATU_VIEWPORT, PCIE_ATU_REGION_INBOUND |
+			   index);
+	dw_pcie_writel_dbi(pci, PCIE_ATU_LOWER_TARGET, lower_32_bits(cpu_addr));
+	dw_pcie_writel_dbi(pci, PCIE_ATU_UPPER_TARGET, upper_32_bits(cpu_addr));
+
+	switch (as_type) {
+	case DW_PCIE_AS_MEM:
+		type = PCIE_ATU_TYPE_MEM;
+		break;
+	case DW_PCIE_AS_IO:
+		type = PCIE_ATU_TYPE_IO;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	dw_pcie_writel_dbi(pci, PCIE_ATU_CR1, type);
+	dw_pcie_writel_dbi(pci, PCIE_ATU_CR2, PCIE_ATU_ENABLE
+			   | PCIE_ATU_BAR_MODE_ENABLE | (bar << 8));
+
+	/*
+	 * Make sure ATU enable takes effect before any subsequent config
+	 * and I/O accesses.
+	 */
+	for (retries = 0; retries < LINK_WAIT_MAX_IATU_RETRIES; retries++) {
+		val = dw_pcie_readl_dbi(pci, PCIE_ATU_CR2);
+		if (val & PCIE_ATU_ENABLE)
+			return 0;
+
+		usleep_range(LINK_WAIT_IATU_MIN, LINK_WAIT_IATU_MAX);
+	}
+	dev_err(pci->dev, "inbound iATU is not being enabled\n");
+
+	return -EBUSY;
+}
+
+void dw_pcie_disable_atu(struct dw_pcie *pci, int index,
+			 enum dw_pcie_region_type type)
+{
+	int region;
+
+	switch (type) {
+	case DW_PCIE_REGION_INBOUND:
+		region = PCIE_ATU_REGION_INBOUND;
+		break;
+	case DW_PCIE_REGION_OUTBOUND:
+		region = PCIE_ATU_REGION_OUTBOUND;
+		break;
+	default:
+		return;
+	}
+
+	dw_pcie_writel_dbi(pci, PCIE_ATU_VIEWPORT, region | index);
+	dw_pcie_writel_dbi(pci, PCIE_ATU_CR2, ~PCIE_ATU_ENABLE);
 }
 
 int dw_pcie_wait_for_link(struct dw_pcie *pci)

drivers/pci/dwc/pcie-designware.h

···
 #include <linux/msi.h>
 #include <linux/pci.h>
 
+#include <linux/pci-epc.h>
+#include <linux/pci-epf.h>
+
 /* Parameters for the waiting for link up routine */
 #define LINK_WAIT_MAX_RETRIES		10
 #define LINK_WAIT_USLEEP_MIN		90000
···
 #define PCIE_GET_ATU_OUTB_UNR_REG_OFFSET(region)	\
 			((0x3 << 20) | ((region) << 9))
 
+#define PCIE_GET_ATU_INB_UNR_REG_OFFSET(region)				\
+			((0x3 << 20) | ((region) << 9) | (0x1 << 8))
+
+#define MSI_MESSAGE_CONTROL		0x52
+#define MSI_CAP_MMC_SHIFT		1
+#define MSI_CAP_MME_SHIFT		4
+#define MSI_CAP_MME_MASK		(7 << MSI_CAP_MME_SHIFT)
+#define MSI_MESSAGE_ADDR_L32		0x54
+#define MSI_MESSAGE_ADDR_U32		0x58
+
 /*
  * Maximum number of MSI IRQs can be 256 per controller. But keep
  * it 32 as of now. Probably we will never need more than 32. If needed,
···
 
 struct pcie_port;
 struct dw_pcie;
+struct dw_pcie_ep;
+
+enum dw_pcie_region_type {
+	DW_PCIE_REGION_UNKNOWN,
+	DW_PCIE_REGION_INBOUND,
+	DW_PCIE_REGION_OUTBOUND,
+};
+
+enum dw_pcie_device_mode {
+	DW_PCIE_UNKNOWN_TYPE,
+	DW_PCIE_EP_TYPE,
+	DW_PCIE_LEG_EP_TYPE,
+	DW_PCIE_RC_TYPE,
+};
 
 struct dw_pcie_host_ops {
 	int (*rd_own_conf)(struct pcie_port *pp, int where, int size, u32 *val);
···
 	DECLARE_BITMAP(msi_irq_in_use, MAX_MSI_IRQS);
 };
 
+enum dw_pcie_as_type {
+	DW_PCIE_AS_UNKNOWN,
+	DW_PCIE_AS_MEM,
+	DW_PCIE_AS_IO,
+};
+
+struct dw_pcie_ep_ops {
+	void	(*ep_init)(struct dw_pcie_ep *ep);
+	int	(*raise_irq)(struct dw_pcie_ep *ep, enum pci_epc_irq_type type,
+			     u8 interrupt_num);
+};
+
+struct dw_pcie_ep {
+	struct pci_epc		*epc;
+	struct dw_pcie_ep_ops	*ops;
+	phys_addr_t		phys_base;
+	size_t			addr_size;
+	u8			bar_to_atu[6];
+	phys_addr_t		*outbound_addr;
+	unsigned long		ib_window_map;
+	unsigned long		ob_window_map;
+	u32			num_ib_windows;
+	u32			num_ob_windows;
+};
+
 struct dw_pcie_ops {
-	u32	(*readl_dbi)(struct dw_pcie *pcie, u32 reg);
-	void	(*writel_dbi)(struct dw_pcie *pcie, u32 reg, u32 val);
+	u64	(*cpu_addr_fixup)(u64 cpu_addr);
+	u32	(*read_dbi)(struct dw_pcie *pcie, void __iomem *base, u32 reg,
+			    size_t size);
+	void	(*write_dbi)(struct dw_pcie *pcie, void __iomem *base, u32 reg,
+			     size_t size, u32 val);
 	int	(*link_up)(struct dw_pcie *pcie);
+	int	(*start_link)(struct dw_pcie *pcie);
+	void	(*stop_link)(struct dw_pcie *pcie);
 };
 
 struct dw_pcie {
 	struct device		*dev;
 	void __iomem		*dbi_base;
+	void __iomem		*dbi_base2;
 	u32			num_viewport;
 	u8			iatu_unroll_enabled;
 	struct pcie_port	pp;
+	struct dw_pcie_ep	ep;
 	const struct dw_pcie_ops *ops;
 };
 
 #define to_dw_pcie_from_pp(port) container_of((port), struct dw_pcie, pp)
 
+#define to_dw_pcie_from_ep(endpoint)   \
+		container_of((endpoint), struct dw_pcie, ep)
+
 int dw_pcie_read(void __iomem *addr, int size, u32 *val);
 int dw_pcie_write(void __iomem *addr, int size, u32 val);
 
-u32 dw_pcie_readl_dbi(struct dw_pcie *pci, u32 reg);
-void dw_pcie_writel_dbi(struct dw_pcie *pci, u32 reg, u32 val);
+u32 __dw_pcie_read_dbi(struct dw_pcie *pci, void __iomem *base, u32 reg,
+		       size_t size);
+void __dw_pcie_write_dbi(struct dw_pcie *pci, void __iomem *base, u32 reg,
+			 size_t size, u32 val);
 int dw_pcie_link_up(struct dw_pcie *pci);
 int dw_pcie_wait_for_link(struct dw_pcie *pci);
 void dw_pcie_prog_outbound_atu(struct dw_pcie *pci, int index,
 			       int type, u64 cpu_addr, u64 pci_addr,
 			       u32 size);
+int dw_pcie_prog_inbound_atu(struct dw_pcie *pci, int index, int bar,
+			     u64 cpu_addr, enum dw_pcie_as_type as_type);
+void dw_pcie_disable_atu(struct dw_pcie *pci, int index,
+			 enum dw_pcie_region_type type);
 void dw_pcie_setup(struct dw_pcie *pci);
+
+static inline void dw_pcie_writel_dbi(struct dw_pcie *pci, u32 reg, u32 val)
+{
+	__dw_pcie_write_dbi(pci, pci->dbi_base, reg, 0x4, val);
+}
+
+static inline u32 dw_pcie_readl_dbi(struct dw_pcie *pci, u32 reg)
+{
+	return __dw_pcie_read_dbi(pci, pci->dbi_base, reg, 0x4);
+}
+
+static inline void dw_pcie_writew_dbi(struct dw_pcie *pci, u32 reg, u16 val)
+{
+	__dw_pcie_write_dbi(pci, pci->dbi_base, reg, 0x2, val);
+}
+
+static inline u16 dw_pcie_readw_dbi(struct dw_pcie *pci, u32 reg)
+{
+	return __dw_pcie_read_dbi(pci, pci->dbi_base, reg, 0x2);
+}
+
+static inline void dw_pcie_writeb_dbi(struct dw_pcie *pci, u32 reg, u8 val)
+{
+	__dw_pcie_write_dbi(pci, pci->dbi_base, reg, 0x1, val);
+}
+
+static inline u8 dw_pcie_readb_dbi(struct dw_pcie *pci, u32 reg)
+{
+	return __dw_pcie_read_dbi(pci, pci->dbi_base, reg, 0x1);
+}
+
+static inline void dw_pcie_writel_dbi2(struct dw_pcie *pci, u32 reg, u32 val)
+{
+	__dw_pcie_write_dbi(pci, pci->dbi_base2, reg, 0x4, val);
+}
+
+static inline u32 dw_pcie_readl_dbi2(struct dw_pcie *pci, u32 reg)
+{
+	return __dw_pcie_read_dbi(pci, pci->dbi_base2, reg, 0x4);
+}
 
 #ifdef CONFIG_PCIE_DW_HOST
 irqreturn_t dw_handle_msi_irq(struct pcie_port *pp);
···
 static inline int dw_pcie_host_init(struct pcie_port *pp)
 {
 	return 0;
+}
+#endif
+
+#ifdef CONFIG_PCIE_DW_EP
+void dw_pcie_ep_linkup(struct dw_pcie_ep *ep);
+int dw_pcie_ep_init(struct dw_pcie_ep *ep);
+void dw_pcie_ep_exit(struct dw_pcie_ep *ep);
+#else
+static inline void dw_pcie_ep_linkup(struct dw_pcie_ep *ep)
+{
+}
+
+static inline int dw_pcie_ep_init(struct dw_pcie_ep *ep)
+{
+	return 0;
+}
+
+static inline void dw_pcie_ep_exit(struct dw_pcie_ep *ep)
+{
 }
 #endif
 #endif /* _PCIE_DESIGNWARE_H */

drivers/pci/dwc/pcie-hisi.c

···
 		return -ENOMEM;
 	}
 
-	reg_base = devm_ioremap(dev, res->start, resource_size(res));
+	reg_base = devm_pci_remap_cfgspace(dev, res->start, resource_size(res));
 	if (!reg_base)
 		return -ENOMEM;
 
···
 	}
 
 	reg = platform_get_resource_byname(pdev, IORESOURCE_MEM, "rc_dbi");
-	pci->dbi_base = devm_ioremap_resource(dev, reg);
+	pci->dbi_base = devm_pci_remap_cfg_resource(dev, reg);
 	if (IS_ERR(pci->dbi_base))
 		return PTR_ERR(pci->dbi_base);
-
 	platform_set_drvdata(pdev, hisi_pcie);
 
 	ret = hisi_add_pcie_port(hisi_pcie, pdev);
···
 	.driver = {
 		   .name = "hisi-pcie",
 		   .of_match_table = hisi_pcie_of_match,
+		   .suppress_bind_attrs = true,
 	},
 };
 builtin_platform_driver(hisi_pcie_driver);
···
 		return -EINVAL;
 	}
 
-	reg_base = devm_ioremap(dev, res->start, resource_size(res));
+	reg_base = devm_pci_remap_cfgspace(dev, res->start, resource_size(res));
 	if (!reg_base)
 		return -ENOMEM;
 
···
 	.driver = {
 		   .name = "hisi-pcie-almost-ecam",
 		   .of_match_table = hisi_pcie_almost_ecam_of_match,
+		   .suppress_bind_attrs = true,
 	},
 };
 builtin_platform_driver(hisi_pcie_almost_ecam_driver);

drivers/pci/dwc/pcie-qcom.c

···
 		return PTR_ERR(pcie->parf);
 
 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dbi");
-	pci->dbi_base = devm_ioremap_resource(dev, res);
+	pci->dbi_base = devm_pci_remap_cfg_resource(dev, res);
 	if (IS_ERR(pci->dbi_base))
 		return PTR_ERR(pci->dbi_base);
 

drivers/pci/dwc/pcie-spear13xx.c

···
 	}
 
 	dbi_base = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dbi");
-	pci->dbi_base = devm_ioremap_resource(dev, dbi_base);
+	pci->dbi_base = devm_pci_remap_cfg_resource(dev, dbi_base);
 	if (IS_ERR(pci->dbi_base)) {
 		dev_err(dev, "couldn't remap dbi base %p\n", dbi_base);
 		ret = PTR_ERR(pci->dbi_base);
···
 	.driver = {
 		.name	= "spear-pcie",
 		.of_match_table = of_match_ptr(spear13xx_pcie_of_match),
+		.suppress_bind_attrs = true,
 	},
 };
 

drivers/pci/ecam.c

···
 		if (!cfg->winp)
 			goto err_exit_malloc;
 		for (i = 0; i < bus_range; i++) {
-			cfg->winp[i] = ioremap(cfgres->start + i * bsz, bsz);
+			cfg->winp[i] =
+				pci_remap_cfgspace(cfgres->start + i * bsz,
+						   bsz);
 			if (!cfg->winp[i])
 				goto err_exit_iomap;
 		}
 	} else {
-		cfg->win = ioremap(cfgres->start, bus_range * bsz);
+		cfg->win = pci_remap_cfgspace(cfgres->start, bus_range * bsz);
 		if (!cfg->win)
 			goto err_exit_iomap;
 	}

drivers/pci/endpoint/Kconfig

···
+#
+# PCI Endpoint Support
+#
+
+menu "PCI Endpoint"
+
+config PCI_ENDPOINT
+	bool "PCI Endpoint Support"
+	help
+	   Enable this configuration option to support configurable PCI
+	   endpoint. This should be enabled if the platform has a PCI
+	   controller that can operate in endpoint mode.
+
+	   Enabling this option will build the endpoint library, which
+	   includes endpoint controller library and endpoint function
+	   library.
+
+	   If in doubt, say "N" to disable Endpoint support.
+
+config PCI_ENDPOINT_CONFIGFS
+	bool "PCI Endpoint Configfs Support"
+	depends on PCI_ENDPOINT
+	select CONFIGFS_FS
+	help
+	   This will enable the configfs entry that can be used to
+	   configure the endpoint function and used to bind the
+	   function with a endpoint controller.
+
+source "drivers/pci/endpoint/functions/Kconfig"
+
+endmenu

drivers/pci/endpoint/Makefile

···
+#
+# Makefile for PCI Endpoint Support
+#
+
+obj-$(CONFIG_PCI_ENDPOINT_CONFIGFS)	+= pci-ep-cfs.o
+obj-$(CONFIG_PCI_ENDPOINT)		+= pci-epc-core.o pci-epf-core.o\
+					   pci-epc-mem.o functions/

drivers/pci/endpoint/functions/Kconfig

···
+#
+# PCI Endpoint Functions
+#
+
+config PCI_EPF_TEST
+	tristate "PCI Endpoint Test driver"
+	depends on PCI_ENDPOINT
+	help
+	   Enable this configuration option to enable the test driver
+	   for PCI Endpoint.
+
+	   If in doubt, say "N" to disable Endpoint test driver.

drivers/pci/endpoint/functions/Makefile

···
+#
+# Makefile for PCI Endpoint Functions
+#
+
+obj-$(CONFIG_PCI_EPF_TEST)		+= pci-epf-test.o

drivers/pci/endpoint/functions/pci-epf-test.c

···
+/**
+ * Test driver to test endpoint functionality
+ *
+ * Copyright (C) 2017 Texas Instruments
+ * Author: Kishon Vijay Abraham I <[e-mail]>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 of
+ * the License as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/crc32.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/pci_ids.h>
+#include <linux/random.h>
+
+#include <linux/pci-epc.h>
+#include <linux/pci-epf.h>
+#include <linux/pci_regs.h>
+
+#define COMMAND_RAISE_LEGACY_IRQ	BIT(0)
+#define COMMAND_RAISE_MSI_IRQ		BIT(1)
+#define MSI_NUMBER_SHIFT		2
+#define MSI_NUMBER_MASK			(0x3f << MSI_NUMBER_SHIFT)
+#define COMMAND_READ			BIT(8)
+#define COMMAND_WRITE			BIT(9)
+#define COMMAND_COPY			BIT(10)
+
+#define STATUS_READ_SUCCESS		BIT(0)
+#define STATUS_READ_FAIL		BIT(1)
+#define STATUS_WRITE_SUCCESS		BIT(2)
+#define STATUS_WRITE_FAIL		BIT(3)
+#define STATUS_COPY_SUCCESS		BIT(4)
+#define STATUS_COPY_FAIL		BIT(5)
+#define STATUS_IRQ_RAISED		BIT(6)
+#define STATUS_SRC_ADDR_INVALID		BIT(7)
+#define STATUS_DST_ADDR_INVALID		BIT(8)
+
+#define TIMER_RESOLUTION		1
+
+static struct workqueue_struct *kpcitest_workqueue;
+
+struct pci_epf_test {
+	void			*reg[6];
+	struct pci_epf		*epf;
+	struct delayed_work	cmd_handler;
+};
+
+struct pci_epf_test_reg {
+	u32	magic;
+	u32	command;
+	u32	status;
+	u64	src_addr;
+	u64	dst_addr;
+	u32	size;
+	u32	checksum;
+} __packed;
+
+static struct pci_epf_header test_header = {
+	.vendorid	= PCI_ANY_ID,
+	.deviceid	= PCI_ANY_ID,
+	.baseclass_code = PCI_CLASS_OTHERS,
+	.interrupt_pin	= PCI_INTERRUPT_INTA,
+};
+
+static int bar_size[] = { 512, 1024, 16384, 131072, 1048576 };
+
+static int pci_epf_test_copy(struct pci_epf_test *epf_test)
+{
+	int ret;
+	void __iomem *src_addr;
+	void __iomem *dst_addr;
+	phys_addr_t src_phys_addr;
+	phys_addr_t dst_phys_addr;
+	struct pci_epf *epf = epf_test->epf;
+	struct device *dev = &epf->dev;
+	struct pci_epc *epc = epf->epc;
+	struct pci_epf_test_reg *reg = epf_test->reg[0];
+
+	src_addr = pci_epc_mem_alloc_addr(epc, &src_phys_addr, reg->size);
+	if (!src_addr) {
+		dev_err(dev, "failed to allocate source address\n");
+		reg->status = STATUS_SRC_ADDR_INVALID;
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	ret = pci_epc_map_addr(epc, src_phys_addr, reg->src_addr, reg->size);
+	if (ret) {
+		dev_err(dev, "failed to map source address\n");
+		reg->status = STATUS_SRC_ADDR_INVALID;
+		goto err_src_addr;
+	}
+
+	dst_addr = pci_epc_mem_alloc_addr(epc, &dst_phys_addr, reg->size);
+	if (!dst_addr) {
+		dev_err(dev, "failed to allocate destination address\n");
+		reg->status = STATUS_DST_ADDR_INVALID;
+		ret = -ENOMEM;
+		goto err_src_map_addr;
+	}
+
+	ret = pci_epc_map_addr(epc, dst_phys_addr, reg->dst_addr, reg->size);
+	if (ret) {
+		dev_err(dev, "failed to map destination address\n");
+		reg->status = STATUS_DST_ADDR_INVALID;
+		goto err_dst_addr;
+	}
+
+	memcpy(dst_addr, src_addr, reg->size);
+
+	pci_epc_unmap_addr(epc, dst_phys_addr);
+
+err_dst_addr:
+	pci_epc_mem_free_addr(epc, dst_phys_addr, dst_addr, reg->size);
+
+err_src_map_addr:
+	pci_epc_unmap_addr(epc, src_phys_addr);
+
+err_src_addr:
+	pci_epc_mem_free_addr(epc, src_phys_addr, src_addr, reg->size);
+
+err:
+	return ret;
+}
+
+static int pci_epf_test_read(struct pci_epf_test *epf_test)
+{
+	int ret;
+	void __iomem *src_addr;
+	void *buf;
+	u32 crc32;
+	phys_addr_t phys_addr;
+	struct pci_epf *epf = epf_test->epf;
+	struct device *dev = &epf->dev;
+	struct pci_epc *epc = epf->epc;
+	struct pci_epf_test_reg *reg = epf_test->reg[0];
+
+	src_addr = pci_epc_mem_alloc_addr(epc, &phys_addr, reg->size);
+	if (!src_addr) {
+		dev_err(dev, "failed to allocate address\n");
+		reg->status = STATUS_SRC_ADDR_INVALID;
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	ret = pci_epc_map_addr(epc, phys_addr, reg->src_addr, reg->size);
+	if (ret) {
+		dev_err(dev, "failed to map address\n");
+		reg->status = STATUS_SRC_ADDR_INVALID;
+		goto err_addr;
+	}
+
+	buf = kzalloc(reg->size, GFP_KERNEL);
+	if (!buf) {
+		ret = -ENOMEM;
+		goto err_map_addr;
+	}
+
+	memcpy(buf, src_addr, reg->size);
+
+	crc32 = crc32_le(~0, buf, reg->size);
+	if (crc32 != reg->checksum)
+		ret = -EIO;
+
+	kfree(buf);
+
+err_map_addr:
+	pci_epc_unmap_addr(epc, phys_addr);
+
+err_addr:
+	pci_epc_mem_free_addr(epc, phys_addr, src_addr, reg->size);
+
+err:
+	return ret;
+}
+
+static int pci_epf_test_write(struct pci_epf_test *epf_test)
+{
+	int ret;
+	void __iomem *dst_addr;
+	void *buf;
+	phys_addr_t phys_addr;
+	struct pci_epf *epf = epf_test->epf;
+	struct device *dev = &epf->dev;
+	struct pci_epc *epc = epf->epc;
+	struct pci_epf_test_reg *reg = epf_test->reg[0];
+
+	dst_addr = pci_epc_mem_alloc_addr(epc, &phys_addr, reg->size);
+	if (!dst_addr) {
+		dev_err(dev, "failed to allocate address\n");
+		reg->status = STATUS_DST_ADDR_INVALID;
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	ret = pci_epc_map_addr(epc, phys_addr, reg->dst_addr, reg->size);
+	if (ret) {
+		dev_err(dev, "failed to map address\n");
+		reg->status = STATUS_DST_ADDR_INVALID;
+		goto err_addr;
+	}
+
+	buf = kzalloc(reg->size, GFP_KERNEL);
+	if (!buf) {
+		ret = -ENOMEM;
+		goto err_map_addr;
+	}
+
+	get_random_bytes(buf, reg->size);
+	reg->checksum = crc32_le(~0, buf, reg->size);
+
+	memcpy(dst_addr, buf, reg->size);
+
+	/*
+	 * wait 1ms inorder for the write to complete. Without this delay L3
+	 * error in observed in the host system.
+	 */
+	mdelay(1);
+
+	kfree(buf);
+
+err_map_addr:
+	pci_epc_unmap_addr(epc, phys_addr);
+
+err_addr:
+	pci_epc_mem_free_addr(epc, phys_addr, dst_addr, reg->size);
+
+err:
+	return ret;
+}
+
+static void pci_epf_test_raise_irq(struct pci_epf_test *epf_test)
+{
+	u8 irq;
+	u8 msi_count;
+	struct pci_epf *epf = epf_test->epf;
+	struct pci_epc *epc = epf->epc;
+	struct pci_epf_test_reg *reg = epf_test->reg[0];
+
+	reg->status |= STATUS_IRQ_RAISED;
+	msi_count = pci_epc_get_msi(epc);
+	irq = (reg->command & MSI_NUMBER_MASK) >> MSI_NUMBER_SHIFT;
+	if (irq > msi_count || msi_count <= 0)
+		pci_epc_raise_irq(epc, PCI_EPC_IRQ_LEGACY, 0);
+	else
+		pci_epc_raise_irq(epc, PCI_EPC_IRQ_MSI, irq);
+}
+
+static void pci_epf_test_cmd_handler(struct work_struct *work)
+{
+	int ret;
+	u8 irq;
+	u8 msi_count;
+	struct pci_epf_test *epf_test = container_of(work, struct pci_epf_test,
+						     cmd_handler.work);
+	struct pci_epf *epf = epf_test->epf;
+	struct pci_epc *epc = epf->epc;
+	struct pci_epf_test_reg *reg = epf_test->reg[0];
+
+	if (!reg->command)
+		goto reset_handler;
+
+	if (reg->command & COMMAND_RAISE_LEGACY_IRQ) {
+		reg->status = STATUS_IRQ_RAISED;
+		pci_epc_raise_irq(epc, PCI_EPC_IRQ_LEGACY, 0);
+		goto reset_handler;
+	}
+
+	if (reg->command & COMMAND_WRITE) {
+		ret = pci_epf_test_write(epf_test);
+		if (ret)
+			reg->status |= STATUS_WRITE_FAIL;
+		else
+			reg->status |= STATUS_WRITE_SUCCESS;
+		pci_epf_test_raise_irq(epf_test);
+		goto reset_handler;
+	}
+
+	if (reg->command & COMMAND_READ) {
+		ret = pci_epf_test_read(epf_test);
+		if (!ret)
+			reg->status |= STATUS_READ_SUCCESS;
+		else
+			reg->status |= STATUS_READ_FAIL;
+		pci_epf_test_raise_irq(epf_test);
+		goto reset_handler;
+	}
+
+	if (reg->command & COMMAND_COPY) {
+		ret = pci_epf_test_copy(epf_test);
+		if (!ret)
+			reg->status |= STATUS_COPY_SUCCESS;
+		else
+			reg->status |= STATUS_COPY_FAIL;
+		pci_epf_test_raise_irq(epf_test);
+		goto reset_handler;
+	}
+
+	if (reg->command & COMMAND_RAISE_MSI_IRQ) {
+		msi_count = pci_epc_get_msi(epc);
+		irq = (reg->command & MSI_NUMBER_MASK) >> MSI_NUMBER_SHIFT;
+		if (irq > msi_count || msi_count <= 0)
+			goto reset_handler;
+		reg->status = STATUS_IRQ_RAISED;
+		pci_epc_raise_irq(epc, PCI_EPC_IRQ_MSI, irq);
+		goto reset_handler;
+	}
+
+reset_handler:
+	reg->command = 0;
+
+	queue_delayed_work(kpcitest_workqueue, &epf_test->cmd_handler,
+			   msecs_to_jiffies(1));
+}
+
+static void pci_epf_test_linkup(struct pci_epf *epf)
+{
+	struct pci_epf_test *epf_test = epf_get_drvdata(epf);
+
+	queue_delayed_work(kpcitest_workqueue, &epf_test->cmd_handler,
+			   msecs_to_jiffies(1));
+}
+
+static void pci_epf_test_unbind(struct pci_epf *epf)
+{
+	struct pci_epf_test *epf_test = epf_get_drvdata(epf);
+	struct pci_epc *epc = epf->epc;
+	int bar;
+
+	cancel_delayed_work(&epf_test->cmd_handler);
+	pci_epc_stop(epc);
+	for (bar = BAR_0; bar <= BAR_5; bar++) {
+		if (epf_test->reg[bar]) {
+			pci_epf_free_space(epf, epf_test->reg[bar], bar);
+			pci_epc_clear_bar(epc, bar);
+		}
+	}
+}
+
+static int pci_epf_test_set_bar(struct pci_epf *epf)
+{
+	int flags;
+	int bar;
+	int ret;
+	struct pci_epf_bar *epf_bar;
+	struct pci_epc *epc = epf->epc;
+	struct device *dev = &epf->dev;
+	struct pci_epf_test *epf_test = epf_get_drvdata(epf);
+
+	flags = PCI_BASE_ADDRESS_SPACE_MEMORY | PCI_BASE_ADDRESS_MEM_TYPE_32;
+	if (sizeof(dma_addr_t) == 0x8)
+		flags |= PCI_BASE_ADDRESS_MEM_TYPE_64;
+
+	for (bar = BAR_0; bar <= BAR_5; bar++) {
+		epf_bar = &epf->bar[bar];
+		ret = pci_epc_set_bar(epc, bar, epf_bar->phys_addr,
+				      epf_bar->size, flags);
+		if (ret) {
+			pci_epf_free_space(epf, epf_test->reg[bar], bar);
+			dev_err(dev, "failed to set BAR%d\n", bar);
+			if (bar == BAR_0)
+				return ret;
+		}
+	}
+
+	return 0;
+}
+
+static int pci_epf_test_alloc_space(struct pci_epf *epf)
+{
+	struct pci_epf_test *epf_test = epf_get_drvdata(epf);
+	struct device *dev = &epf->dev;
+	void *base;
+	int bar;
+
+	base = pci_epf_alloc_space(epf, sizeof(struct pci_epf_test_reg),
+				   BAR_0);
+	if (!base) {
+		dev_err(dev, "failed to allocated register space\n");
+		return -ENOMEM;
+	}
+	epf_test->reg[0] = base;
+
+	for (bar = BAR_1; bar <= BAR_5; bar++) {
+		base = pci_epf_alloc_space(epf, bar_size[bar - 1], bar);
+		if (!base)
+			dev_err(dev, "failed to allocate space for BAR%d\n",
+				bar);
+		epf_test->reg[bar] = base;
+	}
+
+	return 0;
+}
+
+static int pci_epf_test_bind(struct pci_epf *epf)
+{
+	int ret;
+	struct pci_epf_header *header = epf->header;
+	struct pci_epc *epc = epf->epc;
+	struct device *dev = &epf->dev;
+
+	if (WARN_ON_ONCE(!epc))
+		return -EINVAL;
+
+	ret = pci_epc_write_header(epc, header);
+	if (ret) {
+		dev_err(dev, "configuration header write failed\n");
+		return ret;
+	}
+
+	ret = pci_epf_test_alloc_space(epf);
+	if (ret)
+		return ret;
+
+	ret = pci_epf_test_set_bar(epf);
+	if (ret)
+		return ret;
+
+	ret = pci_epc_set_msi(epc, epf->msi_interrupts);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int pci_epf_test_probe(struct pci_epf *epf)
+{
+	struct pci_epf_test *epf_test;
+	struct device *dev = &epf->dev;
+
+	epf_test = devm_kzalloc(dev, sizeof(*epf_test), GFP_KERNEL);
+	if (!epf_test)
+		return -ENOMEM;
+
+	epf->header = &test_header;
+	epf_test->epf = epf;
+
+	INIT_DELAYED_WORK(&epf_test->cmd_handler, pci_epf_test_cmd_handler);
+
+	epf_set_drvdata(epf, epf_test);
+	return 0;
+}
+
+static int pci_epf_test_remove(struct pci_epf *epf)
+{
+	struct pci_epf_test *epf_test = epf_get_drvdata(epf);
+
+	kfree(epf_test);
+	return 0;
+}
+
+static struct pci_epf_ops ops = {
+	.unbind	= pci_epf_test_unbind,
+	.bind	= pci_epf_test_bind,
+	.linkup = pci_epf_test_linkup,
+};
+
+static const struct pci_epf_device_id pci_epf_test_ids[] = {
+	{
+		.name = "pci_epf_test",
+	},
+	{},
+};
+
+static struct pci_epf_driver test_driver = {
+	.driver.name	= "pci_epf_test",
+	.probe		= pci_epf_test_probe,
+	.remove		= pci_epf_test_remove,
+	.id_table	= pci_epf_test_ids,
+	.ops		= &ops,
+	.owner		= THIS_MODULE,
+};
+
+static int __init pci_epf_test_init(void)
+{
+	int ret;
+
+	kpcitest_workqueue = alloc_workqueue("kpcitest",
+					     WQ_MEM_RECLAIM | WQ_HIGHPRI, 0);
+	ret = pci_epf_register_driver(&test_driver);
+	if (ret) {
+		pr_err("failed to register pci epf test driver --> %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+module_init(pci_epf_test_init);
+
+static void __exit pci_epf_test_exit(void)
+{
+	pci_epf_unregister_driver(&test_driver);
+}
+module_exit(pci_epf_test_exit);
+
+MODULE_DESCRIPTION("PCI EPF TEST DRIVER");
+MODULE_AUTHOR("Kishon Vijay Abraham I <[e-mail]>");
+MODULE_LICENSE("GPL v2");

drivers/pci/endpoint/pci-ep-cfs.c

···
+/**
+ * configfs to configure the PCI endpoint
+ *
+ * Copyright (C) 2017 Texas Instruments
+ * Author: Kishon Vijay Abraham I <[e-mail]>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 of
+ * the License as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/module.h>
+#include <linux/slab.h>
+
+#include <linux/pci-epc.h>
+#include <linux/pci-epf.h>
+#include <linux/pci-ep-cfs.h>
+
+static struct config_group *functions_group;
+static struct config_group *controllers_group;
+
+struct pci_epf_group {
+	struct config_group group;
+	struct pci_epf *epf;
+};
+
+struct pci_epc_group {
+	struct config_group group;
+	struct pci_epc *epc;
+	bool start;
+	unsigned long function_num_map;
+};
+
+static inline struct pci_epf_group *to_pci_epf_group(struct config_item *item)
+{
+	return container_of(to_config_group(item), struct pci_epf_group, group);
+}
+
+static inline struct pci_epc_group *to_pci_epc_group(struct config_item *item)
+{
+	return container_of(to_config_group(item), struct pci_epc_group, group);
+}
+
+static ssize_t pci_epc_start_store(struct config_item *item, const char *page,
+				   size_t len)
+{
+	int ret;
+	bool start;
+	struct pci_epc *epc;
+	struct pci_epc_group *epc_group = to_pci_epc_group(item);
+
+	epc = epc_group->epc;
+
+	ret = kstrtobool(page, &start);
+	if (ret)
+		return ret;
+
+	if (!start) {
+		pci_epc_stop(epc);
+		return len;
+	}
+
+	ret = pci_epc_start(epc);
+	if (ret) {
+		dev_err(&epc->dev, "failed to start endpoint controller\n");
+		return -EINVAL;
+	}
+
+	epc_group->start = start;
+
+	return len;
+}
+
+static ssize_t pci_epc_start_show(struct config_item *item, char *page)
+{
+	return sprintf(page, "%d\n",
+		       to_pci_epc_group(item)->start);
+}
+
+CONFIGFS_ATTR(pci_epc_, start);
+
+static struct configfs_attribute *pci_epc_attrs[] = {
+	&pci_epc_attr_start,
+	NULL,
+};
+
+static int pci_epc_epf_link(struct config_item *epc_item,
+			    struct config_item *epf_item)
+{
+	int ret;
+	u32 func_no = 0;
+	struct pci_epc *epc;
+	struct pci_epf *epf;
+	struct pci_epf_group *epf_group = to_pci_epf_group(epf_item);
+	struct pci_epc_group *epc_group = to_pci_epc_group(epc_item);
+
+	epc = epc_group->epc;
+	epf = epf_group->epf;
+	ret = pci_epc_add_epf(epc, epf);
+	if (ret)
+		goto err_add_epf;
+
+	func_no = find_first_zero_bit(&epc_group->function_num_map,
+				      sizeof(epc_group->function_num_map));
+	set_bit(func_no, &epc_group->function_num_map);
+	epf->func_no = func_no;
+
+	ret = pci_epf_bind(epf);
+	if (ret)
+		goto err_epf_bind;
+
+	return 0;
+
+err_epf_bind:
+	pci_epc_remove_epf(epc, epf);
+
+err_add_epf:
+	clear_bit(func_no, &epc_group->function_num_map);
+
+	return ret;
+}
+
+static void pci_epc_epf_unlink(struct config_item *epc_item,
+			       struct config_item *epf_item)
+{
+	struct pci_epc *epc;
+	struct pci_epf *epf;
+	struct pci_epf_group *epf_group = to_pci_epf_group(epf_item);
+	struct pci_epc_group *epc_group = to_pci_epc_group(epc_item);
+
+	WARN_ON_ONCE(epc_group->start);
+
+	epc = epc_group->epc;
+	epf = epf_group->epf;
+	clear_bit(epf->func_no, &epc_group->function_num_map);
+	pci_epf_unbind(epf);
+	pci_epc_remove_epf(epc, epf);
+}
+
+static struct configfs_item_operations pci_epc_item_ops = {
+	.allow_link	= pci_epc_epf_link,
+	.drop_link	= pci_epc_epf_unlink,
+};
+
+static struct config_item_type pci_epc_type = {
+	.ct_item_ops	= &pci_epc_item_ops,
+	.ct_attrs	= pci_epc_attrs,
+	.ct_owner	= THIS_MODULE,
+};
+
+struct config_group *pci_ep_cfs_add_epc_group(const char *name)
+{
+	int ret;
+	struct pci_epc *epc;
+	struct config_group *group;
+	struct pci_epc_group *epc_group;
+
+	epc_group = kzalloc(sizeof(*epc_group), GFP_KERNEL);
+	if (!epc_group) {
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	group = &epc_group->group;
+
+	config_group_init_type_name(group, name, &pci_epc_type);
+	ret = configfs_register_group(controllers_group, group);
+	if (ret) {
+		pr_err("failed to register configfs group for %s\n", name);
+		goto err_register_group;
+	}
+
+	epc = pci_epc_get(name);
+	if (IS_ERR(epc)) {
+		ret = PTR_ERR(epc);
+		goto err_epc_get;
+	}
+
+	epc_group->epc = epc;
+
+	return group;
+
+err_epc_get:
+	configfs_unregister_group(group);
+
+err_register_group:
+	kfree(epc_group);
+
+err:
+	return ERR_PTR(ret);
+}
+EXPORT_SYMBOL(pci_ep_cfs_add_epc_group);
+
+void pci_ep_cfs_remove_epc_group(struct config_group *group)
+{
+	struct pci_epc_group *epc_group;
+
+	if (!group)
+		return;
+
+	epc_group = container_of(group, struct pci_epc_group, group);
+	pci_epc_put(epc_group->epc);
+	configfs_unregister_group(&epc_group->group);
+	kfree(epc_group);
+}
+EXPORT_SYMBOL(pci_ep_cfs_remove_epc_group);
+
+#define PCI_EPF_HEADER_R(_name)						       \
+static ssize_t pci_epf_##_name##_show(struct config_item *item,	char *page)    \
+{									       \
+	struct pci_epf *epf = to_pci_epf_group(item)->epf;		       \
+	if (WARN_ON_ONCE(!epf->header))					       \
+		return -EINVAL;						       \
+	return sprintf(page, "0x%04x\n", epf->header->_name);		       \
+}
+
+#define PCI_EPF_HEADER_W_u32(_name)					       \
+static ssize_t pci_epf_##_name##_store(struct config_item *item,	       \
+				       const char *page, size_t len)	       \
+{									       \
+	u32 val;							       \
+	int ret;							       \
+	struct pci_epf *epf = to_pci_epf_group(item)->epf;		       \
+	if (WARN_ON_ONCE(!epf->header))					       \
+		return -EINVAL;						       \
+	ret = kstrtou32(page, 0, &val);					       \
+	if (ret)							       \
+		return ret;						       \
+	epf->header->_name = val;					       \
+	return len;							       \
+}
+
+#define PCI_EPF_HEADER_W_u16(_name)					       \
+static ssize_t pci_epf_##_name##_store(struct config_item *item,	       \
+				       const char *page, size_t len)	       \
+{									       \
+	u16 val;							       \
+	int ret;							       \
+	struct pci_epf *epf = to_pci_epf_group(item)->epf;		       \
+	if (WARN_ON_ONCE(!epf->header))					       \
+		return -EINVAL;						       \
+	ret = kstrtou16(page, 0, &val);					       \
+	if (ret)							       \
+		return ret;						       \
+	epf->header->_name = val;					       \
+	return len;							       \
+}
+
+#define PCI_EPF_HEADER_W_u8(_name)					       \
+static ssize_t pci_epf_##_name##_store(struct config_item *item,	       \
+				       const char *page, size_t len)	       \
+{									       \
+	u8 val;								       \
+	int ret;							       \
+	struct pci_epf *epf = to_pci_epf_group(item)->epf;		       \
+	if (WARN_ON_ONCE(!epf->header))					       \
+		return -EINVAL;						       \
+	ret = kstrtou8(page, 0, &val);					       \
+	if (ret)							       \
+		return ret;						       \
+	epf->header->_name = val;					       \
+	return len;							       \
+}
+
+static ssize_t pci_epf_msi_interrupts_store(struct config_item *item,
+					    const char *page, size_t len)
+{
+	u8 val;
+	int ret;
+
+	ret = kstrtou8(page, 0, &val);
+	if (ret)
+		return ret;
+
+	to_pci_epf_group(item)->epf->msi_interrupts = val;
+
+	return len;
+}
+
+static ssize_t pci_epf_msi_interrupts_show(struct config_item *item,
+					   char *page)
+{
+	return sprintf(page, "%d\n",
+		       to_pci_epf_group(item)->epf->msi_interrupts);
+}
+
+PCI_EPF_HEADER_R(vendorid)
+PCI_EPF_HEADER_W_u16(vendorid)
+
+PCI_EPF_HEADER_R(deviceid)
+PCI_EPF_HEADER_W_u16(deviceid)
+
+PCI_EPF_HEADER_R(revid)
+PCI_EPF_HEADER_W_u8(revid)
+
+PCI_EPF_HEADER_R(progif_code)
+PCI_EPF_HEADER_W_u8(progif_code)
+
+PCI_EPF_HEADER_R(subclass_code)
+PCI_EPF_HEADER_W_u8(subclass_code)
+
+PCI_EPF_HEADER_R(baseclass_code)
+PCI_EPF_HEADER_W_u8(baseclass_code)
+
+PCI_EPF_HEADER_R(cache_line_size)
+PCI_EPF_HEADER_W_u8(cache_line_size)
+
+PCI_EPF_HEADER_R(subsys_vendor_id)
+PCI_EPF_HEADER_W_u16(subsys_vendor_id)
+
+PCI_EPF_HEADER_R(subsys_id)
+PCI_EPF_HEADER_W_u16(subsys_id)
+
+PCI_EPF_HEADER_R(interrupt_pin)
+PCI_EPF_HEADER_W_u8(interrupt_pin)
+
+CONFIGFS_ATTR(pci_epf_, vendorid);
+CONFIGFS_ATTR(pci_epf_, deviceid);
+CONFIGFS_ATTR(pci_epf_, revid);
+CONFIGFS_ATTR(pci_epf_, progif_code);
+CONFIGFS_ATTR(pci_epf_, subclass_code);
+CONFIGFS_ATTR(pci_epf_, baseclass_code);
+CONFIGFS_ATTR(pci_epf_, cache_line_size);
+CONFIGFS_ATTR(pci_epf_, subsys_vendor_id);
+CONFIGFS_ATTR(pci_epf_, subsys_id);
+CONFIGFS_ATTR(pci_epf_, interrupt_pin);
+CONFIGFS_ATTR(pci_epf_, msi_interrupts);
+
+static struct configfs_attribute *pci_epf_attrs[] = {
+	&pci_epf_attr_vendorid,
+	&pci_epf_attr_deviceid,
+	&pci_epf_attr_revid,
+	&pci_epf_attr_progif_code,
+	&pci_epf_attr_subclass_code,
+	&pci_epf_attr_baseclass_code,
+	&pci_epf_attr_cache_line_size,
+	&pci_epf_attr_subsys_vendor_id,
+	&pci_epf_attr_subsys_id,
+	&pci_epf_attr_interrupt_pin,
+	&pci_epf_attr_msi_interrupts,
+	NULL,
+};
+
+static void pci_epf_release(struct config_item *item)
+{
+	struct pci_epf_group *epf_group = to_pci_epf_group(item);
+
+	pci_epf_destroy(epf_group->epf);
+	kfree(epf_group);
+}
+
+static struct configfs_item_operations pci_epf_ops = {
+	.release		= pci_epf_release,
+};
+
+static struct config_item_type pci_epf_type = {
+	.ct_item_ops	= &pci_epf_ops,
+	.ct_attrs	= pci_epf_attrs,
+	.ct_owner	= THIS_MODULE,
+};
+
+static struct config_group *pci_epf_make(struct config_group *group,
+					 const char *name)
+{
+	struct pci_epf_group *epf_group;
+	struct pci_epf *epf;
+
+	epf_group = kzalloc(sizeof(*epf_group), GFP_KERNEL);
+	if (!epf_group)
+		return ERR_PTR(-ENOMEM);
+
+	config_group_init_type_name(&epf_group->group, name, &pci_epf_type);
+
+	epf = pci_epf_create(group->cg_item.ci_name);
+	if (IS_ERR(epf)) {
+		pr_err("failed to create endpoint function device\n");
+		return ERR_PTR(-EINVAL);
+	}
+
+	epf_group->epf = epf;
+
+	return &epf_group->group;
+}
+
+static void pci_epf_drop(struct config_group *group, struct config_item *item)
+{
+	config_item_put(item);
+}
+
+static struct configfs_group_operations pci_epf_group_ops = {
+	.make_group     = &pci_epf_make,
+	.drop_item      = &pci_epf_drop,
+};
+
+static struct config_item_type pci_epf_group_type = {
+	.ct_group_ops	= &pci_epf_group_ops,
+	.ct_owner	= THIS_MODULE,
+};
+
+struct config_group *pci_ep_cfs_add_epf_group(const char *name)
+{
+	struct config_group *group;
+
+	group = configfs_register_default_group(functions_group, name,
+						&pci_epf_group_type);
+	if (IS_ERR(group))
+		pr_err("failed to register configfs group for %s function\n",
+		       name);
+
+	return group;
+}
+EXPORT_SYMBOL(pci_ep_cfs_add_epf_group);
+
+void pci_ep_cfs_remove_epf_group(struct config_group *group)
+{
+	if (IS_ERR_OR_NULL(group))
+		return;
+
+	configfs_unregister_default_group(group);
+}
+EXPORT_SYMBOL(pci_ep_cfs_remove_epf_group);
+
+static struct config_item_type pci_functions_type = {
+	.ct_owner	= THIS_MODULE,
+};
+
+static struct config_item_type pci_controllers_type = {
+	.ct_owner	= THIS_MODULE,
+};
+
+static struct config_item_type pci_ep_type = {
+	.ct_owner	= THIS_MODULE,
+};
+
+static struct configfs_subsystem pci_ep_cfs_subsys = {
+	.su_group = {
+		.cg_item = {
+			.ci_namebuf = "pci_ep",
+			.ci_type = &pci_ep_type,
+		},
+	},
+	.su_mutex = __MUTEX_INITIALIZER(pci_ep_cfs_subsys.su_mutex),
+};
+
+static int __init pci_ep_cfs_init(void)
+{
+	int ret;
+	struct config_group *root = &pci_ep_cfs_subsys.su_group;
+
+	config_group_init(root);
+
+	ret = configfs_register_subsystem(&pci_ep_cfs_subsys);
+	if (ret) {
+		pr_err("Error %d while registering subsystem %s\n",
+		       ret, root->cg_item.ci_namebuf);
+		goto err;
+	}
+
+	functions_group = configfs_register_default_group(root, "functions",
+							  &pci_functions_type);
+	if (IS_ERR(functions_group)) {
+		ret = PTR_ERR(functions_group);
+		pr_err("Error %d while registering functions group\n",
+		       ret);
+		goto err_functions_group;
+	}
+
+	controllers_group =
+		configfs_register_default_group(root, "controllers",
+						&pci_controllers_type);
+	if (IS_ERR(controllers_group)) {
+		ret = PTR_ERR(controllers_group);
+		pr_err("Error %d while registering controllers group\n",
+		       ret);
+		goto err_controllers_group;
+	}
+
+	return 0;
+
+err_controllers_group:
+	configfs_unregister_default_group(functions_group);
+
+err_functions_group:
+	configfs_unregister_subsystem(&pci_ep_cfs_subsys);
+
+err:
+	return ret;
+}
+module_init(pci_ep_cfs_init);
+
+static void __exit pci_ep_cfs_exit(void)
+{
+	configfs_unregister_default_group(controllers_group);
+	configfs_unregister_default_group(functions_group);
+	configfs_unregister_subsystem(&pci_ep_cfs_subsys);
+}
+module_exit(pci_ep_cfs_exit);
+
+MODULE_DESCRIPTION("PCI EP CONFIGFS");
+MODULE_AUTHOR("Kishon Vijay Abraham I <[e-mail]>");
+MODULE_LICENSE("GPL v2");

drivers/pci/endpoint/pci-epc-core.c

···
+/**
+ * PCI Endpoint *Controller* (EPC) library
+ *
+ * Copyright (C) 2017 Texas Instruments
+ * Author: Kishon Vijay Abraham I <[e-mail]>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 of
+ * the License as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+
+#include <linux/pci-epc.h>
+#include <linux/pci-epf.h>
+#include <linux/pci-ep-cfs.h>
+
+static struct class *pci_epc_class;
+
+static void devm_pci_epc_release(struct device *dev, void *res)
+{
+	struct pci_epc *epc = *(struct pci_epc **)res;
+
+	pci_epc_destroy(epc);
+}
+
+static int devm_pci_epc_match(struct device *dev, void *res, void *match_data)
+{
+	struct pci_epc **epc = res;
+
+	return *epc == match_data;
+}
+
+/**
+ * pci_epc_put() - release the PCI endpoint controller
+ * @epc: epc returned by pci_epc_get()
+ *
+ * release the refcount the caller obtained by invoking pci_epc_get()
+ */
+void pci_epc_put(struct pci_epc *epc)
+{
+	if (!epc || IS_ERR(epc))
+		return;
+
+	module_put(epc->ops->owner);
+	put_device(&epc->dev);
+}
+EXPORT_SYMBOL_GPL(pci_epc_put);
+
+/**
+ * pci_epc_get() - get the PCI endpoint controller
+ * @epc_name: device name of the endpoint controller
+ *
+ * Invoke to get struct pci_epc * corresponding to the device name of the
+ * endpoint controller
+ */
+struct pci_epc *pci_epc_get(const char *epc_name)
+{
+	int ret = -EINVAL;
+	struct pci_epc *epc;
+	struct device *dev;
+	struct class_dev_iter iter;
+
+	class_dev_iter_init(&iter, pci_epc_class, NULL, NULL);
+	while ((dev = class_dev_iter_next(&iter))) {
+		if (strcmp(epc_name, dev_name(dev)))
+			continue;
+
+		epc = to_pci_epc(dev);
+		if (!try_module_get(epc->ops->owner)) {
+			ret = -EINVAL;
+			goto err;
+		}
+
+		class_dev_iter_exit(&iter);
+		get_device(&epc->dev);
+		return epc;
+	}
+
+err:
+	class_dev_iter_exit(&iter);
+	return ERR_PTR(ret);
+}
+EXPORT_SYMBOL_GPL(pci_epc_get);
+
+/**
+ * pci_epc_stop() - stop the PCI link
+ * @epc: the link of the EPC device that has to be stopped
+ *
+ * Invoke to stop the PCI link
+ */
+void pci_epc_stop(struct pci_epc *epc)
+{
+	unsigned long flags;
+
+	if (IS_ERR(epc) || !epc->ops->stop)
+		return;
+
+	spin_lock_irqsave(&epc->lock, flags);
+	epc->ops->stop(epc);
+	spin_unlock_irqrestore(&epc->lock, flags);
+}
+EXPORT_SYMBOL_GPL(pci_epc_stop);
+
+/**
+ * pci_epc_start() - start the PCI link
+ * @epc: the link of *this* EPC device has to be started
+ *
+ * Invoke to start the PCI link
+ */
+int pci_epc_start(struct pci_epc *epc)
+{
+	int ret;
+	unsigned long flags;
+
+	if (IS_ERR(epc))
+		return -EINVAL;
+
+	if (!epc->ops->start)
+		return 0;
+
+	spin_lock_irqsave(&epc->lock, flags);
+	ret = epc->ops->start(epc);
+	spin_unlock_irqrestore(&epc->lock, flags);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(pci_epc_start);
+
+/**
+ * pci_epc_raise_irq() - interrupt the host system
+ * @epc: the EPC device which has to interrupt the host
+ * @type: specify the type of interrupt; legacy or MSI
+ * @interrupt_num: the MSI interrupt number
+ *
+ * Invoke to raise an MSI or legacy interrupt
+ */
+int pci_epc_raise_irq(struct pci_epc *epc, enum pci_epc_irq_type type,
+		      u8 interrupt_num)
+{
+	int ret;
+	unsigned long flags;
+
+	if (IS_ERR(epc))
+		return -EINVAL;
+
+	if (!epc->ops->raise_irq)
+		return 0;
+
+	spin_lock_irqsave(&epc->lock, flags);
+	ret = epc->ops->raise_irq(epc, type, interrupt_num);
+	spin_unlock_irqrestore(&epc->lock, flags);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(pci_epc_raise_irq);
+
+/**
+ * pci_epc_get_msi() - get the number of MSI interrupt numbers allocated
+ * @epc: the EPC device to which MSI interrupts was requested
+ *
+ * Invoke to get the number of MSI interrupts allocated by the RC
+ */
+int pci_epc_get_msi(struct pci_epc *epc)
+{
+	int interrupt;
+	unsigned long flags;
+
+	if (IS_ERR(epc))
+		return 0;
+
+	if (!epc->ops->get_msi)
+		return 0;
+
+	spin_lock_irqsave(&epc->lock, flags);
+	interrupt = epc->ops->get_msi(epc);
+	spin_unlock_irqrestore(&epc->lock, flags);
+
+	if (interrupt < 0)
+		return 0;
+
+	interrupt = 1 << interrupt;
+
+	return interrupt;
+}
+EXPORT_SYMBOL_GPL(pci_epc_get_msi);
+
+/**
+ * pci_epc_set_msi() - set the number of MSI interrupt numbers required
+ * @epc: the EPC device on which MSI has to be configured
+ * @interrupts: number of MSI interrupts required by the EPF
+ *
+ * Invoke to set the required number of MSI interrupts.
+ */
+int pci_epc_set_msi(struct pci_epc *epc, u8 interrupts)
+{
+	int ret;
+	u8 encode_int;
+	unsigned long flags;
+
+	if (IS_ERR(epc))
+		return -EINVAL;
+
+	if (!epc->ops->set_msi)
+		return 0;
+
+	encode_int = order_base_2(interrupts);
+
+	spin_lock_irqsave(&epc->lock, flags);
+	ret = epc->ops->set_msi(epc, encode_int);
+	spin_unlock_irqrestore(&epc->lock, flags);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(pci_epc_set_msi);
+
+/**
+ * pci_epc_unmap_addr() - unmap CPU address from PCI address
+ * @epc: the EPC device on which address is allocated
+ * @phys_addr: physical address of the local system
+ *
+ * Invoke to unmap the CPU address from PCI address.
+ */
+void pci_epc_unmap_addr(struct pci_epc *epc, phys_addr_t phys_addr)
+{
+	unsigned long flags;
+
+	if (IS_ERR(epc))
+		return;
+
+	if (!epc->ops->unmap_addr)
+		return;
+
+	spin_lock_irqsave(&epc->lock, flags);
+	epc->ops->unmap_addr(epc, phys_addr);
+	spin_unlock_irqrestore(&epc->lock, flags);
+}
+EXPORT_SYMBOL_GPL(pci_epc_unmap_addr);
+
+/**
+ * pci_epc_map_addr() - map CPU address to PCI address
+ * @epc: the EPC device on which address is allocated
+ * @phys_addr: physical address of the local system
+ * @pci_addr: PCI address to which the physical address should be mapped
+ * @size: the size of the allocation
+ *
+ * Invoke to map CPU address with PCI address.
+ */
+int pci_epc_map_addr(struct pci_epc *epc, phys_addr_t phys_addr,
+		     u64 pci_addr, size_t size)
+{
+	int ret;
+	unsigned long flags;
+
+	if (IS_ERR(epc))
+		return -EINVAL;
+
+	if (!epc->ops->map_addr)
+		return 0;
+
+	spin_lock_irqsave(&epc->lock, flags);
+	ret = epc->ops->map_addr(epc, phys_addr, pci_addr, size);
+	spin_unlock_irqrestore(&epc->lock, flags);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(pci_epc_map_addr);
+
+/**
+ * pci_epc_clear_bar() - reset the BAR
+ * @epc: the EPC device for which the BAR has to be cleared
+ * @bar: the BAR number that has to be reset
+ *
+ * Invoke to reset the BAR of the endpoint device.
+ */
+void pci_epc_clear_bar(struct pci_epc *epc, int bar)
+{
+	unsigned long flags;
+
+	if (IS_ERR(epc))
+		return;
+
+	if (!epc->ops->clear_bar)
+		return;
+
+	spin_lock_irqsave(&epc->lock, flags);
+	epc->ops->clear_bar(epc, bar);
+	spin_unlock_irqrestore(&epc->lock, flags);
+}
+EXPORT_SYMBOL_GPL(pci_epc_clear_bar);
+
+/**
+ * pci_epc_set_bar() - configure BAR in order for host to assign PCI addr space
+ * @epc: the EPC device on which BAR has to be configured
+ * @bar: the BAR number that has to be configured
+ * @size: the size of the addr space
+ * @flags: specify memory allocation/io allocation/32bit address/64 bit address
+ *
+ * Invoke to configure the BAR of the endpoint device.
+ */
+int pci_epc_set_bar(struct pci_epc *epc, enum pci_barno bar,
+		    dma_addr_t bar_phys, size_t size, int flags)
+{
+	int ret;
+	unsigned long irq_flags;
+
+	if (IS_ERR(epc))
+		return -EINVAL;
+
+	if (!epc->ops->set_bar)
+		return 0;
+
+	spin_lock_irqsave(&epc->lock, irq_flags);
+	ret = epc->ops->set_bar(epc, bar, bar_phys, size, flags);
+	spin_unlock_irqrestore(&epc->lock, irq_flags);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(pci_epc_set_bar);
+
+/**
+ * pci_epc_write_header() - write standard configuration header
+ * @epc: the EPC device to which the configuration header should be written
+ * @header: standard configuration header fields
+ *
+ * Invoke to write the configuration header to the endpoint controller. Every
+ * endpoint controller will have a dedicated location to which the standard
+ * configuration header would be written. The callback function should write
+ * the header fields to this dedicated location.
+ */
+int pci_epc_write_header(struct pci_epc *epc, struct pci_epf_header *header)
+{
+	int ret;
+	unsigned long flags;
+
+	if (IS_ERR(epc))
+		return -EINVAL;
+
+	if (!epc->ops->write_header)
+		return 0;
+
+	spin_lock_irqsave(&epc->lock, flags);
+	ret = epc->ops->write_header(epc, header);
+	spin_unlock_irqrestore(&epc->lock, flags);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(pci_epc_write_header);
+
+/**
+ * pci_epc_add_epf() - bind PCI endpoint function to an endpoint controller
+ * @epc: the EPC device to which the endpoint function should be added
+ * @epf: the endpoint function to be added
+ *
+ * A PCI endpoint device can have one or more functions. In the case of PCIe,
+ * the specification allows up to 8 PCIe endpoint functions. Invoke
+ * pci_epc_add_epf() to add a PCI endpoint function to an endpoint controller.
+ */
+int pci_epc_add_epf(struct pci_epc *epc, struct pci_epf *epf)
+{
+	unsigned long flags;
+
+	if (epf->epc)
+		return -EBUSY;
+
+	if (IS_ERR(epc))
+		return -EINVAL;
+
+	if (epf->func_no > epc->max_functions - 1)
+		return -EINVAL;
+
+	epf->epc = epc;
+	dma_set_coherent_mask(&epf->dev, epc->dev.coherent_dma_mask);
+	epf->dev.dma_mask = epc->dev.dma_mask;
+
+	spin_lock_irqsave(&epc->lock, flags);
+	list_add_tail(&epf->list, &epc->pci_epf);
+	spin_unlock_irqrestore(&epc->lock, flags);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(pci_epc_add_epf);
+
+/**
+ * pci_epc_remove_epf() - remove PCI endpoint function from endpoint controller
+ * @epc: the EPC device from which the endpoint function should be removed
+ * @epf: the endpoint function to be removed
+ *
+ * Invoke to remove PCI endpoint function from the endpoint controller.
+ */
+void pci_epc_remove_epf(struct pci_epc *epc, struct pci_epf *epf)
+{
+	unsigned long flags;
+
+	if (!epc || IS_ERR(epc))
+		return;
+
+	spin_lock_irqsave(&epc->lock, flags);
+	list_del(&epf->list);
+	spin_unlock_irqrestore(&epc->lock, flags);
+}
+EXPORT_SYMBOL_GPL(pci_epc_remove_epf);
+
+/**
+ * pci_epc_linkup() - Notify the EPF device that EPC device has established a
+ *		      connection with the Root Complex.
+ * @epc: the EPC device which has established link with the host
+ *
+ * Invoke to Notify the EPF device that the EPC device has established a
+ * connection with the Root Complex.
+ */
+void pci_epc_linkup(struct pci_epc *epc)
+{
+	unsigned long flags;
+	struct pci_epf *epf;
+
+	if (!epc || IS_ERR(epc))
+		return;
+
+	spin_lock_irqsave(&epc->lock, flags);
+	list_for_each_entry(epf, &epc->pci_epf, list)
+		pci_epf_linkup(epf);
+	spin_unlock_irqrestore(&epc->lock, flags);
+}
+EXPORT_SYMBOL_GPL(pci_epc_linkup);
+
+/**
+ * pci_epc_destroy() - destroy the EPC device
+ * @epc: the EPC device that has to be destroyed
+ *
+ * Invoke to destroy the PCI EPC device
+ */
+void pci_epc_destroy(struct pci_epc *epc)
+{
+	pci_ep_cfs_remove_epc_group(epc->group);
+	device_unregister(&epc->dev);
+	kfree(epc);
+}
+EXPORT_SYMBOL_GPL(pci_epc_destroy);
+
+/**
+ * devm_pci_epc_destroy() - destroy the EPC device
+ * @dev: device that wants to destroy the EPC
+ * @epc: the EPC device that has to be destroyed
+ *
+ * Invoke to destroy the devres associated with this
+ * pci_epc and destroy the EPC device.
+ */
+void devm_pci_epc_destroy(struct device *dev, struct pci_epc *epc)
+{
+	int r;
+
+	r = devres_destroy(dev, devm_pci_epc_release, devm_pci_epc_match,
+			   epc);
+	dev_WARN_ONCE(dev, r, "couldn't find PCI EPC resource\n");
+}
+EXPORT_SYMBOL_GPL(devm_pci_epc_destroy);
+
+/**
+ * __pci_epc_create() - create a new endpoint controller (EPC) device
+ * @dev: device that is creating the new EPC
+ * @ops: function pointers for performing EPC operations
+ * @owner: the owner of the module that creates the EPC device
+ *
+ * Invoke to create a new EPC device and add it to pci_epc class.
+ */
+struct pci_epc *
+__pci_epc_create(struct device *dev, const struct pci_epc_ops *ops,
+		 struct module *owner)
+{
+	int ret;
+	struct pci_epc *epc;
+
+	if (WARN_ON(!dev)) {
+		ret = -EINVAL;
+		goto err_ret;
+	}
+
+	epc = kzalloc(sizeof(*epc), GFP_KERNEL);
+	if (!epc) {
+		ret = -ENOMEM;
+		goto err_ret;
+	}
+
+	spin_lock_init(&epc->lock);
+	INIT_LIST_HEAD(&epc->pci_epf);
+
+	device_initialize(&epc->dev);
+	dma_set_coherent_mask(&epc->dev, dev->coherent_dma_mask);
+	epc->dev.class = pci_epc_class;
+	epc->dev.dma_mask = dev->dma_mask;
+	epc->ops = ops;
+
+	ret = dev_set_name(&epc->dev, "%s", dev_name(dev));
+	if (ret)
+		goto put_dev;
+
+	ret = device_add(&epc->dev);
+	if (ret)
+		goto put_dev;
+
+	epc->group = pci_ep_cfs_add_epc_group(dev_name(dev));
+
+	return epc;
+
+put_dev:
+	put_device(&epc->dev);
+	kfree(epc);
+
+err_ret:
+	return ERR_PTR(ret);
+}
+EXPORT_SYMBOL_GPL(__pci_epc_create);
+
+/**
+ * __devm_pci_epc_create() - create a new endpoint controller (EPC) device
+ * @dev: device that is creating the new EPC
+ * @ops: function pointers for performing EPC operations
+ * @owner: the owner of the module that creates the EPC device
+ *
+ * Invoke to create a new EPC device and add it to pci_epc class.
+ * While at that, it also associates the device with the pci_epc using devres.
+ * On driver detach, release function is invoked on the devres data,
+ * then, devres data is freed.
+ */
+struct pci_epc *
+__devm_pci_epc_create(struct device *dev, const struct pci_epc_ops *ops,
+		      struct module *owner)
+{
+	struct pci_epc **ptr, *epc;
+
+	ptr = devres_alloc(devm_pci_epc_release, sizeof(*ptr), GFP_KERNEL);
+	if (!ptr)
+		return ERR_PTR(-ENOMEM);
+
+	epc = __pci_epc_create(dev, ops, owner);
+	if (!IS_ERR(epc)) {
+		*ptr = epc;
+		devres_add(dev, ptr);
+	} else {
+		devres_free(ptr);
+	}
+
+	return epc;
+}
+EXPORT_SYMBOL_GPL(__devm_pci_epc_create);
+
+static int __init pci_epc_init(void)
+{
+	pci_epc_class = class_create(THIS_MODULE, "pci_epc");
+	if (IS_ERR(pci_epc_class)) {
+		pr_err("failed to create pci epc class --> %ld\n",
+		       PTR_ERR(pci_epc_class));
+		return PTR_ERR(pci_epc_class);
+	}
+
+	return 0;
+}
+module_init(pci_epc_init);
+
+static void __exit pci_epc_exit(void)
+{
+	class_destroy(pci_epc_class);
+}
+module_exit(pci_epc_exit);
+
+MODULE_DESCRIPTION("PCI EPC Library");
+MODULE_AUTHOR("Kishon Vijay Abraham I <[e-mail]>");
+MODULE_LICENSE("GPL v2");

drivers/pci/endpoint/pci-epc-mem.c

···
+/**
+ * PCI Endpoint *Controller* Address Space Management
+ *
+ * Copyright (C) 2017 Texas Instruments
+ * Author: Kishon Vijay Abraham I <[e-mail]>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 of
+ * the License as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+
+#include <linux/pci-epc.h>
+
+/**
+ * pci_epc_mem_init() - initialize the pci_epc_mem structure
+ * @epc: the EPC device that invoked pci_epc_mem_init
+ * @phys_base: the physical address of the base
+ * @size: the size of the address space
+ *
+ * Invoke to initialize the pci_epc_mem structure used by the
+ * endpoint functions to allocate mapped PCI address.
+ */
+int pci_epc_mem_init(struct pci_epc *epc, phys_addr_t phys_base, size_t size)
+{
+	int ret;
+	struct pci_epc_mem *mem;
+	unsigned long *bitmap;
+	int pages = size >> PAGE_SHIFT;
+	int bitmap_size = BITS_TO_LONGS(pages) * sizeof(long);
+
+	mem = kzalloc(sizeof(*mem), GFP_KERNEL);
+	if (!mem) {
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	bitmap = kzalloc(bitmap_size, GFP_KERNEL);
+	if (!bitmap) {
+		ret = -ENOMEM;
+		goto err_mem;
+	}
+
+	mem->bitmap = bitmap;
+	mem->phys_base = phys_base;
+	mem->pages = pages;
+	mem->size = size;
+
+	epc->mem = mem;
+
+	return 0;
+
+err_mem:
+	kfree(mem);
+
+err:
+return ret;
+}
+EXPORT_SYMBOL_GPL(pci_epc_mem_init);
+
+/**
+ * pci_epc_mem_exit() - cleanup the pci_epc_mem structure
+ * @epc: the EPC device that invoked pci_epc_mem_exit
+ *
+ * Invoke to cleanup the pci_epc_mem structure allocated in
+ * pci_epc_mem_init().
+ */
+void pci_epc_mem_exit(struct pci_epc *epc)
+{
+	struct pci_epc_mem *mem = epc->mem;
+
+	epc->mem = NULL;
+	kfree(mem->bitmap);
+	kfree(mem);
+}
+EXPORT_SYMBOL_GPL(pci_epc_mem_exit);
+
+/**
+ * pci_epc_mem_alloc_addr() - allocate memory address from EPC addr space
+ * @epc: the EPC device on which memory has to be allocated
+ * @phys_addr: populate the allocated physical address here
+ * @size: the size of the address space that has to be allocated
+ *
+ * Invoke to allocate memory address from the EPC address space. This
+ * is usually done to map the remote RC address into the local system.
+ */
+void __iomem *pci_epc_mem_alloc_addr(struct pci_epc *epc,
+				     phys_addr_t *phys_addr, size_t size)
+{
+	int pageno;
+	void __iomem *virt_addr;
+	struct pci_epc_mem *mem = epc->mem;
+	int order = get_order(size);
+
+	pageno = bitmap_find_free_region(mem->bitmap, mem->pages, order);
+	if (pageno < 0)
+		return NULL;
+
+	*phys_addr = mem->phys_base + (pageno << PAGE_SHIFT);
+	virt_addr = ioremap(*phys_addr, size);
+	if (!virt_addr)
+		bitmap_release_region(mem->bitmap, pageno, order);
+
+	return virt_addr;
+}
+EXPORT_SYMBOL_GPL(pci_epc_mem_alloc_addr);
+
+/**
+ * pci_epc_mem_free_addr() - free the allocated memory address
+ * @epc: the EPC device on which memory was allocated
+ * @phys_addr: the allocated physical address
+ * @virt_addr: virtual address of the allocated mem space
+ * @size: the size of the allocated address space
+ *
+ * Invoke to free the memory allocated using pci_epc_mem_alloc_addr.
+ */
+void pci_epc_mem_free_addr(struct pci_epc *epc, phys_addr_t phys_addr,
+			   void __iomem *virt_addr, size_t size)
+{
+	int pageno;
+	int order = get_order(size);
+	struct pci_epc_mem *mem = epc->mem;
+
+	iounmap(virt_addr);
+	pageno = (phys_addr - mem->phys_base) >> PAGE_SHIFT;
+	bitmap_release_region(mem->bitmap, pageno, order);
+}
+EXPORT_SYMBOL_GPL(pci_epc_mem_free_addr);
+
+MODULE_DESCRIPTION("PCI EPC Address Space Management");
+MODULE_AUTHOR("Kishon Vijay Abraham I <[e-mail]>");
+MODULE_LICENSE("GPL v2");

drivers/pci/endpoint/pci-epf-core.c

···
+/**
+ * PCI Endpoint *Function* (EPF) library
+ *
+ * Copyright (C) 2017 Texas Instruments
+ * Author: Kishon Vijay Abraham I <[e-mail]>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 of
+ * the License as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+
+#include <linux/pci-epc.h>
+#include <linux/pci-epf.h>
+#include <linux/pci-ep-cfs.h>
+
+static struct bus_type pci_epf_bus_type;
+static struct device_type pci_epf_type;
+
+/**
+ * pci_epf_linkup() - Notify the function driver that EPC device has
+ *		      established a connection with the Root Complex.
+ * @epf: the EPF device bound to the EPC device which has established
+ *	 the connection with the host
+ *
+ * Invoke to notify the function driver that EPC device has established
+ * a connection with the Root Complex.
+ */
+void pci_epf_linkup(struct pci_epf *epf)
+{
+	if (!epf->driver) {
+		dev_WARN(&epf->dev, "epf device not bound to driver\n");
+		return;
+	}
+
+	epf->driver->ops->linkup(epf);
+}
+EXPORT_SYMBOL_GPL(pci_epf_linkup);
+
+/**
+ * pci_epf_unbind() - Notify the function driver that the binding between the
+ *		      EPF device and EPC device has been lost
+ * @epf: the EPF device which has lost the binding with the EPC device
+ *
+ * Invoke to notify the function driver that the binding between the EPF device
+ * and EPC device has been lost.
+ */
+void pci_epf_unbind(struct pci_epf *epf)
+{
+	if (!epf->driver) {
+		dev_WARN(&epf->dev, "epf device not bound to driver\n");
+		return;
+	}
+
+	epf->driver->ops->unbind(epf);
+	module_put(epf->driver->owner);
+}
+EXPORT_SYMBOL_GPL(pci_epf_unbind);
+
+/**
+ * pci_epf_bind() - Notify the function driver that the EPF device has been
+ *		    bound to a EPC device
+ * @epf: the EPF device which has been bound to the EPC device
+ *
+ * Invoke to notify the function driver that it has been bound to a EPC device
+ */
+int pci_epf_bind(struct pci_epf *epf)
+{
+	if (!epf->driver) {
+		dev_WARN(&epf->dev, "epf device not bound to driver\n");
+		return -EINVAL;
+	}
+
+	if (!try_module_get(epf->driver->owner))
+		return -EAGAIN;
+
+	return epf->driver->ops->bind(epf);
+}
+EXPORT_SYMBOL_GPL(pci_epf_bind);
+
+/**
+ * pci_epf_free_space() - free the allocated PCI EPF register space
+ * @addr: the virtual address of the PCI EPF register space
+ * @bar: the BAR number corresponding to the register space
+ *
+ * Invoke to free the allocated PCI EPF register space.
+ */
+void pci_epf_free_space(struct pci_epf *epf, void *addr, enum pci_barno bar)
+{
+	struct device *dev = &epf->dev;
+
+	if (!addr)
+		return;
+
+	dma_free_coherent(dev, epf->bar[bar].size, addr,
+			  epf->bar[bar].phys_addr);
+
+	epf->bar[bar].phys_addr = 0;
+	epf->bar[bar].size = 0;
+}
+EXPORT_SYMBOL_GPL(pci_epf_free_space);
+
+/**
+ * pci_epf_alloc_space() - allocate memory for the PCI EPF register space
+ * @size: the size of the memory that has to be allocated
+ * @bar: the BAR number corresponding to the allocated register space
+ *
+ * Invoke to allocate memory for the PCI EPF register space.
+ */
+void *pci_epf_alloc_space(struct pci_epf *epf, size_t size, enum pci_barno bar)
+{
+	void *space;
+	struct device *dev = &epf->dev;
+	dma_addr_t phys_addr;
+
+	if (size < 128)
+		size = 128;
+	size = roundup_pow_of_two(size);
+
+	space = dma_alloc_coherent(dev, size, &phys_addr, GFP_KERNEL);
+	if (!space) {
+		dev_err(dev, "failed to allocate mem space\n");
+		return NULL;
+	}
+
+	epf->bar[bar].phys_addr = phys_addr;
+	epf->bar[bar].size = size;
+
+	return space;
+}
+EXPORT_SYMBOL_GPL(pci_epf_alloc_space);
+
+/**
+ * pci_epf_unregister_driver() - unregister the PCI EPF driver
+ * @driver: the PCI EPF driver that has to be unregistered
+ *
+ * Invoke to unregister the PCI EPF driver.
+ */
+void pci_epf_unregister_driver(struct pci_epf_driver *driver)
+{
+	pci_ep_cfs_remove_epf_group(driver->group);
+	driver_unregister(&driver->driver);
+}
+EXPORT_SYMBOL_GPL(pci_epf_unregister_driver);
+
+/**
+ * __pci_epf_register_driver() - register a new PCI EPF driver
+ * @driver: structure representing PCI EPF driver
+ * @owner: the owner of the module that registers the PCI EPF driver
+ *
+ * Invoke to register a new PCI EPF driver.
+ */
+int __pci_epf_register_driver(struct pci_epf_driver *driver,
+			      struct module *owner)
+{
+	int ret;
+
+	if (!driver->ops)
+		return -EINVAL;
+
+	if (!driver->ops->bind || !driver->ops->unbind || !driver->ops->linkup)
+		return -EINVAL;
+
+	driver->driver.bus = &pci_epf_bus_type;
+	driver->driver.owner = owner;
+
+	ret = driver_register(&driver->driver);
+	if (ret)
+		return ret;
+
+	driver->group = pci_ep_cfs_add_epf_group(driver->driver.name);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(__pci_epf_register_driver);
+
+/**
+ * pci_epf_destroy() - destroy the created PCI EPF device
+ * @epf: the PCI EPF device that has to be destroyed.
+ *
+ * Invoke to destroy the PCI EPF device created by invoking pci_epf_create().
+ */
+void pci_epf_destroy(struct pci_epf *epf)
+{
+	device_unregister(&epf->dev);
+}
+EXPORT_SYMBOL_GPL(pci_epf_destroy);
+
+/**
+ * pci_epf_create() - create a new PCI EPF device
+ * @name: the name of the PCI EPF device. This name will be used to bind the
+ *	  the EPF device to a EPF driver
+ *
+ * Invoke to create a new PCI EPF device by providing the name of the function
+ * device.
+ */
+struct pci_epf *pci_epf_create(const char *name)
+{
+	int ret;
+	struct pci_epf *epf;
+	struct device *dev;
+	char *func_name;
+	char *buf;
+
+	epf = kzalloc(sizeof(*epf), GFP_KERNEL);
+	if (!epf) {
+		ret = -ENOMEM;
+		goto err_ret;
+	}
+
+	buf = kstrdup(name, GFP_KERNEL);
+	if (!buf) {
+		ret = -ENOMEM;
+		goto free_epf;
+	}
+
+	func_name = buf;
+	buf = strchrnul(buf, '.');
+	*buf = '\0';
+
+	epf->name = kstrdup(func_name, GFP_KERNEL);
+	if (!epf->name) {
+		ret = -ENOMEM;
+		goto free_func_name;
+	}
+
+	dev = &epf->dev;
+	device_initialize(dev);
+	dev->bus = &pci_epf_bus_type;
+	dev->type = &pci_epf_type;
+
+	ret = dev_set_name(dev, "%s", name);
+	if (ret)
+		goto put_dev;
+
+	ret = device_add(dev);
+	if (ret)
+		goto put_dev;
+
+	kfree(func_name);
+	return epf;
+
+put_dev:
+	put_device(dev);
+	kfree(epf->name);
+
+free_func_name:
+	kfree(func_name);
+
+free_epf:
+	kfree(epf);
+
+err_ret:
+	return ERR_PTR(ret);
+}
+EXPORT_SYMBOL_GPL(pci_epf_create);
+
+static void pci_epf_dev_release(struct device *dev)
+{
+	struct pci_epf *epf = to_pci_epf(dev);
+
+	kfree(epf->name);
+	kfree(epf);
+}
+
+static struct device_type pci_epf_type = {
+	.release	= pci_epf_dev_release,
+};
+
+static int
+pci_epf_match_id(const struct pci_epf_device_id *id, const struct pci_epf *epf)
+{
+	while (id->name[0]) {
+		if (strcmp(epf->name, id->name) == 0)
+			return true;
+		id++;
+	}
+
+	return false;
+}
+
+static int pci_epf_device_match(struct device *dev, struct device_driver *drv)
+{
+	struct pci_epf *epf = to_pci_epf(dev);
+	struct pci_epf_driver *driver = to_pci_epf_driver(drv);
+
+	if (driver->id_table)
+		return pci_epf_match_id(driver->id_table, epf);
+
+	return !strcmp(epf->name, drv->name);
+}
+
+static int pci_epf_device_probe(struct device *dev)
+{
+	struct pci_epf *epf = to_pci_epf(dev);
+	struct pci_epf_driver *driver = to_pci_epf_driver(dev->driver);
+
+	if (!driver->probe)
+		return -ENODEV;
+
+	epf->driver = driver;
+
+	return driver->probe(epf);
+}
+
+static int pci_epf_device_remove(struct device *dev)
+{
+	int ret;
+	struct pci_epf *epf = to_pci_epf(dev);
+	struct pci_epf_driver *driver = to_pci_epf_driver(dev->driver);
+
+	ret = driver->remove(epf);
+	epf->driver = NULL;
+
+	return ret;
+}
+
+static struct bus_type pci_epf_bus_type = {
+	.name		= "pci-epf",
+	.match		= pci_epf_device_match,
+	.probe		= pci_epf_device_probe,
+	.remove		= pci_epf_device_remove,
+};
+
+static int __init pci_epf_init(void)
+{
+	int ret;
+
+	ret = bus_register(&pci_epf_bus_type);
+	if (ret) {
+		pr_err("failed to register pci epf bus --> %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+module_init(pci_epf_init);
+
+static void __exit pci_epf_exit(void)
+{
+	bus_unregister(&pci_epf_bus_type);
+}
+module_exit(pci_epf_exit);
+
+MODULE_DESCRIPTION("PCI EPF Library");
+MODULE_AUTHOR("Kishon Vijay Abraham I <[e-mail]>");
+MODULE_LICENSE("GPL v2");

drivers/pci/host/Kconfig

···
 	 or End Point. The current option selection will only
 	 support root port enabling.
 
+config PCI_FTPCI100
+	bool "Faraday Technology FTPCI100 PCI controller"
+	depends on OF
+	depends on ARM
+	default ARCH_GEMINI
+
 config PCI_TEGRA
 	bool "NVIDIA Tegra PCIe controller"
 	depends on ARCH_TEGRA
···
 
 config PCIE_IPROC
 	tristate
+	select PCI_DOMAINS
 	help
 	  This enables the iProc PCIe core controller support for Broadcom's
 	  iProc family of SoCs. An appropriate bus interface driver needs
···
 	depends on ARM && (ARCH_BCM_IPROC || COMPILE_TEST)
 	select PCIE_IPROC
 	select BCMA
-	select PCI_DOMAINS
 	default ARCH_BCM_5301X
 	help
 	  Say Y here if you want to use the Broadcom iProc PCIe controller
···
 	  Say Y here if you want ECAM support for CN88XX-Pass-1.x Cavium Thunder SoCs.
 
 config PCIE_ROCKCHIP
-	bool "Rockchip PCIe controller"
+	tristate "Rockchip PCIe controller"
 	depends on ARCH_ROCKCHIP || COMPILE_TEST
 	depends on OF
 	depends on PCI_MSI_IRQ_DOMAIN

drivers/pci/host/Makefile

···
+obj-$(CONFIG_PCI_FTPCI100) += pci-ftpci100.o
 obj-$(CONFIG_PCI_HYPERV) += pci-hyperv.o
 obj-$(CONFIG_PCI_MVEBU) += pci-mvebu.o
 obj-$(CONFIG_PCI_AARDVARK) += pci-aardvark.o

drivers/pci/host/pci-aardvark.c

···
 	struct list_head resources;
 	struct irq_domain *irq_domain;
 	struct irq_chip irq_chip;
-	struct msi_controller msi;
 	struct irq_domain *msi_domain;
+	struct irq_domain *msi_inner_domain;
+	struct irq_chip msi_bottom_irq_chip;
 	struct irq_chip msi_irq_chip;
-	DECLARE_BITMAP(msi_irq_in_use, MSI_IRQ_NUM);
+	struct msi_domain_info msi_domain_info;
+	DECLARE_BITMAP(msi_used, MSI_IRQ_NUM);
 	struct mutex msi_used_lock;
 	u16 msi_msg;
 	int root_bus_nr;
···
 	.write = advk_pcie_wr_conf,
 };
 
-static int advk_pcie_alloc_msi(struct advk_pcie *pcie)
+static void advk_msi_irq_compose_msi_msg(struct irq_data *data,
+					 struct msi_msg *msg)
 {
-	int hwirq;
+	struct advk_pcie *pcie = irq_data_get_irq_chip_data(data);
+	phys_addr_t msi_msg = virt_to_phys(&pcie->msi_msg);
+
+	msg->address_lo = lower_32_bits(msi_msg);
+	msg->address_hi = upper_32_bits(msi_msg);
+	msg->data = data->irq;
+}
+
+static int advk_msi_set_affinity(struct irq_data *irq_data,
+				 const struct cpumask *mask, bool force)
+{
+	return -EINVAL;
+}
+
+static int advk_msi_irq_domain_alloc(struct irq_domain *domain,
+				     unsigned int virq,
+				     unsigned int nr_irqs, void *args)
+{
+	struct advk_pcie *pcie = domain->host_data;
+	int hwirq, i;
 
 	mutex_lock(&pcie->msi_used_lock);
-	hwirq = find_first_zero_bit(pcie->msi_irq_in_use, MSI_IRQ_NUM);
-	if (hwirq >= MSI_IRQ_NUM)
-		hwirq = -ENOSPC;
-	else
-		set_bit(hwirq, pcie->msi_irq_in_use);
+	hwirq = bitmap_find_next_zero_area(pcie->msi_used, MSI_IRQ_NUM,
+					   0, nr_irqs, 0);
+	if (hwirq >= MSI_IRQ_NUM) {
+		mutex_unlock(&pcie->msi_used_lock);
+		return -ENOSPC;
+	}
+
+	bitmap_set(pcie->msi_used, hwirq, nr_irqs);
 	mutex_unlock(&pcie->msi_used_lock);
+
+	for (i = 0; i < nr_irqs; i++)
+		irq_domain_set_info(domain, virq + i, hwirq + i,
+				    &pcie->msi_bottom_irq_chip,
+				    domain->host_data, handle_simple_irq,
+				    NULL, NULL);
 
 	return hwirq;
 }
 
-static void advk_pcie_free_msi(struct advk_pcie *pcie, int hwirq)
+static void advk_msi_irq_domain_free(struct irq_domain *domain,
+				     unsigned int virq, unsigned int nr_irqs)
 {
-	struct device *dev = &pcie->pdev->dev;
+	struct irq_data *d = irq_domain_get_irq_data(domain, virq);
+	struct advk_pcie *pcie = domain->host_data;
 
 	mutex_lock(&pcie->msi_used_lock);
-	if (!test_bit(hwirq, pcie->msi_irq_in_use))
-		dev_err(dev, "trying to free unused MSI#%d\n", hwirq);
-	else
-		clear_bit(hwirq, pcie->msi_irq_in_use);
+	bitmap_clear(pcie->msi_used, d->hwirq, nr_irqs);
 	mutex_unlock(&pcie->msi_used_lock);
 }
 
-static int advk_pcie_setup_msi_irq(struct msi_controller *chip,
-				   struct pci_dev *pdev,
-				   struct msi_desc *desc)
-{
-	struct advk_pcie *pcie = pdev->bus->sysdata;
-	struct msi_msg msg;
-	int virq, hwirq;
-	phys_addr_t msi_msg_phys;
-
-	/* We support MSI, but not MSI-X */
-	if (desc->msi_attrib.is_msix)
-		return -EINVAL;
-
-	hwirq = advk_pcie_alloc_msi(pcie);
-	if (hwirq < 0)
-		return hwirq;
-
-	virq = irq_create_mapping(pcie->msi_domain, hwirq);
-	if (!virq) {
-		advk_pcie_free_msi(pcie, hwirq);
-		return -EINVAL;
-	}
-
-	irq_set_msi_desc(virq, desc);
-
-	msi_msg_phys = virt_to_phys(&pcie->msi_msg);
-
-	msg.address_lo = lower_32_bits(msi_msg_phys);
-	msg.address_hi = upper_32_bits(msi_msg_phys);
-	msg.data = virq;
-
-	pci_write_msi_msg(virq, &msg);
-
-	return 0;
-}
-
-static void advk_pcie_teardown_msi_irq(struct msi_controller *chip,
-				       unsigned int irq)
-{
-	struct irq_data *d = irq_get_irq_data(irq);
-	struct msi_desc *msi = irq_data_get_msi_desc(d);
-	struct advk_pcie *pcie = msi_desc_to_pci_sysdata(msi);
-	unsigned long hwirq = d->hwirq;
-
-	irq_dispose_mapping(irq);
-	advk_pcie_free_msi(pcie, hwirq);
-}
-
-static int advk_pcie_msi_map(struct irq_domain *domain,
-			     unsigned int virq, irq_hw_number_t hw)
-{
-	struct advk_pcie *pcie = domain->host_data;
-
-	irq_set_chip_and_handler(virq, &pcie->msi_irq_chip,
-				 handle_simple_irq);
-
-	return 0;
-}
-
-static const struct irq_domain_ops advk_pcie_msi_irq_ops = {
-	.map = advk_pcie_msi_map,
+static const struct irq_domain_ops advk_msi_domain_ops = {
+	.alloc = advk_msi_irq_domain_alloc,
+	.free = advk_msi_irq_domain_free,
 };
 
 static void advk_pcie_irq_mask(struct irq_data *d)
···
 {
 	struct device *dev = &pcie->pdev->dev;
 	struct device_node *node = dev->of_node;
-	struct irq_chip *msi_irq_chip;
-	struct msi_controller *msi;
+	struct irq_chip *bottom_ic, *msi_ic;
+	struct msi_domain_info *msi_di;
 	phys_addr_t msi_msg_phys;
-	int ret;
-
-	msi_irq_chip = &pcie->msi_irq_chip;
-
-	msi_irq_chip->name = devm_kasprintf(dev, GFP_KERNEL, "%s-msi",
-					    dev_name(dev));
-	if (!msi_irq_chip->name)
-		return -ENOMEM;
-
-	msi_irq_chip->irq_enable = pci_msi_unmask_irq;
-	msi_irq_chip->irq_disable = pci_msi_mask_irq;
-	msi_irq_chip->irq_mask = pci_msi_mask_irq;
-	msi_irq_chip->irq_unmask = pci_msi_unmask_irq;
-
-	msi = &pcie->msi;
-
-	msi->setup_irq = advk_pcie_setup_msi_irq;
-	msi->teardown_irq = advk_pcie_teardown_msi_irq;
-	msi->of_node = node;
 
 	mutex_init(&pcie->msi_used_lock);
+
+	bottom_ic = &pcie->msi_bottom_irq_chip;
+
+	bottom_ic->name = "MSI";
+	bottom_ic->irq_compose_msi_msg = advk_msi_irq_compose_msi_msg;
+	bottom_ic->irq_set_affinity = advk_msi_set_affinity;
+
+	msi_ic = &pcie->msi_irq_chip;
+	msi_ic->name = "advk-MSI";
+
+	msi_di = &pcie->msi_domain_info;
+	msi_di->flags = MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS |
+		MSI_FLAG_MULTI_PCI_MSI;
+	msi_di->chip = msi_ic;
 
 	msi_msg_phys = virt_to_phys(&pcie->msi_msg);
 
···
 	advk_writel(pcie, upper_32_bits(msi_msg_phys),
 		    PCIE_MSI_ADDR_HIGH_REG);
 
-	pcie->msi_domain =
+	pcie->msi_inner_domain =
 		irq_domain_add_linear(NULL, MSI_IRQ_NUM,
-				      &advk_pcie_msi_irq_ops, pcie);
-	if (!pcie->msi_domain)
+				      &advk_msi_domain_ops, pcie);
+	if (!pcie->msi_inner_domain)
 		return -ENOMEM;
 
-	ret = of_pci_msi_chip_add(msi);
-	if (ret < 0) {
-		irq_domain_remove(pcie->msi_domain);
-		return ret;
+	pcie->msi_domain =
+		pci_msi_create_irq_domain(of_node_to_fwnode(node),
+					  msi_di, pcie->msi_inner_domain);
+	if (!pcie->msi_domain) {
+		irq_domain_remove(pcie->msi_inner_domain);
+		return -ENOMEM;
 	}
 
 	return 0;
···
 
 static void advk_pcie_remove_msi_irq_domain(struct advk_pcie *pcie)
 {
-	of_pci_msi_chip_remove(&pcie->msi);
 	irq_domain_remove(pcie->msi_domain);
+	irq_domain_remove(pcie->msi_inner_domain);
 }
 
 static int advk_pcie_init_irq_domain(struct advk_pcie *pcie)
···
 	struct advk_pcie *pcie;
 	struct resource *res;
 	struct pci_bus *bus, *child;
-	struct msi_controller *msi;
-	struct device_node *msi_node;
 	int ret, irq;
 
 	pcie = devm_kzalloc(dev, sizeof(struct advk_pcie), GFP_KERNEL);
···
 		return ret;
 	}
 
-	msi_node = of_parse_phandle(dev->of_node, "msi-parent", 0);
-	if (msi_node)
-		msi = of_pci_find_msi_chip_by_node(msi_node);
-	else
-		msi = NULL;
-
-	bus = pci_scan_root_bus_msi(dev, 0, &advk_pcie_ops,
-				    pcie, &pcie->resources, &pcie->msi);
+	bus = pci_scan_root_bus(dev, 0, &advk_pcie_ops,
+				pcie, &pcie->resources);
 	if (!bus) {
 		advk_pcie_remove_msi_irq_domain(pcie);
 		advk_pcie_remove_irq_domain(pcie);

drivers/pci/host/pci-ftpci100.c

···
+/*
+ * Support for Faraday Technology FTPC100 PCI Controller
+ *
+ * Copyright (C) 2017 Linus Walleij <[e-mail]>
+ *
+ * Based on the out-of-tree OpenWRT patch for Cortina Gemini:
+ * Copyright (C) 2009 Janos Laube <[e-mail]>
+ * Copyright (C) 2009 Paulius Zaleckas <[e-mail]>
+ * Based on SL2312 PCI controller code
+ * Storlink (C) 2003
+ */
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/of_irq.h>
+#include <linux/of_pci.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/irqdomain.h>
+#include <linux/irqchip/chained_irq.h>
+#include <linux/bitops.h>
+#include <linux/irq.h>
+
+/*
+ * Special configuration registers directly in the first few words
+ * in I/O space.
+ */
+#define PCI_IOSIZE	0x00
+#define PCI_PROT	0x04 /* AHB protection */
+#define PCI_CTRL	0x08 /* PCI control signal */
+#define PCI_SOFTRST	0x10 /* Soft reset counter and response error enable */
+#define PCI_CONFIG	0x28 /* PCI configuration command register */
+#define PCI_DATA	0x2C
+
+#define FARADAY_PCI_PMC			0x40 /* Power management control */
+#define FARADAY_PCI_PMCSR		0x44 /* Power management status */
+#define FARADAY_PCI_CTRL1		0x48 /* Control register 1 */
+#define FARADAY_PCI_CTRL2		0x4C /* Control register 2 */
+#define FARADAY_PCI_MEM1_BASE_SIZE	0x50 /* Memory base and size #1 */
+#define FARADAY_PCI_MEM2_BASE_SIZE	0x54 /* Memory base and size #2 */
+#define FARADAY_PCI_MEM3_BASE_SIZE	0x58 /* Memory base and size #3 */
+
+/* Bits 31..28 gives INTD..INTA status */
+#define PCI_CTRL2_INTSTS_SHIFT		28
+#define PCI_CTRL2_INTMASK_CMDERR	BIT(27)
+#define PCI_CTRL2_INTMASK_PARERR	BIT(26)
+/* Bits 25..22 masks INTD..INTA */
+#define PCI_CTRL2_INTMASK_SHIFT		22
+#define PCI_CTRL2_INTMASK_MABRT_RX	BIT(21)
+#define PCI_CTRL2_INTMASK_TABRT_RX	BIT(20)
+#define PCI_CTRL2_INTMASK_TABRT_TX	BIT(19)
+#define PCI_CTRL2_INTMASK_RETRY4	BIT(18)
+#define PCI_CTRL2_INTMASK_SERR_RX	BIT(17)
+#define PCI_CTRL2_INTMASK_PERR_RX	BIT(16)
+/* Bit 15 reserved */
+#define PCI_CTRL2_MSTPRI_REQ6		BIT(14)
+#define PCI_CTRL2_MSTPRI_REQ5		BIT(13)
+#define PCI_CTRL2_MSTPRI_REQ4		BIT(12)
+#define PCI_CTRL2_MSTPRI_REQ3		BIT(11)
+#define PCI_CTRL2_MSTPRI_REQ2		BIT(10)
+#define PCI_CTRL2_MSTPRI_REQ1		BIT(9)
+#define PCI_CTRL2_MSTPRI_REQ0		BIT(8)
+/* Bits 7..4 reserved */
+/* Bits 3..0 TRDYW */
+
+/*
+ * Memory configs:
+ * Bit 31..20 defines the PCI side memory base
+ * Bit 19..16 (4 bits) defines the size per below
+ */
+#define FARADAY_PCI_MEMBASE_MASK	0xfff00000
+#define FARADAY_PCI_MEMSIZE_1MB		0x0
+#define FARADAY_PCI_MEMSIZE_2MB		0x1
+#define FARADAY_PCI_MEMSIZE_4MB		0x2
+#define FARADAY_PCI_MEMSIZE_8MB		0x3
+#define FARADAY_PCI_MEMSIZE_16MB	0x4
+#define FARADAY_PCI_MEMSIZE_32MB	0x5
+#define FARADAY_PCI_MEMSIZE_64MB	0x6
+#define FARADAY_PCI_MEMSIZE_128MB	0x7
+#define FARADAY_PCI_MEMSIZE_256MB	0x8
+#define FARADAY_PCI_MEMSIZE_512MB	0x9
+#define FARADAY_PCI_MEMSIZE_1GB		0xa
+#define FARADAY_PCI_MEMSIZE_2GB		0xb
+#define FARADAY_PCI_MEMSIZE_SHIFT	16
+
+/*
+ * The DMA base is set to 0x0 for all memory segments, it reflects the
+ * fact that the memory of the host system starts at 0x0.
+ */
+#define FARADAY_PCI_DMA_MEM1_BASE	0x00000000
+#define FARADAY_PCI_DMA_MEM2_BASE	0x00000000
+#define FARADAY_PCI_DMA_MEM3_BASE	0x00000000
+
+/* Defines for PCI configuration command register */
+#define PCI_CONF_ENABLE		BIT(31)
+#define PCI_CONF_WHERE(r)	((r) & 0xFC)
+#define PCI_CONF_BUS(b)		(((b) & 0xFF) << 16)
+#define PCI_CONF_DEVICE(d)	(((d) & 0x1F) << 11)
+#define PCI_CONF_FUNCTION(f)	(((f) & 0x07) << 8)
+
+/**
+ * struct faraday_pci_variant - encodes IP block differences
+ * @cascaded_irq: this host has cascaded IRQs from an interrupt controller
+ *	embedded in the host bridge.
+ */
+struct faraday_pci_variant {
+	bool cascaded_irq;
+};
+
+struct faraday_pci {
+	struct device *dev;
+	void __iomem *base;
+	struct irq_domain *irqdomain;
+	struct pci_bus *bus;
+};
+
+static int faraday_res_to_memcfg(resource_size_t mem_base,
+				 resource_size_t mem_size, u32 *val)
+{
+	u32 outval;
+
+	switch (mem_size) {
+	case SZ_1M:
+		outval = FARADAY_PCI_MEMSIZE_1MB;
+		break;
+	case SZ_2M:
+		outval = FARADAY_PCI_MEMSIZE_2MB;
+		break;
+	case SZ_4M:
+		outval = FARADAY_PCI_MEMSIZE_4MB;
+		break;
+	case SZ_8M:
+		outval = FARADAY_PCI_MEMSIZE_8MB;
+		break;
+	case SZ_16M:
+		outval = FARADAY_PCI_MEMSIZE_16MB;
+		break;
+	case SZ_32M:
+		outval = FARADAY_PCI_MEMSIZE_32MB;
+		break;
+	case SZ_64M:
+		outval = FARADAY_PCI_MEMSIZE_64MB;
+		break;
+	case SZ_128M:
+		outval = FARADAY_PCI_MEMSIZE_128MB;
+		break;
+	case SZ_256M:
+		outval = FARADAY_PCI_MEMSIZE_256MB;
+		break;
+	case SZ_512M:
+		outval = FARADAY_PCI_MEMSIZE_512MB;
+		break;
+	case SZ_1G:
+		outval = FARADAY_PCI_MEMSIZE_1GB;
+		break;
+	case SZ_2G:
+		outval = FARADAY_PCI_MEMSIZE_2GB;
+		break;
+	default:
+		return -EINVAL;
+	}
+	outval <<= FARADAY_PCI_MEMSIZE_SHIFT;
+
+	/* This is probably not good */
+	if (mem_base & ~(FARADAY_PCI_MEMBASE_MASK))
+		pr_warn("truncated PCI memory base\n");
+	/* Translate to bridge side address space */
+	outval |= (mem_base & FARADAY_PCI_MEMBASE_MASK);
+	pr_debug("Translated pci base @%pap, size %pap to config %08x\n",
+		 &mem_base, &mem_size, outval);
+
+	*val = outval;
+	return 0;
+}
+
+static int faraday_pci_read_config(struct pci_bus *bus, unsigned int fn,
+				   int config, int size, u32 *value)
+{
+	struct faraday_pci *p = bus->sysdata;
+
+	writel(PCI_CONF_BUS(bus->number) |
+			PCI_CONF_DEVICE(PCI_SLOT(fn)) |
+			PCI_CONF_FUNCTION(PCI_FUNC(fn)) |
+			PCI_CONF_WHERE(config) |
+			PCI_CONF_ENABLE,
+			p->base + PCI_CONFIG);
+
+	*value = readl(p->base + PCI_DATA);
+
+	if (size == 1)
+		*value = (*value >> (8 * (config & 3))) & 0xFF;
+	else if (size == 2)
+		*value = (*value >> (8 * (config & 3))) & 0xFFFF;
+
+	dev_dbg(&bus->dev,
+		"[read]  slt: %.2d, fnc: %d, cnf: 0x%.2X, val (%d bytes): 0x%.8X\n",
+		PCI_SLOT(fn), PCI_FUNC(fn), config, size, *value);
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int faraday_pci_write_config(struct pci_bus *bus, unsigned int fn,
+				    int config, int size, u32 value)
+{
+	struct faraday_pci *p = bus->sysdata;
+	int ret = PCIBIOS_SUCCESSFUL;
+
+	dev_dbg(&bus->dev,
+		"[write] slt: %.2d, fnc: %d, cnf: 0x%.2X, val (%d bytes): 0x%.8X\n",
+		PCI_SLOT(fn), PCI_FUNC(fn), config, size, value);
+
+	writel(PCI_CONF_BUS(bus->number) |
+			PCI_CONF_DEVICE(PCI_SLOT(fn)) |
+			PCI_CONF_FUNCTION(PCI_FUNC(fn)) |
+			PCI_CONF_WHERE(config) |
+			PCI_CONF_ENABLE,
+			p->base + PCI_CONFIG);
+
+	switch (size) {
+	case 4:
+		writel(value, p->base + PCI_DATA);
+		break;
+	case 2:
+		writew(value, p->base + PCI_DATA + (config & 3));
+		break;
+	case 1:
+		writeb(value, p->base + PCI_DATA + (config & 3));
+		break;
+	default:
+		ret = PCIBIOS_BAD_REGISTER_NUMBER;
+	}
+
+	return ret;
+}
+
+static struct pci_ops faraday_pci_ops = {
+	.read	= faraday_pci_read_config,
+	.write	= faraday_pci_write_config,
+};
+
+static void faraday_pci_ack_irq(struct irq_data *d)
+{
+	struct faraday_pci *p = irq_data_get_irq_chip_data(d);
+	unsigned int reg;
+
+	faraday_pci_read_config(p->bus, 0, FARADAY_PCI_CTRL2, 4, &reg);
+	reg &= ~(0xF << PCI_CTRL2_INTSTS_SHIFT);
+	reg |= BIT(irqd_to_hwirq(d) + PCI_CTRL2_INTSTS_SHIFT);
+	faraday_pci_write_config(p->bus, 0, FARADAY_PCI_CTRL2, 4, reg);
+}
+
+static void faraday_pci_mask_irq(struct irq_data *d)
+{
+	struct faraday_pci *p = irq_data_get_irq_chip_data(d);
+	unsigned int reg;
+
+	faraday_pci_read_config(p->bus, 0, FARADAY_PCI_CTRL2, 4, &reg);
+	reg &= ~((0xF << PCI_CTRL2_INTSTS_SHIFT)
+		 | BIT(irqd_to_hwirq(d) + PCI_CTRL2_INTMASK_SHIFT));
+	faraday_pci_write_config(p->bus, 0, FARADAY_PCI_CTRL2, 4, reg);
+}
+
+static void faraday_pci_unmask_irq(struct irq_data *d)
+{
+	struct faraday_pci *p = irq_data_get_irq_chip_data(d);
+	unsigned int reg;
+
+	faraday_pci_read_config(p->bus, 0, FARADAY_PCI_CTRL2, 4, &reg);
+	reg &= ~(0xF << PCI_CTRL2_INTSTS_SHIFT);
+	reg |= BIT(irqd_to_hwirq(d) + PCI_CTRL2_INTMASK_SHIFT);
+	faraday_pci_write_config(p->bus, 0, FARADAY_PCI_CTRL2, 4, reg);
+}
+
+static void faraday_pci_irq_handler(struct irq_desc *desc)
+{
+	struct faraday_pci *p = irq_desc_get_handler_data(desc);
+	struct irq_chip *irqchip = irq_desc_get_chip(desc);
+	unsigned int irq_stat, reg, i;
+
+	faraday_pci_read_config(p->bus, 0, FARADAY_PCI_CTRL2, 4, &reg);
+	irq_stat = reg >> PCI_CTRL2_INTSTS_SHIFT;
+
+	chained_irq_enter(irqchip, desc);
+
+	for (i = 0; i < 4; i++) {
+		if ((irq_stat & BIT(i)) == 0)
+			continue;
+		generic_handle_irq(irq_find_mapping(p->irqdomain, i));
+	}
+
+	chained_irq_exit(irqchip, desc);
+}
+
+static struct irq_chip faraday_pci_irq_chip = {
+	.name = "PCI",
+	.irq_ack = faraday_pci_ack_irq,
+	.irq_mask = faraday_pci_mask_irq,
+	.irq_unmask = faraday_pci_unmask_irq,
+};
+
+static int faraday_pci_irq_map(struct irq_domain *domain, unsigned int irq,
+			       irq_hw_number_t hwirq)
+{
+	irq_set_chip_and_handler(irq, &faraday_pci_irq_chip, handle_level_irq);
+	irq_set_chip_data(irq, domain->host_data);
+
+	return 0;
+}
+
+static const struct irq_domain_ops faraday_pci_irqdomain_ops = {
+	.map = faraday_pci_irq_map,
+};
+
+static int faraday_pci_setup_cascaded_irq(struct faraday_pci *p)
+{
+	struct device_node *intc = of_get_next_child(p->dev->of_node, NULL);
+	int irq;
+	int i;
+
+	if (!intc) {
+		dev_err(p->dev, "missing child interrupt-controller node\n");
+		return -EINVAL;
+	}
+
+	/* All PCI IRQs cascade off this one */
+	irq = of_irq_get(intc, 0);
+	if (!irq) {
+		dev_err(p->dev, "failed to get parent IRQ\n");
+		return -EINVAL;
+	}
+
+	p->irqdomain = irq_domain_add_linear(intc, 4,
+					     &faraday_pci_irqdomain_ops, p);
+	if (!p->irqdomain) {
+		dev_err(p->dev, "failed to create Gemini PCI IRQ domain\n");
+		return -EINVAL;
+	}
+
+	irq_set_chained_handler_and_data(irq, faraday_pci_irq_handler, p);
+
+	for (i = 0; i < 4; i++)
+		irq_create_mapping(p->irqdomain, i);
+
+	return 0;
+}
+
+static int pci_dma_range_parser_init(struct of_pci_range_parser *parser,
+				     struct device_node *node)
+{
+	const int na = 3, ns = 2;
+	int rlen;
+
+	parser->node = node;
+	parser->pna = of_n_addr_cells(node);
+	parser->np = parser->pna + na + ns;
+
+	parser->range = of_get_property(node, "dma-ranges", &rlen);
+	if (!parser->range)
+		return -ENOENT;
+	parser->end = parser->range + rlen / sizeof(__be32);
+
+	return 0;
+}
+
+static int faraday_pci_parse_map_dma_ranges(struct faraday_pci *p,
+					    struct device_node *np)
+{
+	struct of_pci_range range;
+	struct of_pci_range_parser parser;
+	struct device *dev = p->dev;
+	u32 confreg[3] = {
+		FARADAY_PCI_MEM1_BASE_SIZE,
+		FARADAY_PCI_MEM2_BASE_SIZE,
+		FARADAY_PCI_MEM3_BASE_SIZE,
+	};
+	int i = 0;
+	u32 val;
+
+	if (pci_dma_range_parser_init(&parser, np)) {
+		dev_err(dev, "missing dma-ranges property\n");
+		return -EINVAL;
+	}
+
+	/*
+	 * Get the dma-ranges from the device tree
+	 */
+	for_each_of_pci_range(&parser, &range) {
+		u64 end = range.pci_addr + range.size - 1;
+		int ret;
+
+		ret = faraday_res_to_memcfg(range.pci_addr, range.size, &val);
+		if (ret) {
+			dev_err(dev,
+				"DMA range %d: illegal MEM resource size\n", i);
+			return -EINVAL;
+		}
+
+		dev_info(dev, "DMA MEM%d BASE: 0x%016llx -> 0x%016llx config %08x\n",
+			 i + 1, range.pci_addr, end, val);
+		if (i <= 2) {
+			faraday_pci_write_config(p->bus, 0, confreg[i],
+						 4, val);
+		} else {
+			dev_err(dev, "ignore extraneous dma-range %d\n", i);
+			break;
+		}
+
+		i++;
+	}
+
+	return 0;
+}
+
+static int faraday_pci_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	const struct faraday_pci_variant *variant =
+		of_device_get_match_data(dev);
+	struct resource *regs;
+	resource_size_t io_base;
+	struct resource_entry *win;
+	struct faraday_pci *p;
+	struct resource *mem;
+	struct resource *io;
+	struct pci_host_bridge *host;
+	int ret;
+	u32 val;
+	LIST_HEAD(res);
+
+	host = pci_alloc_host_bridge(sizeof(*p));
+	if (!host)
+		return -ENOMEM;
+
+	host->dev.parent = dev;
+	host->ops = &faraday_pci_ops;
+	host->busnr = 0;
+	host->msi = NULL;
+	p = pci_host_bridge_priv(host);
+	host->sysdata = p;
+	p->dev = dev;
+
+	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	p->base = devm_ioremap_resource(dev, regs);
+	if (IS_ERR(p->base))
+		return PTR_ERR(p->base);
+
+	ret = of_pci_get_host_bridge_resources(dev->of_node, 0, 0xff,
+					       &res, &io_base);
+	if (ret)
+		return ret;
+
+	ret = devm_request_pci_bus_resources(dev, &res);
+	if (ret)
+		return ret;
+
+	/* Get the I/O and memory ranges from DT */
+	resource_list_for_each_entry(win, &res) {
+		switch (resource_type(win->res)) {
+		case IORESOURCE_IO:
+			io = win->res;
+			io->name = "Gemini PCI I/O";
+			if (!faraday_res_to_memcfg(io->start - win->offset,
+						   resource_size(io), &val)) {
+				/* setup I/O space size */
+				writel(val, p->base + PCI_IOSIZE);
+			} else {
+				dev_err(dev, "illegal IO mem size\n");
+				return -EINVAL;
+			}
+			ret = pci_remap_iospace(io, io_base);
+			if (ret) {
+				dev_warn(dev, "error %d: failed to map resource %pR\n",
+					 ret, io);
+				continue;
+			}
+			break;
+		case IORESOURCE_MEM:
+			mem = win->res;
+			mem->name = "Gemini PCI MEM";
+			break;
+		case IORESOURCE_BUS:
+			break;
+		default:
+			break;
+		}
+	}
+
+	/* Setup hostbridge */
+	val = readl(p->base + PCI_CTRL);
+	val |= PCI_COMMAND_IO;
+	val |= PCI_COMMAND_MEMORY;
+	val |= PCI_COMMAND_MASTER;
+	writel(val, p->base + PCI_CTRL);
+
+	list_splice_init(&res, &host->windows);
+	ret = pci_register_host_bridge(host);
+	if (ret) {
+		dev_err(dev, "failed to register host: %d\n", ret);
+		return ret;
+	}
+	p->bus = host->bus;
+
+	/* Mask and clear all interrupts */
+	faraday_pci_write_config(p->bus, 0, FARADAY_PCI_CTRL2 + 2, 2, 0xF000);
+	if (variant->cascaded_irq) {
+		ret = faraday_pci_setup_cascaded_irq(p);
+		if (ret) {
+			dev_err(dev, "failed to setup cascaded IRQ\n");
+			return ret;
+		}
+	}
+
+	ret = faraday_pci_parse_map_dma_ranges(p, dev->of_node);
+	if (ret)
+		return ret;
+
+	pci_scan_child_bus(p->bus);
+	pci_fixup_irqs(pci_common_swizzle, of_irq_parse_and_map_pci);
+	pci_bus_assign_resources(p->bus);
+	pci_bus_add_devices(p->bus);
+	pci_free_resource_list(&res);
+
+	return 0;
+}
+
+/*
+ * We encode bridge variants here, we have at least two so it doesn't
+ * hurt to have infrastructure to encompass future variants as well.
+ */
+const struct faraday_pci_variant faraday_regular = {
+	.cascaded_irq = true,
+};
+
+const struct faraday_pci_variant faraday_dual = {
+	.cascaded_irq = false,
+};
+
+static const struct of_device_id faraday_pci_of_match[] = {
+	{
+		.compatible = "faraday,ftpci100",
+		.data = &faraday_regular,
+	},
+	{
+		.compatible = "faraday,ftpci100-dual",
+		.data = &faraday_dual,
+	},
+	{},
+};
+
+static struct platform_driver faraday_pci_driver = {
+	.driver = {
+		.name = "ftpci100",
+		.of_match_table = of_match_ptr(faraday_pci_of_match),
+		.suppress_bind_attrs = true,
+	},
+	.probe  = faraday_pci_probe,
+};
+builtin_platform_driver(faraday_pci_driver);

drivers/pci/host/pci-host-generic.c

···
 	.driver = {
 		.name = "pci-host-generic",
 		.of_match_table = gen_pci_of_match,
+		.suppress_bind_attrs = true,
 	},
 	.probe = gen_pci_probe,
 };

drivers/pci/host/pci-hyperv.c

···
 #include <asm/apic.h>
 #include <linux/msi.h>
 #include <linux/hyperv.h>
+#include <linux/refcount.h>
 #include <asm/mshyperv.h>
 
 /*
···
 	PCI_PROTOCOL_VERSION_CURRENT = PCI_PROTOCOL_VERSION_1_1
 };
 
+#define CPU_AFFINITY_ALL	-1ULL
 #define PCI_CONFIG_MMIO_LENGTH	0x2000
 #define CFG_PAGE_OFFSET 0x1000
 #define CFG_PAGE_SIZE (PCI_CONFIG_MMIO_LENGTH - CFG_PAGE_OFFSET)
···
 	hv_pcibus_init = 0,
 	hv_pcibus_probed,
 	hv_pcibus_installed,
+	hv_pcibus_removed,
 	hv_pcibus_maximum
 };
 
···
 struct hv_pci_dev {
 	/* List protected by pci_rescan_remove_lock */
 	struct list_head list_entry;
-	atomic_t refs;
+	refcount_t refs;
 	enum hv_pcichild_state state;
 	struct pci_function_description desc;
 	bool reported_missing;
···
 		hv_int_desc_free(hpdev, int_desc);
 	}
 
-	int_desc = kzalloc(sizeof(*int_desc), GFP_KERNEL);
+	int_desc = kzalloc(sizeof(*int_desc), GFP_ATOMIC);
 	if (!int_desc)
 		goto drop_reference;
 
···
 	 * processors because Hyper-V only supports 64 in a guest.
 	 */
 	affinity = irq_data_get_affinity_mask(data);
-	for_each_cpu_and(cpu, affinity, cpu_online_mask) {
-		int_pkt->int_desc.cpu_mask |=
-			(1ULL << vmbus_cpu_number_to_vp_number(cpu));
+	if (cpumask_weight(affinity) >= 32) {
+		int_pkt->int_desc.cpu_mask = CPU_AFFINITY_ALL;
+	} else {
+		for_each_cpu_and(cpu, affinity, cpu_online_mask) {
+			int_pkt->int_desc.cpu_mask |=
+				(1ULL << vmbus_cpu_number_to_vp_number(cpu));
+		}
 	}
 
 	ret = vmbus_sendpacket(hpdev->hbus->hdev->channel, int_pkt,
···
 	hbus->pci_bus->msi = &hbus->msi_chip;
 	hbus->pci_bus->msi->dev = &hbus->hdev->device;
 
+	pci_lock_rescan_remove();
 	pci_scan_child_bus(hbus->pci_bus);
 	pci_bus_assign_resources(hbus->pci_bus);
 	pci_bus_add_devices(hbus->pci_bus);
+	pci_unlock_rescan_remove();
 	hbus->state = hv_pcibus_installed;
 	return 0;
 }
···
 static void get_pcichild(struct hv_pci_dev *hpdev,
 			    enum hv_pcidev_ref_reason reason)
 {
-	atomic_inc(&hpdev->refs);
+	refcount_inc(&hpdev->refs);
 }
 
 static void put_pcichild(struct hv_pci_dev *hpdev,
 			    enum hv_pcidev_ref_reason reason)
 {
-	if (atomic_dec_and_test(&hpdev->refs))
+	if (refcount_dec_and_test(&hpdev->refs))
 		kfree(hpdev);
 }
 
···
 	wait_for_completion(&comp_pkt.host_event);
 
 	hpdev->desc = *desc;
-	get_pcichild(hpdev, hv_pcidev_ref_initial);
+	refcount_set(&hpdev->refs, 1);
 	get_pcichild(hpdev, hv_pcidev_ref_childlist);
 	spin_lock_irqsave(&hbus->device_list_lock, flags);
 
···
 		put_pcichild(hpdev, hv_pcidev_ref_initial);
 	}
 
-	/* Tell the core to rescan bus because there may have been changes. */
-	if (hbus->state == hv_pcibus_installed) {
+	switch(hbus->state) {
+	case hv_pcibus_installed:
+		/*
+		* Tell the core to rescan bus
+		* because there may have been changes.
+		*/
 		pci_lock_rescan_remove();
 		pci_scan_child_bus(hbus->pci_bus);
 		pci_unlock_rescan_remove();
-	} else {
+		break;
+
+	case hv_pcibus_init:
+	case hv_pcibus_probed:
 		survey_child_resources(hbus);
+		break;
+
+	default:
+		break;
 	}
 
 	up(&hbus->enum_sem);
···
 	pdev = pci_get_domain_bus_and_slot(hpdev->hbus->sysdata.domain, 0,
 					   wslot);
 	if (pdev) {
+		pci_lock_rescan_remove();
 		pci_stop_and_remove_bus_device(pdev);
 		pci_dev_put(pdev);
+		pci_unlock_rescan_remove();
 	}
 
 	spin_lock_irqsave(&hpdev->hbus->device_list_lock, flags);
···
 	hbus = kzalloc(sizeof(*hbus), GFP_KERNEL);
 	if (!hbus)
 		return -ENOMEM;
+	hbus->state = hv_pcibus_init;
 
 	/*
 	 * The PCI bus "domain" is what is called "segment" in ACPI and
···
 		pci_stop_root_bus(hbus->pci_bus);
 		pci_remove_root_bus(hbus->pci_bus);
 		pci_unlock_rescan_remove();
+		hbus->state = hv_pcibus_removed;
 	}
 
 	hv_pci_bus_exit(hdev);

drivers/pci/host/pci-mvebu.c

···
 		 * If the mask is 0xffff0000, then we only want to write
 		 * the link control register, rather than clearing the
 		 * RW1C bits in the link status register.  Mask out the
-		 * status register bits.
+		 * RW1C status register bits.
 		 */
 		if (mask == 0xffff0000)
-			value &= 0xffff;
+			value &= ~((PCI_EXP_LNKSTA_LABS |
+				    PCI_EXP_LNKSTA_LBMS) << 16);
 
 		mvebu_writel(port, value, PCIE_CAP_PCIEXP + PCI_EXP_LNKCTL);
 		break;
···
 	}
 
 	return -ENOENT;
-}
-
-static void mvebu_pcie_msi_enable(struct mvebu_pcie *pcie)
-{
-	struct device_node *msi_node;
-
-	msi_node = of_parse_phandle(pcie->pdev->dev.of_node,
-				    "msi-parent", 0);
-	if (!msi_node)
-		return;
-
-	pcie->msi = of_pci_find_msi_chip_by_node(msi_node);
-	of_node_put(msi_node);
-
-	if (pcie->msi)
-		pcie->msi->dev = &pcie->pdev->dev;
 }
 
 #ifdef CONFIG_PM_SLEEP
···
 	for (i = 0; i < (IO_SPACE_LIMIT - SZ_64K); i += SZ_64K)
 		pci_ioremap_io(i, pcie->io.start + i);
 
-	mvebu_pcie_msi_enable(pcie);
 	mvebu_pcie_enable(pcie);
 
 	platform_set_drvdata(pdev, pcie);

drivers/pci/host/pci-tegra.c

···
 						   unsigned int busnr)
 {
 	struct device *dev = pcie->dev;
-	pgprot_t prot = pgprot_device(PAGE_KERNEL);
+	pgprot_t prot = pgprot_noncached(PAGE_KERNEL);
 	phys_addr_t cs = pcie->cs->start;
 	struct tegra_pcie_bus *bus;
 	unsigned int i;
···
 		rp->pcie = pcie;
 		rp->np = port;
 
-		rp->base = devm_ioremap_resource(dev, &rp->regs);
+		rp->base = devm_pci_remap_cfg_resource(dev, &rp->regs);
 		if (IS_ERR(rp->base))
 			return PTR_ERR(rp->base);
 

drivers/pci/host/pci-thunder-ecam.c

···
 	.driver = {
 		.name = KBUILD_MODNAME,
 		.of_match_table = thunder_ecam_of_match,
+		.suppress_bind_attrs = true,
 	},
 	.probe = thunder_ecam_probe,
 };

drivers/pci/host/pci-thunder-pem.c

···
 	.driver = {
 		.name = KBUILD_MODNAME,
 		.of_match_table = thunder_pem_of_match,
+		.suppress_bind_attrs = true,
 	},
 	.probe = thunder_pem_probe,
 };

drivers/pci/host/pci-versatile.c

···
 		return PTR_ERR(versatile_cfg_base[0]);
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 2);
-	versatile_cfg_base[1] = devm_ioremap_resource(&pdev->dev, res);
+	versatile_cfg_base[1] = devm_pci_remap_cfg_resource(&pdev->dev,
+							    res);
 	if (IS_ERR(versatile_cfg_base[1]))
 		return PTR_ERR(versatile_cfg_base[1]);
 
···
 	.driver = {
 		.name = "versatile-pci",
 		.of_match_table = versatile_pci_of_match,
+		.suppress_bind_attrs = true,
 	},
 	.probe = versatile_pci_probe,
 };

drivers/pci/host/pci-xgene.c

···
 		dev_err(dev, "can't get CSR resource\n");
 		return ret;
 	}
-	port->csr_base = devm_ioremap_resource(dev, &csr);
+	port->csr_base = devm_pci_remap_cfg_resource(dev, &csr);
 	if (IS_ERR(port->csr_base))
 		return PTR_ERR(port->csr_base);
 
···
 	struct resource *res;
 
 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "csr");
-	port->csr_base = devm_ioremap_resource(dev, res);
+	port->csr_base = devm_pci_remap_cfg_resource(dev, res);
 	if (IS_ERR(port->csr_base))
 		return PTR_ERR(port->csr_base);
 
···
 	.driver = {
 		   .name = "xgene-pcie",
 		   .of_match_table = of_match_ptr(xgene_pcie_match_table),
+		   .suppress_bind_attrs = true,
 	},
 	.probe = xgene_pcie_probe_bridge,
 };

drivers/pci/host/pcie-iproc-platform.c

···
 		return ret;
 	}
 
-	pcie->base = devm_ioremap(dev, reg.start, resource_size(&reg));
+	pcie->base = devm_pci_remap_cfgspace(dev, reg.start,
+					     resource_size(&reg));
 	if (!pcie->base) {
 		dev_err(dev, "unable to map controller registers\n");
 		return -ENOMEM;

drivers/pci/host/pcie-rockchip.c

···
 #include <linux/irqdomain.h>
 #include <linux/kernel.h>
 #include <linux/mfd/syscon.h>
+#include <linux/module.h>
 #include <linux/of_address.h>
 #include <linux/of_device.h>
 #include <linux/of_pci.h>
···
 	int	link_gen;
 	struct	device *dev;
 	struct	irq_domain *irq_domain;
-	u32     io_size;
 	int     offset;
+	struct pci_bus *root_bus;
+	struct resource *io;
 	phys_addr_t io_bus_addr;
+	u32     io_size;
 	void    __iomem *msg_region;
 	u32     mem_size;
 	phys_addr_t msg_bus_addr;
···
 
 static void rockchip_pcie_set_power_limit(struct rockchip_pcie *rockchip)
 {
-	u32 status, curr, scale, power;
+	int curr;
+	u32 status, scale, power;
 
 	if (IS_ERR(rockchip->vpcie3v3))
 		return;
···
 	 * to the actual power supply.
 	 */
 	curr = regulator_get_current_limit(rockchip->vpcie3v3);
-	if (curr > 0) {
-		scale = 3; /* 0.001x */
-		curr = curr / 1000; /* convert to mA */
-		power = (curr * 3300) / 1000; /* milliwatt */
-		while (power > PCIE_RC_CONFIG_DCR_CSPL_LIMIT) {
-			if (!scale) {
-				dev_warn(rockchip->dev, "invalid power supply\n");
-				return;
-			}
-			scale--;
-			power = power / 10;
-		}
+	if (curr <= 0)
+		return;
 
-		status = rockchip_pcie_read(rockchip, PCIE_RC_CONFIG_DCR);
-		status |= (power << PCIE_RC_CONFIG_DCR_CSPL_SHIFT) |
-			  (scale << PCIE_RC_CONFIG_DCR_CPLS_SHIFT);
-		rockchip_pcie_write(rockchip, status, PCIE_RC_CONFIG_DCR);
+	scale = 3; /* 0.001x */
+	curr = curr / 1000; /* convert to mA */
+	power = (curr * 3300) / 1000; /* milliwatt */
+	while (power > PCIE_RC_CONFIG_DCR_CSPL_LIMIT) {
+		if (!scale) {
+			dev_warn(rockchip->dev, "invalid power supply\n");
+			return;
+		}
+		scale--;
+		power = power / 10;
 	}
+
+	status = rockchip_pcie_read(rockchip, PCIE_RC_CONFIG_DCR);
+	status |= (power << PCIE_RC_CONFIG_DCR_CSPL_SHIFT) |
+		  (scale << PCIE_RC_CONFIG_DCR_CPLS_SHIFT);
+	rockchip_pcie_write(rockchip, status, PCIE_RC_CONFIG_DCR);
 }
 
 /**
···
 
 	/* Set RC's clock architecture as common clock */
 	status = rockchip_pcie_read(rockchip, PCIE_RC_CONFIG_LCS);
-	status |= PCI_EXP_LNKCTL_CCC;
+	status |= PCI_EXP_LNKSTA_SLC << 16;
+	rockchip_pcie_write(rockchip, status, PCIE_RC_CONFIG_LCS);
+
+	/* Set RC's RCB to 128 */
+	status = rockchip_pcie_read(rockchip, PCIE_RC_CONFIG_LCS);
+	status |= PCI_EXP_LNKCTL_RCB;
 	rockchip_pcie_write(rockchip, status, PCIE_RC_CONFIG_LCS);
 
 	/* Enable Gen1 training */
···
 	regs = platform_get_resource_byname(pdev,
 					    IORESOURCE_MEM,
 					    "axi-base");
-	rockchip->reg_base = devm_ioremap_resource(dev, regs);
+	rockchip->reg_base = devm_pci_remap_cfg_resource(dev, regs);
 	if (IS_ERR(rockchip->reg_base))
 		return PTR_ERR(rockchip->reg_base);
 
···
 					 err, io);
 				continue;
 			}
+			rockchip->io = io;
 			break;
 		case IORESOURCE_MEM:
 			mem = win->res;
···
 		err = -ENOMEM;
 		goto err_free_res;
 	}
+	rockchip->root_bus = bus;
 
 	pci_bus_size_bridges(bus);
 	pci_bus_assign_resources(bus);
···
 		pcie_bus_configure_settings(child);
 
 	pci_bus_add_devices(bus);
-	return err;
+	return 0;
 
 err_free_res:
 	pci_free_resource_list(&res);
···
 	return err;
 }
 
+static int rockchip_pcie_remove(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct rockchip_pcie *rockchip = dev_get_drvdata(dev);
+
+	pci_stop_root_bus(rockchip->root_bus);
+	pci_remove_root_bus(rockchip->root_bus);
+	pci_unmap_iospace(rockchip->io);
+	irq_domain_remove(rockchip->irq_domain);
+
+	phy_power_off(rockchip->phy);
+	phy_exit(rockchip->phy);
+
+	clk_disable_unprepare(rockchip->clk_pcie_pm);
+	clk_disable_unprepare(rockchip->hclk_pcie);
+	clk_disable_unprepare(rockchip->aclk_perf_pcie);
+	clk_disable_unprepare(rockchip->aclk_pcie);
+
+	if (!IS_ERR(rockchip->vpcie3v3))
+		regulator_disable(rockchip->vpcie3v3);
+	if (!IS_ERR(rockchip->vpcie1v8))
+		regulator_disable(rockchip->vpcie1v8);
+	if (!IS_ERR(rockchip->vpcie0v9))
+		regulator_disable(rockchip->vpcie0v9);
+
+	return 0;
+}
+
 static const struct dev_pm_ops rockchip_pcie_pm_ops = {
 	SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(rockchip_pcie_suspend_noirq,
 				      rockchip_pcie_resume_noirq)
···
 	{ .compatible = "rockchip,rk3399-pcie", },
 	{}
 };
+MODULE_DEVICE_TABLE(of, rockchip_pcie_of_match);
 
 static struct platform_driver rockchip_pcie_driver = {
 	.driver = {
···
 		.pm = &rockchip_pcie_pm_ops,
 	},
 	.probe = rockchip_pcie_probe,
-
+	.remove = rockchip_pcie_remove,
 };
-builtin_platform_driver(rockchip_pcie_driver);
+module_platform_driver(rockchip_pcie_driver);
+
+MODULE_AUTHOR("Rockchip Inc");
+MODULE_DESCRIPTION("Rockchip AXI PCIe driver");
+MODULE_LICENSE("GPL v2");

drivers/pci/host/pcie-xilinx-nwl.c

···
 	pcie->phys_pcie_reg_base = res->start;
 
 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "cfg");
-	pcie->ecam_base = devm_ioremap_resource(dev, res);
+	pcie->ecam_base = devm_pci_remap_cfg_resource(dev, res);
 	if (IS_ERR(pcie->ecam_base))
 		return PTR_ERR(pcie->ecam_base);
 	pcie->phys_ecam_base = res->start;

drivers/pci/host/pcie-xilinx.c

···
 		return err;
 	}
 
-	port->reg_base = devm_ioremap_resource(dev, &regs);
+	port->reg_base = devm_pci_remap_cfg_resource(dev, &regs);
 	if (IS_ERR(port->reg_base))
 		return PTR_ERR(port->reg_base);
 

drivers/pci/hotplug/pciehp_pci.c

···
 				break;
 			}
 		}
+		if (!presence) {
+			pci_dev_set_disconnected(dev, NULL);
+			if (pci_has_subordinate(dev))
+				pci_walk_bus(dev->subordinate,
+					     pci_dev_set_disconnected, NULL);
+		}
 		pci_stop_and_remove_bus_device(dev);
 		/*
 		 * Ensure that no new Requests will be generated from

drivers/pci/iov.c

···
 	iov->total_VFs = total;
 	iov->pgsz = pgsz;
 	iov->self = dev;
+	iov->drivers_autoprobe = true;
 	pci_read_config_dword(dev, pos + PCI_SRIOV_CAP, &iov->cap);
 	pci_read_config_byte(dev, pos + PCI_SRIOV_FUNC_LINK, &iov->link);
 	if (pci_pcie_type(dev) == PCI_EXP_TYPE_RC_END)

drivers/pci/irq.c

···
 /*
- * PCI IRQ failure handing code
+ * PCI IRQ handling code
  *
  * Copyright (c) 2008 James Bottomley <[e-mail]>
+ * Copyright (C) 2017 Christoph Hellwig.
  */
 
 #include <linux/acpi.h>
···
 	return PCI_LOST_IRQ_NO_INFORMATION;
 }
 EXPORT_SYMBOL(pci_lost_interrupt);
+
+/**
+ * pci_request_irq - allocate an interrupt line for a PCI device
+ * @dev:	PCI device to operate on
+ * @nr:		device-relative interrupt vector index (0-based).
+ * @handler:	Function to be called when the IRQ occurs.
+ *		Primary handler for threaded interrupts.
+ *		If NULL and thread_fn != NULL the default primary handler is
+ *		installed.
+ * @thread_fn:	Function called from the IRQ handler thread
+ *		If NULL, no IRQ thread is created
+ * @dev_id:	Cookie passed back to the handler function
+ * @fmt:	Printf-like format string naming the handler
+ *
+ * This call allocates interrupt resources and enables the interrupt line and
+ * IRQ handling. From the point this call is made @handler and @thread_fn may
+ * be invoked.  All interrupts requested using this function might be shared.
+ *
+ * @dev_id must not be NULL and must be globally unique.
+ */
+int pci_request_irq(struct pci_dev *dev, unsigned int nr, irq_handler_t handler,
+		irq_handler_t thread_fn, void *dev_id, const char *fmt, ...)
+{
+	va_list ap;
+	int ret;
+	char *devname;
+
+	va_start(ap, fmt);
+	devname = kvasprintf(GFP_KERNEL, fmt, ap);
+	va_end(ap);
+
+	ret = request_threaded_irq(pci_irq_vector(dev, nr), handler, thread_fn,
+			IRQF_SHARED, devname, dev_id);
+	if (ret)
+		kfree(devname);
+	return ret;
+}
+EXPORT_SYMBOL(pci_request_irq);
+
+/**
+ * pci_free_irq - free an interrupt allocated with pci_request_irq
+ * @dev:	PCI device to operate on
+ * @nr:		device-relative interrupt vector index (0-based).
+ * @dev_id:	Device identity to free
+ *
+ * Remove an interrupt handler. The handler is removed and if the interrupt
+ * line is no longer in use by any driver it is disabled.  The caller must
+ * ensure the interrupt is disabled on the device before calling this function.
+ * The function does not return until any executing interrupts for this IRQ
+ * have completed.
+ *
+ * This function must not be called from interrupt context.
+ */
+void pci_free_irq(struct pci_dev *dev, unsigned int nr, void *dev_id)
+{
+	kfree(free_irq(pci_irq_vector(dev, nr), dev_id));
+}
+EXPORT_SYMBOL(pci_free_irq);

drivers/pci/mmap.c

···
+/*
+ * mmap.c — generic PCI resource mmap helper
+ *
+ * Copyright © 2017 Amazon.com, Inc. or its affiliates.
+ *
+ * Author: David Woodhouse <[e-mail]>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/pci.h>
+
+#ifdef ARCH_GENERIC_PCI_MMAP_RESOURCE
+
+/*
+ * Modern setup: generic pci_mmap_resource_range(), and implement the legacy
+ * pci_mmap_page_range() (if needed) as a wrapper round it.
+ */
+
+#ifdef HAVE_PCI_MMAP
+int pci_mmap_page_range(struct pci_dev *pdev, int bar,
+			struct vm_area_struct *vma,
+			enum pci_mmap_state mmap_state, int write_combine)
+{
+	resource_size_t start, end;
+
+	pci_resource_to_user(pdev, bar, &pdev->resource[bar], &start, &end);
+
+	/* Adjust vm_pgoff to be the offset within the resource */
+	vma->vm_pgoff -= start >> PAGE_SHIFT;
+	return pci_mmap_resource_range(pdev, bar, vma, mmap_state,
+				       write_combine);
+}
+#endif
+
+static const struct vm_operations_struct pci_phys_vm_ops = {
+#ifdef CONFIG_HAVE_IOREMAP_PROT
+	.access = generic_access_phys,
+#endif
+};
+
+int pci_mmap_resource_range(struct pci_dev *pdev, int bar,
+			    struct vm_area_struct *vma,
+			    enum pci_mmap_state mmap_state, int write_combine)
+{
+	unsigned long size;
+	int ret;
+
+	size = ((pci_resource_len(pdev, bar) - 1) >> PAGE_SHIFT) + 1;
+	if (vma->vm_pgoff + vma_pages(vma) > size)
+		return -EINVAL;
+
+	if (write_combine)
+		vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot);
+	else
+		vma->vm_page_prot = pgprot_device(vma->vm_page_prot);
+
+	if (mmap_state == pci_mmap_io) {
+		ret = pci_iobar_pfn(pdev, bar, vma);
+		if (ret)
+			return ret;
+	} else
+		vma->vm_pgoff += (pci_resource_start(pdev, bar) >> PAGE_SHIFT);
+
+	vma->vm_ops = &pci_phys_vm_ops;
+
+	return io_remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff,
+				  vma->vm_end - vma->vm_start,
+				  vma->vm_page_prot);
+}
+
+#elif defined(HAVE_PCI_MMAP) /* && !ARCH_GENERIC_PCI_MMAP_RESOURCE */
+
+/*
+ * Legacy setup: Impement pci_mmap_resource_range() as a wrapper around
+ * the architecture's pci_mmap_page_range(), converting to "user visible"
+ * addresses as necessary.
+ */
+
+int pci_mmap_resource_range(struct pci_dev *pdev, int bar,
+			    struct vm_area_struct *vma,
+			    enum pci_mmap_state mmap_state, int write_combine)
+{
+	resource_size_t start, end;
+
+	/*
+	 * pci_mmap_page_range() expects the same kind of entry as coming
+	 * from /proc/bus/pci/ which is a "user visible" value. If this is
+	 * different from the resource itself, arch will do necessary fixup.
+	 */
+	pci_resource_to_user(pdev, bar, &pdev->resource[bar], &start, &end);
+	vma->vm_pgoff += start >> PAGE_SHIFT;
+	return pci_mmap_page_range(pdev, bar, vma, mmap_state, write_combine);
+}
+#endif

drivers/pci/msi.c

···
 {
 	struct pci_dev *dev = msi_desc_to_pci_dev(entry);
 
-	if (dev->current_state != PCI_D0) {
+	if (dev->current_state != PCI_D0 || pci_dev_is_disconnected(dev)) {
 		/* Don't touch the hardware now */
 	} else if (entry->msi_attrib.is_msix) {
 		void __iomem *base = pci_msix_desc_addr(entry);
···
 	if (affd) {
 		masks = irq_create_affinity_masks(nvec, affd);
 		if (!masks)
-			pr_err("Unable to allocate affinity masks, ignoring\n");
+			dev_err(&dev->dev, "can't allocate MSI affinity masks for %d vectors\n",
+				nvec);
 	}
 
 	/* MSI Entry Initialization */
···
 	if (affd) {
 		masks = irq_create_affinity_masks(nvec, affd);
 		if (!masks)
-			pr_err("Unable to allocate affinity masks, ignoring\n");
+			dev_err(&dev->dev, "can't allocate MSI-X affinity masks for %d vectors\n",
+				nvec);
 	}
 
 	for (i = 0, curmsk = masks; i < nvec; i++) {
···
 }
 EXPORT_SYMBOL(pci_msi_vec_count);
 
-void pci_msi_shutdown(struct pci_dev *dev)
+static void pci_msi_shutdown(struct pci_dev *dev)
 {
 	struct msi_desc *desc;
 	u32 mask;
···
 	return msix_capability_init(dev, entries, nvec, affd);
 }
 
-void pci_msix_shutdown(struct pci_dev *dev)
+static void pci_msix_shutdown(struct pci_dev *dev)
 {
 	struct msi_desc *entry;
 
 	if (!pci_msi_enable || !dev || !dev->msix_enabled)
 		return;
+
+	if (pci_dev_is_disconnected(dev)) {
+		dev->msix_enabled = 0;
+		return;
+	}
 
 	/* Return the device with MSI-X masked as initial states */
 	for_each_pci_msi_entry(entry, dev) {

drivers/pci/pci-driver.c

···
 {
 }
 
+#ifdef CONFIG_PCI_IOV
+static inline bool pci_device_can_probe(struct pci_dev *pdev)
+{
+	return (!pdev->is_virtfn || pdev->physfn->sriov->drivers_autoprobe);
+}
+#else
+static inline bool pci_device_can_probe(struct pci_dev *pdev)
+{
+	return true;
+}
+#endif
+
 static int pci_device_probe(struct device *dev)
 {
 	int error;
···
 		return error;
 
 	pci_dev_get(pci_dev);
-	error = __pci_device_probe(drv, pci_dev);
-	if (error) {
-		pcibios_free_irq(pci_dev);
-		pci_dev_put(pci_dev);
+	if (pci_device_can_probe(pci_dev)) {
+		error = __pci_device_probe(drv, pci_dev);
+		if (error) {
+			pcibios_free_irq(pci_dev);
+			pci_dev_put(pci_dev);
+		}
 	}
 
 	return error;
···
 
 	if (drv && drv->shutdown)
 		drv->shutdown(pci_dev);
-	pci_msi_shutdown(pci_dev);
-	pci_msix_shutdown(pci_dev);
 
 	/*
 	 * If this is a kexec reboot, turn off Bus Master bit on the

drivers/pci/pci-sysfs.c

···
 	return count;
 }
 
+static ssize_t sriov_drivers_autoprobe_show(struct device *dev,
+					    struct device_attribute *attr,
+					    char *buf)
+{
+	struct pci_dev *pdev = to_pci_dev(dev);
+
+	return sprintf(buf, "%u\n", pdev->sriov->drivers_autoprobe);
+}
+
+static ssize_t sriov_drivers_autoprobe_store(struct device *dev,
+					     struct device_attribute *attr,
+					     const char *buf, size_t count)
+{
+	struct pci_dev *pdev = to_pci_dev(dev);
+	bool drivers_autoprobe;
+
+	if (kstrtobool(buf, &drivers_autoprobe) < 0)
+		return -EINVAL;
+
+	pdev->sriov->drivers_autoprobe = drivers_autoprobe;
+
+	return count;
+}
+
 static struct device_attribute sriov_totalvfs_attr = __ATTR_RO(sriov_totalvfs);
 static struct device_attribute sriov_numvfs_attr =
 		__ATTR(sriov_numvfs, (S_IRUGO|S_IWUSR|S_IWGRP),
 		       sriov_numvfs_show, sriov_numvfs_store);
+static struct device_attribute sriov_drivers_autoprobe_attr =
+		__ATTR(sriov_drivers_autoprobe, (S_IRUGO|S_IWUSR|S_IWGRP),
+		       sriov_drivers_autoprobe_show, sriov_drivers_autoprobe_store);
 #endif /* CONFIG_PCI_IOV */
 
 static ssize_t driver_override_store(struct device *dev,
···
 }
 #endif /* HAVE_PCI_LEGACY */
 
-#ifdef HAVE_PCI_MMAP
+#if defined(HAVE_PCI_MMAP) || defined(ARCH_GENERIC_PCI_MMAP_RESOURCE)
 
 int pci_mmap_fits(struct pci_dev *pdev, int resno, struct vm_area_struct *vma,
 		  enum pci_mmap_api mmap_api)
 {
-	unsigned long nr, start, size, pci_start;
+	unsigned long nr, start, size;
+	resource_size_t pci_start = 0, pci_end;
 
 	if (pci_resource_len(pdev, resno) == 0)
 		return 0;
 	nr = vma_pages(vma);
 	start = vma->vm_pgoff;
 	size = ((pci_resource_len(pdev, resno) - 1) >> PAGE_SHIFT) + 1;
-	pci_start = (mmap_api == PCI_MMAP_PROCFS) ?
-			pci_resource_start(pdev, resno) >> PAGE_SHIFT : 0;
+	if (mmap_api == PCI_MMAP_PROCFS) {
+		pci_resource_to_user(pdev, resno, &pdev->resource[resno],
+				     &pci_start, &pci_end);
+		pci_start >>= PAGE_SHIFT;
+	}
 	if (start >= pci_start && start < pci_start + size &&
 			start + nr <= pci_start + size)
 		return 1;
···
 			     struct vm_area_struct *vma, int write_combine)
 {
 	struct pci_dev *pdev = to_pci_dev(kobj_to_dev(kobj));
-	struct resource *res = attr->private;
+	int bar = (unsigned long)attr->private;
 	enum pci_mmap_state mmap_type;
-	resource_size_t start, end;
-	int i;
-
-	for (i = 0; i < PCI_ROM_RESOURCE; i++)
-		if (res == &pdev->resource[i])
-			break;
-	if (i >= PCI_ROM_RESOURCE)
-		return -ENODEV;
+	struct resource *res = &pdev->resource[bar];
 
 	if (res->flags & IORESOURCE_MEM && iomem_is_exclusive(res->start))
 		return -EINVAL;
 
-	if (!pci_mmap_fits(pdev, i, vma, PCI_MMAP_SYSFS)) {
+	if (!pci_mmap_fits(pdev, bar, vma, PCI_MMAP_SYSFS)) {
 		WARN(1, "process \"%s\" tried to map 0x%08lx bytes at page 0x%08lx on %s BAR %d (start 0x%16Lx, size 0x%16Lx)\n",
 			current->comm, vma->vm_end-vma->vm_start, vma->vm_pgoff,
-			pci_name(pdev), i,
-			(u64)pci_resource_start(pdev, i),
-			(u64)pci_resource_len(pdev, i));
+			pci_name(pdev), bar,
+			(u64)pci_resource_start(pdev, bar),
+			(u64)pci_resource_len(pdev, bar));
 		return -EINVAL;
 	}
-
-	/* pci_mmap_page_range() expects the same kind of entry as coming
-	 * from /proc/bus/pci/ which is a "user visible" value. If this is
-	 * different from the resource itself, arch will do necessary fixup.
-	 */
-	pci_resource_to_user(pdev, i, res, &start, &end);
-	vma->vm_pgoff += start >> PAGE_SHIFT;
 	mmap_type = res->flags & IORESOURCE_MEM ? pci_mmap_mem : pci_mmap_io;
-	return pci_mmap_page_range(pdev, vma, mmap_type, write_combine);
+
+	return pci_mmap_resource_range(pdev, bar, vma, mmap_type, write_combine);
 }
 
 static int pci_mmap_resource_uc(struct file *filp, struct kobject *kobj,
···
 			       loff_t off, size_t count, bool write)
 {
 	struct pci_dev *pdev = to_pci_dev(kobj_to_dev(kobj));
-	struct resource *res = attr->private;
+	int bar = (unsigned long)attr->private;
+	struct resource *res;
 	unsigned long port = off;
-	int i;
 
-	for (i = 0; i < PCI_ROM_RESOURCE; i++)
-		if (res == &pdev->resource[i])
-			break;
-	if (i >= PCI_ROM_RESOURCE)
-		return -ENODEV;
+	res = &pdev->resource[bar];
 
-	port += pci_resource_start(pdev, i);
+	port += pci_resource_start(pdev, bar);
 
-	if (port > pci_resource_end(pdev, i))
+	if (port > pci_resource_end(pdev, bar))
 		return 0;
 
-	if (port + count - 1 > pci_resource_end(pdev, i))
+	if (port + count - 1 > pci_resource_end(pdev, bar))
 		return -EINVAL;
 
 	switch (count) {
···
 	} else {
 		pdev->res_attr[num] = res_attr;
 		sprintf(res_attr_name, "resource%d", num);
-		res_attr->mmap = pci_mmap_resource_uc;
-	}
-	if (pci_resource_flags(pdev, num) & IORESOURCE_IO) {
-		res_attr->read = pci_read_resource_io;
-		res_attr->write = pci_write_resource_io;
+		if (pci_resource_flags(pdev, num) & IORESOURCE_IO) {
+			res_attr->read = pci_read_resource_io;
+			res_attr->write = pci_write_resource_io;
+			if (arch_can_pci_mmap_io())
+				res_attr->mmap = pci_mmap_resource_uc;
+		} else {
+			res_attr->mmap = pci_mmap_resource_uc;
+		}
 	}
 	res_attr->attr.name = res_attr_name;
 	res_attr->attr.mode = S_IRUSR | S_IWUSR;
 	res_attr->size = pci_resource_len(pdev, num);
-	res_attr->private = &pdev->resource[num];
+	res_attr->private = (void *)(unsigned long)num;
 	retval = sysfs_create_bin_file(&pdev->dev.kobj, res_attr);
 	if (retval)
 		kfree(res_attr);
···
 
 		retval = pci_create_attr(pdev, i, 0);
 		/* for prefetchable resources, create a WC mappable file */
-		if (!retval && pdev->resource[i].flags & IORESOURCE_PREFETCH)
+		if (!retval && arch_can_pci_mmap_wc() &&
+		    pdev->resource[i].flags & IORESOURCE_PREFETCH)
 			retval = pci_create_attr(pdev, i, 1);
-
 		if (retval) {
 			pci_remove_resource_files(pdev);
 			return retval;
···
 static struct attribute *sriov_dev_attrs[] = {
 	&sriov_totalvfs_attr.attr,
 	&sriov_numvfs_attr.attr,
+	&sriov_drivers_autoprobe_attr.attr,
 	NULL,
 };
 

drivers/pci/pci.c

···
 	if (delay < pci_pm_d3_delay)
 		delay = pci_pm_d3_delay;
 
-	msleep(delay);
+	if (delay)
+		msleep(delay);
 }
 
 #ifdef CONFIG_PCI_DOMAINS
···
 		 * because have already delayed for the bridge.
 		 */
 		if (dev->runtime_d3cold) {
-			msleep(dev->d3cold_delay);
+			if (dev->d3cold_delay)
+				msleep(dev->d3cold_delay);
 			/*
 			 * When powering on a bridge from D3cold, the
 			 * whole hierarchy may be powered on into
···
 		}
 	}
 	if (!list_empty(&pci_pme_list))
-		schedule_delayed_work(&pci_pme_work,
-				      msecs_to_jiffies(PME_TIMEOUT));
+		queue_delayed_work(system_freezable_wq, &pci_pme_work,
+				   msecs_to_jiffies(PME_TIMEOUT));
 	mutex_unlock(&pci_pme_list_mutex);
 }
 
···
 			mutex_lock(&pci_pme_list_mutex);
 			list_add(&pme_dev->list, &pci_pme_list);
 			if (list_is_singular(&pci_pme_list))
-				schedule_delayed_work(&pci_pme_work,
-						      msecs_to_jiffies(PME_TIMEOUT));
+				queue_delayed_work(system_freezable_wq,
+						   &pci_pme_work,
+						   msecs_to_jiffies(PME_TIMEOUT));
 			mutex_unlock(&pci_pme_list_mutex);
 		} else {
 			mutex_lock(&pci_pme_list_mutex);
···
  *	Only architectures that have memory mapped IO functions defined
  *	(and the PCI_IOBASE value defined) should call this function.
  */
-int __weak pci_remap_iospace(const struct resource *res, phys_addr_t phys_addr)
+int pci_remap_iospace(const struct resource *res, phys_addr_t phys_addr)
 {
 #if defined(PCI_IOBASE) && defined(CONFIG_MMU)
 	unsigned long vaddr = (unsigned long)PCI_IOBASE + res->start;
···
 	return -ENODEV;
 #endif
 }
+EXPORT_SYMBOL(pci_remap_iospace);
 
 /**
  *	pci_unmap_iospace - Unmap the memory mapped I/O space
···
 	unmap_kernel_range(vaddr, resource_size(res));
 #endif
 }
+EXPORT_SYMBOL(pci_unmap_iospace);
+
+/**
+ * devm_pci_remap_cfgspace - Managed pci_remap_cfgspace()
+ * @dev: Generic device to remap IO address for
+ * @offset: Resource address to map
+ * @size: Size of map
+ *
+ * Managed pci_remap_cfgspace().  Map is automatically unmapped on driver
+ * detach.
+ */
+void __iomem *devm_pci_remap_cfgspace(struct device *dev,
+				      resource_size_t offset,
+				      resource_size_t size)
+{
+	void __iomem **ptr, *addr;
+
+	ptr = devres_alloc(devm_ioremap_release, sizeof(*ptr), GFP_KERNEL);
+	if (!ptr)
+		return NULL;
+
+	addr = pci_remap_cfgspace(offset, size);
+	if (addr) {
+		*ptr = addr;
+		devres_add(dev, ptr);
+	} else
+		devres_free(ptr);
+
+	return addr;
+}
+EXPORT_SYMBOL(devm_pci_remap_cfgspace);
+
+/**
+ * devm_pci_remap_cfg_resource - check, request region and ioremap cfg resource
+ * @dev: generic device to handle the resource for
+ * @res: configuration space resource to be handled
+ *
+ * Checks that a resource is a valid memory region, requests the memory
+ * region and ioremaps with pci_remap_cfgspace() API that ensures the
+ * proper PCI configuration space memory attributes are guaranteed.
+ *
+ * All operations are managed and will be undone on driver detach.
+ *
+ * Returns a pointer to the remapped memory or an ERR_PTR() encoded error code
+ * on failure. Usage example:
+ *
+ *	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ *	base = devm_pci_remap_cfg_resource(&pdev->dev, res);
+ *	if (IS_ERR(base))
+ *		return PTR_ERR(base);
+ */
+void __iomem *devm_pci_remap_cfg_resource(struct device *dev,
+					  struct resource *res)
+{
+	resource_size_t size;
+	const char *name;
+	void __iomem *dest_ptr;
+
+	BUG_ON(!dev);
+
+	if (!res || resource_type(res) != IORESOURCE_MEM) {
+		dev_err(dev, "invalid resource\n");
+		return IOMEM_ERR_PTR(-EINVAL);
+	}
+
+	size = resource_size(res);
+	name = res->name ?: dev_name(dev);
+
+	if (!devm_request_mem_region(dev, res->start, size, name)) {
+		dev_err(dev, "can't request region for resource %pR\n", res);
+		return IOMEM_ERR_PTR(-EBUSY);
+	}
+
+	dest_ptr = devm_pci_remap_cfgspace(dev, res->start, size);
+	if (!dest_ptr) {
+		dev_err(dev, "ioremap failed for resource %pR\n", res);
+		devm_release_mem_region(dev, res->start, size);
+		dest_ptr = IOMEM_ERR_PTR(-ENOMEM);
+	}
+
+	return dest_ptr;
+}
+EXPORT_SYMBOL(devm_pci_remap_cfg_resource);
 
 static void __pci_set_master(struct pci_dev *dev, bool enable)
 {
···
 			 (i - 1) * 100);
 }
 
-static int pcie_flr(struct pci_dev *dev, int probe)
+/**
+ * pcie_has_flr - check if a device supports function level resets
+ * @dev:	device to check
+ *
+ * Returns true if the device advertises support for PCIe function level
+ * resets.
+ */
+static bool pcie_has_flr(struct pci_dev *dev)
 {
 	u32 cap;
 
+	if (dev->dev_flags & PCI_DEV_FLAGS_NO_FLR_RESET)
+		return false;
+
 	pcie_capability_read_dword(dev, PCI_EXP_DEVCAP, &cap);
-	if (!(cap & PCI_EXP_DEVCAP_FLR))
-		return -ENOTTY;
+	return cap & PCI_EXP_DEVCAP_FLR;
+}
 
-	if (probe)
-		return 0;
-
+/**
+ * pcie_flr - initiate a PCIe function level reset
+ * @dev:	device to reset
+ *
+ * Initiate a function level reset on @dev.  The caller should ensure the
+ * device supports FLR before calling this function, e.g. by using the
+ * pcie_has_flr() helper.
+ */
+void pcie_flr(struct pci_dev *dev)
+{
 	if (!pci_wait_for_pending_transaction(dev))
 		dev_err(&dev->dev, "timed out waiting for pending transaction; performing function level reset anyway\n");
 
 	pcie_capability_set_word(dev, PCI_EXP_DEVCTL, PCI_EXP_DEVCTL_BCR_FLR);
 	pci_flr_wait(dev);
-	return 0;
 }
+EXPORT_SYMBOL_GPL(pcie_flr);
 
 static int pci_af_flr(struct pci_dev *dev, int probe)
 {
···
 
 	pos = pci_find_capability(dev, PCI_CAP_ID_AF);
 	if (!pos)
+		return -ENOTTY;
+
+	if (dev->dev_flags & PCI_DEV_FLAGS_NO_FLR_RESET)
 		return -ENOTTY;
 
 	pci_read_config_byte(dev, pos + PCI_AF_CAP, &cap);
···
 	if (rc != -ENOTTY)
 		goto done;
 
-	rc = pcie_flr(dev, probe);
-	if (rc != -ENOTTY)
+	if (pcie_has_flr(dev)) {
+		if (!probe)
+			pcie_flr(dev);
+		rc = 0;
 		goto done;
+	}
 
 	rc = pci_af_flr(dev, probe);
 	if (rc != -ENOTTY)
···
 {
 	u32 v;
 
+	if (pci_dev_is_disconnected(pdev))
+		return false;
 	return pci_bus_read_dev_vendor_id(pdev->bus, pdev->devfn, &v, 0);
 }
 EXPORT_SYMBOL_GPL(pci_device_is_present);
···
 }
 EXPORT_SYMBOL_GPL(pci_ignore_hotplug);
 
+resource_size_t __weak pcibios_default_alignment(void)
+{
+	return 0;
+}
+
 #define RESOURCE_ALIGNMENT_PARAM_SIZE COMMAND_LINE_SIZE
 static char resource_alignment_param[RESOURCE_ALIGNMENT_PARAM_SIZE] = {0};
 static DEFINE_SPINLOCK(resource_alignment_lock);
···
 /**
  * pci_specified_resource_alignment - get resource alignment specified by user.
  * @dev: the PCI device to get
+ * @resize: whether or not to change resources' size when reassigning alignment
  *
  * RETURNS: Resource alignment if it is specified.
  *          Zero if it is not specified.
  */
-static resource_size_t pci_specified_resource_alignment(struct pci_dev *dev)
+static resource_size_t pci_specified_resource_alignment(struct pci_dev *dev,
+							bool *resize)
 {
 	int seg, bus, slot, func, align_order, count;
 	unsigned short vendor, device, subsystem_vendor, subsystem_device;
-	resource_size_t align = 0;
+	resource_size_t align = pcibios_default_alignment();
 	char *p;
 
 	spin_lock(&resource_alignment_lock);
 	p = resource_alignment_param;
-	if (!*p)
+	if (!*p && !align)
 		goto out;
 	if (pci_has_flag(PCI_PROBE_ONLY)) {
+		align = 0;
 		pr_info_once("PCI: Ignoring requested alignments (PCI_PROBE_ONLY)\n");
 		goto out;
 	}
···
 				(!device || (device == dev->device)) &&
 				(!subsystem_vendor || (subsystem_vendor == dev->subsystem_vendor)) &&
 				(!subsystem_device || (subsystem_device == dev->subsystem_device))) {
+				*resize = true;
 				if (align_order == -1)
 					align = PAGE_SIZE;
 				else
···
 				bus == dev->bus->number &&
 				slot == PCI_SLOT(dev->devfn) &&
 				func == PCI_FUNC(dev->devfn)) {
+				*resize = true;
 				if (align_order == -1)
 					align = PAGE_SIZE;
 				else
···
 	return align;
 }
 
+static void pci_request_resource_alignment(struct pci_dev *dev, int bar,
+					   resource_size_t align, bool resize)
+{
+	struct resource *r = &dev->resource[bar];
+	resource_size_t size;
+
+	if (!(r->flags & IORESOURCE_MEM))
+		return;
+
+	if (r->flags & IORESOURCE_PCI_FIXED) {
+		dev_info(&dev->dev, "BAR%d %pR: ignoring requested alignment %#llx\n",
+			 bar, r, (unsigned long long)align);
+		return;
+	}
+
+	size = resource_size(r);
+	if (size >= align)
+		return;
+
+	/*
+	 * Increase the alignment of the resource.  There are two ways we
+	 * can do this:
+	 *
+	 * 1) Increase the size of the resource.  BARs are aligned on their
+	 *    size, so when we reallocate space for this resource, we'll
+	 *    allocate it with the larger alignment.  This also prevents
+	 *    assignment of any other BARs inside the alignment region, so
+	 *    if we're requesting page alignment, this means no other BARs
+	 *    will share the page.
+	 *
+	 *    The disadvantage is that this makes the resource larger than
+	 *    the hardware BAR, which may break drivers that compute things
+	 *    based on the resource size, e.g., to find registers at a
+	 *    fixed offset before the end of the BAR.
+	 *
+	 * 2) Retain the resource size, but use IORESOURCE_STARTALIGN and
+	 *    set r->start to the desired alignment.  By itself this
+	 *    doesn't prevent other BARs being put inside the alignment
+	 *    region, but if we realign *every* resource of every device in
+	 *    the system, none of them will share an alignment region.
+	 *
+	 * When the user has requested alignment for only some devices via
+	 * the "pci=resource_alignment" argument, "resize" is true and we
+	 * use the first method.  Otherwise we assume we're aligning all
+	 * devices and we use the second.
+	 */
+
+	dev_info(&dev->dev, "BAR%d %pR: requesting alignment to %#llx\n",
+		 bar, r, (unsigned long long)align);
+
+	if (resize) {
+		r->start = 0;
+		r->end = align - 1;
+	} else {
+		r->flags &= ~IORESOURCE_SIZEALIGN;
+		r->flags |= IORESOURCE_STARTALIGN;
+		r->start = align;
+		r->end = r->start + size - 1;
+	}
+	r->flags |= IORESOURCE_UNSET;
+}
+
 /*
  * This function disables memory decoding and releases memory resources
  * of the device specified by kernel's boot parameter 'pci=resource_alignment='.
···
 {
 	int i;
 	struct resource *r;
-	resource_size_t align, size;
+	resource_size_t align;
 	u16 command;
+	bool resize = false;
 
 	/*
 	 * VF BARs are read-only zero according to SR-IOV spec r1.1, sec
···
 		return;
 
 	/* check if specified PCI is target device to reassign */
-	align = pci_specified_resource_alignment(dev);
+	align = pci_specified_resource_alignment(dev, &resize);
 	if (!align)
 		return;
 
···
 	command &= ~PCI_COMMAND_MEMORY;
 	pci_write_config_word(dev, PCI_COMMAND, command);
 
-	for (i = 0; i < PCI_BRIDGE_RESOURCES; i++) {
-		r = &dev->resource[i];
-		if (!(r->flags & IORESOURCE_MEM))
-			continue;
-		if (r->flags & IORESOURCE_PCI_FIXED) {
-			dev_info(&dev->dev, "Ignoring requested alignment for BAR%d: %pR\n",
-				i, r);
-			continue;
-		}
+	for (i = 0; i <= PCI_ROM_RESOURCE; i++)
+		pci_request_resource_alignment(dev, i, align, resize);
 
-		size = resource_size(r);
-		if (size < align) {
-			size = align;
-			dev_info(&dev->dev,
-				"Rounding up size of resource #%d to %#llx.\n",
-				i, (unsigned long long)size);
-		}
-		r->flags |= IORESOURCE_UNSET;
-		r->end = size - 1;
-		r->start = 0;
-	}
-	/* Need to disable bridge's resource window,
+	/*
+	 * Need to disable bridge's resource window,
 	 * to enable the kernel to reassign new resource
 	 * window later on.
 	 */

drivers/pci/pci.h

···
 void pci_remove_firmware_label_files(struct pci_dev *pdev);
 #endif
 void pci_cleanup_rom(struct pci_dev *dev);
-#ifdef HAVE_PCI_MMAP
+
 enum pci_mmap_api {
 	PCI_MMAP_SYSFS,	/* mmap on /sys/bus/pci/devices/<BDF>/resource<N> */
 	PCI_MMAP_PROCFS	/* mmap on /proc/bus/pci/<BDF> */
 };
 int pci_mmap_fits(struct pci_dev *pdev, int resno, struct vm_area_struct *vmai,
 		  enum pci_mmap_api mmap_api);
-#endif
+
 int pci_probe_reset_function(struct pci_dev *dev);
 
 /**
···
 	struct pci_dev *self;	/* this PF */
 	struct mutex lock;	/* lock for setting sriov_numvfs in sysfs */
 	resource_size_t barsz[PCI_SRIOV_NUM_BARS];	/* VF BAR size */
+	bool drivers_autoprobe;	/* auto probing of VFs by driver */
 };
+
+/* pci_dev priv_flags */
+#define PCI_DEV_DISCONNECTED 0
+
+static inline int pci_dev_set_disconnected(struct pci_dev *dev, void *unused)
+{
+	set_bit(PCI_DEV_DISCONNECTED, &dev->priv_flags);
+	return 0;
+}
+
+static inline bool pci_dev_is_disconnected(const struct pci_dev *dev)
+{
+	return test_bit(PCI_DEV_DISCONNECTED, &dev->priv_flags);
+}
 
 #ifdef CONFIG_PCI_ATS
 void pci_restore_ats_state(struct pci_dev *dev);

drivers/pci/pcie/pcie-dpc.c

···
 #include <linux/init.h>
 #include <linux/pci.h>
 #include <linux/pcieport_if.h>
+#include "../pci.h"
 
 struct dpc_dev {
 	struct pcie_device	*dev;
···
 	list_for_each_entry_safe_reverse(dev, temp, &parent->devices,
 					 bus_list) {
 		pci_dev_get(dev);
+		pci_dev_set_disconnected(dev, NULL);
+		if (pci_has_subordinate(dev))
+			pci_walk_bus(dev->subordinate,
+				     pci_dev_set_disconnected, NULL);
 		pci_stop_and_remove_bus_device(dev);
 		pci_dev_put(dev);
 	}

drivers/pci/probe.c

···
 int __pci_read_base(struct pci_dev *dev, enum pci_bar_type type,
 		    struct resource *res, unsigned int pos)
 {
-	u32 l, sz, mask;
+	u32 l = 0, sz = 0, mask;
 	u64 l64, sz64, mask64;
 	u16 orig_cmd;
 	struct pci_bus_region region, inverted_region;
···
 			res->flags |= IORESOURCE_ROM_ENABLE;
 		l64 = l & PCI_ROM_ADDRESS_MASK;
 		sz64 = sz & PCI_ROM_ADDRESS_MASK;
-		mask64 = (u32)PCI_ROM_ADDRESS_MASK;
+		mask64 = PCI_ROM_ADDRESS_MASK;
 	}
 
 	if (res->flags & IORESOURCE_MEM_64) {

drivers/pci/proc.c

···
 
 #ifdef HAVE_PCI_MMAP
 	case PCIIOC_MMAP_IS_IO:
+		if (!arch_can_pci_mmap_io())
+			return -EINVAL;
 		fpriv->mmap_state = pci_mmap_io;
 		break;
 
···
 		break;
 
 	case PCIIOC_WRITE_COMBINE:
-		if (arg)
-			fpriv->write_combine = 1;
-		else
-			fpriv->write_combine = 0;
-		break;
-
+		if (arch_can_pci_mmap_wc()) {
+			if (arg)
+				fpriv->write_combine = 1;
+			else
+				fpriv->write_combine = 0;
+			break;
+		}
+		/* If arch decided it can't, fall through... */
 #endif /* HAVE_PCI_MMAP */
-
 	default:
 		ret = -EINVAL;
 		break;
···
 {
 	struct pci_dev *dev = PDE_DATA(file_inode(file));
 	struct pci_filp_private *fpriv = file->private_data;
-	int i, ret, write_combine;
+	int i, ret, write_combine = 0, res_bit = IORESOURCE_MEM;
 
 	if (!capable(CAP_SYS_RAWIO))
 		return -EPERM;
 
+	if (fpriv->mmap_state == pci_mmap_io) {
+		if (!arch_can_pci_mmap_io())
+			return -EINVAL;
+		res_bit = IORESOURCE_IO;
+	}
+
 	/* Make sure the caller is mapping a real resource for this device */
 	for (i = 0; i < PCI_ROM_RESOURCE; i++) {
-		if (pci_mmap_fits(dev, i, vma,  PCI_MMAP_PROCFS))
+		if (dev->resource[i].flags & res_bit &&
+		    pci_mmap_fits(dev, i, vma,  PCI_MMAP_PROCFS))
 			break;
 	}
 
 	if (i >= PCI_ROM_RESOURCE)
 		return -ENODEV;
 
-	if (fpriv->mmap_state == pci_mmap_mem)
-		write_combine = fpriv->write_combine;
-	else
-		write_combine = 0;
-	ret = pci_mmap_page_range(dev, vma,
+	if (fpriv->mmap_state == pci_mmap_mem &&
+	    fpriv->write_combine) {
+		if (dev->resource[i].flags & IORESOURCE_PREFETCH)
+			write_combine = 1;
+		else
+			return -EINVAL;
+	}
+	ret = pci_mmap_page_range(dev, i, vma,
 				  fpriv->mmap_state, write_combine);
 	if (ret < 0)
 		return ret;

drivers/pci/quirks.c

···
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,	0x260b, quirk_intel_pcie_pm);
 
 #ifdef CONFIG_X86_IO_APIC
+static int dmi_disable_ioapicreroute(const struct dmi_system_id *d)
+{
+	noioapicreroute = 1;
+	pr_info("%s detected: disable boot interrupt reroute\n", d->ident);
+
+	return 0;
+}
+
+static struct dmi_system_id boot_interrupt_dmi_table[] = {
+	/*
+	 * Systems to exclude from boot interrupt reroute quirks
+	 */
+	{
+		.callback = dmi_disable_ioapicreroute,
+		.ident = "ASUSTek Computer INC. M2N-LR",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTek Computer INC."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "M2N-LR"),
+		},
+	},
+	{}
+};
+
 /*
  * Boot interrupts on some chipsets cannot be turned off. For these chipsets,
  * remap the original interrupt in the linux kernel to the boot interrupt, so
···
  */
 static void quirk_reroute_to_boot_interrupts_intel(struct pci_dev *dev)
 {
+	dmi_check_system(boot_interrupt_dmi_table);
 	if (noioapicquirk || noioapicreroute)
 		return;
 
···
 	 *
 	 * The 82599 supports FLR on VFs, but FLR support is reported only
 	 * in the PF DEVCAP (sec 9.3.10.4), not in the VF DEVCAP (sec 9.5).
-	 * Therefore, we can't use pcie_flr(), which checks the VF DEVCAP.
+	 * Thus we must call pcie_flr() directly without first checking if it is
+	 * supported.
 	 */
-
-	if (probe)
-		return 0;
-
-	if (!pci_wait_for_pending_transaction(dev))
-		dev_err(&dev->dev, "transaction is not cleared; proceeding with reset anyway\n");
-
-	pcie_capability_set_word(dev, PCI_EXP_DEVCTL, PCI_EXP_DEVCTL_BCR_FLR);
-
-	msleep(100);
-
+	if (!probe)
+		pcie_flr(dev);
 	return 0;
 }
 
···
 				      PCI_MSIX_FLAGS_ENABLE |
 				      PCI_MSIX_FLAGS_MASKALL);
 
-	/*
-	 * Start of pcie_flr() code sequence.  This reset code is a copy of
-	 * the guts of pcie_flr() because that's not an exported function.
-	 */
-
-	if (!pci_wait_for_pending_transaction(dev))
-		dev_err(&dev->dev, "transaction is not cleared; proceeding with reset anyway\n");
-
-	pcie_capability_set_word(dev, PCI_EXP_DEVCTL, PCI_EXP_DEVCTL_BCR_FLR);
-	msleep(100);
-
-	/*
-	 * End of pcie_flr() code sequence.
-	 */
+	pcie_flr(dev);
 
 	/*
 	 * Restore the configuration information (BAR values, etc.) including
···
 DECLARE_PCI_FIXUP_HEADER(0x10e3, 0x8113, quirk_use_pcie_bridge_dma_alias);
 /* ITE 8892, https://bugzilla.kernel.org/show_bug.cgi?id=73551 */
 DECLARE_PCI_FIXUP_HEADER(0x1283, 0x8892, quirk_use_pcie_bridge_dma_alias);
+/* ITE 8893 has the same problem as the 8892 */
+DECLARE_PCI_FIXUP_HEADER(0x1283, 0x8893, quirk_use_pcie_bridge_dma_alias);
 /* Intel 82801, https://bugzilla.kernel.org/show_bug.cgi?id=44881#c49 */
 DECLARE_PCI_FIXUP_HEADER(0x8086, 0x244e, quirk_use_pcie_bridge_dma_alias);
 
···
 }
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2260, quirk_mic_x200_dma_alias);
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2264, quirk_mic_x200_dma_alias);
+
+/*
+ * The IOMMU and interrupt controller on Broadcom Vulcan/Cavium ThunderX2 are
+ * associated not at the root bus, but at a bridge below. This quirk avoids
+ * generating invalid DMA aliases.
+ */
+static void quirk_bridge_cavm_thrx2_pcie_root(struct pci_dev *pdev)
+{
+	pdev->dev_flags |= PCI_DEV_FLAGS_BRIDGE_XLATE_ROOT;
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_BROADCOM, 0x9000,
+				quirk_bridge_cavm_thrx2_pcie_root);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_BROADCOM, 0x9084,
+				quirk_bridge_cavm_thrx2_pcie_root);
 
 /*
  * Intersil/Techwell TW686[4589]-based video capture cards have an empty (zero)
···
 	 */
 	acs_flags &= ~(PCI_ACS_SV | PCI_ACS_TB | PCI_ACS_RR |
 		       PCI_ACS_CR | PCI_ACS_UF | PCI_ACS_DT);
+
+	if (!((dev->device >= 0xa000) && (dev->device <= 0xa0ff)))
+		return -ENOTTY;
 
 	return acs_flags ? 0 : 1;
 }
···
 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x2031, quirk_no_aersid);
 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x2032, quirk_no_aersid);
 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x2033, quirk_no_aersid);
+
+/* FLR may cause some 82579 devices to hang. */
+static void quirk_intel_no_flr(struct pci_dev *dev)
+{
+	dev->dev_flags |= PCI_DEV_FLAGS_NO_FLR_RESET;
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x1502, quirk_intel_no_flr);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x1503, quirk_intel_no_flr);

drivers/pci/search.c

···
 
 		tmp = bus->self;
 
+		/* stop at bridge where translation unit is associated */
+		if (tmp->dev_flags & PCI_DEV_FLAGS_BRIDGE_XLATE_ROOT)
+			return ret;
+
 		/*
 		 * PCIe-to-PCI/X bridges alias transactions from downstream
 		 * devices using the subordinate bus number (PCI Express to

drivers/pci/setup-bus.c

···
 				r->flags = 0;
 				continue;
 			}
-			size += r_size;
+			size += max(r_size, align);
 			/* Exclude ranges with size > align from
 			   calculation of the alignment. */
-			if (r_size == align)
+			if (r_size <= align)
 				aligns[order] += align;
 			if (order > max_order)
 				max_order = order;

drivers/pci/setup-res.c

···
 		mask = (u32)PCI_BASE_ADDRESS_IO_MASK;
 		new |= res->flags & ~PCI_BASE_ADDRESS_IO_MASK;
 	} else if (resno == PCI_ROM_RESOURCE) {
-		mask = (u32)PCI_ROM_ADDRESS_MASK;
+		mask = PCI_ROM_ADDRESS_MASK;
 	} else {
 		mask = (u32)PCI_BASE_ADDRESS_MEM_MASK;
 		new |= res->flags & ~PCI_BASE_ADDRESS_MEM_MASK;

drivers/pci/switch/Kconfig

···
+menu "PCI switch controller drivers"
+	depends on PCI
+
+config PCI_SW_SWITCHTEC
+	tristate "MicroSemi Switchtec PCIe Switch Management Driver"
+	help
+	 Enables support for the management interface for the MicroSemi
+	 Switchtec series of PCIe switches. Supports userspace access
+	 to submit MRPC commands to the switch via /dev/switchtecX
+	 devices. See <file:Documentation/switchtec.txt> for more
+	 information.
+
+endmenu

drivers/pci/switch/Makefile

···
+obj-$(CONFIG_PCI_SW_SWITCHTEC) += switchtec.o

drivers/pci/switch/switchtec.c

···
+/*
+ * Microsemi Switchtec(tm) PCIe Management Driver
+ * Copyright (c) 2017, Microsemi Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ */
+
+#include <linux/switchtec_ioctl.h>
+
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/fs.h>
+#include <linux/uaccess.h>
+#include <linux/poll.h>
+#include <linux/pci.h>
+#include <linux/cdev.h>
+#include <linux/wait.h>
+
+MODULE_DESCRIPTION("Microsemi Switchtec(tm) PCIe Management Driver");
+MODULE_VERSION("0.1");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Microsemi Corporation");
+
+static int max_devices = 16;
+module_param(max_devices, int, 0644);
+MODULE_PARM_DESC(max_devices, "max number of switchtec device instances");
+
+static dev_t switchtec_devt;
+static struct class *switchtec_class;
+static DEFINE_IDA(switchtec_minor_ida);
+
+#define MICROSEMI_VENDOR_ID         0x11f8
+#define MICROSEMI_NTB_CLASSCODE     0x068000
+#define MICROSEMI_MGMT_CLASSCODE    0x058000
+
+#define SWITCHTEC_MRPC_PAYLOAD_SIZE 1024
+#define SWITCHTEC_MAX_PFF_CSR 48
+
+#define SWITCHTEC_EVENT_OCCURRED BIT(0)
+#define SWITCHTEC_EVENT_CLEAR    BIT(0)
+#define SWITCHTEC_EVENT_EN_LOG   BIT(1)
+#define SWITCHTEC_EVENT_EN_CLI   BIT(2)
+#define SWITCHTEC_EVENT_EN_IRQ   BIT(3)
+#define SWITCHTEC_EVENT_FATAL    BIT(4)
+
+enum {
+	SWITCHTEC_GAS_MRPC_OFFSET       = 0x0000,
+	SWITCHTEC_GAS_TOP_CFG_OFFSET    = 0x1000,
+	SWITCHTEC_GAS_SW_EVENT_OFFSET   = 0x1800,
+	SWITCHTEC_GAS_SYS_INFO_OFFSET   = 0x2000,
+	SWITCHTEC_GAS_FLASH_INFO_OFFSET = 0x2200,
+	SWITCHTEC_GAS_PART_CFG_OFFSET   = 0x4000,
+	SWITCHTEC_GAS_NTB_OFFSET        = 0x10000,
+	SWITCHTEC_GAS_PFF_CSR_OFFSET    = 0x134000,
+};
+
+struct mrpc_regs {
+	u8 input_data[SWITCHTEC_MRPC_PAYLOAD_SIZE];
+	u8 output_data[SWITCHTEC_MRPC_PAYLOAD_SIZE];
+	u32 cmd;
+	u32 status;
+	u32 ret_value;
+} __packed;
+
+enum mrpc_status {
+	SWITCHTEC_MRPC_STATUS_INPROGRESS = 1,
+	SWITCHTEC_MRPC_STATUS_DONE = 2,
+	SWITCHTEC_MRPC_STATUS_ERROR = 0xFF,
+	SWITCHTEC_MRPC_STATUS_INTERRUPTED = 0x100,
+};
+
+struct sw_event_regs {
+	u64 event_report_ctrl;
+	u64 reserved1;
+	u64 part_event_bitmap;
+	u64 reserved2;
+	u32 global_summary;
+	u32 reserved3[3];
+	u32 stack_error_event_hdr;
+	u32 stack_error_event_data;
+	u32 reserved4[4];
+	u32 ppu_error_event_hdr;
+	u32 ppu_error_event_data;
+	u32 reserved5[4];
+	u32 isp_error_event_hdr;
+	u32 isp_error_event_data;
+	u32 reserved6[4];
+	u32 sys_reset_event_hdr;
+	u32 reserved7[5];
+	u32 fw_exception_hdr;
+	u32 reserved8[5];
+	u32 fw_nmi_hdr;
+	u32 reserved9[5];
+	u32 fw_non_fatal_hdr;
+	u32 reserved10[5];
+	u32 fw_fatal_hdr;
+	u32 reserved11[5];
+	u32 twi_mrpc_comp_hdr;
+	u32 twi_mrpc_comp_data;
+	u32 reserved12[4];
+	u32 twi_mrpc_comp_async_hdr;
+	u32 twi_mrpc_comp_async_data;
+	u32 reserved13[4];
+	u32 cli_mrpc_comp_hdr;
+	u32 cli_mrpc_comp_data;
+	u32 reserved14[4];
+	u32 cli_mrpc_comp_async_hdr;
+	u32 cli_mrpc_comp_async_data;
+	u32 reserved15[4];
+	u32 gpio_interrupt_hdr;
+	u32 gpio_interrupt_data;
+	u32 reserved16[4];
+} __packed;
+
+struct sys_info_regs {
+	u32 device_id;
+	u32 device_version;
+	u32 firmware_version;
+	u32 reserved1;
+	u32 vendor_table_revision;
+	u32 table_format_version;
+	u32 partition_id;
+	u32 cfg_file_fmt_version;
+	u32 reserved2[58];
+	char vendor_id[8];
+	char product_id[16];
+	char product_revision[4];
+	char component_vendor[8];
+	u16 component_id;
+	u8 component_revision;
+} __packed;
+
+struct flash_info_regs {
+	u32 flash_part_map_upd_idx;
+
+	struct active_partition_info {
+		u32 address;
+		u32 build_version;
+		u32 build_string;
+	} active_img;
+
+	struct active_partition_info active_cfg;
+	struct active_partition_info inactive_img;
+	struct active_partition_info inactive_cfg;
+
+	u32 flash_length;
+
+	struct partition_info {
+		u32 address;
+		u32 length;
+	} cfg0;
+
+	struct partition_info cfg1;
+	struct partition_info img0;
+	struct partition_info img1;
+	struct partition_info nvlog;
+	struct partition_info vendor[8];
+};
+
+struct ntb_info_regs {
+	u8  partition_count;
+	u8  partition_id;
+	u16 reserved1;
+	u64 ep_map;
+	u16 requester_id;
+} __packed;
+
+struct part_cfg_regs {
+	u32 status;
+	u32 state;
+	u32 port_cnt;
+	u32 usp_port_mode;
+	u32 usp_pff_inst_id;
+	u32 vep_pff_inst_id;
+	u32 dsp_pff_inst_id[47];
+	u32 reserved1[11];
+	u16 vep_vector_number;
+	u16 usp_vector_number;
+	u32 port_event_bitmap;
+	u32 reserved2[3];
+	u32 part_event_summary;
+	u32 reserved3[3];
+	u32 part_reset_hdr;
+	u32 part_reset_data[5];
+	u32 mrpc_comp_hdr;
+	u32 mrpc_comp_data[5];
+	u32 mrpc_comp_async_hdr;
+	u32 mrpc_comp_async_data[5];
+	u32 dyn_binding_hdr;
+	u32 dyn_binding_data[5];
+	u32 reserved4[159];
+} __packed;
+
+enum {
+	SWITCHTEC_PART_CFG_EVENT_RESET = 1 << 0,
+	SWITCHTEC_PART_CFG_EVENT_MRPC_CMP = 1 << 1,
+	SWITCHTEC_PART_CFG_EVENT_MRPC_ASYNC_CMP = 1 << 2,
+	SWITCHTEC_PART_CFG_EVENT_DYN_PART_CMP = 1 << 3,
+};
+
+struct pff_csr_regs {
+	u16 vendor_id;
+	u16 device_id;
+	u32 pci_cfg_header[15];
+	u32 pci_cap_region[48];
+	u32 pcie_cap_region[448];
+	u32 indirect_gas_window[128];
+	u32 indirect_gas_window_off;
+	u32 reserved[127];
+	u32 pff_event_summary;
+	u32 reserved2[3];
+	u32 aer_in_p2p_hdr;
+	u32 aer_in_p2p_data[5];
+	u32 aer_in_vep_hdr;
+	u32 aer_in_vep_data[5];
+	u32 dpc_hdr;
+	u32 dpc_data[5];
+	u32 cts_hdr;
+	u32 cts_data[5];
+	u32 reserved3[6];
+	u32 hotplug_hdr;
+	u32 hotplug_data[5];
+	u32 ier_hdr;
+	u32 ier_data[5];
+	u32 threshold_hdr;
+	u32 threshold_data[5];
+	u32 power_mgmt_hdr;
+	u32 power_mgmt_data[5];
+	u32 tlp_throttling_hdr;
+	u32 tlp_throttling_data[5];
+	u32 force_speed_hdr;
+	u32 force_speed_data[5];
+	u32 credit_timeout_hdr;
+	u32 credit_timeout_data[5];
+	u32 link_state_hdr;
+	u32 link_state_data[5];
+	u32 reserved4[174];
+} __packed;
+
+struct switchtec_dev {
+	struct pci_dev *pdev;
+	struct device dev;
+	struct cdev cdev;
+
+	int partition;
+	int partition_count;
+	int pff_csr_count;
+	char pff_local[SWITCHTEC_MAX_PFF_CSR];
+
+	void __iomem *mmio;
+	struct mrpc_regs __iomem *mmio_mrpc;
+	struct sw_event_regs __iomem *mmio_sw_event;
+	struct sys_info_regs __iomem *mmio_sys_info;
+	struct flash_info_regs __iomem *mmio_flash_info;
+	struct ntb_info_regs __iomem *mmio_ntb;
+	struct part_cfg_regs __iomem *mmio_part_cfg;
+	struct part_cfg_regs __iomem *mmio_part_cfg_all;
+	struct pff_csr_regs __iomem *mmio_pff_csr;
+
+	/*
+	 * The mrpc mutex must be held when accessing the other
+	 * mrpc_ fields, alive flag and stuser->state field
+	 */
+	struct mutex mrpc_mutex;
+	struct list_head mrpc_queue;
+	int mrpc_busy;
+	struct work_struct mrpc_work;
+	struct delayed_work mrpc_timeout;
+	bool alive;
+
+	wait_queue_head_t event_wq;
+	atomic_t event_cnt;
+};
+
+static struct switchtec_dev *to_stdev(struct device *dev)
+{
+	return container_of(dev, struct switchtec_dev, dev);
+}
+
+enum mrpc_state {
+	MRPC_IDLE = 0,
+	MRPC_QUEUED,
+	MRPC_RUNNING,
+	MRPC_DONE,
+};
+
+struct switchtec_user {
+	struct switchtec_dev *stdev;
+
+	enum mrpc_state state;
+
+	struct completion comp;
+	struct kref kref;
+	struct list_head list;
+
+	u32 cmd;
+	u32 status;
+	u32 return_code;
+	size_t data_len;
+	size_t read_len;
+	unsigned char data[SWITCHTEC_MRPC_PAYLOAD_SIZE];
+	int event_cnt;
+};
+
+static struct switchtec_user *stuser_create(struct switchtec_dev *stdev)
+{
+	struct switchtec_user *stuser;
+
+	stuser = kzalloc(sizeof(*stuser), GFP_KERNEL);
+	if (!stuser)
+		return ERR_PTR(-ENOMEM);
+
+	get_device(&stdev->dev);
+	stuser->stdev = stdev;
+	kref_init(&stuser->kref);
+	INIT_LIST_HEAD(&stuser->list);
+	init_completion(&stuser->comp);
+	stuser->event_cnt = atomic_read(&stdev->event_cnt);
+
+	dev_dbg(&stdev->dev, "%s: %p\n", __func__, stuser);
+
+	return stuser;
+}
+
+static void stuser_free(struct kref *kref)
+{
+	struct switchtec_user *stuser;
+
+	stuser = container_of(kref, struct switchtec_user, kref);
+
+	dev_dbg(&stuser->stdev->dev, "%s: %p\n", __func__, stuser);
+
+	put_device(&stuser->stdev->dev);
+	kfree(stuser);
+}
+
+static void stuser_put(struct switchtec_user *stuser)
+{
+	kref_put(&stuser->kref, stuser_free);
+}
+
+static void stuser_set_state(struct switchtec_user *stuser,
+			     enum mrpc_state state)
+{
+	/* requires the mrpc_mutex to already be held when called */
+
+	const char * const state_names[] = {
+		[MRPC_IDLE] = "IDLE",
+		[MRPC_QUEUED] = "QUEUED",
+		[MRPC_RUNNING] = "RUNNING",
+		[MRPC_DONE] = "DONE",
+	};
+
+	stuser->state = state;
+
+	dev_dbg(&stuser->stdev->dev, "stuser state %p -> %s",
+		stuser, state_names[state]);
+}
+
+static void mrpc_complete_cmd(struct switchtec_dev *stdev);
+
+static void mrpc_cmd_submit(struct switchtec_dev *stdev)
+{
+	/* requires the mrpc_mutex to already be held when called */
+
+	struct switchtec_user *stuser;
+
+	if (stdev->mrpc_busy)
+		return;
+
+	if (list_empty(&stdev->mrpc_queue))
+		return;
+
+	stuser = list_entry(stdev->mrpc_queue.next, struct switchtec_user,
+			    list);
+
+	stuser_set_state(stuser, MRPC_RUNNING);
+	stdev->mrpc_busy = 1;
+	memcpy_toio(&stdev->mmio_mrpc->input_data,
+		    stuser->data, stuser->data_len);
+	iowrite32(stuser->cmd, &stdev->mmio_mrpc->cmd);
+
+	stuser->status = ioread32(&stdev->mmio_mrpc->status);
+	if (stuser->status != SWITCHTEC_MRPC_STATUS_INPROGRESS)
+		mrpc_complete_cmd(stdev);
+
+	schedule_delayed_work(&stdev->mrpc_timeout,
+			      msecs_to_jiffies(500));
+}
+
+static int mrpc_queue_cmd(struct switchtec_user *stuser)
+{
+	/* requires the mrpc_mutex to already be held when called */
+
+	struct switchtec_dev *stdev = stuser->stdev;
+
+	kref_get(&stuser->kref);
+	stuser->read_len = sizeof(stuser->data);
+	stuser_set_state(stuser, MRPC_QUEUED);
+	init_completion(&stuser->comp);
+	list_add_tail(&stuser->list, &stdev->mrpc_queue);
+
+	mrpc_cmd_submit(stdev);
+
+	return 0;
+}
+
+static void mrpc_complete_cmd(struct switchtec_dev *stdev)
+{
+	/* requires the mrpc_mutex to already be held when called */
+	struct switchtec_user *stuser;
+
+	if (list_empty(&stdev->mrpc_queue))
+		return;
+
+	stuser = list_entry(stdev->mrpc_queue.next, struct switchtec_user,
+			    list);
+
+	stuser->status = ioread32(&stdev->mmio_mrpc->status);
+	if (stuser->status == SWITCHTEC_MRPC_STATUS_INPROGRESS)
+		return;
+
+	stuser_set_state(stuser, MRPC_DONE);
+	stuser->return_code = 0;
+
+	if (stuser->status != SWITCHTEC_MRPC_STATUS_DONE)
+		goto out;
+
+	stuser->return_code = ioread32(&stdev->mmio_mrpc->ret_value);
+	if (stuser->return_code != 0)
+		goto out;
+
+	memcpy_fromio(stuser->data, &stdev->mmio_mrpc->output_data,
+		      stuser->read_len);
+
+out:
+	complete_all(&stuser->comp);
+	list_del_init(&stuser->list);
+	stuser_put(stuser);
+	stdev->mrpc_busy = 0;
+
+	mrpc_cmd_submit(stdev);
+}
+
+static void mrpc_event_work(struct work_struct *work)
+{
+	struct switchtec_dev *stdev;
+
+	stdev = container_of(work, struct switchtec_dev, mrpc_work);
+
+	dev_dbg(&stdev->dev, "%s\n", __func__);
+
+	mutex_lock(&stdev->mrpc_mutex);
+	cancel_delayed_work(&stdev->mrpc_timeout);
+	mrpc_complete_cmd(stdev);
+	mutex_unlock(&stdev->mrpc_mutex);
+}
+
+static void mrpc_timeout_work(struct work_struct *work)
+{
+	struct switchtec_dev *stdev;
+	u32 status;
+
+	stdev = container_of(work, struct switchtec_dev, mrpc_timeout.work);
+
+	dev_dbg(&stdev->dev, "%s\n", __func__);
+
+	mutex_lock(&stdev->mrpc_mutex);
+
+	status = ioread32(&stdev->mmio_mrpc->status);
+	if (status == SWITCHTEC_MRPC_STATUS_INPROGRESS) {
+		schedule_delayed_work(&stdev->mrpc_timeout,
+				      msecs_to_jiffies(500));
+		goto out;
+	}
+
+	mrpc_complete_cmd(stdev);
+
+out:
+	mutex_unlock(&stdev->mrpc_mutex);
+}
+
+static ssize_t device_version_show(struct device *dev,
+	struct device_attribute *attr, char *buf)
+{
+	struct switchtec_dev *stdev = to_stdev(dev);
+	u32 ver;
+
+	ver = ioread32(&stdev->mmio_sys_info->device_version);
+
+	return sprintf(buf, "%x\n", ver);
+}
+static DEVICE_ATTR_RO(device_version);
+
+static ssize_t fw_version_show(struct device *dev,
+	struct device_attribute *attr, char *buf)
+{
+	struct switchtec_dev *stdev = to_stdev(dev);
+	u32 ver;
+
+	ver = ioread32(&stdev->mmio_sys_info->firmware_version);
+
+	return sprintf(buf, "%08x\n", ver);
+}
+static DEVICE_ATTR_RO(fw_version);
+
+static ssize_t io_string_show(char *buf, void __iomem *attr, size_t len)
+{
+	int i;
+
+	memcpy_fromio(buf, attr, len);
+	buf[len] = '\n';
+	buf[len + 1] = 0;
+
+	for (i = len - 1; i > 0; i--) {
+		if (buf[i] != ' ')
+			break;
+		buf[i] = '\n';
+		buf[i + 1] = 0;
+	}
+
+	return strlen(buf);
+}
+
+#define DEVICE_ATTR_SYS_INFO_STR(field) \
+static ssize_t field ## _show(struct device *dev, \
+	struct device_attribute *attr, char *buf) \
+{ \
+	struct switchtec_dev *stdev = to_stdev(dev); \
+	return io_string_show(buf, &stdev->mmio_sys_info->field, \
+			    sizeof(stdev->mmio_sys_info->field)); \
+} \
+\
+static DEVICE_ATTR_RO(field)
+
+DEVICE_ATTR_SYS_INFO_STR(vendor_id);
+DEVICE_ATTR_SYS_INFO_STR(product_id);
+DEVICE_ATTR_SYS_INFO_STR(product_revision);
+DEVICE_ATTR_SYS_INFO_STR(component_vendor);
+
+static ssize_t component_id_show(struct device *dev,
+	struct device_attribute *attr, char *buf)
+{
+	struct switchtec_dev *stdev = to_stdev(dev);
+	int id = ioread16(&stdev->mmio_sys_info->component_id);
+
+	return sprintf(buf, "PM%04X\n", id);
+}
+static DEVICE_ATTR_RO(component_id);
+
+static ssize_t component_revision_show(struct device *dev,
+	struct device_attribute *attr, char *buf)
+{
+	struct switchtec_dev *stdev = to_stdev(dev);
+	int rev = ioread8(&stdev->mmio_sys_info->component_revision);
+
+	return sprintf(buf, "%d\n", rev);
+}
+static DEVICE_ATTR_RO(component_revision);
+
+static ssize_t partition_show(struct device *dev,
+	struct device_attribute *attr, char *buf)
+{
+	struct switchtec_dev *stdev = to_stdev(dev);
+
+	return sprintf(buf, "%d\n", stdev->partition);
+}
+static DEVICE_ATTR_RO(partition);
+
+static ssize_t partition_count_show(struct device *dev,
+	struct device_attribute *attr, char *buf)
+{
+	struct switchtec_dev *stdev = to_stdev(dev);
+
+	return sprintf(buf, "%d\n", stdev->partition_count);
+}
+static DEVICE_ATTR_RO(partition_count);
+
+static struct attribute *switchtec_device_attrs[] = {
+	&dev_attr_device_version.attr,
+	&dev_attr_fw_version.attr,
+	&dev_attr_vendor_id.attr,
+	&dev_attr_product_id.attr,
+	&dev_attr_product_revision.attr,
+	&dev_attr_component_vendor.attr,
+	&dev_attr_component_id.attr,
+	&dev_attr_component_revision.attr,
+	&dev_attr_partition.attr,
+	&dev_attr_partition_count.attr,
+	NULL,
+};
+
+ATTRIBUTE_GROUPS(switchtec_device);
+
+static int switchtec_dev_open(struct inode *inode, struct file *filp)
+{
+	struct switchtec_dev *stdev;
+	struct switchtec_user *stuser;
+
+	stdev = container_of(inode->i_cdev, struct switchtec_dev, cdev);
+
+	stuser = stuser_create(stdev);
+	if (IS_ERR(stuser))
+		return PTR_ERR(stuser);
+
+	filp->private_data = stuser;
+	nonseekable_open(inode, filp);
+
+	dev_dbg(&stdev->dev, "%s: %p\n", __func__, stuser);
+
+	return 0;
+}
+
+static int switchtec_dev_release(struct inode *inode, struct file *filp)
+{
+	struct switchtec_user *stuser = filp->private_data;
+
+	stuser_put(stuser);
+
+	return 0;
+}
+
+static int lock_mutex_and_test_alive(struct switchtec_dev *stdev)
+{
+	if (mutex_lock_interruptible(&stdev->mrpc_mutex))
+		return -EINTR;
+
+	if (!stdev->alive) {
+		mutex_unlock(&stdev->mrpc_mutex);
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+static ssize_t switchtec_dev_write(struct file *filp, const char __user *data,
+				   size_t size, loff_t *off)
+{
+	struct switchtec_user *stuser = filp->private_data;
+	struct switchtec_dev *stdev = stuser->stdev;
+	int rc;
+
+	if (size < sizeof(stuser->cmd) ||
+	    size > sizeof(stuser->cmd) + sizeof(stuser->data))
+		return -EINVAL;
+
+	stuser->data_len = size - sizeof(stuser->cmd);
+
+	rc = lock_mutex_and_test_alive(stdev);
+	if (rc)
+		return rc;
+
+	if (stuser->state != MRPC_IDLE) {
+		rc = -EBADE;
+		goto out;
+	}
+
+	rc = copy_from_user(&stuser->cmd, data, sizeof(stuser->cmd));
+	if (rc) {
+		rc = -EFAULT;
+		goto out;
+	}
+
+	data += sizeof(stuser->cmd);
+	rc = copy_from_user(&stuser->data, data, size - sizeof(stuser->cmd));
+	if (rc) {
+		rc = -EFAULT;
+		goto out;
+	}
+
+	rc = mrpc_queue_cmd(stuser);
+
+out:
+	mutex_unlock(&stdev->mrpc_mutex);
+
+	if (rc)
+		return rc;
+
+	return size;
+}
+
+static ssize_t switchtec_dev_read(struct file *filp, char __user *data,
+				  size_t size, loff_t *off)
+{
+	struct switchtec_user *stuser = filp->private_data;
+	struct switchtec_dev *stdev = stuser->stdev;
+	int rc;
+
+	if (size < sizeof(stuser->cmd) ||
+	    size > sizeof(stuser->cmd) + sizeof(stuser->data))
+		return -EINVAL;
+
+	rc = lock_mutex_and_test_alive(stdev);
+	if (rc)
+		return rc;
+
+	if (stuser->state == MRPC_IDLE) {
+		mutex_unlock(&stdev->mrpc_mutex);
+		return -EBADE;
+	}
+
+	stuser->read_len = size - sizeof(stuser->return_code);
+
+	mutex_unlock(&stdev->mrpc_mutex);
+
+	if (filp->f_flags & O_NONBLOCK) {
+		if (!try_wait_for_completion(&stuser->comp))
+			return -EAGAIN;
+	} else {
+		rc = wait_for_completion_interruptible(&stuser->comp);
+		if (rc < 0)
+			return rc;
+	}
+
+	rc = lock_mutex_and_test_alive(stdev);
+	if (rc)
+		return rc;
+
+	if (stuser->state != MRPC_DONE) {
+		mutex_unlock(&stdev->mrpc_mutex);
+		return -EBADE;
+	}
+
+	rc = copy_to_user(data, &stuser->return_code,
+			  sizeof(stuser->return_code));
+	if (rc) {
+		rc = -EFAULT;
+		goto out;
+	}
+
+	data += sizeof(stuser->return_code);
+	rc = copy_to_user(data, &stuser->data,
+			  size - sizeof(stuser->return_code));
+	if (rc) {
+		rc = -EFAULT;
+		goto out;
+	}
+
+	stuser_set_state(stuser, MRPC_IDLE);
+
+out:
+	mutex_unlock(&stdev->mrpc_mutex);
+
+	if (stuser->status == SWITCHTEC_MRPC_STATUS_DONE)
+		return size;
+	else if (stuser->status == SWITCHTEC_MRPC_STATUS_INTERRUPTED)
+		return -ENXIO;
+	else
+		return -EBADMSG;
+}
+
+static unsigned int switchtec_dev_poll(struct file *filp, poll_table *wait)
+{
+	struct switchtec_user *stuser = filp->private_data;
+	struct switchtec_dev *stdev = stuser->stdev;
+	int ret = 0;
+
+	poll_wait(filp, &stuser->comp.wait, wait);
+	poll_wait(filp, &stdev->event_wq, wait);
+
+	if (lock_mutex_and_test_alive(stdev))
+		return POLLIN | POLLRDHUP | POLLOUT | POLLERR | POLLHUP;
+
+	mutex_unlock(&stdev->mrpc_mutex);
+
+	if (try_wait_for_completion(&stuser->comp))
+		ret |= POLLIN | POLLRDNORM;
+
+	if (stuser->event_cnt != atomic_read(&stdev->event_cnt))
+		ret |= POLLPRI | POLLRDBAND;
+
+	return ret;
+}
+
+static int ioctl_flash_info(struct switchtec_dev *stdev,
+			    struct switchtec_ioctl_flash_info __user *uinfo)
+{
+	struct switchtec_ioctl_flash_info info = {0};
+	struct flash_info_regs __iomem *fi = stdev->mmio_flash_info;
+
+	info.flash_length = ioread32(&fi->flash_length);
+	info.num_partitions = SWITCHTEC_IOCTL_NUM_PARTITIONS;
+
+	if (copy_to_user(uinfo, &info, sizeof(info)))
+		return -EFAULT;
+
+	return 0;
+}
+
+static void set_fw_info_part(struct switchtec_ioctl_flash_part_info *info,
+			     struct partition_info __iomem *pi)
+{
+	info->address = ioread32(&pi->address);
+	info->length = ioread32(&pi->length);
+}
+
+static int ioctl_flash_part_info(struct switchtec_dev *stdev,
+	struct switchtec_ioctl_flash_part_info __user *uinfo)
+{
+	struct switchtec_ioctl_flash_part_info info = {0};
+	struct flash_info_regs __iomem *fi = stdev->mmio_flash_info;
+	u32 active_addr = -1;
+
+	if (copy_from_user(&info, uinfo, sizeof(info)))
+		return -EFAULT;
+
+	switch (info.flash_partition) {
+	case SWITCHTEC_IOCTL_PART_CFG0:
+		active_addr = ioread32(&fi->active_cfg);
+		set_fw_info_part(&info, &fi->cfg0);
+		break;
+	case SWITCHTEC_IOCTL_PART_CFG1:
+		active_addr = ioread32(&fi->active_cfg);
+		set_fw_info_part(&info, &fi->cfg1);
+		break;
+	case SWITCHTEC_IOCTL_PART_IMG0:
+		active_addr = ioread32(&fi->active_img);
+		set_fw_info_part(&info, &fi->img0);
+		break;
+	case SWITCHTEC_IOCTL_PART_IMG1:
+		active_addr = ioread32(&fi->active_img);
+		set_fw_info_part(&info, &fi->img1);
+		break;
+	case SWITCHTEC_IOCTL_PART_NVLOG:
+		set_fw_info_part(&info, &fi->nvlog);
+		break;
+	case SWITCHTEC_IOCTL_PART_VENDOR0:
+		set_fw_info_part(&info, &fi->vendor[0]);
+		break;
+	case SWITCHTEC_IOCTL_PART_VENDOR1:
+		set_fw_info_part(&info, &fi->vendor[1]);
+		break;
+	case SWITCHTEC_IOCTL_PART_VENDOR2:
+		set_fw_info_part(&info, &fi->vendor[2]);
+		break;
+	case SWITCHTEC_IOCTL_PART_VENDOR3:
+		set_fw_info_part(&info, &fi->vendor[3]);
+		break;
+	case SWITCHTEC_IOCTL_PART_VENDOR4:
+		set_fw_info_part(&info, &fi->vendor[4]);
+		break;
+	case SWITCHTEC_IOCTL_PART_VENDOR5:
+		set_fw_info_part(&info, &fi->vendor[5]);
+		break;
+	case SWITCHTEC_IOCTL_PART_VENDOR6:
+		set_fw_info_part(&info, &fi->vendor[6]);
+		break;
+	case SWITCHTEC_IOCTL_PART_VENDOR7:
+		set_fw_info_part(&info, &fi->vendor[7]);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	if (info.address == active_addr)
+		info.active = 1;
+
+	if (copy_to_user(uinfo, &info, sizeof(info)))
+		return -EFAULT;
+
+	return 0;
+}
+
+static int ioctl_event_summary(struct switchtec_dev *stdev,
+	struct switchtec_user *stuser,
+	struct switchtec_ioctl_event_summary __user *usum)
+{
+	struct switchtec_ioctl_event_summary s = {0};
+	int i;
+	u32 reg;
+
+	s.global = ioread32(&stdev->mmio_sw_event->global_summary);
+	s.part_bitmap = ioread32(&stdev->mmio_sw_event->part_event_bitmap);
+	s.local_part = ioread32(&stdev->mmio_part_cfg->part_event_summary);
+
+	for (i = 0; i < stdev->partition_count; i++) {
+		reg = ioread32(&stdev->mmio_part_cfg_all[i].part_event_summary);
+		s.part[i] = reg;
+	}
+
+	for (i = 0; i < SWITCHTEC_MAX_PFF_CSR; i++) {
+		reg = ioread16(&stdev->mmio_pff_csr[i].vendor_id);
+		if (reg != MICROSEMI_VENDOR_ID)
+			break;
+
+		reg = ioread32(&stdev->mmio_pff_csr[i].pff_event_summary);
+		s.pff[i] = reg;
+	}
+
+	if (copy_to_user(usum, &s, sizeof(s)))
+		return -EFAULT;
+
+	stuser->event_cnt = atomic_read(&stdev->event_cnt);
+
+	return 0;
+}
+
+static u32 __iomem *global_ev_reg(struct switchtec_dev *stdev,
+				  size_t offset, int index)
+{
+	return (void __iomem *)stdev->mmio_sw_event + offset;
+}
+
+static u32 __iomem *part_ev_reg(struct switchtec_dev *stdev,
+				size_t offset, int index)
+{
+	return (void __iomem *)&stdev->mmio_part_cfg_all[index] + offset;
+}
+
+static u32 __iomem *pff_ev_reg(struct switchtec_dev *stdev,
+			       size_t offset, int index)
+{
+	return (void __iomem *)&stdev->mmio_pff_csr[index] + offset;
+}
+
+#define EV_GLB(i, r)[i] = {offsetof(struct sw_event_regs, r), global_ev_reg}
+#define EV_PAR(i, r)[i] = {offsetof(struct part_cfg_regs, r), part_ev_reg}
+#define EV_PFF(i, r)[i] = {offsetof(struct pff_csr_regs, r), pff_ev_reg}
+
+const struct event_reg {
+	size_t offset;
+	u32 __iomem *(*map_reg)(struct switchtec_dev *stdev,
+				size_t offset, int index);
+} event_regs[] = {
+	EV_GLB(SWITCHTEC_IOCTL_EVENT_STACK_ERROR, stack_error_event_hdr),
+	EV_GLB(SWITCHTEC_IOCTL_EVENT_PPU_ERROR, ppu_error_event_hdr),
+	EV_GLB(SWITCHTEC_IOCTL_EVENT_ISP_ERROR, isp_error_event_hdr),
+	EV_GLB(SWITCHTEC_IOCTL_EVENT_SYS_RESET, sys_reset_event_hdr),
+	EV_GLB(SWITCHTEC_IOCTL_EVENT_FW_EXC, fw_exception_hdr),
+	EV_GLB(SWITCHTEC_IOCTL_EVENT_FW_NMI, fw_nmi_hdr),
+	EV_GLB(SWITCHTEC_IOCTL_EVENT_FW_NON_FATAL, fw_non_fatal_hdr),
+	EV_GLB(SWITCHTEC_IOCTL_EVENT_FW_FATAL, fw_fatal_hdr),
+	EV_GLB(SWITCHTEC_IOCTL_EVENT_TWI_MRPC_COMP, twi_mrpc_comp_hdr),
+	EV_GLB(SWITCHTEC_IOCTL_EVENT_TWI_MRPC_COMP_ASYNC,
+	       twi_mrpc_comp_async_hdr),
+	EV_GLB(SWITCHTEC_IOCTL_EVENT_CLI_MRPC_COMP, cli_mrpc_comp_hdr),
+	EV_GLB(SWITCHTEC_IOCTL_EVENT_CLI_MRPC_COMP_ASYNC,
+	       cli_mrpc_comp_async_hdr),
+	EV_GLB(SWITCHTEC_IOCTL_EVENT_GPIO_INT, gpio_interrupt_hdr),
+	EV_PAR(SWITCHTEC_IOCTL_EVENT_PART_RESET, part_reset_hdr),
+	EV_PAR(SWITCHTEC_IOCTL_EVENT_MRPC_COMP, mrpc_comp_hdr),
+	EV_PAR(SWITCHTEC_IOCTL_EVENT_MRPC_COMP_ASYNC, mrpc_comp_async_hdr),
+	EV_PAR(SWITCHTEC_IOCTL_EVENT_DYN_PART_BIND_COMP, dyn_binding_hdr),
+	EV_PFF(SWITCHTEC_IOCTL_EVENT_AER_IN_P2P, aer_in_p2p_hdr),
+	EV_PFF(SWITCHTEC_IOCTL_EVENT_AER_IN_VEP, aer_in_vep_hdr),
+	EV_PFF(SWITCHTEC_IOCTL_EVENT_DPC, dpc_hdr),
+	EV_PFF(SWITCHTEC_IOCTL_EVENT_CTS, cts_hdr),
+	EV_PFF(SWITCHTEC_IOCTL_EVENT_HOTPLUG, hotplug_hdr),
+	EV_PFF(SWITCHTEC_IOCTL_EVENT_IER, ier_hdr),
+	EV_PFF(SWITCHTEC_IOCTL_EVENT_THRESH, threshold_hdr),
+	EV_PFF(SWITCHTEC_IOCTL_EVENT_POWER_MGMT, power_mgmt_hdr),
+	EV_PFF(SWITCHTEC_IOCTL_EVENT_TLP_THROTTLING, tlp_throttling_hdr),
+	EV_PFF(SWITCHTEC_IOCTL_EVENT_FORCE_SPEED, force_speed_hdr),
+	EV_PFF(SWITCHTEC_IOCTL_EVENT_CREDIT_TIMEOUT, credit_timeout_hdr),
+	EV_PFF(SWITCHTEC_IOCTL_EVENT_LINK_STATE, link_state_hdr),
+};
+
+static u32 __iomem *event_hdr_addr(struct switchtec_dev *stdev,
+				   int event_id, int index)
+{
+	size_t off;
+
+	if (event_id < 0 || event_id >= SWITCHTEC_IOCTL_MAX_EVENTS)
+		return ERR_PTR(-EINVAL);
+
+	off = event_regs[event_id].offset;
+
+	if (event_regs[event_id].map_reg == part_ev_reg) {
+		if (index == SWITCHTEC_IOCTL_EVENT_LOCAL_PART_IDX)
+			index = stdev->partition;
+		else if (index < 0 || index >= stdev->partition_count)
+			return ERR_PTR(-EINVAL);
+	} else if (event_regs[event_id].map_reg == pff_ev_reg) {
+		if (index < 0 || index >= stdev->pff_csr_count)
+			return ERR_PTR(-EINVAL);
+	}
+
+	return event_regs[event_id].map_reg(stdev, off, index);
+}
+
+static int event_ctl(struct switchtec_dev *stdev,
+		     struct switchtec_ioctl_event_ctl *ctl)
+{
+	int i;
+	u32 __iomem *reg;
+	u32 hdr;
+
+	reg = event_hdr_addr(stdev, ctl->event_id, ctl->index);
+	if (IS_ERR(reg))
+		return PTR_ERR(reg);
+
+	hdr = ioread32(reg);
+	for (i = 0; i < ARRAY_SIZE(ctl->data); i++)
+		ctl->data[i] = ioread32(&reg[i + 1]);
+
+	ctl->occurred = hdr & SWITCHTEC_EVENT_OCCURRED;
+	ctl->count = (hdr >> 5) & 0xFF;
+
+	if (!(ctl->flags & SWITCHTEC_IOCTL_EVENT_FLAG_CLEAR))
+		hdr &= ~SWITCHTEC_EVENT_CLEAR;
+	if (ctl->flags & SWITCHTEC_IOCTL_EVENT_FLAG_EN_POLL)
+		hdr |= SWITCHTEC_EVENT_EN_IRQ;
+	if (ctl->flags & SWITCHTEC_IOCTL_EVENT_FLAG_DIS_POLL)
+		hdr &= ~SWITCHTEC_EVENT_EN_IRQ;
+	if (ctl->flags & SWITCHTEC_IOCTL_EVENT_FLAG_EN_LOG)
+		hdr |= SWITCHTEC_EVENT_EN_LOG;
+	if (ctl->flags & SWITCHTEC_IOCTL_EVENT_FLAG_DIS_LOG)
+		hdr &= ~SWITCHTEC_EVENT_EN_LOG;
+	if (ctl->flags & SWITCHTEC_IOCTL_EVENT_FLAG_EN_CLI)
+		hdr |= SWITCHTEC_EVENT_EN_CLI;
+	if (ctl->flags & SWITCHTEC_IOCTL_EVENT_FLAG_DIS_CLI)
+		hdr &= ~SWITCHTEC_EVENT_EN_CLI;
+	if (ctl->flags & SWITCHTEC_IOCTL_EVENT_FLAG_EN_FATAL)
+		hdr |= SWITCHTEC_EVENT_FATAL;
+	if (ctl->flags & SWITCHTEC_IOCTL_EVENT_FLAG_DIS_FATAL)
+		hdr &= ~SWITCHTEC_EVENT_FATAL;
+
+	if (ctl->flags)
+		iowrite32(hdr, reg);
+
+	ctl->flags = 0;
+	if (hdr & SWITCHTEC_EVENT_EN_IRQ)
+		ctl->flags |= SWITCHTEC_IOCTL_EVENT_FLAG_EN_POLL;
+	if (hdr & SWITCHTEC_EVENT_EN_LOG)
+		ctl->flags |= SWITCHTEC_IOCTL_EVENT_FLAG_EN_LOG;
+	if (hdr & SWITCHTEC_EVENT_EN_CLI)
+		ctl->flags |= SWITCHTEC_IOCTL_EVENT_FLAG_EN_CLI;
+	if (hdr & SWITCHTEC_EVENT_FATAL)
+		ctl->flags |= SWITCHTEC_IOCTL_EVENT_FLAG_EN_FATAL;
+
+	return 0;
+}
+
+static int ioctl_event_ctl(struct switchtec_dev *stdev,
+	struct switchtec_ioctl_event_ctl __user *uctl)
+{
+	int ret;
+	int nr_idxs;
+	struct switchtec_ioctl_event_ctl ctl;
+
+	if (copy_from_user(&ctl, uctl, sizeof(ctl)))
+		return -EFAULT;
+
+	if (ctl.event_id >= SWITCHTEC_IOCTL_MAX_EVENTS)
+		return -EINVAL;
+
+	if (ctl.flags & SWITCHTEC_IOCTL_EVENT_FLAG_UNUSED)
+		return -EINVAL;
+
+	if (ctl.index == SWITCHTEC_IOCTL_EVENT_IDX_ALL) {
+		if (event_regs[ctl.event_id].map_reg == global_ev_reg)
+			nr_idxs = 1;
+		else if (event_regs[ctl.event_id].map_reg == part_ev_reg)
+			nr_idxs = stdev->partition_count;
+		else if (event_regs[ctl.event_id].map_reg == pff_ev_reg)
+			nr_idxs = stdev->pff_csr_count;
+		else
+			return -EINVAL;
+
+		for (ctl.index = 0; ctl.index < nr_idxs; ctl.index++) {
+			ret = event_ctl(stdev, &ctl);
+			if (ret < 0)
+				return ret;
+		}
+	} else {
+		ret = event_ctl(stdev, &ctl);
+		if (ret < 0)
+			return ret;
+	}
+
+	if (copy_to_user(uctl, &ctl, sizeof(ctl)))
+		return -EFAULT;
+
+	return 0;
+}
+
+static int ioctl_pff_to_port(struct switchtec_dev *stdev,
+			     struct switchtec_ioctl_pff_port *up)
+{
+	int i, part;
+	u32 reg;
+	struct part_cfg_regs *pcfg;
+	struct switchtec_ioctl_pff_port p;
+
+	if (copy_from_user(&p, up, sizeof(p)))
+		return -EFAULT;
+
+	p.port = -1;
+	for (part = 0; part < stdev->partition_count; part++) {
+		pcfg = &stdev->mmio_part_cfg_all[part];
+		p.partition = part;
+
+		reg = ioread32(&pcfg->usp_pff_inst_id);
+		if (reg == p.pff) {
+			p.port = 0;
+			break;
+		}
+
+		reg = ioread32(&pcfg->vep_pff_inst_id);
+		if (reg == p.pff) {
+			p.port = SWITCHTEC_IOCTL_PFF_VEP;
+			break;
+		}
+
+		for (i = 0; i < ARRAY_SIZE(pcfg->dsp_pff_inst_id); i++) {
+			reg = ioread32(&pcfg->dsp_pff_inst_id[i]);
+			if (reg != p.pff)
+				continue;
+
+			p.port = i + 1;
+			break;
+		}
+
+		if (p.port != -1)
+			break;
+	}
+
+	if (copy_to_user(up, &p, sizeof(p)))
+		return -EFAULT;
+
+	return 0;
+}
+
+static int ioctl_port_to_pff(struct switchtec_dev *stdev,
+			     struct switchtec_ioctl_pff_port *up)
+{
+	struct switchtec_ioctl_pff_port p;
+	struct part_cfg_regs *pcfg;
+
+	if (copy_from_user(&p, up, sizeof(p)))
+		return -EFAULT;
+
+	if (p.partition == SWITCHTEC_IOCTL_EVENT_LOCAL_PART_IDX)
+		pcfg = stdev->mmio_part_cfg;
+	else if (p.partition < stdev->partition_count)
+		pcfg = &stdev->mmio_part_cfg_all[p.partition];
+	else
+		return -EINVAL;
+
+	switch (p.port) {
+	case 0:
+		p.pff = ioread32(&pcfg->usp_pff_inst_id);
+		break;
+	case SWITCHTEC_IOCTL_PFF_VEP:
+		p.pff = ioread32(&pcfg->vep_pff_inst_id);
+		break;
+	default:
+		if (p.port > ARRAY_SIZE(pcfg->dsp_pff_inst_id))
+			return -EINVAL;
+		p.pff = ioread32(&pcfg->dsp_pff_inst_id[p.port - 1]);
+		break;
+	}
+
+	if (copy_to_user(up, &p, sizeof(p)))
+		return -EFAULT;
+
+	return 0;
+}
+
+static long switchtec_dev_ioctl(struct file *filp, unsigned int cmd,
+				unsigned long arg)
+{
+	struct switchtec_user *stuser = filp->private_data;
+	struct switchtec_dev *stdev = stuser->stdev;
+	int rc;
+	void __user *argp = (void __user *)arg;
+
+	rc = lock_mutex_and_test_alive(stdev);
+	if (rc)
+		return rc;
+
+	switch (cmd) {
+	case SWITCHTEC_IOCTL_FLASH_INFO:
+		rc = ioctl_flash_info(stdev, argp);
+		break;
+	case SWITCHTEC_IOCTL_FLASH_PART_INFO:
+		rc = ioctl_flash_part_info(stdev, argp);
+		break;
+	case SWITCHTEC_IOCTL_EVENT_SUMMARY:
+		rc = ioctl_event_summary(stdev, stuser, argp);
+		break;
+	case SWITCHTEC_IOCTL_EVENT_CTL:
+		rc = ioctl_event_ctl(stdev, argp);
+		break;
+	case SWITCHTEC_IOCTL_PFF_TO_PORT:
+		rc = ioctl_pff_to_port(stdev, argp);
+		break;
+	case SWITCHTEC_IOCTL_PORT_TO_PFF:
+		rc = ioctl_port_to_pff(stdev, argp);
+		break;
+	default:
+		rc = -ENOTTY;
+		break;
+	}
+
+	mutex_unlock(&stdev->mrpc_mutex);
+	return rc;
+}
+
+static const struct file_operations switchtec_fops = {
+	.owner = THIS_MODULE,
+	.open = switchtec_dev_open,
+	.release = switchtec_dev_release,
+	.write = switchtec_dev_write,
+	.read = switchtec_dev_read,
+	.poll = switchtec_dev_poll,
+	.unlocked_ioctl = switchtec_dev_ioctl,
+	.compat_ioctl = switchtec_dev_ioctl,
+};
+
+static void stdev_release(struct device *dev)
+{
+	struct switchtec_dev *stdev = to_stdev(dev);
+
+	kfree(stdev);
+}
+
+static void stdev_kill(struct switchtec_dev *stdev)
+{
+	struct switchtec_user *stuser, *tmpuser;
+
+	pci_clear_master(stdev->pdev);
+
+	cancel_delayed_work_sync(&stdev->mrpc_timeout);
+
+	/* Mark the hardware as unavailable and complete all completions */
+	mutex_lock(&stdev->mrpc_mutex);
+	stdev->alive = false;
+
+	/* Wake up and kill any users waiting on an MRPC request */
+	list_for_each_entry_safe(stuser, tmpuser, &stdev->mrpc_queue, list) {
+		complete_all(&stuser->comp);
+		list_del_init(&stuser->list);
+		stuser_put(stuser);
+	}
+
+	mutex_unlock(&stdev->mrpc_mutex);
+
+	/* Wake up any users waiting on event_wq */
+	wake_up_interruptible(&stdev->event_wq);
+}
+
+static struct switchtec_dev *stdev_create(struct pci_dev *pdev)
+{
+	struct switchtec_dev *stdev;
+	int minor;
+	struct device *dev;
+	struct cdev *cdev;
+	int rc;
+
+	stdev = kzalloc_node(sizeof(*stdev), GFP_KERNEL,
+			     dev_to_node(&pdev->dev));
+	if (!stdev)
+		return ERR_PTR(-ENOMEM);
+
+	stdev->alive = true;
+	stdev->pdev = pdev;
+	INIT_LIST_HEAD(&stdev->mrpc_queue);
+	mutex_init(&stdev->mrpc_mutex);
+	stdev->mrpc_busy = 0;
+	INIT_WORK(&stdev->mrpc_work, mrpc_event_work);
+	INIT_DELAYED_WORK(&stdev->mrpc_timeout, mrpc_timeout_work);
+	init_waitqueue_head(&stdev->event_wq);
+	atomic_set(&stdev->event_cnt, 0);
+
+	dev = &stdev->dev;
+	device_initialize(dev);
+	dev->class = switchtec_class;
+	dev->parent = &pdev->dev;
+	dev->groups = switchtec_device_groups;
+	dev->release = stdev_release;
+
+	minor = ida_simple_get(&switchtec_minor_ida, 0, 0,
+			       GFP_KERNEL);
+	if (minor < 0) {
+		rc = minor;
+		goto err_put;
+	}
+
+	dev->devt = MKDEV(MAJOR(switchtec_devt), minor);
+	dev_set_name(dev, "switchtec%d", minor);
+
+	cdev = &stdev->cdev;
+	cdev_init(cdev, &switchtec_fops);
+	cdev->owner = THIS_MODULE;
+	cdev->kobj.parent = &dev->kobj;
+
+	return stdev;
+
+err_put:
+	put_device(&stdev->dev);
+	return ERR_PTR(rc);
+}
+
+static int mask_event(struct switchtec_dev *stdev, int eid, int idx)
+{
+	size_t off = event_regs[eid].offset;
+	u32 __iomem *hdr_reg;
+	u32 hdr;
+
+	hdr_reg = event_regs[eid].map_reg(stdev, off, idx);
+	hdr = ioread32(hdr_reg);
+
+	if (!(hdr & SWITCHTEC_EVENT_OCCURRED && hdr & SWITCHTEC_EVENT_EN_IRQ))
+		return 0;
+
+	dev_dbg(&stdev->dev, "%s: %d %d %x\n", __func__, eid, idx, hdr);
+	hdr &= ~(SWITCHTEC_EVENT_EN_IRQ | SWITCHTEC_EVENT_OCCURRED);
+	iowrite32(hdr, hdr_reg);
+
+	return 1;
+}
+
+static int mask_all_events(struct switchtec_dev *stdev, int eid)
+{
+	int idx;
+	int count = 0;
+
+	if (event_regs[eid].map_reg == part_ev_reg) {
+		for (idx = 0; idx < stdev->partition_count; idx++)
+			count += mask_event(stdev, eid, idx);
+	} else if (event_regs[eid].map_reg == pff_ev_reg) {
+		for (idx = 0; idx < stdev->pff_csr_count; idx++) {
+			if (!stdev->pff_local[idx])
+				continue;
+			count += mask_event(stdev, eid, idx);
+		}
+	} else {
+		count += mask_event(stdev, eid, 0);
+	}
+
+	return count;
+}
+
+static irqreturn_t switchtec_event_isr(int irq, void *dev)
+{
+	struct switchtec_dev *stdev = dev;
+	u32 reg;
+	irqreturn_t ret = IRQ_NONE;
+	int eid, event_count = 0;
+
+	reg = ioread32(&stdev->mmio_part_cfg->mrpc_comp_hdr);
+	if (reg & SWITCHTEC_EVENT_OCCURRED) {
+		dev_dbg(&stdev->dev, "%s: mrpc comp\n", __func__);
+		ret = IRQ_HANDLED;
+		schedule_work(&stdev->mrpc_work);
+		iowrite32(reg, &stdev->mmio_part_cfg->mrpc_comp_hdr);
+	}
+
+	for (eid = 0; eid < SWITCHTEC_IOCTL_MAX_EVENTS; eid++)
+		event_count += mask_all_events(stdev, eid);
+
+	if (event_count) {
+		atomic_inc(&stdev->event_cnt);
+		wake_up_interruptible(&stdev->event_wq);
+		dev_dbg(&stdev->dev, "%s: %d events\n", __func__,
+			event_count);
+		return IRQ_HANDLED;
+	}
+
+	return ret;
+}
+
+static int switchtec_init_isr(struct switchtec_dev *stdev)
+{
+	int nvecs;
+	int event_irq;
+
+	nvecs = pci_alloc_irq_vectors(stdev->pdev, 1, 4,
+				      PCI_IRQ_MSIX | PCI_IRQ_MSI);
+	if (nvecs < 0)
+		return nvecs;
+
+	event_irq = ioread32(&stdev->mmio_part_cfg->vep_vector_number);
+	if (event_irq < 0 || event_irq >= nvecs)
+		return -EFAULT;
+
+	event_irq = pci_irq_vector(stdev->pdev, event_irq);
+	if (event_irq < 0)
+		return event_irq;
+
+	return devm_request_irq(&stdev->pdev->dev, event_irq,
+				switchtec_event_isr, 0,
+				KBUILD_MODNAME, stdev);
+}
+
+static void init_pff(struct switchtec_dev *stdev)
+{
+	int i;
+	u32 reg;
+	struct part_cfg_regs *pcfg = stdev->mmio_part_cfg;
+
+	for (i = 0; i < SWITCHTEC_MAX_PFF_CSR; i++) {
+		reg = ioread16(&stdev->mmio_pff_csr[i].vendor_id);
+		if (reg != MICROSEMI_VENDOR_ID)
+			break;
+	}
+
+	stdev->pff_csr_count = i;
+
+	reg = ioread32(&pcfg->usp_pff_inst_id);
+	if (reg < SWITCHTEC_MAX_PFF_CSR)
+		stdev->pff_local[reg] = 1;
+
+	reg = ioread32(&pcfg->vep_pff_inst_id);
+	if (reg < SWITCHTEC_MAX_PFF_CSR)
+		stdev->pff_local[reg] = 1;
+
+	for (i = 0; i < ARRAY_SIZE(pcfg->dsp_pff_inst_id); i++) {
+		reg = ioread32(&pcfg->dsp_pff_inst_id[i]);
+		if (reg < SWITCHTEC_MAX_PFF_CSR)
+			stdev->pff_local[reg] = 1;
+	}
+}
+
+static int switchtec_init_pci(struct switchtec_dev *stdev,
+			      struct pci_dev *pdev)
+{
+	int rc;
+
+	rc = pcim_enable_device(pdev);
+	if (rc)
+		return rc;
+
+	rc = pcim_iomap_regions(pdev, 0x1, KBUILD_MODNAME);
+	if (rc)
+		return rc;
+
+	pci_set_master(pdev);
+
+	stdev->mmio = pcim_iomap_table(pdev)[0];
+	stdev->mmio_mrpc = stdev->mmio + SWITCHTEC_GAS_MRPC_OFFSET;
+	stdev->mmio_sw_event = stdev->mmio + SWITCHTEC_GAS_SW_EVENT_OFFSET;
+	stdev->mmio_sys_info = stdev->mmio + SWITCHTEC_GAS_SYS_INFO_OFFSET;
+	stdev->mmio_flash_info = stdev->mmio + SWITCHTEC_GAS_FLASH_INFO_OFFSET;
+	stdev->mmio_ntb = stdev->mmio + SWITCHTEC_GAS_NTB_OFFSET;
+	stdev->partition = ioread8(&stdev->mmio_ntb->partition_id);
+	stdev->partition_count = ioread8(&stdev->mmio_ntb->partition_count);
+	stdev->mmio_part_cfg_all = stdev->mmio + SWITCHTEC_GAS_PART_CFG_OFFSET;
+	stdev->mmio_part_cfg = &stdev->mmio_part_cfg_all[stdev->partition];
+	stdev->mmio_pff_csr = stdev->mmio + SWITCHTEC_GAS_PFF_CSR_OFFSET;
+
+	init_pff(stdev);
+
+	pci_set_drvdata(pdev, stdev);
+
+	return 0;
+}
+
+static int switchtec_pci_probe(struct pci_dev *pdev,
+			       const struct pci_device_id *id)
+{
+	struct switchtec_dev *stdev;
+	int rc;
+
+	stdev = stdev_create(pdev);
+	if (IS_ERR(stdev))
+		return PTR_ERR(stdev);
+
+	rc = switchtec_init_pci(stdev, pdev);
+	if (rc)
+		goto err_put;
+
+	rc = switchtec_init_isr(stdev);
+	if (rc) {
+		dev_err(&stdev->dev, "failed to init isr.\n");
+		goto err_put;
+	}
+
+	iowrite32(SWITCHTEC_EVENT_CLEAR |
+		  SWITCHTEC_EVENT_EN_IRQ,
+		  &stdev->mmio_part_cfg->mrpc_comp_hdr);
+
+	rc = cdev_add(&stdev->cdev, stdev->dev.devt, 1);
+	if (rc)
+		goto err_put;
+
+	rc = device_add(&stdev->dev);
+	if (rc)
+		goto err_devadd;
+
+	dev_info(&stdev->dev, "Management device registered.\n");
+
+	return 0;
+
+err_devadd:
+	cdev_del(&stdev->cdev);
+	stdev_kill(stdev);
+err_put:
+	ida_simple_remove(&switchtec_minor_ida, MINOR(stdev->dev.devt));
+	put_device(&stdev->dev);
+	return rc;
+}
+
+static void switchtec_pci_remove(struct pci_dev *pdev)
+{
+	struct switchtec_dev *stdev = pci_get_drvdata(pdev);
+
+	pci_set_drvdata(pdev, NULL);
+
+	device_del(&stdev->dev);
+	cdev_del(&stdev->cdev);
+	ida_simple_remove(&switchtec_minor_ida, MINOR(stdev->dev.devt));
+	dev_info(&stdev->dev, "unregistered.\n");
+
+	stdev_kill(stdev);
+	put_device(&stdev->dev);
+}
+
+#define SWITCHTEC_PCI_DEVICE(device_id) \
+	{ \
+		.vendor     = MICROSEMI_VENDOR_ID, \
+		.device     = device_id, \
+		.subvendor  = PCI_ANY_ID, \
+		.subdevice  = PCI_ANY_ID, \
+		.class      = MICROSEMI_MGMT_CLASSCODE, \
+		.class_mask = 0xFFFFFFFF, \
+	}, \
+	{ \
+		.vendor     = MICROSEMI_VENDOR_ID, \
+		.device     = device_id, \
+		.subvendor  = PCI_ANY_ID, \
+		.subdevice  = PCI_ANY_ID, \
+		.class      = MICROSEMI_NTB_CLASSCODE, \
+		.class_mask = 0xFFFFFFFF, \
+	}
+
+static const struct pci_device_id switchtec_pci_tbl[] = {
+	SWITCHTEC_PCI_DEVICE(0x8531),  //PFX 24xG3
+	SWITCHTEC_PCI_DEVICE(0x8532),  //PFX 32xG3
+	SWITCHTEC_PCI_DEVICE(0x8533),  //PFX 48xG3
+	SWITCHTEC_PCI_DEVICE(0x8534),  //PFX 64xG3
+	SWITCHTEC_PCI_DEVICE(0x8535),  //PFX 80xG3
+	SWITCHTEC_PCI_DEVICE(0x8536),  //PFX 96xG3
+	SWITCHTEC_PCI_DEVICE(0x8543),  //PSX 48xG3
+	SWITCHTEC_PCI_DEVICE(0x8544),  //PSX 64xG3
+	SWITCHTEC_PCI_DEVICE(0x8545),  //PSX 80xG3
+	SWITCHTEC_PCI_DEVICE(0x8546),  //PSX 96xG3
+	{0}
+};
+MODULE_DEVICE_TABLE(pci, switchtec_pci_tbl);
+
+static struct pci_driver switchtec_pci_driver = {
+	.name		= KBUILD_MODNAME,
+	.id_table	= switchtec_pci_tbl,
+	.probe		= switchtec_pci_probe,
+	.remove		= switchtec_pci_remove,
+};
+
+static int __init switchtec_init(void)
+{
+	int rc;
+
+	rc = alloc_chrdev_region(&switchtec_devt, 0, max_devices,
+				 "switchtec");
+	if (rc)
+		return rc;
+
+	switchtec_class = class_create(THIS_MODULE, "switchtec");
+	if (IS_ERR(switchtec_class)) {
+		rc = PTR_ERR(switchtec_class);
+		goto err_create_class;
+	}
+
+	rc = pci_register_driver(&switchtec_pci_driver);
+	if (rc)
+		goto err_pci_register;
+
+	pr_info(KBUILD_MODNAME ": loaded.\n");
+
+	return 0;
+
+err_pci_register:
+	class_destroy(switchtec_class);
+
+err_create_class:
+	unregister_chrdev_region(switchtec_devt, max_devices);
+
+	return rc;
+}
+module_init(switchtec_init);
+
+static void __exit switchtec_exit(void)
+{
+	pci_unregister_driver(&switchtec_pci_driver);
+	class_destroy(switchtec_class);
+	unregister_chrdev_region(switchtec_devt, max_devices);
+	ida_destroy(&switchtec_minor_ida);
+
+	pr_info(KBUILD_MODNAME ": unloaded.\n");
+}
+module_exit(switchtec_exit);

include/linux/interrupt.h

···
 request_percpu_irq(unsigned int irq, irq_handler_t handler,
 		   const char *devname, void __percpu *percpu_dev_id);
 
-extern void free_irq(unsigned int, void *);
+extern const void *free_irq(unsigned int, void *);
 extern void free_percpu_irq(unsigned int, void __percpu *);
 
 struct device;

include/linux/io.h

···
 
 void *__devm_memremap_pages(struct device *dev, struct resource *res);
 
+#ifdef CONFIG_PCI
+/*
+ * The PCI specifications (Rev 3.0, 3.2.5 "Transaction Ordering and
+ * Posting") mandate non-posted configuration transactions. There is
+ * no ioremap API in the kernel that can guarantee non-posted write
+ * semantics across arches so provide a default implementation for
+ * mapping PCI config space that defaults to ioremap_nocache(); arches
+ * should override it if they have memory mapping implementations that
+ * guarantee non-posted writes semantics to make the memory mapping
+ * compliant with the PCI specification.
+ */
+#ifndef pci_remap_cfgspace
+#define pci_remap_cfgspace pci_remap_cfgspace
+static inline void __iomem *pci_remap_cfgspace(phys_addr_t offset,
+					       size_t size)
+{
+	return ioremap_nocache(offset, size);
+}
+#endif
+#endif
+
 /*
  * Some systems do not have legacy ISA devices.
  * /dev/port is not a valid interface on these systems.

include/linux/mfd/syscon/imx7-iomuxc-gpr.h

···
 
 #define IMX7D_GPR5_CSI_MUX_CONTROL_MIPI		(0x1 << 4)
 
+#define IMX7D_GPR12_PCIE_PHY_REFCLK_SEL		BIT(5)
+
+#define IMX7D_GPR22_PCIE_PHY_PLL_LOCKED		BIT(31)
+
 #endif /* __LINUX_IMX7_IOMUXC_GPR_H */

include/linux/mod_devicetable.h

···
 	kernel_ulong_t driver_data;	/* Data private to the driver */
 };
 
+/* pci_epf */
+
+#define PCI_EPF_NAME_SIZE	20
+#define PCI_EPF_MODULE_PREFIX	"pci_epf:"
+
+struct pci_epf_device_id {
+	char name[PCI_EPF_NAME_SIZE];
+	kernel_ulong_t driver_data;
+};
+
 /* spi */
 
 #define SPI_NAME_SIZE	32

include/linux/of_pci.h

···
 }
 #endif
 
-#if defined(CONFIG_OF) && defined(CONFIG_PCI_MSI)
-int of_pci_msi_chip_add(struct msi_controller *chip);
-void of_pci_msi_chip_remove(struct msi_controller *chip);
-struct msi_controller *of_pci_find_msi_chip_by_node(struct device_node *of_node);
-#else
-static inline int of_pci_msi_chip_add(struct msi_controller *chip) { return -EINVAL; }
-static inline void of_pci_msi_chip_remove(struct msi_controller *chip) { }
-static inline struct msi_controller *
-of_pci_find_msi_chip_by_node(struct device_node *of_node) { return NULL; }
-#endif
-
 #endif

include/linux/pci-ecam.h

···
 #ifndef DRIVERS_PCI_ECAM_H
 #define DRIVERS_PCI_ECAM_H
 
+#include <linux/pci.h>
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 
···
 extern struct pci_ecam_ops xgene_v2_pcie_ecam_ops; /* APM X-Gene PCIe v2.x */
 #endif
 
-#ifdef CONFIG_PCI_HOST_GENERIC
+#ifdef CONFIG_PCI_HOST_COMMON
 /* for DT-based PCI controllers that support ECAM */
 int pci_host_common_probe(struct platform_device *pdev,
 			  struct pci_ecam_ops *ops);

include/linux/pci-ep-cfs.h

···
+/**
+ * PCI Endpoint ConfigFS header file
+ *
+ * Copyright (C) 2017 Texas Instruments
+ * Author: Kishon Vijay Abraham I <[e-mail]>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 of
+ * the License as published by the Free Software Foundation.
+ */
+
+#ifndef __LINUX_PCI_EP_CFS_H
+#define __LINUX_PCI_EP_CFS_H
+
+#include <linux/configfs.h>
+
+#ifdef CONFIG_PCI_ENDPOINT_CONFIGFS
+struct config_group *pci_ep_cfs_add_epc_group(const char *name);
+void pci_ep_cfs_remove_epc_group(struct config_group *group);
+struct config_group *pci_ep_cfs_add_epf_group(const char *name);
+void pci_ep_cfs_remove_epf_group(struct config_group *group);
+#else
+static inline struct config_group *pci_ep_cfs_add_epc_group(const char *name)
+{
+	return 0;
+}
+
+static inline void pci_ep_cfs_remove_epc_group(struct config_group *group)
+{
+}
+
+static inline struct config_group *pci_ep_cfs_add_epf_group(const char *name)
+{
+	return 0;
+}
+
+static inline void pci_ep_cfs_remove_epf_group(struct config_group *group)
+{
+}
+#endif
+#endif /* __LINUX_PCI_EP_CFS_H */

include/linux/pci-epc.h

···
+/**
+ * PCI Endpoint *Controller* (EPC) header file
+ *
+ * Copyright (C) 2017 Texas Instruments
+ * Author: Kishon Vijay Abraham I <[e-mail]>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 of
+ * the License as published by the Free Software Foundation.
+ */
+
+#ifndef __LINUX_PCI_EPC_H
+#define __LINUX_PCI_EPC_H
+
+#include <linux/pci-epf.h>
+
+struct pci_epc;
+
+enum pci_epc_irq_type {
+	PCI_EPC_IRQ_UNKNOWN,
+	PCI_EPC_IRQ_LEGACY,
+	PCI_EPC_IRQ_MSI,
+};
+
+/**
+ * struct pci_epc_ops - set of function pointers for performing EPC operations
+ * @write_header: ops to populate configuration space header
+ * @set_bar: ops to configure the BAR
+ * @clear_bar: ops to reset the BAR
+ * @map_addr: ops to map CPU address to PCI address
+ * @unmap_addr: ops to unmap CPU address and PCI address
+ * @set_msi: ops to set the requested number of MSI interrupts in the MSI
+ *	     capability register
+ * @get_msi: ops to get the number of MSI interrupts allocated by the RC from
+ *	     the MSI capability register
+ * @raise_irq: ops to raise a legacy or MSI interrupt
+ * @start: ops to start the PCI link
+ * @stop: ops to stop the PCI link
+ * @owner: the module owner containing the ops
+ */
+struct pci_epc_ops {
+	int	(*write_header)(struct pci_epc *pci_epc,
+				struct pci_epf_header *hdr);
+	int	(*set_bar)(struct pci_epc *epc, enum pci_barno bar,
+			   dma_addr_t bar_phys, size_t size, int flags);
+	void	(*clear_bar)(struct pci_epc *epc, enum pci_barno bar);
+	int	(*map_addr)(struct pci_epc *epc, phys_addr_t addr,
+			    u64 pci_addr, size_t size);
+	void	(*unmap_addr)(struct pci_epc *epc, phys_addr_t addr);
+	int	(*set_msi)(struct pci_epc *epc, u8 interrupts);
+	int	(*get_msi)(struct pci_epc *epc);
+	int	(*raise_irq)(struct pci_epc *pci_epc,
+			     enum pci_epc_irq_type type, u8 interrupt_num);
+	int	(*start)(struct pci_epc *epc);
+	void	(*stop)(struct pci_epc *epc);
+	struct module *owner;
+};
+
+/**
+ * struct pci_epc_mem - address space of the endpoint controller
+ * @phys_base: physical base address of the PCI address space
+ * @size: the size of the PCI address space
+ * @bitmap: bitmap to manage the PCI address space
+ * @pages: number of bits representing the address region
+ */
+struct pci_epc_mem {
+	phys_addr_t	phys_base;
+	size_t		size;
+	unsigned long	*bitmap;
+	int		pages;
+};
+
+/**
+ * struct pci_epc - represents the PCI EPC device
+ * @dev: PCI EPC device
+ * @pci_epf: list of endpoint functions present in this EPC device
+ * @ops: function pointers for performing endpoint operations
+ * @mem: address space of the endpoint controller
+ * @max_functions: max number of functions that can be configured in this EPC
+ * @group: configfs group representing the PCI EPC device
+ * @lock: spinlock to protect pci_epc ops
+ */
+struct pci_epc {
+	struct device			dev;
+	struct list_head		pci_epf;
+	const struct pci_epc_ops	*ops;
+	struct pci_epc_mem		*mem;
+	u8				max_functions;
+	struct config_group		*group;
+	/* spinlock to protect against concurrent access of EP controller */
+	spinlock_t			lock;
+};
+
+#define to_pci_epc(device) container_of((device), struct pci_epc, dev)
+
+#define pci_epc_create(dev, ops)    \
+		__pci_epc_create((dev), (ops), THIS_MODULE)
+#define devm_pci_epc_create(dev, ops)    \
+		__devm_pci_epc_create((dev), (ops), THIS_MODULE)
+
+static inline void epc_set_drvdata(struct pci_epc *epc, void *data)
+{
+	dev_set_drvdata(&epc->dev, data);
+}
+
+static inline void *epc_get_drvdata(struct pci_epc *epc)
+{
+	return dev_get_drvdata(&epc->dev);
+}
+
+struct pci_epc *
+__devm_pci_epc_create(struct device *dev, const struct pci_epc_ops *ops,
+		      struct module *owner);
+struct pci_epc *
+__pci_epc_create(struct device *dev, const struct pci_epc_ops *ops,
+		 struct module *owner);
+void devm_pci_epc_destroy(struct device *dev, struct pci_epc *epc);
+void pci_epc_destroy(struct pci_epc *epc);
+int pci_epc_add_epf(struct pci_epc *epc, struct pci_epf *epf);
+void pci_epc_linkup(struct pci_epc *epc);
+void pci_epc_remove_epf(struct pci_epc *epc, struct pci_epf *epf);
+int pci_epc_write_header(struct pci_epc *epc, struct pci_epf_header *hdr);
+int pci_epc_set_bar(struct pci_epc *epc, enum pci_barno bar,
+		    dma_addr_t bar_phys, size_t size, int flags);
+void pci_epc_clear_bar(struct pci_epc *epc, int bar);
+int pci_epc_map_addr(struct pci_epc *epc, phys_addr_t phys_addr,
+		     u64 pci_addr, size_t size);
+void pci_epc_unmap_addr(struct pci_epc *epc, phys_addr_t phys_addr);
+int pci_epc_set_msi(struct pci_epc *epc, u8 interrupts);
+int pci_epc_get_msi(struct pci_epc *epc);
+int pci_epc_raise_irq(struct pci_epc *epc, enum pci_epc_irq_type type,
+		      u8 interrupt_num);
+int pci_epc_start(struct pci_epc *epc);
+void pci_epc_stop(struct pci_epc *epc);
+struct pci_epc *pci_epc_get(const char *epc_name);
+void pci_epc_put(struct pci_epc *epc);
+
+int pci_epc_mem_init(struct pci_epc *epc, phys_addr_t phys_addr, size_t size);
+void pci_epc_mem_exit(struct pci_epc *epc);
+void __iomem *pci_epc_mem_alloc_addr(struct pci_epc *epc,
+				     phys_addr_t *phys_addr, size_t size);
+void pci_epc_mem_free_addr(struct pci_epc *epc, phys_addr_t phys_addr,
+			   void __iomem *virt_addr, size_t size);
+#endif /* __LINUX_PCI_EPC_H */

include/linux/pci-epf.h

···
+/**
+ * PCI Endpoint *Function* (EPF) header file
+ *
+ * Copyright (C) 2017 Texas Instruments
+ * Author: Kishon Vijay Abraham I <[e-mail]>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 of
+ * the License as published by the Free Software Foundation.
+ */
+
+#ifndef __LINUX_PCI_EPF_H
+#define __LINUX_PCI_EPF_H
+
+#include <linux/device.h>
+#include <linux/mod_devicetable.h>
+
+struct pci_epf;
+
+enum pci_interrupt_pin {
+	PCI_INTERRUPT_UNKNOWN,
+	PCI_INTERRUPT_INTA,
+	PCI_INTERRUPT_INTB,
+	PCI_INTERRUPT_INTC,
+	PCI_INTERRUPT_INTD,
+};
+
+enum pci_barno {
+	BAR_0,
+	BAR_1,
+	BAR_2,
+	BAR_3,
+	BAR_4,
+	BAR_5,
+};
+
+/**
+ * struct pci_epf_header - represents standard configuration header
+ * @vendorid: identifies device manufacturer
+ * @deviceid: identifies a particular device
+ * @revid: specifies a device-specific revision identifier
+ * @progif_code: identifies a specific register-level programming interface
+ * @subclass_code: identifies more specifically the function of the device
+ * @baseclass_code: broadly classifies the type of function the device performs
+ * @cache_line_size: specifies the system cacheline size in units of DWORDs
+ * @subsys_vendor_id: vendor of the add-in card or subsystem
+ * @subsys_id: id specific to vendor
+ * @interrupt_pin: interrupt pin the device (or device function) uses
+ */
+struct pci_epf_header {
+	u16	vendorid;
+	u16	deviceid;
+	u8	revid;
+	u8	progif_code;
+	u8	subclass_code;
+	u8	baseclass_code;
+	u8	cache_line_size;
+	u16	subsys_vendor_id;
+	u16	subsys_id;
+	enum pci_interrupt_pin interrupt_pin;
+};
+
+/**
+ * struct pci_epf_ops - set of function pointers for performing EPF operations
+ * @bind: ops to perform when a EPC device has been bound to EPF device
+ * @unbind: ops to perform when a binding has been lost between a EPC device
+ *	    and EPF device
+ * @linkup: ops to perform when the EPC device has established a connection with
+ *	    a host system
+ */
+struct pci_epf_ops {
+	int	(*bind)(struct pci_epf *epf);
+	void	(*unbind)(struct pci_epf *epf);
+	void	(*linkup)(struct pci_epf *epf);
+};
+
+/**
+ * struct pci_epf_driver - represents the PCI EPF driver
+ * @probe: ops to perform when a new EPF device has been bound to the EPF driver
+ * @remove: ops to perform when the binding between the EPF device and EPF
+ *	    driver is broken
+ * @driver: PCI EPF driver
+ * @ops: set of function pointers for performing EPF operations
+ * @owner: the owner of the module that registers the PCI EPF driver
+ * @group: configfs group corresponding to the PCI EPF driver
+ * @id_table: identifies EPF devices for probing
+ */
+struct pci_epf_driver {
+	int	(*probe)(struct pci_epf *epf);
+	int	(*remove)(struct pci_epf *epf);
+
+	struct device_driver	driver;
+	struct pci_epf_ops	*ops;
+	struct module		*owner;
+	struct config_group	*group;
+	const struct pci_epf_device_id	*id_table;
+};
+
+#define to_pci_epf_driver(drv) (container_of((drv), struct pci_epf_driver, \
+				driver))
+
+/**
+ * struct pci_epf_bar - represents the BAR of EPF device
+ * @phys_addr: physical address that should be mapped to the BAR
+ * @size: the size of the address space present in BAR
+ */
+struct pci_epf_bar {
+	dma_addr_t	phys_addr;
+	size_t		size;
+};
+
+/**
+ * struct pci_epf - represents the PCI EPF device
+ * @dev: the PCI EPF device
+ * @name: the name of the PCI EPF device
+ * @header: represents standard configuration header
+ * @bar: represents the BAR of EPF device
+ * @msi_interrupts: number of MSI interrupts required by this function
+ * @func_no: unique function number within this endpoint device
+ * @epc: the EPC device to which this EPF device is bound
+ * @driver: the EPF driver to which this EPF device is bound
+ * @list: to add pci_epf as a list of PCI endpoint functions to pci_epc
+ */
+struct pci_epf {
+	struct device		dev;
+	const char		*name;
+	struct pci_epf_header	*header;
+	struct pci_epf_bar	bar[6];
+	u8			msi_interrupts;
+	u8			func_no;
+
+	struct pci_epc		*epc;
+	struct pci_epf_driver	*driver;
+	struct list_head	list;
+};
+
+#define to_pci_epf(epf_dev) container_of((epf_dev), struct pci_epf, dev)
+
+#define pci_epf_register_driver(driver)    \
+		__pci_epf_register_driver((driver), THIS_MODULE)
+
+static inline void epf_set_drvdata(struct pci_epf *epf, void *data)
+{
+	dev_set_drvdata(&epf->dev, data);
+}
+
+static inline void *epf_get_drvdata(struct pci_epf *epf)
+{
+	return dev_get_drvdata(&epf->dev);
+}
+
+struct pci_epf *pci_epf_create(const char *name);
+void pci_epf_destroy(struct pci_epf *epf);
+int __pci_epf_register_driver(struct pci_epf_driver *driver,
+			      struct module *owner);
+void pci_epf_unregister_driver(struct pci_epf_driver *driver);
+void *pci_epf_alloc_space(struct pci_epf *epf, size_t size, enum pci_barno bar);
+void pci_epf_free_space(struct pci_epf *epf, void *addr, enum pci_barno bar);
+int pci_epf_bind(struct pci_epf *epf);
+void pci_epf_unbind(struct pci_epf *epf);
+void pci_epf_linkup(struct pci_epf *epf);
+#endif /* __LINUX_PCI_EPF_H */

include/linux/pci.h

···
 #include <linux/kobject.h>
 #include <linux/atomic.h>
 #include <linux/device.h>
+#include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/resource_ext.h>
 #include <uapi/linux/pci.h>
···
 	PCI_DEV_FLAGS_NO_PM_RESET = (__force pci_dev_flags_t) (1 << 7),
 	/* Get VPD from function 0 VPD */
 	PCI_DEV_FLAGS_VPD_REF_F0 = (__force pci_dev_flags_t) (1 << 8),
+	/* a non-root bridge where translation occurs, stop alias search here */
+	PCI_DEV_FLAGS_BRIDGE_XLATE_ROOT = (__force pci_dev_flags_t) (1 << 9),
+	/* Do not use FLR even if device advertises PCI_AF_CAP */
+	PCI_DEV_FLAGS_NO_FLR_RESET = (__force pci_dev_flags_t) (1 << 10),
 };
 
 enum pci_irq_reroute_variant {
···
 	phys_addr_t rom; /* Physical address of ROM if it's not from the BAR */
 	size_t romlen; /* Length of ROM if it's not from the BAR */
 	char *driver_override; /* Driver name to force a match */
+
+	unsigned long priv_flags; /* Private flags for the pci driver */
 };
 
 static inline struct pci_dev *pci_physfn(struct pci_dev *dev)
···
 
 struct pci_ops *pci_bus_set_ops(struct pci_bus *bus, struct pci_ops *ops);
 
-static inline int pci_read_config_byte(const struct pci_dev *dev, int where, u8 *val)
-{
-	return pci_bus_read_config_byte(dev->bus, dev->devfn, where, val);
-}
-static inline int pci_read_config_word(const struct pci_dev *dev, int where, u16 *val)
-{
-	return pci_bus_read_config_word(dev->bus, dev->devfn, where, val);
-}
-static inline int pci_read_config_dword(const struct pci_dev *dev, int where,
-					u32 *val)
-{
-	return pci_bus_read_config_dword(dev->bus, dev->devfn, where, val);
-}
-static inline int pci_write_config_byte(const struct pci_dev *dev, int where, u8 val)
-{
-	return pci_bus_write_config_byte(dev->bus, dev->devfn, where, val);
-}
-static inline int pci_write_config_word(const struct pci_dev *dev, int where, u16 val)
-{
-	return pci_bus_write_config_word(dev->bus, dev->devfn, where, val);
-}
-static inline int pci_write_config_dword(const struct pci_dev *dev, int where,
-					 u32 val)
-{
-	return pci_bus_write_config_dword(dev->bus, dev->devfn, where, val);
-}
+int pci_read_config_byte(const struct pci_dev *dev, int where, u8 *val);
+int pci_read_config_word(const struct pci_dev *dev, int where, u16 *val);
+int pci_read_config_dword(const struct pci_dev *dev, int where, u32 *val);
+int pci_write_config_byte(const struct pci_dev *dev, int where, u8 val);
+int pci_write_config_word(const struct pci_dev *dev, int where, u16 val);
+int pci_write_config_dword(const struct pci_dev *dev, int where, u32 val);
 
 int pcie_capability_read_word(struct pci_dev *dev, int pos, u16 *val);
 int pcie_capability_read_dword(struct pci_dev *dev, int pos, u32 *val);
···
 int pcie_set_mps(struct pci_dev *dev, int mps);
 int pcie_get_minimum_link(struct pci_dev *dev, enum pci_bus_speed *speed,
 			  enum pcie_link_width *width);
+void pcie_flr(struct pci_dev *dev);
 int __pci_reset_function(struct pci_dev *dev);
 int __pci_reset_function_locked(struct pci_dev *dev);
 int pci_reset_function(struct pci_dev *dev);
···
 int pci_select_bars(struct pci_dev *dev, unsigned long flags);
 bool pci_device_is_present(struct pci_dev *pdev);
 void pci_ignore_hotplug(struct pci_dev *dev);
+
+int __printf(6, 7) pci_request_irq(struct pci_dev *dev, unsigned int nr,
+		irq_handler_t handler, irq_handler_t thread_fn, void *dev_id,
+		const char *fmt, ...);
+void pci_free_irq(struct pci_dev *dev, unsigned int nr, void *dev_id);
 
 /* ROM control related routines */
 int pci_enable_rom(struct pci_dev *pdev);
···
 phys_addr_t pci_pio_to_address(unsigned long pio);
 int pci_remap_iospace(const struct resource *res, phys_addr_t phys_addr);
 void pci_unmap_iospace(struct resource *res);
+void __iomem *devm_pci_remap_cfgspace(struct device *dev,
+				      resource_size_t offset,
+				      resource_size_t size);
+void __iomem *devm_pci_remap_cfg_resource(struct device *dev,
+					  struct resource *res);
 
 static inline pci_bus_addr_t pci_bus_address(struct pci_dev *pdev, int bar)
 {
···
 
 #ifdef CONFIG_PCI_MSI
 int pci_msi_vec_count(struct pci_dev *dev);
-void pci_msi_shutdown(struct pci_dev *dev);
 void pci_disable_msi(struct pci_dev *dev);
 int pci_msix_vec_count(struct pci_dev *dev);
-void pci_msix_shutdown(struct pci_dev *dev);
 void pci_disable_msix(struct pci_dev *dev);
 void pci_restore_msi_state(struct pci_dev *dev);
 int pci_msi_enabled(void);
···
 
 #else
 static inline int pci_msi_vec_count(struct pci_dev *dev) { return -ENOSYS; }
-static inline void pci_msi_shutdown(struct pci_dev *dev) { }
 static inline void pci_disable_msi(struct pci_dev *dev) { }
 static inline int pci_msix_vec_count(struct pci_dev *dev) { return -ENOSYS; }
-static inline void pci_msix_shutdown(struct pci_dev *dev) { }
 static inline void pci_disable_msix(struct pci_dev *dev) { }
 static inline void pci_restore_msi_state(struct pci_dev *dev) { }
 static inline int pci_msi_enabled(void) { return 0; }
···
 /* Include architecture-dependent settings and functions */
 
 #include <asm/pci.h>
+
+/* These two functions provide almost identical functionality. Depennding
+ * on the architecture, one will be implemented as a wrapper around the
+ * other (in drivers/pci/mmap.c).
+ *
+ * pci_mmap_resource_range() maps a specific BAR, and vm->vm_pgoff
+ * is expected to be an offset within that region.
+ *
+ * pci_mmap_page_range() is the legacy architecture-specific interface,
+ * which accepts a "user visible" resource address converted by
+ * pci_resource_to_user(), as used in the legacy mmap() interface in
+ * /proc/bus/pci/.
+ */
+int pci_mmap_resource_range(struct pci_dev *dev, int bar,
+			    struct vm_area_struct *vma,
+			    enum pci_mmap_state mmap_state, int write_combine);
+int pci_mmap_page_range(struct pci_dev *pdev, int bar,
+			struct vm_area_struct *vma,
+			enum pci_mmap_state mmap_state, int write_combine);
+
+#ifndef arch_can_pci_mmap_wc
+#define arch_can_pci_mmap_wc()		0
+#endif
+
+#ifndef arch_can_pci_mmap_io
+#define arch_can_pci_mmap_io()		0
+#define pci_iobar_pfn(pdev, bar, vma) (-EINVAL)
+#else
+int pci_iobar_pfn(struct pci_dev *pdev, int bar, struct vm_area_struct *vma);
+#endif
 
 #ifndef pci_root_bus_fwnode
 #define pci_root_bus_fwnode(bus)	NULL

include/linux/pci_ids.h

···
 #define PCI_DEVICE_ID_TI_X620		0xac8d
 #define PCI_DEVICE_ID_TI_X420		0xac8e
 #define PCI_DEVICE_ID_TI_XX20_FM	0xac8f
+#define PCI_DEVICE_ID_TI_DRA74x		0xb500
+#define PCI_DEVICE_ID_TI_DRA72x		0xb501
 
 #define PCI_VENDOR_ID_SONY		0x104d
 

include/uapi/linux/Kbuild

···
 header-y += patchkey.h
 header-y += pci.h
 header-y += pci_regs.h
+header-y += pcitest.h
 header-y += perf_event.h
 header-y += personality.h
 header-y += pfkeyv2.h

include/uapi/linux/pci_regs.h

···
 #define PCI_SUBSYSTEM_ID	0x2e
 #define PCI_ROM_ADDRESS		0x30	/* Bits 31..11 are address, 10..1 reserved */
 #define  PCI_ROM_ADDRESS_ENABLE	0x01
-#define PCI_ROM_ADDRESS_MASK	(~0x7ffUL)
+#define PCI_ROM_ADDRESS_MASK	(~0x7ffU)
 
 #define PCI_CAPABILITY_LIST	0x34	/* Offset of first capability list entry */
 

include/uapi/linux/pcitest.h

···
+/**
+ * pcitest.h - PCI test uapi defines
+ *
+ * Copyright (C) 2017 Texas Instruments
+ * Author: Kishon Vijay Abraham I <[e-mail]>
+ *
+ */
+
+#ifndef __UAPI_LINUX_PCITEST_H
+#define __UAPI_LINUX_PCITEST_H
+
+#define PCITEST_BAR		_IO('P', 0x1)
+#define PCITEST_LEGACY_IRQ	_IO('P', 0x2)
+#define PCITEST_MSI		_IOW('P', 0x3, int)
+#define PCITEST_WRITE		_IOW('P', 0x4, unsigned long)
+#define PCITEST_READ		_IOW('P', 0x5, unsigned long)
+#define PCITEST_COPY		_IOW('P', 0x6, unsigned long)
+
+#endif /* __UAPI_LINUX_PCITEST_H */

include/uapi/linux/switchtec_ioctl.h

···
+/*
+ * Microsemi Switchtec PCIe Driver
+ * Copyright (c) 2017, Microsemi Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ */
+
+#ifndef _UAPI_LINUX_SWITCHTEC_IOCTL_H
+#define _UAPI_LINUX_SWITCHTEC_IOCTL_H
+
+#include <linux/types.h>
+
+#define SWITCHTEC_IOCTL_PART_CFG0	0
+#define SWITCHTEC_IOCTL_PART_CFG1	1
+#define SWITCHTEC_IOCTL_PART_IMG0	2
+#define SWITCHTEC_IOCTL_PART_IMG1	3
+#define SWITCHTEC_IOCTL_PART_NVLOG	4
+#define SWITCHTEC_IOCTL_PART_VENDOR0	5
+#define SWITCHTEC_IOCTL_PART_VENDOR1	6
+#define SWITCHTEC_IOCTL_PART_VENDOR2	7
+#define SWITCHTEC_IOCTL_PART_VENDOR3	8
+#define SWITCHTEC_IOCTL_PART_VENDOR4	9
+#define SWITCHTEC_IOCTL_PART_VENDOR5	10
+#define SWITCHTEC_IOCTL_PART_VENDOR6	11
+#define SWITCHTEC_IOCTL_PART_VENDOR7	12
+#define SWITCHTEC_IOCTL_NUM_PARTITIONS	13
+
+struct switchtec_ioctl_flash_info {
+	__u64 flash_length;
+	__u32 num_partitions;
+	__u32 padding;
+};
+
+struct switchtec_ioctl_flash_part_info {
+	__u32 flash_partition;
+	__u32 address;
+	__u32 length;
+	__u32 active;
+};
+
+struct switchtec_ioctl_event_summary {
+	__u64 global;
+	__u64 part_bitmap;
+	__u32 local_part;
+	__u32 padding;
+	__u32 part[48];
+	__u32 pff[48];
+};
+
+#define SWITCHTEC_IOCTL_EVENT_STACK_ERROR		0
+#define SWITCHTEC_IOCTL_EVENT_PPU_ERROR			1
+#define SWITCHTEC_IOCTL_EVENT_ISP_ERROR			2
+#define SWITCHTEC_IOCTL_EVENT_SYS_RESET			3
+#define SWITCHTEC_IOCTL_EVENT_FW_EXC			4
+#define SWITCHTEC_IOCTL_EVENT_FW_NMI			5
+#define SWITCHTEC_IOCTL_EVENT_FW_NON_FATAL		6
+#define SWITCHTEC_IOCTL_EVENT_FW_FATAL			7
+#define SWITCHTEC_IOCTL_EVENT_TWI_MRPC_COMP		8
+#define SWITCHTEC_IOCTL_EVENT_TWI_MRPC_COMP_ASYNC	9
+#define SWITCHTEC_IOCTL_EVENT_CLI_MRPC_COMP		10
+#define SWITCHTEC_IOCTL_EVENT_CLI_MRPC_COMP_ASYNC	11
+#define SWITCHTEC_IOCTL_EVENT_GPIO_INT			12
+#define SWITCHTEC_IOCTL_EVENT_PART_RESET		13
+#define SWITCHTEC_IOCTL_EVENT_MRPC_COMP			14
+#define SWITCHTEC_IOCTL_EVENT_MRPC_COMP_ASYNC		15
+#define SWITCHTEC_IOCTL_EVENT_DYN_PART_BIND_COMP	16
+#define SWITCHTEC_IOCTL_EVENT_AER_IN_P2P		17
+#define SWITCHTEC_IOCTL_EVENT_AER_IN_VEP		18
+#define SWITCHTEC_IOCTL_EVENT_DPC			19
+#define SWITCHTEC_IOCTL_EVENT_CTS			20
+#define SWITCHTEC_IOCTL_EVENT_HOTPLUG			21
+#define SWITCHTEC_IOCTL_EVENT_IER			22
+#define SWITCHTEC_IOCTL_EVENT_THRESH			23
+#define SWITCHTEC_IOCTL_EVENT_POWER_MGMT		24
+#define SWITCHTEC_IOCTL_EVENT_TLP_THROTTLING		25
+#define SWITCHTEC_IOCTL_EVENT_FORCE_SPEED		26
+#define SWITCHTEC_IOCTL_EVENT_CREDIT_TIMEOUT		27
+#define SWITCHTEC_IOCTL_EVENT_LINK_STATE		28
+#define SWITCHTEC_IOCTL_MAX_EVENTS			29
+
+#define SWITCHTEC_IOCTL_EVENT_LOCAL_PART_IDX -1
+#define SWITCHTEC_IOCTL_EVENT_IDX_ALL -2
+
+#define SWITCHTEC_IOCTL_EVENT_FLAG_CLEAR     (1 << 0)
+#define SWITCHTEC_IOCTL_EVENT_FLAG_EN_POLL   (1 << 1)
+#define SWITCHTEC_IOCTL_EVENT_FLAG_EN_LOG    (1 << 2)
+#define SWITCHTEC_IOCTL_EVENT_FLAG_EN_CLI    (1 << 3)
+#define SWITCHTEC_IOCTL_EVENT_FLAG_EN_FATAL  (1 << 4)
+#define SWITCHTEC_IOCTL_EVENT_FLAG_DIS_POLL  (1 << 5)
+#define SWITCHTEC_IOCTL_EVENT_FLAG_DIS_LOG   (1 << 6)
+#define SWITCHTEC_IOCTL_EVENT_FLAG_DIS_CLI   (1 << 7)
+#define SWITCHTEC_IOCTL_EVENT_FLAG_DIS_FATAL (1 << 8)
+#define SWITCHTEC_IOCTL_EVENT_FLAG_UNUSED    (~0x1ff)
+
+struct switchtec_ioctl_event_ctl {
+	__u32 event_id;
+	__s32 index;
+	__u32 flags;
+	__u32 occurred;
+	__u32 count;
+	__u32 data[5];
+};
+
+#define SWITCHTEC_IOCTL_PFF_VEP 100
+struct switchtec_ioctl_pff_port {
+	__u32 pff;
+	__u32 partition;
+	__u32 port;
+};
+
+#define SWITCHTEC_IOCTL_FLASH_INFO \
+	_IOR('W', 0x40, struct switchtec_ioctl_flash_info)
+#define SWITCHTEC_IOCTL_FLASH_PART_INFO \
+	_IOWR('W', 0x41, struct switchtec_ioctl_flash_part_info)
+#define SWITCHTEC_IOCTL_EVENT_SUMMARY \
+	_IOR('W', 0x42, struct switchtec_ioctl_event_summary)
+#define SWITCHTEC_IOCTL_EVENT_CTL \
+	_IOWR('W', 0x43, struct switchtec_ioctl_event_ctl)
+#define SWITCHTEC_IOCTL_PFF_TO_PORT \
+	_IOWR('W', 0x44, struct switchtec_ioctl_pff_port)
+#define SWITCHTEC_IOCTL_PORT_TO_PFF \
+	_IOWR('W', 0x45, struct switchtec_ioctl_pff_port)
+
+#endif

kernel/irq/manage.c

···
 	struct irq_desc *desc = irq_to_desc(irq);
 
 	if (desc && !WARN_ON(irq_settings_is_per_cpu_devid(desc)))
-	    __free_irq(irq, act->dev_id);
+		__free_irq(irq, act->dev_id);
 }
 EXPORT_SYMBOL_GPL(remove_irq);
 
···
  *	have completed.
  *
  *	This function must not be called from interrupt context.
+ *
+ *	Returns the devname argument passed to request_irq.
  */
-void free_irq(unsigned int irq, void *dev_id)
+const void *free_irq(unsigned int irq, void *dev_id)
 {
 	struct irq_desc *desc = irq_to_desc(irq);
+	struct irqaction *action;
+	const char *devname;
 
 	if (!desc || WARN_ON(irq_settings_is_per_cpu_devid(desc)))
-		return;
+		return NULL;
 
 #ifdef CONFIG_SMP
 	if (WARN_ON(desc->affinity_notify))
 		desc->affinity_notify = NULL;
 #endif
 
-	kfree(__free_irq(irq, dev_id));
+	action = __free_irq(irq, dev_id);
+	devname = action->name;
+	kfree(action);
+	return devname;
 }
 EXPORT_SYMBOL(free_irq);
 

lib/devres.c

···
 /**
  * devm_ioremap - Managed ioremap()
  * @dev: Generic device to remap IO address for
- * @offset: BUS offset to map
+ * @offset: Resource address to map
  * @size: Size of map
  *
  * Managed ioremap().  Map is automatically unmapped on driver detach.
···
 /**
  * devm_ioremap_nocache - Managed ioremap_nocache()
  * @dev: Generic device to remap IO address for
- * @offset: BUS offset to map
+ * @offset: Resource address to map
  * @size: Size of map
  *
  * Managed ioremap_nocache().  Map is automatically unmapped on driver
···
 /**
  * devm_ioremap_wc - Managed ioremap_wc()
  * @dev: Generic device to remap IO address for
- * @offset: BUS offset to map
+ * @offset: Resource address to map
  * @size: Size of map
  *
  * Managed ioremap_wc().  Map is automatically unmapped on driver detach.

tools/pci/pcitest.c

···
+/**
+ * Userspace PCI Endpoint Test Module
+ *
+ * Copyright (C) 2017 Texas Instruments
+ * Author: Kishon Vijay Abraham I <[e-mail]>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 of
+ * the License as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <errno.h>
+#include <fcntl.h>
+#include <stdbool.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <sys/ioctl.h>
+#include <time.h>
+#include <unistd.h>
+
+#include <linux/pcitest.h>
+
+#define BILLION 1E9
+
+static char *result[] = { "NOT OKAY", "OKAY" };
+
+struct pci_test {
+	char		*device;
+	char		barnum;
+	bool		legacyirq;
+	unsigned int	msinum;
+	bool		read;
+	bool		write;
+	bool		copy;
+	unsigned long	size;
+};
+
+static int run_test(struct pci_test *test)
+{
+	long ret;
+	int fd;
+	struct timespec start, end;
+	double time;
+
+	fd = open(test->device, O_RDWR);
+	if (fd < 0) {
+		perror("can't open PCI Endpoint Test device");
+		return fd;
+	}
+
+	if (test->barnum >= 0 && test->barnum <= 5) {
+		ret = ioctl(fd, PCITEST_BAR, test->barnum);
+		fprintf(stdout, "BAR%d:\t\t", test->barnum);
+		if (ret < 0)
+			fprintf(stdout, "TEST FAILED\n");
+		else
+			fprintf(stdout, "%s\n", result[ret]);
+	}
+
+	if (test->legacyirq) {
+		ret = ioctl(fd, PCITEST_LEGACY_IRQ, 0);
+		fprintf(stdout, "LEGACY IRQ:\t");
+		if (ret < 0)
+			fprintf(stdout, "TEST FAILED\n");
+		else
+			fprintf(stdout, "%s\n", result[ret]);
+	}
+
+	if (test->msinum > 0 && test->msinum <= 32) {
+		ret = ioctl(fd, PCITEST_MSI, test->msinum);
+		fprintf(stdout, "MSI%d:\t\t", test->msinum);
+		if (ret < 0)
+			fprintf(stdout, "TEST FAILED\n");
+		else
+			fprintf(stdout, "%s\n", result[ret]);
+	}
+
+	if (test->write) {
+		ret = ioctl(fd, PCITEST_WRITE, test->size);
+		fprintf(stdout, "WRITE (%7ld bytes):\t\t", test->size);
+		if (ret < 0)
+			fprintf(stdout, "TEST FAILED\n");
+		else
+			fprintf(stdout, "%s\n", result[ret]);
+	}
+
+	if (test->read) {
+		ret = ioctl(fd, PCITEST_READ, test->size);
+		fprintf(stdout, "READ (%7ld bytes):\t\t", test->size);
+		if (ret < 0)
+			fprintf(stdout, "TEST FAILED\n");
+		else
+			fprintf(stdout, "%s\n", result[ret]);
+	}
+
+	if (test->copy) {
+		ret = ioctl(fd, PCITEST_COPY, test->size);
+		fprintf(stdout, "COPY (%7ld bytes):\t\t", test->size);
+		if (ret < 0)
+			fprintf(stdout, "TEST FAILED\n");
+		else
+			fprintf(stdout, "%s\n", result[ret]);
+	}
+
+	fflush(stdout);
+}
+
+int main(int argc, char **argv)
+{
+	int c;
+	struct pci_test *test;
+
+	test = calloc(1, sizeof(*test));
+	if (!test) {
+		perror("Fail to allocate memory for pci_test\n");
+		return -ENOMEM;
+	}
+
+	/* since '0' is a valid BAR number, initialize it to -1 */
+	test->barnum = -1;
+
+	/* set default size as 100KB */
+	test->size = 0x19000;
+
+	/* set default endpoint device */
+	test->device = "/dev/pci-endpoint-test.0";
+
+	while ((c = getopt(argc, argv, "D:b:m:lrwcs:")) != EOF)
+	switch (c) {
+	case 'D':
+		test->device = optarg;
+		continue;
+	case 'b':
+		test->barnum = atoi(optarg);
+		if (test->barnum < 0 || test->barnum > 5)
+			goto usage;
+		continue;
+	case 'l':
+		test->legacyirq = true;
+		continue;
+	case 'm':
+		test->msinum = atoi(optarg);
+		if (test->msinum < 1 || test->msinum > 32)
+			goto usage;
+		continue;
+	case 'r':
+		test->read = true;
+		continue;
+	case 'w':
+		test->write = true;
+		continue;
+	case 'c':
+		test->copy = true;
+		continue;
+	case 's':
+		test->size = strtoul(optarg, NULL, 0);
+		continue;
+	case '?':
+	case 'h':
+	default:
+usage:
+		fprintf(stderr,
+			"usage: %s [options]\n"
+			"Options:\n"
+			"\t-D <dev>		PCI endpoint test device {default: /dev/pci-endpoint-test.0}\n"
+			"\t-b <bar num>		BAR test (bar number between 0..5)\n"
+			"\t-m <msi num>		MSI test (msi number between 1..32)\n"
+			"\t-r			Read buffer test\n"
+			"\t-w			Write buffer test\n"
+			"\t-c			Copy buffer test\n"
+			"\t-s <size>		Size of buffer {default: 100KB}\n",
+			argv[0]);
+		return -EINVAL;
+	}
+
+	run_test(test);
+	return 0;
+}

tools/pci/pcitest.sh

···
+#!/bin/sh
+
+echo "BAR tests"
+echo
+
+bar=0
+
+while [ $bar -lt 6 ]
+do
+	pcitest -b $bar
+	bar=`expr $bar + 1`
+done
+echo
+
+echo "Interrupt tests"
+echo
+
+pcitest -l
+msi=1
+
+while [ $msi -lt 33 ]
+do
+        pcitest -m $msi
+        msi=`expr $msi + 1`
+done
+echo
+
+echo "Read Tests"
+echo
+
+pcitest -r -s 1
+pcitest -r -s 1024
+pcitest -r -s 1025
+pcitest -r -s 1024000
+pcitest -r -s 1024001
+echo
+
+echo "Write Tests"
+echo
+
+pcitest -w -s 1
+pcitest -w -s 1024
+pcitest -w -s 1025
+pcitest -w -s 1024000
+pcitest -w -s 1024001
+echo
+
+echo "Copy Tests"
+echo
+
+pcitest -c -s 1
+pcitest -c -s 1024
+pcitest -c -s 1025
+pcitest -c -s 1024000
+pcitest -c -s 1024001
+echo