Merge tag 'tegra-for-6.2-dt-bindings-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt

dt-bindings: Changes for v6.2-rc1

New memory client IDs and IOMMU stream IDs, as well as new compatible
strings are introduced to support more hardware on Tegra234. Some device
tree bindings are converted to json-schema to allow formal validation.

* tag 'tegra-for-6.2-dt-bindings-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
dt-bindings: usb: tegra-xusb: Convert to json-schema
dt-bindings: pwm: tegra: Convert to json-schema
dt-bindings: pinctrl: tegra194: Separate instances
dt-bindings: pinctrl: tegra: Convert to json-schema
dt-bindings: PCI: tegra234: Add ECAM support
dt-bindings: pwm: tegra: Document Tegra234 PWM
dt-bindings: Add bindings for Tegra234 NVDEC
dt-bindings: tegra: Update headers for Tegra234
dt-bindings: Add headers for NVDEC on Tegra234

Link: https://lore.kernel.org/r/[e-mail]
Signed-off-by: Arnd Bergmann <[e-mail]>

Documentation/devicetree/bindings/clock/nvidia,tegra124-dfll.txt

···
 };
 
 /* pinmux nodes added for completeness. Binding doc can be found in:
- * Documentation/devicetree/bindings/pinctrl/nvidia,tegra210-pinmux.txt
+ * Documentation/devicetree/bindings/pinctrl/nvidia,tegra210-pinmux.yaml
  */
 
 pinmux: pinmux@700008d4 {

Documentation/devicetree/bindings/gpu/host1x/nvidia,tegra234-nvdec.yaml

···
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/gpu/host1x/nvidia,tegra234-nvdec.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Device tree binding for NVIDIA Tegra234 NVDEC
+
+description: |
+  NVDEC is the hardware video decoder present on NVIDIA Tegra210
+  and newer chips. It is located on the Host1x bus and typically
+  programmed through Host1x channels.
+
+maintainers:
+  - Thierry Reding <[e-mail]>
+  - Mikko Perttunen <[e-mail]>
+
+properties:
+  $nodename:
+    pattern: "^nvdec@[0-9a-f]*$"
+
+  compatible:
+    enum:
+      - nvidia,tegra234-nvdec
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 3
+
+  clock-names:
+    items:
+      - const: nvdec
+      - const: fuse
+      - const: tsec_pka
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    items:
+      - const: nvdec
+
+  power-domains:
+    maxItems: 1
+
+  iommus:
+    maxItems: 1
+
+  dma-coherent: true
+
+  interconnects:
+    items:
+      - description: DMA read memory client
+      - description: DMA write memory client
+
+  interconnect-names:
+    items:
+      - const: dma-mem
+      - const: write
+
+  nvidia,memory-controller:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      phandle to the memory controller for determining information for the NVDEC
+      firmware secure carveout. This carveout is configured by the bootloader and
+      not accessible to CPU.
+
+  nvidia,bl-manifest-offset:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Offset to bootloader manifest from beginning of firmware that was configured by
+      the bootloader.
+
+  nvidia,bl-code-offset:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Offset to bootloader code section from beginning of firmware that was configured by
+      the bootloader.
+
+  nvidia,bl-data-offset:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Offset to bootloader data section from beginning of firmware that was configured by
+      the bootloader.
+
+  nvidia,os-manifest-offset:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Offset to operating system manifest from beginning of firmware that was configured by
+      the bootloader.
+
+  nvidia,os-code-offset:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Offset to operating system code section from beginning of firmware that was configured by
+      the bootloader.
+
+  nvidia,os-data-offset:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Offset to operating system data section from beginning of firmware that was configured
+      by the bootloader.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - power-domains
+  - nvidia,memory-controller
+  - nvidia,bl-manifest-offset
+  - nvidia,bl-code-offset
+  - nvidia,bl-data-offset
+  - nvidia,os-manifest-offset
+  - nvidia,os-code-offset
+  - nvidia,os-data-offset
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra234-clock.h>
+    #include <dt-bindings/memory/tegra234-mc.h>
+    #include <dt-bindings/power/tegra234-powergate.h>
+    #include <dt-bindings/reset/tegra234-reset.h>
+
+    nvdec@15480000 {
+            compatible = "nvidia,tegra234-nvdec";
+            reg = <0x15480000 0x00040000>;
+            clocks = <&bpmp TEGRA234_CLK_NVDEC>,
+                     <&bpmp TEGRA234_CLK_FUSE>,
+                     <&bpmp TEGRA234_CLK_TSEC_PKA>;
+            clock-names = "nvdec", "fuse", "tsec_pka";
+            resets = <&bpmp TEGRA234_RESET_NVDEC>;
+            reset-names = "nvdec";
+            power-domains = <&bpmp TEGRA234_POWER_DOMAIN_NVDEC>;
+            interconnects = <&mc TEGRA234_MEMORY_CLIENT_NVDECSRD &emc>,
+                            <&mc TEGRA234_MEMORY_CLIENT_NVDECSWR &emc>;
+            interconnect-names = "dma-mem", "write";
+            iommus = <&smmu_niso1 TEGRA234_SID_NVDEC>;
+            dma-coherent;
+
+            nvidia,memory-controller = <&mc>;
+
+            /* Placeholder values, to be replaced with values from overlay */
+            nvidia,bl-manifest-offset = <0>;
+            nvidia,bl-data-offset = <0>;
+            nvidia,bl-code-offset = <0>;
+            nvidia,os-manifest-offset = <0>;
+            nvidia,os-data-offset = <0>;
+            nvidia,os-code-offset = <0>;
+    };

Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.yaml

···
       - nvidia,tegra234-pcie
 
   reg:
+    minItems: 4
     items:
       - description: controller's application logic registers
       - description: configuration registers
···
           available for software access.
       - description: aperture where the Root Port's own configuration
           registers are available.
+      - description: aperture to access the configuration space through ECAM.
 
   reg-names:
+    minItems: 4
     items:
       - const: appl
       - const: config
       - const: atu_dma
       - const: dbi
+      - const: ecam
 
   interrupts:
     items:
···
 
 allOf:
   - $ref: /schemas/pci/snps,dw-pcie.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nvidia,tegra194-pcie
+    then:
+      properties:
+        reg:
+          maxItems: 4
+        reg-names:
+          maxItems: 4
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nvidia,tegra234-pcie
+    then:
+      properties:
+        reg:
+          minItems: 5
+        reg-names:
+          minItems: 5
 
 unevaluatedProperties: false
 
···
             reg = <0x00 0x14160000 0x0 0x00020000>, /* appl registers (128K)      */
                   <0x00 0x36000000 0x0 0x00040000>, /* configuration space (256K) */
                   <0x00 0x36040000 0x0 0x00040000>, /* iATU_DMA reg space (256K)  */
-                  <0x00 0x36080000 0x0 0x00040000>; /* DBI reg space (256K)       */
-            reg-names = "appl", "config", "atu_dma", "dbi";
+                  <0x00 0x36080000 0x0 0x00040000>, /* DBI reg space (256K)       */
+                  <0x24 0x30000000 0x0 0x10000000>; /* ECAM (256MB)               */
+            reg-names = "appl", "config", "atu_dma", "dbi", "ecam";
 
             #address-cells = <3>;
             #size-cells = <2>;

Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml

···
     maxItems: 5
     items:
       enum: [ dbi, dbi2, config, atu, atu_dma, app, appl, elbi, mgmt, ctrl,
-              parf, cfg, link, ulreg, smu, mpu, apb, phy ]
+              parf, cfg, link, ulreg, smu, mpu, apb, phy, ecam ]
 
   num-lanes:
     description: |

Documentation/devicetree/bindings/pinctrl/nvidia,tegra-pinmux-common.yaml

···
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/nvidia,tegra-pinmux-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra Pinmux Controller
+
+maintainers:
+  - Thierry Reding <[e-mail]>
+  - Jonathan Hunter <[e-mail]>
+
+description: |
+  Please refer to pinctrl-bindings.txt in this directory for details of the
+  common pinctrl bindings used by client devices, including the meaning of
+  the phrase "pin configuration node".
+
+  Tegra's pin configuration nodes act as a container for an arbitrary number
+  of subnodes. Each of these subnodes represents some desired configuration
+  for a pin, a group, or a list of pins or groups. This configuration can
+  include the mux function to select on those pin(s)/ group(s), and various
+  pin configuration parameters, such as pull-up, tristate, drive strength,
+  etc.
+
+  The name of each subnode is not important; all subnodes should be
+  enumerated and processed purely based on their content.
+
+  Each subnode only affects those parameters that are explicitly listed. In
+  other words, a subnode that lists a mux function but no pin configuration
+  parameters implies no information about any pin configuration parameters.
+
+  Similarly, a pin subnode that describes a pullup parameter implies no
+  information about e.g.  the mux function or tristate parameter. For this
+  reason, even seemingly boolean values are actually tristates in this
+  binding: unspecified, off, or on. Unspecified is represented as an absent
+  property, and off/on are represented as integer values 0 and 1.
+
+  Note that many of these properties are only valid for certain specific pins
+  or groups. See the Tegra TRM and various pinmux spreadsheets for complete
+  details regarding which groups support which functionality. The Linux
+  pinctrl driver may also be a useful reference, since it consolidates,
+  disambiguates, and corrects data from all those sources.
+
+properties:
+  nvidia,pins:
+    $ref: /schemas/types.yaml#/definitions/string-array
+    description: An array of strings. Each string contains the name of a pin
+      or group.  Valid values for these names are listed below.
+
+  nvidia,function:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: A string containing the name of the function to mux to the
+      pin or group. Valid values for function names are listed below. See the
+      Tegra TRM to determine which are valid for each pin or group.
+
+  nvidia,pull:
+    description: Pull-down/up setting to apply to the pin.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    oneOf:
+      - description: none
+        const: 0
+      - description: down
+        const: 1
+      - description: up
+        const: 2
+
+  nvidia,tristate:
+    description: Tristate setting to apply to the pin.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    oneOf:
+      - description: drive
+        const: 0
+      - description: tristate
+        const: 1
+
+  nvidia,schmitt:
+    description: Enable Schmitt trigger on the input.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    oneOf:
+      - description: disable Schmitt trigger on the input
+        const: 0
+      - description: enable Schmitt trigger on the input
+        const: 1
+
+  nvidia,pull-down-strength:
+    description: Controls drive strength. 0 is weakest. The range of valid
+      values depends on the pingroup. See "CAL_DRVDN" in the Tegra TRM.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  nvidia,pull-up-strength:
+    description: Controls drive strength. 0 is weakest. The range of valid
+      values depends on the pingroup. See "CAL_DRVUP" in the Tegra TRM.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  nvidia,high-speed-mode:
+    description: Enable high speed mode the pins.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    oneOf:
+      - description: normal speed mode
+        const: 0
+      - description: high speed mode
+        const: 1
+
+  nvidia,low-power-mode:
+    description: Controls the drive power or current. Valid values are from 0
+      through 3, where 0 specifies the least power and 3 specifies the most
+      power. See "Low Power Mode" or "LPMD1" and "LPMD0" in the Tegra TRM.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 0, 1, 2, 3 ]
+
+  nvidia,enable-input:
+    description: Enable the pin's input path.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    oneOf:
+      - description: disable input (i.e. output only)
+        const: 0
+      - description: enable input
+        const: 1
+
+  nvidia,open-drain:
+    description: Open-drain configuration for the pin.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    oneOf:
+      - description: disable open-drain
+        const: 0
+      - description: enable open-drain
+        const: 1
+
+  nvidia,lock:
+    description: Lock the pin configuration against further changes until
+      reset.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    oneOf:
+      - description: disable pin configuration lock
+        const: 0
+      - description: enable pin configuration lock
+        const: 1
+
+  nvidia,io-reset:
+    description: reset the I/O path
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 0, 1 ]
+
+  nvidia,rcv-sel:
+    description: select VIL/VIH receivers
+    $ref: /schemas/types.yaml#/definitions/uint32
+    oneOf:
+      - description: normal receivers
+        const: 0
+      - description: high-voltage receivers
+        const: 1
+
+  nvidia,drive-type:
+    description: Drive type to configure for the pin.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 0, 1, 2, 3 ]
+
+  nvidia,io-hv:
+    description: Select high-voltage receivers.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    oneOf:
+      - description: Use normal receivers.
+        const: 0
+      - description: Use high-voltage receivers.
+        const: 1
+
+  nvidia,slew-rate-rising:
+    description: Controls rising signal slew rate. 0 is fastest. The range of
+      valid values depends on the pingroup. See "DRVDN_SLWR" in the Tegra TRM.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  nvidia,slew-rate-falling:
+    description: Controls falling signal slew rate. 0 is fastest. The range of
+      valid values depends on the pingroup. See "DRVUP_SLWF" in the Tegra TRM.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+additionalProperties: true
+...

Documentation/devicetree/bindings/pinctrl/nvidia,tegra114-pinmux.txt

···
-NVIDIA Tegra114 pinmux controller
-
-The Tegra114 pinctrl binding is very similar to the Tegra20 and Tegra30
-pinctrl binding, as described in nvidia,tegra20-pinmux.txt and
-nvidia,tegra30-pinmux.txt. In fact, this document assumes that binding as
-a baseline, and only documents the differences between the two bindings.
-
-Required properties:
-- compatible: "nvidia,tegra114-pinmux"
-- reg: Should contain the register physical address and length for each of
-  the pad control and mux registers. The first bank of address must be the
-  driver strength pad control register address and second bank address must
-  be pinmux register address.
-
-Tegra114 adds the following optional properties for pin configuration subnodes:
-- nvidia,enable-input: Integer. Enable the pin's input path. 0: no, 1: yes.
-- nvidia,open-drain: Integer. Enable open drain mode. 0: no, 1: yes.
-- nvidia,lock: Integer. Lock the pin configuration against further changes
-    until reset. 0: no, 1: yes.
-- nvidia,io-reset: Integer. Reset the IO path. 0: no, 1: yes.
-- nvidia,rcv-sel: Integer. Select VIL/VIH receivers. 0: normal, 1: high.
-- nvidia,drive-type: Integer. Valid range 0...3.
-
-As with Tegra20 and Terga30, see the Tegra TRM for complete details regarding
-which groups support which functionality.
-
-Valid values for pin and group names are:
-
-  per-pin mux groups:
-
-    These all support nvidia,function, nvidia,tristate, nvidia,pull,
-    nvidia,enable-input, nvidia,lock. Some support nvidia,open-drain,
-    nvidia,io-reset and nvidia,rcv-sel.
-
-    ulpi_data0_po1, ulpi_data1_po2, ulpi_data2_po3, ulpi_data3_po4,
-    ulpi_data4_po5, ulpi_data5_po6, ulpi_data6_po7, ulpi_data7_po0,
-    ulpi_clk_py0, ulpi_dir_py1, ulpi_nxt_py2, ulpi_stp_py3, dap3_fs_pp0,
-    dap3_din_pp1, dap3_dout_pp2, dap3_sclk_pp3, pv0, pv1, sdmmc1_clk_pz0,
-    sdmmc1_cmd_pz1, sdmmc1_dat3_py4, sdmmc1_dat2_py5, sdmmc1_dat1_py6,
-    sdmmc1_dat0_py7, clk2_out_pw5, clk2_req_pcc5, hdmi_int_pn7, ddc_scl_pv4,
-    ddc_sda_pv5, uart2_rxd_pc3, uart2_txd_pc2, uart2_rts_n_pj6,
-    uart2_cts_n_pj5, uart3_txd_pw6, uart3_rxd_pw7, uart3_cts_n_pa1,
-    uart3_rts_n_pc0, pu0, pu1, pu2, pu3, pu4, pu5, pu6, gen1_i2c_sda_pc5,
-    gen1_i2c_scl_pc4, dap4_fs_pp4, dap4_din_pp5, dap4_dout_pp6, dap4_sclk_pp7,
-    clk3_out_pee0, clk3_req_pee1, gmi_wp_n_pc7, gmi_iordy_pi5, gmi_wait_pi7,
-    gmi_adv_n_pk0, gmi_clk_pk1, gmi_cs0_n_pj0, gmi_cs1_n_pj2, gmi_cs2_n_pk3,
-    gmi_cs3_n_pk4, gmi_cs4_n_pk2, gmi_cs6_n_pi3, gmi_cs7_n_pi6, gmi_ad0_pg0,
-    gmi_ad1_pg1, gmi_ad2_pg2, gmi_ad3_pg3, gmi_ad4_pg4, gmi_ad5_pg5,
-    gmi_ad6_pg6, gmi_ad7_pg7, gmi_ad8_ph0, gmi_ad9_ph1, gmi_ad10_ph2,
-    gmi_ad11_ph3, gmi_ad12_ph4, gmi_ad13_ph5, gmi_ad14_ph6, gmi_ad15_ph7,
-    gmi_a16_pj7, gmi_a17_pb0, gmi_a18_pb1, gmi_a19_pk7, gmi_wr_n_pi0,
-    gmi_oe_n_pi1, gmi_dqs_p_pj3, gmi_rst_n_pi4, gen2_i2c_scl_pt5,
-    gen2_i2c_sda_pt6, sdmmc4_clk_pcc4, sdmmc4_cmd_pt7, sdmmc4_dat0_paa0,
-    sdmmc4_dat1_paa1, sdmmc4_dat2_paa2, sdmmc4_dat3_paa3, sdmmc4_dat4_paa4,
-    sdmmc4_dat5_paa5, sdmmc4_dat6_paa6, sdmmc4_dat7_paa7, cam_mclk_pcc0,
-    pcc1, pbb0, cam_i2c_scl_pbb1, cam_i2c_sda_pbb2, pbb3, pbb4, pbb5, pbb6,
-    pbb7, pcc2, pwr_i2c_scl_pz6, pwr_i2c_sda_pz7, kb_row0_pr0, kb_row1_pr1,
-    kb_row2_pr2, kb_row3_pr3, kb_row4_pr4, kb_row5_pr5, kb_row6_pr6,
-    kb_row7_pr7, kb_row8_ps0, kb_row9_ps1, kb_row10_ps2, kb_col0_pq0,
-    kb_col1_pq1, kb_col2_pq2, kb_col3_pq3, kb_col4_pq4, kb_col5_pq5,
-    kb_col6_pq6, kb_col7_pq7, clk_32k_out_pa0, sys_clk_req_pz5, core_pwr_req,
-    cpu_pwr_req, pwr_int_n, owr, dap1_fs_pn0, dap1_din_pn1, dap1_dout_pn2,
-    dap1_sclk_pn3, clk1_req_pee2, clk1_out_pw4, spdif_in_pk6, spdif_out_pk5,
-    dap2_fs_pa2, dap2_din_pa4, dap2_dout_pa5, dap2_sclk_pa3, dvfs_pwm_px0,
-    gpio_x1_aud_px1, gpio_x3_aud_px3, dvfs_clk_px2, gpio_x4_aud_px4,
-    gpio_x5_aud_px5, gpio_x6_aud_px6, gpio_x7_aud_px7, sdmmc3_clk_pa6,
-    sdmmc3_cmd_pa7, sdmmc3_dat0_pb7, sdmmc3_dat1_pb6, sdmmc3_dat2_pb5,
-    sdmmc3_dat3_pb4, hdmi_cec_pee3, sdmmc1_wp_n_pv3, sdmmc3_cd_n_pv2,
-    gpio_w2_aud_pw2, gpio_w3_aud_pw3, usb_vbus_en0_pn4, usb_vbus_en1_pn5,
-    sdmmc3_clk_lb_in_pee5, sdmmc3_clk_lb_out_pee4, reset_out_n.
-
-  drive groups:
-
-    These all support nvidia,pull-down-strength, nvidia,pull-up-strength,
-    nvidia,slew-rate-rising, nvidia,slew-rate-falling. Most but not all
-    support nvidia,high-speed-mode, nvidia,schmitt, nvidia,low-power-mode
-    and nvidia,drive-type.
-
-    ao1, ao2, at1, at2, at3, at4, at5, cdev1, cdev2, dap1, dap2, dap3, dap4,
-    dbg, sdio3, spi, uaa, uab, uart2, uart3, sdio1, ddc, gma, gme, gmf, gmg,
-    gmh, owr, uda.
-
-Valid values for nvidia,functions are:
-
-  blink, cec, cldvfs, clk12, cpu, dap, dap1, dap2, dev3, displaya,
-  displaya_alt, displayb, dtv, emc_dll, extperiph1, extperiph2,
-  extperiph3, gmi, gmi_alt, hda, hsi, i2c1, i2c2, i2c3, i2c4, i2cpwr,
-  i2s0, i2s1, i2s2, i2s3, i2s4, irda, kbc, nand, nand_alt, owr, pmi,
-  pwm0, pwm1, pwm2, pwm3, pwron, reset_out_n, rsvd1, rsvd2, rsvd3,
-  rsvd4, sdmmc1, sdmmc2, sdmmc3, sdmmc4, soc, spdif, spi1, spi2, spi3,
-  spi4, spi5, spi6, sysclk, trace, uarta, uartb, uartc, uartd, ulpi,
-  usb, vgp1, vgp2, vgp3, vgp4, vgp5, vgp6, vi, vi_alt1, vi_alt3
-
-Example:
-
-	pinmux: pinmux {
-		compatible = "nvidia,tegra114-pinmux";
-		reg = <0x70000868 0x148		/* Pad control registers */
-		       0x70003000 0x40c>;	/* PinMux registers */
-	};
-
-Example board file extract:
-
-	pinctrl {
-		sdmmc4_default: pinmux {
-			sdmmc4_clk_pcc4 {
-				nvidia,pins = "sdmmc4_clk_pcc4",
-				nvidia,function = "sdmmc4";
-				nvidia,pull = <0>;
-				nvidia,tristate = <0>;
-			};
-			sdmmc4_dat0_paa0 {
-				nvidia,pins = "sdmmc4_dat0_paa0",
-						"sdmmc4_dat1_paa1",
-						"sdmmc4_dat2_paa2",
-						"sdmmc4_dat3_paa3",
-						"sdmmc4_dat4_paa4",
-						"sdmmc4_dat5_paa5",
-						"sdmmc4_dat6_paa6",
-						"sdmmc4_dat7_paa7";
-				nvidia,function = "sdmmc4";
-				nvidia,pull = <2>;
-				nvidia,tristate = <0>;
-			};
-		};
-	};
-
-	sdhci@78000400 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&sdmmc4_default>;
-	};

Documentation/devicetree/bindings/pinctrl/nvidia,tegra114-pinmux.yaml

···
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/nvidia,tegra114-pinmux.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra114 pinmux Controller
+
+maintainers:
+  - Thierry Reding <[e-mail]>
+  - Jon Hunter <[e-mail]>
+
+properties:
+  compatible:
+    const: nvidia,tegra114-pinmux
+
+  reg:
+    items:
+      - description: pad control registers
+      - description: mux registers
+
+patternProperties:
+  "^pinmux(-[a-z0-9-_]+)?$":
+    type: object
+    properties:
+      phandle: true
+
+    # pin groups
+    additionalProperties:
+      $ref: nvidia,tegra-pinmux-common.yaml
+      additionalProperties: false
+      properties:
+        nvidia,pins:
+          items:
+            enum: [ ulpi_data0_po1, ulpi_data1_po2, ulpi_data2_po3,
+                    ulpi_data3_po4, ulpi_data4_po5, ulpi_data5_po6,
+                    ulpi_data6_po7, ulpi_data7_po0, ulpi_clk_py0, ulpi_dir_py1,
+                    ulpi_nxt_py2, ulpi_stp_py3, dap3_fs_pp0, dap3_din_pp1,
+                    dap3_dout_pp2, dap3_sclk_pp3, pv0, pv1, sdmmc1_clk_pz0,
+                    sdmmc1_cmd_pz1, sdmmc1_dat3_py4, sdmmc1_dat2_py5,
+                    sdmmc1_dat1_py6, sdmmc1_dat0_py7, clk2_out_pw5,
+                    clk2_req_pcc5, hdmi_int_pn7, ddc_scl_pv4, ddc_sda_pv5,
+                    uart2_rxd_pc3, uart2_txd_pc2, uart2_rts_n_pj6,
+                    uart2_cts_n_pj5, uart3_txd_pw6, uart3_rxd_pw7,
+                    uart3_cts_n_pa1, uart3_rts_n_pc0, pu0, pu1, pu2, pu3, pu4,
+                    pu5, pu6, gen1_i2c_sda_pc5, gen1_i2c_scl_pc4, dap4_fs_pp4,
+                    dap4_din_pp5, dap4_dout_pp6, dap4_sclk_pp7, clk3_out_pee0,
+                    clk3_req_pee1, gmi_wp_n_pc7, gmi_iordy_pi5, gmi_wait_pi7,
+                    gmi_adv_n_pk0, gmi_clk_pk1, gmi_cs0_n_pj0, gmi_cs1_n_pj2,
+                    gmi_cs2_n_pk3, gmi_cs3_n_pk4, gmi_cs4_n_pk2, gmi_cs6_n_pi3,
+                    gmi_cs7_n_pi6, gmi_ad0_pg0, gmi_ad1_pg1, gmi_ad2_pg2,
+                    gmi_ad3_pg3, gmi_ad4_pg4, gmi_ad5_pg5, gmi_ad6_pg6,
+                    gmi_ad7_pg7, gmi_ad8_ph0, gmi_ad9_ph1, gmi_ad10_ph2,
+                    gmi_ad11_ph3, gmi_ad12_ph4, gmi_ad13_ph5, gmi_ad14_ph6,
+                    gmi_ad15_ph7, gmi_a16_pj7, gmi_a17_pb0, gmi_a18_pb1,
+                    gmi_a19_pk7, gmi_wr_n_pi0, gmi_oe_n_pi1, gmi_dqs_p_pj3,
+                    gmi_rst_n_pi4, gen2_i2c_scl_pt5, gen2_i2c_sda_pt6,
+                    sdmmc4_clk_pcc4, sdmmc4_cmd_pt7, sdmmc4_dat0_paa0,
+                    sdmmc4_dat1_paa1, sdmmc4_dat2_paa2, sdmmc4_dat3_paa3,
+                    sdmmc4_dat4_paa4, sdmmc4_dat5_paa5, sdmmc4_dat6_paa6,
+                    sdmmc4_dat7_paa7, cam_mclk_pcc0, pcc1, pbb0,
+                    cam_i2c_scl_pbb1, cam_i2c_sda_pbb2, pbb3, pbb4, pbb5, pbb6,
+                    pbb7, pcc2, pwr_i2c_scl_pz6, pwr_i2c_sda_pz7, kb_row0_pr0,
+                    kb_row1_pr1, kb_row2_pr2, kb_row3_pr3, kb_row4_pr4,
+                    kb_row5_pr5, kb_row6_pr6, kb_row7_pr7, kb_row8_ps0,
+                    kb_row9_ps1, kb_row10_ps2, kb_col0_pq0, kb_col1_pq1,
+                    kb_col2_pq2, kb_col3_pq3, kb_col4_pq4, kb_col5_pq5,
+                    kb_col6_pq6, kb_col7_pq7, clk_32k_out_pa0, sys_clk_req_pz5,
+                    core_pwr_req, cpu_pwr_req, pwr_int_n, owr, dap1_fs_pn0,
+                    dap1_din_pn1, dap1_dout_pn2, dap1_sclk_pn3, clk1_req_pee2,
+                    clk1_out_pw4, spdif_in_pk6, spdif_out_pk5, dap2_fs_pa2,
+                    dap2_din_pa4, dap2_dout_pa5, dap2_sclk_pa3, dvfs_pwm_px0,
+                    gpio_x1_aud_px1, gpio_x3_aud_px3, dvfs_clk_px2,
+                    gpio_x4_aud_px4, gpio_x5_aud_px5, gpio_x6_aud_px6,
+                    gpio_x7_aud_px7, sdmmc3_clk_pa6, sdmmc3_cmd_pa7,
+                    sdmmc3_dat0_pb7, sdmmc3_dat1_pb6, sdmmc3_dat2_pb5,
+                    sdmmc3_dat3_pb4, hdmi_cec_pee3, sdmmc1_wp_n_pv3,
+                    sdmmc3_cd_n_pv2, gpio_w2_aud_pw2, gpio_w3_aud_pw3,
+                    usb_vbus_en0_pn4, usb_vbus_en1_pn5, sdmmc3_clk_lb_in_pee5,
+                    sdmmc3_clk_lb_out_pee4, reset_out_n,
+                    # drive groups
+                    drive_ao1, drive_ao2, drive_at1, drive_at2, drive_at3,
+                    drive_at4, drive_at5, drive_cdev1, drive_cdev2, drive_dap1,
+                    drive_dap2, drive_dap3, drive_dap4, drive_dbg, drive_sdio3,
+                    drive_spi, drive_uaa, drive_uab, drive_uart2, drive_uart3,
+                    drive_sdio1, drive_ddc, drive_gma, drive_gme, drive_gmf,
+                    drive_gmg, drive_gmh, drive_owr, drive_uda ]
+
+        nvidia,function:
+          enum: [ blink, cec, cldvfs, clk12, cpu, dap, dap1, dap2, dev3,
+                  displaya, displaya_alt, displayb, dtv, emc_dll, extperiph1,
+                  extperiph2, extperiph3, gmi, gmi_alt, hda, hsi, i2c1, i2c2,
+                  i2c3, i2c4, i2cpwr, i2s0, i2s1, i2s2, i2s3, i2s4, irda, kbc,
+                  nand, nand_alt, owr, pmi, pwm0, pwm1, pwm2, pwm3, pwron,
+                  reset_out_n, rsvd1, rsvd2, rsvd3, rsvd4, sdmmc1, sdmmc2,
+                  sdmmc3, sdmmc4, soc, spdif, spi1, spi2, spi3, spi4, spi5,
+                  spi6, sysclk, trace, uarta, uartb, uartc, uartd, ulpi, usb,
+                  vgp1, vgp2, vgp3, vgp4, vgp5, vgp6, vi, vi_alt1, vi_alt3 ]
+
+        nvidia,pull: true
+        nvidia,tristate: true
+        nvidia,schmitt: true
+        nvidia,pull-down-strength: true
+        nvidia,pull-up-strength: true
+        nvidia,high-speed-mode: true
+        nvidia,low-power-mode: true
+        nvidia,enable-input: true
+        nvidia,open-drain: true
+        nvidia,lock: true
+        nvidia,io-reset: true
+        nvidia,rcv-sel: true
+        nvidia,drive-type: true
+        nvidia,slew-rate-rising: true
+        nvidia,slew-rate-falling: true
+
+      required:
+        - nvidia,pins
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    pinmux@70000868 {
+        compatible = "nvidia,tegra114-pinmux";
+        reg = <0x70000868 0x148>, /* Pad control registers */
+              <0x70003000 0x40c>; /* PinMux registers */
+
+        pinmux {
+            sdmmc4_clk_pcc4 {
+                nvidia,pins = "sdmmc4_clk_pcc4";
+                nvidia,function = "sdmmc4";
+                nvidia,pull = <0>;
+                nvidia,tristate = <0>;
+            };
+
+            sdmmc4_dat0_paa0 {
+                nvidia,pins = "sdmmc4_dat0_paa0",
+                              "sdmmc4_dat1_paa1",
+                              "sdmmc4_dat2_paa2",
+                              "sdmmc4_dat3_paa3",
+                              "sdmmc4_dat4_paa4",
+                              "sdmmc4_dat5_paa5",
+                              "sdmmc4_dat6_paa6",
+                              "sdmmc4_dat7_paa7";
+                nvidia,function = "sdmmc4";
+                nvidia,pull = <2>;
+                nvidia,tristate = <0>;
+            };
+        };
+    };
+...

Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-pinmux.txt

···
-NVIDIA Tegra124 pinmux controller
-
-The Tegra124 pinctrl binding is very similar to the Tegra20 and Tegra30
-pinctrl binding, as described in nvidia,tegra20-pinmux.txt and
-nvidia,tegra30-pinmux.txt. In fact, this document assumes that binding as
-a baseline, and only documents the differences between the two bindings.
-
-Required properties:
-- compatible: For Tegra124, must contain "nvidia,tegra124-pinmux".  For
-  Tegra132, must contain '"nvidia,tegra132-pinmux", "nvidia-tegra124-pinmux"'.
-- reg: Should contain a list of base address and size pairs for:
-    -- first entry - the drive strength and pad control registers.
-    -- second entry - the pinmux registers
-    -- third entry - the MIPI_PAD_CTRL register
-
-Tegra124 adds the following optional properties for pin configuration subnodes.
-The macros for options are defined in the
-	include/dt-binding/pinctrl/pinctrl-tegra.h.
-- nvidia,enable-input: Integer. Enable the pin's input path.
-		enable :TEGRA_PIN_ENABLE and
-		disable or output only: TEGRA_PIN_DISABLE.
-- nvidia,open-drain: Integer.
-		enable: TEGRA_PIN_ENABLE.
-		disable: TEGRA_PIN_DISABLE.
-- nvidia,lock: Integer. Lock the pin configuration against further changes
-    until reset.
-		enable: TEGRA_PIN_ENABLE.
-		disable: TEGRA_PIN_DISABLE.
-- nvidia,io-reset: Integer. Reset the IO path.
-		enable: TEGRA_PIN_ENABLE.
-		disable: TEGRA_PIN_DISABLE.
-- nvidia,rcv-sel: Integer. Select VIL/VIH receivers.
-		normal: TEGRA_PIN_DISABLE
-		high: TEGRA_PIN_ENABLE
-
-Please refer the Tegra TRM for complete details regarding which groups
-support which functionality.
-
-Valid values for pin and group names are:
-
-  per-pin mux groups:
-
-    These all support nvidia,function, nvidia,tristate, nvidia,pull,
-    nvidia,enable-input. Some support nvidia,lock nvidia,open-drain,
-    nvidia,io-reset and nvidia,rcv-sel.
-
-	ulpi_data0_po1, ulpi_data1_po2, ulpi_data2_po3, ulpi_data3_po4,
-	ulpi_data4_po5, ulpi_data5_po6, ulpi_data6_po7, ulpi_data7_po0,
-	ulpi_clk_py0, ulpi_dir_py1, ulpi_nxt_py2, ulpi_stp_py3, dap3_fs_pp0,
-	dap3_din_pp1, dap3_dout_pp2, dap3_sclk_pp3, pv0, pv1, sdmmc1_clk_pz0,
-	sdmmc1_cmd_pz1, sdmmc1_dat3_py4, sdmmc1_dat2_py5, sdmmc1_dat1_py6,
-	sdmmc1_dat0_py7, clk2_out_pw5, clk2_req_pcc5, hdmi_int_pn7, ddc_scl_pv4,
-	ddc_sda_pv5, uart2_rxd_pc3, uart2_txd_pc2, uart2_rts_n_pj6,
-	uart2_cts_n_pj5, uart3_txd_pw6, uart3_rxd_pw7, uart3_cts_n_pa1,
-	uart3_rts_n_pc0, pu0, pu1, pu2, pu3, pu4, pu5, pu6, gen1_i2c_scl_pc4,
-	gen1_i2c_sda_pc5, dap4_fs_pp4, dap4_din_pp5, dap4_dout_pp6,
-	dap4_sclk_pp7, clk3_out_pee0, clk3_req_pee1, pc7, pi5, pi7, pk0, pk1,
-	pj0, pj2, pk3, pk4, pk2, pi3, pi6, pg0, pg1, pg2, pg3, pg4, pg5, pg6,
-	pg7, ph0, ph1, ph2, ph3, ph4, ph5, ph6, ph7, pj7, pb0, pb1, pk7, pi0,
-	pi1, pi2, pi4, gen2_i2c_scl_pt5, gen2_i2c_sda_pt6, sdmmc4_clk_pcc4,
-	sdmmc4_cmd_pt7, sdmmc4_dat0_paa0, sdmmc4_dat1_paa1, sdmmc4_dat2_paa2,
-	sdmmc4_dat3_paa3, sdmmc4_dat4_paa4, sdmmc4_dat5_paa5, sdmmc4_dat6_paa6,
-	sdmmc4_dat7_paa7, cam_mclk_pcc0, pcc1, pbb0, cam_i2c_scl_pbb1,
-	cam_i2c_sda_pbb2, pbb3, pbb4, pbb5, pbb6, pbb7, pcc2, jtag_rtck,
-	pwr_i2c_scl_pz6, pwr_i2c_sda_pz7, kb_row0_pr0, kb_row1_pr1, kb_row2_pr2,
-	kb_row3_pr3, kb_row4_pr4, kb_row5_pr5, kb_row6_pr6, kb_row7_pr7,
-	kb_row8_ps0, kb_row9_ps1, kb_row10_ps2, kb_row11_ps3, kb_row12_ps4,
-	kb_row13_ps5, kb_row14_ps6, kb_row15_ps7, kb_col0_pq0, kb_col1_pq1,
-	kb_col2_pq2, kb_col3_pq3, kb_col4_pq4, kb_col5_pq5, kb_col6_pq6,
-	kb_col7_pq7, clk_32k_out_pa0, core_pwr_req, cpu_pwr_req, pwr_int_n,
-	clk_32k_in, owr, dap1_fs_pn0, dap1_din_pn1, dap1_dout_pn2,
-	dap1_sclk_pn3, dap_mclk1_req_pee2, dap_mclk1_pw4, spdif_in_pk6,
-	spdif_out_pk5, dap2_fs_pa2, dap2_din_pa4, dap2_dout_pa5, dap2_sclk_pa3,
-	dvfs_pwm_px0, gpio_x1_aud_px1, gpio_x3_aud_px3, dvfs_clk_px2,
-	gpio_x4_aud_px4, gpio_x5_aud_px5, gpio_x6_aud_px6, gpio_x7_aud_px7,
-	sdmmc3_clk_pa6, sdmmc3_cmd_pa7, sdmmc3_dat0_pb7, sdmmc3_dat1_pb6,
-	sdmmc3_dat2_pb5, sdmmc3_dat3_pb4, pex_l0_rst_n_pdd1,
-	pex_l0_clkreq_n_pdd2, pex_wake_n_pdd3, pex_l1_rst_n_pdd5,
-	pex_l1_clkreq_n_pdd6, hdmi_cec_pee3, sdmmc1_wp_n_pv3,
-	sdmmc3_cd_n_pv2, gpio_w2_aud_pw2, gpio_w3_aud_pw3, usb_vbus_en0_pn4,
-	usb_vbus_en1_pn5, sdmmc3_clk_lb_out_pee4, sdmmc3_clk_lb_in_pee5,
-	gmi_clk_lb, reset_out_n, kb_row16_pt0, kb_row17_pt1, usb_vbus_en2_pff1,
-	pff2, dp_hpd_pff0,
-
-  drive groups:
-
-    These all support nvidia,pull-down-strength, nvidia,pull-up-strength,
-    nvidia,slew-rate-rising, nvidia,slew-rate-falling. Most but not all
-    support nvidia,high-speed-mode, nvidia,schmitt, nvidia,low-power-mode
-    and nvidia,drive-type.
-
-    ao1, ao2, at1, at2, at3, at4, at5, cdev1, cdev2, dap1, dap2, dap3, dap4,
-    dbg, sdio3, spi, uaa, uab, uart2, uart3, sdio1, ddc, gma, gme, gmf, gmg,
-    gmh, owr, uda, gpv, dev3, cec, usb_vbus_en, ao3, ao0, hv0, sdio4, ao4.
-
-  MIPI pad control groups:
-
-    These support only the nvidia,function property.
-
-    dsi_b
-
-Valid values for nvidia,functions are:
-
-  blink, cec, cldvfs, clk12, cpu, dap, dap1, dap2, dev3, displaya,
-  displaya_alt, displayb, dtv, extperiph1, extperiph2, extperiph3,
-  gmi, gmi_alt, hda, hsi, i2c1, i2c2, i2c3, i2c4, i2cpwr, i2s0,
-  i2s1, i2s2, i2s3, i2s4, irda, kbc, owr, pmi, pwm0, pwm1, pwm2, pwm3,
-  pwron, reset_out_n, rsvd1, rsvd2, rsvd3, rsvd4, sdmmc1, sdmmc2, sdmmc3,
-  sdmmc4, soc, spdif, spi1, spi2, spi3, spi4, spi5, spi6, trace, uarta,
-  uartb, uartc, uartd, ulpi, usb, vgp1, vgp2, vgp3, vgp4, vgp5, vgp6,
-  vi, vi_alt1, vi_alt3, vimclk2, vimclk2_alt, sata, ccla, pe0, pe, pe1,
-  dp, rtck, sys, clk tmds, csi, dsi_b
-
-Example:
-
-	pinmux: pinmux {
-		compatible = "nvidia,tegra124-pinmux";
-		reg = <0x0 0x70000868 0x0 0x164>, /* Pad control registers */
-		      <0x0 0x70003000 0x0 0x434>, /* Mux registers */
-		      <0x0 0x70000820 0x0 0x8>;   /* MIPI pad control */
-	};
-
-Example pinmux entries:
-
-	pinctrl {
-		sdmmc4_default: pinmux {
-			sdmmc4_clk_pcc4 {
-				nvidia,pins = "sdmmc4_clk_pcc4",
-				nvidia,function = "sdmmc4";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-
-			sdmmc4_dat0_paa0 {
-				nvidia,pins = "sdmmc4_dat0_paa0",
-						"sdmmc4_dat1_paa1",
-						"sdmmc4_dat2_paa2",
-						"sdmmc4_dat3_paa3",
-						"sdmmc4_dat4_paa4",
-						"sdmmc4_dat5_paa5",
-						"sdmmc4_dat6_paa6",
-						"sdmmc4_dat7_paa7";
-				nvidia,function = "sdmmc4";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-		};
-	};
-
-	sdhci@78000400 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&sdmmc4_default>;
-	};

Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-pinmux.yaml

···
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/nvidia,tegra124-pinmux.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra124 Pinmux Controller
+
+maintainers:
+  - Thierry Reding <[e-mail]>
+  - Jon Hunter <[e-mail]>
+
+description: The Tegra124 pinctrl binding is very similar to the Tegra20 and
+  Tegra30 pinctrl binding, as described in nvidia,tegra20-pinmux.yaml and
+  nvidia,tegra30-pinmux.yaml. In fact, this document assumes that binding as a
+  baseline, and only documents the differences between the two bindings.
+
+properties:
+  compatible:
+    oneOf:
+      - const: nvidia,tegra124-pinmux
+      - items:
+          - const: nvidia,tegra132-pinmux
+          - const: nvidia,tegra124-pinmux
+
+  reg:
+    items:
+      - description: driver strength and pad control registers
+      - description: pinmux registers
+      - description: MIPI_PAD_CTRL registers
+
+patternProperties:
+  "^pinmux(-[a-z0-9-_]+)?$":
+    type: object
+    properties:
+      phandle: true
+
+    # pin groups
+    additionalProperties:
+      $ref: nvidia,tegra-pinmux-common.yaml
+      additionalProperties: false
+      properties:
+        nvidia,pins:
+          $ref: /schemas/types.yaml#/definitions/string-array
+          items:
+            enum: [ ulpi_data0_po1, ulpi_data1_po2, ulpi_data2_po3,
+                    ulpi_data3_po4, ulpi_data4_po5, ulpi_data5_po6,
+                    ulpi_data6_po7, ulpi_data7_po0, ulpi_clk_py0, ulpi_dir_py1,
+                    ulpi_nxt_py2, ulpi_stp_py3, dap3_fs_pp0, dap3_din_pp1,
+                    dap3_dout_pp2, dap3_sclk_pp3, pv0, pv1, sdmmc1_clk_pz0,
+                    sdmmc1_cmd_pz1, sdmmc1_dat3_py4, sdmmc1_dat2_py5,
+                    sdmmc1_dat1_py6, sdmmc1_dat0_py7, clk2_out_pw5,
+                    clk2_req_pcc5, hdmi_int_pn7, ddc_scl_pv4, ddc_sda_pv5,
+                    uart2_rxd_pc3, uart2_txd_pc2, uart2_rts_n_pj6,
+                    uart2_cts_n_pj5, uart3_txd_pw6, uart3_rxd_pw7,
+                    uart3_cts_n_pa1, uart3_rts_n_pc0, pu0, pu1, pu2, pu3, pu4,
+                    pu5, pu6, gen1_i2c_scl_pc4, gen1_i2c_sda_pc5, dap4_fs_pp4,
+                    dap4_din_pp5, dap4_dout_pp6, dap4_sclk_pp7, clk3_out_pee0,
+                    clk3_req_pee1, pc7, pi5, pi7, pk0, pk1, pj0, pj2, pk3, pk4,
+                    pk2, pi3, pi6, pg0, pg1, pg2, pg3, pg4, pg5, pg6, pg7, ph0,
+                    ph1, ph2, ph3, ph4, ph5, ph6, ph7, pj7, pb0, pb1, pk7, pi0,
+                    pi1, pi2, pi4, gen2_i2c_scl_pt5, gen2_i2c_sda_pt6,
+                    sdmmc4_clk_pcc4, sdmmc4_cmd_pt7, sdmmc4_dat0_paa0,
+                    sdmmc4_dat1_paa1, sdmmc4_dat2_paa2, sdmmc4_dat3_paa3,
+                    sdmmc4_dat4_paa4, sdmmc4_dat5_paa5, sdmmc4_dat6_paa6,
+                    sdmmc4_dat7_paa7, cam_mclk_pcc0, pcc1, pbb0,
+                    cam_i2c_scl_pbb1, cam_i2c_sda_pbb2, pbb3, pbb4, pbb5, pbb6,
+                    pbb7, pcc2, jtag_rtck, pwr_i2c_scl_pz6, pwr_i2c_sda_pz7,
+                    kb_row0_pr0, kb_row1_pr1, kb_row2_pr2, kb_row3_pr3,
+                    kb_row4_pr4, kb_row5_pr5, kb_row6_pr6, kb_row7_pr7,
+                    kb_row8_ps0, kb_row9_ps1, kb_row10_ps2, kb_row11_ps3,
+                    kb_row12_ps4, kb_row13_ps5, kb_row14_ps6, kb_row15_ps7,
+                    kb_col0_pq0, kb_col1_pq1, kb_col2_pq2, kb_col3_pq3,
+                    kb_col4_pq4, kb_col5_pq5, kb_col6_pq6, kb_col7_pq7,
+                    clk_32k_out_pa0, core_pwr_req, cpu_pwr_req, pwr_int_n,
+                    clk_32k_in, owr, dap1_fs_pn0, dap1_din_pn1, dap1_dout_pn2,
+                    dap1_sclk_pn3, dap_mclk1_req_pee2, dap_mclk1_pw4,
+                    spdif_in_pk6, spdif_out_pk5, dap2_fs_pa2, dap2_din_pa4,
+                    dap2_dout_pa5, dap2_sclk_pa3, dvfs_pwm_px0,
+                    gpio_x1_aud_px1, gpio_x3_aud_px3, dvfs_clk_px2,
+                    gpio_x4_aud_px4, gpio_x5_aud_px5, gpio_x6_aud_px6,
+                    gpio_x7_aud_px7, sdmmc3_clk_pa6, sdmmc3_cmd_pa7,
+                    sdmmc3_dat0_pb7, sdmmc3_dat1_pb6, sdmmc3_dat2_pb5,
+                    sdmmc3_dat3_pb4, pex_l0_rst_n_pdd1, pex_l0_clkreq_n_pdd2,
+                    pex_wake_n_pdd3, pex_l1_rst_n_pdd5, pex_l1_clkreq_n_pdd6,
+                    hdmi_cec_pee3, sdmmc1_wp_n_pv3, sdmmc3_cd_n_pv2,
+                    gpio_w2_aud_pw2, gpio_w3_aud_pw3, usb_vbus_en0_pn4,
+                    usb_vbus_en1_pn5, sdmmc3_clk_lb_out_pee4,
+                    sdmmc3_clk_lb_in_pee5, gmi_clk_lb, reset_out_n,
+                    kb_row16_pt0, kb_row17_pt1, usb_vbus_en2_pff1, pff2,
+                    dp_hpd_pff0,
+                    # drive groups
+                    drive_ao1, drive_ao2, drive_at1, drive_at2, drive_at3,
+                    drive_at4, drive_at5, drive_cdev1, drive_cdev2, drive_dap1,
+                    drive_dap2, drive_dap3, drive_dap4, drive_dbg, drive_sdio3,
+                    drive_spi, drive_uaa, drive_uab, drive_uart2, drive_uart3,
+                    drive_sdio1, drive_ddc, drive_gma, drive_gme, drive_gmf,
+                    drive_gmg, drive_gmh, drive_owr, drive_uda, drive_gpv,
+                    drive_dev3, drive_cec, drive_usb_vbus_en, drive_ao3,
+                    drive_ao0, drive_hv0, drive_sdio4, drive_ao4,
+                    # MIPI pad control groups
+                    mipi_pad_ctrl_dsi_b ]
+
+        nvidia,function:
+          enum: [ blink, cec, cldvfs, clk12, cpu, dap, dap1, dap2, dev3,
+                  displaya, displaya_alt, displayb, dtv, extperiph1,
+                  extperiph2, extperiph3, gmi, gmi_alt, hda, hsi, i2c1, i2c2,
+                  i2c3, i2c4, i2cpwr, i2s0, i2s1, i2s2, i2s3, i2s4, irda, kbc,
+                  owr, pmi, pwm0, pwm1, pwm2, pwm3, pwron, reset_out_n, rsvd1,
+                  rsvd2, rsvd3, rsvd4, sdmmc1, sdmmc2, sdmmc3, sdmmc4, soc,
+                  spdif, spi1, spi2, spi3, spi4, spi5, spi6, trace, uarta,
+                  uartb, uartc, uartd, ulpi, usb, vgp1, vgp2, vgp3, vgp4, vgp5,
+                  vgp6, vi, vi_alt1, vi_alt3, vimclk2, vimclk2_alt, sata, ccla,
+                  pe0, pe, pe1, dp, rtck, sys, clk, tmds, csi, dsi_b ]
+
+        nvidia,pull: true
+        nvidia,tristate: true
+        nvidia,schmitt: true
+        nvidia,pull-down-strength: true
+        nvidia,pull-up-strength: true
+        nvidia,high-speed-mode: true
+        nvidia,low-power-mode: true
+        nvidia,enable-input: true
+        nvidia,open-drain: true
+        nvidia,lock: true
+        nvidia,io-reset: true
+        nvidia,rcv-sel: true
+        nvidia,drive-type: true
+        nvidia,slew-rate-rising: true
+        nvidia,slew-rate-falling: true
+
+      required:
+        - nvidia,pins
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra124-car.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/pinctrl/pinctrl-tegra.h>
+
+    pinmux@70000868 {
+        compatible = "nvidia,tegra124-pinmux";
+        reg = <0x70000868 0x164>, /* Pad control registers */
+              <0x70003000 0x434>, /* Mux registers */
+              <0x70000820 0x8>;   /* MIPI pad control */
+
+        sdmmc4_default: pinmux {
+            sdmmc4_clk_pcc4 {
+                nvidia,pins = "sdmmc4_clk_pcc4";
+                nvidia,function = "sdmmc4";
+                nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+                nvidia,tristate = <TEGRA_PIN_DISABLE>;
+            };
+
+            sdmmc4_dat0_paa0 {
+                nvidia,pins = "sdmmc4_dat0_paa0",
+                              "sdmmc4_dat1_paa1",
+                              "sdmmc4_dat2_paa2",
+                              "sdmmc4_dat3_paa3",
+                              "sdmmc4_dat4_paa4",
+                              "sdmmc4_dat5_paa5",
+                              "sdmmc4_dat6_paa6",
+                              "sdmmc4_dat7_paa7";
+                nvidia,function = "sdmmc4";
+                nvidia,pull = <TEGRA_PIN_PULL_UP>;
+                nvidia,tristate = <TEGRA_PIN_DISABLE>;
+            };
+        };
+    };
+...

Documentation/devicetree/bindings/pinctrl/nvidia,tegra194-pinmux.txt

···
-NVIDIA Tegra194 pinmux controller
-
-Required properties:
-- compatible: "nvidia,tegra194-pinmux"
-- reg: Should contain a list of base address and size pairs for:
-  - first entry: The APB_MISC_GP_*_PADCTRL registers (pad control)
-  - second entry: The PINMUX_AUX_* registers (pinmux)
-
-Please refer to pinctrl-bindings.txt in this directory for details of the
-common pinctrl bindings used by client devices, including the meaning of the
-phrase "pin configuration node".
-
-Tegra's pin configuration nodes act as a container for an arbitrary number of
-subnodes. Each of these subnodes represents some desired configuration for a
-pin, a group, or a list of pins or groups. This configuration can include the
-mux function to select on those pin(s)/group(s), and various pin configuration
-parameters, such as pull-up, tristate, drive strength, etc.
-
-See the TRM to determine which properties and values apply to each pin/group.
-Macro values for property values are defined in
-include/dt-binding/pinctrl/pinctrl-tegra.h.
-
-Required subnode-properties:
-- nvidia,pins : An array of strings. Each string contains the name of a pin or
-    group. Valid values for these names are listed below.
-
-Optional subnode-properties:
-- nvidia,function: A string containing the name of the function to mux to the
-    pin or group.
-- nvidia,pull: Integer, representing the pull-down/up to apply to the pin.
-    0: none, 1: down, 2: up.
-- nvidia,tristate: Integer.
-    0: drive, 1: tristate.
-- nvidia,enable-input: Integer. Enable the pin's input path.
-    enable :TEGRA_PIN_ENABLE and
-    disable or output only: TEGRA_PIN_DISABLE.
-- nvidia,open-drain: Integer.
-    enable: TEGRA_PIN_ENABLE.
-    disable: TEGRA_PIN_DISABLE.
-- nvidia,lock: Integer. Lock the pin configuration against further changes
-    until reset.
-    enable: TEGRA_PIN_ENABLE.
-    disable: TEGRA_PIN_DISABLE.
-- nvidia,io-hv: Integer. Select high-voltage receivers.
-    normal: TEGRA_PIN_DISABLE
-    high: TEGRA_PIN_ENABLE
-- nvidia,schmitt: Integer. Enables Schmitt Trigger on the input.
-    normal: TEGRA_PIN_DISABLE
-    high: TEGRA_PIN_ENABLE
-- nvidia,drive-type: Integer. Valid range 0...3.
-- nvidia,pull-down-strength: Integer. Controls drive strength. 0 is weakest.
-    The range of valid values depends on the pingroup. See "CAL_DRVDN" in the
-    Tegra TRM.
-- nvidia,pull-up-strength: Integer. Controls drive strength. 0 is weakest.
-    The range of valid values depends on the pingroup. See "CAL_DRVUP" in the
-    Tegra TRM.
-
-Valid values for pin and group names (nvidia,pin) are:
-
-    These correspond to Tegra PADCTL_* (pinmux) registers.
-
-  Mux groups:
-
-    These correspond to Tegra PADCTL_* (pinmux) registers. Any property
-    that exists in those registers may be set for the following pin names.
-
-    pex_l5_clkreq_n_pgg0, pex_l5_rst_n_pgg1
-
-  Drive groups:
-
-    These registers controls a single pin for which a mux group exists.
-    See the list above for the pin name to use when configuring the pinmux.
-
-    pex_l5_clkreq_n_pgg0, pex_l5_rst_n_pgg1
-
-Valid values for nvidia,functions are:
-
-    pe5
-
-Power Domain:
-    pex_l5_clkreq_n_pgg0 and pex_l5_rst_n_pgg1 are part of PCIE C5 power
-    partition. Client devices must enable this partition before accessing
-    these pins here.
-
-
-Example:
-
-		tegra_pinctrl: pinmux: pinmux@2430000 {
-			compatible = "nvidia,tegra194-pinmux";
-			reg = <0x2430000 0x17000
-			       0xc300000 0x4000>;
-
-			pinctrl-names = "pex_rst";
-			pinctrl-0 = <&pex_rst_c5_out_state>;
-
-			pex_rst_c5_out_state: pex_rst_c5_out {
-				pex_rst {
-					nvidia,pins = "pex_l5_rst_n_pgg1";
-					nvidia,schmitt = <TEGRA_PIN_DISABLE>;
-					nvidia,lpdr = <TEGRA_PIN_ENABLE>;
-					nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-					nvidia,io-hv = <TEGRA_PIN_ENABLE>;
-					nvidia,tristate = <TEGRA_PIN_DISABLE>;
-					nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				};
-			};
-		};

Documentation/devicetree/bindings/pinctrl/nvidia,tegra194-pinmux.yaml

···
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/nvidia,tegra194-pinmux.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra194 Pinmux Controller
+
+maintainers:
+  - Thierry Reding <[e-mail]>
+  - Jon Hunter <[e-mail]>
+
+properties:
+  compatible:
+    enum:
+      - nvidia,tegra194-pinmux
+      - nvidia,tegra194-pinmux-aon
+
+  reg:
+    items:
+      - description: pinmux registers
+
+patternProperties:
+  "^pinmux(-[a-z0-9-_]+)?$":
+    type: object
+    properties:
+      phandle: true
+
+    # pin groups
+    additionalProperties:
+      $ref: nvidia,tegra-pinmux-common.yaml
+      unevaluatedProperties: false
+      properties:
+        nvidia,function:
+          enum: [ aud, can0, can1, ccla, dca, dcb, dgpu, directdc, directdc1,
+                  displaya, displayb, dmic1, dmic2, dmic3, dmic4, dmic5, dp,
+                  dspk0, dspk1, eqos, extperiph1, extperiph2, extperiph3,
+                  extperiph4, gp, gpio, hdmi, i2c1, i2c2, i2c3, i2c5, i2c8,
+                  i2s1, i2s2, i2s3, i2s4, i2s5, i2s6, igpu, iqc1, iqc2, mipi,
+                  nv, pe0, pe1, pe2, pe3, pe4, pe5, qspi, qspi0, qspi1, rsvd0,
+                  rsvd1, rsvd2, rsvd3, sata, sce, sdmmc1, sdmmc3, sdmmc4, slvs,
+                  soc, spdif, spi1, spi2, spi3, touch, uarta, uartb, uartc,
+                  uartd, uarte, uartg, ufs0, usb, vgp1, vgp2, vgp3, vgp4, vgp5,
+                  vgp6, wdt ]
+
+        nvidia,pull: true
+        nvidia,tristate: true
+        nvidia,schmitt: true
+        nvidia,enable-input: true
+        nvidia,open-drain: true
+        nvidia,lock: true
+        nvidia,drive-type: true
+        nvidia,io-hv: true
+
+      required:
+        - nvidia,pins
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          const: nvidia,tegra194-pinmux
+    then:
+      patternProperties:
+        "^pinmux(-[a-z0-9-_]+)?$":
+          type: object
+          additionalProperties:
+            properties:
+              nvidia,pins:
+                description: An array of strings. Each string contains the name
+                  of a pin or group. Valid values for these names are listed
+                  below.
+
+                  Note that the pex_l5_clkreq_n_pgg0 and pex_l5_rst_n_pgg1 pins
+                  are part of PCIE C5 power partition. Client devices must
+                  enable this partition before accessing the configuration for
+                  these pins.
+                items:
+                  enum: [ dap6_sclk_pa0, dap6_dout_pa1, dap6_din_pa2,
+                          dap6_fs_pa3, dap4_sclk_pa4, dap4_dout_pa5,
+                          dap4_din_pa6, dap4_fs_pa7, cpu_pwr_req_0_pb0,
+                          cpu_pwr_req_1_pb1, qspi0_sck_pc0, qspi0_cs_n_pc1,
+                          qspi0_io0_pc2, qspi0_io1_pc3, qspi0_io2_pc4,
+                          qspi0_io3_pc5, qspi1_sck_pc6, qspi1_cs_n_pc7,
+                          qspi1_io0_pd0, qspi1_io1_pd1, qspi1_io2_pd2,
+                          qspi1_io3_pd3, eqos_txc_pe0, eqos_td0_pe1,
+                          eqos_td1_pe2, eqos_td2_pe3, eqos_td3_pe4,
+                          eqos_tx_ctl_pe5, eqos_rd0_pe6, eqos_rd1_pe7,
+                          eqos_rd2_pf0, eqos_rd3_pf1, eqos_rx_ctl_pf2,
+                          eqos_rxc_pf3, eqos_sma_mdio_pf4, eqos_sma_mdc_pf5,
+                          soc_gpio00_pg0, soc_gpio01_pg1, soc_gpio02_pg2,
+                          soc_gpio03_pg3, soc_gpio08_pg4, soc_gpio09_pg5,
+                          soc_gpio10_pg6, soc_gpio11_pg7, soc_gpio12_ph0,
+                          soc_gpio13_ph1, soc_gpio14_ph2, uart4_tx_ph3,
+                          uart4_rx_ph4, uart4_rts_ph5, uart4_cts_ph6,
+                          dap2_sclk_ph7, dap2_dout_pi0, dap2_din_pi1,
+                          dap2_fs_pi2, gen1_i2c_scl_pi3, gen1_i2c_sda_pi4,
+                          sdmmc1_clk_pj0, sdmmc1_cmd_pj1, sdmmc1_dat0_pj2,
+                          sdmmc1_dat1_pj3, sdmmc1_dat2_pj4, sdmmc1_dat3_pj5,
+                          pex_l0_clkreq_n_pk0, pex_l0_rst_n_pk1,
+                          pex_l1_clkreq_n_pk2, pex_l1_rst_n_pk3,
+                          pex_l2_clkreq_n_pk4, pex_l2_rst_n_pk5,
+                          pex_l3_clkreq_n_pk6, pex_l3_rst_n_pk7,
+                          pex_l4_clkreq_n_pl0, pex_l4_rst_n_pl1,
+                          pex_wake_n_pl2, sata_dev_slp_pl3, dp_aux_ch0_hpd_pm0,
+                          dp_aux_ch1_hpd_pm1, dp_aux_ch2_hpd_pm2,
+                          dp_aux_ch3_hpd_pm3, hdmi_cec_pm4, soc_gpio50_pm5,
+                          soc_gpio51_pm6, soc_gpio52_pm7, soc_gpio53_pn0,
+                          soc_gpio54_pn1, soc_gpio55_pn2, sdmmc3_clk_po0,
+                          sdmmc3_cmd_po1, sdmmc3_dat0_po2, sdmmc3_dat1_po3,
+                          sdmmc3_dat2_po4, sdmmc3_dat3_po5, extperiph1_clk_pp0,
+                          extperiph2_clk_pp1, cam_i2c_scl_pp2, cam_i2c_sda_pp3,
+                          soc_gpio04_pp4, soc_gpio05_pp5, soc_gpio06_pp6,
+                          soc_gpio07_pp7, soc_gpio20_pq0, soc_gpio21_pq1,
+                          soc_gpio22_pq2, soc_gpio23_pq3, soc_gpio40_pq4,
+                          soc_gpio41_pq5, soc_gpio42_pq6, soc_gpio43_pq7,
+                          soc_gpio44_pr0, soc_gpio45_pr1, uart1_tx_pr2,
+                          uart1_rx_pr3, uart1_rts_pr4, uart1_cts_pr5,
+                          dap1_sclk_ps0, dap1_dout_ps1, dap1_din_ps2,
+                          dap1_fs_ps3, aud_mclk_ps4, soc_gpio30_ps5,
+                          soc_gpio31_ps6, soc_gpio32_ps7, soc_gpio33_pt0,
+                          dap3_sclk_pt1, dap3_dout_pt2, dap3_din_pt3,
+                          dap3_fs_pt4, dap5_sclk_pt5, dap5_dout_pt6,
+                          dap5_din_pt7, dap5_fs_pu0, directdc1_clk_pv0,
+                          directdc1_in_pv1, directdc1_out0_pv2,
+                          directdc1_out1_pv3, directdc1_out2_pv4,
+                          directdc1_out3_pv5, directdc1_out4_pv6,
+                          directdc1_out5_pv7, directdc1_out6_pw0,
+                          directdc1_out7_pw1, gpu_pwr_req_px0, cv_pwr_req_px1,
+                          gp_pwm2_px2, gp_pwm3_px3, uart2_tx_px4, uart2_rx_px5,
+                          uart2_rts_px6, uart2_cts_px7, spi3_sck_py0,
+                          spi3_miso_py1, spi3_mosi_py2, spi3_cs0_py3,
+                          spi3_cs1_py4, uart5_tx_py5, uart5_rx_py6,
+                          uart5_rts_py7, uart5_cts_pz0, usb_vbus_en0_pz1,
+                          usb_vbus_en1_pz2, spi1_sck_pz3, spi1_miso_pz4,
+                          spi1_mosi_pz5, spi1_cs0_pz6, spi1_cs1_pz7,
+                          ufs0_ref_clk_pff0, ufs0_rst_pff1,
+                          pex_l5_clkreq_n_pgg0, pex_l5_rst_n_pgg1,
+                          directdc_comp, sdmmc4_clk, sdmmc4_cmd, sdmmc4_dqs,
+                          sdmmc4_dat7, sdmmc4_dat6, sdmmc4_dat5, sdmmc4_dat4,
+                          sdmmc4_dat3, sdmmc4_dat2, sdmmc4_dat1, sdmmc4_dat0,
+                          sdmmc1_comp, sdmmc1_hv_trim, sdmmc3_comp,
+                          sdmmc3_hv_trim, eqos_comp, qspi_comp,
+                          # drive groups
+                          drive_soc_gpio33_pt0, drive_soc_gpio32_ps7,
+                          drive_soc_gpio31_ps6, drive_soc_gpio30_ps5,
+                          drive_aud_mclk_ps4, drive_dap1_fs_ps3,
+                          drive_dap1_din_ps2, drive_dap1_dout_ps1,
+                          drive_dap1_sclk_ps0, drive_dap3_fs_pt4,
+                          drive_dap3_din_pt3, drive_dap3_dout_pt2,
+                          drive_dap3_sclk_pt1, drive_dap5_fs_pu0,
+                          drive_dap5_din_pt7, drive_dap5_dout_pt6,
+                          drive_dap5_sclk_pt5, drive_dap6_fs_pa3,
+                          drive_dap6_din_pa2, drive_dap6_dout_pa1,
+                          drive_dap6_sclk_pa0, drive_dap4_fs_pa7,
+                          drive_dap4_din_pa6, drive_dap4_dout_pa5,
+                          drive_dap4_sclk_pa4, drive_extperiph2_clk_pp1,
+                          drive_extperiph1_clk_pp0, drive_cam_i2c_sda_pp3,
+                          drive_cam_i2c_scl_pp2, drive_soc_gpio40_pq4,
+                          drive_soc_gpio41_pq5, drive_soc_gpio42_pq6,
+                          drive_soc_gpio43_pq7, drive_soc_gpio44_pr0,
+                          drive_soc_gpio45_pr1, drive_soc_gpio20_pq0,
+                          drive_soc_gpio21_pq1, drive_soc_gpio22_pq2,
+                          drive_soc_gpio23_pq3, drive_soc_gpio04_pp4,
+                          drive_soc_gpio05_pp5, drive_soc_gpio06_pp6,
+                          drive_soc_gpio07_pp7, drive_uart1_cts_pr5,
+                          drive_uart1_rts_pr4, drive_uart1_rx_pr3,
+                          drive_uart1_tx_pr2, drive_dap2_din_pi1,
+                          drive_dap2_dout_pi0, drive_dap2_fs_pi2,
+                          drive_dap2_sclk_ph7, drive_uart4_cts_ph6,
+                          drive_uart4_rts_ph5, drive_uart4_rx_ph4,
+                          drive_uart4_tx_ph3, drive_soc_gpio03_pg3,
+                          drive_soc_gpio02_pg2, drive_soc_gpio01_pg1,
+                          drive_soc_gpio00_pg0, drive_gen1_i2c_scl_pi3,
+                          drive_gen1_i2c_sda_pi4, drive_soc_gpio08_pg4,
+                          drive_soc_gpio09_pg5, drive_soc_gpio10_pg6,
+                          drive_soc_gpio11_pg7, drive_soc_gpio12_ph0,
+                          drive_soc_gpio13_ph1, drive_soc_gpio14_ph2,
+                          drive_soc_gpio50_pm5, drive_soc_gpio51_pm6,
+                          drive_soc_gpio52_pm7, drive_soc_gpio53_pn0,
+                          drive_soc_gpio54_pn1, drive_soc_gpio55_pn2,
+                          drive_dp_aux_ch0_hpd_pm0, drive_dp_aux_ch1_hpd_pm1,
+                          drive_dp_aux_ch2_hpd_pm2, drive_dp_aux_ch3_hpd_pm3,
+                          drive_hdmi_cec_pm4, drive_pex_l2_clkreq_n_pk4,
+                          drive_pex_wake_n_pl2, drive_pex_l1_clkreq_n_pk2,
+                          drive_pex_l1_rst_n_pk3, drive_pex_l0_clkreq_n_pk0,
+                          drive_pex_l0_rst_n_pk1, drive_pex_l2_rst_n_pk5,
+                          drive_pex_l3_clkreq_n_pk6, drive_pex_l3_rst_n_pk7,
+                          drive_pex_l4_clkreq_n_pl0, drive_pex_l4_rst_n_pl1,
+                          drive_sata_dev_slp_pl3, drive_pex_l5_clkreq_n_pgg0,
+                          drive_pex_l5_rst_n_pgg1, drive_cpu_pwr_req_1_pb1,
+                          drive_cpu_pwr_req_0_pb0, drive_sdmmc1_clk_pj0,
+                          drive_sdmmc1_cmd_pj1, drive_sdmmc1_dat3_pj5,
+                          drive_sdmmc1_dat2_pj4, drive_sdmmc1_dat1_pj3,
+                          drive_sdmmc1_dat0_pj2, drive_sdmmc3_dat3_po5,
+                          drive_sdmmc3_dat2_po4, drive_sdmmc3_dat1_po3,
+                          drive_sdmmc3_dat0_po2, drive_sdmmc3_cmd_po1,
+                          drive_sdmmc3_clk_po0, drive_gpu_pwr_req_px0,
+                          drive_spi3_miso_py1, drive_spi1_cs0_pz6,
+                          drive_spi3_cs0_py3, drive_spi1_miso_pz4,
+                          drive_spi3_cs1_py4, drive_gp_pwm3_px3,
+                          drive_gp_pwm2_px2, drive_spi1_sck_pz3,
+                          drive_spi3_sck_py0, drive_spi1_cs1_pz7,
+                          drive_spi1_mosi_pz5, drive_spi3_mosi_py2,
+                          drive_cv_pwr_req_px1, drive_uart2_tx_px4,
+                          drive_uart2_rx_px5, drive_uart2_rts_px6,
+                          drive_uart2_cts_px7, drive_uart5_rx_py6,
+                          drive_uart5_tx_py5, drive_uart5_rts_py7,
+                          drive_uart5_cts_pz0, drive_usb_vbus_en0_pz1,
+                          drive_usb_vbus_en1_pz2, drive_ufs0_rst_pff1,
+                          drive_ufs0_ref_clk_pff0 ]
+
+  - if:
+      properties:
+        compatible:
+          const: nvidia,tegra194-pinmux-aon
+    then:
+      patternProperties:
+        "^pinmux(-[a-z0-9-_]+)?$":
+          type: object
+          additionalProperties:
+            properties:
+              nvidia,pins:
+                items:
+                  enum: [ can1_dout_paa0, can1_din_paa1, can0_dout_paa2,
+                          can0_din_paa3, can0_stb_paa4, can0_en_paa5,
+                          can0_wake_paa6, can0_err_paa7, can1_stb_pbb0,
+                          can1_en_pbb1, can1_wake_pbb2, can1_err_pbb3,
+                          spi2_sck_pcc0, spi2_miso_pcc1, spi2_mosi_pcc2,
+                          spi2_cs0_pcc3, touch_clk_pcc4, uart3_tx_pcc5,
+                          uart3_rx_pcc6, gen2_i2c_scl_pcc7, gen2_i2c_sda_pdd0,
+                          gen8_i2c_scl_pdd1, gen8_i2c_sda_pdd2,
+                          safe_state_pee0, vcomp_alert_pee1,
+                          ao_retention_n_pee2, batt_oc_pee3, power_on_pee4,
+                          pwr_i2c_scl_pee5, pwr_i2c_sda_pee6, sys_reset_n,
+                          shutdown_n, pmu_int_n, soc_pwr_req, clk_32k_in,
+                          # drive groups
+                          drive_shutdown_n, drive_pmu_int_n,
+                          drive_safe_state_pee0, drive_vcomp_alert_pee1,
+                          drive_soc_pwr_req, drive_batt_oc_pee3,
+                          drive_clk_32k_in, drive_power_on_pee4,
+                          drive_pwr_i2c_scl_pee5, drive_pwr_i2c_sda_pee6,
+                          drive_ao_retention_n_pee2, drive_touch_clk_pcc4,
+                          drive_uart3_rx_pcc6, drive_uart3_tx_pcc5,
+                          drive_gen8_i2c_sda_pdd2, drive_gen8_i2c_scl_pdd1,
+                          drive_spi2_mosi_pcc2, drive_gen2_i2c_scl_pcc7,
+                          drive_spi2_cs0_pcc3, drive_gen2_i2c_sda_pdd0,
+                          drive_spi2_sck_pcc0, drive_spi2_miso_pcc1,
+                          drive_can1_dout_paa0, drive_can1_din_paa1,
+                          drive_can0_dout_paa2, drive_can0_din_paa3,
+                          drive_can0_stb_paa4, drive_can0_en_paa5,
+                          drive_can0_wake_paa6, drive_can0_err_paa7,
+                          drive_can1_stb_pbb0, drive_can1_en_pbb1,
+                          drive_can1_wake_pbb2, drive_can1_err_pbb3 ]
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    #include <dt-bindings/pinctrl/pinctrl-tegra.h>
+
+    pinmux@2430000 {
+        compatible = "nvidia,tegra194-pinmux";
+        reg = <0x2430000 0x17000>;
+
+        pinctrl-names = "pex_rst";
+        pinctrl-0 = <&pex_rst_c5_out_state>;
+
+        pex_rst_c5_out_state: pinmux-pex-rst-c5-out {
+            pex_rst {
+                nvidia,pins = "pex_l5_rst_n_pgg1";
+                nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+                nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+                nvidia,io-hv = <TEGRA_PIN_ENABLE>;
+                nvidia,tristate = <TEGRA_PIN_DISABLE>;
+                nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+            };
+        };
+    };
+...

Documentation/devicetree/bindings/pinctrl/nvidia,tegra20-pinmux.txt

···
-NVIDIA Tegra20 pinmux controller
-
-Required properties:
-- compatible: "nvidia,tegra20-pinmux"
-- reg: Should contain the register physical address and length for each of
-  the tri-state, mux, pull-up/down, and pad control register sets.
-
-Please refer to pinctrl-bindings.txt in this directory for details of the
-common pinctrl bindings used by client devices, including the meaning of the
-phrase "pin configuration node".
-
-Tegra's pin configuration nodes act as a container for an arbitrary number of
-subnodes. Each of these subnodes represents some desired configuration for a
-pin, a group, or a list of pins or groups. This configuration can include the
-mux function to select on those pin(s)/group(s), and various pin configuration
-parameters, such as pull-up, tristate, drive strength, etc.
-
-The name of each subnode is not important; all subnodes should be enumerated
-and processed purely based on their content.
-
-Each subnode only affects those parameters that are explicitly listed. In
-other words, a subnode that lists a mux function but no pin configuration
-parameters implies no information about any pin configuration parameters.
-Similarly, a pin subnode that describes a pullup parameter implies no
-information about e.g. the mux function or tristate parameter. For this
-reason, even seemingly boolean values are actually tristates in this binding:
-unspecified, off, or on. Unspecified is represented as an absent property,
-and off/on are represented as integer values 0 and 1.
-
-Required subnode-properties:
-- nvidia,pins : An array of strings. Each string contains the name of a pin or
-    group. Valid values for these names are listed below.
-
-Optional subnode-properties:
-- nvidia,function: A string containing the name of the function to mux to the
-  pin or group. Valid values for function names are listed below. See the Tegra
-  TRM to determine which are valid for each pin or group.
-- nvidia,pull: Integer, representing the pull-down/up to apply to the pin.
-    0: none, 1: down, 2: up.
-- nvidia,tristate: Integer.
-    0: drive, 1: tristate.
-- nvidia,high-speed-mode: Integer. Enable high speed mode the pins.
-    0: no, 1: yes.
-- nvidia,schmitt: Integer. Enables Schmitt Trigger on the input.
-    0: no, 1: yes.
-- nvidia,low-power-mode: Integer. Valid values 0-3. 0 is least power, 3 is
-    most power. Controls the drive power or current. See "Low Power Mode"
-    or "LPMD1" and "LPMD0" in the Tegra TRM.
-- nvidia,pull-down-strength: Integer. Controls drive strength. 0 is weakest.
-    The range of valid values depends on the pingroup. See "CAL_DRVDN" in the
-    Tegra TRM.
-- nvidia,pull-up-strength: Integer. Controls drive strength. 0 is weakest.
-    The range of valid values depends on the pingroup. See "CAL_DRVUP" in the
-    Tegra TRM.
-- nvidia,slew-rate-rising: Integer. Controls rising signal slew rate. 0 is
-    fastest. The range of valid values depends on the pingroup. See
-    "DRVDN_SLWR" in the Tegra TRM.
-- nvidia,slew-rate-falling: Integer. Controls falling signal slew rate. 0 is
-    fastest. The range of valid values depends on the pingroup. See
-    "DRVUP_SLWF" in the Tegra TRM.
-
-Note that many of these properties are only valid for certain specific pins
-or groups. See the Tegra TRM and various pinmux spreadsheets for complete
-details regarding which groups support which functionality. The Linux pinctrl
-driver may also be a useful reference, since it consolidates, disambiguates,
-and corrects data from all those sources.
-
-Valid values for pin and group names are:
-
-  mux groups:
-
-    These all support nvidia,function, nvidia,tristate, and many support
-    nvidia,pull.
-
-    ata, atb, atc, atd, ate, cdev1, cdev2, crtp, csus, dap1, dap2, dap3, dap4,
-    ddc, dta, dtb, dtc, dtd, dte, dtf, gma, gmb, gmc, gmd, gme, gpu, gpu7,
-    gpv, hdint, i2cp, irrx, irtx, kbca, kbcb, kbcc, kbcd, kbce, kbcf, lcsn,
-    ld0, ld1, ld2, ld3, ld4, ld5, ld6, ld7, ld8, ld9, ld10, ld11, ld12, ld13,
-    ld14, ld15, ld16, ld17, ldc, ldi, lhp0, lhp1, lhp2, lhs, lm0, lm1, lpp,
-    lpw0, lpw1, lpw2, lsc0, lsc1, lsck, lsda, lsdi, lspi, lvp0, lvp1, lvs,
-    owc, pmc, pta, rm, sdb, sdc, sdd, sdio1, slxa, slxc, slxd, slxk, spdi,
-    spdo, spia, spib, spic, spid, spie, spif, spig, spih, uaa, uab, uac, uad,
-    uca, ucb, uda.
-
-  tristate groups:
-
-    These only support nvidia,pull.
-
-    ck32, ddrc, pmca, pmcb, pmcc, pmcd, pmce, xm2c, xm2d, ls, lc, ld17_0,
-    ld19_18, ld21_20, ld23_22.
-
-  drive groups:
-
-    With some exceptions, these support nvidia,high-speed-mode,
-    nvidia,schmitt, nvidia,low-power-mode, nvidia,pull-down-strength,
-    nvidia,pull-up-strength, nvidia,slew-rate-rising, nvidia,slew-rate-falling.
-
-    drive_ao1, drive_ao2, drive_at1, drive_at2, drive_cdev1, drive_cdev2,
-    drive_csus, drive_dap1, drive_dap2, drive_dap3, drive_dap4, drive_dbg,
-    drive_lcd1, drive_lcd2, drive_sdmmc2, drive_sdmmc3, drive_spi, drive_uaa,
-    drive_uab, drive_uart2, drive_uart3, drive_vi1, drive_vi2, drive_xm2a,
-    drive_xm2c, drive_xm2d, drive_xm2clk, drive_sdio1, drive_crt, drive_ddc,
-    drive_gma, drive_gmb, drive_gmc, drive_gmd, drive_gme, drive_owr,
-    drive_uda.
-
-Valid values for nvidia,functions are:
-
-  ahb_clk, apb_clk, audio_sync, crt, dap1, dap2, dap3, dap4, dap5,
-  displaya, displayb, emc_test0_dll, emc_test1_dll, gmi, gmi_int,
-  hdmi, i2cp, i2c1, i2c2, i2c3, ide, irda, kbc, mio, mipi_hs, nand,
-  osc, owr, pcie, plla_out, pllc_out1, pllm_out1, pllp_out2, pllp_out3,
-  pllp_out4, pwm, pwr_intr, pwr_on, rsvd1, rsvd2, rsvd3, rsvd4, rtck,
-  sdio1, sdio2, sdio3, sdio4, sflash, spdif, spi1, spi2, spi2_alt,
-  spi3, spi4, trace, twc, uarta, uartb, uartc, uartd, uarte, ulpi,
-  vi, vi_sensor_clk, xio
-
-Example:
-
-	pinctrl@70000000 {
-		compatible = "nvidia,tegra20-pinmux";
-		reg = < 0x70000014 0x10    /* Tri-state registers */
-			0x70000080 0x20    /* Mux registers */
-			0x700000a0 0x14    /* Pull-up/down registers */
-			0x70000868 0xa8 >; /* Pad control registers */
-	};
-
-Example board file extract:
-
-	pinctrl@70000000 {
-		sdio4_default: sdio4_default {
-			atb {
-				nvidia,pins = "atb", "gma", "gme";
-				nvidia,function = "sdio4";
-				nvidia,pull = <0>;
-				nvidia,tristate = <0>;
-			};
-		};
-	};
-
-	sdhci@c8000600 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&sdio4_default>;
-	};

Documentation/devicetree/bindings/pinctrl/nvidia,tegra20-pinmux.yaml

···
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/nvidia,tegra20-pinmux.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra20 Pinmux Controller
+
+maintainers:
+  - Thierry Reding <[e-mail]>
+  - Jon Hunter <[e-mail]>
+
+properties:
+  compatible:
+    const: nvidia,tegra20-pinmux
+
+  reg:
+    items:
+      - description: tri-state registers
+      - description: mux register
+      - description: pull-up/down registers
+      - description: pad control registers
+
+patternProperties:
+  "^pinmux(-[a-z0-9-_]+)?$":
+    type: object
+    properties:
+      phandle: true
+
+    # pin groups
+    additionalProperties:
+      $ref: nvidia,tegra-pinmux-common.yaml
+      additionalProperties: false
+      properties:
+        nvidia,pins:
+          items:
+            enum: [ ata, atb, atc, atd, ate, cdev1, cdev2, crtp, csus, dap1,
+                    dap2, dap3, dap4, ddc, dta, dtb, dtc, dtd, dte, dtf, gma,
+                    gmb, gmc, gmd, gme, gpu, gpu7, gpv, hdint, i2cp, irrx,
+                    irtx, kbca, kbcb, kbcc, kbcd, kbce, kbcf, lcsn, ld0, ld1,
+                    ld2, ld3, ld4, ld5, ld6, ld7, ld8, ld9, ld10, ld11, ld12,
+                    ld13, ld14, ld15, ld16, ld17, ldc, ldi, lhp0, lhp1, lhp2,
+                    lhs, lm0, lm1, lpp, lpw0, lpw1, lpw2, lsc0, lsc1, lsck,
+                    lsda, lsdi, lspi, lvp0, lvp1, lvs, owc, pmc, pta, rm, sdb,
+                    sdc, sdd, sdio1, slxa, slxc, slxd, slxk, spdi, spdo, spia,
+                    spib, spic, spid, spie, spif, spig, spih, uaa, uab, uac,
+                    uad, uca, ucb, uda,
+                    # tristate groups
+                    ck32, ddrc, pmca, pmcb, pmcc, pmcd, pmce, xm2c, xm2d, ls,
+                    lc, ld17_0, ld19_18, ld21_20, ld23_22,
+                    # drive groups
+                    drive_ao1, drive_ao2, drive_at1, drive_at2, drive_cdev1,
+                    drive_cdev2, drive_csus, drive_dap1, drive_dap2,
+                    drive_dap3, drive_dap4, drive_dbg, drive_lcd1, drive_lcd2,
+                    drive_sdmmc2, drive_sdmmc3, drive_spi, drive_uaa,
+                    drive_uab, drive_uart2, drive_uart3, drive_vi1, drive_vi2,
+                    drive_xm2a, drive_xm2c, drive_xm2d, drive_xm2clk,
+                    drive_sdio1, drive_crt, drive_ddc, drive_gma, drive_gmb,
+                    drive_gmc, drive_gmd, drive_gme, drive_owr, drive_uda ]
+
+        nvidia,function:
+          enum: [ ahb_clk, apb_clk, audio_sync, crt, dap1, dap2, dap3, dap4,
+                  dap5, displaya, displayb, emc_test0_dll, emc_test1_dll, gmi,
+                  gmi_int, hdmi, i2cp, i2c1, i2c2, i2c3, ide, irda, kbc, mio,
+                  mipi_hs, nand, osc, owr, pcie, plla_out, pllc_out1,
+                  pllm_out1, pllp_out2, pllp_out3, pllp_out4, pwm, pwr_intr,
+                  pwr_on, rsvd1, rsvd2, rsvd3, rsvd4, rtck, sdio1, sdio2,
+                  sdio3, sdio4, sflash, spdif, spi1, spi2, spi2_alt, spi3,
+                  spi4, trace, twc, uarta, uartb, uartc, uartd, uarte, ulpi,
+                  vi, vi_sensor_clk, xio ]
+
+        nvidia,pull: true
+        nvidia,tristate: true
+        nvidia,schmitt: true
+        nvidia,pull-down-strength: true
+        nvidia,pull-up-strength: true
+        nvidia,high-speed-mode: true
+        nvidia,low-power-mode: true
+        nvidia,slew-rate-rising: true
+        nvidia,slew-rate-falling: true
+
+      required:
+        - nvidia,pins
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra20-car.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    pinctrl@70000000 {
+        compatible = "nvidia,tegra20-pinmux";
+        reg = <0x70000014 0x10>, /* Tri-state registers */
+              <0x70000080 0x20>, /* Mux registers */
+              <0x700000a0 0x14>, /* Pull-up/down registers */
+              <0x70000868 0xa8>; /* Pad control registers */
+
+        pinmux {
+            atb {
+                nvidia,pins = "atb", "gma", "gme";
+                nvidia,function = "sdio4";
+                nvidia,pull = <0>;
+                nvidia,tristate = <0>;
+            };
+        };
+    };
+...

Documentation/devicetree/bindings/pinctrl/nvidia,tegra210-pinmux.txt

···
-NVIDIA Tegra210 pinmux controller
-
-Required properties:
-- compatible: "nvidia,tegra210-pinmux"
-- reg: Should contain a list of base address and size pairs for:
-  - first entry: The APB_MISC_GP_*_PADCTRL registers (pad control)
-  - second entry: The PINMUX_AUX_* registers (pinmux)
-
-Please refer to pinctrl-bindings.txt in this directory for details of the
-common pinctrl bindings used by client devices, including the meaning of the
-phrase "pin configuration node".
-
-Tegra's pin configuration nodes act as a container for an arbitrary number of
-subnodes. Each of these subnodes represents some desired configuration for a
-pin, a group, or a list of pins or groups. This configuration can include the
-mux function to select on those pin(s)/group(s), and various pin configuration
-parameters, such as pull-up, tristate, drive strength, etc.
-
-The name of each subnode is not important; all subnodes should be enumerated
-and processed purely based on their content.
-
-Each subnode only affects those parameters that are explicitly listed. In
-other words, a subnode that lists a mux function but no pin configuration
-parameters implies no information about any pin configuration parameters.
-Similarly, a pin subnode that describes a pullup parameter implies no
-information about e.g. the mux function or tristate parameter. For this
-reason, even seemingly boolean values are actually tristates in this binding:
-unspecified, off, or on. Unspecified is represented as an absent property,
-and off/on are represented as integer values 0 and 1.
-
-See the TRM to determine which properties and values apply to each pin/group.
-Macro values for property values are defined in
-include/dt-binding/pinctrl/pinctrl-tegra.h.
-
-Required subnode-properties:
-- nvidia,pins : An array of strings. Each string contains the name of a pin or
-    group. Valid values for these names are listed below.
-
-Optional subnode-properties:
-- nvidia,function: A string containing the name of the function to mux to the
-    pin or group.
-- nvidia,pull: Integer, representing the pull-down/up to apply to the pin.
-    0: none, 1: down, 2: up.
-- nvidia,tristate: Integer.
-    0: drive, 1: tristate.
-- nvidia,enable-input: Integer. Enable the pin's input path.
-    enable :TEGRA_PIN_ENABLE and
-    disable or output only: TEGRA_PIN_DISABLE.
-- nvidia,open-drain: Integer.
-    enable: TEGRA_PIN_ENABLE.
-    disable: TEGRA_PIN_DISABLE.
-- nvidia,lock: Integer. Lock the pin configuration against further changes
-    until reset.
-    enable: TEGRA_PIN_ENABLE.
-    disable: TEGRA_PIN_DISABLE.
-- nvidia,io-hv: Integer. Select high-voltage receivers.
-    normal: TEGRA_PIN_DISABLE
-    high: TEGRA_PIN_ENABLE
-- nvidia,high-speed-mode: Integer. Enable high speed mode the pins.
-    normal: TEGRA_PIN_DISABLE
-    high: TEGRA_PIN_ENABLE
-- nvidia,schmitt: Integer. Enables Schmitt Trigger on the input.
-    normal: TEGRA_PIN_DISABLE
-    high: TEGRA_PIN_ENABLE
-- nvidia,drive-type: Integer. Valid range 0...3.
-- nvidia,pull-down-strength: Integer. Controls drive strength. 0 is weakest.
-    The range of valid values depends on the pingroup. See "CAL_DRVDN" in the
-    Tegra TRM.
-- nvidia,pull-up-strength: Integer. Controls drive strength. 0 is weakest.
-    The range of valid values depends on the pingroup. See "CAL_DRVUP" in the
-    Tegra TRM.
-- nvidia,slew-rate-rising: Integer. Controls rising signal slew rate. 0 is
-    fastest. The range of valid values depends on the pingroup. See
-    "DRVDN_SLWR" in the Tegra TRM.
-- nvidia,slew-rate-falling: Integer. Controls falling signal slew rate. 0 is
-    fastest. The range of valid values depends on the pingroup. See
-    "DRVUP_SLWF" in the Tegra TRM.
-
-Valid values for pin and group names (nvidia,pin) are:
-
-  Mux groups:
-
-    These correspond to Tegra PINMUX_AUX_* (pinmux) registers. Any property
-    that exists in those registers may be set for the following pin names.
-
-    In Tegra210, many pins also have a dedicated APB_MISC_GP_*_PADCTRL
-    register. Where that is true, and property that exists in that register
-    may also be set on the following pin names.
-
-    als_prox_int_px3, ap_ready_pv5, ap_wake_bt_ph3, ap_wake_nfc_ph7,
-    aud_mclk_pbb0, batt_bcl, bt_rst_ph4, bt_wake_ap_ph5, button_home_py1,
-    button_power_on_px5, button_slide_sw_py0, button_vol_down_px7,
-    button_vol_up_px6, cam1_mclk_ps0, cam1_pwdn_ps7, cam1_strobe_pt1,
-    cam2_mclk_ps1, cam2_pwdn_pt0, cam_af_en_ps5, cam_flash_en_ps6,
-    cam_i2c_scl_ps2, cam_i2c_sda_ps3, cam_rst_ps4cam_rst_ps4, clk_32k_in,
-    clk_32k_out_py5, clk_req, core_pwr_req, cpu_pwr_req, dap1_din_pb1,
-    dap1_dout_pb2, dap1_fs_pb0, dap1_sclk_pb3, dap2_din_paa2, dap2_dout_paa3,
-    dap2_fs_paa0, dap2_sclk_paa1, dap4_din_pj5, dap4_dout_pj6, dap4_fs_pj4,
-    dap4_sclk_pj7, dmic1_clk_pe0, dmic1_dat_pe1, dmic2_clk_pe2, dmic2_dat_pe3,
-    dmic3_clk_pe4, dmic3_dat_pe5, dp_hpd0_pcc6, dvfs_clk_pbb2, dvfs_pwm_pbb1,
-    gen1_i2c_scl_pj1, gen1_i2c_sda_pj0, gen2_i2c_scl_pj2, gen2_i2c_sda_pj3,
-    gen3_i2c_scl_pf0, gen3_i2c_sda_pf1, gpio_x1_aud_pbb3, gpio_x3_aud_pbb4,
-    gps_en_pi2, gps_rst_pi3, hdmi_cec_pcc0, hdmi_int_dp_hpd_pcc1, jtag_rtck,
-    lcd_bl_en_pv1, lcd_bl_pwm_pv0, lcd_gpio1_pv3, lcd_gpio2_pv4, lcd_rst_pv2,
-    lcd_te_py2, modem_wake_ap_px0, motion_int_px2, nfc_en_pi0, nfc_int_pi1,
-    pa6, pcc7, pe6, pe7, pex_l0_clkreq_n_pa1, pex_l0_rst_n_pa0,
-    pex_l1_clkreq_n_pa4, pex_l1_rst_n_pa3, pex_wake_n_pa2, ph6, pk0, pk1, pk2,
-    pk3, pk4, pk5, pk6, pk7, pl0, pl1, pwr_i2c_scl_py3, pwr_i2c_sda_py4,
-    pwr_int_n, pz0, pz1, pz2, pz3, pz4, pz5, qspi_cs_n_pee1, qspi_io0_pee2,
-    qspi_io1_pee3, qspi_io2_pee4, qspi_io3_pee5, qspi_sck_pee0,
-    sata_led_active_pa5, sdmmc1_clk_pm0, sdmmc1_cmd_pm1, sdmmc1_dat0_pm5,
-    sdmmc1_dat1_pm4, sdmmc1_dat2_pm3, sdmmc1_dat3_pm2, sdmmc3_clk_pp0,
-    sdmmc3_cmd_pp1, sdmmc3_dat0_pp5, sdmmc3_dat1_pp4, sdmmc3_dat2_pp3,
-    sdmmc3_dat3_pp2, shutdown, spdif_in_pcc3, spdif_out_pcc2, spi1_cs0_pc3,
-    spi1_cs1_pc4, spi1_miso_pc1, spi1_mosi_pc0, spi1_sck_pc2, spi2_cs0_pb7,
-    spi2_cs1_pdd0, spi2_miso_pb5, spi2_mosi_pb4, spi2_sck_pb6, spi4_cs0_pc6,
-    spi4_miso_pd0, spi4_mosi_pc7, spi4_sck_pc5, temp_alert_px4, touch_clk_pv7,
-    touch_int_px1, touch_rst_pv6, uart1_cts_pu3, uart1_rts_pu2, uart1_rx_pu1,
-    uart1_tx_pu0, uart2_cts_pg3, uart2_rts_pg2, uart2_rx_pg1, uart2_tx_pg0,
-    uart3_cts_pd4, uart3_rts_pd3, uart3_rx_pd2, uart3_tx_pd1, uart4_cts_pi7,
-    uart4_rts_pi6, uart4_rx_pi5, uart4_tx_pi4, usb_vbus_en0_pcc4,
-    usb_vbus_en1_pcc5, wifi_en_ph0, wifi_rst_ph1, wifi_wake_ap_ph2
-
-  Drive groups:
-
-    These correspond to the Tegra APB_MISC_GP_*_PADCTRL (pad control)
-    registers. Note that where one of these registers controls a single pin
-    for which a PINMUX_AUX_* exists, see the list above for the pin name to
-    use when configuring the pinmux.
-
-    pa6, pcc7, pe6, pe7, ph6, pk0, pk1, pk2, pk3, pk4, pk5, pk6, pk7, pl0, pl1,
-    pz0, pz1, pz2, pz3, pz4, pz5, sdmmc1, sdmmc2, sdmmc3, sdmmc4
-
-Valid values for nvidia,functions are:
-
-    aud, bcl, blink, ccla, cec, cldvfs, clk, core, cpu, displaya, displayb,
-    dmic1, dmic2, dmic3, dp, dtv, extperiph3, i2c1, i2c2, i2c3, i2cpmu, i2cvi,
-    i2s1, i2s2, i2s3, i2s4a, i2s4b, i2s5a, i2s5b, iqc0, iqc1, jtag, pe, pe0,
-    pe1, pmi, pwm0, pwm1, pwm2, pwm3, qspi, rsvd0, rsvd1, rsvd2, rsvd3, sata,
-    sdmmc1, sdmmc3, shutdown, soc, sor0, sor1, spdif, spi1, spi2, spi3, spi4,
-    sys, touch, uart, uarta, uartb, uartc, uartd, usb, vgp1, vgp2, vgp3, vgp4,
-    vgp5, vgp6, vimclk, vimclk2
-
-Example:
-
-	pinmux: pinmux@70000800 {
-		compatible = "nvidia,tegra210-pinmux";
-		reg = <0x0 0x700008d4 0x0 0x2a8>, /* Pad control registers */
-		      <0x0 0x70003000 0x0 0x1000>; /* Mux registers */
-
-		pinctrl-names = "boot";
-		pinctrl-0 = <&state_boot>;
-
-		state_boot: pinmux {
-			gen1_i2c_scl_pj1 {
-				nvidia,pins = "gen1_i2c_scl_pj1",
-				nvidia,function = "i2c1";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
-				nvidia,io-hv = <TEGRA_PIN_ENABLE>;
-			};
-		};
-	};
-};

Documentation/devicetree/bindings/pinctrl/nvidia,tegra210-pinmux.yaml

···
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/nvidia,tegra210-pinmux.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra210 Pinmux Controller
+
+maintainers:
+  - Thierry Reding <[e-mail]>
+  - Jon Hunter <[e-mail]>
+
+properties:
+  compatible:
+    const: nvidia,tegra210-pinmux
+
+  reg:
+    items:
+      - description: APB_MISC_GP_*_PADCTRL register (pad control)
+      - description: PINMUX_AUX_* registers (pinmux)
+
+patternProperties:
+  "^pinmux(-[a-z0-9-_]+)?$":
+    type: object
+    properties:
+      phandle: true
+
+    # pin groups
+    additionalProperties:
+      $ref: nvidia,tegra-pinmux-common.yaml
+      additionalProperties: false
+      properties:
+        nvidia,pins:
+          items:
+            enum: [ als_prox_int_px3, ap_ready_pv5, ap_wake_bt_ph3,
+                    ap_wake_nfc_ph7, aud_mclk_pbb0, batt_bcl, bt_rst_ph4,
+                    bt_wake_ap_ph5, button_home_py1, button_power_on_px5,
+                    button_slide_sw_py0, button_vol_down_px7,
+                    button_vol_up_px6, cam1_mclk_ps0, cam1_pwdn_ps7,
+                    cam1_strobe_pt1, cam2_mclk_ps1, cam2_pwdn_pt0,
+                    cam_af_en_ps5, cam_flash_en_ps6, cam_i2c_scl_ps2,
+                    cam_i2c_sda_ps3, cam_rst_ps4, clk_32k_in, clk_32k_out_py5,
+                    clk_req, core_pwr_req, cpu_pwr_req, dap1_din_pb1,
+                    dap1_dout_pb2, dap1_fs_pb0, dap1_sclk_pb3, dap2_din_paa2,
+                    dap2_dout_paa3, dap2_fs_paa0, dap2_sclk_paa1, dap4_din_pj5,
+                    dap4_dout_pj6, dap4_fs_pj4, dap4_sclk_pj7, dmic1_clk_pe0,
+                    dmic1_dat_pe1, dmic2_clk_pe2, dmic2_dat_pe3, dmic3_clk_pe4,
+                    dmic3_dat_pe5, dp_hpd0_pcc6, dvfs_clk_pbb2, dvfs_pwm_pbb1,
+                    gen1_i2c_scl_pj1, gen1_i2c_sda_pj0, gen2_i2c_scl_pj2,
+                    gen2_i2c_sda_pj3, gen3_i2c_scl_pf0, gen3_i2c_sda_pf1,
+                    gpio_x1_aud_pbb3, gpio_x3_aud_pbb4, gps_en_pi2,
+                    gps_rst_pi3, hdmi_cec_pcc0, hdmi_int_dp_hpd_pcc1,
+                    jtag_rtck, lcd_bl_en_pv1, lcd_bl_pwm_pv0, lcd_gpio1_pv3,
+                    lcd_gpio2_pv4, lcd_rst_pv2, lcd_te_py2, modem_wake_ap_px0,
+                    motion_int_px2, nfc_en_pi0, nfc_int_pi1, pa6, pcc7, pe6,
+                    pe7, pex_l0_clkreq_n_pa1, pex_l0_rst_n_pa0,
+                    pex_l1_clkreq_n_pa4, pex_l1_rst_n_pa3, pex_wake_n_pa2, ph6,
+                    pk0, pk1, pk2, pk3, pk4, pk5, pk6, pk7, pl0, pl1,
+                    pwr_i2c_scl_py3, pwr_i2c_sda_py4, pwr_int_n, pz0, pz1, pz2,
+                    pz3, pz4, pz5, qspi_cs_n_pee1, qspi_io0_pee2,
+                    qspi_io1_pee3, qspi_io2_pee4, qspi_io3_pee5, qspi_sck_pee0,
+                    sata_led_active_pa5, sdmmc1_clk_pm0, sdmmc1_cmd_pm1,
+                    sdmmc1_dat0_pm5, sdmmc1_dat1_pm4, sdmmc1_dat2_pm3,
+                    sdmmc1_dat3_pm2, sdmmc3_clk_pp0, sdmmc3_cmd_pp1,
+                    sdmmc3_dat0_pp5, sdmmc3_dat1_pp4, sdmmc3_dat2_pp3,
+                    sdmmc3_dat3_pp2, shutdown, spdif_in_pcc3, spdif_out_pcc2,
+                    spi1_cs0_pc3, spi1_cs1_pc4, spi1_miso_pc1, spi1_mosi_pc0,
+                    spi1_sck_pc2, spi2_cs0_pb7, spi2_cs1_pdd0, spi2_miso_pb5,
+                    spi2_mosi_pb4, spi2_sck_pb6, spi4_cs0_pc6, spi4_miso_pd0,
+                    spi4_mosi_pc7, spi4_sck_pc5, temp_alert_px4, touch_clk_pv7,
+                    touch_int_px1, touch_rst_pv6, uart1_cts_pu3, uart1_rts_pu2,
+                    uart1_rx_pu1, uart1_tx_pu0, uart2_cts_pg3, uart2_rts_pg2,
+                    uart2_rx_pg1, uart2_tx_pg0, uart3_cts_pd4, uart3_rts_pd3,
+                    uart3_rx_pd2, uart3_tx_pd1, uart4_cts_pi7, uart4_rts_pi6,
+                    uart4_rx_pi5, uart4_tx_pi4, usb_vbus_en0_pcc4,
+                    usb_vbus_en1_pcc5, wifi_en_ph0, wifi_rst_ph1,
+                    wifi_wake_ap_ph2,
+                    # drive groups
+                    drive_pa6, drive_pcc7, drive_pe6, drive_pe7, drive_ph6,
+                    drive_pk0, drive_pk1, drive_pk2, drive_pk3, drive_pk4,
+                    drive_pk5, drive_pk6, drive_pk7, drive_pl0, drive_pl1,
+                    drive_pz0, drive_pz1, drive_pz2, drive_pz3, drive_pz4,
+                    drive_pz5, drive_sdmmc1, drive_sdmmc2, drive_sdmmc3,
+                    drive_sdmmc4 ]
+
+        nvidia,function:
+          enum: [ aud, bcl, blink, ccla, cec, cldvfs, clk, core, cpu, displaya,
+                  displayb, dmic1, dmic2, dmic3, dp, dtv, extperiph3, i2c1,
+                  i2c2, i2c3, i2cpmu, i2cvi, i2s1, i2s2, i2s3, i2s4a, i2s4b,
+                  i2s5a, i2s5b, iqc0, iqc1, jtag, pe, pe0, pe1, pmi, pwm0,
+                  pwm1, pwm2, pwm3, qspi, rsvd0, rsvd1, rsvd2, rsvd3, sata,
+                  sdmmc1, sdmmc3, shutdown, soc, sor0, sor1, spdif, spi1, spi2,
+                  spi3, spi4, sys, touch, uart, uarta, uartb, uartc, uartd,
+                  usb, vgp1, vgp2, vgp3, vgp4, vgp5, vgp6, vimclk, vimclk2 ]
+
+        nvidia,pull: true
+        nvidia,tristate: true
+        nvidia,pull-down-strength: true
+        nvidia,pull-up-strength: true
+        nvidia,high-speed-mode: true
+        nvidia,enable-input: true
+        nvidia,open-drain: true
+        nvidia,lock: true
+        nvidia,drive-type: true
+        nvidia,io-hv: true
+        nvidia,slew-rate-rising: true
+        nvidia,slew-rate-falling: true
+
+      required:
+        - nvidia,pins
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    #include <dt-bindings/pinctrl/pinctrl-tegra.h>
+
+    pinmux: pinmux@70000800 {
+        compatible = "nvidia,tegra210-pinmux";
+        reg = <0x700008d4 0x02a8>, /* Pad control registers */
+              <0x70003000 0x1000>; /* Mux registers */
+
+        pinctrl-names = "boot";
+        pinctrl-0 = <&state_boot>;
+
+        state_boot: pinmux {
+            gen1_i2c_scl_pj1 {
+                nvidia,pins = "gen1_i2c_scl_pj1";
+                nvidia,function = "i2c1";
+                nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+                nvidia,tristate = <TEGRA_PIN_DISABLE>;
+                nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+                nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+                nvidia,io-hv = <TEGRA_PIN_ENABLE>;
+            };
+        };
+    };
+...

Documentation/devicetree/bindings/pinctrl/nvidia,tegra30-pinmux.txt

···
-NVIDIA Tegra30 pinmux controller
-
-The Tegra30 pinctrl binding is very similar to the Tegra20 pinctrl binding,
-as described in nvidia,tegra20-pinmux.txt. In fact, this document assumes
-that binding as a baseline, and only documents the differences between the
-two bindings.
-
-Required properties:
-- compatible: "nvidia,tegra30-pinmux"
-- reg: Should contain the register physical address and length for each of
-  the pad control and mux registers.
-
-Tegra30 adds the following optional properties for pin configuration subnodes:
-- nvidia,enable-input: Integer. Enable the pin's input path. 0: no, 1: yes.
-- nvidia,open-drain: Integer. Enable open drain mode. 0: no, 1: yes.
-- nvidia,lock: Integer. Lock the pin configuration against further changes
-    until reset. 0: no, 1: yes.
-- nvidia,io-reset: Integer. Reset the IO path. 0: no, 1: yes.
-
-As with Tegra20, see the Tegra TRM for complete details regarding which groups
-support which functionality.
-
-Valid values for pin and group names are:
-
-  per-pin mux groups:
-
-    These all support nvidia,function, nvidia,tristate, nvidia,pull,
-    nvidia,enable-input, nvidia,lock. Some support nvidia,open-drain,
-    nvidia,io-reset.
-
-    clk_32k_out_pa0, uart3_cts_n_pa1, dap2_fs_pa2, dap2_sclk_pa3,
-    dap2_din_pa4, dap2_dout_pa5, sdmmc3_clk_pa6, sdmmc3_cmd_pa7, gmi_a17_pb0,
-    gmi_a18_pb1, lcd_pwr0_pb2, lcd_pclk_pb3, sdmmc3_dat3_pb4, sdmmc3_dat2_pb5,
-    sdmmc3_dat1_pb6, sdmmc3_dat0_pb7, uart3_rts_n_pc0, lcd_pwr1_pc1,
-    uart2_txd_pc2, uart2_rxd_pc3, gen1_i2c_scl_pc4, gen1_i2c_sda_pc5,
-    lcd_pwr2_pc6, gmi_wp_n_pc7, sdmmc3_dat5_pd0, sdmmc3_dat4_pd1, lcd_dc1_pd2,
-    sdmmc3_dat6_pd3, sdmmc3_dat7_pd4, vi_d1_pd5, vi_vsync_pd6, vi_hsync_pd7,
-    lcd_d0_pe0, lcd_d1_pe1, lcd_d2_pe2, lcd_d3_pe3, lcd_d4_pe4, lcd_d5_pe5,
-    lcd_d6_pe6, lcd_d7_pe7, lcd_d8_pf0, lcd_d9_pf1, lcd_d10_pf2, lcd_d11_pf3,
-    lcd_d12_pf4, lcd_d13_pf5, lcd_d14_pf6, lcd_d15_pf7, gmi_ad0_pg0,
-    gmi_ad1_pg1, gmi_ad2_pg2, gmi_ad3_pg3, gmi_ad4_pg4, gmi_ad5_pg5,
-    gmi_ad6_pg6, gmi_ad7_pg7, gmi_ad8_ph0, gmi_ad9_ph1, gmi_ad10_ph2,
-    gmi_ad11_ph3, gmi_ad12_ph4, gmi_ad13_ph5, gmi_ad14_ph6, gmi_ad15_ph7,
-    gmi_wr_n_pi0, gmi_oe_n_pi1, gmi_dqs_pi2, gmi_cs6_n_pi3, gmi_rst_n_pi4,
-    gmi_iordy_pi5, gmi_cs7_n_pi6, gmi_wait_pi7, gmi_cs0_n_pj0, lcd_de_pj1,
-    gmi_cs1_n_pj2, lcd_hsync_pj3, lcd_vsync_pj4, uart2_cts_n_pj5,
-    uart2_rts_n_pj6, gmi_a16_pj7, gmi_adv_n_pk0, gmi_clk_pk1, gmi_cs4_n_pk2,
-    gmi_cs2_n_pk3, gmi_cs3_n_pk4, spdif_out_pk5, spdif_in_pk6, gmi_a19_pk7,
-    vi_d2_pl0, vi_d3_pl1, vi_d4_pl2, vi_d5_pl3, vi_d6_pl4, vi_d7_pl5,
-    vi_d8_pl6, vi_d9_pl7, lcd_d16_pm0, lcd_d17_pm1, lcd_d18_pm2, lcd_d19_pm3,
-    lcd_d20_pm4, lcd_d21_pm5, lcd_d22_pm6, lcd_d23_pm7, dap1_fs_pn0,
-    dap1_din_pn1, dap1_dout_pn2, dap1_sclk_pn3, lcd_cs0_n_pn4, lcd_sdout_pn5,
-    lcd_dc0_pn6, hdmi_int_pn7, ulpi_data7_po0, ulpi_data0_po1, ulpi_data1_po2,
-    ulpi_data2_po3, ulpi_data3_po4, ulpi_data4_po5, ulpi_data5_po6,
-    ulpi_data6_po7, dap3_fs_pp0, dap3_din_pp1, dap3_dout_pp2, dap3_sclk_pp3,
-    dap4_fs_pp4, dap4_din_pp5, dap4_dout_pp6, dap4_sclk_pp7, kb_col0_pq0,
-    kb_col1_pq1, kb_col2_pq2, kb_col3_pq3, kb_col4_pq4, kb_col5_pq5,
-    kb_col6_pq6, kb_col7_pq7, kb_row0_pr0, kb_row1_pr1, kb_row2_pr2,
-    kb_row3_pr3, kb_row4_pr4, kb_row5_pr5, kb_row6_pr6, kb_row7_pr7,
-    kb_row8_ps0, kb_row9_ps1, kb_row10_ps2, kb_row11_ps3, kb_row12_ps4,
-    kb_row13_ps5, kb_row14_ps6, kb_row15_ps7, vi_pclk_pt0, vi_mclk_pt1,
-    vi_d10_pt2, vi_d11_pt3, vi_d0_pt4, gen2_i2c_scl_pt5, gen2_i2c_sda_pt6,
-    sdmmc4_cmd_pt7, pu0, pu1, pu2, pu3, pu4, pu5, pu6, jtag_rtck_pu7, pv0,
-    pv1, pv2, pv3, ddc_scl_pv4, ddc_sda_pv5, crt_hsync_pv6, crt_vsync_pv7,
-    lcd_cs1_n_pw0, lcd_m1_pw1, spi2_cs1_n_pw2, spi2_cs2_n_pw3, clk1_out_pw4,
-    clk2_out_pw5, uart3_txd_pw6, uart3_rxd_pw7, spi2_mosi_px0, spi2_miso_px1,
-    spi2_sck_px2, spi2_cs0_n_px3, spi1_mosi_px4, spi1_sck_px5, spi1_cs0_n_px6,
-    spi1_miso_px7, ulpi_clk_py0, ulpi_dir_py1, ulpi_nxt_py2, ulpi_stp_py3,
-    sdmmc1_dat3_py4, sdmmc1_dat2_py5, sdmmc1_dat1_py6, sdmmc1_dat0_py7,
-    sdmmc1_clk_pz0, sdmmc1_cmd_pz1, lcd_sdin_pz2, lcd_wr_n_pz3, lcd_sck_pz4,
-    sys_clk_req_pz5, pwr_i2c_scl_pz6, pwr_i2c_sda_pz7, sdmmc4_dat0_paa0,
-    sdmmc4_dat1_paa1, sdmmc4_dat2_paa2, sdmmc4_dat3_paa3, sdmmc4_dat4_paa4,
-    sdmmc4_dat5_paa5, sdmmc4_dat6_paa6, sdmmc4_dat7_paa7, pbb0,
-    cam_i2c_scl_pbb1, cam_i2c_sda_pbb2, pbb3, pbb4, pbb5, pbb6, pbb7,
-    cam_mclk_pcc0, pcc1, pcc2, sdmmc4_rst_n_pcc3, sdmmc4_clk_pcc4,
-    clk2_req_pcc5, pex_l2_rst_n_pcc6, pex_l2_clkreq_n_pcc7,
-    pex_l0_prsnt_n_pdd0, pex_l0_rst_n_pdd1, pex_l0_clkreq_n_pdd2,
-    pex_wake_n_pdd3, pex_l1_prsnt_n_pdd4, pex_l1_rst_n_pdd5,
-    pex_l1_clkreq_n_pdd6, pex_l2_prsnt_n_pdd7, clk3_out_pee0, clk3_req_pee1,
-    clk1_req_pee2, hdmi_cec_pee3, clk_32k_in, core_pwr_req, cpu_pwr_req, owr,
-    pwr_int_n.
-
-  drive groups:
-
-    These all support nvidia,pull-down-strength, nvidia,pull-up-strength,
-    nvidia,slew-rate-rising, nvidia,slew-rate-falling. Most but not all
-    support nvidia,high-speed-mode, nvidia,schmitt, nvidia,low-power-mode.
-
-    ao1, ao2, at1, at2, at3, at4, at5, cdev1, cdev2, cec, crt, csus, dap1,
-    dap2, dap3, dap4, dbg, ddc, dev3, gma, gmb, gmc, gmd, gme, gmf, gmg,
-    gmh, gpv, lcd1, lcd2, owr, sdio1, sdio2, sdio3, spi, uaa, uab, uart2,
-    uart3, uda, vi1.
-
-Valid values for nvidia,functions are:
-
-  blink, cec, clk_12m_out, clk_32k_in, core_pwr_req, cpu_pwr_req, crt,
-  dap, ddr, dev3, displaya, displayb, dtv, extperiph1, extperiph2,
-  extperiph3, gmi, gmi_alt, hda, hdcp, hdmi, hsi, i2c1, i2c2, i2c3,
-  i2c4, i2cpwr, i2s0, i2s1, i2s2, i2s3, i2s4, invalid, kbc, mio, nand,
-  nand_alt, owr, pcie, pwm0, pwm1, pwm2, pwm3, pwr_int_n, rsvd1, rsvd2,
-  rsvd3, rsvd4, rtck, sata, sdmmc1, sdmmc2, sdmmc3, sdmmc4, spdif, spi1,
-  spi2, spi2_alt, spi3, spi4, spi5, spi6, sysclk, test, trace, uarta,
-  uartb, uartc, uartd, uarte, ulpi, vgp1, vgp2, vgp3, vgp4, vgp5, vgp6,
-  vi, vi_alt1, vi_alt2, vi_alt3
-
-Example:
-
-	pinctrl@70000000 {
-		compatible = "nvidia,tegra30-pinmux";
-		reg = < 0x70000868 0xd0     /* Pad control registers */
-			0x70003000 0x3e0 >; /* Mux registers */
-	};
-
-Example board file extract:
-
-	pinctrl@70000000 {
-		sdmmc4_default: pinmux {
-			sdmmc4_clk_pcc4 {
-				nvidia,pins =	"sdmmc4_clk_pcc4",
-						"sdmmc4_rst_n_pcc3";
-				nvidia,function = "sdmmc4";
-				nvidia,pull = <0>;
-				nvidia,tristate = <0>;
-			};
-			sdmmc4_dat0_paa0 {
-				nvidia,pins =	"sdmmc4_dat0_paa0",
-						"sdmmc4_dat1_paa1",
-						"sdmmc4_dat2_paa2",
-						"sdmmc4_dat3_paa3",
-						"sdmmc4_dat4_paa4",
-						"sdmmc4_dat5_paa5",
-						"sdmmc4_dat6_paa6",
-						"sdmmc4_dat7_paa7";
-				nvidia,function = "sdmmc4";
-				nvidia,pull = <2>;
-				nvidia,tristate = <0>;
-			};
-		};
-	};
-
-	sdhci@78000400 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&sdmmc4_default>;
-	};

Documentation/devicetree/bindings/pinctrl/nvidia,tegra30-pinmux.yaml

···
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/nvidia,tegra30-pinmux.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra30 pinmux Controller
+
+maintainers:
+  - Thierry Reding <[e-mail]>
+  - Jon Hunter <[e-mail]>
+
+properties:
+  compatible:
+    const: nvidia,tegra30-pinmux
+
+  reg:
+    items:
+      - description: pad control registers
+      - description: mux registers
+
+patternProperties:
+  "^pinmux(-[a-z0-9-_]+)?$":
+    type: object
+    properties:
+      phandle: true
+
+    # pin groups
+    additionalProperties:
+      $ref: nvidia,tegra-pinmux-common.yaml
+      additionalProperties: false
+      properties:
+        nvidia,pins:
+          items:
+            enum: [ clk_32k_out_pa0, uart3_cts_n_pa1, dap2_fs_pa2,
+                    dap2_sclk_pa3, dap2_din_pa4, dap2_dout_pa5, sdmmc3_clk_pa6,
+                    sdmmc3_cmd_pa7, gmi_a17_pb0, gmi_a18_pb1, lcd_pwr0_pb2,
+                    lcd_pclk_pb3, sdmmc3_dat3_pb4, sdmmc3_dat2_pb5,
+                    sdmmc3_dat1_pb6, sdmmc3_dat0_pb7, uart3_rts_n_pc0,
+                    lcd_pwr1_pc1, uart2_txd_pc2, uart2_rxd_pc3,
+                    gen1_i2c_scl_pc4, gen1_i2c_sda_pc5, lcd_pwr2_pc6,
+                    gmi_wp_n_pc7, sdmmc3_dat5_pd0, sdmmc3_dat4_pd1,
+                    lcd_dc1_pd2, sdmmc3_dat6_pd3, sdmmc3_dat7_pd4, vi_d1_pd5,
+                    vi_vsync_pd6, vi_hsync_pd7, lcd_d0_pe0, lcd_d1_pe1,
+                    lcd_d2_pe2, lcd_d3_pe3, lcd_d4_pe4, lcd_d5_pe5, lcd_d6_pe6,
+                    lcd_d7_pe7, lcd_d8_pf0, lcd_d9_pf1, lcd_d10_pf2,
+                    lcd_d11_pf3, lcd_d12_pf4, lcd_d13_pf5, lcd_d14_pf6,
+                    lcd_d15_pf7, gmi_ad0_pg0, gmi_ad1_pg1, gmi_ad2_pg2,
+                    gmi_ad3_pg3, gmi_ad4_pg4, gmi_ad5_pg5, gmi_ad6_pg6,
+                    gmi_ad7_pg7, gmi_ad8_ph0, gmi_ad9_ph1, gmi_ad10_ph2,
+                    gmi_ad11_ph3, gmi_ad12_ph4, gmi_ad13_ph5, gmi_ad14_ph6,
+                    gmi_ad15_ph7, gmi_wr_n_pi0, gmi_oe_n_pi1, gmi_dqs_pi2,
+                    gmi_cs6_n_pi3, gmi_rst_n_pi4, gmi_iordy_pi5, gmi_cs7_n_pi6,
+                    gmi_wait_pi7, gmi_cs0_n_pj0, lcd_de_pj1, gmi_cs1_n_pj2,
+                    lcd_hsync_pj3, lcd_vsync_pj4, uart2_cts_n_pj5,
+                    uart2_rts_n_pj6, gmi_a16_pj7, gmi_adv_n_pk0, gmi_clk_pk1,
+                    gmi_cs4_n_pk2, gmi_cs2_n_pk3, gmi_cs3_n_pk4, spdif_out_pk5,
+                    spdif_in_pk6, gmi_a19_pk7, vi_d2_pl0, vi_d3_pl1, vi_d4_pl2,
+                    vi_d5_pl3, vi_d6_pl4, vi_d7_pl5, vi_d8_pl6, vi_d9_pl7,
+                    lcd_d16_pm0, lcd_d17_pm1, lcd_d18_pm2, lcd_d19_pm3,
+                    lcd_d20_pm4, lcd_d21_pm5, lcd_d22_pm6, lcd_d23_pm7,
+                    dap1_fs_pn0, dap1_din_pn1, dap1_dout_pn2, dap1_sclk_pn3,
+                    lcd_cs0_n_pn4, lcd_sdout_pn5, lcd_dc0_pn6, hdmi_int_pn7,
+                    ulpi_data7_po0, ulpi_data0_po1, ulpi_data1_po2,
+                    ulpi_data2_po3, ulpi_data3_po4, ulpi_data4_po5,
+                    ulpi_data5_po6, ulpi_data6_po7, dap3_fs_pp0, dap3_din_pp1,
+                    dap3_dout_pp2, dap3_sclk_pp3, dap4_fs_pp4, dap4_din_pp5,
+                    dap4_dout_pp6, dap4_sclk_pp7, kb_col0_pq0, kb_col1_pq1,
+                    kb_col2_pq2, kb_col3_pq3, kb_col4_pq4, kb_col5_pq5,
+                    kb_col6_pq6, kb_col7_pq7, kb_row0_pr0, kb_row1_pr1,
+                    kb_row2_pr2, kb_row3_pr3, kb_row4_pr4, kb_row5_pr5,
+                    kb_row6_pr6, kb_row7_pr7, kb_row8_ps0, kb_row9_ps1,
+                    kb_row10_ps2, kb_row11_ps3, kb_row12_ps4, kb_row13_ps5,
+                    kb_row14_ps6, kb_row15_ps7, vi_pclk_pt0, vi_mclk_pt1,
+                    vi_d10_pt2, vi_d11_pt3, vi_d0_pt4, gen2_i2c_scl_pt5,
+                    gen2_i2c_sda_pt6, sdmmc4_cmd_pt7, pu0, pu1, pu2, pu3, pu4,
+                    pu5, pu6, jtag_rtck_pu7, pv0, pv1, pv2, pv3, ddc_scl_pv4,
+                    ddc_sda_pv5, crt_hsync_pv6, crt_vsync_pv7, lcd_cs1_n_pw0,
+                    lcd_m1_pw1, spi2_cs1_n_pw2, spi2_cs2_n_pw3, clk1_out_pw4,
+                    clk2_out_pw5, uart3_txd_pw6, uart3_rxd_pw7, spi2_mosi_px0,
+                    spi2_miso_px1, spi2_sck_px2, spi2_cs0_n_px3, spi1_mosi_px4,
+                    spi1_sck_px5, spi1_cs0_n_px6, spi1_miso_px7, ulpi_clk_py0,
+                    ulpi_dir_py1, ulpi_nxt_py2, ulpi_stp_py3, sdmmc1_dat3_py4,
+                    sdmmc1_dat2_py5, sdmmc1_dat1_py6, sdmmc1_dat0_py7,
+                    sdmmc1_clk_pz0, sdmmc1_cmd_pz1, lcd_sdin_pz2, lcd_wr_n_pz3,
+                    lcd_sck_pz4, sys_clk_req_pz5, pwr_i2c_scl_pz6,
+                    pwr_i2c_sda_pz7, sdmmc4_dat0_paa0, sdmmc4_dat1_paa1,
+                    sdmmc4_dat2_paa2, sdmmc4_dat3_paa3, sdmmc4_dat4_paa4,
+                    sdmmc4_dat5_paa5, sdmmc4_dat6_paa6, sdmmc4_dat7_paa7, pbb0,
+                    cam_i2c_scl_pbb1, cam_i2c_sda_pbb2, pbb3, pbb4, pbb5, pbb6,
+                    pbb7, cam_mclk_pcc0, pcc1, pcc2, sdmmc4_rst_n_pcc3,
+                    sdmmc4_clk_pcc4, clk2_req_pcc5, pex_l2_rst_n_pcc6,
+                    pex_l2_clkreq_n_pcc7, pex_l0_prsnt_n_pdd0,
+                    pex_l0_rst_n_pdd1, pex_l0_clkreq_n_pdd2, pex_wake_n_pdd3,
+                    pex_l1_prsnt_n_pdd4, pex_l1_rst_n_pdd5,
+                    pex_l1_clkreq_n_pdd6, pex_l2_prsnt_n_pdd7, clk3_out_pee0,
+                    clk3_req_pee1, clk1_req_pee2, hdmi_cec_pee3, clk_32k_in,
+                    core_pwr_req, cpu_pwr_req, owr, pwr_int_n,
+                    # drive groups
+                    drive_ao1, drive_ao2, drive_at1, drive_at2, drive_at3,
+                    drive_at4, drive_at5, drive_cdev1, drive_cdev2, drive_cec,
+                    drive_crt, drive_csus, drive_dap1, drive_dap2, drive_dap3,
+                    drive_dap4, drive_dbg, drive_ddc, drive_dev3, drive_gma,
+                    drive_gmb, drive_gmc, drive_gmd, drive_gme, drive_gmf,
+                    drive_gmg, drive_gmh, drive_gpv, drive_lcd1, drive_lcd2,
+                    drive_owr, drive_sdio1, drive_sdio2, drive_sdio3,
+                    drive_spi, drive_uaa, drive_uab, drive_uart2, drive_uart3,
+                    drive_uda, drive_vi1 ]
+
+        nvidia,function:
+          enum: [ blink, cec, clk_12m_out, clk_32k_in, core_pwr_req,
+                  cpu_pwr_req, crt, dap, ddr, dev3, displaya, displayb, dtv,
+                  extperiph1, extperiph2, extperiph3, gmi, gmi_alt, hda, hdcp,
+                  hdmi, hsi, i2c1, i2c2, i2c3, i2c4, i2cpwr, i2s0, i2s1, i2s2,
+                  i2s3, i2s4, invalid, kbc, mio, nand, nand_alt, owr, pcie,
+                  pwm0, pwm1, pwm2, pwm3, pwr_int_n, rsvd1, rsvd2, rsvd3,
+                  rsvd4, rtck, sata, sdmmc1, sdmmc2, sdmmc3, sdmmc4, spdif,
+                  spi1, spi2, spi2_alt, spi3, spi4, spi5, spi6, sysclk, test,
+                  trace, uarta, uartb, uartc, uartd, uarte, ulpi, vgp1, vgp2,
+                  vgp3, vgp4, vgp5, vgp6, vi, vi_alt1, vi_alt2, vi_alt3 ]
+
+        nvidia,pull: true
+        nvidia,tristate: true
+        nvidia,schmitt: true
+        nvidia,pull-down-strength: true
+        nvidia,pull-up-strength: true
+        nvidia,high-speed-mode: true
+        nvidia,low-power-mode: true
+        nvidia,enable-input: true
+        nvidia,open-drain: true
+        nvidia,lock: true
+        nvidia,io-reset: true
+        nvidia,slew-rate-rising: true
+        nvidia,slew-rate-falling: true
+
+      required:
+        - nvidia,pins
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    pinctrl@70000000 {
+        compatible = "nvidia,tegra30-pinmux";
+        reg = <0x70000868 0x0d0>, /* Pad control registers */
+              <0x70003000 0x3e0>; /* Mux registers */
+
+        pinmux {
+            sdmmc4_clk_pcc4 {
+                nvidia,pins = "sdmmc4_clk_pcc4",
+                              "sdmmc4_rst_n_pcc3";
+                nvidia,function = "sdmmc4";
+                nvidia,pull = <0>;
+                nvidia,tristate = <0>;
+            };
+
+            sdmmc4_dat0_paa0 {
+                nvidia,pins = "sdmmc4_dat0_paa0",
+                              "sdmmc4_dat1_paa1",
+                              "sdmmc4_dat2_paa2",
+                              "sdmmc4_dat3_paa3",
+                              "sdmmc4_dat4_paa4",
+                              "sdmmc4_dat5_paa5",
+                              "sdmmc4_dat6_paa6",
+                              "sdmmc4_dat7_paa7";
+                nvidia,function = "sdmmc4";
+                nvidia,pull = <2>;
+                nvidia,tristate = <0>;
+            };
+        };
+    };
+...

Documentation/devicetree/bindings/pwm/nvidia,tegra20-pwm.txt

···
-Tegra SoC PWFM controller
-
-Required properties:
-- compatible: Must be:
-  - "nvidia,tegra20-pwm": for Tegra20
-  - "nvidia,tegra30-pwm", "nvidia,tegra20-pwm": for Tegra30
-  - "nvidia,tegra114-pwm", "nvidia,tegra20-pwm": for Tegra114
-  - "nvidia,tegra124-pwm", "nvidia,tegra20-pwm": for Tegra124
-  - "nvidia,tegra132-pwm", "nvidia,tegra20-pwm": for Tegra132
-  - "nvidia,tegra210-pwm", "nvidia,tegra20-pwm": for Tegra210
-  - "nvidia,tegra186-pwm": for Tegra186
-  - "nvidia,tegra194-pwm": for Tegra194
-- reg: physical base address and length of the controller's registers
-- #pwm-cells: should be 2. See pwm.yaml in this directory for a description of
-  the cells format.
-- clocks: Must contain one entry, for the module clock.
-  See ../clocks/clock-bindings.txt for details.
-- resets: Must contain an entry for each entry in reset-names.
-  See ../reset/reset.txt for details.
-- reset-names: Must include the following entries:
-  - pwm
-
-Optional properties:
-============================
-In some of the interface like PWM based regulator device, it is required
-to configure the pins differently in different states, especially in suspend
-state of the system. The configuration of pin is provided via the pinctrl
-DT node as detailed in the pinctrl DT binding document
-	Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
-
-The PWM node will have following optional properties.
-pinctrl-names:	Pin state names. Must be "default" and "sleep".
-pinctrl-0:	phandle for the default/active state of pin configurations.
-pinctrl-1:	phandle for the sleep state of pin configurations.
-
-Example:
-
-	pwm: pwm@7000a000 {
-		compatible = "nvidia,tegra20-pwm";
-		reg = <0x7000a000 0x100>;
-		#pwm-cells = <2>;
-		clocks = <&tegra_car 17>;
-		resets = <&tegra_car 17>;
-		reset-names = "pwm";
-	};
-
-
-Example with the pin configuration for suspend and resume:
-=========================================================
-Suppose pin PE7 (On Tegra210) interfaced with the regulator device and
-it requires PWM output to be tristated when system enters suspend.
-Following will be DT binding to achieve this:
-
-#include <dt-bindings/pinctrl/pinctrl-tegra.h>
-
-	pinmux@700008d4 {
-		pwm_active_state: pwm_active_state {
-                        pe7 {
-                                nvidia,pins = "pe7";
-                                nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-		};
-
-		pwm_sleep_state: pwm_sleep_state {
-                        pe7 {
-                                nvidia,pins = "pe7";
-                                nvidia,tristate = <TEGRA_PIN_ENABLE>;
-			};
-		};
-	};
-
-	pwm@7000a000 {
-		/* Mandatory PWM properties */
-		pinctrl-names = "default", "sleep";
-		pinctrl-0 = <&pwm_active_state>;
-		pinctrl-1 = <&pwm_sleep_state>;
-	};

Documentation/devicetree/bindings/pwm/nvidia,tegra20-pwm.yaml

···
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pwm/nvidia,tegra20-pwm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra PWFM controller
+
+maintainers:
+  - Thierry Reding <[e-mail]>
+  - Jon Hunter <[e-mail]>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - nvidia,tegra20-pwm
+          - nvidia,tegra186-pwm
+
+      - items:
+          - enum:
+              - nvidia,tegra30-pwm
+              - nvidia,tegra114-pwm
+              - nvidia,tegra124-pwm
+              - nvidia,tegra132-pwm
+              - nvidia,tegra210-pwm
+          - enum:
+              - nvidia,tegra20-pwm
+
+      - items:
+          - const: nvidia,tegra194-pwm
+          - const: nvidia,tegra186-pwm
+
+      - items:
+          - const: nvidia,tegra234-pwm
+          - const: nvidia,tegra194-pwm
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    items:
+      - description: module reset
+
+  reset-names:
+    items:
+      - const: pwm
+
+  "#pwm-cells":
+    const: 2
+
+  pinctrl-names:
+    items:
+      - const: default
+      - const: sleep
+
+  pinctrl-0:
+    description: configuration for the default/active state
+
+  pinctrl-1:
+    description: configuration for the sleep state
+
+  operating-points-v2:
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  power-domains:
+    items:
+      - description: phandle to the core power domain
+
+allOf:
+  - $ref: pwm.yaml
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - resets
+  - reset-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra20-car.h>
+
+    pwm: pwm@7000a000 {
+        compatible = "nvidia,tegra20-pwm";
+        reg = <0x7000a000 0x100>;
+        #pwm-cells = <2>;
+        clocks = <&tegra_car TEGRA20_CLK_PWM>;
+        resets = <&tegra_car 17>;
+        reset-names = "pwm";
+    };

Documentation/devicetree/bindings/usb/nvidia,tegra124-xusb.txt

···
-NVIDIA Tegra xHCI controller
-============================
-
-The Tegra xHCI controller supports both USB2 and USB3 interfaces exposed by
-the Tegra XUSB pad controller.
-
-Required properties:
---------------------
-- compatible: Must be:
-  - Tegra124: "nvidia,tegra124-xusb"
-  - Tegra132: "nvidia,tegra132-xusb", "nvidia,tegra124-xusb"
-  - Tegra210: "nvidia,tegra210-xusb"
-  - Tegra186: "nvidia,tegra186-xusb"
-- reg: Must contain the base and length of the xHCI host registers, XUSB FPCI
-  registers and XUSB IPFS registers.
-- reg-names: Must contain the following entries:
-  - "hcd"
-  - "fpci"
-  - "ipfs"
-- interrupts: Must contain the xHCI host interrupt and the mailbox interrupt.
-- clocks: Must contain an entry for each entry in clock-names.
-  See ../clock/clock-bindings.txt for details.
-- clock-names: Must include the following entries:
-   - xusb_host
-   - xusb_host_src
-   - xusb_falcon_src
-   - xusb_ss
-   - xusb_ss_src
-   - xusb_ss_div2
-   - xusb_hs_src
-   - xusb_fs_src
-   - pll_u_480m
-   - clk_m
-   - pll_e
-- resets: Must contain an entry for each entry in reset-names.
-  See ../reset/reset.txt for details.
-- reset-names: Must include the following entries:
-  - xusb_host
-  - xusb_ss
-  - xusb_src
-  Note that xusb_src is the shared reset for xusb_{ss,hs,fs,falcon,host}_src.
-- nvidia,xusb-padctl: phandle to the XUSB pad controller that is used to
-  configure the USB pads used by the XHCI controller
-
-For Tegra124 and Tegra132:
-- avddio-pex-supply: PCIe/USB3 analog logic power supply. Must supply 1.05 V.
-- dvddio-pex-supply: PCIe/USB3 digital logic power supply. Must supply 1.05 V.
-- avdd-usb-supply: USB controller power supply. Must supply 3.3 V.
-- avdd-pll-utmip-supply: UTMI PLL power supply. Must supply 1.8 V.
-- avdd-pll-erefe-supply: PLLE reference PLL power supply. Must supply 1.05 V.
-- avdd-usb-ss-pll-supply: PCIe/USB3 PLL power supply. Must supply 1.05 V.
-- hvdd-usb-ss-supply: High-voltage PCIe/USB3 power supply. Must supply 3.3 V.
-- hvdd-usb-ss-pll-e-supply: High-voltage PLLE power supply. Must supply 3.3 V.
-
-For Tegra210:
-- dvddio-pex-supply: PCIe/USB3 analog logic power supply. Must supply 1.05 V.
-- hvddio-pex-supply: High-voltage PCIe/USB3 power supply. Must supply 1.8 V.
-- avdd-usb-supply: USB controller power supply. Must supply 3.3 V.
-- avdd-pll-utmip-supply: UTMI PLL power supply. Must supply 1.8 V.
-- avdd-pll-uerefe-supply: PLLE reference PLL power supply. Must supply 1.05 V.
-- dvdd-pex-pll-supply: PCIe/USB3 PLL power supply. Must supply 1.05 V.
-- hvdd-pex-pll-e-supply: High-voltage PLLE power supply. Must supply 1.8 V.
-
-For Tegra210 and Tegra186:
-- power-domains: A list of PM domain specifiers that reference each power-domain
-  used by the xHCI controller. This list must comprise of a specifier for the
-  XUSBA and XUSBC power-domains. See ../power/power_domain.txt and
-  ../arm/tegra/nvidia,tegra20-pmc.txt for details.
-- power-domain-names: A list of names that represent each of the specifiers in
-  the 'power-domains' property. Must include 'xusb_ss' and 'xusb_host' which
-  represent the power-domains XUSBA and XUSBC, respectively. See
-  ../power/power_domain.txt for details.
-
-Optional properties:
---------------------
-- phys: Must contain an entry for each entry in phy-names.
-  See ../phy/phy-bindings.txt for details.
-- phy-names: Should include an entry for each PHY used by the controller. The
-  following PHYs are available:
-  - Tegra124: usb2-0, usb2-1, usb2-2, hsic-0, hsic-1, usb3-0, usb3-1
-  - Tegra132: usb2-0, usb2-1, usb2-2, hsic-0, hsic-1, usb3-0, usb3-1
-  - Tegra210: usb2-0, usb2-1, usb2-2, usb2-3, hsic-0, usb3-0, usb3-1, usb3-2,
-              usb3-3
-  - Tegra186: usb2-0, usb2-1, usb2-2, hsic-0, usb3-0, usb3-1, usb3-2
-
-Example:
---------
-
-	usb@0,70090000 {
-		compatible = "nvidia,tegra124-xusb";
-		reg = <0x0 0x70090000 0x0 0x8000>,
-		      <0x0 0x70098000 0x0 0x1000>,
-		      <0x0 0x70099000 0x0 0x1000>;
-		reg-names = "hcd", "fpci", "ipfs";
-
-		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
-
-		clocks = <&tegra_car TEGRA124_CLK_XUSB_HOST>,
-			 <&tegra_car TEGRA124_CLK_XUSB_HOST_SRC>,
-			 <&tegra_car TEGRA124_CLK_XUSB_FALCON_SRC>,
-			 <&tegra_car TEGRA124_CLK_XUSB_SS>,
-			 <&tegra_car TEGRA124_CLK_XUSB_SS_DIV2>,
-			 <&tegra_car TEGRA124_CLK_XUSB_SS_SRC>,
-			 <&tegra_car TEGRA124_CLK_XUSB_HS_SRC>,
-			 <&tegra_car TEGRA124_CLK_XUSB_FS_SRC>,
-			 <&tegra_car TEGRA124_CLK_PLL_U_480M>,
-			 <&tegra_car TEGRA124_CLK_CLK_M>,
-			 <&tegra_car TEGRA124_CLK_PLL_E>;
-		clock-names = "xusb_host", "xusb_host_src", "xusb_falcon_src",
-			      "xusb_ss", "xusb_ss_div2", "xusb_ss_src",
-			      "xusb_hs_src", "xusb_fs_src", "pll_u_480m",
-			      "clk_m", "pll_e";
-		resets = <&tegra_car 89>, <&tegra_car 156>, <&tegra_car 143>;
-		reset-names = "xusb_host", "xusb_ss", "xusb_src";
-
-		nvidia,xusb-padctl = <&padctl>;
-
-		phys = <&{/padctl@0,7009f000/pads/usb2/lanes/usb2-1}>, /* mini-PCIe USB */
-		       <&{/padctl@0,7009f000/pads/usb2/lanes/usb2-2}>, /* USB A */
-		       <&{/padctl@0,7009f000/pads/pcie/lanes/pcie-0}>; /* USB A */
-		phy-names = "usb2-1", "usb2-2", "usb3-0";
-
-		avddio-pex-supply = <&vdd_1v05_run>;
-		dvddio-pex-supply = <&vdd_1v05_run>;
-		avdd-usb-supply = <&vdd_3v3_lp0>;
-		avdd-pll-utmip-supply = <&vddio_1v8>;
-		avdd-pll-erefe-supply = <&avdd_1v05_run>;
-		avdd-usb-ss-pll-supply = <&vdd_1v05_run>;
-		hvdd-usb-ss-supply = <&vdd_3v3_lp0>;
-		hvdd-usb-ss-pll-e-supply = <&vdd_3v3_lp0>;
-	};

Documentation/devicetree/bindings/usb/nvidia,tegra124-xusb.yaml

···
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/nvidia,tegra124-xusb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra124 xHCI controller
+
+maintainers:
+  - Thierry Reding <[e-mail]>
+  - Jon Hunter <[e-mail]>
+
+description: The Tegra xHCI controller supports both USB2 and USB3 interfaces
+  exposed by the Tegra XUSB pad controller.
+
+properties:
+  # required
+  compatible:
+    oneOf:
+      - description: NVIDIA Tegra124
+        const: nvidia,tegra124-xusb
+
+      - description: NVIDIA Tegra132
+        items:
+          - const: nvidia,tegra132-xusb
+          - const: nvidia,tegra124-xusb
+
+  reg:
+    items:
+      - description: base and length of the xHCI host registers
+      - description: base and length of the XUSB FPCI registers
+      - description: base and length of the XUSB IPFS registers
+
+  reg-names:
+    items:
+      - const: hcd
+      - const: fpci
+      - const: ipfs
+
+  interrupts:
+    items:
+      - description: xHCI host interrupt
+      - description: mailbox interrupt
+
+  clocks:
+    items:
+      - description: XUSB host clock
+      - description: XUSB host source clock
+      - description: XUSB Falcon source clock
+      - description: XUSB SuperSpeed clock
+      - description: XUSB SuperSpeed clock divider
+      - description: XUSB SuperSpeed source clock
+      - description: XUSB HighSpeed clock source
+      - description: XUSB FullSpeed clock source
+      - description: USB PLL
+      - description: reference clock
+      - description: I/O PLL
+
+  clock-names:
+    items:
+      - const: xusb_host
+      - const: xusb_host_src
+      - const: xusb_falcon_src
+      - const: xusb_ss
+      - const: xusb_ss_div2
+      - const: xusb_ss_src
+      - const: xusb_hs_src
+      - const: xusb_fs_src
+      - const: pll_u_480m
+      - const: clk_m
+      - const: pll_e
+
+  resets:
+    items:
+      - description: reset for the XUSB host controller
+      - description: reset for the SuperSpeed logic
+      - description: shared reset for xusb_{ss,hs,fs,falcon,host}_src.
+
+  reset-names:
+    items:
+      - const: xusb_host
+      - const: xusb_ss
+      - const: xusb_src
+
+  nvidia,xusb-padctl:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: phandle to the XUSB pad controller that is used to configure
+      the USB pads used by the XHCI controller
+
+  # optional
+  phys:
+    minItems: 1
+    maxItems: 7
+
+  phy-names:
+    minItems: 1
+    maxItems: 7
+    items:
+      enum:
+        - usb2-0
+        - usb2-1
+        - usb2-2
+        - hsic-0
+        - hsic-1
+        - usb3-0
+        - usb3-1
+
+  avddio-pex-supply:
+    description: PCIe/USB3 analog logic power supply. Must supply 1.05 V.
+
+  dvddio-pex-supply:
+    description: PCIe/USB3 digital logic power supply. Must supply 1.05 V.
+
+  avdd-usb-supply:
+    description: USB controller power supply. Must supply 3.3 V.
+
+  avdd-pll-utmip-supply:
+    description: UTMI PLL power supply. Must supply 1.8 V.
+
+  avdd-pll-erefe-supply:
+    description: PLLE reference PLL power supply. Must supply 1.05 V.
+
+  avdd-usb-ss-pll-supply:
+    description: PCIe/USB3 PLL power supply. Must supply 1.05 V.
+
+  hvdd-usb-ss-supply:
+    description: High-voltage PCIe/USB3 power supply. Must supply 3.3 V.
+
+  hvdd-usb-ss-pll-e-supply:
+    description: High-voltage PLLE power supply. Must supply 3.3 V.
+
+allOf:
+  - $ref: usb-xhci.yaml
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - nvidia,xusb-padctl
+  - phys
+  - phy-names
+  - avddio-pex-supply
+  - dvddio-pex-supply
+  - avdd-usb-supply
+  - hvdd-usb-ss-supply
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra124-car.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    usb@70090000 {
+        compatible = "nvidia,tegra124-xusb";
+        reg = <0x70090000 0x8000>,
+              <0x70098000 0x1000>,
+              <0x70099000 0x1000>;
+        reg-names = "hcd", "fpci", "ipfs";
+
+        interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+
+        clocks = <&tegra_car TEGRA124_CLK_XUSB_HOST>,
+                 <&tegra_car TEGRA124_CLK_XUSB_HOST_SRC>,
+                 <&tegra_car TEGRA124_CLK_XUSB_FALCON_SRC>,
+                 <&tegra_car TEGRA124_CLK_XUSB_SS>,
+                 <&tegra_car TEGRA124_CLK_XUSB_SS_DIV2>,
+                 <&tegra_car TEGRA124_CLK_XUSB_SS_SRC>,
+                 <&tegra_car TEGRA124_CLK_XUSB_HS_SRC>,
+                 <&tegra_car TEGRA124_CLK_XUSB_FS_SRC>,
+                 <&tegra_car TEGRA124_CLK_PLL_U_480M>,
+                 <&tegra_car TEGRA124_CLK_CLK_M>,
+                 <&tegra_car TEGRA124_CLK_PLL_E>;
+        clock-names = "xusb_host", "xusb_host_src", "xusb_falcon_src",
+                      "xusb_ss", "xusb_ss_div2", "xusb_ss_src",
+                      "xusb_hs_src", "xusb_fs_src", "pll_u_480m",
+                      "clk_m", "pll_e";
+        resets = <&tegra_car 89>, <&tegra_car 156>, <&tegra_car 143>;
+        reset-names = "xusb_host", "xusb_ss", "xusb_src";
+
+        nvidia,xusb-padctl = <&padctl>;
+
+        phys = <&{/padctl@0,7009f000/pads/usb2/lanes/usb2-1}>, /* mini-PCIe USB */
+               <&{/padctl@0,7009f000/pads/usb2/lanes/usb2-2}>, /* USB A */
+               <&{/padctl@0,7009f000/pads/pcie/lanes/pcie-0}>; /* USB A */
+        phy-names = "usb2-1", "usb2-2", "usb3-0";
+
+        avddio-pex-supply = <&vdd_1v05_run>;
+        dvddio-pex-supply = <&vdd_1v05_run>;
+        avdd-usb-supply = <&vdd_3v3_lp0>;
+        avdd-pll-utmip-supply = <&vddio_1v8>;
+        avdd-pll-erefe-supply = <&avdd_1v05_run>;
+        avdd-usb-ss-pll-supply = <&vdd_1v05_run>;
+        hvdd-usb-ss-supply = <&vdd_3v3_lp0>;
+        hvdd-usb-ss-pll-e-supply = <&vdd_3v3_lp0>;
+    };

Documentation/devicetree/bindings/usb/nvidia,tegra186-xusb.yaml

···
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/nvidia,tegra186-xusb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra186 xHCI controller
+
+maintainers:
+  - Thierry Reding <[e-mail]>
+  - Jon Hunter <[e-mail]>
+
+description: The Tegra xHCI controller supports both USB2 and USB3 interfaces
+  exposed by the Tegra XUSB pad controller.
+
+properties:
+  compatible:
+    const: nvidia,tegra186-xusb
+
+  reg:
+    items:
+      - description: base and length of the xHCI host registers
+      - description: base and length of the XUSB FPCI registers
+
+  reg-names:
+    items:
+      - const: hcd
+      - const: fpci
+
+  interrupts:
+    items:
+      - description: xHCI host interrupt
+      - description: mailbox interrupt
+
+  clocks:
+    items:
+      - description: XUSB host clock
+      - description: XUSB Falcon source clock
+      - description: XUSB SuperSpeed clock
+      - description: XUSB SuperSpeed source clock
+      - description: XUSB HighSpeed clock source
+      - description: XUSB FullSpeed clock source
+      - description: USB PLL
+      - description: reference clock
+      - description: I/O PLL
+
+  clock-names:
+    items:
+      - const: xusb_host
+      - const: xusb_falcon_src
+      - const: xusb_ss
+      - const: xusb_ss_src
+      - const: xusb_hs_src
+      - const: xusb_fs_src
+      - const: pll_u_480m
+      - const: clk_m
+      - const: pll_e
+
+  interconnects:
+    items:
+      - description: read client
+      - description: write client
+
+  interconnect-names:
+    items:
+      - const: dma-mem # read
+      - const: write
+
+  iommus:
+    maxItems: 1
+
+  nvidia,xusb-padctl:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: phandle to the XUSB pad controller that is used to configure
+      the USB pads used by the XHCI controller
+
+  phys:
+    minItems: 1
+    maxItems: 7
+
+  phy-names:
+    minItems: 1
+    maxItems: 7
+    items:
+      enum:
+        - usb2-0
+        - usb2-1
+        - usb2-2
+        - hsic-0
+        - usb3-0
+        - usb3-1
+        - usb3-2
+
+  power-domains:
+    items:
+      - description: XUSBC power domain (for Host and USB 2.0)
+      - description: XUSBA power domain (for SuperSpeed)
+
+  power-domain-names:
+    items:
+      - const: xusb_host
+      - const: xusb_ss
+
+  dvddio-pex-supply:
+    description: PCIe/USB3 analog logic power supply. Must supply 1.05 V.
+
+  hvddio-pex-supply:
+    description: High-voltage PCIe/USB3 power supply. Must supply 1.8 V.
+
+  avdd-usb-supply:
+    description: USB controller power supply. Must supply 3.3 V.
+
+  avdd-pll-utmip-supply:
+    description: UTMI PLL power supply. Must supply 1.8 V.
+
+  avdd-pll-uerefe-supply:
+    description: PLLE reference PLL power supply. Must supply 1.05 V.
+
+  dvdd-usb-ss-pll-supply:
+    description: PCIe/USB3 PLL power supply. Must supply 1.05 V.
+
+  hvdd-usb-ss-pll-e-supply:
+    description: High-voltage PLLE power supply. Must supply 1.8 V.
+
+allOf:
+  - $ref: usb-xhci.yaml
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra186-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/memory/tegra186-mc.h>
+    #include <dt-bindings/power/tegra186-powergate.h>
+    #include <dt-bindings/reset/tegra186-reset.h>
+
+    usb@3530000 {
+        compatible = "nvidia,tegra186-xusb";
+        reg = <0x03530000 0x8000>,
+              <0x03538000 0x1000>;
+        reg-names = "hcd", "fpci";
+        interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&bpmp TEGRA186_CLK_XUSB_HOST>,
+                 <&bpmp TEGRA186_CLK_XUSB_FALCON>,
+                 <&bpmp TEGRA186_CLK_XUSB_SS>,
+                 <&bpmp TEGRA186_CLK_XUSB_CORE_SS>,
+                 <&bpmp TEGRA186_CLK_CLK_M>,
+                 <&bpmp TEGRA186_CLK_XUSB_FS>,
+                 <&bpmp TEGRA186_CLK_PLLU>,
+                 <&bpmp TEGRA186_CLK_CLK_M>,
+                 <&bpmp TEGRA186_CLK_PLLE>;
+        clock-names = "xusb_host", "xusb_falcon_src", "xusb_ss",
+                      "xusb_ss_src", "xusb_hs_src", "xusb_fs_src",
+                      "pll_u_480m", "clk_m", "pll_e";
+        power-domains = <&bpmp TEGRA186_POWER_DOMAIN_XUSBC>,
+                        <&bpmp TEGRA186_POWER_DOMAIN_XUSBA>;
+        power-domain-names = "xusb_host", "xusb_ss";
+        interconnects = <&mc TEGRA186_MEMORY_CLIENT_XUSB_HOSTR &emc>,
+                        <&mc TEGRA186_MEMORY_CLIENT_XUSB_HOSTW &emc>;
+        interconnect-names = "dma-mem", "write";
+        iommus = <&smmu TEGRA186_SID_XUSB_HOST>;
+        nvidia,xusb-padctl = <&padctl>;
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        phys = <&{/padctl@3520000/pads/usb2/lanes/usb2-0}>,
+               <&{/padctl@3520000/pads/usb2/lanes/usb2-1}>,
+               <&{/padctl@3520000/pads/usb3/lanes/usb3-0}>;
+        phy-names = "usb2-0", "usb2-1", "usb3-0";
+    };

Documentation/devicetree/bindings/usb/nvidia,tegra194-xusb.yaml

···
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/nvidia,tegra194-xusb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra194 xHCI controller
+
+maintainers:
+  - Thierry Reding <[e-mail]>
+  - Jon Hunter <[e-mail]>
+
+description: The Tegra xHCI controller supports both USB2 and USB3 interfaces
+  exposed by the Tegra XUSB pad controller.
+
+properties:
+  compatible:
+    const: nvidia,tegra194-xusb
+
+  reg:
+    items:
+      - description: base and length of the xHCI host registers
+      - description: base and length of the XUSB FPCI registers
+
+  reg-names:
+    items:
+      - const: hcd
+      - const: fpci
+
+  interrupts:
+    items:
+      - description: xHCI host interrupt
+      - description: mailbox interrupt
+
+  clocks:
+    items:
+      - description: XUSB host clock
+      - description: XUSB Falcon source clock
+      - description: XUSB SuperSpeed clock
+      - description: XUSB SuperSpeed source clock
+      - description: XUSB HighSpeed clock source
+      - description: XUSB FullSpeed clock source
+      - description: USB PLL
+      - description: reference clock
+      - description: I/O PLL
+
+  clock-names:
+    items:
+      - const: xusb_host
+      - const: xusb_falcon_src
+      - const: xusb_ss
+      - const: xusb_ss_src
+      - const: xusb_hs_src
+      - const: xusb_fs_src
+      - const: pll_u_480m
+      - const: clk_m
+      - const: pll_e
+
+  interconnects:
+    items:
+      - description: read client
+      - description: write client
+
+  interconnect-names:
+    items:
+      - const: dma-mem # read
+      - const: write
+
+  iommus:
+    maxItems: 1
+
+  nvidia,xusb-padctl:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: phandle to the XUSB pad controller that is used to configure
+      the USB pads used by the XHCI controller
+
+  phys:
+    minItems: 1
+    maxItems: 8
+
+  phy-names:
+    minItems: 1
+    maxItems: 8
+    items:
+      enum:
+        - usb2-0
+        - usb2-1
+        - usb2-2
+        - usb2-3
+        - usb3-0
+        - usb3-1
+        - usb3-2
+        - usb3-3
+
+  power-domains:
+    items:
+      - description: XUSBC power domain (for Host and USB 2.0)
+      - description: XUSBA power domain (for SuperSpeed)
+
+  power-domain-names:
+    items:
+      - const: xusb_host
+      - const: xusb_ss
+
+  dvddio-pex-supply:
+    description: PCIe/USB3 analog logic power supply. Must supply 1.05 V.
+
+  hvddio-pex-supply:
+    description: High-voltage PCIe/USB3 power supply. Must supply 1.8 V.
+
+  avdd-usb-supply:
+    description: USB controller power supply. Must supply 3.3 V.
+
+  avdd-pll-utmip-supply:
+    description: UTMI PLL power supply. Must supply 1.8 V.
+
+  avdd-pll-uerefe-supply:
+    description: PLLE reference PLL power supply. Must supply 1.05 V.
+
+  dvdd-usb-ss-pll-supply:
+    description: PCIe/USB3 PLL power supply. Must supply 1.05 V.
+
+  hvdd-usb-ss-pll-e-supply:
+    description: High-voltage PLLE power supply. Must supply 1.8 V.
+
+allOf:
+  - $ref: usb-xhci.yaml
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra194-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/memory/tegra194-mc.h>
+    #include <dt-bindings/power/tegra194-powergate.h>
+    #include <dt-bindings/reset/tegra194-reset.h>
+
+    usb@3610000 {
+        compatible = "nvidia,tegra194-xusb";
+        reg = <0x03610000 0x40000>,
+              <0x03600000 0x10000>;
+        reg-names = "hcd", "fpci";
+
+        interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+
+        clocks = <&bpmp TEGRA194_CLK_XUSB_CORE_HOST>,
+                 <&bpmp TEGRA194_CLK_XUSB_FALCON>,
+                 <&bpmp TEGRA194_CLK_XUSB_CORE_SS>,
+                 <&bpmp TEGRA194_CLK_XUSB_SS>,
+                 <&bpmp TEGRA194_CLK_CLK_M>,
+                 <&bpmp TEGRA194_CLK_XUSB_FS>,
+                 <&bpmp TEGRA194_CLK_UTMIPLL>,
+                 <&bpmp TEGRA194_CLK_CLK_M>,
+                 <&bpmp TEGRA194_CLK_PLLE>;
+        clock-names = "xusb_host", "xusb_falcon_src",
+                      "xusb_ss", "xusb_ss_src", "xusb_hs_src",
+                      "xusb_fs_src", "pll_u_480m", "clk_m",
+                      "pll_e";
+        interconnects = <&mc TEGRA194_MEMORY_CLIENT_XUSB_HOSTR &emc>,
+                        <&mc TEGRA194_MEMORY_CLIENT_XUSB_HOSTW &emc>;
+        interconnect-names = "dma-mem", "write";
+        iommus = <&smmu TEGRA194_SID_XUSB_HOST>;
+
+        power-domains = <&bpmp TEGRA194_POWER_DOMAIN_XUSBC>,
+                        <&bpmp TEGRA194_POWER_DOMAIN_XUSBA>;
+        power-domain-names = "xusb_host", "xusb_ss";
+
+        nvidia,xusb-padctl = <&xusb_padctl>;
+
+        phys = <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-0}>,
+               <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-1}>,
+               <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-3}>,
+               <&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-0}>,
+               <&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-2}>,
+               <&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-3}>;
+        phy-names = "usb2-0", "usb2-1", "usb2-3", "usb3-0", "usb3-2", "usb3-3";
+    };

Documentation/devicetree/bindings/usb/nvidia,tegra210-xusb.yaml

···
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/nvidia,tegra210-xusb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra210 xHCI controller
+
+maintainers:
+  - Thierry Reding <[e-mail]>
+  - Jon Hunter <[e-mail]>
+
+description: The Tegra xHCI controller supports both USB2 and USB3 interfaces
+  exposed by the Tegra XUSB pad controller.
+
+properties:
+  compatible:
+    const: nvidia,tegra210-xusb
+
+  reg:
+    items:
+      - description: base and length of the xHCI host registers
+      - description: base and length of the XUSB FPCI registers
+      - description: base and length of the XUSB IPFS registers
+
+  reg-names:
+    items:
+      - const: hcd
+      - const: fpci
+      - const: ipfs
+
+  interrupts:
+    items:
+      - description: xHCI host interrupt
+      - description: mailbox interrupt
+
+  clocks:
+    items:
+      - description: XUSB host clock
+      - description: XUSB host source clock
+      - description: XUSB Falcon source clock
+      - description: XUSB SuperSpeed clock
+      - description: XUSB SuperSpeed clock divider
+      - description: XUSB SuperSpeed source clock
+      - description: XUSB HighSpeed clock source
+      - description: XUSB FullSpeed clock source
+      - description: USB PLL
+      - description: reference clock
+      - description: I/O PLL
+
+  clock-names:
+    items:
+      - const: xusb_host
+      - const: xusb_host_src
+      - const: xusb_falcon_src
+      - const: xusb_ss
+      - const: xusb_ss_div2
+      - const: xusb_ss_src
+      - const: xusb_hs_src
+      - const: xusb_fs_src
+      - const: pll_u_480m
+      - const: clk_m
+      - const: pll_e
+
+  resets:
+    items:
+      - description: reset for the XUSB host controller
+      - description: reset for the SuperSpeed logic
+      - description: shared reset for xusb_{ss,hs,fs,falcon,host}_src.
+
+  reset-names:
+    items:
+      - const: xusb_host
+      - const: xusb_ss
+      - const: xusb_src
+
+  nvidia,xusb-padctl:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: phandle to the XUSB pad controller that is used to configure
+      the USB pads used by the XHCI controller
+
+  phys:
+    minItems: 1
+    maxItems: 9
+
+  phy-names:
+    minItems: 1
+    maxItems: 9
+    items:
+      enum:
+        - usb2-0
+        - usb2-1
+        - usb2-2
+        - usb2-3
+        - hsic-0
+        - usb3-0
+        - usb3-1
+        - usb3-2
+        - usb3-3
+
+  power-domains:
+    items:
+      - description: XUSBC power domain (for Host and USB 2.0)
+      - description: XUSBA power domain (for SuperSpeed)
+
+  power-domain-names:
+    items:
+      - const: xusb_host
+      - const: xusb_ss
+
+  dvddio-pex-supply:
+    description: PCIe/USB3 analog logic power supply. Must supply 1.05 V.
+
+  hvddio-pex-supply:
+    description: High-voltage PCIe/USB3 power supply. Must supply 1.8 V.
+
+  avdd-usb-supply:
+    description: USB controller power supply. Must supply 3.3 V.
+
+  avdd-pll-utmip-supply:
+    description: UTMI PLL power supply. Must supply 1.8 V.
+
+  avdd-pll-uerefe-supply:
+    description: PLLE reference PLL power supply. Must supply 1.05 V.
+
+  dvdd-usb-ss-pll-supply:
+    description: PCIe/USB3 PLL power supply. Must supply 1.05 V.
+
+  hvdd-usb-ss-pll-e-supply:
+    description: High-voltage PLLE power supply. Must supply 1.8 V.
+
+allOf:
+  - $ref: usb-xhci.yaml
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra210-car.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    usb@70090000 {
+        compatible = "nvidia,tegra210-xusb";
+        reg = <0x70090000 0x8000>,
+              <0x70098000 0x1000>,
+              <0x70099000 0x1000>;
+        reg-names = "hcd", "fpci", "ipfs";
+
+        interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+
+        clocks = <&tegra_car TEGRA210_CLK_XUSB_HOST>,
+                 <&tegra_car TEGRA210_CLK_XUSB_HOST_SRC>,
+                 <&tegra_car TEGRA210_CLK_XUSB_FALCON_SRC>,
+                 <&tegra_car TEGRA210_CLK_XUSB_SS>,
+                 <&tegra_car TEGRA210_CLK_XUSB_SS_DIV2>,
+                 <&tegra_car TEGRA210_CLK_XUSB_SS_SRC>,
+                 <&tegra_car TEGRA210_CLK_XUSB_HS_SRC>,
+                 <&tegra_car TEGRA210_CLK_XUSB_FS_SRC>,
+                 <&tegra_car TEGRA210_CLK_PLL_U_480M>,
+                 <&tegra_car TEGRA210_CLK_CLK_M>,
+                 <&tegra_car TEGRA210_CLK_PLL_E>;
+        clock-names = "xusb_host", "xusb_host_src",
+                      "xusb_falcon_src", "xusb_ss",
+                      "xusb_ss_div2", "xusb_ss_src",
+                      "xusb_hs_src", "xusb_fs_src",
+                      "pll_u_480m", "clk_m", "pll_e";
+        resets = <&tegra_car 89>, <&tegra_car 156>,
+                 <&tegra_car 143>;
+        reset-names = "xusb_host", "xusb_ss", "xusb_src";
+        power-domains = <&pd_xusbhost>, <&pd_xusbss>;
+        power-domain-names = "xusb_host", "xusb_ss";
+
+        nvidia,xusb-padctl = <&padctl>;
+
+        phys = <&{/padctl@7009f000/pads/usb2/lanes/usb2-0}>,
+               <&{/padctl@7009f000/pads/usb2/lanes/usb2-1}>,
+               <&{/padctl@7009f000/pads/usb2/lanes/usb2-2}>,
+               <&{/padctl@7009f000/pads/usb2/lanes/usb2-3}>,
+               <&{/padctl@7009f000/pads/pcie/lanes/pcie-6}>,
+               <&{/padctl@7009f000/pads/pcie/lanes/pcie-5}>;
+        phy-names = "usb2-0", "usb2-1", "usb2-2", "usb2-3", "usb3-0",
+                    "usb3-1";
+        dvddio-pex-supply = <&vdd_pex_1v05>;
+        hvddio-pex-supply = <&vdd_1v8>;
+        avdd-usb-supply = <&vdd_3v3_sys>;
+        avdd-pll-utmip-supply = <&vdd_1v8>;
+        avdd-pll-uerefe-supply = <&vdd_pex_1v05>;
+        dvdd-usb-ss-pll-supply = <&vdd_pex_1v05>;
+        hvdd-usb-ss-pll-e-supply = <&vdd_1v8>;
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ethernet@1 {
+                compatible = "usb955,9ff";
+                reg = <1>;
+        };
+    };

include/dt-bindings/clock/tegra234-clock.h

···
  * @defgroup bpmp_clock_ids Clock ID's
  * @{
  */
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_ACTMON */
+#define TEGRA234_CLK_ACTMON			1U
+/** @brief output of gate CLK_ENB_ADSP */
+#define TEGRA234_CLK_ADSP			2U
+/** @brief output of gate CLK_ENB_ADSPNEON */
+#define TEGRA234_CLK_ADSPNEON			3U
 /** output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_AHUB */
 #define TEGRA234_CLK_AHUB			4U
 /** @brief output of gate CLK_ENB_APB2APE */
···
 #define TEGRA234_CLK_APE			6U
 /** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_AUD_MCLK */
 #define TEGRA234_CLK_AUD_MCLK			7U
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_AXI_CBB */
+#define TEGRA234_CLK_AXI_CBB			8U
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_CAN1 */
+#define TEGRA234_CLK_CAN1			9U
+/** @brief output of gate CLK_ENB_CAN1_HOST */
+#define TEGRA234_CLK_CAN1_HOST			10U
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_CAN2 */
+#define TEGRA234_CLK_CAN2			11U
+/** @brief output of gate CLK_ENB_CAN2_HOST */
+#define TEGRA234_CLK_CAN2_HOST			12U
+/** @brief output of divider CLK_RST_CONTROLLER_CLK_M_DIVIDE */
+#define TEGRA234_CLK_CLK_M			14U
 /** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_DMIC1 */
 #define TEGRA234_CLK_DMIC1			15U
 /** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_DMIC2 */
···
 #define TEGRA234_CLK_DMIC3			17U
 /** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_DMIC4 */
 #define TEGRA234_CLK_DMIC4			18U
+/** @brief output of gate CLK_ENB_DPAUX */
+#define TEGRA234_CLK_DPAUX			19U
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_NVJPG1 */
+#define TEGRA234_CLK_NVJPG1			20U
+/**
+ * @brief output of mux controlled by CLK_RST_CONTROLLER_ACLK_BURST_POLICY
+ * divided by the divider controlled by ACLK_CLK_DIVISOR in
+ * CLK_RST_CONTROLLER_SUPER_ACLK_DIVIDER
+ */
+#define TEGRA234_CLK_ACLK			21U
+/** @brief CLK_RST_CONTROLLER_CLK_SOURCE_MSS_ENCRYPT switch divider output */
+#define TEGRA234_CLK_MSS_ENCRYPT		22U
+/** @brief clock recovered from EAVB input */
+#define TEGRA234_CLK_EQOS_RX_INPUT		23U
+/** @brief CLK_RST_CONTROLLER_CLK_SOURCE_AON_APB switch divider output */
+#define TEGRA234_CLK_AON_APB			25U
+/** @brief CLK_RST_CONTROLLER_AON_NIC_RATE divider output */
+#define TEGRA234_CLK_AON_NIC			26U
+/** @brief CLK_RST_CONTROLLER_CLK_SOURCE_AON_CPU_NIC switch divider output */
+#define TEGRA234_CLK_AON_CPU_NIC		27U
+/** @brief PLL controlled by CLK_RST_CONTROLLER_PLLA1_BASE for use by audio clocks */
+#define TEGRA234_CLK_PLLA1			28U
 /** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_DSPK1 */
 #define TEGRA234_CLK_DSPK1			29U
 /** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_DSPK2 */
···
  * throughput and memory controller power.
  */
 #define TEGRA234_CLK_EMC			31U
-/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_HOST1X */
-#define TEGRA234_CLK_HOST1X                     46U
+/** @brief CLK_RST_CONTROLLER_CLK_SOURCE_EQOS_AXI_CLK_0 divider gated output */
+#define TEGRA234_CLK_EQOS_AXI			32U
+/** @brief CLK_RST_CONTROLLER_CLK_SOURCE_EQOS_PTP_REF_CLK_0 divider gated output */
+#define TEGRA234_CLK_EQOS_PTP_REF		33U
+/** @brief output of gate CLK_ENB_EQOS_RX */
+#define TEGRA234_CLK_EQOS_RX			34U
+/** @brief CLK_RST_CONTROLLER_CLK_SOURCE_EQOS_TX_CLK divider gated output */
+#define TEGRA234_CLK_EQOS_TX			35U
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_EXTPERIPH1 */
+#define TEGRA234_CLK_EXTPERIPH1			36U
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_EXTPERIPH2 */
+#define TEGRA234_CLK_EXTPERIPH2			37U
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_EXTPERIPH3 */
+#define TEGRA234_CLK_EXTPERIPH3			38U
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_EXTPERIPH4 */
+#define TEGRA234_CLK_EXTPERIPH4			39U
 /** @brief output of gate CLK_ENB_FUSE */
 #define TEGRA234_CLK_FUSE			40U
+/** @brief output of GPU GPC0 clkGen (in 1x mode same rate as GPC0 MUX2 out) */
+#define TEGRA234_CLK_GPC0CLK			41U
+/** @brief TODO */
+#define TEGRA234_CLK_GPU_PWR			42U
+/** output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_HDA2CODEC_2X */
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_HOST1X */
+#define TEGRA234_CLK_HOST1X			46U
+/** @brief xusb_hs_hsicp_clk */
+#define TEGRA234_CLK_XUSB_HS_HSICP		47U
 /** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_I2C1 */
 #define TEGRA234_CLK_I2C1			48U
 /** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_I2C2 */
···
 #define TEGRA234_CLK_I2S6			66U
 /** @brief clock recovered from I2S6 input */
 #define TEGRA234_CLK_I2S6_SYNC_INPUT		67U
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_ISP */
+#define TEGRA234_CLK_ISP			69U
+/** @brief Monitored branch of EQOS_RX clock */
+#define TEGRA234_CLK_EQOS_RX_M			70U
+/** @brief CLK_RST_CONTROLLER_MAUDCLK_OUT_SWITCH_DIVIDER switch divider output (maudclk) */
+#define TEGRA234_CLK_MAUD			71U
+/** @brief output of gate CLK_ENB_MIPI_CAL */
+#define TEGRA234_CLK_MIPI_CAL			72U
+/** @brief output of the divider CLK_RST_CONTROLLER_CLK_SOURCE_MPHY_CORE_PLL_FIXED */
+#define TEGRA234_CLK_MPHY_CORE_PLL_FIXED	73U
+/** @brief output of gate CLK_ENB_MPHY_L0_RX_ANA */
+#define TEGRA234_CLK_MPHY_L0_RX_ANA		74U
+/** @brief output of gate CLK_ENB_MPHY_L0_RX_LS_BIT */
+#define TEGRA234_CLK_MPHY_L0_RX_LS_BIT		75U
+/** @brief output of gate CLK_ENB_MPHY_L0_RX_SYMB */
+#define TEGRA234_CLK_MPHY_L0_RX_SYMB		76U
+/** @brief output of gate CLK_ENB_MPHY_L0_TX_LS_3XBIT */
+#define TEGRA234_CLK_MPHY_L0_TX_LS_3XBIT	77U
+/** @brief output of gate CLK_ENB_MPHY_L0_TX_SYMB */
+#define TEGRA234_CLK_MPHY_L0_TX_SYMB		78U
+/** @brief output of gate CLK_ENB_MPHY_L1_RX_ANA */
+#define TEGRA234_CLK_MPHY_L1_RX_ANA		79U
+/** @brief output of the divider CLK_RST_CONTROLLER_CLK_SOURCE_MPHY_TX_1MHZ_REF */
+#define TEGRA234_CLK_MPHY_TX_1MHZ_REF		80U
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_NVCSI */
+#define TEGRA234_CLK_NVCSI			81U
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_NVCSILP */
+#define TEGRA234_CLK_NVCSILP			82U
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_NVDEC */
+#define TEGRA234_CLK_NVDEC			83U
+/** @brief CLK_RST_CONTROLLER_HUBCLK_OUT_SWITCH_DIVIDER switch divider output (hubclk) */
+#define TEGRA234_CLK_HUB			84U
+/** @brief CLK_RST_CONTROLLER_DISPCLK_SWITCH_DIVIDER switch divider output (dispclk) */
+#define TEGRA234_CLK_DISP			85U
+/** @brief RG_CLK_CTRL__0_DIV divider output (nvdisplay_p0_clk) */
+#define TEGRA234_CLK_NVDISPLAY_P0		86U
+/** @brief RG_CLK_CTRL__1_DIV divider output (nvdisplay_p1_clk) */
+#define TEGRA234_CLK_NVDISPLAY_P1		87U
+/** @brief DSC_CLK (DISPCLK ÷ 3) */
+#define TEGRA234_CLK_DSC			88U
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_NVENC */
+#define TEGRA234_CLK_NVENC			89U
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_NVJPG */
+#define TEGRA234_CLK_NVJPG			90U
+/** @brief input from Tegra's XTAL_IN */
+#define TEGRA234_CLK_OSC			91U
+/** @brief CLK_RST_CONTROLLER_CLK_SOURCE_AON_TOUCH switch divider output */
+#define TEGRA234_CLK_AON_TOUCH			92U
 /** PLL controlled by CLK_RST_CONTROLLER_PLLA_BASE for use by audio clocks */
 #define TEGRA234_CLK_PLLA			93U
+/** @brief PLL controlled by CLK_RST_CONTROLLER_PLLAON_BASE for use by IP blocks in the AON domain */
+#define TEGRA234_CLK_PLLAON			94U
+/** Fixed 100MHz PLL for PCIe, SATA and superspeed USB */
+#define TEGRA234_CLK_PLLE			100U
+/** @brief PLLP vco output */
+#define TEGRA234_CLK_PLLP			101U
 /** @brief PLLP clk output */
 #define TEGRA234_CLK_PLLP_OUT0			102U
+/** Fixed frequency 960MHz PLL for USB and EAVB */
+#define TEGRA234_CLK_UTMIP_PLL			103U
 /** @brief output of the divider CLK_RST_CONTROLLER_PLLA_OUT */
 #define TEGRA234_CLK_PLLA_OUT0			104U
 /** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_PWM1 */
···
 #define TEGRA234_CLK_PWM7			111U
 /** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_PWM8 */
 #define TEGRA234_CLK_PWM8			112U
+/** @brief CLK_RST_CONTROLLER_CLK_SOURCE_RCE_CPU_NIC output */
+#define TEGRA234_CLK_RCE_CPU_NIC		113U
+/** @brief CLK_RST_CONTROLLER_RCE_NIC_RATE divider output */
+#define TEGRA234_CLK_RCE_NIC			114U
+/** @brief CLK_RST_CONTROLLER_CLK_SOURCE_AON_I2C_SLOW switch divider output */
+#define TEGRA234_CLK_AON_I2C_SLOW		117U
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_SCE_CPU_NIC */
+#define TEGRA234_CLK_SCE_CPU_NIC		118U
+/** @brief output of divider CLK_RST_CONTROLLER_SCE_NIC_RATE */
+#define TEGRA234_CLK_SCE_NIC			119U
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_SDMMC1 */
+#define TEGRA234_CLK_SDMMC1			120U
+/** @brief Logical clk for setting the UPHY PLL3 rate */
+#define TEGRA234_CLK_UPHY_PLL3			121U
 /** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_SDMMC4 */
 #define TEGRA234_CLK_SDMMC4			123U
+/** @brief CLK_RST_CONTROLLER_CLK_SOURCE_SE switch divider gated output */
+#define TEGRA234_CLK_SE				124U
+/** @brief VPLL select for sor0_ref clk driven by disp_2clk_sor0_head_sel signal */
+#define TEGRA234_CLK_SOR0_PLL_REF		125U
+/** @brief Output of mux controlled by disp_2clk_sor0_pll_ref_clk_safe signal (sor0_ref_clk) */
+#define TEGRA234_CLK_SOR0_REF			126U
+/** @brief VPLL select for sor1_ref clk driven by disp_2clk_sor0_head_sel signal */
+#define TEGRA234_CLK_SOR1_PLL_REF		127U
+/** @brief SOR_PLL_REF_CLK_CTRL__0_DIV divider output */
+#define TEGRA234_CLK_PRE_SOR0_REF		128U
+/** @brief Output of mux controlled by disp_2clk_sor1_pll_ref_clk_safe signal (sor1_ref_clk) */
+#define TEGRA234_CLK_SOR1_REF			129U
+/** @brief SOR_PLL_REF_CLK_CTRL__1_DIV divider output */
+#define TEGRA234_CLK_PRE_SOR1_REF		130U
+/** @brief output of gate CLK_ENB_SOR_SAFE */
+#define TEGRA234_CLK_SOR_SAFE			131U
+/** @brief SOR_CLK_CTRL__0_DIV divider output */
+#define TEGRA234_CLK_SOR0_DIV			132U
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_DMIC5 */
+#define TEGRA234_CLK_DMIC5			134U
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_SPI1 */
+#define TEGRA234_CLK_SPI1			135U
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_SPI2 */
+#define TEGRA234_CLK_SPI2			136U
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_SPI3 */
+#define TEGRA234_CLK_SPI3			137U
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_I2C_SLOW */
+#define TEGRA234_CLK_I2C_SLOW			138U
 /** @brief output of mux controlled by CLK_RST_CONTROLLER_AUDIO_SYNC_CLK_DMIC1 */
 #define TEGRA234_CLK_SYNC_DMIC1			139U
 /** @brief output of mux controlled by CLK_RST_CONTROLLER_AUDIO_SYNC_CLK_DMIC2 */
···
 #define TEGRA234_CLK_SYNC_I2S5			149U
 /** @brief output of mux controlled by CLK_RST_CONTROLLER_AUDIO_SYNC_CLK_I2S6 */
 #define TEGRA234_CLK_SYNC_I2S6			150U
+/** @brief controls MPHY_FORCE_LS_MODE upon enable & disable */
+#define TEGRA234_CLK_MPHY_FORCE_LS_MODE		151U
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_TACH0 */
+#define TEGRA234_CLK_TACH0			152U
+/** output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_TSEC */
+#define TEGRA234_CLK_TSEC			153U
+/** output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_PKA */
+#define TEGRA234_CLK_TSEC_PKA			154U
 /** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_UARTA */
 #define TEGRA234_CLK_UARTA			155U
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_UARTB */
+#define TEGRA234_CLK_UARTB			156U
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_UARTC */
+#define TEGRA234_CLK_UARTC			157U
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_UARTD */
+#define TEGRA234_CLK_UARTD			158U
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_UARTE */
+#define TEGRA234_CLK_UARTE			159U
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_UARTF */
+#define TEGRA234_CLK_UARTF			160U
 /** @brief output of gate CLK_ENB_PEX1_CORE_6 */
 #define TEGRA234_CLK_PEX1_C6_CORE		161U
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_UART_FST_MIPI_CAL */
+#define TEGRA234_CLK_UART_FST_MIPI_CAL		162U
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_UFSDEV_REF */
+#define TEGRA234_CLK_UFSDEV_REF			163U
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_UFSHC_CG_SYS */
+#define TEGRA234_CLK_UFSHC			164U
+/** @brief output of gate CLK_ENB_USB2_TRK */
+#define TEGRA234_CLK_USB2_TRK			165U
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_VI */
+#define TEGRA234_CLK_VI				166U
 /** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_VIC */
-#define TEGRA234_CLK_VIC                        167U
+#define TEGRA234_CLK_VIC			167U
+/** @brief CLK_RST_CONTROLLER_CLK_SOURCE_CSITE switch divider output */
+#define TEGRA234_CLK_CSITE			168U
+/** @brief CLK_RST_CONTROLLER_CLK_SOURCE_IST switch divider output */
+#define TEGRA234_CLK_IST			169U
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_IST_JTAG_REG_CLK_SEL */
+#define TEGRA234_CLK_JTAG_INTFC_PRE_CG		170U
 /** @brief output of gate CLK_ENB_PEX2_CORE_7 */
 #define TEGRA234_CLK_PEX2_C7_CORE		171U
 /** @brief output of gate CLK_ENB_PEX2_CORE_8 */
 #define TEGRA234_CLK_PEX2_C8_CORE		172U
 /** @brief output of gate CLK_ENB_PEX2_CORE_9 */
 #define TEGRA234_CLK_PEX2_C9_CORE		173U
+/** @brief dla0_falcon_clk */
+#define TEGRA234_CLK_DLA0_FALCON		174U
+/** @brief dla0_core_clk */
+#define TEGRA234_CLK_DLA0_CORE			175U
+/** @brief dla1_falcon_clk */
+#define TEGRA234_CLK_DLA1_FALCON		176U
+/** @brief dla1_core_clk */
+#define TEGRA234_CLK_DLA1_CORE			177U
+/** @brief Output of mux controlled by disp_2clk_sor0_clk_safe signal (sor0_clk) */
+#define TEGRA234_CLK_SOR0			178U
+/** @brief Output of mux controlled by disp_2clk_sor1_clk_safe signal (sor1_clk) */
+#define TEGRA234_CLK_SOR1			179U
+/** @brief DP macro feedback clock (same as LINKA_SYM CLKOUT) */
+#define TEGRA234_CLK_SOR_PAD_INPUT		180U
+/** @brief Output of mux controlled by disp_2clk_h0_dsi_sel signal in sf0_clk path */
+#define TEGRA234_CLK_PRE_SF0			181U
+/** @brief Output of mux controlled by disp_2clk_sf0_clk_safe signal (sf0_clk) */
+#define TEGRA234_CLK_SF0			182U
+/** @brief Output of mux controlled by disp_2clk_sf1_clk_safe signal (sf1_clk) */
+#define TEGRA234_CLK_SF1			183U
+/** @brief CLKOUT_AB output from DSI BRICK A (dsi_clkout_ab) */
+#define TEGRA234_CLK_DSI_PAD_INPUT		184U
 /** @brief output of gate CLK_ENB_PEX2_CORE_10 */
 #define TEGRA234_CLK_PEX2_C10_CORE		187U
-/** @brief CLK_RST_CONTROLLER_CLK_SOURCE_QSPI0 switch divider output */
+/** @brief CLK_RST_CONTROLLER_CLK_SOURCE_UARTI switch divider output (uarti_r_clk) */
+#define TEGRA234_CLK_UARTI			188U
+/** @brief CLK_RST_CONTROLLER_CLK_SOURCE_UARTJ switch divider output (uartj_r_clk) */
+#define TEGRA234_CLK_UARTJ			189U
+/** @brief CLK_RST_CONTROLLER_CLK_SOURCE_UARTH switch divider output */
+#define TEGRA234_CLK_UARTH			190U
+/** @brief ungated version of fuse clk */
+#define TEGRA234_CLK_FUSE_SERIAL		191U
+/** @brief CLK_RST_CONTROLLER_CLK_SOURCE_QSPI0 switch divider output (qspi0_2x_pm_clk) */
 #define TEGRA234_CLK_QSPI0_2X_PM		192U
-/** @brief CLK_RST_CONTROLLER_CLK_SOURCE_QSPI1 switch divider output */
+/** @brief CLK_RST_CONTROLLER_CLK_SOURCE_QSPI1 switch divider output (qspi1_2x_pm_clk) */
 #define TEGRA234_CLK_QSPI1_2X_PM		193U
-/** @brief output of the divider QSPI_CLK_DIV2_SEL in CLK_RST_CONTROLLER_CLK_SOURCE_QSPI0 */
+/** @brief output of the divider QSPI_CLK_DIV2_SEL in CLK_RST_CONTROLLER_CLK_SOURCE_QSPI0 (qspi0_pm_clk) */
 #define TEGRA234_CLK_QSPI0_PM			194U
-/** @brief output of the divider QSPI_CLK_DIV2_SEL in CLK_RST_CONTROLLER_CLK_SOURCE_QSPI1 */
+/** @brief output of the divider QSPI_CLK_DIV2_SEL in CLK_RST_CONTROLLER_CLK_SOURCE_QSPI1 (qspi1_pm_clk) */
 #define TEGRA234_CLK_QSPI1_PM			195U
+/** @brief CLK_RST_CONTROLLER_CLK_SOURCE_VI_CONST switch divider output */
+#define TEGRA234_CLK_VI_CONST			196U
+/** @brief NAFLL clock source for BPMP */
+#define TEGRA234_CLK_NAFLL_BPMP			197U
+/** @brief NAFLL clock source for SCE */
+#define TEGRA234_CLK_NAFLL_SCE			198U
+/** @brief NAFLL clock source for NVDEC */
+#define TEGRA234_CLK_NAFLL_NVDEC		199U
+/** @brief NAFLL clock source for NVJPG */
+#define TEGRA234_CLK_NAFLL_NVJPG		200U
+/** @brief NAFLL clock source for TSEC */
+#define TEGRA234_CLK_NAFLL_TSEC			201U
+/** @brief NAFLL clock source for VI */
+#define TEGRA234_CLK_NAFLL_VI			203U
+/** @brief NAFLL clock source for SE */
+#define TEGRA234_CLK_NAFLL_SE			204U
+/** @brief NAFLL clock source for NVENC */
+#define TEGRA234_CLK_NAFLL_NVENC		205U
+/** @brief NAFLL clock source for ISP */
+#define TEGRA234_CLK_NAFLL_ISP			206U
+/** @brief NAFLL clock source for VIC */
+#define TEGRA234_CLK_NAFLL_VIC			207U
+/** @brief NAFLL clock source for AXICBB */
+#define TEGRA234_CLK_NAFLL_AXICBB		209U
+/** @brief NAFLL clock source for NVJPG1 */
+#define TEGRA234_CLK_NAFLL_NVJPG1		210U
+/** @brief NAFLL clock source for PVA core */
+#define TEGRA234_CLK_NAFLL_PVA0_CORE		211U
+/** @brief NAFLL clock source for PVA VPS */
+#define TEGRA234_CLK_NAFLL_PVA0_VPS		212U
+/** @brief CLK_RST_CONTROLLER_CLK_SOURCE_DBGAPB_0 switch divider output (dbgapb_clk) */
+#define TEGRA234_CLK_DBGAPB			213U
+/** @brief NAFLL clock source for RCE */
+#define TEGRA234_CLK_NAFLL_RCE			214U
+/** @brief CLK_RST_CONTROLLER_CLK_SOURCE_LA switch divider output (la_r_clk) */
+#define TEGRA234_CLK_LA				215U
+/** @brief output of the divider CLK_RST_CONTROLLER_PLLP_OUTD */
+#define TEGRA234_CLK_PLLP_OUT_JTAG		216U
+/** @brief AXI_CBB branch sharing gate control with SDMMC4 */
+#define TEGRA234_CLK_SDMMC4_AXICIF		217U
 /** @brief CLK_RST_CONTROLLER_CLK_SOURCE_SDMMC_LEGACY_TM switch divider output */
 #define TEGRA234_CLK_SDMMC_LEGACY_TM		219U
 /** @brief output of gate CLK_ENB_PEX0_CORE_0 */
···
 #define TEGRA234_CLK_PEX0_C4_CORE		224U
 /** @brief output of gate CLK_ENB_PEX1_CORE_5 */
 #define TEGRA234_CLK_PEX1_C5_CORE		225U
+/** @brief Monitored branch of PEX0_C0_CORE clock */
+#define TEGRA234_CLK_PEX0_C0_CORE_M		229U
+/** @brief Monitored branch of PEX0_C1_CORE clock */
+#define TEGRA234_CLK_PEX0_C1_CORE_M		230U
+/** @brief Monitored branch of PEX0_C2_CORE clock */
+#define TEGRA234_CLK_PEX0_C2_CORE_M		231U
+/** @brief Monitored branch of PEX0_C3_CORE clock */
+#define TEGRA234_CLK_PEX0_C3_CORE_M		232U
+/** @brief Monitored branch of PEX0_C4_CORE clock */
+#define TEGRA234_CLK_PEX0_C4_CORE_M		233U
+/** @brief Monitored branch of PEX1_C5_CORE clock */
+#define TEGRA234_CLK_PEX1_C5_CORE_M		234U
+/** @brief Monitored branch of PEX1_C6_CORE clock */
+#define TEGRA234_CLK_PEX1_C6_CORE_M		235U
+/** @brief output of GPU GPC1 clkGen (in 1x mode same rate as GPC1 MUX2 out) */
+#define TEGRA234_CLK_GPC1CLK			236U
 /** @brief PLL controlled by CLK_RST_CONTROLLER_PLLC4_BASE */
 #define TEGRA234_CLK_PLLC4			237U
+/** @brief PLLC4 VCO followed by DIV3 path */
+#define TEGRA234_CLK_PLLC4_OUT1			239U
+/** @brief PLLC4 VCO followed by DIV5 path */
+#define TEGRA234_CLK_PLLC4_OUT2			240U
+/** @brief output of the mux controlled by PLLC4_CLK_SEL */
+#define TEGRA234_CLK_PLLC4_MUXED		241U
+/** @brief PLLC4 VCO followed by DIV2 path */
+#define TEGRA234_CLK_PLLC4_VCO_DIV2		242U
+/** @brief PLL controlled by CLK_RST_CONTROLLER_PLLNVHS_BASE */
+#define TEGRA234_CLK_PLLNVHS			243U
+/** @brief Monitored branch of PEX2_C7_CORE clock */
+#define TEGRA234_CLK_PEX2_C7_CORE_M		244U
+/** @brief Monitored branch of PEX2_C8_CORE clock */
+#define TEGRA234_CLK_PEX2_C8_CORE_M		245U
+/** @brief Monitored branch of PEX2_C9_CORE clock */
+#define TEGRA234_CLK_PEX2_C9_CORE_M		246U
+/** @brief Monitored branch of PEX2_C10_CORE clock */
+#define TEGRA234_CLK_PEX2_C10_CORE_M		247U
 /** @brief RX clock recovered from MGBE0 lane input */
 #define TEGRA234_CLK_MGBE0_RX_INPUT		248U
 /** @brief RX clock recovered from MGBE1 lane input */
···
 #define TEGRA234_CLK_MGBE2_RX_INPUT		250U
 /** @brief RX clock recovered from MGBE3 lane input */
 #define TEGRA234_CLK_MGBE3_RX_INPUT		251U
+/** @brief CLK_RST_CONTROLLER_CLK_SOURCE_PEX_SATA_USB_RX_BYP switch divider output */
+#define TEGRA234_CLK_PEX_SATA_USB_RX_BYP	254U
+/** @brief CLK_RST_CONTROLLER_CLK_SOURCE_PEX_USB_PAD_PLL0_MGMT switch divider output */
+#define TEGRA234_CLK_PEX_USB_PAD_PLL0_MGMT	255U
+/** @brief CLK_RST_CONTROLLER_CLK_SOURCE_PEX_USB_PAD_PLL1_MGMT switch divider output */
+#define TEGRA234_CLK_PEX_USB_PAD_PLL1_MGMT	256U
+/** @brief CLK_RST_CONTROLLER_CLK_SOURCE_PEX_USB_PAD_PLL2_MGMT switch divider output */
+#define TEGRA234_CLK_PEX_USB_PAD_PLL2_MGMT	257U
+/** @brief CLK_RST_CONTROLLER_CLK_SOURCE_PEX_USB_PAD_PLL3_MGMT switch divider output */
+#define TEGRA234_CLK_PEX_USB_PAD_PLL3_MGMT	258U
+/** @brief CLK_RST_CONTROLLER_CLK_SOURCE_NVHS_RX_BYP switch divider output */
+#define TEGRA234_CLK_NVHS_RX_BYP_REF		263U
+/** @brief CLK_RST_CONTROLLER_CLK_SOURCE_NVHS_PLL0_MGMT switch divider output */
+#define TEGRA234_CLK_NVHS_PLL0_MGMT		264U
+/** @brief xusb_core_dev_clk */
+#define TEGRA234_CLK_XUSB_CORE_DEV		265U
+/** @brief CLK_RST_CONTROLLER_CLK_SOURCE_XUSB_CORE_HOST switch divider output  */
+#define TEGRA234_CLK_XUSB_CORE_MUX		266U
+/** @brief xusb_core_host_clk */
+#define TEGRA234_CLK_XUSB_CORE_HOST		267U
+/** @brief xusb_core_superspeed_clk */
+#define TEGRA234_CLK_XUSB_CORE_SS		268U
+/** @brief CLK_RST_CONTROLLER_CLK_SOURCE_XUSB_FALCON switch divider output */
+#define TEGRA234_CLK_XUSB_FALCON		269U
+/** @brief xusb_falcon_host_clk */
+#define TEGRA234_CLK_XUSB_FALCON_HOST		270U
+/** @brief xusb_falcon_superspeed_clk */
+#define TEGRA234_CLK_XUSB_FALCON_SS		271U
+/** @brief CLK_RST_CONTROLLER_CLK_SOURCE_XUSB_FS switch divider output */
+#define TEGRA234_CLK_XUSB_FS			272U
+/** @brief xusb_fs_host_clk */
+#define TEGRA234_CLK_XUSB_FS_HOST		273U
+/** @brief xusb_fs_dev_clk */
+#define TEGRA234_CLK_XUSB_FS_DEV		274U
+/** @brief CLK_RST_CONTROLLER_CLK_SOURCE_XUSB_SS switch divider output */
+#define TEGRA234_CLK_XUSB_SS			275U
+/** @brief xusb_ss_dev_clk */
+#define TEGRA234_CLK_XUSB_SS_DEV		276U
+/** @brief xusb_ss_superspeed_clk */
+#define TEGRA234_CLK_XUSB_SS_SUPERSPEED		277U
+/** @brief NAFLL clock source for CPU cluster 0 */
+#define TEGRA234_CLK_NAFLL_CLUSTER0		280U /* TODO: remove */
+#define TEGRA234_CLK_NAFLL_CLUSTER0_CORE	280U
+/** @brief NAFLL clock source for CPU cluster 1 */
+#define TEGRA234_CLK_NAFLL_CLUSTER1		281U /* TODO: remove */
+#define TEGRA234_CLK_NAFLL_CLUSTER1_CORE	281U
+/** @brief NAFLL clock source for CPU cluster 2 */
+#define TEGRA234_CLK_NAFLL_CLUSTER2		282U /* TODO: remove */
+#define TEGRA234_CLK_NAFLL_CLUSTER2_CORE	282U
+/** @brief CLK_RST_CONTROLLER_CAN1_CORE_RATE divider output */
+#define TEGRA234_CLK_CAN1_CORE			284U
+/** @brief CLK_RST_CONTROLLER_CAN2_CORE_RATE divider outputt */
+#define TEGRA234_CLK_CAN2_CORE			285U
+/** @brief CLK_RST_CONTROLLER_PLLA1_OUT1 switch divider output */
+#define TEGRA234_CLK_PLLA1_OUT1			286U
+/** @brief NVHS PLL hardware power sequencer (overrides 'manual' programming of PLL) */
+#define TEGRA234_CLK_PLLNVHS_HPS		287U
+/** @brief PLL controlled by CLK_RST_CONTROLLER_PLLREFE_BASE */
+#define TEGRA234_CLK_PLLREFE_VCOOUT		288U
 /** @brief 32K input clock provided by PMIC */
 #define TEGRA234_CLK_CLK_32K			289U
+/** @brief Fixed 48MHz clock divided down from utmipll */
+#define TEGRA234_CLK_UTMIPLL_CLKOUT48		291U
+/** @brief Fixed 480MHz clock divided down from utmipll */
+#define TEGRA234_CLK_UTMIPLL_CLKOUT480		292U
+/** @brief PLL controlled by CLK_RST_CONTROLLER_PLLNVCSI_BASE  */
+#define TEGRA234_CLK_PLLNVCSI			294U
+/** @brief CLK_RST_CONTROLLER_CLK_SOURCE_PVA0_CPU_AXI switch divider output */
+#define TEGRA234_CLK_PVA0_CPU_AXI		295U
+/** @brief CLK_RST_CONTROLLER_CLK_SOURCE_PVA0_VPS switch divider output */
+#define TEGRA234_CLK_PVA0_VPS			297U
+/** @brief DLA0_CORE_NAFLL */
+#define TEGRA234_CLK_NAFLL_DLA0_CORE		299U
+/** @brief DLA0_FALCON_NAFLL */
+#define TEGRA234_CLK_NAFLL_DLA0_FALCON		300U
+/** @brief DLA1_CORE_NAFLL */
+#define TEGRA234_CLK_NAFLL_DLA1_CORE		301U
+/** @brief DLA1_FALCON_NAFLL */
+#define TEGRA234_CLK_NAFLL_DLA1_FALCON		302U
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_AON_UART_FST_MIPI_CAL */
+#define TEGRA234_CLK_AON_UART_FST_MIPI_CAL	303U
+/** @brief GPU system clock */
+#define TEGRA234_CLK_GPUSYS			304U
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_I2C5 */
+#define TEGRA234_CLK_I2C5			305U
+/** @brief CLK_RST_CONTROLLER_CLK_SOURCE_SE switch divider free running clk */
+#define TEGRA234_CLK_FR_SE			306U
+/** @brief CLK_RST_CONTROLLER_CLK_SOURCE_BPMP_CPU_NIC switch divider output */
+#define TEGRA234_CLK_BPMP_CPU_NIC		307U
+/** @brief output of gate CLK_ENB_BPMP_CPU */
+#define TEGRA234_CLK_BPMP_CPU			308U
+/** @brief CLK_RST_CONTROLLER_CLK_SOURCE_TSC switch divider output */
+#define TEGRA234_CLK_TSC			309U
+/** @brief output of mem pll A sync mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_EMC */
+#define TEGRA234_CLK_EMCSA_MPLL			310U
+/** @brief output of mem pll B sync mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_EMCSB */
+#define TEGRA234_CLK_EMCSB_MPLL			311U
+/** @brief output of mem pll C sync mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_EMCSC */
+#define TEGRA234_CLK_EMCSC_MPLL			312U
+/** @brief output of mem pll D sync mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_EMCSD */
+#define TEGRA234_CLK_EMCSD_MPLL			313U
+/** @brief PLL controlled by CLK_RST_CONTROLLER_PLLC_BASE */
+#define TEGRA234_CLK_PLLC			314U
+/** @brief PLL controlled by CLK_RST_CONTROLLER_PLLC2_BASE */
+#define TEGRA234_CLK_PLLC2			315U
+/** @brief CLK_RST_CONTROLLER_TSC_HS_SUPER_CLK_DIVIDER skip divider output */
+#define TEGRA234_CLK_TSC_REF			317U
+/** @brief Dummy clock to ensure minimum SoC voltage for fuse burning */
+#define TEGRA234_CLK_FUSE_BURN			318U
+/** @brief GBE PLL */
+#define TEGRA234_CLK_PLLGBE			319U
+/** @brief GBE PLL hardware power sequencer */
+#define TEGRA234_CLK_PLLGBE_HPS			320U
+/** @brief output of EMC CDB side A fixed (DIV4)  divider */
+#define TEGRA234_CLK_EMCSA_EMC			321U
+/** @brief output of EMC CDB side B fixed (DIV4)  divider */
+#define TEGRA234_CLK_EMCSB_EMC			322U
+/** @brief output of EMC CDB side C fixed (DIV4)  divider */
+#define TEGRA234_CLK_EMCSC_EMC			323U
+/** @brief output of EMC CDB side D fixed (DIV4)  divider */
+#define TEGRA234_CLK_EMCSD_EMC			324U
+/** @brief PLLE hardware power sequencer (overrides 'manual' programming of PLL) */
+#define TEGRA234_CLK_PLLE_HPS			326U
+/** @brief CLK_ENB_PLLREFE_OUT gate output */
+#define TEGRA234_CLK_PLLREFE_VCOOUT_GATED	327U
+/** @brief TEGRA234_CLK_SOR_SAFE clk source (PLLP_OUT0 divided by 17) */
+#define TEGRA234_CLK_PLLP_DIV17			328U
+/** @brief CLK_RST_CONTROLLER_CLK_SOURCE_SOC_THERM switch divider output */
+#define TEGRA234_CLK_SOC_THERM			329U
+/** @brief CLK_RST_CONTROLLER_CLK_SOURCE_TSENSE switch divider output */
+#define TEGRA234_CLK_TSENSE			330U
+/** @brief CLK_RST_CONTROLLER_CLK_SOURCE_SEU1 switch divider free running clk */
+#define TEGRA234_CLK_FR_SEU1			331U
+/** @brief NAFLL clock source for OFA */
+#define TEGRA234_CLK_NAFLL_OFA			333U
+/** @brief CLK_RST_CONTROLLER_CLK_SOURCE_OFA switch divider output */
+#define TEGRA234_CLK_OFA			334U
+/** @brief NAFLL clock source for SEU1 */
+#define TEGRA234_CLK_NAFLL_SEU1			335U
+/** @brief CLK_RST_CONTROLLER_CLK_SOURCE_SEU1 switch divider gated output */
+#define TEGRA234_CLK_SEU1			336U
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_SPI4 */
+#define TEGRA234_CLK_SPI4			337U
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_SPI5 */
+#define TEGRA234_CLK_SPI5			338U
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_DCE_CPU_NIC */
+#define TEGRA234_CLK_DCE_CPU_NIC		339U
+/** @brief output of divider CLK_RST_CONTROLLER_DCE_NIC_RATE */
+#define TEGRA234_CLK_DCE_NIC			340U
+/** @brief NAFLL clock source for DCE */
+#define TEGRA234_CLK_NAFLL_DCE			341U
+/** @brief Monitored branch of MPHY_L0_RX_ANA clock */
+#define TEGRA234_CLK_MPHY_L0_RX_ANA_M		342U
+/** @brief Monitored branch of MPHY_L1_RX_ANA clock */
+#define TEGRA234_CLK_MPHY_L1_RX_ANA_M		343U
+/** @brief ungated version of TX symbol clock after fixed 1/2 divider */
+#define TEGRA234_CLK_MPHY_L0_TX_PRE_SYMB	344U
+/** @brief output of divider CLK_RST_CONTROLLER_CLK_SOURCE_MPHY_L0_TX_LS_SYMB */
+#define TEGRA234_CLK_MPHY_L0_TX_LS_SYMB_DIV	345U
+/** @brief output of gate CLK_ENB_MPHY_L0_TX_2X_SYMB */
+#define TEGRA234_CLK_MPHY_L0_TX_2X_SYMB		346U
+/** @brief output of SW_MPHY_L0_TX_HS_SYMB divider in CLK_RST_CONTROLLER_MPHY_L0_TX_CLK_CTRL_0 */
+#define TEGRA234_CLK_MPHY_L0_TX_HS_SYMB_DIV	347U
+/** @brief output of SW_MPHY_L0_TX_LS_3XBIT divider in CLK_RST_CONTROLLER_MPHY_L0_TX_CLK_CTRL_0 */
+#define TEGRA234_CLK_MPHY_L0_TX_LS_3XBIT_DIV	348U
+/** @brief LS/HS divider mux SW_MPHY_L0_TX_LS_HS_SEL in CLK_RST_CONTROLLER_MPHY_L0_TX_CLK_CTRL_0 */
+#define TEGRA234_CLK_MPHY_L0_TX_MUX_SYMB_DIV	349U
+/** @brief Monitored branch of MPHY_L0_TX_SYMB clock */
+#define TEGRA234_CLK_MPHY_L0_TX_SYMB_M		350U
+/** @brief output of divider CLK_RST_CONTROLLER_CLK_SOURCE_MPHY_L0_RX_LS_SYMB */
+#define TEGRA234_CLK_MPHY_L0_RX_LS_SYMB_DIV	351U
+/** @brief output of SW_MPHY_L0_RX_HS_SYMB divider in CLK_RST_CONTROLLER_MPHY_L0_RX_CLK_CTRL_0 */
+#define TEGRA234_CLK_MPHY_L0_RX_HS_SYMB_DIV	352U
+/** @brief output of SW_MPHY_L0_RX_LS_BIT divider in  CLK_RST_CONTROLLER_MPHY_L0_RX_CLK_CTRL_0 */
+#define TEGRA234_CLK_MPHY_L0_RX_LS_BIT_DIV	353U
+/** @brief LS/HS divider mux SW_MPHY_L0_RX_LS_HS_SEL in CLK_RST_CONTROLLER_MPHY_L0_RX_CLK_CTRL_0 */
+#define TEGRA234_CLK_MPHY_L0_RX_MUX_SYMB_DIV	354U
+/** @brief Monitored branch of MPHY_L0_RX_SYMB clock */
+#define TEGRA234_CLK_MPHY_L0_RX_SYMB_M		355U
 /** @brief Monitored branch of MBGE0 RX input clock */
 #define TEGRA234_CLK_MGBE0_RX_INPUT_M		357U
 /** @brief Monitored branch of MBGE1 RX input clock */
···
 #define TEGRA234_CLK_MGBE2_RX_PCS_M		363U
 /** @brief Monitored branch of MGBE3 RX PCS mux output */
 #define TEGRA234_CLK_MGBE3_RX_PCS_M		364U
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_TACH1 */
+#define TEGRA234_CLK_TACH1			365U
+/** @brief GBE_UPHY_MGBES_APP_CLK switch divider gated output */
+#define TEGRA234_CLK_MGBES_APP			366U
+/** @brief Logical clk for setting GBE UPHY PLL2 TX_REF rate */
+#define TEGRA234_CLK_UPHY_GBE_PLL2_TX_REF	367U
+/** @brief Logical clk for setting GBE UPHY PLL2 XDIG rate */
+#define TEGRA234_CLK_UPHY_GBE_PLL2_XDIG		368U
 /** @brief RX PCS clock recovered from MGBE0 lane input */
 #define TEGRA234_CLK_MGBE0_RX_PCS_INPUT		369U
 /** @brief RX PCS clock recovered from MGBE1 lane input */
···
 #define TEGRA234_CLK_MGBE1_MAC_DIVIDER		385U
 /** @brief GBE_UPHY_MGBE1_MAC_CLK gate output */
 #define TEGRA234_CLK_MGBE1_MAC			386U
+/** @brief GBE_UPHY_MGBE1_MACSEC_CLK gate output */
+#define TEGRA234_CLK_MGBE1_MACSEC		387U
 /** @brief GBE_UPHY_MGBE1_EEE_PCS_CLK gate output */
 #define TEGRA234_CLK_MGBE1_EEE_PCS		388U
 /** @brief GBE_UPHY_MGBE1_APP_CLK gate output */
···
 #define TEGRA234_CLK_MGBE2_MAC_DIVIDER		394U
 /** @brief GBE_UPHY_MGBE2_MAC_CLK gate output */
 #define TEGRA234_CLK_MGBE2_MAC			395U
+/** @brief GBE_UPHY_MGBE2_MACSEC_CLK gate output */
+#define TEGRA234_CLK_MGBE2_MACSEC		396U
 /** @brief GBE_UPHY_MGBE2_EEE_PCS_CLK gate output */
 #define TEGRA234_CLK_MGBE2_EEE_PCS		397U
 /** @brief GBE_UPHY_MGBE2_APP_CLK gate output */
···
 #define TEGRA234_CLK_MGBE3_APP			407U
 /** @brief GBE_UPHY_MGBE3_PTP_REF_CLK divider gated output */
 #define TEGRA234_CLK_MGBE3_PTP_REF		408U
+/** @brief CLK_RST_CONTROLLER_CLK_SOURCE_GBE_RX_BYP switch divider output */
+#define TEGRA234_CLK_GBE_RX_BYP_REF		409U
+/** @brief CLK_RST_CONTROLLER_CLK_SOURCE_GBE_PLL0_MGMT switch divider output */
+#define TEGRA234_CLK_GBE_PLL0_MGMT		410U
+/** @brief CLK_RST_CONTROLLER_CLK_SOURCE_GBE_PLL1_MGMT switch divider output */
+#define TEGRA234_CLK_GBE_PLL1_MGMT		411U
+/** @brief CLK_RST_CONTROLLER_CLK_SOURCE_GBE_PLL2_MGMT switch divider output */
+#define TEGRA234_CLK_GBE_PLL2_MGMT		412U
+/** @brief output of gate CLK_ENB_EQOS_MACSEC_RX */
+#define TEGRA234_CLK_EQOS_MACSEC_RX		413U
+/** @brief output of gate CLK_ENB_EQOS_MACSEC_TX */
+#define TEGRA234_CLK_EQOS_MACSEC_TX		414U
+/** @brief CLK_RST_CONTROLLER_CLK_SOURCE_EQOS_TX_CLK divider ungated output */
+#define TEGRA234_CLK_EQOS_TX_DIVIDER		415U
+/** @brief CLK_RST_CONTROLLER_CLK_SOURCE_NVHS_PLL1_MGMT switch divider output */
+#define TEGRA234_CLK_NVHS_PLL1_MGMT		416U
+/** @brief CLK_RST_CONTROLLER_CLK_SOURCE_EMCHUB mux output */
+#define TEGRA234_CLK_EMCHUB			417U
+/** @brief clock recovered from I2S7 input */
+#define TEGRA234_CLK_I2S7_SYNC_INPUT		418U
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_AUDIO_SYNC_CLK_I2S7 */
+#define TEGRA234_CLK_SYNC_I2S7			419U
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_I2S7 */
+#define TEGRA234_CLK_I2S7			420U
+/** @brief Monitored output of I2S7 pad macro mux */
+#define TEGRA234_CLK_I2S7_PAD_M			421U
+/** @brief clock recovered from I2S8 input */
+#define TEGRA234_CLK_I2S8_SYNC_INPUT		422U
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_AUDIO_SYNC_CLK_I2S8 */
+#define TEGRA234_CLK_SYNC_I2S8			423U
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_I2S8 */
+#define TEGRA234_CLK_I2S8			424U
+/** @brief Monitored output of I2S8 pad macro mux */
+#define TEGRA234_CLK_I2S8_PAD_M			425U
+/** @brief NAFLL clock source for GPU GPC0 */
+#define TEGRA234_CLK_NAFLL_GPC0			426U
+/** @brief NAFLL clock source for GPU GPC1 */
+#define TEGRA234_CLK_NAFLL_GPC1			427U
+/** @brief NAFLL clock source for GPU SYSCLK */
+#define TEGRA234_CLK_NAFLL_GPUSYS		428U
+/** @brief NAFLL clock source for CPU cluster 0 DSUCLK */
+#define TEGRA234_CLK_NAFLL_DSU0			429U /* TODO: remove */
+#define TEGRA234_CLK_NAFLL_CLUSTER0_DSU		429U
+/** @brief NAFLL clock source for CPU cluster 1 DSUCLK */
+#define TEGRA234_CLK_NAFLL_DSU1			430U /* TODO: remove */
+#define TEGRA234_CLK_NAFLL_CLUSTER1_DSU		430U
+/** @brief NAFLL clock source for CPU cluster 2 DSUCLK */
+#define TEGRA234_CLK_NAFLL_DSU2			431U /* TODO: remove */
+#define TEGRA234_CLK_NAFLL_CLUSTER2_DSU		431U
+/** @brief output of gate CLK_ENB_SCE_CPU */
+#define TEGRA234_CLK_SCE_CPU			432U
+/** @brief output of gate CLK_ENB_RCE_CPU */
+#define TEGRA234_CLK_RCE_CPU			433U
+/** @brief output of gate CLK_ENB_DCE_CPU */
+#define TEGRA234_CLK_DCE_CPU			434U
+/** @brief DSIPLL VCO output */
+#define TEGRA234_CLK_DSIPLL_VCO			435U
+/** @brief DSIPLL SYNC_CLKOUTP/N differential output */
+#define TEGRA234_CLK_DSIPLL_CLKOUTPN		436U
+/** @brief DSIPLL SYNC_CLKOUTA output */
+#define TEGRA234_CLK_DSIPLL_CLKOUTA		437U
+/** @brief SPPLL0 VCO output */
+#define TEGRA234_CLK_SPPLL0_VCO			438U
+/** @brief SPPLL0 SYNC_CLKOUTP/N differential output */
+#define TEGRA234_CLK_SPPLL0_CLKOUTPN		439U
+/** @brief SPPLL0 SYNC_CLKOUTA output */
+#define TEGRA234_CLK_SPPLL0_CLKOUTA		440U
+/** @brief SPPLL0 SYNC_CLKOUTB output */
+#define TEGRA234_CLK_SPPLL0_CLKOUTB		441U
+/** @brief SPPLL0 CLKOUT_DIVBY10 output */
+#define TEGRA234_CLK_SPPLL0_DIV10		442U
+/** @brief SPPLL0 CLKOUT_DIVBY25 output */
+#define TEGRA234_CLK_SPPLL0_DIV25		443U
+/** @brief SPPLL0 CLKOUT_DIVBY27P/N differential output */
+#define TEGRA234_CLK_SPPLL0_DIV27PN		444U
+/** @brief SPPLL1 VCO output */
+#define TEGRA234_CLK_SPPLL1_VCO			445U
+/** @brief SPPLL1 SYNC_CLKOUTP/N differential output */
+#define TEGRA234_CLK_SPPLL1_CLKOUTPN		446U
+/** @brief SPPLL1 CLKOUT_DIVBY27P/N differential output */
+#define TEGRA234_CLK_SPPLL1_DIV27PN		447U
+/** @brief VPLL0 reference clock */
+#define TEGRA234_CLK_VPLL0_REF			448U
+/** @brief VPLL0 */
+#define TEGRA234_CLK_VPLL0			449U
+/** @brief VPLL1 */
+#define TEGRA234_CLK_VPLL1			450U
+/** @brief NVDISPLAY_P0_CLK reference select */
+#define TEGRA234_CLK_NVDISPLAY_P0_REF		451U
+/** @brief RG0_PCLK */
+#define TEGRA234_CLK_RG0			452U
+/** @brief RG1_PCLK */
+#define TEGRA234_CLK_RG1			453U
+/** @brief DISPPLL output */
+#define TEGRA234_CLK_DISPPLL			454U
+/** @brief DISPHUBPLL output */
+#define TEGRA234_CLK_DISPHUBPLL			455U
+/** @brief CLK_RST_CONTROLLER_DSI_LP_SWITCH_DIVIDER switch divider output (dsi_lp_clk) */
+#define TEGRA234_CLK_DSI_LP			456U
 /** @brief CLK_RST_CONTROLLER_AZA2XBITCLK_OUT_SWITCH_DIVIDER switch divider output (aza_2xbitclk) */
 #define TEGRA234_CLK_AZA_2XBIT			457U
 /** @brief aza_2xbitclk / 2 (aza_bitclk) */
 #define TEGRA234_CLK_AZA_BIT			458U
+/** @brief SWITCH_DSI_CORE_PIXEL_MISC_DSI_CORE_CLK_SRC switch output (dsi_core_clk) */
+#define TEGRA234_CLK_DSI_CORE			459U
+/** @brief Output of mux controlled by pkt_wr_fifo_signal from dsi (dsi_pixel_clk) */
+#define TEGRA234_CLK_DSI_PIXEL			460U
+/** @brief Output of mux controlled by disp_2clk_sor0_dp_sel (pre_sor0_clk) */
+#define TEGRA234_CLK_PRE_SOR0			461U
+/** @brief Output of mux controlled by disp_2clk_sor1_dp_sel (pre_sor1_clk) */
+#define TEGRA234_CLK_PRE_SOR1			462U
+/** @brief CLK_RST_CONTROLLER_LINK_REFCLK_CFG__0 output */
+#define TEGRA234_CLK_DP_LINK_REF		463U
+/** @brief Link clock input from DP macro brick PLL */
+#define TEGRA234_CLK_SOR_LINKA_INPUT		464U
+/** @brief SOR AFIFO clock outut */
+#define TEGRA234_CLK_SOR_LINKA_AFIFO		465U
+/** @brief Monitored branch of linka_afifo_clk */
+#define TEGRA234_CLK_SOR_LINKA_AFIFO_M		466U
+/** @brief Monitored branch of rg0_pclk */
+#define TEGRA234_CLK_RG0_M			467U
+/** @brief Monitored branch of rg1_pclk */
+#define TEGRA234_CLK_RG1_M			468U
+/** @brief Monitored branch of sor0_clk */
+#define TEGRA234_CLK_SOR0_M			469U
+/** @brief Monitored branch of sor1_clk */
+#define TEGRA234_CLK_SOR1_M			470U
+/** @brief EMC PLLHUB output */
+#define TEGRA234_CLK_PLLHUB			471U
+/** @brief output of fixed (DIV2) MC HUB divider */
+#define TEGRA234_CLK_MCHUB			472U
+/** @brief output of divider controlled by EMC side A MC_EMC_SAFE_SAME_FREQ */
+#define TEGRA234_CLK_EMCSA_MC			473U
+/** @brief output of divider controlled by EMC side B MC_EMC_SAFE_SAME_FREQ */
+#define TEGRA234_CLK_EMCSB_MC			474U
+/** @brief output of divider controlled by EMC side C MC_EMC_SAFE_SAME_FREQ */
+#define TEGRA234_CLK_EMCSC_MC			475U
+/** @brief output of divider controlled by EMC side D MC_EMC_SAFE_SAME_FREQ */
+#define TEGRA234_CLK_EMCSD_MC			476U
+
+/** @} */
 
 #endif

include/dt-bindings/memory/tegra234-mc.h

···
 #define TEGRA234_SID_INVALID		0x00
 #define TEGRA234_SID_PASSTHROUGH	0x7f
 
+/* ISO stream IDs */
+#define TEGRA234_SID_ISO_NVDISPLAY	0x01
+#define TEGRA234_SID_ISO_VI		0x02
+#define TEGRA234_SID_ISO_VIFALC		0x03
+#define TEGRA234_SID_ISO_VI2		0x04
+#define TEGRA234_SID_ISO_VI2FALC	0x05
+#define TEGRA234_SID_ISO_VI_VM2		0x06
+#define TEGRA234_SID_ISO_VI2_VM2	0x07
+
 /* NISO0 stream IDs */
-#define TEGRA234_SID_APE	0x02
-#define TEGRA234_SID_HDA	0x03
-#define TEGRA234_SID_GPCDMA	0x04
-#define TEGRA234_SID_MGBE	0x06
-#define TEGRA234_SID_PCIE0	0x12
-#define TEGRA234_SID_PCIE4	0x13
-#define TEGRA234_SID_PCIE5	0x14
-#define TEGRA234_SID_PCIE6	0x15
-#define TEGRA234_SID_PCIE9	0x1f
-#define TEGRA234_SID_MGBE_VF1	0x49
-#define TEGRA234_SID_MGBE_VF2	0x4a
-#define TEGRA234_SID_MGBE_VF3	0x4b
+#define TEGRA234_SID_AON		0x01
+#define TEGRA234_SID_APE		0x02
+#define TEGRA234_SID_HDA		0x03
+#define TEGRA234_SID_GPCDMA		0x04
+#define TEGRA234_SID_ETR		0x05
+#define TEGRA234_SID_MGBE		0x06
+#define TEGRA234_SID_NVDISPLAY		0x07
+#define TEGRA234_SID_DCE		0x08
+#define TEGRA234_SID_PSC		0x09
+#define TEGRA234_SID_RCE		0x0a
+#define TEGRA234_SID_SCE		0x0b
+#define TEGRA234_SID_UFSHC		0x0c
+#define TEGRA234_SID_APE_1		0x0d
+#define TEGRA234_SID_GPCDMA_1		0x0e
+#define TEGRA234_SID_GPCDMA_2		0x0f
+#define TEGRA234_SID_GPCDMA_3		0x10
+#define TEGRA234_SID_GPCDMA_4		0x11
+#define TEGRA234_SID_PCIE0		0x12
+#define TEGRA234_SID_PCIE4		0x13
+#define TEGRA234_SID_PCIE5		0x14
+#define TEGRA234_SID_PCIE6		0x15
+#define TEGRA234_SID_RCE_VM2		0x16
+#define TEGRA234_SID_RCE_SERVER		0x17
+#define TEGRA234_SID_SMMU_TEST		0x18
+#define TEGRA234_SID_UFS_1		0x19
+#define TEGRA234_SID_UFS_2		0x1a
+#define TEGRA234_SID_UFS_3		0x1b
+#define TEGRA234_SID_UFS_4		0x1c
+#define TEGRA234_SID_UFS_5		0x1d
+#define TEGRA234_SID_UFS_6		0x1e
+#define TEGRA234_SID_PCIE9		0x1f
+#define TEGRA234_SID_VSE_GPCDMA_VM0	0x20
+#define TEGRA234_SID_VSE_GPCDMA_VM1	0x21
+#define TEGRA234_SID_VSE_GPCDMA_VM2	0x22
+#define TEGRA234_SID_NVDLA1		0x23
+#define TEGRA234_SID_NVENC		0x24
+#define TEGRA234_SID_NVJPG1		0x25
+#define TEGRA234_SID_OFA		0x26
+#define TEGRA234_SID_MGBE_VF1		0x49
+#define TEGRA234_SID_MGBE_VF2		0x4a
+#define TEGRA234_SID_MGBE_VF3		0x4b
+#define TEGRA234_SID_MGBE_VF4		0x4c
+#define TEGRA234_SID_MGBE_VF5		0x4d
+#define TEGRA234_SID_MGBE_VF6		0x4e
+#define TEGRA234_SID_MGBE_VF7		0x4f
+#define TEGRA234_SID_MGBE_VF8		0x50
+#define TEGRA234_SID_MGBE_VF9		0x51
+#define TEGRA234_SID_MGBE_VF10		0x52
+#define TEGRA234_SID_MGBE_VF11		0x53
+#define TEGRA234_SID_MGBE_VF12		0x54
+#define TEGRA234_SID_MGBE_VF13		0x55
+#define TEGRA234_SID_MGBE_VF14		0x56
+#define TEGRA234_SID_MGBE_VF15		0x57
+#define TEGRA234_SID_MGBE_VF16		0x58
+#define TEGRA234_SID_MGBE_VF17		0x59
+#define TEGRA234_SID_MGBE_VF18		0x5a
+#define TEGRA234_SID_MGBE_VF19		0x5b
+#define TEGRA234_SID_MGBE_VF20		0x5c
+#define TEGRA234_SID_APE_2		0x5e
+#define TEGRA234_SID_APE_3		0x5f
+#define TEGRA234_SID_UFS_7		0x60
+#define TEGRA234_SID_UFS_8		0x61
+#define TEGRA234_SID_UFS_9		0x62
+#define TEGRA234_SID_UFS_10		0x63
+#define TEGRA234_SID_UFS_11		0x64
+#define TEGRA234_SID_UFS_12		0x65
+#define TEGRA234_SID_UFS_13		0x66
+#define TEGRA234_SID_UFS_14		0x67
+#define TEGRA234_SID_UFS_15		0x68
+#define TEGRA234_SID_UFS_16		0x69
+#define TEGRA234_SID_UFS_17		0x6a
+#define TEGRA234_SID_UFS_18		0x6b
+#define TEGRA234_SID_UFS_19		0x6c
+#define TEGRA234_SID_UFS_20		0x6d
+#define TEGRA234_SID_GPCDMA_5		0x6e
+#define TEGRA234_SID_GPCDMA_6		0x6f
+#define TEGRA234_SID_GPCDMA_7		0x70
+#define TEGRA234_SID_GPCDMA_8		0x71
+#define TEGRA234_SID_GPCDMA_9		0x72
 
 /* NISO1 stream IDs */
-#define TEGRA234_SID_SDMMC4	0x02
-#define TEGRA234_SID_PCIE1	0x05
-#define TEGRA234_SID_PCIE2	0x06
-#define TEGRA234_SID_PCIE3	0x07
-#define TEGRA234_SID_PCIE7	0x08
-#define TEGRA234_SID_PCIE8	0x09
-#define TEGRA234_SID_PCIE10	0x0b
-#define TEGRA234_SID_BPMP	0x10
-#define TEGRA234_SID_HOST1X	0x27
-#define TEGRA234_SID_VIC	0x34
+#define TEGRA234_SID_SDMMC1A		0x01
+#define TEGRA234_SID_SDMMC4		0x02
+#define TEGRA234_SID_EQOS		0x03
+#define TEGRA234_SID_HWMP_PMA		0x04
+#define TEGRA234_SID_PCIE1		0x05
+#define TEGRA234_SID_PCIE2		0x06
+#define TEGRA234_SID_PCIE3		0x07
+#define TEGRA234_SID_PCIE7		0x08
+#define TEGRA234_SID_PCIE8		0x09
+#define TEGRA234_SID_PCIE10		0x0b
+#define TEGRA234_SID_QSPI0		0x0c
+#define TEGRA234_SID_QSPI1		0x0d
+#define TEGRA234_SID_XUSB_HOST		0x0e
+#define TEGRA234_SID_XUSB_DEV		0x0f
+#define TEGRA234_SID_BPMP		0x10
+#define TEGRA234_SID_FSI		0x11
+#define TEGRA234_SID_PVA0_VM0		0x12
+#define TEGRA234_SID_PVA0_VM1		0x13
+#define TEGRA234_SID_PVA0_VM2		0x14
+#define TEGRA234_SID_PVA0_VM3		0x15
+#define TEGRA234_SID_PVA0_VM4		0x16
+#define TEGRA234_SID_PVA0_VM5		0x17
+#define TEGRA234_SID_PVA0_VM6		0x18
+#define TEGRA234_SID_PVA0_VM7		0x19
+#define TEGRA234_SID_XUSB_VF0		0x1a
+#define TEGRA234_SID_XUSB_VF1		0x1b
+#define TEGRA234_SID_XUSB_VF2		0x1c
+#define TEGRA234_SID_XUSB_VF3		0x1d
+#define TEGRA234_SID_EQOS_VF1		0x1e
+#define TEGRA234_SID_EQOS_VF2		0x1f
+#define TEGRA234_SID_EQOS_VF3		0x20
+#define TEGRA234_SID_EQOS_VF4		0x21
+#define TEGRA234_SID_ISP_VM2		0x22
+#define TEGRA234_SID_HOST1X		0x27
+#define TEGRA234_SID_ISP		0x28
+#define TEGRA234_SID_NVDEC		0x29
+#define TEGRA234_SID_NVJPG		0x2a
+#define TEGRA234_SID_NVDLA0		0x2b
+#define TEGRA234_SID_PVA0		0x2c
+#define TEGRA234_SID_SES_SE0		0x2d
+#define TEGRA234_SID_SES_SE1		0x2e
+#define TEGRA234_SID_SES_SE2		0x2f
+#define TEGRA234_SID_SEU1_SE0		0x30
+#define TEGRA234_SID_SEU1_SE1		0x31
+#define TEGRA234_SID_SEU1_SE2		0x32
+#define TEGRA234_SID_TSEC		0x33
+#define TEGRA234_SID_VIC		0x34
+#define TEGRA234_SID_HC_VM0		0x3d
+#define TEGRA234_SID_HC_VM1		0x3e
+#define TEGRA234_SID_HC_VM2		0x3f
+#define TEGRA234_SID_HC_VM3		0x40
+#define TEGRA234_SID_HC_VM4		0x41
+#define TEGRA234_SID_HC_VM5		0x42
+#define TEGRA234_SID_HC_VM6		0x43
+#define TEGRA234_SID_HC_VM7		0x44
+#define TEGRA234_SID_SE_VM0		0x45
+#define TEGRA234_SID_SE_VM1		0x46
+#define TEGRA234_SID_SE_VM2		0x47
+#define TEGRA234_SID_ISPFALC		0x48
+#define TEGRA234_SID_NISO1_SMMU_TEST	0x49
+#define TEGRA234_SID_TSEC_VM0		0x4a
 
 /* Shared stream IDs */
 #define TEGRA234_SID_HOST1X_CTX0	0x35
···
  * memory client IDs
  */
 
+/* Misses from System Memory Management Unit (SMMU) Page Table Cache (PTC) */
+#define TEGRA234_MEMORY_CLIENT_PTCR 0x00
+/* MSS internal memqual MIU7 read clients */
+#define TEGRA234_MEMORY_CLIENT_MIU7R 0x01
+/* MSS internal memqual MIU7 write clients */
+#define TEGRA234_MEMORY_CLIENT_MIU7W 0x02
+/* MSS internal memqual MIU8 read clients */
+#define TEGRA234_MEMORY_CLIENT_MIU8R 0x03
+/* MSS internal memqual MIU8 write clients */
+#define TEGRA234_MEMORY_CLIENT_MIU8W 0x04
+/* MSS internal memqual MIU9 read clients */
+#define TEGRA234_MEMORY_CLIENT_MIU9R 0x05
+/* MSS internal memqual MIU9 write clients */
+#define TEGRA234_MEMORY_CLIENT_MIU9W 0x06
+/* MSS internal memqual MIU10 read clients */
+#define TEGRA234_MEMORY_CLIENT_MIU10R 0x07
+/* MSS internal memqual MIU10 write clients */
+#define TEGRA234_MEMORY_CLIENT_MIU10W 0x08
+/* MSS internal memqual MIU11 read clients */
+#define TEGRA234_MEMORY_CLIENT_MIU11R 0x09
+/* MSS internal memqual MIU11 write clients */
+#define TEGRA234_MEMORY_CLIENT_MIU11W 0x0a
+/* MSS internal memqual MIU12 read clients */
+#define TEGRA234_MEMORY_CLIENT_MIU12R 0x0b
+/* MSS internal memqual MIU12 write clients */
+#define TEGRA234_MEMORY_CLIENT_MIU12W 0x0c
+/* MSS internal memqual MIU13 read clients */
+#define TEGRA234_MEMORY_CLIENT_MIU13R 0x0d
+/* MSS internal memqual MIU13 write clients */
+#define TEGRA234_MEMORY_CLIENT_MIU13W 0x0e
+#define TEGRA234_MEMORY_CLIENT_NVL5RHP 0x13
+#define TEGRA234_MEMORY_CLIENT_NVL5R 0x14
 /* High-definition audio (HDA) read clients */
 #define TEGRA234_MEMORY_CLIENT_HDAR 0x15
+/* Host channel data read clients */
 #define TEGRA234_MEMORY_CLIENT_HOST1XDMAR 0x16
+#define TEGRA234_MEMORY_CLIENT_NVL5W 0x17
+#define TEGRA234_MEMORY_CLIENT_NVL6RHP 0x18
+#define TEGRA234_MEMORY_CLIENT_NVL6R 0x19
+#define TEGRA234_MEMORY_CLIENT_NVL6W 0x1a
+#define TEGRA234_MEMORY_CLIENT_NVL7RHP 0x1b
+#define TEGRA234_MEMORY_CLIENT_NVENCSRD 0x1c
+#define TEGRA234_MEMORY_CLIENT_NVL7R 0x1d
+#define TEGRA234_MEMORY_CLIENT_NVL7W 0x1e
+#define TEGRA234_MEMORY_CLIENT_NVL8RHP 0x20
+#define TEGRA234_MEMORY_CLIENT_NVL8R 0x21
+#define TEGRA234_MEMORY_CLIENT_NVL8W 0x22
+#define TEGRA234_MEMORY_CLIENT_NVL9RHP 0x23
+#define TEGRA234_MEMORY_CLIENT_NVL9R 0x24
+#define TEGRA234_MEMORY_CLIENT_NVL9W 0x25
 /* PCIE6 read clients */
 #define TEGRA234_MEMORY_CLIENT_PCIE6AR 0x28
 /* PCIE6 write clients */
 #define TEGRA234_MEMORY_CLIENT_PCIE6AW 0x29
 /* PCIE7 read clients */
 #define TEGRA234_MEMORY_CLIENT_PCIE7AR 0x2a
+#define TEGRA234_MEMORY_CLIENT_NVENCSWR 0x2b
+/* DLA0ARDB read clients */
+#define TEGRA234_MEMORY_CLIENT_DLA0RDB 0x2c
+/* DLA0ARDB1 read clients */
+#define TEGRA234_MEMORY_CLIENT_DLA0RDB1 0x2d
+/* DLA0 writes */
+#define TEGRA234_MEMORY_CLIENT_DLA0WRB 0x2e
+/* DLA1ARDB read clients */
+#define TEGRA234_MEMORY_CLIENT_DLA1RDB 0x2f
 /* PCIE7 write clients */
 #define TEGRA234_MEMORY_CLIENT_PCIE7AW 0x30
 /* PCIE8 read clients */
 #define TEGRA234_MEMORY_CLIENT_PCIE8AR 0x32
 /* High-definition audio (HDA) write clients */
 #define TEGRA234_MEMORY_CLIENT_HDAW 0x35
+/* Writes from Cortex-A9 4 CPU cores via the L2 cache */
+#define TEGRA234_MEMORY_CLIENT_MPCOREW 0x39
+/* OFAA client */
+#define TEGRA234_MEMORY_CLIENT_OFAR1 0x3a
 /* PCIE8 write clients */
 #define TEGRA234_MEMORY_CLIENT_PCIE8AW 0x3b
 /* PCIE9 read clients */
···
 #define TEGRA234_MEMORY_CLIENT_PCIE10AR 0x3f
 /* PCIE10 write clients */
 #define TEGRA234_MEMORY_CLIENT_PCIE10AW 0x40
+/* ISP read client for Crossbar A */
+#define TEGRA234_MEMORY_CLIENT_ISPRA 0x44
+/* ISP read client 1 for Crossbar A */
+#define TEGRA234_MEMORY_CLIENT_ISPFALR 0x45
+/* ISP Write client for Crossbar A */
+#define TEGRA234_MEMORY_CLIENT_ISPWA 0x46
+/* ISP Write client Crossbar B */
+#define TEGRA234_MEMORY_CLIENT_ISPWB 0x47
 /* PCIE10r1 read clients */
 #define TEGRA234_MEMORY_CLIENT_PCIE10AR1 0x48
 /* PCIE7r1 read clients */
 #define TEGRA234_MEMORY_CLIENT_PCIE7AR1 0x49
+/* XUSB_HOST read clients */
+#define TEGRA234_MEMORY_CLIENT_XUSB_HOSTR 0x4a
+/* XUSB_HOST write clients */
+#define TEGRA234_MEMORY_CLIENT_XUSB_HOSTW 0x4b
+/* XUSB read clients */
+#define TEGRA234_MEMORY_CLIENT_XUSB_DEVR 0x4c
+/* XUSB_DEV write clients */
+#define TEGRA234_MEMORY_CLIENT_XUSB_DEVW 0x4d
+/* TSEC Memory Return Data Client Description */
+#define TEGRA234_MEMORY_CLIENT_TSECSRD 0x54
+/* TSEC Memory Write Client Description */
+#define TEGRA234_MEMORY_CLIENT_TSECSWR 0x55
+/* XSPI writes */
+#define TEGRA234_MEMORY_CLIENT_XSPI1W 0x56
 /* MGBE0 read client */
 #define TEGRA234_MEMORY_CLIENT_MGBEARD 0x58
 /* MGBEB read client */
···
 #define TEGRA234_MEMORY_CLIENT_MGBEDRD 0x5b
 /* MGBE0 write client */
 #define TEGRA234_MEMORY_CLIENT_MGBEAWR 0x5c
+/* OFAA client */
+#define TEGRA234_MEMORY_CLIENT_OFAR 0x5d
+/* OFAA writes */
+#define TEGRA234_MEMORY_CLIENT_OFAW 0x5e
 /* MGBEB write client */
 #define TEGRA234_MEMORY_CLIENT_MGBEBWR 0x5f
+/* sdmmca memory read client */
+#define TEGRA234_MEMORY_CLIENT_SDMMCRA 0x60
 /* MGBEC write client */
 #define TEGRA234_MEMORY_CLIENT_MGBECWR 0x61
 /* sdmmcd memory read client */
 #define TEGRA234_MEMORY_CLIENT_SDMMCRAB 0x63
+/* sdmmca memory write client */
+#define TEGRA234_MEMORY_CLIENT_SDMMCWA 0x64
 /* MGBED write client */
 #define TEGRA234_MEMORY_CLIENT_MGBEDWR 0x65
 /* sdmmcd memory write client */
 #define TEGRA234_MEMORY_CLIENT_SDMMCWAB 0x67
+/* SE Memory Return Data Client Description */
+#define TEGRA234_MEMORY_CLIENT_SEU1RD 0x68
+/* SE Memory Write Client Description */
+#define TEGRA234_MEMORY_CLIENT_SUE1WR 0x69
 #define TEGRA234_MEMORY_CLIENT_VICSRD 0x6c
 #define TEGRA234_MEMORY_CLIENT_VICSWR 0x6d
+/* DLA1ARDB1 read clients */
+#define TEGRA234_MEMORY_CLIENT_DLA1RDB1 0x6e
+/* DLA1 writes */
+#define TEGRA234_MEMORY_CLIENT_DLA1WRB 0x6f
+/* VI FLACON read clients */
+#define TEGRA234_MEMORY_CLIENT_VI2FALR 0x71
+/* VI Write client */
+#define TEGRA234_MEMORY_CLIENT_VI2W 0x70
+/* VI Write client */
+#define TEGRA234_MEMORY_CLIENT_VIW 0x72
+/* NISO display read client */
+#define TEGRA234_MEMORY_CLIENT_NVDISPNISOR 0x73
+/* NVDISPNISO writes */
+#define TEGRA234_MEMORY_CLIENT_NVDISPNISOW 0x74
+/* XSPI client */
+#define TEGRA234_MEMORY_CLIENT_XSPI0R 0x75
+/* XSPI writes */
+#define TEGRA234_MEMORY_CLIENT_XSPI0W 0x76
+/* XSPI client */
+#define TEGRA234_MEMORY_CLIENT_XSPI1R 0x77
+#define TEGRA234_MEMORY_CLIENT_NVDECSRD 0x78
+#define TEGRA234_MEMORY_CLIENT_NVDECSWR 0x79
+/* Audio Processing (APE) engine read clients */
+#define TEGRA234_MEMORY_CLIENT_APER 0x7a
+/* Audio Processing (APE) engine write clients */
+#define TEGRA234_MEMORY_CLIENT_APEW 0x7b
+/* VI2FAL writes */
+#define TEGRA234_MEMORY_CLIENT_VI2FALW 0x7c
+#define TEGRA234_MEMORY_CLIENT_NVJPGSRD 0x7e
+#define TEGRA234_MEMORY_CLIENT_NVJPGSWR 0x7f
+/* SE Memory Return Data Client Description */
+#define TEGRA234_MEMORY_CLIENT_SESRD 0x80
+/* SE Memory Write Client Description */
+#define TEGRA234_MEMORY_CLIENT_SESWR 0x81
+/* AXI AP and DFD-AUX0/1 read clients Both share the same interface on the on MSS */
+#define TEGRA234_MEMORY_CLIENT_AXIAPR 0x82
+/* AXI AP and DFD-AUX0/1 write clients Both sahre the same interface on MSS */
+#define TEGRA234_MEMORY_CLIENT_AXIAPW 0x83
+/* ETR read clients */
+#define TEGRA234_MEMORY_CLIENT_ETRR 0x84
+/* ETR write clients */
+#define TEGRA234_MEMORY_CLIENT_ETRW 0x85
+/* AXI Switch read client */
+#define TEGRA234_MEMORY_CLIENT_AXISR 0x8c
+/* AXI Switch write client */
+#define TEGRA234_MEMORY_CLIENT_AXISW 0x8d
+/* EQOS read client */
+#define TEGRA234_MEMORY_CLIENT_EQOSR 0x8e
+/* EQOS write client */
+#define TEGRA234_MEMORY_CLIENT_EQOSW 0x8f
+/* UFSHC read client */
+#define TEGRA234_MEMORY_CLIENT_UFSHCR 0x90
+/* UFSHC write client */
+#define TEGRA234_MEMORY_CLIENT_UFSHCW 0x91
+/* NVDISPLAY read client */
+#define TEGRA234_MEMORY_CLIENT_NVDISPLAYR 0x92
 /* BPMP read client */
 #define TEGRA234_MEMORY_CLIENT_BPMPR 0x93
 /* BPMP write client */
···
 #define TEGRA234_MEMORY_CLIENT_BPMPDMAR 0x95
 /* BPMPDMA write client */
 #define TEGRA234_MEMORY_CLIENT_BPMPDMAW 0x96
+/* AON read client */
+#define TEGRA234_MEMORY_CLIENT_AONR 0x97
+/* AON write client */
+#define TEGRA234_MEMORY_CLIENT_AONW 0x98
+/* AONDMA read client */
+#define TEGRA234_MEMORY_CLIENT_AONDMAR 0x99
+/* AONDMA write client */
+#define TEGRA234_MEMORY_CLIENT_AONDMAW 0x9a
+/* SCE read client */
+#define TEGRA234_MEMORY_CLIENT_SCER 0x9b
+/* SCE write client */
+#define TEGRA234_MEMORY_CLIENT_SCEW 0x9c
+/* SCEDMA read client */
+#define TEGRA234_MEMORY_CLIENT_SCEDMAR 0x9d
+/* SCEDMA write client */
+#define TEGRA234_MEMORY_CLIENT_SCEDMAW 0x9e
 /* APEDMA read client */
 #define TEGRA234_MEMORY_CLIENT_APEDMAR 0x9f
 /* APEDMA write client */
 #define TEGRA234_MEMORY_CLIENT_APEDMAW 0xa0
+/* NVDISPLAY read client instance 2 */
+#define TEGRA234_MEMORY_CLIENT_NVDISPLAYR1 0xa1
+#define TEGRA234_MEMORY_CLIENT_VICSRD1 0xa2
+/* MSS internal memqual MIU0 read clients */
+#define TEGRA234_MEMORY_CLIENT_MIU0R 0xa6
+/* MSS internal memqual MIU0 write clients */
+#define TEGRA234_MEMORY_CLIENT_MIU0W 0xa7
+/* MSS internal memqual MIU1 read clients */
+#define TEGRA234_MEMORY_CLIENT_MIU1R 0xa8
+/* MSS internal memqual MIU1 write clients */
+#define TEGRA234_MEMORY_CLIENT_MIU1W 0xa9
+/* MSS internal memqual MIU2 read clients */
+#define TEGRA234_MEMORY_CLIENT_MIU2R 0xae
+/* MSS internal memqual MIU2 write clients */
+#define TEGRA234_MEMORY_CLIENT_MIU2W 0xaf
+/* MSS internal memqual MIU3 read clients */
+#define TEGRA234_MEMORY_CLIENT_MIU3R 0xb0
+/* MSS internal memqual MIU3 write clients */
+#define TEGRA234_MEMORY_CLIENT_MIU3W 0xb1
+/* MSS internal memqual MIU4 read clients */
+#define TEGRA234_MEMORY_CLIENT_MIU4R 0xb2
+/* MSS internal memqual MIU4 write clients */
+#define TEGRA234_MEMORY_CLIENT_MIU4W 0xb3
+#define TEGRA234_MEMORY_CLIENT_DPMUR 0xb4
+#define TEGRA234_MEMORY_CLIENT_DPMUW 0xb5
+#define TEGRA234_MEMORY_CLIENT_NVL0R 0xb6
+#define TEGRA234_MEMORY_CLIENT_NVL0W 0xb7
+#define TEGRA234_MEMORY_CLIENT_NVL1R 0xb8
+#define TEGRA234_MEMORY_CLIENT_NVL1W 0xb9
+#define TEGRA234_MEMORY_CLIENT_NVL2R 0xba
+#define TEGRA234_MEMORY_CLIENT_NVL2W 0xbb
+/* VI FLACON read clients */
+#define TEGRA234_MEMORY_CLIENT_VIFALR 0xbc
+/* VIFAL write clients */
+#define TEGRA234_MEMORY_CLIENT_VIFALW 0xbd
+/* DLA0ARDA read clients */
+#define TEGRA234_MEMORY_CLIENT_DLA0RDA 0xbe
+/* DLA0 Falcon read clients */
+#define TEGRA234_MEMORY_CLIENT_DLA0FALRDB 0xbf
+/* DLA0 write clients */
+#define TEGRA234_MEMORY_CLIENT_DLA0WRA 0xc0
+/* DLA0 write clients */
+#define TEGRA234_MEMORY_CLIENT_DLA0FALWRB 0xc1
+/* DLA1ARDA read clients */
+#define TEGRA234_MEMORY_CLIENT_DLA1RDA 0xc2
+/* DLA1 Falcon read clients */
+#define TEGRA234_MEMORY_CLIENT_DLA1FALRDB 0xc3
+/* DLA1 write clients */
+#define TEGRA234_MEMORY_CLIENT_DLA1WRA 0xc4
+/* DLA1 write clients */
+#define TEGRA234_MEMORY_CLIENT_DLA1FALWRB 0xc5
+/* PVA0RDA read clients */
+#define TEGRA234_MEMORY_CLIENT_PVA0RDA 0xc6
+/* PVA0RDB read clients */
+#define TEGRA234_MEMORY_CLIENT_PVA0RDB 0xc7
+/* PVA0RDC read clients */
+#define TEGRA234_MEMORY_CLIENT_PVA0RDC 0xc8
+/* PVA0WRA write clients */
+#define TEGRA234_MEMORY_CLIENT_PVA0WRA 0xc9
+/* PVA0WRB write clients */
+#define TEGRA234_MEMORY_CLIENT_PVA0WRB 0xca
+/* PVA0WRC write clients */
+#define TEGRA234_MEMORY_CLIENT_PVA0WRC 0xcb
+/* RCE read client */
+#define TEGRA234_MEMORY_CLIENT_RCER 0xd2
+/* RCE write client */
+#define TEGRA234_MEMORY_CLIENT_RCEW 0xd3
+/* RCEDMA read client */
+#define TEGRA234_MEMORY_CLIENT_RCEDMAR 0xd4
+/* RCEDMA write client */
+#define TEGRA234_MEMORY_CLIENT_RCEDMAW 0xd5
 /* PCIE0 read clients */
 #define TEGRA234_MEMORY_CLIENT_PCIE0R 0xd8
 /* PCIE0 write clients */
···
 #define TEGRA234_MEMORY_CLIENT_PCIE5R 0xe2
 /* PCIE5 write clients */
 #define TEGRA234_MEMORY_CLIENT_PCIE5W 0xe3
+/* ISP read client 1 for Crossbar A */
+#define TEGRA234_MEMORY_CLIENT_ISPFALW 0xe4
+#define TEGRA234_MEMORY_CLIENT_NVL3R 0xe5
+#define TEGRA234_MEMORY_CLIENT_NVL3W 0xe6
+#define TEGRA234_MEMORY_CLIENT_NVL4R 0xe7
+#define TEGRA234_MEMORY_CLIENT_NVL4W 0xe8
+/* DLA0ARDA1 read clients */
+#define TEGRA234_MEMORY_CLIENT_DLA0RDA1 0xe9
+/* DLA1ARDA1 read clients */
+#define TEGRA234_MEMORY_CLIENT_DLA1RDA1 0xea
+/* PVA0RDA1 read clients */
+#define TEGRA234_MEMORY_CLIENT_PVA0RDA1 0xeb
+/* PVA0RDB1 read clients */
+#define TEGRA234_MEMORY_CLIENT_PVA0RDB1 0xec
 /* PCIE5r1 read clients */
 #define TEGRA234_MEMORY_CLIENT_PCIE5R1 0xef
+#define TEGRA234_MEMORY_CLIENT_NVENCSRD1 0xf0
+/* ISP read client for Crossbar A */
+#define TEGRA234_MEMORY_CLIENT_ISPRA1 0xf2
+#define TEGRA234_MEMORY_CLIENT_NVL0RHP 0xf4
+#define TEGRA234_MEMORY_CLIENT_NVL1RHP 0xf5
+#define TEGRA234_MEMORY_CLIENT_NVL2RHP 0xf6
+#define TEGRA234_MEMORY_CLIENT_NVL3RHP 0xf7
+#define TEGRA234_MEMORY_CLIENT_NVL4RHP 0xf8
+/* MSS internal memqual MIU5 read clients */
+#define TEGRA234_MEMORY_CLIENT_MIU5R 0xfc
+/* MSS internal memqual MIU5 write clients */
+#define TEGRA234_MEMORY_CLIENT_MIU5W 0xfd
+/* MSS internal memqual MIU6 read clients */
+#define TEGRA234_MEMORY_CLIENT_MIU6R 0xfe
+/* MSS internal memqual MIU6 write clients */
+#define TEGRA234_MEMORY_CLIENT_MIU6W 0xff
+#define TEGRA234_MEMORY_CLIENT_NVJPG1SRD 0x123
+#define TEGRA234_MEMORY_CLIENT_NVJPG1SWR 0x124
 
 #endif

include/dt-bindings/power/tegra234-powergate.h

···
 #ifndef __ABI_MACH_T234_POWERGATE_T234_H_
 #define __ABI_MACH_T234_POWERGATE_T234_H_
 
+#define TEGRA234_POWER_DOMAIN_OFA	1U
 #define TEGRA234_POWER_DOMAIN_AUD	2U
 #define TEGRA234_POWER_DOMAIN_DISP	3U
 #define TEGRA234_POWER_DOMAIN_PCIEX8A	5U
···
 #define TEGRA234_POWER_DOMAIN_PCIEX4BA	7U
 #define TEGRA234_POWER_DOMAIN_PCIEX4BB	8U
 #define TEGRA234_POWER_DOMAIN_PCIEX1A	9U
+#define TEGRA234_POWER_DOMAIN_XUSBA	10U
+#define TEGRA234_POWER_DOMAIN_XUSBB	11U
+#define TEGRA234_POWER_DOMAIN_XUSBC	12U
 #define TEGRA234_POWER_DOMAIN_PCIEX4CA	13U
 #define TEGRA234_POWER_DOMAIN_PCIEX4CB	14U
 #define TEGRA234_POWER_DOMAIN_PCIEX4CC	15U
···
 #define TEGRA234_POWER_DOMAIN_MGBEB	18U
 #define TEGRA234_POWER_DOMAIN_MGBEC	19U
 #define TEGRA234_POWER_DOMAIN_MGBED	20U
+#define TEGRA234_POWER_DOMAIN_ISPA	22U
+#define TEGRA234_POWER_DOMAIN_NVDEC	23U
+#define TEGRA234_POWER_DOMAIN_NVJPGA	24U
+#define TEGRA234_POWER_DOMAIN_NVENC	25U
+#define TEGRA234_POWER_DOMAIN_VI	28U
 #define TEGRA234_POWER_DOMAIN_VIC	29U
+#define TEGRA234_POWER_DOMAIN_PVA	30U
+#define TEGRA234_POWER_DOMAIN_DLAA	32U
+#define TEGRA234_POWER_DOMAIN_DLAB	33U
+#define TEGRA234_POWER_DOMAIN_CV	34U
+#define TEGRA234_POWER_DOMAIN_GPU	35U
+#define TEGRA234_POWER_DOMAIN_NVJPGB	36U
 
 #endif

include/dt-bindings/reset/tegra234-reset.h

···
  * @brief Identifiers for Resets controllable by firmware
  * @{
  */
+#define TEGRA234_RESET_ACTMON			1U
+#define TEGRA234_RESET_ADSP_ALL			2U
+#define TEGRA234_RESET_DSI_CORE			3U
+#define TEGRA234_RESET_CAN1			4U
+#define TEGRA234_RESET_CAN2			5U
+#define TEGRA234_RESET_DLA0			6U
+#define TEGRA234_RESET_DLA1			7U
+#define TEGRA234_RESET_DPAUX			8U
+#define TEGRA234_RESET_OFA			9U
+#define TEGRA234_RESET_NVJPG1			10U
 #define TEGRA234_RESET_PEX1_CORE_6		11U
 #define TEGRA234_RESET_PEX1_CORE_6_APB		12U
 #define TEGRA234_RESET_PEX1_COMMON_APB		13U
 #define TEGRA234_RESET_PEX2_CORE_7		14U
 #define TEGRA234_RESET_PEX2_CORE_7_APB		15U
+#define TEGRA234_RESET_NVDISPLAY		16U
+#define TEGRA234_RESET_EQOS			17U
 #define TEGRA234_RESET_GPCDMA			18U
+#define TEGRA234_RESET_GPU			19U
 #define TEGRA234_RESET_HDA			20U
 #define TEGRA234_RESET_HDACODEC			21U
+#define TEGRA234_RESET_EQOS_MACSEC		22U
+#define TEGRA234_RESET_EQOS_MACSEC_SECURE	23U
 #define TEGRA234_RESET_I2C1			24U
 #define TEGRA234_RESET_PEX2_CORE_8		25U
 #define TEGRA234_RESET_PEX2_CORE_8_APB		26U
···
 #define TEGRA234_RESET_I2C7			33U
 #define TEGRA234_RESET_I2C8			34U
 #define TEGRA234_RESET_I2C9			35U
+#define TEGRA234_RESET_ISP			36U
+#define TEGRA234_RESET_MIPI_CAL			37U
+#define TEGRA234_RESET_MPHY_CLK_CTL		38U
+#define TEGRA234_RESET_MPHY_L0_RX		39U
+#define TEGRA234_RESET_MPHY_L0_TX		40U
+#define TEGRA234_RESET_MPHY_L1_RX		41U
+#define TEGRA234_RESET_MPHY_L1_TX		42U
+#define TEGRA234_RESET_NVCSI			43U
+#define TEGRA234_RESET_NVDEC			44U
 #define TEGRA234_RESET_MGBE0_PCS		45U
 #define TEGRA234_RESET_MGBE0_MAC		46U
+#define TEGRA234_RESET_MGBE0_MACSEC		47U
+#define TEGRA234_RESET_MGBE0_MACSEC_SECURE	48U
 #define TEGRA234_RESET_MGBE1_PCS		49U
 #define TEGRA234_RESET_MGBE1_MAC		50U
+#define TEGRA234_RESET_MGBE1_MACSEC		51U
+#define TEGRA234_RESET_MGBE1_MACSEC_SECURE	52U
 #define TEGRA234_RESET_MGBE2_PCS		53U
 #define TEGRA234_RESET_MGBE2_MAC		54U
+#define TEGRA234_RESET_MGBE2_MACSEC		55U
 #define TEGRA234_RESET_PEX2_CORE_10		56U
 #define TEGRA234_RESET_PEX2_CORE_10_APB		57U
 #define TEGRA234_RESET_PEX2_COMMON_APB		58U
+#define TEGRA234_RESET_NVENC			59U
+#define TEGRA234_RESET_MGBE2_MACSEC_SECURE	60U
+#define TEGRA234_RESET_NVJPG			61U
+#define TEGRA234_RESET_LA			64U
+#define TEGRA234_RESET_HWPM			65U
+#define TEGRA234_RESET_PVA0_ALL			66U
+#define TEGRA234_RESET_CEC			67U
 #define TEGRA234_RESET_PWM1			68U
 #define TEGRA234_RESET_PWM2			69U
 #define TEGRA234_RESET_PWM3			70U
···
 #define TEGRA234_RESET_PWM8			75U
 #define TEGRA234_RESET_QSPI0			76U
 #define TEGRA234_RESET_QSPI1			77U
+#define TEGRA234_RESET_I2S7			78U
+#define TEGRA234_RESET_I2S8			79U
+#define TEGRA234_RESET_SCE_ALL			80U
+#define TEGRA234_RESET_RCE_ALL			81U
+#define TEGRA234_RESET_SDMMC1			82U
+#define TEGRA234_RESET_RSVD_83			83U
+#define TEGRA234_RESET_RSVD_84			84U
 #define TEGRA234_RESET_SDMMC4			85U
 #define TEGRA234_RESET_MGBE3_PCS		87U
 #define TEGRA234_RESET_MGBE3_MAC		88U
+#define TEGRA234_RESET_MGBE3_MACSEC		89U
+#define TEGRA234_RESET_MGBE3_MACSEC_SECURE	90U
+#define TEGRA234_RESET_SPI1			91U
+#define TEGRA234_RESET_SPI2			92U
+#define TEGRA234_RESET_SPI3			93U
+#define TEGRA234_RESET_SPI4			94U
+#define TEGRA234_RESET_TACH0			95U
+#define TEGRA234_RESET_TACH1			96U
+#define TEGRA234_RESET_SPI5			97U
+#define TEGRA234_RESET_TSEC			98U
+#define TEGRA234_RESET_UARTI			99U
 #define TEGRA234_RESET_UARTA			100U
-#define TEGRA234_RESET_VIC                      113U
+#define TEGRA234_RESET_UARTB			101U
+#define TEGRA234_RESET_UARTC			102U
+#define TEGRA234_RESET_UARTD			103U
+#define TEGRA234_RESET_UARTE			104U
+#define TEGRA234_RESET_UARTF			105U
+#define TEGRA234_RESET_UARTJ			106U
+#define TEGRA234_RESET_UARTH			107U
+#define TEGRA234_RESET_UFSHC			108U
+#define TEGRA234_RESET_UFSHC_AXI_M		109U
+#define TEGRA234_RESET_UFSHC_LP_SEQ		110U
+#define TEGRA234_RESET_RSVD_111			111U
+#define TEGRA234_RESET_VI			112U
+#define TEGRA234_RESET_VIC			113U
+#define TEGRA234_RESET_XUSB_PADCTL		114U
+#define TEGRA234_RESET_VI2			115U
 #define TEGRA234_RESET_PEX0_CORE_0		116U
 #define TEGRA234_RESET_PEX0_CORE_1		117U
 #define TEGRA234_RESET_PEX0_CORE_2		118U
···
 #define TEGRA234_RESET_PEX0_CORE_3_APB		124U
 #define TEGRA234_RESET_PEX0_CORE_4_APB		125U
 #define TEGRA234_RESET_PEX0_COMMON_APB		126U
+#define TEGRA234_RESET_RSVD_127			127U
+#define TEGRA234_RESET_NVHS_UPHY_PLL1		128U
 #define TEGRA234_RESET_PEX1_CORE_5		129U
 #define TEGRA234_RESET_PEX1_CORE_5_APB		130U
+#define TEGRA234_RESET_GBE_UPHY			131U
+#define TEGRA234_RESET_GBE_UPHY_PM		132U
+#define TEGRA234_RESET_NVHS_UPHY		133U
+#define TEGRA234_RESET_NVHS_UPHY_PLL0		134U
+#define TEGRA234_RESET_NVHS_UPHY_L0		135U
+#define TEGRA234_RESET_NVHS_UPHY_L1		136U
+#define TEGRA234_RESET_NVHS_UPHY_L2		137U
+#define TEGRA234_RESET_NVHS_UPHY_L3		138U
+#define TEGRA234_RESET_NVHS_UPHY_L4		139U
+#define TEGRA234_RESET_NVHS_UPHY_L5		140U
+#define TEGRA234_RESET_NVHS_UPHY_L6		141U
+#define TEGRA234_RESET_NVHS_UPHY_L7		142U
+#define TEGRA234_RESET_NVHS_UPHY_PM		143U
+#define TEGRA234_RESET_DMIC5			144U
+#define TEGRA234_RESET_APE			145U
+#define TEGRA234_RESET_PEX_USB_UPHY		146U
+#define TEGRA234_RESET_PEX_USB_UPHY_L0		147U
+#define TEGRA234_RESET_PEX_USB_UPHY_L1		148U
+#define TEGRA234_RESET_PEX_USB_UPHY_L2		149U
+#define TEGRA234_RESET_PEX_USB_UPHY_L3		150U
+#define TEGRA234_RESET_PEX_USB_UPHY_L4		151U
+#define TEGRA234_RESET_PEX_USB_UPHY_L5		152U
+#define TEGRA234_RESET_PEX_USB_UPHY_L6		153U
+#define TEGRA234_RESET_PEX_USB_UPHY_L7		154U
+#define TEGRA234_RESET_PEX_USB_UPHY_PLL0	159U
+#define TEGRA234_RESET_PEX_USB_UPHY_PLL1	160U
+#define TEGRA234_RESET_PEX_USB_UPHY_PLL2	161U
+#define TEGRA234_RESET_PEX_USB_UPHY_PLL3	162U
+#define TEGRA234_RESET_GBE_UPHY_L0		163U
+#define TEGRA234_RESET_GBE_UPHY_L1		164U
+#define TEGRA234_RESET_GBE_UPHY_L2		165U
+#define TEGRA234_RESET_GBE_UPHY_L3		166U
+#define TEGRA234_RESET_GBE_UPHY_L4		167U
+#define TEGRA234_RESET_GBE_UPHY_L5		168U
+#define TEGRA234_RESET_GBE_UPHY_L6		169U
+#define TEGRA234_RESET_GBE_UPHY_L7		170U
+#define TEGRA234_RESET_GBE_UPHY_PLL0		171U
+#define TEGRA234_RESET_GBE_UPHY_PLL1		172U
+#define TEGRA234_RESET_GBE_UPHY_PLL2		173U
 
 /** @} */