Merge tag 'amlogic-arm64-dt-for-v6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into soc/dt

Amlogic ARM64 DT changes for v6.12:
- New Boards:
- AW419 (Amlogic C3)
- Power Controller node for Amlogic A5 SoC
- Always-On Secure node for Amlogig A4/T7/C4 & S4 SoCs
- Amlogic A4 & C3 hardware support:
- PLL, SPICC, NOND, SDCard, Ethernet, Watchdog
- Final fixes for DTBs check:
- add clock and clock-names to sound cards
- drop saradc gxlx compatible

* tag 'amlogic-arm64-dt-for-v6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux:
arm64: dts: amlogic: gxlx-s905l-p271: drop saradc gxlx compatible
arm64: dts: amlogic: add clock and clock-names to sound cards
arm64: dts: amlogic: c3: fix dtbcheck warning
arm64: dts: amlogic: add C3 AW419 board
arm64: dts: amlogic: add some device nodes for C3
dt-bindings: clock: fix C3 PLL input parameter
arm64: dts: amlogic: a4: add ao secure node
arm64: dts: amlogic: t7: add ao secure node
arm64: dts: amlogic: c3: add ao secure node
arm64: dts: amlogic: s4: add ao secure node
arm64: dts: amlogic: add watchdog node for A4 SoCs
arm64: dts: amlogic: enable some device nodes for S4
arm64: dts: amlogic: a5: add power domain controller node

Link: https://lore.kernel.org/r/[e-mail]
Signed-off-by: Arnd Bergmann <[e-mail]>

Documentation/devicetree/bindings/clock/amlogic,c3-pll-clkc.yaml

···
     items:
       - description: input top pll
       - description: input mclk pll
+      - description: input fix pll
 
   clock-names:
     items:
       - const: top
       - const: mclk
+      - const: fix
 
   "#clock-cells":
     const: 1
···
             compatible = "amlogic,c3-pll-clkc";
             reg = <0x0 0x8000 0x0 0x1a4>;
             clocks = <&scmi_clk 2>,
-                     <&scmi_clk 5>;
-            clock-names = "top", "mclk";
+                     <&scmi_clk 5>,
+                     <&scmi_clk 12>;
+            clock-names = "top", "mclk", "fix";
             #clock-cells = <1>;
         };
     };

arch/arm64/boot/dts/amlogic/Makefile

···
 dtb-$(CONFIG_ARCH_MESON) += amlogic-a4-a113l2-ba400.dtb
 dtb-$(CONFIG_ARCH_MESON) += amlogic-a5-a113x2-av400.dtb
 dtb-$(CONFIG_ARCH_MESON) += amlogic-c3-c302x-aw409.dtb
+dtb-$(CONFIG_ARCH_MESON) += amlogic-c3-c308l-aw419.dtb
 dtb-$(CONFIG_ARCH_MESON) += amlogic-t7-a311d2-an400.dtb
 dtb-$(CONFIG_ARCH_MESON) += amlogic-t7-a311d2-khadas-vim4.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-a1-ad401.dtb

arch/arm64/boot/dts/amlogic/amlogic-a4-common.dtsi

···
 			#size-cells = <2>;
 			ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>;
 
+			watchdog@2100 {
+				compatible = "amlogic,a4-wdt", "amlogic,t7-wdt";
+				reg = <0x0 0x2100 0x0 0x10>;
+				clocks = <&xtal>;
+			};
+
 			uart_b: serial@7a000 {
 				compatible = "amlogic,a4-uart",
 					     "amlogic,meson-s4-uart";
···
 				clocks = <&xtal>, <&xtal>, <&xtal>;
 				clock-names = "xtal", "pclk", "baud";
 				status = "disabled";
+			};
+
+			sec_ao: ao-secure@10220 {
+				compatible = "amlogic,a4-ao-secure",
+					     "amlogic,meson-gx-ao-secure",
+					     "syscon";
+				reg = <0x0 0x10220 0x0 0x140>;
+				amlogic,has-chip-id;
 			};
 		};
 	};

arch/arm64/boot/dts/amlogic/amlogic-a5.dtsi

···
  */
 
 #include "amlogic-a4-common.dtsi"
+#include <dt-bindings/power/amlogic,a5-pwrc.h>
 / {
 	cpus {
 		#address-cells = <2>;
···
 			compatible = "arm,cortex-a55";
 			reg = <0x0 0x300>;
 			enable-method = "psci";
+		};
+	};
+
+	sm: secure-monitor {
+		compatible = "amlogic,meson-gxbb-sm";
+
+		pwrc: power-controller {
+			compatible = "amlogic,a5-pwrc";
+			#power-domain-cells = <1>;
 		};
 	};
 };

arch/arm64/boot/dts/amlogic/amlogic-c3-c302x-aw409.dts

···
 
 	aliases {
 		serial0 = &uart_b;
+		spi0 = &spifc;
 	};
 
 	memory@0 {
 		device_type = "memory";
 		reg = <0x0 0x0 0x0 0x10000000>;
 	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* 9 MiB reserved for ARM Trusted Firmware */
+		secmon_reserved: secmon@7f00000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x07f00000 0x0 0x900000>;
+			no-map;
+		};
+	};
+
+	main_12v: regulator-main-12v {
+		compatible = "regulator-fixed";
+		regulator-name = "12V";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vcc_5v: regulator-vcc-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&main_12v>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vddq: regulator-vddq {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDQ";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		vin-supply = <&main_12v>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vddao_3v3: regulator-vddao-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&main_12v>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vddao_1v8: regulator-vddao-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	ddr4_2v5: regulator-ddr4-2v5 {
+		compatible = "regulator-fixed";
+		regulator-name = "DDR4_2V5";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vcc_3v3: regulator-vcc-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vcc_1v8: regulator-vcc-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_3v3>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vdd_1v8: regulator-vdd-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD1V8_BOOT";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_3v3>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vddio_b: regulator-vddio-3v3-b {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_B";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_3v3>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	sdcard: regulator-sdcard {
+		compatible = "regulator-fixed";
+		regulator-name = "SDCARD_POWER";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vddao_3v3>;
+		gpio = <&gpio GPIOA_4 GPIO_ACTIVE_LOW>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
 };
 
 &uart_b {
 	status = "okay";
+};
+
+&nand {
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	pinctrl-0 = <&nand_pins>;
+	pinctrl-names = "default";
+
+	nand@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		nand-on-flash-bbt;
+
+		partition@0 {
+			label = "boot";
+			reg = <0x0 0x00200000>;
+		};
+		partition@200000 {
+			label = "env";
+			reg = <0x00200000 0x00400000>;
+		};
+		partition@600000 {
+			label = "system";
+			reg = <0x00600000 0x00a00000>;
+		};
+		partition@1000000 {
+			label = "rootfs";
+			reg = <0x01000000 0x03000000>;
+		};
+		partition@4000000 {
+			label = "media";
+			reg = <0x04000000 0x8000000>;
+		};
+	};
+};
+
+&ethmac {
+	status = "okay";
+	phy-handle = <&internal_ephy>;
+	phy-mode = "rmii";
+};
+
+&spifc {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	pinctrl-0 = <&spifc_pins>;
+	pinctrl-names = "default";
+
+	nand@0 {
+		compatible = "spi-nand";
+		reg = <0>;
+		spi-max-frequency = <83000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+		status = "disabled";
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "boot";
+				reg = <0 0x200000>;
+			};
+
+			partition@200000 {
+				label = "env";
+				reg = <0x200000 0x400000>;
+			};
+
+			partition@600000 {
+				label = "system";
+				reg = <0x600000 0xa00000>;
+			};
+
+			partition@1000000 {
+				label = "rootfs";
+				reg = <0x1000000 0x3000000>;
+			};
+
+			partition@4000000 {
+				label = "data";
+				reg = <0x4000000 0x8000000>;
+			};
+		};
+	};
+};
+
+&sd {
+	status = "okay";
+	pinctrl-0 = <&sdcard_pins>;
+	pinctrl-1 = <&sdcard_clk_gate_pins>;
+	pinctrl-names = "default","clk-gate";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <50000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&sdcard>;
+	vqmmc-supply = <&sdcard>;
 };

arch/arm64/boot/dts/amlogic/amlogic-c3-c308l-aw419.dts

···
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2024 Amlogic, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "amlogic-c3.dtsi"
+
+/ {
+	model = "Amlogic C308l aw419 Development Board";
+	compatible = "amlogic,aw419", "amlogic,c3";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &uart_b;
+		spi0 = &spifc;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* 9 MiB reserved for ARM Trusted Firmware */
+		secmon_reserved: secmon@7f00000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x07f00000 0x0 0x900000>;
+			no-map;
+		};
+	};
+
+	main_12v: regulator-main-12v {
+		compatible = "regulator-fixed";
+		regulator-name = "12V";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vcc_5v: regulator-vcc-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&main_12v>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vddq: regulator-vddq {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDQ";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		vin-supply = <&main_12v>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vddao_3v3: regulator-vddao-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&main_12v>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vddao_1v8: regulator-vddao-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	ddr4_2v5: regulator-ddr4-2v5 {
+		compatible = "regulator-fixed";
+		regulator-name = "DDR4_2V5";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vcc_3v3: regulator-vcc-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vcc_1v8: regulator-vcc-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_3v3>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vdd_1v8: regulator-vdd-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD1V8_BOOT";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_3v3>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vddio_b: regulator-vddio-3v3-b {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_B";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_3v3>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	sdcard: regulator-sdcard {
+		compatible = "regulator-fixed";
+		regulator-name = "SDCARD_POWER";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vddao_3v3>;
+		gpio = <&gpio GPIOA_4 GPIO_ACTIVE_LOW>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
+&uart_b {
+	status = "okay";
+};
+
+&nand {
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	pinctrl-0 = <&nand_pins>;
+	pinctrl-names = "default";
+
+	nand@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		nand-on-flash-bbt;
+
+		partition@0 {
+			label = "boot";
+			reg = <0x0 0x00200000>;
+		};
+		partition@200000 {
+			label = "env";
+			reg = <0x00200000 0x00400000>;
+		};
+		partition@600000 {
+			label = "system";
+			reg = <0x00600000 0x00a00000>;
+		};
+		partition@1000000 {
+			label = "rootfs";
+			reg = <0x01000000 0x03000000>;
+		};
+		partition@4000000 {
+			label = "media";
+			reg = <0x04000000 0x8000000>;
+		};
+	};
+};
+
+&ethmac {
+	status = "okay";
+	phy-handle = <&internal_ephy>;
+	phy-mode = "rmii";
+};
+
+&spifc {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	pinctrl-0 = <&spifc_pins>;
+	pinctrl-names = "default";
+
+	nand@0 {
+		compatible = "spi-nand";
+		reg = <0>;
+		spi-max-frequency = <83000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+		status = "disabled";
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "boot";
+				reg = <0 0x200000>;
+			};
+
+			partition@200000 {
+				label = "env";
+				reg = <0x200000 0x400000>;
+			};
+
+			partition@600000 {
+				label = "system";
+				reg = <0x600000 0xa00000>;
+			};
+
+			partition@1000000 {
+				label = "rootfs";
+				reg = <0x1000000 0x3000000>;
+			};
+
+			partition@4000000 {
+				label = "data";
+				reg = <0x4000000 0x8000000>;
+			};
+		};
+	};
+};
+
+&sd {
+	status = "okay";
+	pinctrl-0 = <&sdcard_pins>;
+	pinctrl-1 = <&sdcard_clk_gate_pins>;
+	pinctrl-names = "default","clk-gate";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <50000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&sdcard>;
+	vqmmc-supply = <&sdcard>;
+};

arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi

···
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/reset/amlogic,c3-reset.h>
+#include <dt-bindings/clock/amlogic,c3-pll-clkc.h>
+#include <dt-bindings/clock/amlogic,c3-scmi-clkc.h>
+#include <dt-bindings/clock/amlogic,c3-peripherals-clkc.h>
+#include <dt-bindings/power/amlogic,c3-pwrc.h>
+#include <dt-bindings/gpio/amlogic-c3-gpio.h>
 
 / {
 	cpus {
···
 		};
 	};
 
+	sram@7f50e00 {
+		compatible = "mmio-sram";
+		reg = <0x0 0x07f50e00 0x0 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x0 0x07f50e00 0x100>;
+
+		scmi_shmem: sram@0 {
+			compatible = "arm,scmi-shmem";
+			reg = <0x0 0x100>;
+		};
+	};
+
+	firmware {
+		scmi: scmi {
+			compatible = "arm,scmi-smc";
+			arm,smc-id = <0x820000C1>;
+			shmem = <&scmi_shmem>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			scmi_clk: protocol@14 {
+				reg = <0x14>;
+				#clock-cells = <1>;
+			};
+		};
+	};
+
 	soc {
 		compatible = "simple-bus";
 		#address-cells = <2>;
···
 			#size-cells = <2>;
 			ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>;
 
+			clkc_periphs: clock-controller@0 {
+				compatible = "amlogic,c3-peripherals-clkc";
+				reg = <0x0 0x0 0x0 0x49c>;
+				#clock-cells = <1>;
+				clocks = <&xtal>,
+					 <&scmi_clk CLKID_OSC>,
+					 <&scmi_clk CLKID_FIXED_PLL_OSC>,
+					 <&clkc_pll CLKID_FCLK_DIV2>,
+					 <&clkc_pll CLKID_FCLK_DIV2P5>,
+					 <&clkc_pll CLKID_FCLK_DIV3>,
+					 <&clkc_pll CLKID_FCLK_DIV4>,
+					 <&clkc_pll CLKID_FCLK_DIV5>,
+					 <&clkc_pll CLKID_FCLK_DIV7>,
+					 <&clkc_pll CLKID_GP0_PLL>,
+					 <&scmi_clk CLKID_GP1_PLL_OSC>,
+					 <&clkc_pll CLKID_HIFI_PLL>,
+					 <&scmi_clk CLKID_SYS_CLK>,
+					 <&scmi_clk CLKID_AXI_CLK>,
+					 <&scmi_clk CLKID_SYS_PLL_DIV16>,
+					 <&scmi_clk CLKID_CPU_CLK_DIV16>;
+				clock-names = "xtal_24m",
+					      "oscin",
+					      "fix",
+					      "fdiv2",
+					      "fdiv2p5",
+					      "fdiv3",
+					      "fdiv4",
+					      "fdiv5",
+					      "fdiv7",
+					      "gp0",
+					      "gp1",
+					      "hifi",
+					      "sysclk",
+					      "axiclk",
+					      "sysplldiv16",
+					      "cpudiv16";
+			};
+
 			reset: reset-controller@2000 {
 				compatible = "amlogic,c3-reset";
 				reg = <0x0 0x2000 0x0 0x98>;
···
 				compatible = "amlogic,c3-periphs-pinctrl";
 				#address-cells = <2>;
 				#size-cells = <2>;
-				ranges;
+				ranges = <0x0 0x0 0x0 0x4000 0x0 0x02de>;
 
-				gpio: bank@4000 {
-					reg = <0x0 0x4000 0x0 0x004c>,
-					      <0x0 0x4100 0x0 0x01de>;
+				gpio: bank@0 {
+					reg = <0x0 0x0 0x0 0x004c>,
+					      <0x0 0x100 0x0 0x01de>;
 					reg-names = "mux", "gpio";
 					gpio-controller;
 					#gpio-cells = <2>;
 					gpio-ranges = <&periphs_pinctrl 0 0 55>;
+				};
+
+				i2c0_pins1: i2c0-pins1 {
+					mux {
+						groups = "i2c0_sda_e",
+							 "i2c0_scl_e";
+						function = "i2c0";
+						bias-disable;
+						drive-strength-microamp = <3000>;
+					};
+				};
+
+				i2c0_pins2: i2c0-pins2 {
+					mux {
+						groups = "i2c0_sda_d",
+							 "i2c0_scl_d";
+						function = "i2c0";
+						bias-disable;
+						drive-strength-microamp = <3000>;
+					};
+				};
+
+				i2c1_pins1: i2c1-pins1 {
+					mux {
+						groups = "i2c1_sda_x",
+							 "i2c1_scl_x";
+						function = "i2c1";
+						bias-disable;
+						drive-strength-microamp = <3000>;
+					};
+				};
+
+				i2c1_pins2: i2c1-pins2 {
+					mux {
+						groups = "i2c1_sda_d",
+							 "i2c1_scl_d";
+						function = "i2c1";
+						bias-disable;
+						drive-strength-microamp = <3000>;
+					};
+				};
+
+				i2c1_pins3: i2c1-pins3 {
+					mux {
+						groups = "i2c1_sda_a",
+							 "i2c1_scl_a";
+						function = "i2c1";
+						bias-disable;
+						drive-strength-microamp = <3000>;
+					};
+				};
+
+				i2c1_pins4: i2c1-pins4 {
+					mux {
+						groups = "i2c1_sda_b",
+							 "i2c1_scl_b";
+						function = "i2c1";
+						bias-disable;
+						drive-strength-microamp = <3000>;
+					};
+				};
+
+				i2c2_pins1: i2c2-pins1 {
+					mux {
+						groups = "i2c2_sda",
+							 "i2c2_scl";
+						function = "i2c2";
+						bias-disable;
+						drive-strength-microamp = <3000>;
+					};
+				};
+
+				i2c3_pins1: i2c3-pins1 {
+					mux {
+						groups = "i2c3_sda_c",
+							 "i2c3_scl_c";
+						function = "i2c3";
+						bias-disable;
+						drive-strength-microamp = <3000>;
+					};
+				};
+
+				i2c3_pins2: i2c3-pins2 {
+					mux {
+						groups = "i2c3_sda_x",
+							 "i2c3_scl_x";
+						function = "i2c3";
+						bias-disable;
+						drive-strength-microamp = <3000>;
+					};
+				};
+
+				i2c3_pins3: i2c3-pins3 {
+					mux {
+						groups = "i2c3_sda_d",
+							 "i2c3_scl_d";
+						function = "i2c3";
+						bias-disable;
+						drive-strength-microamp = <3000>;
+					};
+				};
+
+				nand_pins: nand-pins {
+					mux {
+						groups = "emmc_nand_d0",
+							 "emmc_nand_d1",
+							 "emmc_nand_d2",
+							 "emmc_nand_d3",
+							 "emmc_nand_d4",
+							 "emmc_nand_d5",
+							 "emmc_nand_d6",
+							 "emmc_nand_d7",
+							 "nand_ce0",
+							 "nand_ale",
+							 "nand_cle",
+							 "nand_wen_clk",
+							 "nand_ren_wr";
+						function = "nand";
+						input-enable;
+					};
+				};
+
+				sdcard_pins: sdcard-pins {
+					mux {
+						groups = "sdcard_d0",
+							 "sdcard_d1",
+							 "sdcard_d2",
+							 "sdcard_d3",
+							 "sdcard_clk",
+							 "sdcard_cmd";
+						function = "sdcard";
+						bias-pull-up;
+						drive-strength-microamp = <4000>;
+					};
+				};
+
+				sdcard_clk_gate_pins: sdcard-clk-cmd-pins {
+					mux {
+						groups = "GPIOC_4";
+						function = "gpio_periphs";
+						bias-pull-down;
+						drive-strength-microamp = <4000>;
+					};
+				};
+
+				sdio_m_clk_gate_pins: sdio-m-clk-cmd-pins {
+					mux {
+						groups = "sdio_clk";
+						function = "sdio";
+						bias-pull-down;
+						drive-strength-microamp = <4000>;
+					};
+				};
+
+				sdio_m_pins: sdio-m-all-pins {
+					mux {
+						groups = "sdio_d0",
+							 "sdio_d1",
+							 "sdio_d2",
+							 "sdio_d3",
+							 "sdio_clk",
+							 "sdio_cmd";
+						function = "sdio";
+						input-enable;
+						bias-pull-up;
+						drive-strength-microamp = <4000>;
+					};
+				};
+
+				spicc0_pins1: spicc0-pins1 {
+					mux {
+						groups = "spi_a_mosi_b",
+							 "spi_a_miso_b",
+							 "spi_a_clk_b";
+						function = "spi_a";
+						drive-strength-microamp = <3000>;
+					};
+				};
+
+				spicc0_pins2: spicc0-pins2 {
+					mux {
+						groups = "spi_a_mosi_c",
+							 "spi_a_miso_c",
+							 "spi_a_clk_c";
+						function = "spi_a";
+						drive-strength-microamp = <3000>;
+					};
+				};
+
+				spicc0_pins3: spicc0-pins3 {
+					mux {
+						groups = "spi_a_mosi_x",
+							 "spi_a_miso_x",
+							 "spi_a_clk_x";
+						function = "spi_a";
+						drive-strength-microamp = <3000>;
+					};
+				};
+
+				spicc1_pins1: spicc1-pins1 {
+					mux {
+						groups = "spi_b_mosi_d",
+							 "spi_b_miso_d",
+							 "spi_b_clk_d";
+						function = "spi_b";
+						drive-strength-microamp = <3000>;
+					};
+				};
+
+				spicc1_pins2: spicc1-pins2 {
+					mux {
+						groups = "spi_b_mosi_x",
+							 "spi_b_miso_x",
+							 "spi_b_clk_x";
+						function = "spi_b";
+						drive-strength-microamp = <3000>;
+					};
+				};
+
+				spifc_pins: spifc-pins {
+					mux {
+						groups = "spif_mo",
+							 "spif_mi",
+							 "spif_clk",
+							 "spif_cs",
+							 "spif_hold",
+							 "spif_wp",
+							 "spif_clk_loop";
+						function = "spif";
+						drive-strength-microamp = <4000>;
+					};
 				};
 			};
 
···
 					<10 11 12 13 14 15 16 17 18 19 20 21>;
 			};
 
+			clkc_pll: clock-controller@8000 {
+				compatible = "amlogic,c3-pll-clkc";
+				reg = <0x0 0x8000 0x0 0x1a4>;
+				#clock-cells = <1>;
+				clocks = <&scmi_clk CLKID_TOP_PLL_OSC>,
+					 <&scmi_clk CLKID_MCLK_PLL_OSC>,
+					 <&scmi_clk CLKID_FIXED_PLL_OSC>;
+				clock-names = "top",
+					      "mclk",
+					      "fix";
+			};
+
+			eth_phy: mdio-multiplexer@28000 {
+				compatible = "amlogic,g12a-mdio-mux";
+				reg = <0x0 0x28000 0x0 0xa4>;
+
+				clocks = <&clkc_periphs CLKID_SYS_ETH_PHY>,
+					 <&xtal>,
+					 <&clkc_pll CLKID_FCLK_50M>;
+				clock-names = "pclk", "clkin0", "clkin1";
+				mdio-parent-bus = <&mdio0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ext_mdio: mdio@0 {
+					reg = <0>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+
+				int_mdio: mdio@1 {
+					reg = <1>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					internal_ephy: ethernet_phy@8 {
+						compatible = "ethernet-phy-id0180.3301",
+							     "ethernet-phy-ieee802.3-c22";
+						interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+						reg = <8>;
+						max-speed = <100>;
+					};
+				};
+			};
+
+			spicc0: spi@50000 {
+				compatible = "amlogic,meson-g12a-spicc";
+				reg = <0x0 0x50000 0x0 0x44>;
+				interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clkc_periphs CLKID_SYS_SPICC_0>,
+					 <&clkc_periphs CLKID_SPICC_A>;
+				clock-names = "core", "pclk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spicc1: spi@52000 {
+				compatible = "amlogic,meson-g12a-spicc";
+				reg = <0x0 0x52000 0x0 0x44>;
+				interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clkc_periphs CLKID_SYS_SPICC_1>,
+					 <&clkc_periphs CLKID_SPICC_B>;
+				clock-names = "core", "pclk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spifc: spi@56000 {
+				compatible = "amlogic,a1-spifc";
+				reg = <0x0 0x56000 0x0 0x290>;
+				interrupts = <GIC_SPI 182 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc_periphs CLKID_SPIFC>;
+				clock-names = "core";
+				status = "disabled";
+			};
+
+			i2c0: i2c@66000 {
+				compatible = "amlogic,meson-axg-i2c";
+				reg = <0x0 0x66000 0x0 0x24>;
+				interrupts = <GIC_SPI 160 IRQ_TYPE_EDGE_RISING>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&clkc_periphs CLKID_SYS_I2C_M_A>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@68000 {
+				compatible = "amlogic,meson-axg-i2c";
+				reg = <0x0 0x68000 0x0 0x24>;
+				interrupts = <GIC_SPI 161 IRQ_TYPE_EDGE_RISING>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&clkc_periphs CLKID_SYS_I2C_M_B>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@6a000 {
+				compatible = "amlogic,meson-axg-i2c";
+				reg = <0x0 0x6a000 0x0 0x24>;
+				interrupts = <GIC_SPI 162 IRQ_TYPE_EDGE_RISING>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&clkc_periphs CLKID_SYS_I2C_M_C>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@6c000 {
+				compatible = "amlogic,meson-axg-i2c";
+				reg = <0x0 0x6c000 0x0 0x24>;
+				interrupts = <GIC_SPI 163 IRQ_TYPE_EDGE_RISING>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&clkc_periphs CLKID_SYS_I2C_M_D>;
+				status = "disabled";
+			};
+
 			uart_b: serial@7a000 {
 				compatible = "amlogic,meson-s4-uart",
 					   "amlogic,meson-ao-uart";
 				reg = <0x0 0x7a000 0x0 0x18>;
 				interrupts = <GIC_SPI 169 IRQ_TYPE_EDGE_RISING>;
 				status = "disabled";
-				clocks = <&xtal>, <&xtal>, <&xtal>;
+				clocks = <&xtal>, <&clkc_periphs CLKID_SYS_UART_B>, <&xtal>;
 				clock-names = "xtal", "pclk", "baud";
 			};
 
+			sec_ao: ao-secure@10220 {
+				compatible = "amlogic,c3-ao-secure",
+					     "amlogic,meson-gx-ao-secure",
+					     "syscon";
+				reg = <0x0 0x10220 0x0 0x140>;
+				amlogic,has-chip-id;
+			};
+
+			sdio: mmc@88000 {
+				compatible = "amlogic,meson-axg-mmc";
+				reg = <0x0 0x88000 0x0 0x800>;
+				interrupts = <GIC_SPI 176 IRQ_TYPE_EDGE_RISING>;
+				power-domains = <&pwrc PWRC_C3_SDIOA_ID>;
+				clocks = <&clkc_periphs CLKID_SYS_SD_EMMC_A>,
+					  <&clkc_periphs CLKID_SD_EMMC_A>,
+					  <&clkc_pll CLKID_FCLK_DIV2>;
+				clock-names = "core","clkin0", "clkin1";
+				no-mmc;
+				no-sd;
+				resets = <&reset RESET_SD_EMMC_A>;
+				status = "disabled";
+			};
+
+			sd: mmc@8a000 {
+				compatible = "amlogic,meson-axg-mmc";
+				reg = <0x0 0x8a000 0x0 0x800>;
+				interrupts = <GIC_SPI 177 IRQ_TYPE_EDGE_RISING>;
+				power-domains = <&pwrc PWRC_C3_SDCARD_ID>;
+				clocks = <&clkc_periphs CLKID_SYS_SD_EMMC_B>,
+					<&clkc_periphs CLKID_SD_EMMC_B>,
+					<&clkc_pll CLKID_FCLK_DIV2>;
+				clock-names = "core", "clkin0", "clkin1";
+				no-mmc;
+				no-sdio;
+				resets = <&reset RESET_SD_EMMC_B>;
+				status = "disabled";
+			};
+
+			nand: nand-controller@8d000 {
+				compatible = "amlogic,meson-axg-nfc";
+				reg = <0x0 0x8d000 0x0 0x200>,
+					<0x0 0x8C000 0x0 0x4>;
+				reg-names = "nfc", "emmc";
+				interrupts = <GIC_SPI 87 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc_periphs CLKID_SYS_SD_EMMC_C>,
+					<&clkc_pll CLKID_FCLK_DIV2>;
+				clock-names = "core", "device";
+				status = "disabled";
+			};
+		};
+
+		ethmac: ethernet@fdc00000 {
+			compatible = "amlogic,meson-g12a-dwmac",
+				     "snps,dwmac-3.70a",
+				     "snps,dwmac";
+			reg = <0x0 0xfdc00000 0x0 0x10000>,
+			      <0x0 0xfe024000 0x0 0x8>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			power-domains = <&pwrc PWRC_C3_ETH_ID>;
+			clocks = <&clkc_periphs CLKID_SYS_ETH_MAC>,
+				 <&clkc_pll CLKID_FCLK_DIV2>,
+				 <&clkc_pll CLKID_FCLK_50M>;
+			clock-names = "stmmaceth", "clkin0", "clkin1";
+			rx-fifo-depth = <4096>;
+			tx-fifo-depth = <2048>;
+			status = "disabled";
+
+			mdio0: mdio {
+				compatible = "snps,dwmac-mdio";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
 		};
 	};
 };

arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi

···
 				interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
 				status = "disabled";
 			};
+
+			sec_ao: ao-secure@10220 {
+				compatible = "amlogic,t7-ao-secure",
+					     "amlogic,meson-gx-ao-secure",
+					     "syscon";
+				reg = <0x0 0x10220 0x0 0x140>;
+				amlogic,has-chip-id;
+			};
 		};
 
 	};

arch/arm64/boot/dts/amlogic/meson-axg-s400.dts

···
 				"Speaker1 Right", "SPK1 OUT_D",
 				"Linein AINL", "Linein",
 				"Linein AINR", "Linein";
+		clocks = <&clkc CLKID_HIFI_PLL>,
+			 <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>;
+
 		assigned-clocks = <&clkc CLKID_HIFI_PLL>,
 				  <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>;

arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am.dts

···
 				"SPDIFOUT_A IN 1", "FRDDR_B OUT 3",
 				"SPDIFOUT_A IN 2", "FRDDR_C OUT 3";
 
+		clocks = <&clkc CLKID_MPLL2>,
+			 <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>;
+
 		assigned-clocks = <&clkc CLKID_MPLL2>,
 				  <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>;

arch/arm64/boot/dts/amlogic/meson-g12a-radxa-zero.dts

···
 				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
 				"TDM_B Playback", "TDMOUT_B OUT";
 
+		clocks = <&clkc CLKID_MPLL2>,
+			 <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>;
+
 		assigned-clocks = <&clkc CLKID_MPLL2>,
 				  <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>;

arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts

···
 				"TODDR_B IN 1", "TDMIN_B OUT",
 				"TODDR_C IN 1", "TDMIN_B OUT";
 
+		clocks = <&clkc CLKID_MPLL2>,
+			 <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>;
+
 		assigned-clocks = <&clkc CLKID_MPLL2>,
 				  <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>;

arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts

···
 				"Lineout", "10U2 OUTL",
 				"Lineout", "10U2 OUTR";
 
+		clocks = <&clkc CLKID_MPLL2>,
+			 <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>;
+
 		assigned-clocks = <&clkc CLKID_MPLL2>,
 				  <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>;

arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts

···
 				"SPDIFOUT_A IN 1", "FRDDR_B OUT 3",
 				"SPDIFOUT_A IN 2", "FRDDR_C OUT 3";
 
+		clocks = <&clkc CLKID_MPLL2>,
+			 <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>;
+
 		assigned-clocks = <&clkc CLKID_MPLL2>,
 				  <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>;

arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4-cm4io.dts

···
 				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
 				"TDM_B Playback", "TDMOUT_B OUT";
 
+		clocks = <&clkc CLKID_MPLL2>,
+			 <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>;
+
 		assigned-clocks = <&clkc CLKID_MPLL2>,
 				  <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>;

arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4-mnt-reform2.dts

···
 				"LINPUT1", "Mic Jack",
 				"Mic Jack", "MICB";
 
+		clocks = <&clkc CLKID_MPLL2>,
+			 <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>;
+
 		assigned-clocks = <&clkc CLKID_MPLL2>,
 					<&clkc CLKID_MPLL0>,
 					<&clkc CLKID_MPLL1>;

arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi

···
 				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
 				"TDM_B Playback", "TDMOUT_B OUT";
 
+		clocks = <&clkc CLKID_MPLL2>,
+			 <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>;
+
 		assigned-clocks = <&clkc CLKID_MPLL2>,
 				  <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>;

arch/arm64/boot/dts/amlogic/meson-g12b-dreambox.dtsi

···
 				"SPDIFOUT_A IN 0", "FRDDR_A OUT 3",
 				"SPDIFOUT_A IN 1", "FRDDR_B OUT 3",
 				"SPDIFOUT_A IN 2", "FRDDR_C OUT 3";
+
+		clocks = <&clkc CLKID_MPLL2>,
+			 <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>;
+
+
 		assigned-clocks = <&clkc CLKID_MPLL2>,
 				  <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>;

arch/arm64/boot/dts/amlogic/meson-g12b-gsking-x.dts

···
 				"TDMOUT_A IN 2", "FRDDR_C OUT 1",
 				"TDM_A Playback", "TDMOUT_A OUT";
 
+		clocks = <&clkc CLKID_MPLL2>,
+			 <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>;
+
 		assigned-clocks = <&clkc CLKID_MPLL2>,
 				  <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>;

arch/arm64/boot/dts/amlogic/meson-g12b-gtking-pro.dts

···
 				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
 				"TDM_B Playback", "TDMOUT_B OUT";
 
+		clocks = <&clkc CLKID_MPLL2>,
+			 <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>;
+
 		assigned-clocks = <&clkc CLKID_MPLL2>,
 				  <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>;

arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dts

···
 				"SPDIFOUT_A IN 1", "FRDDR_B OUT 3",
 				"SPDIFOUT_A IN 2", "FRDDR_C OUT 3";
 
+		clocks = <&clkc CLKID_MPLL2>,
+			 <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>;
+
 		assigned-clocks = <&clkc CLKID_MPLL2>,
 				  <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>;

arch/arm64/boot/dts/amlogic/meson-g12b-odroid-go-ultra.dts

···
 				"Internal Speakers", "Speaker Amplifier OUTL",
 				"Internal Speakers", "Speaker Amplifier OUTR";
 
+		clocks = <&clkc CLKID_MPLL2>,
+			 <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>;
+
 		assigned-clocks = <&clkc CLKID_MPLL2>,
 				  <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>;

arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi

···
 				"Lineout", "U19 OUTL",
 				"Lineout", "U19 OUTR";
 
+		clocks = <&clkc CLKID_MPLL2>,
+			 <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>;
+
 		assigned-clocks = <&clkc CLKID_MPLL2>,
 				  <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>;

arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2l.dts

···
 				"TODDR_B IN 6", "TDMIN_LB OUT",
 				"TODDR_C IN 6", "TDMIN_LB OUT";
 
+		clocks = <&clkc CLKID_MPLL2>,
+			 <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>;
+
 		assigned-clocks = <&clkc CLKID_MPLL2>,
 				  <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>;

arch/arm64/boot/dts/amlogic/meson-g12b-radxa-zero2.dts

···
 				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
 				"TDM_B Playback", "TDMOUT_B OUT";
 
+		clocks = <&clkc CLKID_MPLL2>,
+			 <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>;
+
 		assigned-clocks = <&clkc CLKID_MPLL2>,
 				  <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>;

arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts

···
 				"SPDIFOUT_A IN 1", "FRDDR_B OUT 3",
 				"SPDIFOUT_A IN 2", "FRDDR_C OUT 3";
 
+		clocks = <&clkc CLKID_MPLL2>,
+			 <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>;
+
 		assigned-clocks = <&clkc CLKID_MPLL2>,
 				  <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>;

arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi

···
 				"AU2 INR", "ACODEC LORN",
 				"7J4-14 LEFT", "AU2 OUTL",
 				"7J4-11 RIGHT", "AU2 OUTR";
+		clocks = <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>,
+			 <&clkc CLKID_MPLL2>;
+
 		assigned-clocks = <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>,
 				  <&clkc CLKID_MPLL2>;

arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi

···
 				"AU2 INR", "ACODEC LORN",
 				"Lineout", "AU2 OUTL",
 				"Lineout", "AU2 OUTR";
+		clocks = <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>,
+			 <&clkc CLKID_MPLL2>;
+
 		assigned-clocks = <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>,
 				  <&clkc CLKID_MPLL2>;

arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts

···
 	sound {
 		compatible = "amlogic,gx-sound-card";
 		model = "KII-PRO";
+		clocks = <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>,
+			 <&clkc CLKID_MPLL2>;
+
 		assigned-clocks = <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>,
 				  <&clkc CLKID_MPLL2>;

arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts

···
 	sound {
 		compatible = "amlogic,gx-sound-card";
 		model = "NANOPI-K2";
+		clocks = <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>,
+			 <&clkc CLKID_MPLL2>;
+
 		assigned-clocks = <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>,
 				  <&clkc CLKID_MPLL2>;

arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts

···
 	sound {
 		compatible = "amlogic,gx-sound-card";
 		model = "NEXBOX-A95X";
+		clocks = <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>,
+			 <&clkc CLKID_MPLL2>;
+
 		assigned-clocks = <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>,
 				  <&clkc CLKID_MPLL2>;

arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts

···
 	sound {
 		compatible = "amlogic,gx-sound-card";
 		model = "ODROID-C2";
+		clocks = <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>,
+			 <&clkc CLKID_MPLL2>;
+
 		assigned-clocks = <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>,
 				  <&clkc CLKID_MPLL2>;

arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts

···
 	sound {
 		compatible = "amlogic,gx-sound-card";
 		model = "P200";
+		clocks = <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>,
+			 <&clkc CLKID_MPLL2>;
+
 		assigned-clocks = <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>,
 				  <&clkc CLKID_MPLL2>;

arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dts

···
 	sound {
 		compatible = "amlogic,gx-sound-card";
 		model = "P201";
+		clocks = <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>,
+			 <&clkc CLKID_MPLL2>;
+
 		assigned-clocks = <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>,
 				  <&clkc CLKID_MPLL2>;

arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi

···
 	sound {
 		compatible = "amlogic,gx-sound-card";
 		model = "VEGA-S95";
+		clocks = <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>,
+			 <&clkc CLKID_MPLL2>;
+
 		assigned-clocks = <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>,
 				  <&clkc CLKID_MPLL2>;

arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts

···
 	sound {
 		compatible = "amlogic,gx-sound-card";
 		model = "WETEK-HUB";
+		clocks = <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>,
+			 <&clkc CLKID_MPLL2>;
+
 		assigned-clocks = <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>,
 				  <&clkc CLKID_MPLL2>;

arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts

···
 	sound {
 		compatible = "amlogic,gx-sound-card";
 		model = "WETEK-PLAY2";
+		clocks = <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>,
+			 <&clkc CLKID_MPLL2>;
+
 		assigned-clocks = <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>,
 				  <&clkc CLKID_MPLL2>;

arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dts

···
 				"Speaker", "9J5-2 RIGHT";
 		audio-routing = "9J5-3 LEFT", "ACODEC LOLN",
 				"9J5-2 RIGHT", "ACODEC LORN";
+		clocks = <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>,
+			 <&clkc CLKID_MPLL2>;
+
 		assigned-clocks = <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>,
 				  <&clkc CLKID_MPLL2>;

arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts

···
 				"AU2 INR", "ACODEC LORN",
 				"Lineout", "AU2 OUTL",
 				"Lineout", "AU2 OUTR";
+		clocks = <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>,
+			 <&clkc CLKID_MPLL2>;
+
 		assigned-clocks = <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>,
 				  <&clkc CLKID_MPLL2>;

arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts

···
 	sound {
 		compatible = "amlogic,gx-sound-card";
 		model = "KHADAS-VIM";
+		clocks = <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>,
+			 <&clkc CLKID_MPLL2>;
+
 		assigned-clocks = <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>,
 				  <&clkc CLKID_MPLL2>;

arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc-v2.dts

···
 	sound {
 		compatible = "amlogic,gx-sound-card";
 		model = "LIBRETECH-CC-V2";
+		clocks = <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>,
+			 <&clkc CLKID_MPLL2>;
+
 		assigned-clocks = <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>,
 				  <&clkc CLKID_MPLL2>;

arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts

···
 				"AU2 INR", "ACODEC LORN",
 				"Lineout", "AU2 OUTL",
 				"Lineout", "AU2 OUTR";
+		clocks = <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>,
+			 <&clkc CLKID_MPLL2>;
+
 		assigned-clocks = <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>,
 				  <&clkc CLKID_MPLL2>;

arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts

···
 				"AU2 INR", "ACODEC LORN",
 				"Lineout", "AU2 OUTL",
 				"Lineout", "AU2 OUTR";
+		clocks = <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>,
+			 <&clkc CLKID_MPLL2>;
+
 		assigned-clocks = <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>,
 				  <&clkc CLKID_MPLL2>;

arch/arm64/boot/dts/amlogic/meson-gxl-s905x-vero4k.dts

···
 				"AU2 INR", "ACODEC LORN",
 				"Lineout", "AU2 OUTL",
 				"Lineout", "AU2 OUTR";
+
+		clocks = <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>,
+			 <&clkc CLKID_MPLL2>;
+
 		assigned-clocks = <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>,
 				  <&clkc CLKID_MPLL2>;

arch/arm64/boot/dts/amlogic/meson-gxlx-s905l-p271.dts

···
 	};
 };
 
-&saradc {
-	compatible = "amlogic,meson-gxlx-saradc", "amlogic,meson-saradc";
-};
-
 &usb {
 	dr_mode = "host";
 };

arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts

···
 	sound {
 		compatible = "amlogic,gx-sound-card";
 		model = "KHADAS-VIM2";
+		clocks = <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>,
+			 <&clkc CLKID_MPLL2>;
+
 		assigned-clocks = <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>,
 				  <&clkc CLKID_MPLL2>;

arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts

···
 	sound {
 		compatible = "amlogic,gx-sound-card";
 		model = "NEXBOX-A1";
+		clocks = <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>,
+			 <&clkc CLKID_MPLL2>;
+
 		assigned-clocks = <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>,
 				  <&clkc CLKID_MPLL2>;

arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts

···
 	sound {
 		compatible = "amlogic,gx-sound-card";
 		model = "RBOX-PRO";
+		clocks = <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>,
+			 <&clkc CLKID_MPLL2>;
+
 		assigned-clocks = <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>,
 				  <&clkc CLKID_MPLL2>;

arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi

···
 				"TODDR_B IN 0", "TDMIN_A OUT",
 				"TODDR_C IN 0", "TDMIN_A OUT";
 
+		clocks = <&clkc CLKID_MPLL2>,
+			 <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>;
+
 		assigned-clocks = <&clkc CLKID_MPLL2>,
 				  <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>;

arch/arm64/boot/dts/amlogic/meson-libretech-cottonwood.dtsi

···
 				 <&tdmin_a>, <&tdmin_b>, <&tdmin_c>,
 				 <&dioo2133>;
 
+		clocks = <&clkc CLKID_MPLL2>,
+			 <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>;
+
 		assigned-clocks = <&clkc CLKID_MPLL2>,
 				  <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>;

arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts

···
 			no-map;
 		};
 	};
+
+	sdio_32k: sdio-32k {
+		compatible = "pwm-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
+		clocks = <&sdio_32k>;
+		clock-names = "ext_clock";
+	};
+
+	main_12v: regulator-main-12v {
+		compatible = "regulator-fixed";
+		regulator-name = "12V";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+	};
+
+	vddao_3v3: regulator-vddao-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&main_12v>;
+		regulator-always-on;
+	};
+
+	vddio_ao1v8: regulator-vddio-ao1v8 {
+	       compatible = "regulator-fixed";
+	       regulator-name = "VDDIO_AO1V8";
+	       regulator-min-microvolt = <1800000>;
+	       regulator-max-microvolt = <1800000>;
+	       vin-supply = <&vddao_3v3>;
+	       regulator-always-on;
+	};
+
+	/* SY8120B1ABC DC/DC Regulator. */
+	vddcpu: regulator-vddcpu {
+		compatible = "pwm-regulator";
+
+		regulator-name = "VDDCPU";
+		regulator-min-microvolt = <689000>;
+		regulator-max-microvolt = <1049000>;
+
+		vin-supply = <&main_12v>;
+
+		pwms = <&pwm_ij 1 1500 0>;
+		pwm-dutycycle-range = <100 0>;
+
+		regulator-boot-on;
+		regulator-always-on;
+		/* Voltage Duty-Cycle */
+		voltage-table = <1049000 0>,
+				<1039000 3>,
+				<1029000 6>,
+				<1019000 9>,
+				<1009000 12>,
+				<999000 14>,
+				<989000 17>,
+				<979000 20>,
+				<969000 23>,
+				<959000 26>,
+				<949000 29>,
+				<939000 31>,
+				<929000 34>,
+				<919000 37>,
+				<909000 40>,
+				<899000 43>,
+				<889000 45>,
+				<879000 48>,
+				<869000 51>,
+				<859000 54>,
+				<849000 56>,
+				<839000 59>,
+				<829000 62>,
+				<819000 65>,
+				<809000 68>,
+				<799000 70>,
+				<789000 73>,
+				<779000 76>,
+				<769000 79>,
+				<759000 81>,
+				<749000 84>,
+				<739000 87>,
+				<729000 89>,
+				<719000 92>,
+				<709000 95>,
+				<699000 98>,
+				<689000 100>;
+	};
+};
+
+&pwm_ef {
+	status = "okay";
+	pinctrl-0 = <&pwm_e_pins1>;
+	pinctrl-names = "default";
+};
+
+&pwm_ij {
+	status = "okay";
 };
 
 &uart_b {
···
 	status = "okay";
 	pinctrl-0 = <&remote_pins>;
 	pinctrl-names = "default";
+};
+
+&sdio {
+	pinctrl-0 = <&sdio_pins>;
+	pinctrl-1 = <&sdio_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	bus-width = <4>;
+	cap-sd-highspeed;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	max-frequency = <200000000>;
+	non-removable;
+	disable-wp;
+	no-sd;
+	no-mmc;
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddio_ao1v8>;
+};
+
+&sd {
+	status = "okay";
+	pinctrl-0 = <&sdcard_pins>;
+	pinctrl-1 = <&sdcard_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <200000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddao_3v3>;
 };
 
 &nand {
···
 	pinctrl-names = "default";
 	pinctrl-0 = <&spicc0_pins_x>;
 	cs-gpios = <&gpio GPIOX_10 GPIO_ACTIVE_LOW>;
+};
+
+&ethmac {
+	status = "okay";
+	phy-handle = <&internal_ephy>;
+	phy-mode = "rmii";
 };

arch/arm64/boot/dts/amlogic/meson-s4.dtsi

···
 #include <dt-bindings/clock/amlogic,s4-pll-clkc.h>
 #include <dt-bindings/clock/amlogic,s4-peripherals-clkc.h>
 #include <dt-bindings/power/meson-s4-power.h>
+#include <dt-bindings/reset/amlogic,meson-s4-reset.h>
 
 / {
 	cpus {
···
 					};
 				};
 
+				sdcard_pins: sdcard-pins {
+					mux {
+						groups = "sdcard_d0_c",
+							 "sdcard_d1_c",
+							 "sdcard_d2_c",
+							 "sdcard_d3_c",
+							 "sdcard_clk_c",
+							 "sdcard_cmd_c";
+						function = "sdcard";
+						bias-pull-up;
+						drive-strength-microamp = <4000>;
+					};
+				};
+
+				sdcard_clk_gate_pins: sdcard-clk-gate-pins {
+					mux {
+						groups = "GPIOC_4";
+						function = "gpio_periphs";
+						bias-pull-down;
+						drive-strength-microamp = <4000>;
+					};
+				};
+
+				emmc_pins: emmc-pins {
+					mux-0 {
+						groups = "emmc_nand_d0",
+							 "emmc_nand_d1",
+							 "emmc_nand_d2",
+							 "emmc_nand_d3",
+							 "emmc_nand_d4",
+							 "emmc_nand_d5",
+							 "emmc_nand_d6",
+							 "emmc_nand_d7",
+							 "emmc_cmd";
+						function = "emmc";
+						bias-pull-up;
+						drive-strength-microamp = <4000>;
+					};
+					mux-1 {
+						groups = "emmc_clk";
+						function = "emmc";
+						bias-pull-up;
+						drive-strength-microamp = <4000>;
+					};
+				};
+
+				emmc_ds_pins: emmc-ds-pins {
+					mux {
+						groups = "emmc_nand_ds";
+						function = "emmc";
+						bias-pull-down;
+						drive-strength-microamp = <4000>;
+					};
+				};
+
+				emmc_clk_gate_pins: emmc-clk-gate-pins {
+					mux {
+						groups = "GPIOB_8";
+						function = "gpio_periphs";
+						bias-pull-down;
+						drive-strength-microamp = <4000>;
+					};
+				};
+
+				sdio_pins: sdio-pins {
+					mux {
+						groups = "sdio_d0",
+							 "sdio_d1",
+							 "sdio_d2",
+							 "sdio_d3",
+							 "sdio_clk",
+							 "sdio_cmd";
+						function = "sdio";
+						bias-pull-up;
+						drive-strength-microamp = <4000>;
+					};
+				};
+
+				sdio_clk_gate_pins: sdio-clk-gate-pins {
+					mux {
+						groups = "GPIOX_4";
+						function = "gpio_periphs";
+						bias-pull-down;
+						drive-strength-microamp = <4000>;
+					};
+				};
+
 				spicc0_pins_x: spicc0-pins_x {
 					mux {
 						groups = "spi_a_mosi_x",
···
 				#reset-cells = <1>;
 			};
 
+			sec_ao: ao-secure@10220 {
+				compatible = "amlogic,s4-ao-secure",
+					     "amlogic,meson-gx-ao-secure",
+					     "syscon";
+				reg = <0x0 0x10220 0x0 0x140>;
+				amlogic,has-chip-id;
+			};
+
 			ir: ir@84040 {
 				compatible = "amlogic,meson-s4-ir";
 				reg = <0x0 0x84040 0x0 0x30>;
···
 				#size-cells = <0>;
 				compatible = "snps,dwmac-mdio";
 			};
+		};
+
+		sdio: mmc@fe088000 {
+			compatible = "amlogic,meson-axg-mmc";
+			reg = <0x0 0xfe088000 0x0 0x800>;
+			interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clkc_periphs CLKID_SDEMMC_A>,
+				 <&xtal>,
+				 <&clkc_pll CLKID_FCLK_DIV2>;
+			clock-names = "core", "clkin0", "clkin1";
+			resets = <&reset RESET_SD_EMMC_A>;
+			cap-sdio-irq;
+			keep-power-in-suspend;
+			status = "disabled";
+		};
+
+		sd: mmc@fe08a000 {
+			compatible = "amlogic,meson-axg-mmc";
+			reg = <0x0 0xfe08a000 0x0 0x800>;
+			interrupts = <GIC_SPI 177 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&clkc_periphs CLKID_SDEMMC_B>,
+				 <&clkc_periphs CLKID_SD_EMMC_B>,
+				 <&clkc_pll CLKID_FCLK_DIV2>;
+			clock-names = "core", "clkin0", "clkin1";
+			resets = <&reset RESET_SD_EMMC_B>;
+			status = "disabled";
+		};
+
+		emmc: mmc@fe08c000 {
+			compatible = "amlogic,meson-axg-mmc";
+			reg = <0x0 0xfe08c000 0x0 0x800>;
+			interrupts = <GIC_SPI 178 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&clkc_periphs CLKID_NAND>,
+				 <&xtal>,
+				 <&clkc_pll CLKID_FCLK_DIV2>;
+			clock-names = "core", "clkin0", "clkin1";
+			resets = <&reset RESET_NAND_EMMC>;
+			no-sdio;
+			no-sd;
+			status = "disabled";
 		};
 	};
 };

arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air-gbit.dts

···
 				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
 				"TDM_B Playback", "TDMOUT_B OUT";
 
+		clocks = <&clkc CLKID_MPLL2>,
+			 <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>;
+
 		assigned-clocks = <&clkc CLKID_MPLL2>,
 				  <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>;

arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air.dts

···
 				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
 				"TDM_B Playback", "TDMOUT_B OUT";
 
+		clocks = <&clkc CLKID_MPLL2>,
+			 <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>;
+
 		assigned-clocks = <&clkc CLKID_MPLL2>,
 				  <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>;

arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m2-pro.dts

···
 				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
 				"TDM_B Playback", "TDMOUT_B OUT";
 
+		clocks = <&clkc CLKID_MPLL2>,
+			 <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>;
+
 		assigned-clocks = <&clkc CLKID_MPLL2>,
 				  <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>;

arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts

···
 				"Lineout", "ACODEC LOLP",
 				"Lineout", "ACODEC LORP";
 
+		clocks = <&clkc CLKID_MPLL2>,
+			 <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>;
+
 		assigned-clocks = <&clkc CLKID_MPLL2>,
 				  <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>;

arch/arm64/boot/dts/amlogic/meson-sm1-h96-max.dts

···
 				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
 				"TDM_B Playback", "TDMOUT_B OUT";
 
+		clocks = <&clkc CLKID_MPLL2>,
+			 <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>;
+
 		assigned-clocks = <&clkc CLKID_MPLL2>,
 				  <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>;

arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi

···
 				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
 				"TDM_B Playback", "TDMOUT_B OUT";
 
+		clocks = <&clkc CLKID_MPLL2>,
+			 <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>;
+
 		assigned-clocks = <&clkc CLKID_MPLL2>,
 				  <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>;

arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts

···
 				"TODDR_B IN 1", "TDMIN_B OUT",
 				"TODDR_C IN 1", "TDMIN_B OUT";
 
+		clocks = <&clkc CLKID_MPLL2>,
+			 <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>;
+
 		assigned-clocks = <&clkc CLKID_MPLL2>,
 				  <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>;

arch/arm64/boot/dts/amlogic/meson-sm1-x96-air-gbit.dts

···
 				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
 				"TDM_B Playback", "TDMOUT_B OUT";
 
+		clocks = <&clkc CLKID_MPLL2>,
+			 <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>;
+
 		assigned-clocks = <&clkc CLKID_MPLL2>,
 				  <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>;

arch/arm64/boot/dts/amlogic/meson-sm1-x96-air.dts

···
 				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
 				"TDM_B Playback", "TDMOUT_B OUT";
 
+		clocks = <&clkc CLKID_MPLL2>,
+			 <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>;
+
 		assigned-clocks = <&clkc CLKID_MPLL2>,
 				  <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>;