Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (30 commits)
e1000: fix virtualization bug
bonding: fix alb mode locking regression
Bluetooth: Fix issue with sysfs handling for connections
usbnet: CDC EEM support (v5)
tcp: Fix tcp_prequeue() to get correct rto_min value
ehea: fix invalid pointer access
ne2k-pci: Do not register device until initialized.
Subject: [PATCH] br2684: restore net_dev initialization
net: Only store high 16 bits of kernel generated filter priorities
virtio_net: Fix function name typo
virtio_net: Cleanup command queue scatterlist usage
bonding: correct the cleanup in bond_create()
virtio: add missing include to virtio_net.h
smsc95xx: add support for LAN9512 and LAN9514
smsc95xx: configure LED outputs
netconsole: take care of NETDEV_UNREGISTER event
xt_socket: checks for the state of nf_conntrack
bonding: bond_slave_info_query() fix
cxgb3: fixing gcc 4.4 compiler warning: suggest parentheses around operand of ‘!’
netfilter: use likely() in xt_info_rdlock_bh()
...

drivers/net/bonding/bond_alb.c

···
  * Called with RTNL
  */
 int bond_alb_set_mac_address(struct net_device *bond_dev, void *addr)
-	__releases(&bond->curr_slave_lock)
-	__releases(&bond->lock)
 	__acquires(&bond->lock)
-	__acquires(&bond->curr_slave_lock)
+	__releases(&bond->lock)
 {
 	struct bonding *bond = netdev_priv(bond_dev);
 	struct sockaddr *sa = addr;
···
 		}
 	}
 
-	write_unlock_bh(&bond->curr_slave_lock);
-	read_unlock(&bond->lock);
-
 	if (swap_slave) {
 		alb_swap_mac_addr(bond, swap_slave, bond->curr_active_slave);
 		alb_fasten_mac_swap(bond, swap_slave, bond->curr_active_slave);
···
 		alb_set_slave_mac_addr(bond->curr_active_slave, bond_dev->dev_addr,
 				       bond->alb_info.rlb_enabled);
 
+		read_lock(&bond->lock);
 		alb_send_learning_packets(bond->curr_active_slave, bond_dev->dev_addr);
 		if (bond->alb_info.rlb_enabled) {
 			/* inform clients mac address has changed */
 			rlb_req_update_slave_clients(bond, bond->curr_active_slave);
 		}
+		read_unlock(&bond->lock);
 	}
-
-	read_lock(&bond->lock);
-	write_lock_bh(&bond->curr_slave_lock);
 
 	return 0;
 }

drivers/net/bonding/bond_main.c

···
 {
 	struct bonding *bond = netdev_priv(bond_dev);
 	struct slave *slave;
-	int i, found = 0;
-
-	if (info->slave_id < 0) {
-		return -ENODEV;
-	}
+	int i, res = -ENODEV;
 
 	read_lock(&bond->lock);
 
 	bond_for_each_slave(bond, slave, i) {
 		if (i == (int)info->slave_id) {
-			found = 1;
+			res = 0;
+			strcpy(info->slave_name, slave->dev->name);
+			info->link = slave->link;
+			info->state = slave->state;
+			info->link_failure_count = slave->link_failure_count;
 			break;
 		}
 	}
 
 	read_unlock(&bond->lock);
 
-	if (found) {
-		strcpy(info->slave_name, slave->dev->name);
-		info->link = slave->link;
-		info->state = slave->state;
-		info->link_failure_count = slave->link_failure_count;
-	} else {
-		return -ENODEV;
-	}
-
-	return 0;
+	return res;
 }
 
 /*-------------------------------- Monitoring -------------------------------*/
···
 	up_write(&bonding_rwsem);
 	rtnl_unlock(); /* allows sysfs registration of net device */
 	res = bond_create_sysfs_entry(netdev_priv(bond_dev));
-	if (res < 0) {
-		rtnl_lock();
-		down_write(&bonding_rwsem);
-		bond_deinit(bond_dev);
-		unregister_netdevice(bond_dev);
-		goto out_rtnl;
-	}
+	if (res < 0)
+		goto out_unreg;
 
 	return 0;
 
+out_unreg:
+	rtnl_lock();
+	down_write(&bonding_rwsem);
+	unregister_netdevice(bond_dev);
 out_bond:
 	bond_deinit(bond_dev);
 out_netdev:

drivers/net/cxgb3/t3_hw.c

···
 
 	adapter->params.info = ai;
 	adapter->params.nports = ai->nports0 + ai->nports1;
-	adapter->params.chan_map = !!ai->nports0 | (!!ai->nports1 << 1);
+	adapter->params.chan_map = (!!ai->nports0) | (!!ai->nports1 << 1);
 	adapter->params.rev = t3_read_reg(adapter, A_PL_REV);
 	/*
 	 * We used to only run the "adapter check task" once a second if

drivers/net/e1000/e1000_main.c

···
 	struct e1000_hw *hw = &adapter->hw;
 	u32 rctl, icr = er32(ICR);
 
-	if (unlikely((!icr) || test_bit(__E1000_RESETTING, &adapter->flags)))
+	if (unlikely((!icr) || test_bit(__E1000_DOWN, &adapter->flags)))
 		return IRQ_NONE;  /* Not our interrupt */
 
 	/* IMS will not auto-mask if INT_ASSERTED is not set, and if it is

drivers/net/ehea/ehea.h

···
 #include <asm/io.h>
 
 #define DRV_NAME	"ehea"
-#define DRV_VERSION	"EHEA_0100"
+#define DRV_VERSION	"EHEA_0101"
 
 /* eHEA capability flags */
 #define DLPAR_PORT_ADD_REM 1

drivers/net/ehea/ehea_main.c

···
 	x &= (arr_len - 1);
 
 	pref = skb_array[x];
-	prefetchw(pref);
-	prefetchw(pref + EHEA_CACHE_LINE);
+	if (pref) {
+		prefetchw(pref);
+		prefetchw(pref + EHEA_CACHE_LINE);
 
-	pref = (skb_array[x]->data);
-	prefetch(pref);
-	prefetch(pref + EHEA_CACHE_LINE);
-	prefetch(pref + EHEA_CACHE_LINE * 2);
-	prefetch(pref + EHEA_CACHE_LINE * 3);
+		pref = (skb_array[x]->data);
+		prefetch(pref);
+		prefetch(pref + EHEA_CACHE_LINE);
+		prefetch(pref + EHEA_CACHE_LINE * 2);
+		prefetch(pref + EHEA_CACHE_LINE * 3);
+	}
+
 	skb = skb_array[skb_index];
 	skb_array[skb_index] = NULL;
 	return skb;
···
 	x &= (arr_len - 1);
 
 	pref = skb_array[x];
-	prefetchw(pref);
-	prefetchw(pref + EHEA_CACHE_LINE);
+	if (pref) {
+		prefetchw(pref);
+		prefetchw(pref + EHEA_CACHE_LINE);
 
-	pref = (skb_array[x]->data);
-	prefetchw(pref);
-	prefetchw(pref + EHEA_CACHE_LINE);
+		pref = (skb_array[x]->data);
+		prefetchw(pref);
+		prefetchw(pref + EHEA_CACHE_LINE);
+	}
 
 	skb = skb_array[wqe_index];
 	skb_array[wqe_index] = NULL;

drivers/net/mv643xx_eth.c

···
 	struct work_struct tx_timeout_task;
 
 	struct napi_struct napi;
+	u8 oom;
 	u8 work_link;
 	u8 work_tx;
 	u8 work_tx_end;
 	u8 work_rx;
 	u8 work_rx_refill;
-	u8 work_rx_oom;
 
 	int skb_size;
 	struct sk_buff_head rx_recycle;
···
 					    dma_get_cache_alignment() - 1);
 
 		if (skb == NULL) {
-			mp->work_rx_oom |= 1 << rxq->index;
+			mp->oom = 1;
 			goto oom;
 		}
 
···
 
 	spin_lock_bh(&mp->mib_counters_lock);
 	p->good_octets_received += mib_read(mp, 0x00);
-	p->good_octets_received += (u64)mib_read(mp, 0x04) << 32;
 	p->bad_octets_received += mib_read(mp, 0x08);
 	p->internal_mac_transmit_err += mib_read(mp, 0x0c);
 	p->good_frames_received += mib_read(mp, 0x10);
···
 	p->frames_512_to_1023_octets += mib_read(mp, 0x30);
 	p->frames_1024_to_max_octets += mib_read(mp, 0x34);
 	p->good_octets_sent += mib_read(mp, 0x38);
-	p->good_octets_sent += (u64)mib_read(mp, 0x3c) << 32;
 	p->good_frames_sent += mib_read(mp, 0x40);
 	p->excessive_collision += mib_read(mp, 0x44);
 	p->multicast_frames_sent += mib_read(mp, 0x48);
···
 
 	mp = container_of(napi, struct mv643xx_eth_private, napi);
 
-	mp->work_rx_refill |= mp->work_rx_oom;
-	mp->work_rx_oom = 0;
+	if (unlikely(mp->oom)) {
+		mp->oom = 0;
+		del_timer(&mp->rx_oom);
+	}
 
 	work_done = 0;
 	while (work_done < budget) {
···
 			continue;
 		}
 
-		queue_mask = mp->work_tx | mp->work_tx_end |
-				mp->work_rx | mp->work_rx_refill;
+		queue_mask = mp->work_tx | mp->work_tx_end | mp->work_rx;
+		if (likely(!mp->oom))
+			queue_mask |= mp->work_rx_refill;
+
 		if (!queue_mask) {
 			if (mv643xx_eth_collect_events(mp))
 				continue;
···
 			txq_maybe_wake(mp->txq + queue);
 		} else if (mp->work_rx & queue_mask) {
 			work_done += rxq_process(mp->rxq + queue, work_tbd);
-		} else if (mp->work_rx_refill & queue_mask) {
+		} else if (!mp->oom && (mp->work_rx_refill & queue_mask)) {
 			work_done += rxq_refill(mp->rxq + queue, work_tbd);
 		} else {
 			BUG();
···
 	}
 
 	if (work_done < budget) {
-		if (mp->work_rx_oom)
+		if (mp->oom)
 			mod_timer(&mp->rx_oom, jiffies + (HZ / 10));
 		napi_complete(napi);
 		wrlp(mp, INT_MASK, INT_TX_END | INT_RX | INT_EXT);
···
 		rxq_refill(mp->rxq + i, INT_MAX);
 	}
 
-	if (mp->work_rx_oom) {
+	if (mp->oom) {
 		mp->rx_oom.expires = jiffies + (HZ / 10);
 		add_timer(&mp->rx_oom);
 	}

drivers/net/ne2k-pci.c

···
 	dev->ethtool_ops = &ne2k_pci_ethtool_ops;
 	NS8390_init(dev, 0);
 
+	memcpy(dev->dev_addr, SA_prom, 6);
+	memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len);
+
 	i = register_netdev(dev);
 	if (i)
 		goto err_out_free_netdev;
 
-	for(i = 0; i < 6; i++)
-		dev->dev_addr[i] = SA_prom[i];
 	printk("%s: %s found at %#lx, IRQ %d, %pM.\n",
 	       dev->name, pci_clone_list[chip_idx].name, ioaddr, dev->irq,
 	       dev->dev_addr);
-
-	memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len);
 
 	return 0;
 

drivers/net/netconsole.c

···
 	struct netconsole_target *nt;
 	struct net_device *dev = ptr;
 
-	if (!(event == NETDEV_CHANGENAME))
+	if (!(event == NETDEV_CHANGENAME || event == NETDEV_UNREGISTER))
 		goto done;
 
 	spin_lock_irqsave(&target_list_lock, flags);
···
 			switch (event) {
 			case NETDEV_CHANGENAME:
 				strlcpy(nt->np.dev_name, dev->name, IFNAMSIZ);
+				break;
+			case NETDEV_UNREGISTER:
+				if (!nt->enabled)
+					break;
+				netpoll_cleanup(&nt->np);
+				nt->enabled = 0;
+				printk(KERN_INFO "netconsole: network logging stopped"
+					", interface %s unregistered\n",
+					dev->name);
 				break;
 			}
 		}

drivers/net/usb/Kconfig

···
 	  IEEE 802 "local assignment" bit is set in the address, a "usbX"
 	  name is used instead.
 
+config USB_NET_CDC_EEM
+	tristate "CDC EEM support"
+	depends on USB_USBNET && EXPERIMENTAL
+	help
+	  This option supports devices conforming to the Communication Device
+	  Class (CDC) Ethernet Emulation Model, a specification that's easy to
+	  implement in device firmware.  The CDC EEM specifications are available
+	  from <http://www.usb.org/>.
+
+	  This driver creates an interface named "ethX", where X depends on
+	  what other networking devices you have in use.  However, if the
+	  IEEE 802 "local assignment" bit is set in the address, a "usbX"
+	  name is used instead.
+
 config USB_NET_DM9601
 	tristate "Davicom DM9601 based USB 1.1 10/100 ethernet devices"
 	depends on USB_USBNET

drivers/net/usb/Makefile

···
 obj-$(CONFIG_USB_HSO)		+= hso.o
 obj-$(CONFIG_USB_NET_AX8817X)	+= asix.o
 obj-$(CONFIG_USB_NET_CDCETHER)	+= cdc_ether.o
+obj-$(CONFIG_USB_NET_CDC_EEM)	+= cdc_eem.o
 obj-$(CONFIG_USB_NET_DM9601)	+= dm9601.o
 obj-$(CONFIG_USB_NET_SMSC95XX)	+= smsc95xx.o
 obj-$(CONFIG_USB_NET_GL620A)	+= gl620a.o

drivers/net/usb/cdc_eem.c

···
+/*
+ * USB CDC EEM network interface driver
+ * Copyright (C) 2009 Oberthur Technologies
+ * by Omar Laazimani, Olivier Condemine
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ctype.h>
+#include <linux/ethtool.h>
+#include <linux/workqueue.h>
+#include <linux/mii.h>
+#include <linux/usb.h>
+#include <linux/crc32.h>
+#include <linux/usb/cdc.h>
+#include <linux/usb/usbnet.h>
+
+
+/*
+ * This driver is an implementation of the CDC "Ethernet Emulation
+ * Model" (EEM) specification, which encapsulates Ethernet frames
+ * for transport over USB using a simpler USB device model than the
+ * previous CDC "Ethernet Control Model" (ECM, or "CDC Ethernet").
+ *
+ * For details, see www.usb.org/developers/devclass_docs/CDC_EEM10.pdf
+ *
+ * This version has been tested with GIGAntIC WuaoW SIM Smart Card on 2.6.24,
+ * 2.6.27 and 2.6.30rc2 kernel.
+ * It has also been validated on Openmoko Om 2008.12 (based on 2.6.24 kernel).
+ * build on 23-April-2009
+ */
+
+#define EEM_HEAD	2		/* 2 byte header */
+
+/*-------------------------------------------------------------------------*/
+
+static void eem_linkcmd_complete(struct urb *urb)
+{
+	dev_kfree_skb(urb->context);
+	usb_free_urb(urb);
+}
+
+static void eem_linkcmd(struct usbnet *dev, struct sk_buff *skb)
+{
+	struct urb		*urb;
+	int			status;
+
+	urb = usb_alloc_urb(0, GFP_ATOMIC);
+	if (!urb)
+		goto fail;
+
+	usb_fill_bulk_urb(urb, dev->udev, dev->out,
+			skb->data, skb->len, eem_linkcmd_complete, skb);
+
+	status = usb_submit_urb(urb, GFP_ATOMIC);
+	if (status) {
+		usb_free_urb(urb);
+fail:
+		dev_kfree_skb(skb);
+		devwarn(dev, "link cmd failure\n");
+		return;
+	}
+}
+
+static int eem_bind(struct usbnet *dev, struct usb_interface *intf)
+{
+	int status = 0;
+
+	status = usbnet_get_endpoints(dev, intf);
+	if (status < 0) {
+		usb_set_intfdata(intf, NULL);
+		usb_driver_release_interface(driver_of(intf), intf);
+		return status;
+	}
+
+	/* no jumbogram (16K) support for now */
+
+	dev->net->hard_header_len += EEM_HEAD + ETH_FCS_LEN;
+
+	return 0;
+}
+
+/*
+ * EEM permits packing multiple Ethernet frames into USB transfers
+ * (a "bundle"), but for TX we don't try to do that.
+ */
+static struct sk_buff *eem_tx_fixup(struct usbnet *dev, struct sk_buff *skb,
+				       gfp_t flags)
+{
+	struct sk_buff	*skb2 = NULL;
+	u16		len = skb->len;
+	u32		crc = 0;
+	int		padlen = 0;
+
+	/* When ((len + EEM_HEAD + ETH_FCS_LEN) % dev->maxpacket) is
+	 * zero, stick two bytes of zero length EEM packet on the end.
+	 * Else the framework would add invalid single byte padding,
+	 * since it can't know whether ZLPs will be handled right by
+	 * all the relevant hardware and software.
+	 */
+	if (!((len + EEM_HEAD + ETH_FCS_LEN) % dev->maxpacket))
+		padlen += 2;
+
+	if (!skb_cloned(skb)) {
+		int	headroom = skb_headroom(skb);
+		int	tailroom = skb_tailroom(skb);
+
+		if ((tailroom >= ETH_FCS_LEN + padlen)
+				&& (headroom >= EEM_HEAD))
+			goto done;
+
+		if ((headroom + tailroom)
+				> (EEM_HEAD + ETH_FCS_LEN + padlen)) {
+			skb->data = memmove(skb->head +
+					EEM_HEAD,
+					skb->data,
+					skb->len);
+			skb_set_tail_pointer(skb, len);
+			goto done;
+		}
+	}
+
+	skb2 = skb_copy_expand(skb, EEM_HEAD, ETH_FCS_LEN + padlen, flags);
+	if (!skb2)
+		return NULL;
+
+	dev_kfree_skb_any(skb);
+	skb = skb2;
+
+done:
+	/* we don't use the "no Ethernet CRC" option */
+	crc = crc32_le(~0, skb->data, skb->len);
+	crc = ~crc;
+
+	put_unaligned_le32(crc, skb_put(skb, 4));
+
+	/* EEM packet header format:
+	 * b0..13:	length of ethernet frame
+	 * b14:		bmCRC (1 == valid Ethernet CRC)
+	 * b15:		bmType (0 == data)
+	 */
+	len = skb->len;
+	put_unaligned_le16(BIT(14) | len, skb_push(skb, 2));
+
+	/* Bundle a zero length EEM packet if needed */
+	if (padlen)
+		put_unaligned_le16(0, skb_put(skb, 2));
+
+	return skb;
+}
+
+static int eem_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
+{
+	/*
+	 * Our task here is to strip off framing, leaving skb with one
+	 * data frame for the usbnet framework code to process.  But we
+	 * may have received multiple EEM payloads, or command payloads.
+	 * So we must process _everything_ as if it's a header, except
+	 * maybe the last data payload
+	 *
+	 * REVISIT the framework needs updating so that when we consume
+	 * all payloads (the last or only message was a command, or a
+	 * zero length EEM packet) that is not accounted as an rx_error.
+	 */
+	do {
+		struct sk_buff	*skb2 = NULL;
+		u16		header;
+		u16		len = 0;
+
+		/* incomplete EEM header? */
+		if (skb->len < EEM_HEAD)
+			return 0;
+
+		/*
+		 * EEM packet header format:
+		 * b0..14:	EEM type dependant (Data or Command)
+		 * b15:		bmType
+		 */
+		header = get_unaligned_le16(skb->data);
+		skb_pull(skb, EEM_HEAD);
+
+		/*
+		 * The bmType bit helps to denote when EEM
+		 * packet is data or command :
+		 *	bmType = 0	: EEM data payload
+		 *	bmType = 1	: EEM (link) command
+		 */
+		if (header & BIT(15)) {
+			u16	bmEEMCmd;
+
+			/*
+			 * EEM (link) command packet:
+			 * b0..10:	bmEEMCmdParam
+			 * b11..13:	bmEEMCmd
+			 * b14:		bmReserved (must be 0)
+			 * b15:		1 (EEM command)
+			 */
+			if (header & BIT(14)) {
+				devdbg(dev, "reserved command %04x\n", header);
+				continue;
+			}
+
+			bmEEMCmd = (header >> 11) & 0x7;
+			switch (bmEEMCmd) {
+
+			/* Responding to echo requests is mandatory. */
+			case 0:		/* Echo command */
+				len = header & 0x7FF;
+
+				/* bogus command? */
+				if (skb->len < len)
+					return 0;
+
+				skb2 = skb_clone(skb, GFP_ATOMIC);
+				if (unlikely(!skb2))
+					goto next;
+				skb_trim(skb2, len);
+				put_unaligned_le16(BIT(15) | (1 << 11) | len,
+						skb_push(skb2, 2));
+				eem_linkcmd(dev, skb2);
+				break;
+
+			/*
+			 * Host may choose to ignore hints.
+			 *  - suspend: peripheral ready to suspend
+			 *  - response: suggest N millisec polling
+			 *  - response complete: suggest N sec polling
+			 */
+			case 2:		/* Suspend hint */
+			case 3:		/* Response hint */
+			case 4:		/* Response complete hint */
+				continue;
+
+			/*
+			 * Hosts should never receive host-to-peripheral
+			 * or reserved command codes; or responses to an
+			 * echo command we didn't send.
+			 */
+			case 1:		/* Echo response */
+			case 5:		/* Tickle */
+			default:	/* reserved */
+				devwarn(dev, "unexpected link command %d\n",
+						bmEEMCmd);
+				continue;
+			}
+
+		} else {
+			u32	crc, crc2;
+			int	is_last;
+
+			/* zero length EEM packet? */
+			if (header == 0)
+				continue;
+
+			/*
+			 * EEM data packet header :
+			 * b0..13:	length of ethernet frame
+			 * b14:		bmCRC
+			 * b15:		0 (EEM data)
+			 */
+			len = header & 0x3FFF;
+
+			/* bogus EEM payload? */
+			if (skb->len < len)
+				return 0;
+
+			/* bogus ethernet frame? */
+			if (len < (ETH_HLEN + ETH_FCS_LEN))
+				goto next;
+
+			/*
+			 * Treat the last payload differently: framework
+			 * code expects our "fixup" to have stripped off
+			 * headers, so "skb" is a data packet (or error).
+			 * Else if it's not the last payload, keep "skb"
+			 * for further processing.
+			 */
+			is_last = (len == skb->len);
+			if (is_last)
+				skb2 = skb;
+			else {
+				skb2 = skb_clone(skb, GFP_ATOMIC);
+				if (unlikely(!skb2))
+					return 0;
+			}
+
+			crc = get_unaligned_le32(skb2->data
+					+ len - ETH_FCS_LEN);
+			skb_trim(skb2, len - ETH_FCS_LEN);
+
+			/*
+			 * The bmCRC helps to denote when the CRC field in
+			 * the Ethernet frame contains a calculated CRC:
+			 *	bmCRC = 1	: CRC is calculated
+			 *	bmCRC = 0	: CRC = 0xDEADBEEF
+			 */
+			if (header & BIT(14))
+				crc2 = ~crc32_le(~0, skb2->data, len);
+			else
+				crc2 = 0xdeadbeef;
+
+			if (is_last)
+				return crc == crc2;
+
+			if (unlikely(crc != crc2)) {
+				dev->stats.rx_errors++;
+				dev_kfree_skb_any(skb2);
+			} else
+				usbnet_skb_return(dev, skb2);
+		}
+
+next:
+		skb_pull(skb, len);
+	} while (skb->len);
+
+	return 1;
+}
+
+static const struct driver_info eem_info = {
+	.description =	"CDC EEM Device",
+	.flags =	FLAG_ETHER,
+	.bind =		eem_bind,
+	.rx_fixup =	eem_rx_fixup,
+	.tx_fixup =	eem_tx_fixup,
+};
+
+/*-------------------------------------------------------------------------*/
+
+static const struct usb_device_id products[] = {
+{
+	USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_EEM,
+			USB_CDC_PROTO_EEM),
+	.driver_info = (unsigned long) &eem_info,
+},
+{
+	/* EMPTY == end of list */
+},
+};
+MODULE_DEVICE_TABLE(usb, products);
+
+static struct usb_driver eem_driver = {
+	.name =		"cdc_eem",
+	.id_table =	products,
+	.probe =	usbnet_probe,
+	.disconnect =	usbnet_disconnect,
+	.suspend =	usbnet_suspend,
+	.resume =	usbnet_resume,
+};
+
+
+static int __init eem_init(void)
+{
+	return usb_register(&eem_driver);
+}
+module_init(eem_init);
+
+static void __exit eem_exit(void)
+{
+	usb_deregister(&eem_driver);
+}
+module_exit(eem_exit);
+
+MODULE_AUTHOR("Omar Laazimani <[e-mail]>");
+MODULE_DESCRIPTION("USB CDC EEM");
+MODULE_LICENSE("GPL");

drivers/net/usb/smsc95xx.c

···
 	if (netif_msg_ifup(dev))
 		devdbg(dev, "ID_REV = 0x%08x", read_buf);
 
+	/* Configure GPIO pins as LED outputs */
+	write_buf = LED_GPIO_CFG_SPD_LED | LED_GPIO_CFG_LNK_LED |
+		LED_GPIO_CFG_FDX_LED;
+	ret = smsc95xx_write_reg(dev, LED_GPIO_CFG, write_buf);
+	if (ret < 0) {
+		devwarn(dev, "Failed to write LED_GPIO_CFG register, ret=%d",
+			ret);
+		return ret;
+	}
+
 	/* Init Tx */
 	write_buf = 0;
 	ret = smsc95xx_write_reg(dev, FLOW, write_buf);
···
 	{
 		/* SMSC9500 USB Ethernet Device */
 		USB_DEVICE(0x0424, 0x9500),
+		.driver_info = (unsigned long) &smsc95xx_info,
+	},
+	{
+		/* SMSC9512/9514 USB Hub & Ethernet Device */
+		USB_DEVICE(0x0424, 0xec00),
 		.driver_info = (unsigned long) &smsc95xx_info,
 	},
 	{ },		/* END */

drivers/net/usb/smsc95xx.h

···
 #define PM_CTL_WUPS_MULTI_		(0x00000003)
 
 #define LED_GPIO_CFG			(0x24)
+#define LED_GPIO_CFG_SPD_LED		(0x01000000)
+#define LED_GPIO_CFG_LNK_LED		(0x00100000)
+#define LED_GPIO_CFG_FDX_LED		(0x00010000)
 
 #define GPIO_CFG			(0x28)
 

drivers/net/virtio_net.c

···
 static bool virtnet_send_command(struct virtnet_info *vi, u8 class, u8 cmd,
 				 struct scatterlist *data, int out, int in)
 {
-	struct scatterlist sg[VIRTNET_SEND_COMMAND_SG_MAX + 2];
+	struct scatterlist *s, sg[VIRTNET_SEND_COMMAND_SG_MAX + 2];
 	struct virtio_net_ctrl_hdr ctrl;
 	virtio_net_ctrl_ack status = ~0;
 	unsigned int tmp;
+	int i;
 
 	if (!virtio_has_feature(vi->vdev, VIRTIO_NET_F_CTRL_VQ)) {
 		BUG();  /* Caller should know better */
···
 	sg_init_table(sg, out + in);
 
 	sg_set_buf(&sg[0], &ctrl, sizeof(ctrl));
-	memcpy(&sg[1], data, sizeof(struct scatterlist) * (out + in - 2));
+	for_each_sg(data, s, out + in - 2, i)
+		sg_set_buf(&sg[i + 1], sg_virt(s), s->length);
 	sg_set_buf(&sg[out + in - 1], &status, sizeof(status));
 
 	if (vi->cvq->vq_ops->add_buf(vi->cvq, sg, out, in, vi) != 0)
···
 	promisc = ((dev->flags & IFF_PROMISC) != 0);
 	allmulti = ((dev->flags & IFF_ALLMULTI) != 0);
 
-	sg_set_buf(sg, &promisc, sizeof(promisc));
+	sg_init_one(sg, &promisc, sizeof(promisc));
 
 	if (!virtnet_send_command(vi, VIRTIO_NET_CTRL_RX,
 				  VIRTIO_NET_CTRL_RX_PROMISC,
···
 		dev_warn(&dev->dev, "Failed to %sable promisc mode.\n",
 			 promisc ? "en" : "dis");
 
-	sg_set_buf(sg, &allmulti, sizeof(allmulti));
+	sg_init_one(sg, &allmulti, sizeof(allmulti));
 
 	if (!virtnet_send_command(vi, VIRTIO_NET_CTRL_RX,
 				  VIRTIO_NET_CTRL_RX_ALLMULTI,
···
 		dev_warn(&dev->dev, "No memory for MAC address buffer\n");
 		return;
 	}
+
+	sg_init_table(sg, 2);
 
 	/* Store the unicast list and count in the front of the buffer */
 	mac_data->entries = dev->uc_count;
···
 	kfree(buf);
 }
 
-static void virnet_vlan_rx_add_vid(struct net_device *dev, u16 vid)
+static void virtnet_vlan_rx_add_vid(struct net_device *dev, u16 vid)
 {
 	struct virtnet_info *vi = netdev_priv(dev);
 	struct scatterlist sg;
 
-	sg_set_buf(&sg, &vid, sizeof(vid));
+	sg_init_one(&sg, &vid, sizeof(vid));
 
 	if (!virtnet_send_command(vi, VIRTIO_NET_CTRL_VLAN,
 				  VIRTIO_NET_CTRL_VLAN_ADD, &sg, 1, 0))
 		dev_warn(&dev->dev, "Failed to add VLAN ID %d.\n", vid);
 }
 
-static void virnet_vlan_rx_kill_vid(struct net_device *dev, u16 vid)
+static void virtnet_vlan_rx_kill_vid(struct net_device *dev, u16 vid)
 {
 	struct virtnet_info *vi = netdev_priv(dev);
 	struct scatterlist sg;
 
-	sg_set_buf(&sg, &vid, sizeof(vid));
+	sg_init_one(&sg, &vid, sizeof(vid));
 
 	if (!virtnet_send_command(vi, VIRTIO_NET_CTRL_VLAN,
 				  VIRTIO_NET_CTRL_VLAN_DEL, &sg, 1, 0))
···
 	.ndo_set_mac_address = virtnet_set_mac_address,
 	.ndo_set_rx_mode     = virtnet_set_rx_mode,
 	.ndo_change_mtu	     = virtnet_change_mtu,
-	.ndo_vlan_rx_add_vid = virnet_vlan_rx_add_vid,
-	.ndo_vlan_rx_kill_vid = virnet_vlan_rx_kill_vid,
+	.ndo_vlan_rx_add_vid = virtnet_vlan_rx_add_vid,
+	.ndo_vlan_rx_kill_vid = virtnet_vlan_rx_kill_vid,
 #ifdef CONFIG_NET_POLL_CONTROLLER
 	.ndo_poll_controller = virtnet_netpoll,
 #endif

drivers/net/wireless/ath5k/debug.c

···
 
 	for (b = 0; b < IEEE80211_NUM_BANDS; b++) {
 		struct ieee80211_supported_band *band = &sc->sbands[b];
-		char bname[5];
+		char bname[6];
 		switch (band->band) {
 		case IEEE80211_BAND_2GHZ:
 			strcpy(bname, "2 GHz");

drivers/net/wireless/iwlwifi/iwl-scan.c

···
 
 	IWL_DEBUG_SCAN(priv, "SCAN complete scan\n");
 
+	ieee80211_scan_completed(priv->hw, false);
+
 	if (test_bit(STATUS_EXIT_PENDING, &priv->status))
 		return;
-
-	ieee80211_scan_completed(priv->hw, false);
 
 	/* Since setting the TXPOWER may have been deferred while
 	 * performing the scan, fire one off */

drivers/net/wireless/iwlwifi/iwl3945-base.c

···
 	rxq->free_count = 0;
 	spin_unlock_irqrestore(&rxq->lock, flags);
 }
-EXPORT_SYMBOL(iwl3945_rx_queue_reset);
 
 /*
  * this should be called while priv->lock is locked

drivers/net/wireless/rndis_wlan.c

···
 	mutex_init(&priv->command_lock);
 	spin_lock_init(&priv->stats_lock);
 
+	/* because rndis_command() sleeps we need to use workqueue */
+	priv->workqueue = create_singlethread_workqueue("rndis_wlan");
+	INIT_WORK(&priv->work, rndis_wext_worker);
+	INIT_DELAYED_WORK(&priv->stats_work, rndis_update_wireless_stats);
+
 	/* try bind rndis_host */
 	retval = generic_rndis_bind(usbdev, intf, FLAG_RNDIS_PHYM_WIRELESS);
 	if (retval < 0)
···
 	disassociate(usbdev, 1);
 	netif_carrier_off(usbdev->net);
 
-	/* because rndis_command() sleeps we need to use workqueue */
-	priv->workqueue = create_singlethread_workqueue("rndis_wlan");
-	INIT_DELAYED_WORK(&priv->stats_work, rndis_update_wireless_stats);
 	queue_delayed_work(priv->workqueue, &priv->stats_work,
 		round_jiffies_relative(STATS_UPDATE_JIFFIES));
-	INIT_WORK(&priv->work, rndis_wext_worker);
 
 	return 0;
 
 fail:
+	cancel_delayed_work_sync(&priv->stats_work);
+	cancel_work_sync(&priv->work);
+	flush_workqueue(priv->workqueue);
+	destroy_workqueue(priv->workqueue);
+
 	kfree(priv);
 	return retval;
 }

include/linux/netfilter/x_tables.h

···
 
 	local_bh_disable();
 	lock = &__get_cpu_var(xt_info_locks);
-	if (!lock->readers++)
+	if (likely(!lock->readers++))
 		spin_lock(&lock->lock);
 }
 
···
 {
 	struct xt_info_lock *lock = &__get_cpu_var(xt_info_locks);
 
-	if (!--lock->readers)
+	if (likely(!--lock->readers))
 		spin_unlock(&lock->lock);
 	local_bh_enable();
 }

include/linux/usb/cdc.h

···
 #define USB_CDC_SUBCLASS_DMM			0x09
 #define USB_CDC_SUBCLASS_MDLM			0x0a
 #define USB_CDC_SUBCLASS_OBEX			0x0b
+#define USB_CDC_SUBCLASS_EEM			0x0c
 
 #define USB_CDC_PROTO_NONE			0
 
···
 #define USB_CDC_ACM_PROTO_AT_3G			5
 #define USB_CDC_ACM_PROTO_AT_CDMA		6
 #define USB_CDC_ACM_PROTO_VENDOR		0xff
+
+#define USB_CDC_PROTO_EEM			7
 
 /*-------------------------------------------------------------------------*/
 

include/linux/virtio_net.h

···
  * compatible drivers/servers. */
 #include <linux/types.h>
 #include <linux/virtio_config.h>
+#include <linux/if_ether.h>
 
 /* The ID for virtio_net */
 #define VIRTIO_ID_NET	1

include/net/bluetooth/hci_core.h

···
 
 int hci_register_sysfs(struct hci_dev *hdev);
 void hci_unregister_sysfs(struct hci_dev *hdev);
+void hci_conn_init_sysfs(struct hci_conn *conn);
 void hci_conn_add_sysfs(struct hci_conn *conn);
 void hci_conn_del_sysfs(struct hci_conn *conn);
 

include/net/tcp.h

···
 #include <net/ip.h>
 #include <net/tcp_states.h>
 #include <net/inet_ecn.h>
+#include <net/dst.h>
 
 #include <linux/seq_file.h>
 
···
 		tcp_fast_path_on(tp);
 }
 
+/* Compute the actual rto_min value */
+static inline u32 tcp_rto_min(struct sock *sk)
+{
+	struct dst_entry *dst = __sk_dst_get(sk);
+	u32 rto_min = TCP_RTO_MIN;
+
+	if (dst && dst_metric_locked(dst, RTAX_RTO_MIN))
+		rto_min = dst_metric_rtt(dst, RTAX_RTO_MIN);
+	return rto_min;
+}
+
 /* Compute the actual receive window we are currently advertising.
  * Rcv_nxt can be after the window if our peer push more data
  * than the offered window.
···
 			wake_up_interruptible(sk->sk_sleep);
 			if (!inet_csk_ack_scheduled(sk))
 				inet_csk_reset_xmit_timer(sk, ICSK_TIME_DACK,
-						          (3 * TCP_RTO_MIN) / 4,
+						          (3 * tcp_rto_min(sk)) / 4,
 							  TCP_RTO_MAX);
 		}
 		return 1;

net/atm/br2684.c

···
 	struct br2684_dev *brdev = BRPRIV(netdev);
 
 	ether_setup(netdev);
+	brdev->net_dev = netdev;
 
 	netdev->netdev_ops = &br2684_netdev_ops;
 

net/bluetooth/hci_conn.c

···
 	if (hdev->notify)
 		hdev->notify(hdev, HCI_NOTIFY_CONN_ADD);
 
+	hci_conn_init_sysfs(conn);
+
 	tasklet_enable(&hdev->tx_task);
 
 	return conn;

net/bluetooth/hci_sysfs.c

···
 struct class *bt_class = NULL;
 EXPORT_SYMBOL_GPL(bt_class);
 
-static struct workqueue_struct *bluetooth;
+static struct workqueue_struct *bt_workq;
 
 static inline char *link_typetostr(int type)
 {
···
 {
 	struct hci_conn *conn = container_of(work, struct hci_conn, work_add);
 
-	/* ensure previous add/del is complete */
-	flush_workqueue(bluetooth);
+	/* ensure previous del is complete */
+	flush_work(&conn->work_del);
 
 	if (device_add(&conn->dev) < 0) {
 		BT_ERR("Failed to register connection device");
 		return;
 	}
-}
-
-void hci_conn_add_sysfs(struct hci_conn *conn)
-{
-	struct hci_dev *hdev = conn->hdev;
-
-	BT_DBG("conn %p", conn);
-
-	conn->dev.type = &bt_link;
-	conn->dev.class = bt_class;
-	conn->dev.parent = &hdev->dev;
-
-	dev_set_name(&conn->dev, "%s:%d", hdev->name, conn->handle);
-
-	dev_set_drvdata(&conn->dev, conn);
-
-	device_initialize(&conn->dev);
-
-	INIT_WORK(&conn->work_add, add_conn);
-
-	queue_work(bluetooth, &conn->work_add);
 }
 
 /*
···
 	struct hci_conn *conn = container_of(work, struct hci_conn, work_del);
 	struct hci_dev *hdev = conn->hdev;
 
-	/* ensure previous add/del is complete */
-	flush_workqueue(bluetooth);
+	/* ensure previous add is complete */
+	flush_work(&conn->work_add);
+
+	if (!device_is_registered(&conn->dev))
+		return;
 
 	while (1) {
 		struct device *dev;
···
 	hci_dev_put(hdev);
 }
 
+void hci_conn_init_sysfs(struct hci_conn *conn)
+{
+	struct hci_dev *hdev = conn->hdev;
+
+	BT_DBG("conn %p", conn);
+
+	conn->dev.type = &bt_link;
+	conn->dev.class = bt_class;
+	conn->dev.parent = &hdev->dev;
+
+	dev_set_drvdata(&conn->dev, conn);
+
+	device_initialize(&conn->dev);
+
+	INIT_WORK(&conn->work_add, add_conn);
+	INIT_WORK(&conn->work_del, del_conn);
+}
+
+void hci_conn_add_sysfs(struct hci_conn *conn)
+{
+	struct hci_dev *hdev = conn->hdev;
+
+	BT_DBG("conn %p", conn);
+
+	dev_set_name(&conn->dev, "%s:%d", hdev->name, conn->handle);
+
+	queue_work(bt_workq, &conn->work_add);
+}
+
 void hci_conn_del_sysfs(struct hci_conn *conn)
 {
 	BT_DBG("conn %p", conn);
 
-	if (!device_is_registered(&conn->dev))
-		return;
-
-	INIT_WORK(&conn->work_del, del_conn);
-
-	queue_work(bluetooth, &conn->work_del);
+	queue_work(bt_workq, &conn->work_del);
 }
 
 static inline char *host_typetostr(int type)
···
 
 int __init bt_sysfs_init(void)
 {
-	bluetooth = create_singlethread_workqueue("bluetooth");
-	if (!bluetooth)
+	bt_workq = create_singlethread_workqueue("bluetooth");
+	if (!bt_workq)
 		return -ENOMEM;
 
 	bt_class = class_create(THIS_MODULE, "bluetooth");
 	if (IS_ERR(bt_class)) {
-		destroy_workqueue(bluetooth);
+		destroy_workqueue(bt_workq);
 		return PTR_ERR(bt_class);
 	}
 
···
 
 void bt_sysfs_cleanup(void)
 {
-	destroy_workqueue(bluetooth);
+	destroy_workqueue(bt_workq);
 
 	class_destroy(bt_class);
 }

net/core/dev.c

···
 {
 	u32 hash;
 
-	if (skb_rx_queue_recorded(skb)) {
-		hash = skb_get_rx_queue(skb);
-	} else if (skb->sk && skb->sk->sk_hash) {
+	if (skb_rx_queue_recorded(skb))
+		return skb_get_rx_queue(skb) % dev->real_num_tx_queues;
+
+	if (skb->sk && skb->sk->sk_hash)
 		hash = skb->sk->sk_hash;
-	} else
+	else
 		hash = skb->protocol;
 
 	hash = jhash_1word(hash, skb_tx_hashrnd);

net/core/skbuff.c

···
 
 static inline struct page *linear_to_page(struct page *page, unsigned int *len,
 					  unsigned int *offset,
-					  struct sk_buff *skb)
+					  struct sk_buff *skb, struct sock *sk)
 {
-	struct sock *sk = skb->sk;
 	struct page *p = sk->sk_sndmsg_page;
 	unsigned int off;
 
···
  */
 static inline int spd_fill_page(struct splice_pipe_desc *spd, struct page *page,
 				unsigned int *len, unsigned int offset,
-				struct sk_buff *skb, int linear)
+				struct sk_buff *skb, int linear,
+				struct sock *sk)
 {
 	if (unlikely(spd->nr_pages == PIPE_BUFFERS))
 		return 1;
 
 	if (linear) {
-		page = linear_to_page(page, len, &offset, skb);
+		page = linear_to_page(page, len, &offset, skb, sk);
 		if (!page)
 			return 1;
 	} else
···
 static inline int __splice_segment(struct page *page, unsigned int poff,
 				   unsigned int plen, unsigned int *off,
 				   unsigned int *len, struct sk_buff *skb,
-				   struct splice_pipe_desc *spd, int linear)
+				   struct splice_pipe_desc *spd, int linear,
+				   struct sock *sk)
 {
 	if (!*len)
 		return 1;
···
 		/* the linear region may spread across several pages  */
 		flen = min_t(unsigned int, flen, PAGE_SIZE - poff);
 
-		if (spd_fill_page(spd, page, &flen, poff, skb, linear))
+		if (spd_fill_page(spd, page, &flen, poff, skb, linear, sk))
 			return 1;
 
 		__segment_seek(&page, &poff, &plen, flen);
···
  * pipe is full or if we already spliced the requested length.
  */
 static int __skb_splice_bits(struct sk_buff *skb, unsigned int *offset,
-		      unsigned int *len,
-		      struct splice_pipe_desc *spd)
+			     unsigned int *len, struct splice_pipe_desc *spd,
+			     struct sock *sk)
 {
 	int seg;
 
···
 	if (__splice_segment(virt_to_page(skb->data),
 			     (unsigned long) skb->data & (PAGE_SIZE - 1),
 			     skb_headlen(skb),
-			     offset, len, skb, spd, 1))
+			     offset, len, skb, spd, 1, sk))
 		return 1;
 
 	/*
···
 		const skb_frag_t *f = &skb_shinfo(skb)->frags[seg];
 
 		if (__splice_segment(f->page, f->page_offset, f->size,
-				     offset, len, skb, spd, 0))
+				     offset, len, skb, spd, 0, sk))
 			return 1;
 	}
 
···
 		.ops = &sock_pipe_buf_ops,
 		.spd_release = sock_spd_release,
 	};
+	struct sock *sk = skb->sk;
 
 	/*
 	 * __skb_splice_bits() only fails if the output has no room left,
 	 * so no point in going over the frag_list for the error case.
 	 */
-	if (__skb_splice_bits(skb, &offset, &tlen, &spd))
+	if (__skb_splice_bits(skb, &offset, &tlen, &spd, sk))
 		goto done;
 	else if (!tlen)
 		goto done;
···
 		struct sk_buff *list = skb_shinfo(skb)->frag_list;
 
 		for (; list && tlen; list = list->next) {
-			if (__skb_splice_bits(list, &offset, &tlen, &spd))
+			if (__skb_splice_bits(list, &offset, &tlen, &spd, sk))
 				break;
 		}
 	}
 
 done:
 	if (spd.nr_pages) {
-		struct sock *sk = skb->sk;
 		int ret;
 
 		/*

net/ipv4/tcp_input.c

···
 		tcp_grow_window(sk, skb);
 }
 
-static u32 tcp_rto_min(struct sock *sk)
-{
-	struct dst_entry *dst = __sk_dst_get(sk);
-	u32 rto_min = TCP_RTO_MIN;
-
-	if (dst && dst_metric_locked(dst, RTAX_RTO_MIN))
-		rto_min = dst_metric_rtt(dst, RTAX_RTO_MIN);
-	return rto_min;
-}
-
 /* Called to compute a smoothed rtt estimate. The data fed to this
  * routine either comes from timestamps, or from segments that were
  * known _not_ to have been retransmitted [see Karn/Partridge

net/mac80211/main.c

···
 	local->hw.conf.long_frame_max_tx_count = 4;
 	local->hw.conf.short_frame_max_tx_count = 7;
 	local->hw.conf.radio_enabled = true;
+	local->user_power_level = -1;
 
 	INIT_LIST_HEAD(&local->interfaces);
 	mutex_init(&local->iflist_mtx);
···
 	if (result < 0)
 		goto fail_sta_info;
 
+	result = ieee80211_wep_init(local);
+	if (result < 0) {
+		printk(KERN_DEBUG "%s: Failed to initialize wep: %d\n",
+		       wiphy_name(local->hw.wiphy), result);
+		goto fail_wep;
+	}
+
 	rtnl_lock();
 	result = dev_alloc_name(local->mdev, local->mdev->name);
 	if (result < 0)
···
 		printk(KERN_DEBUG "%s: Failed to initialize rate control "
 		       "algorithm\n", wiphy_name(local->hw.wiphy));
 		goto fail_rate;
-	}
-
-	result = ieee80211_wep_init(local);
-
-	if (result < 0) {
-		printk(KERN_DEBUG "%s: Failed to initialize wep: %d\n",
-		       wiphy_name(local->hw.wiphy), result);
-		goto fail_wep;
 	}
 
 	/* add one default STA interface if supported */
···
 
 	return 0;
 
-fail_wep:
-	rate_control_deinitialize(local);
 fail_rate:
 	unregister_netdevice(local->mdev);
 	local->mdev = NULL;
 fail_dev:
 	rtnl_unlock();
+	ieee80211_wep_free(local);
+fail_wep:
 	sta_info_stop(local);
 fail_sta_info:
 	debugfs_hw_del(local);

net/netfilter/Kconfig

···
 	depends on NETFILTER_TPROXY
 	depends on NETFILTER_XTABLES
 	depends on NETFILTER_ADVANCED
+	depends on !NF_CONNTRACK || NF_CONNTRACK
 	select NF_DEFRAG_IPV4
 	help
 	  This option adds a `socket' match, which can be used to match

net/sched/cls_api.c

···
 		}
 		tp->ops = tp_ops;
 		tp->protocol = protocol;
-		tp->prio = nprio ? : tcf_auto_prio(*back);
+		tp->prio = nprio ? : TC_H_MAJ(tcf_auto_prio(*back));
 		tp->q = q;
 		tp->classify = tp_ops->classify;
 		tp->classid = parent;