Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial

Pull trivial tree updates from Jiri Kosina.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial:
floppy: make local variable non-static
exynos: fixes an incorrect header guard
dt-bindings: fixes some incorrect header guards
cpufreq-dt: correct dead link in documentation
cpufreq: ARM big LITTLE: correct dead link in documentation
treewide: Fix typos in printk
Documentation: filesystem: Fix typo in fs/eventfd.c
fs/super.c: use && instead of & for warn_on condition
Documentation: fix sysfs-ptp
lib: scatterlist: fix Kconfig description

Documentation/ABI/testing/sysfs-ptp

···
 		assignment may be changed by two writing numbers into
 		the file.
 
-What:		/sys/class/ptp/ptpN/pps_avaiable
+What:		/sys/class/ptp/ptpN/pps_available
 Date:		September 2010
 Contact:	Richard Cochran <[e-mail]>
 Description:

Documentation/devicetree/bindings/cpufreq/arm_big_little_dt.txt

···
 cpu:x.
 
 Required properties:
-- operating-points: Refer to Documentation/devicetree/bindings/power/opp.txt
+- operating-points: Refer to Documentation/devicetree/bindings/opp/opp.txt
   for details
 
 Optional properties:

Documentation/devicetree/bindings/cpufreq/cpufreq-dt.txt

···
 - None
 
 Optional properties:
-- operating-points: Refer to Documentation/devicetree/bindings/power/opp.txt for
+- operating-points: Refer to Documentation/devicetree/bindings/opp/opp.txt for
   details. OPPs *must* be supplied either via DT, i.e. this property, or
   populated at runtime.
 - clock-latency: Specify the possible maximum transition latency for clock,

Documentation/sysctl/vm.txt

···
 and reclaimable pages, the number of pages at which the background kernel
 flusher threads will start writing out dirty data.
 
-The total avaiable memory is not equal to total system memory.
+The total available memory is not equal to total system memory.
 
 ==============================================================
 
···
 and reclaimable pages, the number of pages at which a process which is
 generating disk writes will itself start writing out dirty data.
 
-The total avaiable memory is not equal to total system memory.
+The total available memory is not equal to total system memory.
 
 ==============================================================
 

drivers/block/floppy.c

···
 		unsigned int type = UDP->cmos;
 		struct floppy_drive_params *params;
 		const char *name = NULL;
-		static char temparea[32];
+		char temparea[32];
 
 		if (type < ARRAY_SIZE(default_drive_params)) {
 			params = &default_drive_params[type].params;
···
 				allowed_drive_mask &= ~(1 << drive);
 		} else {
 			params = &default_drive_params[0].params;
-			sprintf(temparea, "unknown type %d (usb?)", type);
+			snprintf(temparea, sizeof(temparea),
+				 "unknown type %d (usb?)", type);
 			name = temparea;
 		}
 		if (name) {

drivers/firmware/efi/libstub/fdt.c

···
 			sys_table->boottime->free_pool(memory_map);
 			new_fdt_size += EFI_PAGE_SIZE;
 		} else {
-			pr_efi_err(sys_table, "Unable to constuct new device tree.\n");
+			pr_efi_err(sys_table, "Unable to construct new device tree.\n");
 			goto fail_free_mmap;
 		}
 	}

drivers/gpu/drm/exynos/exynos_drm_fb.h

···
  */
 
 #ifndef _EXYNOS_DRM_FB_H_
-#define _EXYNOS_DRM_FB_H
+#define _EXYNOS_DRM_FB_H_
 
 #include "exynos_drm_gem.h"
 

drivers/infiniband/hw/cxgb4/cm.c

···
 {
 	struct c4iw_ep *ep = handle;
 
-	printk(KERN_ERR MOD "ARP failure duing connect\n");
+	printk(KERN_ERR MOD "ARP failure during connect\n");
 	kfree_skb(skb);
 	connect_reply_upcall(ep, -EHOSTUNREACH);
 	state_set(&ep->com, DEAD);

drivers/md/raid0.c

···
 	 *  - all mirrors must be already degraded
 	 */
 	if (mddev->layout != ((1 << 8) + 2)) {
-		printk(KERN_ERR "md/raid0:%s:: Raid0 cannot takover layout: 0x%x\n",
+		printk(KERN_ERR "md/raid0:%s:: Raid0 cannot takeover layout: 0x%x\n",
 		       mdname(mddev),
 		       mddev->layout);
 		return ERR_PTR(-EINVAL);
 	}
 	if (mddev->raid_disks & 1) {
-		printk(KERN_ERR "md/raid0:%s: Raid0 cannot takover Raid10 with odd disk number.\n",
+		printk(KERN_ERR "md/raid0:%s: Raid0 cannot takeover Raid10 with odd disk number.\n",
 		       mdname(mddev));
 		return ERR_PTR(-EINVAL);
 	}

drivers/media/common/saa7146/saa7146_video.c

···
 	/* check if overlay is running */
 	if (IS_OVERLAY_ACTIVE(fh) != 0) {
 		if (vv->video_fh != fh) {
-			DEB_D("refusing to change framebuffer informations while overlay is active in another open\n");
+			DEB_D("refusing to change framebuffer information while overlay is active in another open\n");
 			return -EBUSY;
 		}
 	}

drivers/media/dvb-frontends/m88ds3103.c

···
 	/* request the firmware, this will block and timeout */
 	ret = request_firmware(&fw, fw_file, &client->dev);
 	if (ret) {
-		dev_err(&client->dev, "firmare file '%s' not found\n", fw_file);
+		dev_err(&client->dev, "firmware file '%s' not found\n", fw_file);
 		goto err;
 	}
 

drivers/media/dvb-frontends/si2165.c

···
 					   &offset, block_count);
 	if (ret < 0) {
 		dev_err(&state->i2c->dev,
-			"%s: firmare could not be uploaded\n",
+			"%s: firmware could not be uploaded\n",
 			KBUILD_MODNAME);
 		goto error;
 	}
···
 
 	if (len != offset) {
 		dev_err(&state->i2c->dev,
-			"%s: firmare len mismatch %04x != %04x\n",
+			"%s: firmware len mismatch %04x != %04x\n",
 			KBUILD_MODNAME, len, offset);
 		ret = -EINVAL;
 		goto error;

drivers/media/pci/netup_unidvb/netup_unidvb_core.c

···
 		vb2_dvb_alloc_frontend(
 			&ndev->frontends[num], 3) == NULL) {
 		dev_dbg(&ndev->pci_dev->dev,
-			"%s(): unable to to alllocate vb2_dvb_frontend\n",
+			"%s(): unable to allocate vb2_dvb_frontend\n",
 			__func__);
 		return -ENOMEM;
 	}

drivers/net/ethernet/intel/i40evf/i40evf_main.c

···
 
 	if (adapter->current_op != I40E_VIRTCHNL_OP_UNKNOWN) {
 		/* bail because we already have a command pending */
-		dev_err(&adapter->pdev->dev, "Cannot confiure RSS, command %d pending\n",
+		dev_err(&adapter->pdev->dev, "Cannot configure RSS, command %d pending\n",
 			adapter->current_op);
 		return -EBUSY;
 	}

drivers/soc/ti/knav_dma.c

···
 	*dma_instance = dma_node->name;
 	index = of_property_match_string(np, "ti,navigator-dma-names", name);
 	if (index < 0) {
-		dev_err(kdev->dev, "No 'ti,navigator-dma-names' propery\n");
+		dev_err(kdev->dev, "No 'ti,navigator-dma-names' property\n");
 		return -ENODEV;
 	}
 

fs/eventfd.c

···
  *
  * This function is supposed to be called by the kernel in paths that do not
  * allow sleeping. In this function we allow the counter to reach the ULLONG_MAX
- * value, and we signal this as overflow condition by returining a POLLERR
+ * value, and we signal this as overflow condition by returning a POLLERR
  * to poll(2).
  *
- * Returns the amount by which the counter was incrememnted.  This will be less
+ * Returns the amount by which the counter was incremented.  This will be less
  * than @n if the counter has overflowed.
  */
 __u64 eventfd_signal(struct eventfd_ctx *ctx, __u64 n)

fs/super.c

···
 	else
 		ret = percpu_down_read_trylock(sb->s_writers.rw_sem + level-1);
 
-	WARN_ON(force_trylock & !ret);
+	WARN_ON(force_trylock && !ret);
 	return ret;
 }
 EXPORT_SYMBOL(__sb_start_write);

include/dt-bindings/leds/common.h

···
  * Author: Jacek Anaszewski <[e-mail]>
  */
 
-#ifndef __DT_BINDINGS_LEDS_H__
+#ifndef __DT_BINDINGS_LEDS_H
 #define __DT_BINDINGS_LEDS_H
 
 /* External trigger type */

include/dt-bindings/mfd/palmas.h

···
  *
  */
 
-#ifndef __DT_BINDINGS_PALMAS_H__
+#ifndef __DT_BINDINGS_PALMAS_H
 #define __DT_BINDINGS_PALMAS_H
 
 /* External control pins */

lib/Kconfig

···
 config SG_SPLIT
 	def_bool n
 	help
-	 Provides a heler to split scatterlists into chunks, each chunk being a
-	 scatterlist. This should be selected by a driver or an API which
-	 whishes to split a scatterlist amongst multiple DMA channel.
+	 Provides a helper to split scatterlists into chunks, each chunk being
+	 a scatterlist. This should be selected by a driver or an API which
+	 whishes to split a scatterlist amongst multiple DMA channels.
 
 #
 # sg chaining option

sound/drivers/pcm-indirect2.c

···
 	int seconds = (rec->lastbytetime - rec->firstbytetime) / HZ;
 
 	snd_printk(KERN_DEBUG "STAT: mul_elapsed: %u, mul_elapsed_real: %d, "
-		   "irq_occured: %d\n",
+		   "irq_occurred: %d\n",
 		   rec->mul_elapsed, rec->mul_elapsed_real, rec->irq_occured);
 	snd_printk(KERN_DEBUG "STAT: min_multiple: %d (irqs/period)\n",
 		   rec->min_multiple);

sound/usb/6fire/firmware.c

···
 		if (!memcmp(version, known_fw_versions + i, 2))
 			return 0;
 
-	dev_err(&intf->dev, "invalid fimware version in device: %4ph. "
+	dev_err(&intf->dev, "invalid firmware version in device: %4ph. "
 			"please reconnect to power. if this failure "
 			"still happens, check your firmware installation.",
 			version);