iio:ad5791: Do not store transfer buffers on the stack

Some SPI controllers may not be able to handle transfer buffers that are placed
on the stack.

Signed-off-by: Lars-Peter Clausen <[e-mail]>
Signed-off-by: Jonathan Cameron <[e-mail]>

drivers/iio/dac/ad5791.c

···
 	unsigned			ctrl;
 	unsigned			pwr_down_mode;
 	bool				pwr_down;
+
+	union {
+		__be32 d32;
+		u8 d8[4];
+	} data[3] ____cacheline_aligned;
 };
 
 /**
···
 	ID_AD5791,
 };
 
-static int ad5791_spi_write(struct spi_device *spi, u8 addr, u32 val)
+static int ad5791_spi_write(struct ad5791_state *st, u8 addr, u32 val)
 {
-	union {
-		__be32 d32;
-		u8 d8[4];
-	} data;
-
-	data.d32 = cpu_to_be32(AD5791_CMD_WRITE |
+	st->data[0].d32 = cpu_to_be32(AD5791_CMD_WRITE |
 			      AD5791_ADDR(addr) |
 			      (val & AD5791_DAC_MASK));
 
-	return spi_write(spi, &data.d8[1], 3);
+	return spi_write(st->spi, &st->data[0].d8[1], 3);
 }
 
-static int ad5791_spi_read(struct spi_device *spi, u8 addr, u32 *val)
+static int ad5791_spi_read(struct ad5791_state *st, u8 addr, u32 *val)
 {
-	union {
-		__be32 d32;
-		u8 d8[4];
-	} data[3];
 	int ret;
 	struct spi_transfer xfers[] = {
 		{
-			.tx_buf = &data[0].d8[1],
+			.tx_buf = &st->data[0].d8[1],
 			.bits_per_word = 8,
 			.len = 3,
 			.cs_change = 1,
 		}, {
-			.tx_buf = &data[1].d8[1],
-			.rx_buf = &data[2].d8[1],
+			.tx_buf = &st->data[1].d8[1],
+			.rx_buf = &st->data[2].d8[1],
 			.bits_per_word = 8,
 			.len = 3,
 		},
 	};
 
-	data[0].d32 = cpu_to_be32(AD5791_CMD_READ |
+	st->data[0].d32 = cpu_to_be32(AD5791_CMD_READ |
 			      AD5791_ADDR(addr));
-	data[1].d32 = cpu_to_be32(AD5791_ADDR(AD5791_ADDR_NOOP));
+	st->data[1].d32 = cpu_to_be32(AD5791_ADDR(AD5791_ADDR_NOOP));
 
-	ret = spi_sync_transfer(spi, xfers, ARRAY_SIZE(xfers));
+	ret = spi_sync_transfer(st->spi, xfers, ARRAY_SIZE(xfers));
 
-	*val = be32_to_cpu(data[2].d32);
+	*val = be32_to_cpu(st->data[2].d32);
 
 	return ret;
 }
···
 	}
 	st->pwr_down = pwr_down;
 
-	ret = ad5791_spi_write(st->spi, AD5791_ADDR_CTRL, st->ctrl);
+	ret = ad5791_spi_write(st, AD5791_ADDR_CTRL, st->ctrl);
 
 	return ret ? ret : len;
 }
···
 
 	switch (m) {
 	case IIO_CHAN_INFO_RAW:
-		ret = ad5791_spi_read(st->spi, chan->address, val);
+		ret = ad5791_spi_read(st, chan->address, val);
 		if (ret)
 			return ret;
 		*val &= AD5791_DAC_MASK;
···
 		val &= AD5791_RES_MASK(chan->scan_type.realbits);
 		val <<= chan->scan_type.shift;
 
-		return ad5791_spi_write(st->spi, chan->address, val);
+		return ad5791_spi_write(st, chan->address, val);
 
 	default:
 		return -EINVAL;
···
 		dev_warn(&spi->dev, "reference voltage unspecified\n");
 	}
 
-	ret = ad5791_spi_write(spi, AD5791_ADDR_SW_CTRL, AD5791_SWCTRL_RESET);
+	ret = ad5791_spi_write(st, AD5791_ADDR_SW_CTRL, AD5791_SWCTRL_RESET);
 	if (ret)
 		goto error_disable_reg_neg;
 
···
 		  | ((pdata && pdata->use_rbuf_gain2) ? 0 : AD5791_CTRL_RBUF) |
 		  AD5791_CTRL_BIN2SC;
 
-	ret = ad5791_spi_write(spi, AD5791_ADDR_CTRL, st->ctrl |
+	ret = ad5791_spi_write(st, AD5791_ADDR_CTRL, st->ctrl |
 		AD5791_CTRL_OPGND | AD5791_CTRL_DACTRI);
 	if (ret)
 		goto error_disable_reg_neg;