ALSA: ALSA driver for SGI HAL2 audio device

This patch adds a new ALSA driver for the audio device found inside
many older SGI workstation (Indy, Indigo2). The hardware uses a SGI
custom chip, which feeds two codec chips, an IEC chip and a synth chip.
Currently only one of the codecs is supported. This driver already has
the same functionality as the HAL2 OSS driver and will replace it.

Signed-off-by: Thomas Bogendoerfer <[e-mail]>
Signed-off-by: Takashi Iwai <[e-mail]>
Signed-off-by: Jaroslav Kysela <[e-mail]>

sound/mips/Kconfig

···
 
 if SND_MIPS
 
+config SND_SGI_HAL2
+        tristate "SGI HAL2 Audio"
+        depends on SGI_HAS_HAL2
+        help
+                Sound support for the SGI Indy and Indigo2 Workstation.
+
+
 config SND_AU1X00
 	tristate "Au1x00 AC97 Port Driver"
 	depends on SOC_AU1000 || SOC_AU1100 || SOC_AU1500

sound/mips/Makefile

···
 #
 
 snd-au1x00-objs := au1x00.o
+snd-sgi-hal2-objs := hal2.o
 
 # Toplevel Module Dependency
 obj-$(CONFIG_SND_AU1X00) += snd-au1x00.o
+obj-$(CONFIG_SND_SGI_HAL2) += snd-sgi-hal2.o

sound/mips/hal2.c

···
+/*
+ *  Driver for A2 audio system used in SGI machines
+ *  Copyright (c) 2008 Thomas Bogendoerfer <[e-mail]>
+ *
+ *  Based on OSS code from Ladislav Michl <[e-mail]>, which
+ *  was based on code from Ulf Carlsson
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <asm/sgi/hpc3.h>
+#include <asm/sgi/ip22.h>
+
+#include <sound/core.h>
+#include <sound/control.h>
+#include <sound/pcm.h>
+#include <sound/pcm-indirect.h>
+#include <sound/initval.h>
+
+#include "hal2.h"
+
+static int index = SNDRV_DEFAULT_IDX1;  /* Index 0-MAX */
+static char *id = SNDRV_DEFAULT_STR1;   /* ID for this card */
+
+module_param(index, int, 0444);
+MODULE_PARM_DESC(index, "Index value for SGI HAL2 soundcard.");
+module_param(id, charp, 0444);
+MODULE_PARM_DESC(id, "ID string for SGI HAL2 soundcard.");
+MODULE_DESCRIPTION("ALSA driver for SGI HAL2 audio");
+MODULE_AUTHOR("Thomas Bogendoerfer");
+MODULE_LICENSE("GPL");
+
+
+#define H2_BLOCK_SIZE	1024
+#define H2_BUF_SIZE	16384
+
+struct hal2_pbus {
+	struct hpc3_pbus_dmacregs *pbus;
+	int pbusnr;
+	unsigned int ctrl;		/* Current state of pbus->pbdma_ctrl */
+};
+
+struct hal2_desc {
+	struct hpc_dma_desc desc;
+	u32 pad;			/* padding */
+};
+
+struct hal2_codec {
+	struct snd_pcm_indirect pcm_indirect;
+	struct snd_pcm_substream *substream;
+
+	unsigned char *buffer;
+	dma_addr_t buffer_dma;
+	struct hal2_desc *desc;
+	dma_addr_t desc_dma;
+	int desc_count;
+	struct hal2_pbus pbus;
+	int voices;			/* mono/stereo */
+	unsigned int sample_rate;
+	unsigned int master;		/* Master frequency */
+	unsigned short mod;		/* MOD value */
+	unsigned short inc;		/* INC value */
+};
+
+#define H2_MIX_OUTPUT_ATT	0
+#define H2_MIX_INPUT_GAIN	1
+
+struct snd_hal2 {
+	struct snd_card *card;
+
+	struct hal2_ctl_regs *ctl_regs;	/* HAL2 ctl registers */
+	struct hal2_aes_regs *aes_regs;	/* HAL2 aes registers */
+	struct hal2_vol_regs *vol_regs;	/* HAL2 vol registers */
+	struct hal2_syn_regs *syn_regs;	/* HAL2 syn registers */
+
+	struct hal2_codec dac;
+	struct hal2_codec adc;
+};
+
+#define H2_INDIRECT_WAIT(regs)	while (hal2_read(&regs->isr) & H2_ISR_TSTATUS);
+
+#define H2_READ_ADDR(addr)	(addr | (1<<7))
+#define H2_WRITE_ADDR(addr)	(addr)
+
+static inline u32 hal2_read(u32 *reg)
+{
+	return __raw_readl(reg);
+}
+
+static inline void hal2_write(u32 val, u32 *reg)
+{
+	__raw_writel(val, reg);
+}
+
+
+static u32 hal2_i_read32(struct snd_hal2 *hal2, u16 addr)
+{
+	u32 ret;
+	struct hal2_ctl_regs *regs = hal2->ctl_regs;
+
+	hal2_write(H2_READ_ADDR(addr), &regs->iar);
+	H2_INDIRECT_WAIT(regs);
+	ret = hal2_read(&regs->idr0) & 0xffff;
+	hal2_write(H2_READ_ADDR(addr) | 0x1, &regs->iar);
+	H2_INDIRECT_WAIT(regs);
+	ret |= (hal2_read(&regs->idr0) & 0xffff) << 16;
+	return ret;
+}
+
+static void hal2_i_write16(struct snd_hal2 *hal2, u16 addr, u16 val)
+{
+	struct hal2_ctl_regs *regs = hal2->ctl_regs;
+
+	hal2_write(val, &regs->idr0);
+	hal2_write(0, &regs->idr1);
+	hal2_write(0, &regs->idr2);
+	hal2_write(0, &regs->idr3);
+	hal2_write(H2_WRITE_ADDR(addr), &regs->iar);
+	H2_INDIRECT_WAIT(regs);
+}
+
+static void hal2_i_write32(struct snd_hal2 *hal2, u16 addr, u32 val)
+{
+	struct hal2_ctl_regs *regs = hal2->ctl_regs;
+
+	hal2_write(val & 0xffff, &regs->idr0);
+	hal2_write(val >> 16, &regs->idr1);
+	hal2_write(0, &regs->idr2);
+	hal2_write(0, &regs->idr3);
+	hal2_write(H2_WRITE_ADDR(addr), &regs->iar);
+	H2_INDIRECT_WAIT(regs);
+}
+
+static void hal2_i_setbit16(struct snd_hal2 *hal2, u16 addr, u16 bit)
+{
+	struct hal2_ctl_regs *regs = hal2->ctl_regs;
+
+	hal2_write(H2_READ_ADDR(addr), &regs->iar);
+	H2_INDIRECT_WAIT(regs);
+	hal2_write((hal2_read(&regs->idr0) & 0xffff) | bit, &regs->idr0);
+	hal2_write(0, &regs->idr1);
+	hal2_write(0, &regs->idr2);
+	hal2_write(0, &regs->idr3);
+	hal2_write(H2_WRITE_ADDR(addr), &regs->iar);
+	H2_INDIRECT_WAIT(regs);
+}
+
+static void hal2_i_clearbit16(struct snd_hal2 *hal2, u16 addr, u16 bit)
+{
+	struct hal2_ctl_regs *regs = hal2->ctl_regs;
+
+	hal2_write(H2_READ_ADDR(addr), &regs->iar);
+	H2_INDIRECT_WAIT(regs);
+	hal2_write((hal2_read(&regs->idr0) & 0xffff) & ~bit, &regs->idr0);
+	hal2_write(0, &regs->idr1);
+	hal2_write(0, &regs->idr2);
+	hal2_write(0, &regs->idr3);
+	hal2_write(H2_WRITE_ADDR(addr), &regs->iar);
+	H2_INDIRECT_WAIT(regs);
+}
+
+static int hal2_gain_info(struct snd_kcontrol *kcontrol,
+			       struct snd_ctl_elem_info *uinfo)
+{
+	uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+	uinfo->count = 2;
+	uinfo->value.integer.min = 0;
+	switch ((int)kcontrol->private_value) {
+	case H2_MIX_OUTPUT_ATT:
+		uinfo->value.integer.max = 31;
+		break;
+	case H2_MIX_INPUT_GAIN:
+		uinfo->value.integer.max = 15;
+		break;
+	}
+	return 0;
+}
+
+static int hal2_gain_get(struct snd_kcontrol *kcontrol,
+			       struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_hal2 *hal2 = snd_kcontrol_chip(kcontrol);
+	u32 tmp;
+	int l, r;
+
+	switch ((int)kcontrol->private_value) {
+	case H2_MIX_OUTPUT_ATT:
+		tmp = hal2_i_read32(hal2, H2I_DAC_C2);
+		if (tmp & H2I_C2_MUTE) {
+			l = 0;
+			r = 0;
+		} else {
+			l = 31 - ((tmp >> H2I_C2_L_ATT_SHIFT) & 31);
+			r = 31 - ((tmp >> H2I_C2_R_ATT_SHIFT) & 31);
+		}
+		break;
+	case H2_MIX_INPUT_GAIN:
+		tmp = hal2_i_read32(hal2, H2I_ADC_C2);
+		l = (tmp >> H2I_C2_L_GAIN_SHIFT) & 15;
+		r = (tmp >> H2I_C2_R_GAIN_SHIFT) & 15;
+		break;
+	}
+	ucontrol->value.integer.value[0] = l;
+	ucontrol->value.integer.value[1] = r;
+
+	return 0;
+}
+
+static int hal2_gain_put(struct snd_kcontrol *kcontrol,
+			 struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_hal2 *hal2 = snd_kcontrol_chip(kcontrol);
+	u32 old, new;
+	int l, r;
+
+	l = ucontrol->value.integer.value[0];
+	r = ucontrol->value.integer.value[1];
+
+	switch ((int)kcontrol->private_value) {
+	case H2_MIX_OUTPUT_ATT:
+		old = hal2_i_read32(hal2, H2I_DAC_C2);
+		new = old & ~(H2I_C2_L_ATT_M | H2I_C2_R_ATT_M | H2I_C2_MUTE);
+		if (l | r) {
+			l = 31 - l;
+			r = 31 - r;
+			new |= (l << H2I_C2_L_ATT_SHIFT);
+			new |= (r << H2I_C2_R_ATT_SHIFT);
+		} else
+			new |= H2I_C2_L_ATT_M | H2I_C2_R_ATT_M | H2I_C2_MUTE;
+		hal2_i_write32(hal2, H2I_DAC_C2, new);
+		break;
+	case H2_MIX_INPUT_GAIN:
+		old = hal2_i_read32(hal2, H2I_ADC_C2);
+		new = old & ~(H2I_C2_L_GAIN_M | H2I_C2_R_GAIN_M);
+		new |= (l << H2I_C2_L_GAIN_SHIFT);
+		new |= (r << H2I_C2_R_GAIN_SHIFT);
+		hal2_i_write32(hal2, H2I_ADC_C2, new);
+		break;
+	}
+	return old != new;
+}
+
+static struct snd_kcontrol_new hal2_ctrl_headphone __devinitdata = {
+	.iface          = SNDRV_CTL_ELEM_IFACE_MIXER,
+	.name           = "Headphone Playback Volume",
+	.access         = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+	.private_value  = H2_MIX_OUTPUT_ATT,
+	.info           = hal2_gain_info,
+	.get            = hal2_gain_get,
+	.put            = hal2_gain_put,
+};
+
+static struct snd_kcontrol_new hal2_ctrl_mic __devinitdata = {
+	.iface          = SNDRV_CTL_ELEM_IFACE_MIXER,
+	.name           = "Mic Capture Volume",
+	.access         = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+	.private_value  = H2_MIX_INPUT_GAIN,
+	.info           = hal2_gain_info,
+	.get            = hal2_gain_get,
+	.put            = hal2_gain_put,
+};
+
+static int __devinit hal2_mixer_create(struct snd_hal2 *hal2)
+{
+	int err;
+
+	/* mute DAC */
+	hal2_i_write32(hal2, H2I_DAC_C2,
+		       H2I_C2_L_ATT_M | H2I_C2_R_ATT_M | H2I_C2_MUTE);
+	/* mute ADC */
+	hal2_i_write32(hal2, H2I_ADC_C2, 0);
+
+	err = snd_ctl_add(hal2->card,
+			  snd_ctl_new1(&hal2_ctrl_headphone, hal2));
+	if (err < 0)
+		return err;
+
+	err = snd_ctl_add(hal2->card,
+			  snd_ctl_new1(&hal2_ctrl_mic, hal2));
+	if (err < 0)
+		return err;
+
+	return 0;
+}
+
+static irqreturn_t hal2_interrupt(int irq, void *dev_id)
+{
+	struct snd_hal2 *hal2 = dev_id;
+	irqreturn_t ret = IRQ_NONE;
+
+	/* decide what caused this interrupt */
+	if (hal2->dac.pbus.pbus->pbdma_ctrl & HPC3_PDMACTRL_INT) {
+		snd_pcm_period_elapsed(hal2->dac.substream);
+		ret = IRQ_HANDLED;
+	}
+	if (hal2->adc.pbus.pbus->pbdma_ctrl & HPC3_PDMACTRL_INT) {
+		snd_pcm_period_elapsed(hal2->adc.substream);
+		ret = IRQ_HANDLED;
+	}
+	return ret;
+}
+
+static int hal2_compute_rate(struct hal2_codec *codec, unsigned int rate)
+{
+	unsigned short mod;
+
+	if (44100 % rate < 48000 % rate) {
+		mod = 4 * 44100 / rate;
+		codec->master = 44100;
+	} else {
+		mod = 4 * 48000 / rate;
+		codec->master = 48000;
+	}
+
+	codec->inc = 4;
+	codec->mod = mod;
+	rate = 4 * codec->master / mod;
+
+	return rate;
+}
+
+static void hal2_set_dac_rate(struct snd_hal2 *hal2)
+{
+	unsigned int master = hal2->dac.master;
+	int inc = hal2->dac.inc;
+	int mod = hal2->dac.mod;
+
+	hal2_i_write16(hal2, H2I_BRES1_C1, (master == 44100) ? 1 : 0);
+	hal2_i_write32(hal2, H2I_BRES1_C2,
+		       ((0xffff & (inc - mod - 1)) << 16) | inc);
+}
+
+static void hal2_set_adc_rate(struct snd_hal2 *hal2)
+{
+	unsigned int master = hal2->adc.master;
+	int inc = hal2->adc.inc;
+	int mod = hal2->adc.mod;
+
+	hal2_i_write16(hal2, H2I_BRES2_C1, (master == 44100) ? 1 : 0);
+	hal2_i_write32(hal2, H2I_BRES2_C2,
+		       ((0xffff & (inc - mod - 1)) << 16) | inc);
+}
+
+static void hal2_setup_dac(struct snd_hal2 *hal2)
+{
+	unsigned int fifobeg, fifoend, highwater, sample_size;
+	struct hal2_pbus *pbus = &hal2->dac.pbus;
+
+	/* Now we set up some PBUS information. The PBUS needs information about
+	 * what portion of the fifo it will use. If it's receiving or
+	 * transmitting, and finally whether the stream is little endian or big
+	 * endian. The information is written later, on the start call.
+	 */
+	sample_size = 2 * hal2->dac.voices;
+	/* Fifo should be set to hold exactly four samples. Highwater mark
+	 * should be set to two samples. */
+	highwater = (sample_size * 2) >> 1;	/* halfwords */
+	fifobeg = 0;				/* playback is first */
+	fifoend = (sample_size * 4) >> 3;	/* doublewords */
+	pbus->ctrl = HPC3_PDMACTRL_RT | HPC3_PDMACTRL_LD |
+		     (highwater << 8) | (fifobeg << 16) | (fifoend << 24);
+	/* We disable everything before we do anything at all */
+	pbus->pbus->pbdma_ctrl = HPC3_PDMACTRL_LD;
+	hal2_i_clearbit16(hal2, H2I_DMA_PORT_EN, H2I_DMA_PORT_EN_CODECTX);
+	/* Setup the HAL2 for playback */
+	hal2_set_dac_rate(hal2);
+	/* Set endianess */
+	hal2_i_clearbit16(hal2, H2I_DMA_END, H2I_DMA_END_CODECTX);
+	/* Set DMA bus */
+	hal2_i_setbit16(hal2, H2I_DMA_DRV, (1 << pbus->pbusnr));
+	/* We are using 1st Bresenham clock generator for playback */
+	hal2_i_write16(hal2, H2I_DAC_C1, (pbus->pbusnr << H2I_C1_DMA_SHIFT)
+			| (1 << H2I_C1_CLKID_SHIFT)
+			| (hal2->dac.voices << H2I_C1_DATAT_SHIFT));
+}
+
+static void hal2_setup_adc(struct snd_hal2 *hal2)
+{
+	unsigned int fifobeg, fifoend, highwater, sample_size;
+	struct hal2_pbus *pbus = &hal2->adc.pbus;
+
+	sample_size = 2 * hal2->adc.voices;
+	highwater = (sample_size * 2) >> 1;		/* halfwords */
+	fifobeg = (4 * 4) >> 3;				/* record is second */
+	fifoend = (4 * 4 + sample_size * 4) >> 3;	/* doublewords */
+	pbus->ctrl = HPC3_PDMACTRL_RT | HPC3_PDMACTRL_RCV | HPC3_PDMACTRL_LD |
+		     (highwater << 8) | (fifobeg << 16) | (fifoend << 24);
+	pbus->pbus->pbdma_ctrl = HPC3_PDMACTRL_LD;
+	hal2_i_clearbit16(hal2, H2I_DMA_PORT_EN, H2I_DMA_PORT_EN_CODECR);
+	/* Setup the HAL2 for record */
+	hal2_set_adc_rate(hal2);
+	/* Set endianess */
+	hal2_i_clearbit16(hal2, H2I_DMA_END, H2I_DMA_END_CODECR);
+	/* Set DMA bus */
+	hal2_i_setbit16(hal2, H2I_DMA_DRV, (1 << pbus->pbusnr));
+	/* We are using 2nd Bresenham clock generator for record */
+	hal2_i_write16(hal2, H2I_ADC_C1, (pbus->pbusnr << H2I_C1_DMA_SHIFT)
+			| (2 << H2I_C1_CLKID_SHIFT)
+			| (hal2->adc.voices << H2I_C1_DATAT_SHIFT));
+}
+
+static void hal2_start_dac(struct snd_hal2 *hal2)
+{
+	struct hal2_pbus *pbus = &hal2->dac.pbus;
+
+	pbus->pbus->pbdma_dptr = hal2->dac.desc_dma;
+	pbus->pbus->pbdma_ctrl = pbus->ctrl | HPC3_PDMACTRL_ACT;
+	/* enable DAC */
+	hal2_i_setbit16(hal2, H2I_DMA_PORT_EN, H2I_DMA_PORT_EN_CODECTX);
+}
+
+static void hal2_start_adc(struct snd_hal2 *hal2)
+{
+	struct hal2_pbus *pbus = &hal2->adc.pbus;
+
+	pbus->pbus->pbdma_dptr = hal2->adc.desc_dma;
+	pbus->pbus->pbdma_ctrl = pbus->ctrl | HPC3_PDMACTRL_ACT;
+	/* enable ADC */
+	hal2_i_setbit16(hal2, H2I_DMA_PORT_EN, H2I_DMA_PORT_EN_CODECR);
+}
+
+static inline void hal2_stop_dac(struct snd_hal2 *hal2)
+{
+	hal2->dac.pbus.pbus->pbdma_ctrl = HPC3_PDMACTRL_LD;
+	/* The HAL2 itself may remain enabled safely */
+}
+
+static inline void hal2_stop_adc(struct snd_hal2 *hal2)
+{
+	hal2->adc.pbus.pbus->pbdma_ctrl = HPC3_PDMACTRL_LD;
+}
+
+static int hal2_alloc_dmabuf(struct hal2_codec *codec)
+{
+	struct hal2_desc *desc;
+	dma_addr_t desc_dma, buffer_dma;
+	int count = H2_BUF_SIZE / H2_BLOCK_SIZE;
+	int i;
+
+	codec->buffer = dma_alloc_noncoherent(NULL, H2_BUF_SIZE,
+					      &buffer_dma, GFP_KERNEL);
+	if (!codec->buffer)
+		return -ENOMEM;
+	desc = dma_alloc_noncoherent(NULL, count * sizeof(struct hal2_desc),
+				     &desc_dma, GFP_KERNEL);
+	if (!desc) {
+		dma_free_noncoherent(NULL, H2_BUF_SIZE,
+				     codec->buffer, buffer_dma);
+		return -ENOMEM;
+	}
+	codec->buffer_dma = buffer_dma;
+	codec->desc_dma = desc_dma;
+	codec->desc = desc;
+	for (i = 0; i < count; i++) {
+		desc->desc.pbuf = buffer_dma + i * H2_BLOCK_SIZE;
+		desc->desc.cntinfo = HPCDMA_XIE | H2_BLOCK_SIZE;
+		desc->desc.pnext = (i == count - 1) ?
+		      desc_dma : desc_dma + (i + 1) * sizeof(struct hal2_desc);
+		desc++;
+	}
+	dma_cache_sync(NULL, codec->desc, count * sizeof(struct hal2_desc),
+		       DMA_TO_DEVICE);
+	codec->desc_count = count;
+	return 0;
+}
+
+static void hal2_free_dmabuf(struct hal2_codec *codec)
+{
+	dma_free_noncoherent(NULL, codec->desc_count * sizeof(struct hal2_desc),
+			     codec->desc, codec->desc_dma);
+	dma_free_noncoherent(NULL, H2_BUF_SIZE, codec->buffer,
+			     codec->buffer_dma);
+}
+
+static struct snd_pcm_hardware hal2_pcm_hw = {
+	.info = (SNDRV_PCM_INFO_MMAP |
+		 SNDRV_PCM_INFO_MMAP_VALID |
+		 SNDRV_PCM_INFO_INTERLEAVED |
+		 SNDRV_PCM_INFO_BLOCK_TRANSFER),
+	.formats =          SNDRV_PCM_FMTBIT_S16_BE,
+	.rates =            SNDRV_PCM_RATE_8000_48000,
+	.rate_min =         8000,
+	.rate_max =         48000,
+	.channels_min =     2,
+	.channels_max =     2,
+	.buffer_bytes_max = 65536,
+	.period_bytes_min = 1024,
+	.period_bytes_max = 65536,
+	.periods_min =      2,
+	.periods_max =      1024,
+};
+
+static int hal2_pcm_hw_params(struct snd_pcm_substream *substream,
+			      struct snd_pcm_hw_params *params)
+{
+	int err;
+
+	err = snd_pcm_lib_malloc_pages(substream, params_buffer_bytes(params));
+	if (err < 0)
+		return err;
+
+	return 0;
+}
+
+static int hal2_pcm_hw_free(struct snd_pcm_substream *substream)
+{
+	return snd_pcm_lib_free_pages(substream);
+}
+
+static int hal2_playback_open(struct snd_pcm_substream *substream)
+{
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct snd_hal2 *hal2 = snd_pcm_substream_chip(substream);
+	int err;
+
+	runtime->hw = hal2_pcm_hw;
+
+	err = hal2_alloc_dmabuf(&hal2->dac);
+	if (err)
+		return err;
+	return 0;
+}
+
+static int hal2_playback_close(struct snd_pcm_substream *substream)
+{
+	struct snd_hal2 *hal2 = snd_pcm_substream_chip(substream);
+
+	hal2_free_dmabuf(&hal2->dac);
+	return 0;
+}
+
+static int hal2_playback_prepare(struct snd_pcm_substream *substream)
+{
+	struct snd_hal2 *hal2 = snd_pcm_substream_chip(substream);
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct hal2_codec *dac = &hal2->dac;
+
+	dac->voices = runtime->channels;
+	dac->sample_rate = hal2_compute_rate(dac, runtime->rate);
+	memset(&dac->pcm_indirect, 0, sizeof(dac->pcm_indirect));
+	dac->pcm_indirect.hw_buffer_size = H2_BUF_SIZE;
+	dac->pcm_indirect.sw_buffer_size = snd_pcm_lib_buffer_bytes(substream);
+	dac->substream = substream;
+	hal2_setup_dac(hal2);
+	return 0;
+}
+
+static int hal2_playback_trigger(struct snd_pcm_substream *substream, int cmd)
+{
+	struct snd_hal2 *hal2 = snd_pcm_substream_chip(substream);
+
+	switch (cmd) {
+	case SNDRV_PCM_TRIGGER_START:
+		hal2->dac.pcm_indirect.hw_io = hal2->dac.buffer_dma;
+		hal2->dac.pcm_indirect.hw_data = 0;
+		substream->ops->ack(substream);
+		hal2_start_dac(hal2);
+		break;
+	case SNDRV_PCM_TRIGGER_STOP:
+		hal2_stop_dac(hal2);
+		break;
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static snd_pcm_uframes_t
+hal2_playback_pointer(struct snd_pcm_substream *substream)
+{
+	struct snd_hal2 *hal2 = snd_pcm_substream_chip(substream);
+	struct hal2_codec *dac = &hal2->dac;
+
+	return snd_pcm_indirect_playback_pointer(substream, &dac->pcm_indirect,
+						 dac->pbus.pbus->pbdma_bptr);
+}
+
+static void hal2_playback_transfer(struct snd_pcm_substream *substream,
+				   struct snd_pcm_indirect *rec, size_t bytes)
+{
+	struct snd_hal2 *hal2 = snd_pcm_substream_chip(substream);
+	unsigned char *buf = hal2->dac.buffer + rec->hw_data;
+
+	memcpy(buf, substream->runtime->dma_area + rec->sw_data, bytes);
+	dma_cache_sync(NULL, buf, bytes, DMA_TO_DEVICE);
+
+}
+
+static int hal2_playback_ack(struct snd_pcm_substream *substream)
+{
+	struct snd_hal2 *hal2 = snd_pcm_substream_chip(substream);
+	struct hal2_codec *dac = &hal2->dac;
+
+	dac->pcm_indirect.hw_queue_size = H2_BUF_SIZE / 2;
+	snd_pcm_indirect_playback_transfer(substream,
+					   &dac->pcm_indirect,
+					   hal2_playback_transfer);
+	return 0;
+}
+
+static int hal2_capture_open(struct snd_pcm_substream *substream)
+{
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct snd_hal2 *hal2 = snd_pcm_substream_chip(substream);
+	struct hal2_codec *adc = &hal2->adc;
+	int err;
+
+	runtime->hw = hal2_pcm_hw;
+
+	err = hal2_alloc_dmabuf(adc);
+	if (err)
+		return err;
+	return 0;
+}
+
+static int hal2_capture_close(struct snd_pcm_substream *substream)
+{
+	struct snd_hal2 *hal2 = snd_pcm_substream_chip(substream);
+
+	hal2_free_dmabuf(&hal2->adc);
+	return 0;
+}
+
+static int hal2_capture_prepare(struct snd_pcm_substream *substream)
+{
+	struct snd_hal2 *hal2 = snd_pcm_substream_chip(substream);
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct hal2_codec *adc = &hal2->adc;
+
+	adc->voices = runtime->channels;
+	adc->sample_rate = hal2_compute_rate(adc, runtime->rate);
+	memset(&adc->pcm_indirect, 0, sizeof(adc->pcm_indirect));
+	adc->pcm_indirect.hw_buffer_size = H2_BUF_SIZE;
+	adc->pcm_indirect.hw_queue_size = H2_BUF_SIZE / 2;
+	adc->pcm_indirect.sw_buffer_size = snd_pcm_lib_buffer_bytes(substream);
+	adc->substream = substream;
+	hal2_setup_adc(hal2);
+	return 0;
+}
+
+static int hal2_capture_trigger(struct snd_pcm_substream *substream, int cmd)
+{
+	struct snd_hal2 *hal2 = snd_pcm_substream_chip(substream);
+
+	switch (cmd) {
+	case SNDRV_PCM_TRIGGER_START:
+		hal2->adc.pcm_indirect.hw_io = hal2->adc.buffer_dma;
+		hal2->adc.pcm_indirect.hw_data = 0;
+		printk(KERN_DEBUG "buffer_dma %x\n", hal2->adc.buffer_dma);
+		hal2_start_adc(hal2);
+		break;
+	case SNDRV_PCM_TRIGGER_STOP:
+		hal2_stop_adc(hal2);
+		break;
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static snd_pcm_uframes_t
+hal2_capture_pointer(struct snd_pcm_substream *substream)
+{
+	struct snd_hal2 *hal2 = snd_pcm_substream_chip(substream);
+	struct hal2_codec *adc = &hal2->adc;
+
+	return snd_pcm_indirect_capture_pointer(substream, &adc->pcm_indirect,
+						adc->pbus.pbus->pbdma_bptr);
+}
+
+static void hal2_capture_transfer(struct snd_pcm_substream *substream,
+				  struct snd_pcm_indirect *rec, size_t bytes)
+{
+	struct snd_hal2 *hal2 = snd_pcm_substream_chip(substream);
+	unsigned char *buf = hal2->adc.buffer + rec->hw_data;
+
+	dma_cache_sync(NULL, buf, bytes, DMA_FROM_DEVICE);
+	memcpy(substream->runtime->dma_area + rec->sw_data, buf, bytes);
+}
+
+static int hal2_capture_ack(struct snd_pcm_substream *substream)
+{
+	struct snd_hal2 *hal2 = snd_pcm_substream_chip(substream);
+	struct hal2_codec *adc = &hal2->adc;
+
+	snd_pcm_indirect_capture_transfer(substream,
+					  &adc->pcm_indirect,
+					  hal2_capture_transfer);
+	return 0;
+}
+
+static struct snd_pcm_ops hal2_playback_ops = {
+	.open =        hal2_playback_open,
+	.close =       hal2_playback_close,
+	.ioctl =       snd_pcm_lib_ioctl,
+	.hw_params =   hal2_pcm_hw_params,
+	.hw_free =     hal2_pcm_hw_free,
+	.prepare =     hal2_playback_prepare,
+	.trigger =     hal2_playback_trigger,
+	.pointer =     hal2_playback_pointer,
+	.ack =         hal2_playback_ack,
+};
+
+static struct snd_pcm_ops hal2_capture_ops = {
+	.open =        hal2_capture_open,
+	.close =       hal2_capture_close,
+	.ioctl =       snd_pcm_lib_ioctl,
+	.hw_params =   hal2_pcm_hw_params,
+	.hw_free =     hal2_pcm_hw_free,
+	.prepare =     hal2_capture_prepare,
+	.trigger =     hal2_capture_trigger,
+	.pointer =     hal2_capture_pointer,
+	.ack =         hal2_capture_ack,
+};
+
+static int __devinit hal2_pcm_create(struct snd_hal2 *hal2)
+{
+	struct snd_pcm *pcm;
+	int err;
+
+	/* create first pcm device with one outputs and one input */
+	err = snd_pcm_new(hal2->card, "SGI HAL2 Audio", 0, 1, 1, &pcm);
+	if (err < 0)
+		return err;
+
+	pcm->private_data = hal2;
+	strcpy(pcm->name, "SGI HAL2");
+
+	/* set operators */
+	snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK,
+			&hal2_playback_ops);
+	snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE,
+			&hal2_capture_ops);
+	snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_CONTINUOUS,
+					   snd_dma_continuous_data(GFP_KERNEL),
+					   0, 1024 * 1024);
+
+	return 0;
+}
+
+static int hal2_dev_free(struct snd_device *device)
+{
+	struct snd_hal2 *hal2 = device->device_data;
+
+	free_irq(SGI_HPCDMA_IRQ, hal2);
+	kfree(hal2);
+	return 0;
+}
+
+static struct snd_device_ops hal2_ops = {
+	.dev_free = hal2_dev_free,
+};
+
+static void hal2_init_codec(struct hal2_codec *codec, struct hpc3_regs *hpc3,
+			    int index)
+{
+	codec->pbus.pbusnr = index;
+	codec->pbus.pbus = &hpc3->pbdma[index];
+}
+
+static int hal2_detect(struct snd_hal2 *hal2)
+{
+	unsigned short board, major, minor;
+	unsigned short rev;
+
+	/* reset HAL2 */
+	hal2_write(0, &hal2->ctl_regs->isr);
+
+	/* release reset */
+	hal2_write(H2_ISR_GLOBAL_RESET_N | H2_ISR_CODEC_RESET_N,
+		   &hal2->ctl_regs->isr);
+
+
+	hal2_i_write16(hal2, H2I_RELAY_C, H2I_RELAY_C_STATE);
+	rev = hal2_read(&hal2->ctl_regs->rev);
+	if (rev & H2_REV_AUDIO_PRESENT)
+		return -ENODEV;
+
+	board = (rev & H2_REV_BOARD_M) >> 12;
+	major = (rev & H2_REV_MAJOR_CHIP_M) >> 4;
+	minor = (rev & H2_REV_MINOR_CHIP_M);
+
+	printk(KERN_INFO "SGI HAL2 revision %i.%i.%i\n",
+	       board, major, minor);
+
+	return 0;
+}
+
+static int hal2_create(struct snd_card *card, struct snd_hal2 **rchip)
+{
+	struct snd_hal2 *hal2;
+	struct hpc3_regs *hpc3 = hpc3c0;
+	int err;
+
+	hal2 = kzalloc(sizeof(struct snd_hal2), GFP_KERNEL);
+	if (!hal2)
+		return -ENOMEM;
+
+	hal2->card = card;
+
+	if (request_irq(SGI_HPCDMA_IRQ, hal2_interrupt, IRQF_SHARED,
+			"SGI HAL2", hal2)) {
+		printk(KERN_ERR "HAL2: Can't get irq %d\n", SGI_HPCDMA_IRQ);
+		kfree(hal2);
+		return -EAGAIN;
+	}
+
+	hal2->ctl_regs = (struct hal2_ctl_regs *)hpc3->pbus_extregs[0];
+	hal2->aes_regs = (struct hal2_aes_regs *)hpc3->pbus_extregs[1];
+	hal2->vol_regs = (struct hal2_vol_regs *)hpc3->pbus_extregs[2];
+	hal2->syn_regs = (struct hal2_syn_regs *)hpc3->pbus_extregs[3];
+
+	if (hal2_detect(hal2) < 0) {
+		kfree(hal2);
+		return -ENODEV;
+	}
+
+	hal2_init_codec(&hal2->dac, hpc3, 0);
+	hal2_init_codec(&hal2->adc, hpc3, 1);
+
+	/*
+	 * All DMA channel interfaces in HAL2 are designed to operate with
+	 * PBUS programmed for 2 cycles in D3, 2 cycles in D4 and 2 cycles
+	 * in D5. HAL2 is a 16-bit device which can accept both big and little
+	 * endian format. It assumes that even address bytes are on high
+	 * portion of PBUS (15:8) and assumes that HPC3 is programmed to
+	 * accept a live (unsynchronized) version of P_DREQ_N from HAL2.
+	 */
+#define HAL2_PBUS_DMACFG ((0 << HPC3_DMACFG_D3R_SHIFT) | \
+			  (2 << HPC3_DMACFG_D4R_SHIFT) | \
+			  (2 << HPC3_DMACFG_D5R_SHIFT) | \
+			  (0 << HPC3_DMACFG_D3W_SHIFT) | \
+			  (2 << HPC3_DMACFG_D4W_SHIFT) | \
+			  (2 << HPC3_DMACFG_D5W_SHIFT) | \
+				HPC3_DMACFG_DS16 | \
+				HPC3_DMACFG_EVENHI | \
+				HPC3_DMACFG_RTIME | \
+			  (8 << HPC3_DMACFG_BURST_SHIFT) | \
+				HPC3_DMACFG_DRQLIVE)
+	/*
+	 * Ignore what's mentioned in the specification and write value which
+	 * works in The Real World (TM)
+	 */
+	hpc3->pbus_dmacfg[hal2->dac.pbus.pbusnr][0] = 0x8208844;
+	hpc3->pbus_dmacfg[hal2->adc.pbus.pbusnr][0] = 0x8208844;
+
+	err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, hal2, &hal2_ops);
+	if (err < 0) {
+		free_irq(SGI_HPCDMA_IRQ, hal2);
+		kfree(hal2);
+		return err;
+	}
+	*rchip = hal2;
+	return 0;
+}
+
+static int __devinit hal2_probe(struct platform_device *pdev)
+{
+	struct snd_card *card;
+	struct snd_hal2 *chip;
+	int err;
+
+	card = snd_card_new(index, id, THIS_MODULE, 0);
+	if (card == NULL)
+		return -ENOMEM;
+
+	err = hal2_create(card, &chip);
+	if (err < 0) {
+		snd_card_free(card);
+		return err;
+	}
+	snd_card_set_dev(card, &pdev->dev);
+
+	err = hal2_pcm_create(chip);
+	if (err < 0) {
+		snd_card_free(card);
+		return err;
+	}
+	err = hal2_mixer_create(chip);
+	if (err < 0) {
+		snd_card_free(card);
+		return err;
+	}
+
+	strcpy(card->driver, "SGI HAL2 Audio");
+	strcpy(card->shortname, "SGI HAL2 Audio");
+	sprintf(card->longname, "%s irq %i",
+		card->shortname,
+		SGI_HPCDMA_IRQ);
+
+	err = snd_card_register(card);
+	if (err < 0) {
+		snd_card_free(card);
+		return err;
+	}
+	platform_set_drvdata(pdev, card);
+	return 0;
+}
+
+static int __exit hal2_remove(struct platform_device *pdev)
+{
+	struct snd_card *card = platform_get_drvdata(pdev);
+
+	snd_card_free(card);
+	platform_set_drvdata(pdev, NULL);
+	return 0;
+}
+
+static struct platform_driver hal2_driver = {
+	.probe	= hal2_probe,
+	.remove	= __devexit_p(hal2_remove),
+	.driver = {
+		.name	= "sgihal2",
+		.owner	= THIS_MODULE,
+	}
+};
+
+static int __init alsa_card_hal2_init(void)
+{
+	return platform_driver_register(&hal2_driver);
+}
+
+static void __exit alsa_card_hal2_exit(void)
+{
+	platform_driver_unregister(&hal2_driver);
+}
+
+module_init(alsa_card_hal2_init);
+module_exit(alsa_card_hal2_exit);

sound/mips/hal2.h

···
+#ifndef __HAL2_H
+#define __HAL2_H
+
+/*
+ *  Driver for HAL2 sound processors
+ *  Copyright (c) 1999 Ulf Carlsson <[e-mail]>
+ *  Copyright (c) 2001, 2002, 2003 Ladislav Michl <[e-mail]>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <linux/types.h>
+
+/* Indirect status register */
+
+#define H2_ISR_TSTATUS		0x01	/* RO: transaction status 1=busy */
+#define H2_ISR_USTATUS		0x02	/* RO: utime status bit 1=armed */
+#define H2_ISR_QUAD_MODE	0x04	/* codec mode 0=indigo 1=quad */
+#define H2_ISR_GLOBAL_RESET_N	0x08	/* chip global reset 0=reset */
+#define H2_ISR_CODEC_RESET_N	0x10	/* codec/synth reset 0=reset  */
+
+/* Revision register */
+
+#define H2_REV_AUDIO_PRESENT	0x8000	/* RO: audio present 0=present */
+#define H2_REV_BOARD_M		0x7000	/* RO: bits 14:12, board revision */
+#define H2_REV_MAJOR_CHIP_M	0x00F0	/* RO: bits 7:4, major chip revision */
+#define H2_REV_MINOR_CHIP_M	0x000F	/* RO: bits 3:0, minor chip revision */
+
+/* Indirect address register */
+
+/*
+ * Address of indirect internal register to be accessed. A write to this
+ * register initiates read or write access to the indirect registers in the
+ * HAL2. Note that there af four indirect data registers for write access to
+ * registers larger than 16 byte.
+ */
+
+#define H2_IAR_TYPE_M		0xF000	/* bits 15:12, type of functional */
+					/* block the register resides in */
+					/* 1=DMA Port */
+					/* 9=Global DMA Control */
+					/* 2=Bresenham */
+					/* 3=Unix Timer */
+#define H2_IAR_NUM_M		0x0F00	/* bits 11:8 instance of the */
+					/* blockin which the indirect */
+					/* register resides */
+					/* If IAR_TYPE_M=DMA Port: */
+					/* 1=Synth In */
+					/* 2=AES In */
+					/* 3=AES Out */
+					/* 4=DAC Out */
+					/* 5=ADC Out */
+					/* 6=Synth Control */
+					/* If IAR_TYPE_M=Global DMA Control: */
+					/* 1=Control */
+					/* If IAR_TYPE_M=Bresenham: */
+					/* 1=Bresenham Clock Gen 1 */
+					/* 2=Bresenham Clock Gen 2 */
+					/* 3=Bresenham Clock Gen 3 */
+					/* If IAR_TYPE_M=Unix Timer: */
+					/* 1=Unix Timer */
+#define H2_IAR_ACCESS_SELECT	0x0080	/* 1=read 0=write */
+#define H2_IAR_PARAM		0x000C	/* Parameter Select */
+#define H2_IAR_RB_INDEX_M	0x0003	/* Read Back Index */
+					/* 00:word0 */
+					/* 01:word1 */
+					/* 10:word2 */
+					/* 11:word3 */
+/*
+ * HAL2 internal addressing
+ *
+ * The HAL2 has "indirect registers" (idr) which are accessed by writing to the
+ * Indirect Data registers. Write the address to the Indirect Address register
+ * to transfer the data.
+ *
+ * We define the H2IR_* to the read address and H2IW_* to the write address and
+ * H2I_* to be fields in whatever register is referred to.
+ *
+ * When we write to indirect registers which are larger than one word (16 bit)
+ * we have to fill more than one indirect register before writing. When we read
+ * back however we have to read several times, each time with different Read
+ * Back Indexes (there are defs for doing this easily).
+ */
+
+/*
+ * Relay Control
+ */
+#define H2I_RELAY_C		0x9100
+#define H2I_RELAY_C_STATE	0x01		/* state of RELAY pin signal */
+
+/* DMA port enable */
+
+#define H2I_DMA_PORT_EN		0x9104
+#define H2I_DMA_PORT_EN_SY_IN	0x01		/* Synth_in DMA port */
+#define H2I_DMA_PORT_EN_AESRX	0x02		/* AES receiver DMA port */
+#define H2I_DMA_PORT_EN_AESTX	0x04		/* AES transmitter DMA port */
+#define H2I_DMA_PORT_EN_CODECTX	0x08		/* CODEC transmit DMA port */
+#define H2I_DMA_PORT_EN_CODECR	0x10		/* CODEC receive DMA port */
+
+#define H2I_DMA_END		0x9108 		/* global dma endian select */
+#define H2I_DMA_END_SY_IN	0x01		/* Synth_in DMA port */
+#define H2I_DMA_END_AESRX	0x02		/* AES receiver DMA port */
+#define H2I_DMA_END_AESTX	0x04		/* AES transmitter DMA port */
+#define H2I_DMA_END_CODECTX	0x08		/* CODEC transmit DMA port */
+#define H2I_DMA_END_CODECR	0x10		/* CODEC receive DMA port */
+						/* 0=b_end 1=l_end */
+
+#define H2I_DMA_DRV		0x910C  	/* global PBUS DMA enable */
+
+#define H2I_SYNTH_C		0x1104		/* Synth DMA control */
+
+#define H2I_AESRX_C		0x1204	 	/* AES RX dma control */
+
+#define H2I_C_TS_EN		0x20		/* Timestamp enable */
+#define H2I_C_TS_FRMT		0x40		/* Timestamp format */
+#define H2I_C_NAUDIO		0x80		/* Sign extend */
+
+/* AESRX CTL, 16 bit */
+
+#define H2I_AESTX_C		0x1304		/* AES TX DMA control */
+#define H2I_AESTX_C_CLKID_SHIFT	3		/* Bresenham Clock Gen 1-3 */
+#define H2I_AESTX_C_CLKID_M	0x18
+#define H2I_AESTX_C_DATAT_SHIFT	8		/* 1=mono 2=stereo (3=quad) */
+#define H2I_AESTX_C_DATAT_M	0x300
+
+/* CODEC registers */
+
+#define H2I_DAC_C1		0x1404 		/* DAC DMA control, 16 bit */
+#define H2I_DAC_C2		0x1408		/* DAC DMA control, 32 bit */
+#define H2I_ADC_C1		0x1504 		/* ADC DMA control, 16 bit */
+#define H2I_ADC_C2		0x1508		/* ADC DMA control, 32 bit */
+
+/* Bits in CTL1 register */
+
+#define H2I_C1_DMA_SHIFT	0		/* DMA channel */
+#define H2I_C1_DMA_M		0x7
+#define H2I_C1_CLKID_SHIFT	3		/* Bresenham Clock Gen 1-3 */
+#define H2I_C1_CLKID_M		0x18
+#define H2I_C1_DATAT_SHIFT	8		/* 1=mono 2=stereo (3=quad) */
+#define H2I_C1_DATAT_M		0x300
+
+/* Bits in CTL2 register */
+
+#define H2I_C2_R_GAIN_SHIFT	0		/* right a/d input gain */
+#define H2I_C2_R_GAIN_M		0xf
+#define H2I_C2_L_GAIN_SHIFT	4		/* left a/d input gain */
+#define H2I_C2_L_GAIN_M		0xf0
+#define H2I_C2_R_SEL		0x100		/* right input select */
+#define H2I_C2_L_SEL		0x200		/* left input select */
+#define H2I_C2_MUTE		0x400		/* mute */
+#define H2I_C2_DO1		0x00010000	/* digital output port bit 0 */
+#define H2I_C2_DO2		0x00020000	/* digital output port bit 1 */
+#define H2I_C2_R_ATT_SHIFT	18		/* right d/a output - */
+#define H2I_C2_R_ATT_M		0x007c0000	/* attenuation */
+#define H2I_C2_L_ATT_SHIFT	23		/* left d/a output - */
+#define H2I_C2_L_ATT_M		0x0f800000	/* attenuation */
+
+#define H2I_SYNTH_MAP_C		0x1104		/* synth dma handshake ctrl */
+
+/* Clock generator CTL 1, 16 bit */
+
+#define H2I_BRES1_C1		0x2104
+#define H2I_BRES2_C1		0x2204
+#define H2I_BRES3_C1		0x2304
+
+#define H2I_BRES_C1_SHIFT	0		/* 0=48.0 1=44.1 2=aes_rx */
+#define H2I_BRES_C1_M		0x03
+
+/* Clock generator CTL 2, 32 bit */
+
+#define H2I_BRES1_C2		0x2108
+#define H2I_BRES2_C2		0x2208
+#define H2I_BRES3_C2		0x2308
+
+#define H2I_BRES_C2_INC_SHIFT	0		/* increment value */
+#define H2I_BRES_C2_INC_M	0xffff
+#define H2I_BRES_C2_MOD_SHIFT	16		/* modcontrol value */
+#define H2I_BRES_C2_MOD_M	0xffff0000	/* modctrl=0xffff&(modinc-1) */
+
+/* Unix timer, 64 bit */
+
+#define H2I_UTIME		0x3104
+#define H2I_UTIME_0_LD		0xffff		/* microseconds, LSB's */
+#define H2I_UTIME_1_LD0		0x0f		/* microseconds, MSB's */
+#define H2I_UTIME_1_LD1		0xf0		/* tenths of microseconds */
+#define H2I_UTIME_2_LD		0xffff		/* seconds, LSB's */
+#define H2I_UTIME_3_LD		0xffff		/* seconds, MSB's */
+
+struct hal2_ctl_regs {
+	u32 _unused0[4];
+	u32 isr;		/* 0x10 Status Register */
+	u32 _unused1[3];
+	u32 rev;		/* 0x20 Revision Register */
+	u32 _unused2[3];
+	u32 iar;		/* 0x30 Indirect Address Register */
+	u32 _unused3[3];
+	u32 idr0;		/* 0x40 Indirect Data Register 0 */
+	u32 _unused4[3];
+	u32 idr1;		/* 0x50 Indirect Data Register 1 */
+	u32 _unused5[3];
+	u32 idr2;		/* 0x60 Indirect Data Register 2 */
+	u32 _unused6[3];
+	u32 idr3;		/* 0x70 Indirect Data Register 3 */
+};
+
+struct hal2_aes_regs {
+	u32 rx_stat[2];	/* Status registers */
+	u32 rx_cr[2];		/* Control registers */
+	u32 rx_ud[4];		/* User data window */
+	u32 rx_st[24];		/* Channel status data */
+
+	u32 tx_stat[1];	/* Status register */
+	u32 tx_cr[3];		/* Control registers */
+	u32 tx_ud[4];		/* User data window */
+	u32 tx_st[24];		/* Channel status data */
+};
+
+struct hal2_vol_regs {
+	u32 right;		/* Right volume */
+	u32 left;		/* Left volume */
+};
+
+struct hal2_syn_regs {
+	u32 _unused0[2];
+	u32 page;		/* DOC Page register */
+	u32 regsel;		/* DOC Register selection */
+	u32 dlow;		/* DOC Data low */
+	u32 dhigh;		/* DOC Data high */
+	u32 irq;		/* IRQ Status */
+	u32 dram;		/* DRAM Access */
+};
+
+#endif	/* __HAL2_H */