Merge tag 'dt64-cleanup-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt into soc/dt

Minor improvements in ARM64 DTS for v6.12

1. APM: correct node name to match bindings.
2. Spreadtrum: correct node names to match bindings, order properties to
match DTS coding style and put SPDX identifier at top of the file as
expected usually.

* tag 'dt64-cleanup-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt:
arm64: dts: sprd: move/add SPDX license to top of the file
arm64: dts: sprd: reorder clock-names after clocks
arm64: dts: sprd: rename SDHCI and fuel gauge nodes to match bindings
arm64: dts: apm: storm: Rename menetphy@3 to ethernet-phy@3

Signed-off-by: Arnd Bergmann <[e-mail]>

arch/arm64/boot/dts/apm/apm-storm.dtsi

···
 				compatible = "apm,xgene-mdio";
 				#address-cells = <1>;
 				#size-cells = <0>;
-				menetphy: menetphy@3 {
+				menetphy: ethernet-phy@3 {
 					compatible = "ethernet-phy-id001c.c915";
 					reg = <0x3>;
 				};

arch/arm64/boot/dts/sprd/sc2731.dtsi

···
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Spreadtrum SC2731 PMIC dts file
  *
  * Copyright (C) 2018, Spreadtrum Communications Inc.
- *
- * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
  */
 
 &adi_bus {
···
 			nvmem-cells = <&adc_big_scale>, <&adc_small_scale>;
 		};
 
-		fgu@a00 {
+		fuel-gauge@a00 {
 			compatible = "sprd,sc2731-fgu";
 			reg = <0xa00>;
 			bat-detect-gpio = <&pmic_eic 9 GPIO_ACTIVE_HIGH>;

arch/arm64/boot/dts/sprd/sc9836-openphone.dts

···
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
 /*
  * Spreadtrum SC9836 openphone board DTS file
  *
  * Copyright (C) 2014, Spreadtrum Communications Inc.
- *
- * This file is licensed under a dual GPLv2 or X11 license.
  */
 
 /dts-v1/;

arch/arm64/boot/dts/sprd/sc9836.dtsi

···
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
 /*
  * Spreadtrum SC9836 SoC DTS file
  *
  * Copyright (C) 2014, Spreadtrum Communications Inc.
- *
- * This file is licensed under a dual GPLv2 or X11 license.
  */
 
 #include "sharkl64.dtsi"

arch/arm64/boot/dts/sprd/sc9860.dtsi

···
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Spreadtrum SC9860 SoC
  *
  * Copyright (C) 2016, Spreadtrum Communications Inc.
- *
- * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
  */
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>

arch/arm64/boot/dts/sprd/sc9863a.dtsi

···
 			#size-cells = <2>;
 			ranges;
 
-			sdio0: sdio@20300000 {
+			sdio0: mmc@20300000 {
 				compatible = "sprd,sdhci-r11";
 				reg = <0 0x20300000 0 0x1000>;
 				interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
 
-				clock-names = "sdio", "enable";
 				clocks = <&aon_clk CLK_SDIO0_2X>,
 					 <&apahb_gate CLK_SDIO0_EB>;
+				clock-names = "sdio", "enable";
 				assigned-clocks = <&aon_clk CLK_SDIO0_2X>;
 				assigned-clock-parents = <&rpll CLK_RPLL_390M>;
 
···
 				no-mmc;
 			};
 
-			sdio3: sdio@20600000 {
+			sdio3: mmc@20600000 {
 				compatible = "sprd,sdhci-r11";
 				reg = <0 0x20600000 0 0x1000>;
 				interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
 
-				clock-names = "sdio", "enable";
 				clocks = <&aon_clk CLK_EMMC_2X>,
 					 <&apahb_gate CLK_EMMC_EB>;
+				clock-names = "sdio", "enable";
 				assigned-clocks = <&aon_clk CLK_EMMC_2X>;
 				assigned-clock-parents = <&rpll CLK_RPLL_390M>;
 

arch/arm64/boot/dts/sprd/sharkl64.dtsi

···
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
 /*
  * Spreadtrum Sharkl64 platform DTS file
  *
  * Copyright (C) 2014, Spreadtrum Communications Inc.
- *
- * This file is licensed under a dual GPLv2 or X11 license.
  */
 
 / {

arch/arm64/boot/dts/sprd/sp9860g-1h10.dts

···
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Spreadtrum SP9860g board
  *
  * Copyright (C) 2017, Spreadtrum Communications Inc.
- *
- * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
  */
 
 /dts-v1/;

arch/arm64/boot/dts/sprd/ums512.dtsi

···
 				compatible = "sprd,sdhci-r11";
 				reg = <0x1100000 0x1000>;
 				interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
-				clock-names = "sdio", "enable";
 				clocks = <&ap_clk CLK_SDIO0_2X>,
 					 <&apapb_gate CLK_SDIO0_EB>;
+				clock-names = "sdio", "enable";
 				assigned-clocks = <&ap_clk CLK_SDIO0_2X>;
 				assigned-clock-parents = <&pll1 CLK_RPLL>;
 				status = "disabled";
···
 				compatible = "sprd,sdhci-r11";
 				reg = <0x1400000 0x1000>;
 				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
-				clock-names = "sdio", "enable";
 				clocks = <&ap_clk CLK_EMMC_2X>,
 					 <&apapb_gate CLK_EMMC_EB>;
+				clock-names = "sdio", "enable";
 				assigned-clocks = <&ap_clk CLK_EMMC_2X>;
 				assigned-clock-parents = <&pll1 CLK_RPLL>;
 				status = "disabled";

arch/arm64/boot/dts/sprd/whale2.dtsi

···
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Spreadtrum Whale2 platform peripherals
  *
  * Copyright (C) 2016, Spreadtrum Communications Inc.
- *
- * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
  */
 
 #include <dt-bindings/clock/sprd,sc9860-clk.h>
···
 					     "sprd,sc9836-uart";
 				reg = <0x0 0x100>;
 				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
-				clock-names = "enable", "uart", "source";
 				clocks = <&apapb_gate CLK_UART0_EB>,
-				       <&ap_clk CLK_UART0>, <&ext_26m>;
+					 <&ap_clk CLK_UART0>,
+					 <&ext_26m>;
+				clock-names = "enable", "uart", "source";
 				status = "disabled";
 			};
 
···
 					     "sprd,sc9836-uart";
 				reg = <0x100000 0x100>;
 				interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
-				clock-names = "enable", "uart", "source";
 				clocks = <&apapb_gate CLK_UART1_EB>,
-				       <&ap_clk CLK_UART1>, <&ext_26m>;
+					 <&ap_clk CLK_UART1>,
+					 <&ext_26m>;
+				clock-names = "enable", "uart", "source";
 				status = "disabled";
 			};
 
···
 					     "sprd,sc9836-uart";
 				reg = <0x200000 0x100>;
 				interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
-				clock-names = "enable", "uart", "source";
 				clocks = <&apapb_gate CLK_UART2_EB>,
-				       <&ap_clk CLK_UART2>, <&ext_26m>;
+					 <&ap_clk CLK_UART2>,
+					 <&ext_26m>;
+				clock-names = "enable", "uart", "source";
 				status = "disabled";
 			};
 
···
 					     "sprd,sc9836-uart";
 				reg = <0x300000 0x100>;
 				interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
-				clock-names = "enable", "uart", "source";
 				clocks = <&apapb_gate CLK_UART3_EB>,
-				       <&ap_clk CLK_UART3>, <&ext_26m>;
+					 <&ap_clk CLK_UART3>,
+					 <&ext_26m>;
+				clock-names = "enable", "uart", "source";
 				status = "disabled";
 			};
 		};
···
 				/* For backwards compatibility: */
 				#dma-channels = <32>;
 				dma-channels = <32>;
-				clock-names = "enable";
 				clocks = <&apahb_gate CLK_DMA_EB>;
+				clock-names = "enable";
 			};
 
-			sdio3: sdio@50430000 {
+			sdio3: mmc@50430000 {
 				compatible = "sprd,sdhci-r11";
 				reg = <0 0x50430000 0 0x1000>;
 				interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
 
-				clock-names = "sdio", "enable", "2x_enable";
 				clocks = <&aon_prediv CLK_EMMC_2X>,
-				       <&apahb_gate CLK_EMMC_EB>,
-				       <&aon_gate CLK_EMMC_2X_EN>;
+					 <&apahb_gate CLK_EMMC_EB>,
+					 <&aon_gate CLK_EMMC_2X_EN>;
+				clock-names = "sdio", "enable", "2x_enable";
 				assigned-clocks = <&aon_prediv CLK_EMMC_2X>;
 				assigned-clock-parents = <&clk_l0_409m6>;
 
···
 				compatible = "sprd,hwspinlock-r3p0";
 				reg = <0 0x40500000 0 0x1000>;
 				#hwlock-cells = <1>;
-				clock-names = "enable";
 				clocks = <&aon_gate CLK_SPLK_EB>;
+				clock-names = "enable";
 			};
 
 			eic_debounce: gpio@40210000 {
···
 				reg = <0 0x40310000 0 0x1000>;
 				interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
 				timeout-sec = <12>;
-				clock-names = "enable", "rtc_enable";
 				clocks = <&aon_gate CLK_APCPU_WDG_EB>,
-				       <&aon_gate CLK_AP_WDG_RTC_EB>;
+					 <&aon_gate CLK_AP_WDG_RTC_EB>;
+				clock-names = "enable", "rtc_enable";
 			};
 		};
 
···
 				/* For backwards compatibility: */
 				#dma-channels = <32>;
 				dma-channels = <32>;
-				clock-names = "enable", "ashb_eb";
 				clocks = <&agcp_gate CLK_AGCP_DMAAP_EB>,
-				       <&agcp_gate CLK_AGCP_AP_ASHB_EB>;
+					 <&agcp_gate CLK_AGCP_AP_ASHB_EB>;
+				clock-names = "enable", "ashb_eb";
 			};
 		};
 	};