Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC fixes from Olof Johansson:
"This week's arm-soc fixes:

- A set of of OMAP patches that we had missed Tony's pull request of:
* Reset fix for am43xx
* Proper OPP table for omap5
* Fix for SoC detection of one of the DRA7 SoCs
* hwmod updates to get SATA and OCP to work on omap5 (drivers
merged in 3.16)
* ... plus a handful of smaller fixes
- sunxi needed to re-add machine specific restart code that was
removed in anticipation of a watchdog driver being merged for 3.16,
and it didn't make it in.
- Marvell fixes for PCIe on SMP and a big-endian fix.
- A trivial defconfig update to make my capri test board boot with
bcm_defconfig again.

... and a couple of MAINTAINERS updates, one to claim new Keystone
drivers that have been merged, and one to merge MXS and i.MX (both
Freescale platforms).

The largest diffs come from the hwmod code for omap5 and the re-add of
the restart code on sunxi. The hwmod stuff is quite late at this
point but it slipped through cracks repeatedly while coming up the
maintainer chain and only affects the one SoC so risk is low"

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
MAINTAINERS: Add few more Keystone drivers
MAINTAINERS: merge MXS entry into IMX one
ARM: sunxi: Reintroduce the restart code for A10/A20 SoCs
ARM: mvebu: fix cpuidle implementation to work on big-endian systems
ARM: mvebu: update L2/PCIe deadlock workaround after L2CC cleanup
ARM: mvebu: move Armada 375 external abort logic as a quirk
ARM: bcm: Fix bcm and multi_v7 defconfigs
ARM: dts: dra7-evm: remove interrupt binding
ARM: OMAP2+: Fix parser-bug in platform muxing code
ARM: DTS: dra7/dra7xx-clocks: ATL related changes
ARM: OMAP2+: drop unused function
ARM: dts: am43x-epos-evm: Add Missing cpsw-phy-sel for am43x-epos-evm
ARM: dts: omap5: Update CPU OPP table as per final production Manual
ARM: DRA722: add detection of SoC information
ARM: dts: Enable twl4030 off-idle configuration for selected omaps
ARM: OMAP5: hwmod: Add ocp2scp3 and sata hwmods
ARM: OMAP2+: hwmod: Change hardreset soc_ops for AM43XX

MAINTAINERS

···
 S:	Maintained
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git
 F:	arch/arm/mach-imx/
+F:	arch/arm/mach-mxs/
 F:	arch/arm/boot/dts/imx*
 F:	arch/arm/configs/imx*_defconfig
-
-ARM/FREESCALE MXS ARM ARCHITECTURE
-M:	Shawn Guo <[e-mail]>
-L:	[e-mail] (moderated for non-subscribers)
-S:	Maintained
-T:	git git://git.linaro.org/people/shawnguo/linux-2.6.git
-F:	arch/arm/mach-mxs/
 
 ARM/GLOMATION GESBC9312SX MACHINE SUPPORT
 M:	Lennert Buytenhek <[e-mail]>
···
 L:	[e-mail] (moderated for non-subscribers)
 S:	Maintained
 F:	arch/arm/mach-keystone/
-F:	drivers/clk/keystone/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone.git
+
+ARM/TEXAS INSTRUMENT KEYSTONE CLOCK FRAMEWORK
+M:	Santosh Shilimkar <[e-mail]>
+L:	[e-mail]
+S:	Maintained
+F:	drivers/clk/keystone/
+
+ARM/TEXAS INSTRUMENT KEYSTONE ClOCKSOURCE
+M:	Santosh Shilimkar <[e-mail]>
+L:	[e-mail] (moderated for non-subscribers)
+L:	[e-mail]
+S:	Maintained
+F:	drivers/clocksource/timer-keystone.c
+
+ARM/TEXAS INSTRUMENT KEYSTONE RESET DRIVER
+M:	Santosh Shilimkar <[e-mail]>
+L:	[e-mail]
+S:	Maintained
+F:	drivers/power/reset/keystone-reset.c
+
+ARM/TEXAS INSTRUMENT AEMIF/EMIF DRIVERS
+M:	Santosh Shilimkar <[e-mail]>
+L:	[e-mail]
+S:	Maintained
+F:	drivers/memory/*emif*
 
 ARM/LOGICPD PXA270 MACHINE SUPPORT
 M:	Lennert Buytenhek <[e-mail]>

arch/arm/boot/dts/am43x-epos-evm.dts

···
 	phy-mode = "rmii";
 };
 
+&phy_sel {
+	rmii-clock-ext;
+};
+
 &i2c0 {
 	status = "okay";
 	pinctrl-names = "default";

arch/arm/boot/dts/dra7.dtsi

···
 			clocks = <&qspi_gfclk_div>;
 			clock-names = "fck";
 			num-cs = <4>;
-			interrupts = <0 343 0x4>;
 			status = "disabled";
 		};
 
···
 			gpmc,num-waitpins = <2>;
 			#address-cells = <2>;
 			#size-cells = <1>;
+			status = "disabled";
+		};
+
+		atl: atl@4843c000 {
+			compatible = "ti,dra7-atl";
+			reg = <0x4843c000 0x3ff>;
+			ti,hwmods = "atl";
+			ti,provided-clocks = <&atl_clkin0_ck>, <&atl_clkin1_ck>,
+					     <&atl_clkin2_ck>, <&atl_clkin3_ck>;
+			clocks = <&atl_gfclk_mux>;
+			clock-names = "fck";
 			status = "disabled";
 		};
 	};

arch/arm/boot/dts/dra7xx-clocks.dtsi

···
 &cm_core_aon_clocks {
 	atl_clkin0_ck: atl_clkin0_ck {
 		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0>;
+		compatible = "ti,dra7-atl-clock";
+		clocks = <&atl_gfclk_mux>;
 	};
 
 	atl_clkin1_ck: atl_clkin1_ck {
 		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0>;
+		compatible = "ti,dra7-atl-clock";
+		clocks = <&atl_gfclk_mux>;
 	};
 
 	atl_clkin2_ck: atl_clkin2_ck {
 		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0>;
+		compatible = "ti,dra7-atl-clock";
+		clocks = <&atl_gfclk_mux>;
 	};
 
 	atl_clkin3_ck: atl_clkin3_ck {
 		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0>;
+		compatible = "ti,dra7-atl-clock";
+		clocks = <&atl_gfclk_mux>;
 	};
 
 	hdmi_clkin_ck: hdmi_clkin_ck {

arch/arm/boot/dts/omap3-beagle-xm.dts

···
 			codec {
 			};
 		};
+
+		twl_power: power {
+			compatible = "ti,twl4030-power-beagleboard-xm", "ti,twl4030-power-idle-osc-off";
+			ti,use_poweroff;
+		};
 	};
 };
 
···
 };
 
 &uart3 {
+	interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart3_pins>;
 };

arch/arm/boot/dts/omap3-evm-common.dtsi

···
 	gpios = <&twl_gpio 18 GPIO_ACTIVE_LOW>;
 };
 
+&twl {
+	twl_power: power {
+		compatible = "ti,twl4030-power-omap3-evm", "ti,twl4030-power-idle";
+		ti,use_poweroff;
+	};
+};
+
 &i2c2 {
 	clock-frequency = <400000>;
 };

arch/arm/boot/dts/omap3-n900.dts

···
 		compatible = "ti,twl4030-audio";
 		ti,enable-vibra = <1>;
 	};
+
+	twl_power: power {
+		compatible = "ti,twl4030-power-n900", "ti,twl4030-power-idle-osc-off";
+		ti,use_poweroff;
+	};
 };
 
 &twl_keypad {

arch/arm/boot/dts/omap5.dtsi

···
 
 			operating-points = <
 				/* kHz    uV */
-				500000  880000
 				1000000 1060000
 				1500000 1250000
 			>;

arch/arm/configs/bcm_defconfig

···
 CONFIG_BACKLIGHT_PWM=y
 # CONFIG_USB_SUPPORT is not set
 CONFIG_MMC=y
-CONFIG_MMC_UNSAFE_RESUME=y
 CONFIG_MMC_BLOCK_MINORS=32
 CONFIG_MMC_TEST=y
 CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_PLTFM=y
 CONFIG_MMC_SDHCI_BCM_KONA=y
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y

arch/arm/configs/multi_v7_defconfig

···
 CONFIG_POWER_RESET_SUN6I=y
 CONFIG_SENSORS_LM90=y
 CONFIG_THERMAL=y
-CONFIG_DOVE_THERMAL=y
 CONFIG_ARMADA_THERMAL=y
 CONFIG_WATCHDOG=y
 CONFIG_ORION_WATCHDOG=y
 CONFIG_SUNXI_WATCHDOG=y
 CONFIG_MFD_AS3722=y
+CONFIG_MFD_BCM590XX=y
 CONFIG_MFD_CROS_EC=y
 CONFIG_MFD_CROS_EC_SPI=y
 CONFIG_MFD_MAX8907=y
···
 CONFIG_REGULATOR_VIRTUAL_CONSUMER=y
 CONFIG_REGULATOR_AB8500=y
 CONFIG_REGULATOR_AS3722=y
+CONFIG_REGULATOR_BCM590XX=y
 CONFIG_REGULATOR_GPIO=y
 CONFIG_REGULATOR_MAX8907=y
 CONFIG_REGULATOR_PALMAS=y

arch/arm/mach-mvebu/Makefile

···
 obj-y				 += system-controller.o mvebu-soc-id.o
 
 ifeq ($(CONFIG_MACH_MVEBU_V7),y)
-obj-y				 += cpu-reset.o board-v7.o coherency.o coherency_ll.o pmsu.o
+obj-y				 += cpu-reset.o board-v7.o coherency.o coherency_ll.o pmsu.o pmsu_ll.o
 obj-$(CONFIG_SMP)		 += platsmp.o headsmp.o platsmp-a9.o headsmp-a9.o
 obj-$(CONFIG_HOTPLUG_CPU)	 += hotplug.o
 endif

arch/arm/mach-mvebu/board-v7.c

···
 #include <linux/mbus.h>
 #include <linux/signal.h>
 #include <linux/slab.h>
+#include <linux/irqchip.h>
 #include <asm/hardware/cache-l2x0.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
···
 	return 1;
 }
 
-static void __init mvebu_timer_and_clk_init(void)
+static void __init mvebu_init_irq(void)
 {
-	of_clk_init(NULL);
-	clocksource_of_init();
+	irqchip_init();
 	mvebu_scu_enable();
 	coherency_init();
 	BUG_ON(mvebu_mbus_dt_init(coherency_available()));
+}
 
-	if (of_machine_is_compatible("marvell,armada375"))
-		hook_fault_code(16 + 6, armada_375_external_abort_wa, SIGBUS, 0,
-				"imprecise external abort");
+static void __init external_abort_quirk(void)
+{
+	u32 dev, rev;
+
+	if (mvebu_get_soc_id(&dev, &rev) == 0 && rev > ARMADA_375_Z1_REV)
+		return;
+
+	hook_fault_code(16 + 6, armada_375_external_abort_wa, SIGBUS, 0,
+			"imprecise external abort");
 }
 
 static void __init i2c_quirk(void)
···
 {
 	if (of_machine_is_compatible("plathome,openblocks-ax3-4"))
 		i2c_quirk();
-	if (of_machine_is_compatible("marvell,a375-db"))
+	if (of_machine_is_compatible("marvell,a375-db")) {
+		external_abort_quirk();
 		thermal_quirk();
+	}
 
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
···
 	.l2c_aux_mask	= ~0,
 	.smp		= smp_ops(armada_xp_smp_ops),
 	.init_machine	= mvebu_dt_init,
-	.init_time	= mvebu_timer_and_clk_init,
+	.init_irq       = mvebu_init_irq,
 	.restart	= mvebu_restart,
 	.dt_compat	= armada_370_xp_dt_compat,
 MACHINE_END
···
 DT_MACHINE_START(ARMADA_375_DT, "Marvell Armada 375 (Device Tree)")
 	.l2c_aux_val	= 0,
 	.l2c_aux_mask	= ~0,
-	.init_time	= mvebu_timer_and_clk_init,
+	.init_irq       = mvebu_init_irq,
 	.init_machine	= mvebu_dt_init,
 	.restart	= mvebu_restart,
 	.dt_compat	= armada_375_dt_compat,
···
 DT_MACHINE_START(ARMADA_38X_DT, "Marvell Armada 380/385 (Device Tree)")
 	.l2c_aux_val	= 0,
 	.l2c_aux_mask	= ~0,
-	.init_time	= mvebu_timer_and_clk_init,
+	.init_irq       = mvebu_init_irq,
 	.restart	= mvebu_restart,
 	.dt_compat	= armada_38x_dt_compat,
 MACHINE_END

arch/arm/mach-mvebu/pmsu.c

···
 extern void ll_disable_coherency(void);
 extern void ll_enable_coherency(void);
 
+extern void armada_370_xp_cpu_resume(void);
+
 static struct platform_device armada_xp_cpuidle_device = {
 	.name = "cpuidle-armada-370-xp",
 };
···
 	reg = readl(pmsu_mp_base + L2C_NFABRIC_PM_CTL);
 	reg |= L2C_NFABRIC_PM_CTL_PWR_DOWN;
 	writel(reg, pmsu_mp_base + L2C_NFABRIC_PM_CTL);
-}
-
-static void armada_370_xp_cpu_resume(void)
-{
-	asm volatile("bl    ll_add_cpu_to_smp_group\n\t"
-		     "bl    ll_enable_coherency\n\t"
-		     "b	    cpu_resume\n\t");
 }
 
 /* No locking is needed because we only access per-CPU registers */

arch/arm/mach-mvebu/pmsu_ll.S

···
+/*
+ * Copyright (C) 2014 Marvell
+ *
+ * Thomas Petazzoni <[e-mail]>
+ * Gregory Clement <[e-mail]>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+/*
+ * This is the entry point through which CPUs exiting cpuidle deep
+ * idle state are going.
+ */
+ENTRY(armada_370_xp_cpu_resume)
+ARM_BE8(setend	be )			@ go BE8 if entered LE
+	bl	ll_add_cpu_to_smp_group
+	bl	ll_enable_coherency
+	b	cpu_resume
+ENDPROC(armada_370_xp_cpu_resume)
+

arch/arm/mach-omap2/Makefile

···
 obj-$(CONFIG_ARCH_OMAP2)		+= prm2xxx_3xxx.o prm2xxx.o cm2xxx.o
 obj-$(CONFIG_ARCH_OMAP3)		+= prm2xxx_3xxx.o prm3xxx.o cm3xxx.o
 obj-$(CONFIG_ARCH_OMAP3)		+= vc3xxx_data.o vp3xxx_data.o
-obj-$(CONFIG_SOC_AM33XX)		+= prm33xx.o cm33xx.o
 omap-prcm-4-5-common			=  cminst44xx.o cm44xx.o prm44xx.o \
 					   prcm_mpu44xx.o prminst44xx.o \
 					   vc44xx_data.o vp44xx_data.o
 obj-$(CONFIG_ARCH_OMAP4)		+= $(omap-prcm-4-5-common)
 obj-$(CONFIG_SOC_OMAP5)			+= $(omap-prcm-4-5-common)
 obj-$(CONFIG_SOC_DRA7XX)		+= $(omap-prcm-4-5-common)
-obj-$(CONFIG_SOC_AM43XX)		+= $(omap-prcm-4-5-common)
+am33xx-43xx-prcm-common			+= prm33xx.o cm33xx.o
+obj-$(CONFIG_SOC_AM33XX)		+= $(am33xx-43xx-prcm-common)
+obj-$(CONFIG_SOC_AM43XX)		+= $(omap-prcm-4-5-common) \
+					   $(am33xx-43xx-prcm-common)
 
 # OMAP voltage domains
 voltagedomain-common			:= voltage.o vc.o vp.o

arch/arm/mach-omap2/cm33xx.h

···
 void am33xx_cm_clkdm_force_sleep(u16 inst, u16 cdoffs);
 void am33xx_cm_clkdm_force_wakeup(u16 inst, u16 cdoffs);
 
-#ifdef CONFIG_SOC_AM33XX
+#if defined(CONFIG_SOC_AM33XX) || defined(CONFIG_SOC_AM43XX)
 extern int am33xx_cm_wait_module_idle(u16 inst, s16 cdoffs,
 					u16 clkctrl_offs);
 extern void am33xx_cm_module_enable(u8 mode, u16 inst, s16 cdoffs,

arch/arm/mach-omap2/common.h

···
 }
 #endif
 
-extern void __init gic_init_irq(void);
 extern void gic_dist_disable(void);
 extern void gic_dist_enable(void);
 extern bool gic_dist_disabled(void);

arch/arm/mach-omap2/id.c

···
 		}
 		break;
 
+	case 0xb9bc:
+		switch (rev) {
+		case 0:
+			omap_revision = DRA722_REV_ES1_0;
+			break;
+		default:
+			/* If we have no new revisions */
+			omap_revision = DRA722_REV_ES1_0;
+			break;
+		}
+		break;
+
 	default:
 		/* Unknown default to latest silicon rev as default*/
 		pr_warn("%s: unknown idcode=0x%08x (hawkeye=0x%08x,rev=0x%d)\n",

arch/arm/mach-omap2/mux.c

···
 		m0_entry = mux->muxnames[0];
 
 		/* First check for full name in mode0.muxmode format */
-		if (mode0_len && strncmp(muxname, m0_entry, mode0_len))
-			continue;
+		if (mode0_len)
+			if (strncmp(muxname, m0_entry, mode0_len) ||
+			    (strlen(m0_entry) != mode0_len))
+				continue;
 
 		/* Then check for muxmode only */
 		for (i = 0; i < OMAP_MUX_NR_MODES; i++) {

arch/arm/mach-omap2/omap4-common.c

···
 {}
 #endif
 
-void __init gic_init_irq(void)
-{
-	void __iomem *omap_irq_base;
-
-	/* Static mapping, never released */
-	gic_dist_base_addr = ioremap(OMAP44XX_GIC_DIST_BASE, SZ_4K);
-	BUG_ON(!gic_dist_base_addr);
-
-	twd_base = ioremap(OMAP44XX_LOCAL_TWD_BASE, SZ_4K);
-	BUG_ON(!twd_base);
-
-	/* Static mapping, never released */
-	omap_irq_base = ioremap(OMAP44XX_GIC_CPU_BASE, SZ_512);
-	BUG_ON(!omap_irq_base);
-
-	omap_wakeupgen_init();
-
-	gic_init(0, 29, gic_dist_base_addr, omap_irq_base);
-}
-
 void gic_dist_disable(void)
 {
 	if (gic_dist_base_addr)

arch/arm/mach-omap2/omap_hwmod.c

···
 		soc_ops.enable_module = _omap4_enable_module;
 		soc_ops.disable_module = _omap4_disable_module;
 		soc_ops.wait_target_ready = _omap4_wait_target_ready;
-		soc_ops.assert_hardreset = _omap4_assert_hardreset;
-		soc_ops.deassert_hardreset = _omap4_deassert_hardreset;
-		soc_ops.is_hardreset_asserted = _omap4_is_hardreset_asserted;
+		soc_ops.assert_hardreset = _am33xx_assert_hardreset;
+		soc_ops.deassert_hardreset = _am33xx_deassert_hardreset;
+		soc_ops.is_hardreset_asserted = _am33xx_is_hardreset_asserted;
 		soc_ops.init_clkdm = _init_clkdm;
 	} else if (soc_is_am33xx()) {
 		soc_ops.enable_module = _am33xx_enable_module;

arch/arm/mach-omap2/omap_hwmod_54xx_data.c

···
 	},
 };
 
+/*
+ * 'ocp2scp' class
+ * bridge to transform ocp interface protocol to scp (serial control port)
+ * protocol
+ */
+/* ocp2scp3 */
+static struct omap_hwmod omap54xx_ocp2scp3_hwmod;
+/* l4_cfg -> ocp2scp3 */
+static struct omap_hwmod_ocp_if omap54xx_l4_cfg__ocp2scp3 = {
+	.master		= &omap54xx_l4_cfg_hwmod,
+	.slave		= &omap54xx_ocp2scp3_hwmod,
+	.clk		= "l4_root_clk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod omap54xx_ocp2scp3_hwmod = {
+	.name		= "ocp2scp3",
+	.class		= &omap54xx_ocp2scp_hwmod_class,
+	.clkdm_name	= "l3init_clkdm",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = OMAP54XX_CM_L3INIT_OCP2SCP3_CLKCTRL_OFFSET,
+			.context_offs = OMAP54XX_RM_L3INIT_OCP2SCP3_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_HWCTRL,
+		},
+	},
+};
+
+/*
+ * 'sata' class
+ * sata:  serial ata interface  gen2 compliant   ( 1 rx/ 1 tx)
+ */
+
+static struct omap_hwmod_class_sysconfig omap54xx_sata_sysc = {
+	.sysc_offs	= 0x0000,
+	.sysc_flags	= (SYSC_HAS_MIDLEMODE | SYSC_HAS_SIDLEMODE),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+			   SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO |
+			   MSTANDBY_SMART | MSTANDBY_SMART_WKUP),
+	.sysc_fields	= &omap_hwmod_sysc_type2,
+};
+
+static struct omap_hwmod_class omap54xx_sata_hwmod_class = {
+	.name	= "sata",
+	.sysc	= &omap54xx_sata_sysc,
+};
+
+/* sata */
+static struct omap_hwmod omap54xx_sata_hwmod = {
+	.name		= "sata",
+	.class		= &omap54xx_sata_hwmod_class,
+	.clkdm_name	= "l3init_clkdm",
+	.flags		= HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY,
+	.main_clk	= "func_48m_fclk",
+	.mpu_rt_idx	= 1,
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = OMAP54XX_CM_L3INIT_SATA_CLKCTRL_OFFSET,
+			.context_offs = OMAP54XX_RM_L3INIT_SATA_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* l4_cfg -> sata */
+static struct omap_hwmod_ocp_if omap54xx_l4_cfg__sata = {
+	.master		= &omap54xx_l4_cfg_hwmod,
+	.slave		= &omap54xx_sata_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
 
 /*
  * Interfaces
···
 	&omap54xx_l4_cfg__usb_tll_hs,
 	&omap54xx_l4_cfg__usb_otg_ss,
 	&omap54xx_l4_wkup__wd_timer2,
+	&omap54xx_l4_cfg__ocp2scp3,
+	&omap54xx_l4_cfg__sata,
 	NULL,
 };
 

arch/arm/mach-omap2/soc.h

···
 #define DRA7XX_CLASS		0x07000000
 #define DRA752_REV_ES1_0	(DRA7XX_CLASS | (0x52 << 16) | (0x10 << 8))
 #define DRA752_REV_ES1_1	(DRA7XX_CLASS | (0x52 << 16) | (0x11 << 8))
+#define DRA722_REV_ES1_0	(DRA7XX_CLASS | (0x22 << 16) | (0x10 << 8))
 
 void omap2xxx_check_revision(void);
 void omap3xxx_check_revision(void);

arch/arm/mach-sunxi/sunxi.c

···
 
 #include <linux/clk-provider.h>
 #include <linux/clocksource.h>
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <linux/io.h>
+#include <linux/reboot.h>
 
 #include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/system_misc.h>
+
+#define SUN4I_WATCHDOG_CTRL_REG		0x00
+#define SUN4I_WATCHDOG_CTRL_RESTART		BIT(0)
+#define SUN4I_WATCHDOG_MODE_REG		0x04
+#define SUN4I_WATCHDOG_MODE_ENABLE		BIT(0)
+#define SUN4I_WATCHDOG_MODE_RESET_ENABLE	BIT(1)
+
+#define SUN6I_WATCHDOG1_IRQ_REG		0x00
+#define SUN6I_WATCHDOG1_CTRL_REG	0x10
+#define SUN6I_WATCHDOG1_CTRL_RESTART		BIT(0)
+#define SUN6I_WATCHDOG1_CONFIG_REG	0x14
+#define SUN6I_WATCHDOG1_CONFIG_RESTART		BIT(0)
+#define SUN6I_WATCHDOG1_CONFIG_IRQ		BIT(1)
+#define SUN6I_WATCHDOG1_MODE_REG	0x18
+#define SUN6I_WATCHDOG1_MODE_ENABLE		BIT(0)
+
+static void __iomem *wdt_base;
+
+static void sun4i_restart(enum reboot_mode mode, const char *cmd)
+{
+	if (!wdt_base)
+		return;
+
+	/* Enable timer and set reset bit in the watchdog */
+	writel(SUN4I_WATCHDOG_MODE_ENABLE | SUN4I_WATCHDOG_MODE_RESET_ENABLE,
+	       wdt_base + SUN4I_WATCHDOG_MODE_REG);
+
+	/*
+	 * Restart the watchdog. The default (and lowest) interval
+	 * value for the watchdog is 0.5s.
+	 */
+	writel(SUN4I_WATCHDOG_CTRL_RESTART, wdt_base + SUN4I_WATCHDOG_CTRL_REG);
+
+	while (1) {
+		mdelay(5);
+		writel(SUN4I_WATCHDOG_MODE_ENABLE | SUN4I_WATCHDOG_MODE_RESET_ENABLE,
+		       wdt_base + SUN4I_WATCHDOG_MODE_REG);
+	}
+}
+
+static struct of_device_id sunxi_restart_ids[] = {
+	{ .compatible = "allwinner,sun4i-a10-wdt" },
+	{ /*sentinel*/ }
+};
+
+static void sunxi_setup_restart(void)
+{
+	struct device_node *np;
+
+	np = of_find_matching_node(NULL, sunxi_restart_ids);
+	if (WARN(!np, "unable to setup watchdog restart"))
+		return;
+
+	wdt_base = of_iomap(np, 0);
+	WARN(!wdt_base, "failed to map watchdog base address");
+}
+
+static void __init sunxi_dt_init(void)
+{
+	sunxi_setup_restart();
+
+	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+}
 
 static const char * const sunxi_board_dt_compat[] = {
 	"allwinner,sun4i-a10",
···
 };
 
 DT_MACHINE_START(SUNXI_DT, "Allwinner A1X (Device Tree)")
+	.init_machine	= sunxi_dt_init,
 	.dt_compat	= sunxi_board_dt_compat,
+	.restart	= sun4i_restart,
 MACHINE_END
 
 static const char * const sun6i_board_dt_compat[] = {
···
 };
 
 DT_MACHINE_START(SUN7I_DT, "Allwinner sun7i (A20) Family")
+	.init_machine	= sunxi_dt_init,
 	.dt_compat	= sun7i_board_dt_compat,
+	.restart	= sun4i_restart,
 MACHINE_END