Merge tag 'amlogic-dt64-2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/dt

Pull "Amlogic 64-bit DT updates for v4.16, round 2" from Kevin Hilman:

This adds a few more basics (clock, pinctrl, PWM, reset) for the new AXG
family of Amlogic SoCs.

* tag 'amlogic-dt64-2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
arm64: dts: meson-axg: add new reset DT node
ARM64: dts: meson-axg: add PWM DT info for Meson-Axg SoC
ARM64: dts: meson-axg: add pinctrl DT info for Meson-AXG SoC
documentation: Add compatibles for Amlogic Meson AXG pin controllers
arm64: dts: meson-axg: add clock DT info for Meson AXG SoC

Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt

···
 		      "amlogic,meson-gxbb-aobus-pinctrl"
 		      "amlogic,meson-gxl-periphs-pinctrl"
 		      "amlogic,meson-gxl-aobus-pinctrl"
+		      "amlogic,meson-axg-periphs-pinctrl"
+		      "amlogic,meson-axg-aobus-pinctrl"
  - reg: address and size of registers controlling irq functionality
 
 === GPIO sub-nodes ===

arch/arm64/boot/dts/amlogic/meson-axg.dtsi

···
 			#size-cells = <2>;
 			ranges = <0x0 0x0 0x0 0xffd00000 0x0 0x25000>;
 
+			pwm_ab: pwm@1b000 {
+				compatible = "amlogic,meson-axg-ee-pwm";
+				reg = <0x0 0x1b000 0x0 0x20>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			pwm_cd: pwm@1a000 {
+				compatible = "amlogic,meson-axg-ee-pwm";
+				reg = <0x0 0x1a000 0x0 0x20>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			reset: reset-controller@1004 {
+				compatible = "amlogic,meson-axg-reset";
+				reg = <0x0 0x01004 0x0 0x9c>;
+				#reset-cells = <1>;
+			};
+
 			uart_A: serial@24000 {
 				compatible = "amlogic,meson-gx-uart", "amlogic,meson-uart";
 				reg = <0x0 0x24000 0x0 0x14>;
···
 			#address-cells = <0>;
 		};
 
+		hiubus: bus@ff63c000 {
+			compatible = "simple-bus";
+			reg = <0x0 0xff63c000 0x0 0x1c00>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x0 0x0 0xff63c000 0x0 0x1c00>;
+
+			clkc: clock-controller@0 {
+				compatible = "amlogic,axg-clkc";
+				#clock-cells = <1>;
+				reg = <0x0 0x0 0x0 0x320>;
+			};
+		};
+
 		mailbox: mailbox@ff63dc00 {
 			compatible = "amlogic,meson-gx-mhu", "amlogic,meson-gxbb-mhu";
 			reg = <0 0xff63dc00 0 0x400>;
···
 				     <GIC_SPI 209 IRQ_TYPE_EDGE_RISING>,
 				     <GIC_SPI 210 IRQ_TYPE_EDGE_RISING>;
 			#mbox-cells = <1>;
+		};
+
+		periphs: periphs@ff634000 {
+			compatible = "simple-bus";
+			reg = <0x0 0xff634000 0x0 0x2000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x0 0x0 0xff634000 0x0 0x2000>;
+
+			pinctrl_periphs: pinctrl@480 {
+				compatible = "amlogic,meson-axg-periphs-pinctrl";
+				#address-cells = <2>;
+				#size-cells = <2>;
+				ranges;
+
+				gpio: bank@480 {
+					reg = <0x0 0x00480 0x0 0x40>,
+						<0x0 0x004e8 0x0 0x14>,
+						<0x0 0x00520 0x0 0x14>,
+						<0x0 0x00430 0x0 0x3c>;
+					reg-names = "mux", "pull", "pull-enable", "gpio";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&pinctrl_periphs 0 0 86>;
+				};
+
+				pwm_a_a_pins: pwm_a_a {
+					mux {
+						groups = "pwm_a_a";
+						function = "pwm_a";
+					};
+				};
+
+				pwm_a_x18_pins: pwm_a_x18 {
+					mux {
+						groups = "pwm_a_x18";
+						function = "pwm_a";
+					};
+				};
+
+				pwm_a_x20_pins: pwm_a_x20 {
+					mux {
+						groups = "pwm_a_x20";
+						function = "pwm_a";
+					};
+				};
+
+				pwm_a_z_pins: pwm_a_z {
+					mux {
+						groups = "pwm_a_z";
+						function = "pwm_a";
+					};
+				};
+
+				pwm_b_a_pins: pwm_b_a {
+					mux {
+						groups = "pwm_b_a";
+						function = "pwm_b";
+					};
+				};
+
+				pwm_b_x_pins: pwm_b_x {
+					mux {
+						groups = "pwm_b_x";
+						function = "pwm_b";
+					};
+				};
+
+				pwm_b_z_pins: pwm_b_z {
+					mux {
+						groups = "pwm_b_z";
+						function = "pwm_b";
+					};
+				};
+
+				pwm_c_a_pins: pwm_c_a {
+					mux {
+						groups = "pwm_c_a";
+						function = "pwm_c";
+					};
+				};
+
+				pwm_c_x10_pins: pwm_c_x10 {
+					mux {
+						groups = "pwm_c_x10";
+						function = "pwm_c";
+					};
+				};
+
+				pwm_c_x17_pins: pwm_c_x17 {
+					mux {
+						groups = "pwm_c_x17";
+						function = "pwm_c";
+					};
+				};
+
+				pwm_d_x11_pins: pwm_d_x11 {
+					mux {
+						groups = "pwm_d_x11";
+						function = "pwm_d";
+					};
+				};
+
+				pwm_d_x16_pins: pwm_d_x16 {
+					mux {
+						groups = "pwm_d_x16";
+						function = "pwm_d";
+					};
+				};
+			};
 		};
 
 		sram: sram@fffc0000 {
···
 			#address-cells = <2>;
 			#size-cells = <2>;
 			ranges = <0x0 0x0 0x0 0xff800000 0x0 0x100000>;
+
+			pinctrl_aobus: pinctrl@14 {
+				compatible = "amlogic,meson-axg-aobus-pinctrl";
+				#address-cells = <2>;
+				#size-cells = <2>;
+				ranges;
+
+				gpio_ao: bank@14 {
+					reg = <0x0 0x00014 0x0 0x8>,
+						<0x0 0x0002c 0x0 0x4>,
+						<0x0 0x00024 0x0 0x8>;
+					reg-names = "mux", "pull", "gpio";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&pinctrl_aobus 0 0 15>;
+				};
+			};
+
+			pwm_AO_ab: pwm@7000 {
+				compatible = "amlogic,meson-axg-ao-pwm";
+				reg = <0x0 0x07000 0x0 0x20>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			pwm_AO_cd: pwm@2000 {
+				compatible = "amlogic,axg-ao-pwm";
+				reg = <0x0 0x02000  0x0 0x20>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
 
 			uart_AO: serial@3000 {
 				compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart";