Merge branch 'for-linus' of git://git.monstr.eu/linux-2.6-microblaze

* 'for-linus' of git://git.monstr.eu/linux-2.6-microblaze: (27 commits)
microblaze: entry.S use delay slot for return handlers
microblaze: Save current task directly
microblaze: Simplify entry.S - save/restore r3/r4 - ret_from_trap
microblaze: PCI early support for noMMU system
microblaze: Fix dma alloc and free coherent dma functions
microblaze: Add consistent code
microblaze: pgtable.h: move consistent functions
microblaze: Remove ancient Kconfig option for consistent mapping
microblaze: Remove VMALLOC_VMADDR
microblaze: Add define for ASM_LOOP
microblaze: Preliminary support for dma drivers
microblaze: remove trailing space in messages
microblaze: Use generic show_mem()
microblaze: Change temp register for cmdline
microblaze: Preliminary support for dma drivers
microblaze: Move cache function to cache.c
microblaze: Add support from PREEMPT
microblaze: Add support for Xilinx PCI host bridge
microblaze: Enable PCI, missing files
microblaze: Add core PCI files
...

arch/microblaze/Kconfig

···
 	select USB_ARCH_HAS_EHCI
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select HAVE_OPROFILE
+	select HAVE_DMA_ATTRS
+	select HAVE_DMA_API_DEBUG
 	select TRACING_SUPPORT
 
 config SWAP
···
 
 config PCI
 	def_bool n
-
-config NO_DMA
-	def_bool y
 
 config DTC
 	def_bool y
···
 
 config ADVANCED_OPTIONS
 	bool "Prompt for advanced kernel configuration options"
-	depends on MMU
 	help
 	  This option will enable prompting for a variety of advanced kernel
 	  configuration options.  These options can cause the kernel to not
···
 
 comment "Default settings for advanced configuration options are used"
 	depends on !ADVANCED_OPTIONS
+
+config XILINX_UNCACHED_SHADOW
+	bool "Are you using uncached shadow for RAM ?"
+	depends on ADVANCED_OPTIONS && !MMU
+	default n
+	help
+	  This is needed to be able to allocate uncachable memory regions.
+	  The feature requires the design to define the RAM memory controller
+	  window to be twice as large as the actual physical memory.
 
 config HIGHMEM_START_BOOL
 	bool "Set high memory pool address"
···
 
 config LOWMEM_SIZE_BOOL
 	bool "Set maximum low memory"
-	depends on ADVANCED_OPTIONS
+	depends on ADVANCED_OPTIONS && MMU
 	help
 	  This option allows you to set the maximum amount of memory which
 	  will be used as "low memory", that is, memory which the kernel can
···
 
 config LOWMEM_SIZE
 	hex "Maximum low memory size (in bytes)" if LOWMEM_SIZE_BOOL
-	depends on MMU
 	default "0x30000000"
 
 config KERNEL_START_BOOL
···
 
 config TASK_SIZE_BOOL
 	bool "Set custom user task size"
-	depends on ADVANCED_OPTIONS
+	depends on ADVANCED_OPTIONS && MMU
 	help
 	  This option allows you to set the amount of virtual address space
 	  allocated to user tasks.  This can be useful in optimizing the
···
 
 config TASK_SIZE
 	hex "Size of user task space" if TASK_SIZE_BOOL
-	depends on MMU
 	default "0x80000000"
-
-config CONSISTENT_START_BOOL
-	bool "Set custom consistent memory pool address"
-	depends on ADVANCED_OPTIONS && NOT_COHERENT_CACHE
-	help
-	  This option allows you to set the base virtual address
-	  of the the consistent memory pool.  This pool of virtual
-	  memory is used to make consistent memory allocations.
-
-config CONSISTENT_START
-	hex "Base virtual address of consistent memory pool" if CONSISTENT_START_BOOL
-	depends on MMU
-	default "0xff100000" if NOT_COHERENT_CACHE
-
-config CONSISTENT_SIZE_BOOL
-	bool "Set custom consistent memory pool size"
-	depends on ADVANCED_OPTIONS && NOT_COHERENT_CACHE
-	help
-	  This option allows you to set the size of the the
-	  consistent memory pool.  This pool of virtual memory
-	  is used to make consistent memory allocations.
-
-config CONSISTENT_SIZE
-	hex "Size of consistent memory pool" if CONSISTENT_SIZE_BOOL
-	depends on MMU
-	default "0x00200000" if NOT_COHERENT_CACHE
 
 endmenu
 
···
 menu "Exectuable file formats"
 
 source "fs/Kconfig.binfmt"
+
+endmenu
+
+menu "Bus Options"
+
+config PCI
+	bool "PCI support"
+
+config PCI_DOMAINS
+	def_bool PCI
+
+config PCI_SYSCALL
+	def_bool PCI
+
+config PCI_XILINX
+	bool "Xilinx PCI host bridge support"
+	depends on PCI
+
+source "drivers/pci/Kconfig"
 
 endmenu
 

arch/microblaze/Makefile

···
 core-y += arch/microblaze/kernel/
 core-y += arch/microblaze/mm/
 core-y += arch/microblaze/platform/
+core-$(CONFIG_PCI) += arch/microblaze/pci/
 
 drivers-$(CONFIG_OPROFILE) += arch/microblaze/oprofile/
 

arch/microblaze/include/asm/device.h

···
 struct dev_archdata {
 	/* Optional pointer to an OF device node */
 	struct device_node	*of_node;
+
+	/* DMA operations on that device */
+	struct dma_map_ops	*dma_ops;
+	void                    *dma_data;
 };
 
 struct pdev_archdata {

arch/microblaze/include/asm/dma-mapping.h

···
-#include <asm-generic/dma-mapping-broken.h>
+/*
+ * Implements the generic device dma API for microblaze and the pci
+ *
+ * Copyright (C) 2009-2010 Michal Simek <[e-mail]>
+ * Copyright (C) 2009-2010 PetaLogix
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * This file is base on powerpc and x86 dma-mapping.h versions
+ * Copyright (C) 2004 IBM
+ */
+
+#ifndef _ASM_MICROBLAZE_DMA_MAPPING_H
+#define _ASM_MICROBLAZE_DMA_MAPPING_H
+
+/*
+ * See Documentation/PCI/PCI-DMA-mapping.txt and
+ * Documentation/DMA-API.txt for documentation.
+ */
+
+#include <linux/types.h>
+#include <linux/cache.h>
+#include <linux/mm.h>
+#include <linux/scatterlist.h>
+#include <linux/dma-debug.h>
+#include <linux/dma-attrs.h>
+#include <asm/io.h>
+#include <asm-generic/dma-coherent.h>
+
+#define DMA_ERROR_CODE		(~(dma_addr_t)0x0)
+
+#define __dma_alloc_coherent(dev, gfp, size, handle)	NULL
+#define __dma_free_coherent(size, addr)		((void)0)
+#define __dma_sync(addr, size, rw)		((void)0)
+
+static inline unsigned long device_to_mask(struct device *dev)
+{
+	if (dev->dma_mask && *dev->dma_mask)
+		return *dev->dma_mask;
+	/* Assume devices without mask can take 32 bit addresses */
+	return 0xfffffffful;
+}
+
+extern struct dma_map_ops *dma_ops;
+
+/*
+ * Available generic sets of operations
+ */
+extern struct dma_map_ops dma_direct_ops;
+
+static inline struct dma_map_ops *get_dma_ops(struct device *dev)
+{
+	/* We don't handle the NULL dev case for ISA for now. We could
+	 * do it via an out of line call but it is not needed for now. The
+	 * only ISA DMA device we support is the floppy and we have a hack
+	 * in the floppy driver directly to get a device for us.
+	 */
+	if (unlikely(!dev) || !dev->archdata.dma_ops)
+		return NULL;
+
+	return dev->archdata.dma_ops;
+}
+
+static inline void set_dma_ops(struct device *dev, struct dma_map_ops *ops)
+{
+	dev->archdata.dma_ops = ops;
+}
+
+static inline int dma_supported(struct device *dev, u64 mask)
+{
+	struct dma_map_ops *ops = get_dma_ops(dev);
+
+	if (unlikely(!ops))
+		return 0;
+	if (!ops->dma_supported)
+		return 1;
+	return ops->dma_supported(dev, mask);
+}
+
+#ifdef CONFIG_PCI
+/* We have our own implementation of pci_set_dma_mask() */
+#define HAVE_ARCH_PCI_SET_DMA_MASK
+
+#endif
+
+static inline int dma_set_mask(struct device *dev, u64 dma_mask)
+{
+	struct dma_map_ops *ops = get_dma_ops(dev);
+
+	if (unlikely(ops == NULL))
+		return -EIO;
+	if (ops->set_dma_mask)
+		return ops->set_dma_mask(dev, dma_mask);
+	if (!dev->dma_mask || !dma_supported(dev, dma_mask))
+		return -EIO;
+	*dev->dma_mask = dma_mask;
+	return 0;
+}
+
+#include <asm-generic/dma-mapping-common.h>
+
+static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
+{
+	struct dma_map_ops *ops = get_dma_ops(dev);
+	if (ops->mapping_error)
+		return ops->mapping_error(dev, dma_addr);
+
+	return (dma_addr == DMA_ERROR_CODE);
+}
+
+#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
+#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
+#define dma_is_consistent(d, h)	(1)
+
+static inline void *dma_alloc_coherent(struct device *dev, size_t size,
+					dma_addr_t *dma_handle, gfp_t flag)
+{
+	struct dma_map_ops *ops = get_dma_ops(dev);
+	void *memory;
+
+	BUG_ON(!ops);
+
+	memory = ops->alloc_coherent(dev, size, dma_handle, flag);
+
+	debug_dma_alloc_coherent(dev, size, *dma_handle, memory);
+	return memory;
+}
+
+static inline void dma_free_coherent(struct device *dev, size_t size,
+				     void *cpu_addr, dma_addr_t dma_handle)
+{
+	struct dma_map_ops *ops = get_dma_ops(dev);
+
+	BUG_ON(!ops);
+	debug_dma_free_coherent(dev, size, cpu_addr, dma_handle);
+	ops->free_coherent(dev, size, cpu_addr, dma_handle);
+}
+
+static inline int dma_get_cache_alignment(void)
+{
+	return L1_CACHE_BYTES;
+}
+
+static inline void dma_cache_sync(struct device *dev, void *vaddr, size_t size,
+		enum dma_data_direction direction)
+{
+	BUG_ON(direction == DMA_NONE);
+	__dma_sync(vaddr, size, (int)direction);
+}
+
+#endif	/* _ASM_MICROBLAZE_DMA_MAPPING_H */

arch/microblaze/include/asm/io.h

···
 #include <asm/page.h>
 #include <linux/types.h>
 #include <linux/mm.h>          /* Get struct page {...} */
+#include <asm-generic/iomap.h>
 
+#ifndef CONFIG_PCI
+#define _IO_BASE	0
+#define _ISA_MEM_BASE	0
+#define PCI_DRAM_OFFSET	0
+#else
+#define _IO_BASE	isa_io_base
+#define _ISA_MEM_BASE	isa_mem_base
+#define PCI_DRAM_OFFSET	pci_dram_offset
+#endif
+
+extern unsigned long isa_io_base;
+extern unsigned long pci_io_base;
+extern unsigned long pci_dram_offset;
+
+extern resource_size_t isa_mem_base;
 
 #define IO_SPACE_LIMIT (0xFFFFFFFF)
 
···
 #define virt_to_phys(addr)	((unsigned long)__virt_to_phys(addr))
 #define virt_to_bus(addr)	((unsigned long)__virt_to_phys(addr))
 
-#define __page_address(page) \
-		(PAGE_OFFSET + (((page) - mem_map) << PAGE_SHIFT))
-#define page_to_phys(page)	virt_to_phys((void *)__page_address(page))
 #define page_to_bus(page)	(page_to_phys(page))
 #define bus_to_virt(addr)	(phys_to_virt(addr))
 
···
 #define out_8(a, v) __raw_writeb((v), (a))
 #define in_8(a) __raw_readb(a)
 
-/* FIXME */
-static inline void __iomem *ioport_map(unsigned long port, unsigned int len)
-{
-	return (void __iomem *) (port);
-}
-
-static inline void ioport_unmap(void __iomem *addr)
-{
-	/* Nothing to do */
-}
+#define ioport_map(port, nr)	((void __iomem *)(port))
+#define ioport_unmap(addr)
 
 #endif /* _ASM_MICROBLAZE_IO_H */

arch/microblaze/include/asm/irq.h

···
 
 #include <linux/interrupt.h>
 
+/* This type is the placeholder for a hardware interrupt number. It has to
+ * be big enough to enclose whatever representation is used by a given
+ * platform.
+ */
+typedef unsigned long irq_hw_number_t;
+
 extern unsigned int nr_irq;
 
 #define NO_IRQ (-1)
···
 struct pt_regs;
 extern void do_IRQ(struct pt_regs *regs);
 
-/* irq_of_parse_and_map - Parse and Map an interrupt into linux virq space
+/**
+ * irq_of_parse_and_map - Parse and Map an interrupt into linux virq space
  * @device: Device node of the device whose interrupt is to be mapped
  * @index: Index of the interrupt to map
  *
···
 {
 	return;
 }
+
+struct irq_host;
+
+/**
+ * irq_create_mapping - Map a hardware interrupt into linux virq space
+ * @host: host owning this hardware interrupt or NULL for default host
+ * @hwirq: hardware irq number in that host space
+ *
+ * Only one mapping per hardware interrupt is permitted. Returns a linux
+ * virq number.
+ * If the sense/trigger is to be specified, set_irq_type() should be called
+ * on the number returned from that call.
+ */
+extern unsigned int irq_create_mapping(struct irq_host *host,
+					irq_hw_number_t hwirq);
+
+/**
+ * irq_create_of_mapping - Map a hardware interrupt into linux virq space
+ * @controller: Device node of the interrupt controller
+ * @inspec: Interrupt specifier from the device-tree
+ * @intsize: Size of the interrupt specifier from the device-tree
+ *
+ * This function is identical to irq_create_mapping except that it takes
+ * as input informations straight from the device-tree (typically the results
+ * of the of_irq_map_*() functions.
+ */
+extern unsigned int irq_create_of_mapping(struct device_node *controller,
+					u32 *intspec, unsigned int intsize);
 
 #endif /* _ASM_MICROBLAZE_IRQ_H */

arch/microblaze/include/asm/page.h

···
 #define PAGE_OFFSET	CONFIG_KERNEL_START
 
 /*
- * MAP_NR -- given an address, calculate the index of the page struct which
- * points to the address's page.
- */
-#define MAP_NR(addr) (((unsigned long)(addr) - PAGE_OFFSET) >> PAGE_SHIFT)
-
-/*
  * The basic type of a PTE - 32 bit physical addressing.
  */
 typedef unsigned long pte_basic_t;
···
 # define pfn_to_virt(pfn)	__va(pfn_to_phys((pfn)))
 
 #  ifdef CONFIG_MMU
-#  define virt_to_page(kaddr) 	(mem_map +  MAP_NR(kaddr))
+
+#  define virt_to_page(kaddr)	(pfn_to_page(__pa(kaddr) >> PAGE_SHIFT))
+#  define page_to_virt(page)   __va(page_to_pfn(page) << PAGE_SHIFT)
+#  define page_to_phys(page)     (page_to_pfn(page) << PAGE_SHIFT)
+
 #  else /* CONFIG_MMU */
 #  define virt_to_page(vaddr)	(pfn_to_page(virt_to_pfn(vaddr)))
 #  define page_to_virt(page)	(pfn_to_virt(page_to_pfn(page)))

arch/microblaze/include/asm/pci-bridge.h

···
+#ifndef _ASM_MICROBLAZE_PCI_BRIDGE_H
+#define _ASM_MICROBLAZE_PCI_BRIDGE_H
+#ifdef __KERNEL__
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
 #include <linux/pci.h>
+#include <linux/list.h>
+#include <linux/ioport.h>
+
+struct device_node;
+
+enum {
+	/* Force re-assigning all resources (ignore firmware
+	 * setup completely)
+	 */
+	PCI_REASSIGN_ALL_RSRC	= 0x00000001,
+
+	/* Re-assign all bus numbers */
+	PCI_REASSIGN_ALL_BUS	= 0x00000002,
+
+	/* Do not try to assign, just use existing setup */
+	PCI_PROBE_ONLY		= 0x00000004,
+
+	/* Don't bother with ISA alignment unless the bridge has
+	 * ISA forwarding enabled
+	 */
+	PCI_CAN_SKIP_ISA_ALIGN	= 0x00000008,
+
+	/* Enable domain numbers in /proc */
+	PCI_ENABLE_PROC_DOMAINS	= 0x00000010,
+	/* ... except for domain 0 */
+	PCI_COMPAT_DOMAIN_0		= 0x00000020,
+};
+
+/*
+ * Structure of a PCI controller (host bridge)
+ */
+struct pci_controller {
+	struct pci_bus *bus;
+	char is_dynamic;
+	struct device_node *dn;
+	struct list_head list_node;
+	struct device *parent;
+
+	int first_busno;
+	int last_busno;
+
+	int self_busno;
+
+	void __iomem *io_base_virt;
+	resource_size_t io_base_phys;
+
+	resource_size_t pci_io_size;
+
+	/* Some machines (PReP) have a non 1:1 mapping of
+	 * the PCI memory space in the CPU bus space
+	 */
+	resource_size_t pci_mem_offset;
+
+	/* Some machines have a special region to forward the ISA
+	 * "memory" cycles such as VGA memory regions. Left to 0
+	 * if unsupported
+	 */
+	resource_size_t isa_mem_phys;
+	resource_size_t isa_mem_size;
+
+	struct pci_ops *ops;
+	unsigned int __iomem *cfg_addr;
+	void __iomem *cfg_data;
+
+	/*
+	 * Used for variants of PCI indirect handling and possible quirks:
+	 *  SET_CFG_TYPE - used on 4xx or any PHB that does explicit type0/1
+	 *  EXT_REG - provides access to PCI-e extended registers
+	 *  SURPRESS_PRIMARY_BUS - we surpress the setting of PCI_PRIMARY_BUS
+	 *   on Freescale PCI-e controllers since they used the PCI_PRIMARY_BUS
+	 *   to determine which bus number to match on when generating type0
+	 *   config cycles
+	 *  NO_PCIE_LINK - the Freescale PCI-e controllers have issues with
+	 *   hanging if we don't have link and try to do config cycles to
+	 *   anything but the PHB.  Only allow talking to the PHB if this is
+	 *   set.
+	 *  BIG_ENDIAN - cfg_addr is a big endian register
+	 *  BROKEN_MRM - the 440EPx/GRx chips have an errata that causes hangs
+	 *   on the PLB4.  Effectively disable MRM commands by setting this.
+	 */
+#define INDIRECT_TYPE_SET_CFG_TYPE		0x00000001
+#define INDIRECT_TYPE_EXT_REG		0x00000002
+#define INDIRECT_TYPE_SURPRESS_PRIMARY_BUS	0x00000004
+#define INDIRECT_TYPE_NO_PCIE_LINK		0x00000008
+#define INDIRECT_TYPE_BIG_ENDIAN		0x00000010
+#define INDIRECT_TYPE_BROKEN_MRM		0x00000020
+	u32 indirect_type;
+
+	/* Currently, we limit ourselves to 1 IO range and 3 mem
+	 * ranges since the common pci_bus structure can't handle more
+	 */
+	struct resource io_resource;
+	struct resource mem_resources[3];
+	int global_number;	/* PCI domain number */
+};
+
+static inline struct pci_controller *pci_bus_to_host(const struct pci_bus *bus)
+{
+	return bus->sysdata;
+}
+
+static inline int isa_vaddr_is_ioport(void __iomem *address)
+{
+	/* No specific ISA handling on ppc32 at this stage, it
+	 * all goes through PCI
+	 */
+	return 0;
+}
+
+/* These are used for config access before all the PCI probing
+   has been done. */
+extern int early_read_config_byte(struct pci_controller *hose, int bus,
+			int dev_fn, int where, u8 *val);
+extern int early_read_config_word(struct pci_controller *hose, int bus,
+			int dev_fn, int where, u16 *val);
+extern int early_read_config_dword(struct pci_controller *hose, int bus,
+			int dev_fn, int where, u32 *val);
+extern int early_write_config_byte(struct pci_controller *hose, int bus,
+			int dev_fn, int where, u8 val);
+extern int early_write_config_word(struct pci_controller *hose, int bus,
+			int dev_fn, int where, u16 val);
+extern int early_write_config_dword(struct pci_controller *hose, int bus,
+			int dev_fn, int where, u32 val);
+
+extern int early_find_capability(struct pci_controller *hose, int bus,
+				 int dev_fn, int cap);
+
+extern void setup_indirect_pci(struct pci_controller *hose,
+			       resource_size_t cfg_addr,
+			       resource_size_t cfg_data, u32 flags);
+
+/* Get the PCI host controller for an OF device */
+extern struct pci_controller *pci_find_hose_for_OF_device(
+			struct device_node *node);
+
+/* Fill up host controller resources from the OF node */
+extern void pci_process_bridge_OF_ranges(struct pci_controller *hose,
+			struct device_node *dev, int primary);
+
+/* Allocate & free a PCI host bridge structure */
+extern struct pci_controller *pcibios_alloc_controller(struct device_node *dev);
+extern void pcibios_free_controller(struct pci_controller *phb);
+extern void pcibios_setup_phb_resources(struct pci_controller *hose);
+
+#ifdef CONFIG_PCI
+extern unsigned int pci_flags;
+
+static inline void pci_set_flags(int flags)
+{
+	pci_flags = flags;
+}
+
+static inline void pci_add_flags(int flags)
+{
+	pci_flags |= flags;
+}
+
+static inline int pci_has_flag(int flag)
+{
+	return pci_flags & flag;
+}
+
+extern struct list_head hose_list;
+
+extern unsigned long pci_address_to_pio(phys_addr_t address);
+extern int pcibios_vaddr_is_ioport(void __iomem *address);
+#else
+static inline unsigned long pci_address_to_pio(phys_addr_t address)
+{
+	return (unsigned long)-1;
+}
+static inline int pcibios_vaddr_is_ioport(void __iomem *address)
+{
+	return 0;
+}
+
+static inline void pci_set_flags(int flags) { }
+static inline void pci_add_flags(int flags) { }
+static inline int pci_has_flag(int flag)
+{
+	return 0;
+}
+#endif	/* CONFIG_PCI */
+
+#endif	/* __KERNEL__ */
+#endif	/* _ASM_MICROBLAZE_PCI_BRIDGE_H */

arch/microblaze/include/asm/pci.h

···
-#include <asm-generic/pci.h>
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * Based on powerpc version
+ */
+
+#ifndef __ASM_MICROBLAZE_PCI_H
+#define __ASM_MICROBLAZE_PCI_H
+#ifdef __KERNEL__
+
+#include <linux/types.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/dma-mapping.h>
+#include <linux/pci.h>
+
+#include <asm/scatterlist.h>
+#include <asm/io.h>
+#include <asm/prom.h>
+#include <asm/pci-bridge.h>
+
+#define PCIBIOS_MIN_IO		0x1000
+#define PCIBIOS_MIN_MEM		0x10000000
+
+struct pci_dev;
+
+/* Values for the `which' argument to sys_pciconfig_iobase syscall.  */
+#define IOBASE_BRIDGE_NUMBER	0
+#define IOBASE_MEMORY		1
+#define IOBASE_IO		2
+#define IOBASE_ISA_IO		3
+#define IOBASE_ISA_MEM		4
+
+#define pcibios_scan_all_fns(a, b)	0
+
+/*
+ * Set this to 1 if you want the kernel to re-assign all PCI
+ * bus numbers (don't do that on ppc64 yet !)
+ */
+#define pcibios_assign_all_busses() \
+	(pci_has_flag(PCI_REASSIGN_ALL_BUS))
+
+static inline void pcibios_set_master(struct pci_dev *dev)
+{
+	/* No special bus mastering setup handling */
+}
+
+static inline void pcibios_penalize_isa_irq(int irq, int active)
+{
+	/* We don't do dynamic PCI IRQ allocation */
+}
+
+#ifdef CONFIG_PCI
+extern void set_pci_dma_ops(struct dma_map_ops *dma_ops);
+extern struct dma_map_ops *get_pci_dma_ops(void);
+#else	/* CONFIG_PCI */
+#define set_pci_dma_ops(d)
+#define get_pci_dma_ops()	NULL
+#endif
+
+#ifdef CONFIG_PCI
+static inline void pci_dma_burst_advice(struct pci_dev *pdev,
+					enum pci_dma_burst_strategy *strat,
+					unsigned long *strategy_parameter)
+{
+	*strat = PCI_DMA_BURST_INFINITY;
+	*strategy_parameter = ~0UL;
+}
+#endif
+
+extern int pci_domain_nr(struct pci_bus *bus);
+
+/* Decide whether to display the domain number in /proc */
+extern int pci_proc_domain(struct pci_bus *bus);
+
+struct vm_area_struct;
+/* Map a range of PCI memory or I/O space for a device into user space */
+int pci_mmap_page_range(struct pci_dev *pdev, struct vm_area_struct *vma,
+			enum pci_mmap_state mmap_state, int write_combine);
+
+/* Tell drivers/pci/proc.c that we have pci_mmap_page_range() */
+#define HAVE_PCI_MMAP	1
+
+extern int pci_legacy_read(struct pci_bus *bus, loff_t port, u32 *val,
+			   size_t count);
+extern int pci_legacy_write(struct pci_bus *bus, loff_t port, u32 val,
+			   size_t count);
+extern int pci_mmap_legacy_page_range(struct pci_bus *bus,
+				      struct vm_area_struct *vma,
+				      enum pci_mmap_state mmap_state);
+
+#define HAVE_PCI_LEGACY	1
+
+/* pci_unmap_{page,single} is a nop so... */
+#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)
+#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)
+#define pci_unmap_addr(PTR, ADDR_NAME)		(0)
+#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)	do { } while (0)
+#define pci_unmap_len(PTR, LEN_NAME)		(0)
+#define pci_unmap_len_set(PTR, LEN_NAME, VAL)	do { } while (0)
+
+/* The PCI address space does equal the physical memory
+ * address space (no IOMMU).  The IDE and SCSI device layers use
+ * this boolean for bounce buffer decisions.
+ */
+#define PCI_DMA_BUS_IS_PHYS     (1)
+
+extern void pcibios_resource_to_bus(struct pci_dev *dev,
+			struct pci_bus_region *region,
+			struct resource *res);
+
+extern void pcibios_bus_to_resource(struct pci_dev *dev,
+			struct resource *res,
+			struct pci_bus_region *region);
+
+static inline struct resource *pcibios_select_root(struct pci_dev *pdev,
+			struct resource *res)
+{
+	struct resource *root = NULL;
+
+	if (res->flags & IORESOURCE_IO)
+		root = &ioport_resource;
+	if (res->flags & IORESOURCE_MEM)
+		root = &iomem_resource;
+
+	return root;
+}
+
+extern void pcibios_claim_one_bus(struct pci_bus *b);
+
+extern void pcibios_finish_adding_to_bus(struct pci_bus *bus);
+
+extern void pcibios_resource_survey(void);
+
+extern struct pci_controller *init_phb_dynamic(struct device_node *dn);
+extern int remove_phb_dynamic(struct pci_controller *phb);
+
+extern struct pci_dev *of_create_pci_dev(struct device_node *node,
+					struct pci_bus *bus, int devfn);
+
+extern void of_scan_pci_bridge(struct device_node *node,
+				struct pci_dev *dev);
+
+extern void of_scan_bus(struct device_node *node, struct pci_bus *bus);
+extern void of_rescan_bus(struct device_node *node, struct pci_bus *bus);
+
+extern int pci_read_irq_line(struct pci_dev *dev);
+
+extern int pci_bus_find_capability(struct pci_bus *bus,
+						unsigned int devfn, int cap);
+
+struct file;
+extern pgprot_t	pci_phys_mem_access_prot(struct file *file,
+					 unsigned long pfn,
+					 unsigned long size,
+					 pgprot_t prot);
+
+#define HAVE_ARCH_PCI_RESOURCE_TO_USER
+extern void pci_resource_to_user(const struct pci_dev *dev, int bar,
+				 const struct resource *rsrc,
+				 resource_size_t *start, resource_size_t *end);
+
+extern void pcibios_setup_bus_devices(struct pci_bus *bus);
+extern void pcibios_setup_bus_self(struct pci_bus *bus);
+
+/* This part of code was originaly in xilinx-pci.h */
+#ifdef CONFIG_PCI_XILINX
+extern void __init xilinx_pci_init(void);
+#else
+static inline void __init xilinx_pci_init(void) { return; }
+#endif
+
+#endif	/* __KERNEL__ */
+#endif /* __ASM_MICROBLAZE_PCI_H */

arch/microblaze/include/asm/pgalloc.h

···
 #include <asm/io.h>
 #include <asm/page.h>
 #include <asm/cache.h>
+#include <asm/pgtable.h>
 
 #define PGDIR_ORDER	0
 
···
 		unsigned long address)
 {
 	pte_t *pte;
-	extern int mem_init_done;
 	extern void *early_get_page(void);
 	if (mem_init_done) {
 		pte = (pte_t *)__get_free_page(GFP_KERNEL |

arch/microblaze/include/asm/pgtable.h

···
 #define io_remap_pfn_range(vma, vaddr, pfn, size, prot)		\
 		remap_pfn_range(vma, vaddr, pfn, size, prot)
 
+#ifndef __ASSEMBLY__
+extern int mem_init_done;
+#endif
+
 #ifndef CONFIG_MMU
 
 #define pgd_present(pgd)	(1) /* pages are always present on non MMU */
···
 
 #define arch_enter_lazy_cpu_mode()	do {} while (0)
 
+#define pgprot_noncached_wc(prot)	prot
+
 #else /* CONFIG_MMU */
 
 #include <asm-generic/4level-fixup.h>
···
 
 extern unsigned long va_to_phys(unsigned long address);
 extern pte_t *va_to_pte(unsigned long address);
-extern unsigned long ioremap_bot, ioremap_base;
 
 /*
  * The following only work if pte_present() is true.
···
 #define VMALLOC_START	(CONFIG_KERNEL_START + \
 				max(32 * 1024 * 1024UL, memory_size))
 #define VMALLOC_END	ioremap_bot
-#define VMALLOC_VMADDR(x) ((unsigned long)(x))
 
 #endif /* __ASSEMBLY__ */
+
+/*
+ * Macro to mark a page protection value as "uncacheable".
+ */
+
+#define _PAGE_CACHE_CTL	(_PAGE_GUARDED | _PAGE_NO_CACHE | \
+							_PAGE_WRITETHRU)
+
+#define pgprot_noncached(prot) \
+			(__pgprot((pgprot_val(prot) & ~_PAGE_CACHE_CTL) | \
+					_PAGE_NO_CACHE | _PAGE_GUARDED))
+
+#define pgprot_noncached_wc(prot) \
+			 (__pgprot((pgprot_val(prot) & ~_PAGE_CACHE_CTL) | \
+							_PAGE_NO_CACHE))
 
 /*
  * The MicroBlaze MMU is identical to the PPC-40x MMU, and uses a hash
···
 	mts     rmsr, %2\n\
 	nop"
 	: "=&r" (old), "=&r" (tmp), "=&r" (msr), "=m" (*p)
-	: "r" ((unsigned long)(p+1) - 4), "r" (clr), "r" (set), "m" (*p)
+	: "r" ((unsigned long)(p + 1) - 4), "r" (clr), "r" (set), "m" (*p)
 	: "cc");
 
 	return old;
···
 int map_page(unsigned long va, phys_addr_t pa, int flags);
 
 extern int mem_init_done;
-extern unsigned long ioremap_base;
-extern unsigned long ioremap_bot;
 
 asmlinkage void __init mmu_init(void);
 
 void __init *early_get_page(void);
 
-void *consistent_alloc(int gfp, size_t size, dma_addr_t *dma_handle);
-void consistent_free(void *vaddr);
-void consistent_sync(void *vaddr, size_t size, int direction);
-void consistent_sync_page(struct page *page, unsigned long offset,
-	size_t size, int direction);
 #endif /* __ASSEMBLY__ */
 #endif /* __KERNEL__ */
 
···
 
 #ifndef __ASSEMBLY__
 #include <asm-generic/pgtable.h>
+
+extern unsigned long ioremap_bot, ioremap_base;
+
+void *consistent_alloc(int gfp, size_t size, dma_addr_t *dma_handle);
+void consistent_free(void *vaddr);
+void consistent_sync(void *vaddr, size_t size, int direction);
+void consistent_sync_page(struct page *page, unsigned long offset,
+	size_t size, int direction);
 
 void setup_memory(void);
 #endif /* __ASSEMBLY__ */

arch/microblaze/include/asm/prom.h

···
 /* Other Prototypes */
 extern int early_uartlite_console(void);
 
+#ifdef CONFIG_PCI
+/*
+ * PCI <-> OF matching functions
+ * (XXX should these be here?)
+ */
+struct pci_bus;
+struct pci_dev;
+extern int pci_device_from_OF_node(struct device_node *node,
+					u8 *bus, u8 *devfn);
+extern struct device_node *pci_busdev_to_OF_node(struct pci_bus *bus,
+							int devfn);
+extern struct device_node *pci_device_to_OF_node(struct pci_dev *dev);
+extern void pci_create_OF_bus_map(void);
+#endif
+
 /*
  * OF address retreival & translation
  */

arch/microblaze/include/asm/system.h

···
 extern char *klimit;
 extern void ret_from_fork(void);
 
+extern void *alloc_maybe_bootmem(size_t size, gfp_t mask);
+extern void *zalloc_maybe_bootmem(size_t size, gfp_t mask);
+
 #ifdef CONFIG_DEBUG_FS
 extern struct dentry *of_debugfs_root;
 #endif

arch/microblaze/include/asm/tlbflush.h

···
 extern void _tlbie(unsigned long address);
 extern void _tlbia(void);
 
-#define __tlbia()	_tlbia()
+#define __tlbia()	{ preempt_disable(); _tlbia(); preempt_enable(); }
 
 static inline void local_flush_tlb_all(void)
 	{ __tlbia(); }

arch/microblaze/kernel/Makefile

···
 
 extra-y := head.o vmlinux.lds
 
-obj-y += exceptions.o \
+obj-y += dma.o exceptions.o \
 	hw_exception_handler.o init_task.o intc.o irq.o of_device.o \
 	of_platform.o process.o prom.o prom_parse.o ptrace.o \
 	setup.o signal.o sys_microblaze.o timer.o traps.o reset.o

arch/microblaze/kernel/asm-offsets.c

···
 	DEFINE(TI_FLAGS, offsetof(struct thread_info, flags));
 	DEFINE(TI_ADDR_LIMIT, offsetof(struct thread_info, addr_limit));
 	DEFINE(TI_CPU_CONTEXT, offsetof(struct thread_info, cpu_context));
+	DEFINE(TI_PREEMPT_COUNT, offsetof(struct thread_info, preempt_count));
 	BLANK();
 
 	/* struct cpu_context */

arch/microblaze/kernel/cpu/cache.c

···
 #include <asm/cpuinfo.h>
 #include <asm/pvr.h>
 
-static inline void __invalidate_flush_icache(unsigned int addr)
-{
-	__asm__ __volatile__ ("wic	%0, r0;"	\
-					: : "r" (addr));
-}
-
-static inline void __flush_dcache(unsigned int addr)
-{
-	__asm__ __volatile__ ("wdc.flush	%0, r0;"	\
-					: : "r" (addr));
-}
-
-static inline void __invalidate_dcache(unsigned int baseaddr,
-						unsigned int offset)
-{
-	__asm__ __volatile__ ("wdc.clear	%0, %1;"	\
-					: : "r" (baseaddr), "r" (offset));
-}
-
 static inline void __enable_icache_msr(void)
 {
 	__asm__ __volatile__ ("	msrset	r0, %0;		\
···
 	int step = -line_length;					\
 	BUG_ON(step >= 0);						\
 									\
-	__asm__ __volatile__ (" 1:      " #op " r0, %0;			\
-					bgtid   %0, 1b;			\
-					addk    %0, %0, %1;		\
+	__asm__ __volatile__ (" 1:	" #op "	r0, %0;			\
+					bgtid	%0, 1b;			\
+					addk	%0, %0, %1;		\
 					" : : "r" (len), "r" (step)	\
 					: "memory");			\
 } while (0);
···
 	int count = end - start;					\
 	BUG_ON(count <= 0);						\
 									\
-	__asm__ __volatile__ (" 1:	" #op " %0, %1;			\
-					bgtid   %1, 1b;			\
-					addk    %1, %1, %2;		\
+	__asm__ __volatile__ (" 1:	" #op "	%0, %1;			\
+					bgtid	%1, 1b;			\
+					addk	%1, %1, %2;		\
 					" : : "r" (start), "r" (count),	\
 					"r" (step) : "memory");		\
 } while (0);
···
 	int volatile temp;						\
 	BUG_ON(end - start <= 0);					\
 									\
-	__asm__ __volatile__ (" 1:	" #op " %1, r0;			\
+	__asm__ __volatile__ (" 1:	" #op "	%1, r0;			\
 					cmpu	%0, %1, %2;		\
 					bgtid	%0, 1b;			\
 					addk	%1, %1, %3;		\
···
 					"r" (line_length) : "memory");	\
 } while (0);
 
+#define ASM_LOOP
+
 static void __flush_icache_range_msr_irq(unsigned long start, unsigned long end)
 {
 	unsigned long flags;
-
+#ifndef ASM_LOOP
+	int i;
+#endif
 	pr_debug("%s: start 0x%x, end 0x%x\n", __func__,
 				(unsigned int)start, (unsigned int) end);
 
···
 	local_irq_save(flags);
 	__disable_icache_msr();
 
+#ifdef ASM_LOOP
 	CACHE_RANGE_LOOP_1(start, end, cpuinfo.icache_line_length, wic);
-
+#else
+	for (i = start; i < end; i += cpuinfo.icache_line_length)
+		__asm__ __volatile__ ("wic	%0, r0;"	\
+				: : "r" (i));
+#endif
 	__enable_icache_msr();
 	local_irq_restore(flags);
 }
···
 				unsigned long end)
 {
 	unsigned long flags;
-
+#ifndef ASM_LOOP
+	int i;
+#endif
 	pr_debug("%s: start 0x%x, end 0x%x\n", __func__,
 				(unsigned int)start, (unsigned int) end);
 
···
 	local_irq_save(flags);
 	__disable_icache_nomsr();
 
+#ifdef ASM_LOOP
 	CACHE_RANGE_LOOP_1(start, end, cpuinfo.icache_line_length, wic);
+#else
+	for (i = start; i < end; i += cpuinfo.icache_line_length)
+		__asm__ __volatile__ ("wic	%0, r0;"	\
+				: : "r" (i));
+#endif
 
 	__enable_icache_nomsr();
 	local_irq_restore(flags);
···
 static void __flush_icache_range_noirq(unsigned long start,
 				unsigned long end)
 {
+#ifndef ASM_LOOP
+	int i;
+#endif
 	pr_debug("%s: start 0x%x, end 0x%x\n", __func__,
 				(unsigned int)start, (unsigned int) end);
 
 	CACHE_LOOP_LIMITS(start, end,
 			cpuinfo.icache_line_length, cpuinfo.icache_size);
+#ifdef ASM_LOOP
 	CACHE_RANGE_LOOP_1(start, end, cpuinfo.icache_line_length, wic);
+#else
+	for (i = start; i < end; i += cpuinfo.icache_line_length)
+		__asm__ __volatile__ ("wic	%0, r0;"	\
+				: : "r" (i));
+#endif
 }
 
 static void __flush_icache_all_msr_irq(void)
 {
 	unsigned long flags;
-
+#ifndef ASM_LOOP
+	int i;
+#endif
 	pr_debug("%s\n", __func__);
 
 	local_irq_save(flags);
 	__disable_icache_msr();
-
+#ifdef ASM_LOOP
 	CACHE_ALL_LOOP(cpuinfo.icache_size, cpuinfo.icache_line_length, wic);
-
+#else
+	for (i = 0; i < cpuinfo.icache_size;
+		 i += cpuinfo.icache_line_length)
+			__asm__ __volatile__ ("wic	%0, r0;" \
+					: : "r" (i));
+#endif
 	__enable_icache_msr();
 	local_irq_restore(flags);
 }
···
 static void __flush_icache_all_nomsr_irq(void)
 {
 	unsigned long flags;
-
+#ifndef ASM_LOOP
+	int i;
+#endif
 	pr_debug("%s\n", __func__);
 
 	local_irq_save(flags);
 	__disable_icache_nomsr();
-
+#ifdef ASM_LOOP
 	CACHE_ALL_LOOP(cpuinfo.icache_size, cpuinfo.icache_line_length, wic);
-
+#else
+	for (i = 0; i < cpuinfo.icache_size;
+		 i += cpuinfo.icache_line_length)
+			__asm__ __volatile__ ("wic	%0, r0;" \
+					: : "r" (i));
+#endif
 	__enable_icache_nomsr();
 	local_irq_restore(flags);
 }
 
 static void __flush_icache_all_noirq(void)
 {
+#ifndef ASM_LOOP
+	int i;
+#endif
 	pr_debug("%s\n", __func__);
+#ifdef ASM_LOOP
 	CACHE_ALL_LOOP(cpuinfo.icache_size, cpuinfo.icache_line_length, wic);
+#else
+	for (i = 0; i < cpuinfo.icache_size;
+		 i += cpuinfo.icache_line_length)
+			__asm__ __volatile__ ("wic	%0, r0;" \
+					: : "r" (i));
+#endif
 }
 
 static void __invalidate_dcache_all_msr_irq(void)
 {
 	unsigned long flags;
-
+#ifndef ASM_LOOP
+	int i;
+#endif
 	pr_debug("%s\n", __func__);
 
 	local_irq_save(flags);
 	__disable_dcache_msr();
-
+#ifdef ASM_LOOP
 	CACHE_ALL_LOOP(cpuinfo.dcache_size, cpuinfo.dcache_line_length, wdc);
-
+#else
+	for (i = 0; i < cpuinfo.dcache_size;
+		 i += cpuinfo.dcache_line_length)
+			__asm__ __volatile__ ("wdc	%0, r0;" \
+					: : "r" (i));
+#endif
 	__enable_dcache_msr();
 	local_irq_restore(flags);
 }
···
 static void __invalidate_dcache_all_nomsr_irq(void)
 {
 	unsigned long flags;
-
+#ifndef ASM_LOOP
+	int i;
+#endif
 	pr_debug("%s\n", __func__);
 
 	local_irq_save(flags);
 	__disable_dcache_nomsr();
-
+#ifdef ASM_LOOP
 	CACHE_ALL_LOOP(cpuinfo.dcache_size, cpuinfo.dcache_line_length, wdc);
-
+#else
+	for (i = 0; i < cpuinfo.dcache_size;
+		 i += cpuinfo.dcache_line_length)
+			__asm__ __volatile__ ("wdc	%0, r0;" \
+					: : "r" (i));
+#endif
 	__enable_dcache_nomsr();
 	local_irq_restore(flags);
 }
 
 static void __invalidate_dcache_all_noirq_wt(void)
 {
+#ifndef ASM_LOOP
+	int i;
+#endif
 	pr_debug("%s\n", __func__);
+#ifdef ASM_LOOP
 	CACHE_ALL_LOOP(cpuinfo.dcache_size, cpuinfo.dcache_line_length, wdc)
+#else
+	for (i = 0; i < cpuinfo.dcache_size;
+		 i += cpuinfo.dcache_line_length)
+			__asm__ __volatile__ ("wdc	%0, r0;" \
+					: : "r" (i));
+#endif
 }
 
 /* FIXME this is weird - should be only wdc but not work
  * MS: I am getting bus errors and other weird things */
 static void __invalidate_dcache_all_wb(void)
 {
+#ifndef ASM_LOOP
+	int i;
+#endif
 	pr_debug("%s\n", __func__);
+#ifdef ASM_LOOP
 	CACHE_ALL_LOOP2(cpuinfo.dcache_size, cpuinfo.dcache_line_length,
 					wdc.clear)
+#else
+	for (i = 0; i < cpuinfo.dcache_size;
+		 i += cpuinfo.dcache_line_length)
+			__asm__ __volatile__ ("wdc.clear	%0, r0;" \
+					: : "r" (i));
+#endif
 }
 
 static void __invalidate_dcache_range_wb(unsigned long start,
 						unsigned long end)
 {
+#ifndef ASM_LOOP
+	int i;
+#endif
 	pr_debug("%s: start 0x%x, end 0x%x\n", __func__,
 				(unsigned int)start, (unsigned int) end);
 
 	CACHE_LOOP_LIMITS(start, end,
 			cpuinfo.dcache_line_length, cpuinfo.dcache_size);
+#ifdef ASM_LOOP
 	CACHE_RANGE_LOOP_2(start, end, cpuinfo.dcache_line_length, wdc.clear);
+#else
+	for (i = start; i < end; i += cpuinfo.icache_line_length)
+		__asm__ __volatile__ ("wdc.clear	%0, r0;"	\
+				: : "r" (i));
+#endif
 }
 
 static void __invalidate_dcache_range_nomsr_wt(unsigned long start,
 							unsigned long end)
 {
+#ifndef ASM_LOOP
+	int i;
+#endif
 	pr_debug("%s: start 0x%x, end 0x%x\n", __func__,
 				(unsigned int)start, (unsigned int) end);
 	CACHE_LOOP_LIMITS(start, end,
 			cpuinfo.dcache_line_length, cpuinfo.dcache_size);
 
+#ifdef ASM_LOOP
 	CACHE_RANGE_LOOP_1(start, end, cpuinfo.dcache_line_length, wdc);
+#else
+	for (i = start; i < end; i += cpuinfo.icache_line_length)
+		__asm__ __volatile__ ("wdc	%0, r0;"	\
+				: : "r" (i));
+#endif
 }
 
 static void __invalidate_dcache_range_msr_irq_wt(unsigned long start,
 							unsigned long end)
 {
 	unsigned long flags;
-
+#ifndef ASM_LOOP
+	int i;
+#endif
 	pr_debug("%s: start 0x%x, end 0x%x\n", __func__,
 				(unsigned int)start, (unsigned int) end);
 	CACHE_LOOP_LIMITS(start, end,
···
 	local_irq_save(flags);
 	__disable_dcache_msr();
 
+#ifdef ASM_LOOP
 	CACHE_RANGE_LOOP_1(start, end, cpuinfo.dcache_line_length, wdc);
+#else
+	for (i = start; i < end; i += cpuinfo.icache_line_length)
+		__asm__ __volatile__ ("wdc	%0, r0;"	\
+				: : "r" (i));
+#endif
 
 	__enable_dcache_msr();
 	local_irq_restore(flags);
···
 							unsigned long end)
 {
 	unsigned long flags;
-
+#ifndef ASM_LOOP
+	int i;
+#endif
 	pr_debug("%s: start 0x%x, end 0x%x\n", __func__,
 				(unsigned int)start, (unsigned int) end);
 
···
 	local_irq_save(flags);
 	__disable_dcache_nomsr();
 
+#ifdef ASM_LOOP
 	CACHE_RANGE_LOOP_1(start, end, cpuinfo.dcache_line_length, wdc);
+#else
+	for (i = start; i < end; i += cpuinfo.icache_line_length)
+		__asm__ __volatile__ ("wdc	%0, r0;"	\
+				: : "r" (i));
+#endif
 
 	__enable_dcache_nomsr();
 	local_irq_restore(flags);
···
 
 static void __flush_dcache_all_wb(void)
 {
+#ifndef ASM_LOOP
+	int i;
+#endif
 	pr_debug("%s\n", __func__);
+#ifdef ASM_LOOP
 	CACHE_ALL_LOOP(cpuinfo.dcache_size, cpuinfo.dcache_line_length,
 				wdc.flush);
+#else
+	for (i = 0; i < cpuinfo.dcache_size;
+		 i += cpuinfo.dcache_line_length)
+			__asm__ __volatile__ ("wdc.flush	%0, r0;" \
+					: : "r" (i));
+#endif
 }
 
 static void __flush_dcache_range_wb(unsigned long start, unsigned long end)
 {
+#ifndef ASM_LOOP
+	int i;
+#endif
 	pr_debug("%s: start 0x%x, end 0x%x\n", __func__,
 				(unsigned int)start, (unsigned int) end);
 
 	CACHE_LOOP_LIMITS(start, end,
 			cpuinfo.dcache_line_length, cpuinfo.dcache_size);
+#ifdef ASM_LOOP
 	CACHE_RANGE_LOOP_2(start, end, cpuinfo.dcache_line_length, wdc.flush);
+#else
+	for (i = start; i < end; i += cpuinfo.icache_line_length)
+		__asm__ __volatile__ ("wdc.flush	%0, r0;"	\
+				: : "r" (i));
+#endif
 }
 
 /* struct for wb caches and for wt caches */
···
 #define CPUVER_7_20_A	0x0c
 #define CPUVER_7_20_D	0x0f
 
-#define INFO(s)	printk(KERN_INFO "cache: " s " \n");
+#define INFO(s)	printk(KERN_INFO "cache: " s "\n");
 
 void microblaze_cache_init(void)
 {
···
 			}
 		}
 	}
+	invalidate_dcache();
+	enable_dcache();
+
+	invalidate_icache();
+	enable_icache();
 }

arch/microblaze/kernel/dma.c

···
+/*
+ * Copyright (C) 2009-2010 PetaLogix
+ * Copyright (C) 2006 Benjamin Herrenschmidt, IBM Corporation
+ *
+ * Provide default implementations of the DMA mapping callbacks for
+ * directly mapped busses.
+ */
+
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/dma-debug.h>
+#include <asm/bug.h>
+#include <asm/cacheflush.h>
+
+/*
+ * Generic direct DMA implementation
+ *
+ * This implementation supports a per-device offset that can be applied if
+ * the address at which memory is visible to devices is not 0. Platform code
+ * can set archdata.dma_data to an unsigned long holding the offset. By
+ * default the offset is PCI_DRAM_OFFSET.
+ */
+static inline void __dma_sync_page(unsigned long paddr, unsigned long offset,
+				size_t size, enum dma_data_direction direction)
+{
+	switch (direction) {
+	case DMA_TO_DEVICE:
+		flush_dcache_range(paddr + offset, paddr + offset + size);
+		break;
+	case DMA_FROM_DEVICE:
+		invalidate_dcache_range(paddr + offset, paddr + offset + size);
+		break;
+	default:
+		BUG();
+	}
+}
+
+static unsigned long get_dma_direct_offset(struct device *dev)
+{
+	if (dev)
+		return (unsigned long)dev->archdata.dma_data;
+
+	return PCI_DRAM_OFFSET; /* FIXME Not sure if is correct */
+}
+
+#define NOT_COHERENT_CACHE
+
+static void *dma_direct_alloc_coherent(struct device *dev, size_t size,
+				dma_addr_t *dma_handle, gfp_t flag)
+{
+#ifdef NOT_COHERENT_CACHE
+	return consistent_alloc(flag, size, dma_handle);
+#else
+	void *ret;
+	struct page *page;
+	int node = dev_to_node(dev);
+
+	/* ignore region specifiers */
+	flag  &= ~(__GFP_HIGHMEM);
+
+	page = alloc_pages_node(node, flag, get_order(size));
+	if (page == NULL)
+		return NULL;
+	ret = page_address(page);
+	memset(ret, 0, size);
+	*dma_handle = virt_to_phys(ret) + get_dma_direct_offset(dev);
+
+	return ret;
+#endif
+}
+
+static void dma_direct_free_coherent(struct device *dev, size_t size,
+			      void *vaddr, dma_addr_t dma_handle)
+{
+#ifdef NOT_COHERENT_CACHE
+	consistent_free(vaddr);
+#else
+	free_pages((unsigned long)vaddr, get_order(size));
+#endif
+}
+
+static int dma_direct_map_sg(struct device *dev, struct scatterlist *sgl,
+			     int nents, enum dma_data_direction direction,
+			     struct dma_attrs *attrs)
+{
+	struct scatterlist *sg;
+	int i;
+
+	/* FIXME this part of code is untested */
+	for_each_sg(sgl, sg, nents, i) {
+		sg->dma_address = sg_phys(sg) + get_dma_direct_offset(dev);
+		sg->dma_length = sg->length;
+		__dma_sync_page(page_to_phys(sg_page(sg)), sg->offset,
+							sg->length, direction);
+	}
+
+	return nents;
+}
+
+static void dma_direct_unmap_sg(struct device *dev, struct scatterlist *sg,
+				int nents, enum dma_data_direction direction,
+				struct dma_attrs *attrs)
+{
+}
+
+static int dma_direct_dma_supported(struct device *dev, u64 mask)
+{
+	return 1;
+}
+
+static inline dma_addr_t dma_direct_map_page(struct device *dev,
+					     struct page *page,
+					     unsigned long offset,
+					     size_t size,
+					     enum dma_data_direction direction,
+					     struct dma_attrs *attrs)
+{
+	__dma_sync_page(page_to_phys(page), offset, size, direction);
+	return page_to_phys(page) + offset + get_dma_direct_offset(dev);
+}
+
+static inline void dma_direct_unmap_page(struct device *dev,
+					 dma_addr_t dma_address,
+					 size_t size,
+					 enum dma_data_direction direction,
+					 struct dma_attrs *attrs)
+{
+/* There is not necessary to do cache cleanup
+ *
+ * phys_to_virt is here because in __dma_sync_page is __virt_to_phys and
+ * dma_address is physical address
+ */
+	__dma_sync_page(dma_address, 0 , size, direction);
+}
+
+struct dma_map_ops dma_direct_ops = {
+	.alloc_coherent	= dma_direct_alloc_coherent,
+	.free_coherent	= dma_direct_free_coherent,
+	.map_sg		= dma_direct_map_sg,
+	.unmap_sg	= dma_direct_unmap_sg,
+	.dma_supported	= dma_direct_dma_supported,
+	.map_page	= dma_direct_map_page,
+	.unmap_page	= dma_direct_unmap_page,
+};
+EXPORT_SYMBOL(dma_direct_ops);
+
+/* Number of entries preallocated for DMA-API debugging */
+#define PREALLOC_DMA_DEBUG_ENTRIES (1 << 16)
+
+static int __init dma_init(void)
+{
+       dma_debug_init(PREALLOC_DMA_DEBUG_ENTRIES);
+
+       return 0;
+}
+fs_initcall(dma_init);

arch/microblaze/kernel/entry.S

···
 	swi	r11, r1, PTO+PT_R1;		/* Store user SP.  */
 	addi	r11, r0, 1;
 	swi	r11, r0, TOPHYS(PER_CPU(KM));	/* Now we're in kernel-mode.  */
-2:	lwi	r31, r0, TOPHYS(PER_CPU(CURRENT_SAVE));	/* get saved current */
+2:	lwi	CURRENT_TASK, r0, TOPHYS(PER_CPU(CURRENT_SAVE));
 	/* Save away the syscall number.  */
 	swi	r12, r1, PTO+PT_R0;
 	tovirt(r1,r1)
···
 	rtid	r11, 0
 	nop
 3:
-	add	r11, r0, CURRENT_TASK	 /* Get current task ptr into r11 */
-	lwi	r11, r11, TS_THREAD_INFO /* get thread info */
+	lwi	r11, CURRENT_TASK, TS_THREAD_INFO /* get thread info */
 	lwi	r11, r11, TI_FLAGS	 /* get flags in thread info */
 	andi	r11, r11, _TIF_WORK_SYSCALL_MASK
 	beqi	r11, 4f
···
 /* See if returning to kernel mode, if so, skip resched &c.  */
 	bnei	r11, 2f;
 
+	swi	r3, r1, PTO + PT_R3
+	swi	r4, r1, PTO + PT_R4
+
 	/* We're returning to user mode, so check for various conditions that
 	 * trigger rescheduling. */
-	# FIXME: Restructure all these flag checks.
-	add	r11, r0, CURRENT_TASK;	/* Get current task ptr into r11 */
-	lwi	r11, r11, TS_THREAD_INFO;	/* get thread info */
+	/* FIXME: Restructure all these flag checks. */
+	lwi	r11, CURRENT_TASK, TS_THREAD_INFO;	/* get thread info */
 	lwi	r11, r11, TI_FLAGS;		/* get flags in thread info */
 	andi	r11, r11, _TIF_WORK_SYSCALL_MASK
 	beqi	r11, 1f
 
-	swi	r3, r1, PTO + PT_R3
-	swi	r4, r1, PTO + PT_R4
 	brlid	r15, do_syscall_trace_leave
 	addik	r5, r1, PTO + PT_R0
-	lwi	r3, r1, PTO + PT_R3
-	lwi	r4, r1, PTO + PT_R4
 1:
-
 	/* We're returning to user mode, so check for various conditions that
 	 * trigger rescheduling. */
-	/* Get current task ptr into r11 */
-	add	r11, r0, CURRENT_TASK;	/* Get current task ptr into r11 */
-	lwi	r11, r11, TS_THREAD_INFO;	/* get thread info */
+	/* get thread info from current task */
+	lwi	r11, CURRENT_TASK, TS_THREAD_INFO;
 	lwi	r11, r11, TI_FLAGS;		/* get flags in thread info */
 	andi	r11, r11, _TIF_NEED_RESCHED;
 	beqi	r11, 5f;
 
-	swi	r3, r1, PTO + PT_R3; /* store syscall result */
-	swi	r4, r1, PTO + PT_R4;
 	bralid	r15, schedule;	/* Call scheduler */
 	nop;				/* delay slot */
-	lwi	r3, r1, PTO + PT_R3; /* restore syscall result */
-	lwi	r4, r1, PTO + PT_R4;
 
 	/* Maybe handle a signal */
-5:	add	r11, r0, CURRENT_TASK; /* Get current task ptr into r11 */
-	lwi	r11, r11, TS_THREAD_INFO;	/* get thread info */
+5:	/* get thread info from current task*/
+	lwi	r11, CURRENT_TASK, TS_THREAD_INFO;
 	lwi	r11, r11, TI_FLAGS;	/* get flags in thread info */
 	andi	r11, r11, _TIF_SIGPENDING;
 	beqi	r11, 1f;		/* Signals to handle, handle them */
 
-	swi	r3, r1, PTO + PT_R3; /* store syscall result */
-	swi	r4, r1, PTO + PT_R4;
 	la	r5, r1, PTO;		/* Arg 1: struct pt_regs *regs */
-	add	r6, r0, r0;		/* Arg 2: sigset_t *oldset */
 	addi	r7, r0, 1;		/* Arg 3: int in_syscall */
 	bralid	r15, do_signal;	/* Handle any signals */
-	nop;
+	add	r6, r0, r0;		/* Arg 2: sigset_t *oldset */
+
+/* Finally, return to user state.  */
+1:
 	lwi	r3, r1, PTO + PT_R3; /* restore syscall result */
 	lwi	r4, r1, PTO + PT_R4;
 
-/* Finally, return to user state.  */
-1:	swi	r0, r0, PER_CPU(KM);	/* Now officially in user state. */
-	add	r11, r0, CURRENT_TASK;	/* Get current task ptr into r11 */
-	swi	r11, r0, PER_CPU(CURRENT_SAVE); /* save current */
+	swi	r0, r0, PER_CPU(KM);	/* Now officially in user state. */
+	swi	CURRENT_TASK, r0, PER_CPU(CURRENT_SAVE); /* save current */
 	VM_OFF;
 	tophys(r1,r1);
 	RESTORE_REGS;
···
 	swi	r11, r1, PTO+PT_R1; /* Store user SP.  */		\
 	addi	r11, r0, 1;						\
 	swi	r11, r0, TOPHYS(PER_CPU(KM)); /* Now we're in kernel-mode.*/\
-2:	lwi	r31, r0, TOPHYS(PER_CPU(CURRENT_SAVE)); /* get saved current */\
+2:	lwi	CURRENT_TASK, r0, TOPHYS(PER_CPU(CURRENT_SAVE));	\
 	/* Save away the syscall number.  */				\
 	swi	r0, r1, PTO+PT_R0;					\
 	tovirt(r1,r1)
···
 
 	/* We're returning to user mode, so check for various conditions that
 	   trigger rescheduling. */
-	/* Get current task ptr into r11 */
-	add	r11, r0, CURRENT_TASK; /* Get current task ptr into r11 */
-	lwi	r11, r11, TS_THREAD_INFO;	/* get thread info */
+	lwi	r11, CURRENT_TASK, TS_THREAD_INFO;	/* get thread info */
 	lwi	r11, r11, TI_FLAGS;	/* get flags in thread info */
 	andi	r11, r11, _TIF_NEED_RESCHED;
 	beqi	r11, 5f;
···
 	nop;				/* delay slot */
 
 	/* Maybe handle a signal */
-5:	add	r11, r0, CURRENT_TASK; /* Get current task ptr into r11 */
-	lwi	r11, r11, TS_THREAD_INFO;	/* get thread info */
+5:	lwi	r11, CURRENT_TASK, TS_THREAD_INFO;	/* get thread info */
 	lwi	r11, r11, TI_FLAGS;	/* get flags in thread info */
 	andi	r11, r11, _TIF_SIGPENDING;
 	beqi	r11, 1f;		/* Signals to handle, handle them */
···
 	 * store return registers separately because this macros is use
 	 * for others exceptions */
 	la	r5, r1, PTO;		/* Arg 1: struct pt_regs *regs */
-	add	r6, r0, r0;		/* Arg 2: sigset_t *oldset */
 	addi	r7, r0, 0;		/* Arg 3: int in_syscall */
 	bralid	r15, do_signal;	/* Handle any signals */
-	nop;
+	add	r6, r0, r0;		/* Arg 2: sigset_t *oldset */
 
 /* Finally, return to user state.  */
 1:	swi	r0, r0, PER_CPU(KM);	/* Now officially in user state. */
-	add	r11, r0, CURRENT_TASK; /* Get current task ptr into r11 */
-	swi	r11, r0, PER_CPU(CURRENT_SAVE); /* save current */
+	swi	CURRENT_TASK, r0, PER_CPU(CURRENT_SAVE); /* save current */
 	VM_OFF;
 	tophys(r1,r1);
 
···
 	swi	r11, r0, TOPHYS(PER_CPU(KM));
 
 2:
-	lwi	r31, r0, TOPHYS(PER_CPU(CURRENT_SAVE));
+	lwi	CURRENT_TASK, r0, TOPHYS(PER_CPU(CURRENT_SAVE));
 	swi	r0, r1, PTO + PT_R0;
 	tovirt(r1,r1)
 	la	r5, r1, PTO;
···
 	lwi	r11, r1, PTO + PT_MODE;
 	bnei	r11, 2f;
 
-	add	r11, r0, CURRENT_TASK;
-	lwi	r11, r11, TS_THREAD_INFO;
+	lwi	r11, CURRENT_TASK, TS_THREAD_INFO;
 	lwi	r11, r11, TI_FLAGS; /* MS: get flags from thread info */
 	andi	r11, r11, _TIF_NEED_RESCHED;
 	beqi	r11, 5f
···
 	nop; /* delay slot */
 
     /* Maybe handle a signal */
-5:	add	r11, r0, CURRENT_TASK;
-	lwi	r11, r11, TS_THREAD_INFO; /* MS: get thread info */
+5:	lwi	r11, CURRENT_TASK, TS_THREAD_INFO; /* MS: get thread info */
 	lwi	r11, r11, TI_FLAGS; /* get flags in thread info */
 	andi	r11, r11, _TIF_SIGPENDING;
 	beqid	r11, no_intr_resched
···
     /* Disable interrupts, we are now committed to the state restore */
 	disable_irq
 	swi	r0, r0, PER_CPU(KM); /* MS: Now officially in user state. */
-	add	r11, r0, CURRENT_TASK;
-	swi	r11, r0, PER_CPU(CURRENT_SAVE);
+	swi	CURRENT_TASK, r0, PER_CPU(CURRENT_SAVE);
 	VM_OFF;
 	tophys(r1,r1);
 	lwi	r3, r1, PTO + PT_R3; /* MS: restore saved r3, r4 registers */
···
 	lwi	r1, r1, PT_R1 - PT_SIZE;
 	bri	6f;
 /* MS: Return to kernel state. */
-2:	VM_OFF /* MS: turn off MMU */
+2:
+#ifdef CONFIG_PREEMPT
+	lwi	r11, CURRENT_TASK, TS_THREAD_INFO;
+	/* MS: get preempt_count from thread info */
+	lwi	r5, r11, TI_PREEMPT_COUNT;
+	bgti	r5, restore;
+
+	lwi	r5, r11, TI_FLAGS;		/* get flags in thread info */
+	andi	r5, r5, _TIF_NEED_RESCHED;
+	beqi	r5, restore /* if zero jump over */
+
+preempt:
+	/* interrupts are off that's why I am calling preempt_chedule_irq */
+	bralid	r15, preempt_schedule_irq
+	nop
+	lwi	r11, CURRENT_TASK, TS_THREAD_INFO;	/* get thread info */
+	lwi	r5, r11, TI_FLAGS;		/* get flags in thread info */
+	andi	r5, r5, _TIF_NEED_RESCHED;
+	bnei	r5, preempt /* if non zero jump to resched */
+restore:
+#endif
+	VM_OFF /* MS: turn off MMU */
 	tophys(r1,r1)
 	lwi	r3, r1, PTO + PT_R3; /* MS: restore saved r3, r4 registers */
 	lwi	r4, r1, PTO + PT_R4;
···
 	swi	r11, r1, PTO+PT_R1; /* Store user SP.  */
 	addi	r11, r0, 1;
 	swi	r11, r0, TOPHYS(PER_CPU(KM));	/* Now we're in kernel-mode.  */
-2:	lwi	r31, r0, TOPHYS(PER_CPU(CURRENT_SAVE)); /* get saved current */
+2:	lwi	CURRENT_TASK, r0, TOPHYS(PER_CPU(CURRENT_SAVE));
 	/* Save away the syscall number.  */
 	swi	r0, r1, PTO+PT_R0;
 	tovirt(r1,r1)
···
 	bnei	r11, 2f;
 
 	/* Get current task ptr into r11 */
-	add	r11, r0, CURRENT_TASK; /* Get current task ptr into r11 */
-	lwi	r11, r11, TS_THREAD_INFO;	/* get thread info */
+	lwi	r11, CURRENT_TASK, TS_THREAD_INFO;	/* get thread info */
 	lwi	r11, r11, TI_FLAGS;	/* get flags in thread info */
 	andi	r11, r11, _TIF_NEED_RESCHED;
 	beqi	r11, 5f;
···
 	/* XXX m68knommu also checks TASK_STATE & TASK_COUNTER here.  */
 
 	/* Maybe handle a signal */
-5:	add	r11, r0, CURRENT_TASK; /* Get current task ptr into r11 */
-	lwi	r11, r11, TS_THREAD_INFO;	/* get thread info */
+5:	lwi	r11, CURRENT_TASK, TS_THREAD_INFO;	/* get thread info */
 	lwi	r11, r11, TI_FLAGS;	/* get flags in thread info */
 	andi	r11, r11, _TIF_SIGPENDING;
 	beqi	r11, 1f;		/* Signals to handle, handle them */
···
 	   (in a possibly modified form) after do_signal returns.  */
 
 	la	r5, r1, PTO;		/* Arg 1: struct pt_regs *regs */
-	add	r6, r0, r0;		/* Arg 2: sigset_t *oldset */
 	addi  r7, r0, 0;	/* Arg 3: int in_syscall */
 	bralid	r15, do_signal;	/* Handle any signals */
-	nop;
+	add	r6, r0, r0;		/* Arg 2: sigset_t *oldset */
 
 
 /* Finally, return to user state.  */
 1:	swi	r0, r0, PER_CPU(KM);	/* Now officially in user state. */
-	add	r11, r0, CURRENT_TASK; /* Get current task ptr into r11 */
-	swi	r11, r0, PER_CPU(CURRENT_SAVE); /* save current */
+	swi	CURRENT_TASK, r0, PER_CPU(CURRENT_SAVE); /* save current */
 	VM_OFF;
 	tophys(r1,r1);
 
···
 
 ENTRY(_switch_to)
 	/* prepare return value */
-	addk	r3, r0, r31
+	addk	r3, r0, CURRENT_TASK
 
 	/* save registers in cpu_context */
 	/* use r11 and r12, volatile registers, as temp register */
···
 	nop
 	swi	r12, r11, CC_FSR
 
-	/* update r31, the current */
-	lwi	r31, r6, TI_TASK/* give me pointer to task which will be next */
+	/* update r31, the current-give me pointer to task which will be next */
+	lwi	CURRENT_TASK, r6, TI_TASK
 	/* stored it to current_save too */
-	swi	r31, r0, PER_CPU(CURRENT_SAVE)
+	swi	CURRENT_TASK, r0, PER_CPU(CURRENT_SAVE)
 
 	/* get new process' cpu context and restore */
 	/* give me start where start context of next task */

arch/microblaze/kernel/head.S

···
 	tophys(r4,r4)			/* convert to phys address */
 	ori	r3, r0, COMMAND_LINE_SIZE - 1 /* number of loops */
 _copy_command_line:
-	lbu	r7, r5, r6 /* r7=r5+r6 - r5 contain pointer to command line */
-	sb	r7, r4, r6		/* addr[r4+r6]= r7*/
+	lbu	r2, r5, r6 /* r7=r5+r6 - r5 contain pointer to command line */
+	sb	r2, r4, r6		/* addr[r4+r6]= r7*/
 	addik	r6, r6, 1		/* increment counting */
 	bgtid	r3, _copy_command_line	/* loop for all entries       */
 	addik	r3, r3, -1		/* descrement loop */
···
 	addik	r3, r3, -1
 	/* sync */
 
+	/* Setup the kernel PID */
+	mts	rpid,r0			/* Load the kernel PID */
+	nop
+	bri	4
+
 	/*
 	 * We should still be executing code at physical address area
 	 * RAM_BASEADDR at this point. However, kernel code is at
···
 
 	addik	r3,r0, CONFIG_KERNEL_START /* Load the kernel virtual address */
 	tophys(r4,r3)			/* Load the kernel physical address */
-
-	mts	rpid,r0			/* Load the kernel PID */
-	nop
-	bri	4
 
 	/*
 	 * Configure and load two entries into TLB slots 0 and 1.

arch/microblaze/kernel/irq.c

···
 	}
 	return 0;
 }
+
+/* MS: There is no any advance mapping mechanism. We are using simple 32bit
+  intc without any cascades or any connection that's why mapping is 1:1 */
+unsigned int irq_create_mapping(struct irq_host *host, irq_hw_number_t hwirq)
+{
+	return hwirq;
+}
+EXPORT_SYMBOL_GPL(irq_create_mapping);
+
+unsigned int irq_create_of_mapping(struct device_node *controller,
+					u32 *intspec, unsigned int intsize)
+{
+	return intspec[0];
+}
+EXPORT_SYMBOL_GPL(irq_create_of_mapping);

arch/microblaze/kernel/setup.c

···
 #include <linux/io.h>
 #include <linux/bug.h>
 #include <linux/param.h>
+#include <linux/pci.h>
 #include <linux/cache.h>
+#include <linux/of_platform.h>
+#include <linux/dma-mapping.h>
 #include <asm/cacheflush.h>
 #include <asm/entry.h>
 #include <asm/cpuinfo.h>
···
 
 	microblaze_cache_init();
 
-	invalidate_dcache();
-	enable_dcache();
-
-	invalidate_icache();
-	enable_icache();
-
 	setup_memory();
+
+	xilinx_pci_init();
 
 #if defined(CONFIG_SELFMOD_INTC) || defined(CONFIG_SELFMOD_TIMER)
 	printk(KERN_NOTICE "Self modified code enable\n");
···
 }
 arch_initcall(microblaze_debugfs_init);
 #endif
+
+static int dflt_bus_notify(struct notifier_block *nb,
+				unsigned long action, void *data)
+{
+	struct device *dev = data;
+
+	/* We are only intereted in device addition */
+	if (action != BUS_NOTIFY_ADD_DEVICE)
+		return 0;
+
+	set_dma_ops(dev, &dma_direct_ops);
+
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block dflt_plat_bus_notifier = {
+	.notifier_call = dflt_bus_notify,
+	.priority = INT_MAX,
+};
+
+static struct notifier_block dflt_of_bus_notifier = {
+	.notifier_call = dflt_bus_notify,
+	.priority = INT_MAX,
+};
+
+static int __init setup_bus_notifier(void)
+{
+	bus_register_notifier(&platform_bus_type, &dflt_plat_bus_notifier);
+	bus_register_notifier(&of_platform_bus_type, &dflt_of_bus_notifier);
+
+	return 0;
+}
+
+arch_initcall(setup_bus_notifier);

arch/microblaze/mm/Makefile

···
 # Makefile
 #
 
-obj-y := init.o
+obj-y := consistent.o init.o
 
 obj-$(CONFIG_MMU) += pgtable.o mmu_context.o fault.o

arch/microblaze/mm/consistent.c

···
+/*
+ * Microblaze support for cache consistent memory.
+ * Copyright (C) 2010 Michal Simek <[e-mail]>
+ * Copyright (C) 2010 PetaLogix
+ * Copyright (C) 2005 John Williams <[e-mail]>
+ *
+ * Based on PowerPC version derived from arch/arm/mm/consistent.c
+ * Copyright (C) 2001 Dan Malek ([e-mail])
+ * Copyright (C) 2000 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/ptrace.h>
+#include <linux/mman.h>
+#include <linux/mm.h>
+#include <linux/swap.h>
+#include <linux/stddef.h>
+#include <linux/vmalloc.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/bootmem.h>
+#include <linux/highmem.h>
+#include <linux/pci.h>
+#include <linux/interrupt.h>
+
+#include <asm/pgalloc.h>
+#include <linux/io.h>
+#include <linux/hardirq.h>
+#include <asm/mmu_context.h>
+#include <asm/mmu.h>
+#include <linux/uaccess.h>
+#include <asm/pgtable.h>
+#include <asm/cpuinfo.h>
+
+#ifndef CONFIG_MMU
+
+/* I have to use dcache values because I can't relate on ram size */
+#define UNCACHED_SHADOW_MASK (cpuinfo.dcache_high - cpuinfo.dcache_base + 1)
+
+/*
+ * Consistent memory allocators. Used for DMA devices that want to
+ * share uncached memory with the processor core.
+ * My crufty no-MMU approach is simple. In the HW platform we can optionally
+ * mirror the DDR up above the processor cacheable region.  So, memory accessed
+ * in this mirror region will not be cached.  It's alloced from the same
+ * pool as normal memory, but the handle we return is shifted up into the
+ * uncached region.  This will no doubt cause big problems if memory allocated
+ * here is not also freed properly. -- JW
+ */
+void *consistent_alloc(int gfp, size_t size, dma_addr_t *dma_handle)
+{
+	struct page *page, *end, *free;
+	unsigned long order;
+	void *ret, *virt;
+
+	if (in_interrupt())
+		BUG();
+
+	size = PAGE_ALIGN(size);
+	order = get_order(size);
+
+	page = alloc_pages(gfp, order);
+	if (!page)
+		goto no_page;
+
+	/* We could do with a page_to_phys and page_to_bus here. */
+	virt = page_address(page);
+	ret = ioremap(virt_to_phys(virt), size);
+	if (!ret)
+		goto no_remap;
+
+	/*
+	 * Here's the magic!  Note if the uncached shadow is not implemented,
+	 * it's up to the calling code to also test that condition and make
+	 * other arranegments, such as manually flushing the cache and so on.
+	 */
+#ifdef CONFIG_XILINX_UNCACHED_SHADOW
+	ret = (void *)((unsigned) ret | UNCACHED_SHADOW_MASK);
+#endif
+	/* dma_handle is same as physical (shadowed) address */
+	*dma_handle = (dma_addr_t)ret;
+
+	/*
+	 * free wasted pages.  We skip the first page since we know
+	 * that it will have count = 1 and won't require freeing.
+	 * We also mark the pages in use as reserved so that
+	 * remap_page_range works.
+	 */
+	page = virt_to_page(virt);
+	free = page + (size >> PAGE_SHIFT);
+	end  = page + (1 << order);
+
+	for (; page < end; page++) {
+		init_page_count(page);
+		if (page >= free)
+			__free_page(page);
+		else
+			SetPageReserved(page);
+	}
+
+	return ret;
+no_remap:
+	__free_pages(page, order);
+no_page:
+	return NULL;
+}
+
+#else
+
+void *consistent_alloc(int gfp, size_t size, dma_addr_t *dma_handle)
+{
+	int order, err, i;
+	unsigned long page, va, flags;
+	phys_addr_t pa;
+	struct vm_struct *area;
+	void	 *ret;
+
+	if (in_interrupt())
+		BUG();
+
+	/* Only allocate page size areas. */
+	size = PAGE_ALIGN(size);
+	order = get_order(size);
+
+	page = __get_free_pages(gfp, order);
+	if (!page) {
+		BUG();
+		return NULL;
+	}
+
+	/*
+	 * we need to ensure that there are no cachelines in use,
+	 * or worse dirty in this area.
+	 */
+	flush_dcache_range(virt_to_phys(page), virt_to_phys(page) + size);
+
+	/* Allocate some common virtual space to map the new pages. */
+	area = get_vm_area(size, VM_ALLOC);
+	if (area == NULL) {
+		free_pages(page, order);
+		return NULL;
+	}
+	va = (unsigned long) area->addr;
+	ret = (void *)va;
+
+	/* This gives us the real physical address of the first page. */
+	*dma_handle = pa = virt_to_bus((void *)page);
+
+	/* MS: This is the whole magic - use cache inhibit pages */
+	flags = _PAGE_KERNEL | _PAGE_NO_CACHE;
+
+	/*
+	 * Set refcount=1 on all pages in an order>0
+	 * allocation so that vfree() will actually
+	 * free all pages that were allocated.
+	 */
+	if (order > 0) {
+		struct page *rpage = virt_to_page(page);
+		for (i = 1; i < (1 << order); i++)
+			init_page_count(rpage+i);
+	}
+
+	err = 0;
+	for (i = 0; i < size && err == 0; i += PAGE_SIZE)
+		err = map_page(va+i, pa+i, flags);
+
+	if (err) {
+		vfree((void *)va);
+		return NULL;
+	}
+
+	return ret;
+}
+#endif /* CONFIG_MMU */
+EXPORT_SYMBOL(consistent_alloc);
+
+/*
+ * free page(s) as defined by the above mapping.
+ */
+void consistent_free(void *vaddr)
+{
+	if (in_interrupt())
+		BUG();
+
+	/* Clear SHADOW_MASK bit in address, and free as per usual */
+#ifdef CONFIG_XILINX_UNCACHED_SHADOW
+	vaddr = (void *)((unsigned)vaddr & ~UNCACHED_SHADOW_MASK);
+#endif
+	vfree(vaddr);
+}
+EXPORT_SYMBOL(consistent_free);
+
+/*
+ * make an area consistent.
+ */
+void consistent_sync(void *vaddr, size_t size, int direction)
+{
+	unsigned long start;
+	unsigned long end;
+
+	start = (unsigned long)vaddr;
+
+	/* Convert start address back down to unshadowed memory region */
+#ifdef CONFIG_XILINX_UNCACHED_SHADOW
+	start &= ~UNCACHED_SHADOW_MASK;
+#endif
+	end = start + size;
+
+	switch (direction) {
+	case PCI_DMA_NONE:
+		BUG();
+	case PCI_DMA_FROMDEVICE:	/* invalidate only */
+		flush_dcache_range(start, end);
+		break;
+	case PCI_DMA_TODEVICE:		/* writeback only */
+		flush_dcache_range(start, end);
+		break;
+	case PCI_DMA_BIDIRECTIONAL:	/* writeback and invalidate */
+		flush_dcache_range(start, end);
+		break;
+	}
+}
+EXPORT_SYMBOL(consistent_sync);
+
+/*
+ * consistent_sync_page makes memory consistent. identical
+ * to consistent_sync, but takes a struct page instead of a
+ * virtual address
+ */
+void consistent_sync_page(struct page *page, unsigned long offset,
+	size_t size, int direction)
+{
+	unsigned long start = (unsigned long)page_address(page) + offset;
+	consistent_sync((void *)start, size, direction);
+}
+EXPORT_SYMBOL(consistent_sync_page);

arch/microblaze/mm/init.c

···
 #include <asm/sections.h>
 #include <asm/tlb.h>
 
+/* Use for MMU and noMMU because of PCI generic code */
+int mem_init_done;
+
 #ifndef CONFIG_MMU
 unsigned int __page_offset;
 EXPORT_SYMBOL(__page_offset);
···
 #else
 DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
 
-int mem_init_done;
 static int init_bootmem_done;
 #endif /* CONFIG_MMU */
 
···
 			(unsigned long)(&__init_end));
 }
 
-/* FIXME from arch/powerpc/mm/mem.c*/
-void show_mem(void)
-{
-	printk(KERN_NOTICE "%s\n", __func__);
-}
-
 void __init mem_init(void)
 {
 	high_memory = (void *)__va(memory_end);
···
 	printk(KERN_INFO "Memory: %luk/%luk available\n",
 	       nr_free_pages() << (PAGE_SHIFT-10),
 	       num_physpages << (PAGE_SHIFT-10));
-#ifdef CONFIG_MMU
 	mem_init_done = 1;
-#endif
 }
 
 #ifndef CONFIG_MMU
···
 }
 EXPORT_SYMBOL(___range_ok);
 
+int page_is_ram(unsigned long pfn)
+{
+	return __range_ok(pfn, 0);
+}
 #else
 int page_is_ram(unsigned long pfn)
 {
···
 	}
 	return p;
 }
+
 #endif /* CONFIG_MMU */
+
+void * __init_refok alloc_maybe_bootmem(size_t size, gfp_t mask)
+{
+	if (mem_init_done)
+		return kmalloc(size, mask);
+	else
+		return alloc_bootmem(size);
+}
+
+void * __init_refok zalloc_maybe_bootmem(size_t size, gfp_t mask)
+{
+	void *p;
+
+	if (mem_init_done)
+		p = kzalloc(size, mask);
+	else {
+		p = alloc_bootmem(size);
+		if (p)
+			memset(p, 0, size);
+	}
+	return p;
+}

arch/microblaze/mm/pgtable.c

···
 		area = get_vm_area(size, VM_IOREMAP);
 		if (area == NULL)
 			return NULL;
-		v = VMALLOC_VMADDR(area->addr);
+		v = (unsigned long) area->addr;
 	} else {
 		v = (ioremap_bot -= size);
 	}

arch/microblaze/pci/Makefile

···
+#
+# Makefile
+#
+
+obj-$(CONFIG_PCI)		+= pci_32.o pci-common.o indirect_pci.o iomap.o
+obj-$(CONFIG_PCI_XILINX)	+= xilinx_pci.o

arch/microblaze/pci/indirect_pci.c

···
+/*
+ * Support for indirect PCI bridges.
+ *
+ * Copyright (C) 1998 Gabriel Paubert.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/string.h>
+#include <linux/init.h>
+
+#include <asm/io.h>
+#include <asm/prom.h>
+#include <asm/pci-bridge.h>
+
+static int
+indirect_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
+		     int len, u32 *val)
+{
+	struct pci_controller *hose = pci_bus_to_host(bus);
+	volatile void __iomem *cfg_data;
+	u8 cfg_type = 0;
+	u32 bus_no, reg;
+
+	if (hose->indirect_type & INDIRECT_TYPE_NO_PCIE_LINK) {
+		if (bus->number != hose->first_busno)
+			return PCIBIOS_DEVICE_NOT_FOUND;
+		if (devfn != 0)
+			return PCIBIOS_DEVICE_NOT_FOUND;
+	}
+
+	if (hose->indirect_type & INDIRECT_TYPE_SET_CFG_TYPE)
+		if (bus->number != hose->first_busno)
+			cfg_type = 1;
+
+	bus_no = (bus->number == hose->first_busno) ?
+			hose->self_busno : bus->number;
+
+	if (hose->indirect_type & INDIRECT_TYPE_EXT_REG)
+		reg = ((offset & 0xf00) << 16) | (offset & 0xfc);
+	else
+		reg = offset & 0xfc; /* Only 3 bits for function */
+
+	if (hose->indirect_type & INDIRECT_TYPE_BIG_ENDIAN)
+		out_be32(hose->cfg_addr, (0x80000000 | (bus_no << 16) |
+			 (devfn << 8) | reg | cfg_type));
+	else
+		out_le32(hose->cfg_addr, (0x80000000 | (bus_no << 16) |
+			 (devfn << 8) | reg | cfg_type));
+
+	/*
+	 * Note: the caller has already checked that offset is
+	 * suitably aligned and that len is 1, 2 or 4.
+	 */
+	cfg_data = hose->cfg_data + (offset & 3); /* Only 3 bits for function */
+	switch (len) {
+	case 1:
+		*val = in_8(cfg_data);
+		break;
+	case 2:
+		*val = in_le16(cfg_data);
+		break;
+	default:
+		*val = in_le32(cfg_data);
+		break;
+	}
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int
+indirect_write_config(struct pci_bus *bus, unsigned int devfn, int offset,
+		      int len, u32 val)
+{
+	struct pci_controller *hose = pci_bus_to_host(bus);
+	volatile void __iomem *cfg_data;
+	u8 cfg_type = 0;
+	u32 bus_no, reg;
+
+	if (hose->indirect_type & INDIRECT_TYPE_NO_PCIE_LINK) {
+		if (bus->number != hose->first_busno)
+			return PCIBIOS_DEVICE_NOT_FOUND;
+		if (devfn != 0)
+			return PCIBIOS_DEVICE_NOT_FOUND;
+	}
+
+	if (hose->indirect_type & INDIRECT_TYPE_SET_CFG_TYPE)
+		if (bus->number != hose->first_busno)
+			cfg_type = 1;
+
+	bus_no = (bus->number == hose->first_busno) ?
+			hose->self_busno : bus->number;
+
+	if (hose->indirect_type & INDIRECT_TYPE_EXT_REG)
+		reg = ((offset & 0xf00) << 16) | (offset & 0xfc);
+	else
+		reg = offset & 0xfc;
+
+	if (hose->indirect_type & INDIRECT_TYPE_BIG_ENDIAN)
+		out_be32(hose->cfg_addr, (0x80000000 | (bus_no << 16) |
+			 (devfn << 8) | reg | cfg_type));
+	else
+		out_le32(hose->cfg_addr, (0x80000000 | (bus_no << 16) |
+			 (devfn << 8) | reg | cfg_type));
+
+	/* surpress setting of PCI_PRIMARY_BUS */
+	if (hose->indirect_type & INDIRECT_TYPE_SURPRESS_PRIMARY_BUS)
+		if ((offset == PCI_PRIMARY_BUS) &&
+			(bus->number == hose->first_busno))
+			val &= 0xffffff00;
+
+	/* Workaround for PCI_28 Errata in 440EPx/GRx */
+	if ((hose->indirect_type & INDIRECT_TYPE_BROKEN_MRM) &&
+			offset == PCI_CACHE_LINE_SIZE) {
+		val = 0;
+	}
+
+	/*
+	 * Note: the caller has already checked that offset is
+	 * suitably aligned and that len is 1, 2 or 4.
+	 */
+	cfg_data = hose->cfg_data + (offset & 3);
+	switch (len) {
+	case 1:
+		out_8(cfg_data, val);
+		break;
+	case 2:
+		out_le16(cfg_data, val);
+		break;
+	default:
+		out_le32(cfg_data, val);
+		break;
+	}
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static struct pci_ops indirect_pci_ops = {
+	.read = indirect_read_config,
+	.write = indirect_write_config,
+};
+
+void __init
+setup_indirect_pci(struct pci_controller *hose,
+		   resource_size_t cfg_addr,
+		   resource_size_t cfg_data, u32 flags)
+{
+	resource_size_t base = cfg_addr & PAGE_MASK;
+	void __iomem *mbase;
+
+	mbase = ioremap(base, PAGE_SIZE);
+	hose->cfg_addr = mbase + (cfg_addr & ~PAGE_MASK);
+	if ((cfg_data & PAGE_MASK) != base)
+		mbase = ioremap(cfg_data & PAGE_MASK, PAGE_SIZE);
+	hose->cfg_data = mbase + (cfg_data & ~PAGE_MASK);
+	hose->ops = &indirect_pci_ops;
+	hose->indirect_type = flags;
+}

arch/microblaze/pci/iomap.c

···
+/*
+ * ppc64 "iomap" interface implementation.
+ *
+ * (C) Copyright 2004 Linus Torvalds
+ */
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/mm.h>
+#include <asm/io.h>
+#include <asm/pci-bridge.h>
+
+void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max)
+{
+	resource_size_t start = pci_resource_start(dev, bar);
+	resource_size_t len = pci_resource_len(dev, bar);
+	unsigned long flags = pci_resource_flags(dev, bar);
+
+	if (!len)
+		return NULL;
+	if (max && len > max)
+		len = max;
+	if (flags & IORESOURCE_IO)
+		return ioport_map(start, len);
+	if (flags & IORESOURCE_MEM)
+		return ioremap(start, len);
+	/* What? */
+	return NULL;
+}
+EXPORT_SYMBOL(pci_iomap);
+
+void pci_iounmap(struct pci_dev *dev, void __iomem *addr)
+{
+	if (isa_vaddr_is_ioport(addr))
+		return;
+	if (pcibios_vaddr_is_ioport(addr))
+		return;
+	iounmap(addr);
+}
+EXPORT_SYMBOL(pci_iounmap);

arch/microblaze/pci/pci-common.c

···
+/*
+ * Contains common pci routines for ALL ppc platform
+ * (based on pci_32.c and pci_64.c)
+ *
+ * Port for PPC64 David Engebretsen, IBM Corp.
+ * Contains common pci routines for ppc64 platform, pSeries and iSeries brands.
+ *
+ * Copyright (C) 2003 Anton Blanchard <[e-mail]>, IBM
+ *   Rework, based on alpha PCI code.
+ *
+ * Common pmac/prep/chrp pci routines. -- Cort
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/string.h>
+#include <linux/init.h>
+#include <linux/bootmem.h>
+#include <linux/mm.h>
+#include <linux/list.h>
+#include <linux/syscalls.h>
+#include <linux/irq.h>
+#include <linux/vmalloc.h>
+
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <asm/prom.h>
+#include <asm/pci-bridge.h>
+#include <asm/byteorder.h>
+
+static DEFINE_SPINLOCK(hose_spinlock);
+LIST_HEAD(hose_list);
+
+/* XXX kill that some day ... */
+static int global_phb_number;		/* Global phb counter */
+
+/* ISA Memory physical address */
+resource_size_t isa_mem_base;
+
+/* Default PCI flags is 0 on ppc32, modified at boot on ppc64 */
+unsigned int pci_flags;
+
+static struct dma_map_ops *pci_dma_ops = &dma_direct_ops;
+
+void set_pci_dma_ops(struct dma_map_ops *dma_ops)
+{
+	pci_dma_ops = dma_ops;
+}
+
+struct dma_map_ops *get_pci_dma_ops(void)
+{
+	return pci_dma_ops;
+}
+EXPORT_SYMBOL(get_pci_dma_ops);
+
+int pci_set_dma_mask(struct pci_dev *dev, u64 mask)
+{
+	return dma_set_mask(&dev->dev, mask);
+}
+
+int pci_set_consistent_dma_mask(struct pci_dev *dev, u64 mask)
+{
+	int rc;
+
+	rc = dma_set_mask(&dev->dev, mask);
+	dev->dev.coherent_dma_mask = dev->dma_mask;
+
+	return rc;
+}
+
+struct pci_controller *pcibios_alloc_controller(struct device_node *dev)
+{
+	struct pci_controller *phb;
+
+	phb = zalloc_maybe_bootmem(sizeof(struct pci_controller), GFP_KERNEL);
+	if (!phb)
+		return NULL;
+	spin_lock(&hose_spinlock);
+	phb->global_number = global_phb_number++;
+	list_add_tail(&phb->list_node, &hose_list);
+	spin_unlock(&hose_spinlock);
+	phb->dn = dev;
+	phb->is_dynamic = mem_init_done;
+	return phb;
+}
+
+void pcibios_free_controller(struct pci_controller *phb)
+{
+	spin_lock(&hose_spinlock);
+	list_del(&phb->list_node);
+	spin_unlock(&hose_spinlock);
+
+	if (phb->is_dynamic)
+		kfree(phb);
+}
+
+static resource_size_t pcibios_io_size(const struct pci_controller *hose)
+{
+	return hose->io_resource.end - hose->io_resource.start + 1;
+}
+
+int pcibios_vaddr_is_ioport(void __iomem *address)
+{
+	int ret = 0;
+	struct pci_controller *hose;
+	resource_size_t size;
+
+	spin_lock(&hose_spinlock);
+	list_for_each_entry(hose, &hose_list, list_node) {
+		size = pcibios_io_size(hose);
+		if (address >= hose->io_base_virt &&
+		    address < (hose->io_base_virt + size)) {
+			ret = 1;
+			break;
+		}
+	}
+	spin_unlock(&hose_spinlock);
+	return ret;
+}
+
+unsigned long pci_address_to_pio(phys_addr_t address)
+{
+	struct pci_controller *hose;
+	resource_size_t size;
+	unsigned long ret = ~0;
+
+	spin_lock(&hose_spinlock);
+	list_for_each_entry(hose, &hose_list, list_node) {
+		size = pcibios_io_size(hose);
+		if (address >= hose->io_base_phys &&
+		    address < (hose->io_base_phys + size)) {
+			unsigned long base =
+				(unsigned long)hose->io_base_virt - _IO_BASE;
+			ret = base + (address - hose->io_base_phys);
+			break;
+		}
+	}
+	spin_unlock(&hose_spinlock);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(pci_address_to_pio);
+
+/*
+ * Return the domain number for this bus.
+ */
+int pci_domain_nr(struct pci_bus *bus)
+{
+	struct pci_controller *hose = pci_bus_to_host(bus);
+
+	return hose->global_number;
+}
+EXPORT_SYMBOL(pci_domain_nr);
+
+/* This routine is meant to be used early during boot, when the
+ * PCI bus numbers have not yet been assigned, and you need to
+ * issue PCI config cycles to an OF device.
+ * It could also be used to "fix" RTAS config cycles if you want
+ * to set pci_assign_all_buses to 1 and still use RTAS for PCI
+ * config cycles.
+ */
+struct pci_controller *pci_find_hose_for_OF_device(struct device_node *node)
+{
+	while (node) {
+		struct pci_controller *hose, *tmp;
+		list_for_each_entry_safe(hose, tmp, &hose_list, list_node)
+			if (hose->dn == node)
+				return hose;
+		node = node->parent;
+	}
+	return NULL;
+}
+
+static ssize_t pci_show_devspec(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct pci_dev *pdev;
+	struct device_node *np;
+
+	pdev = to_pci_dev(dev);
+	np = pci_device_to_OF_node(pdev);
+	if (np == NULL || np->full_name == NULL)
+		return 0;
+	return sprintf(buf, "%s", np->full_name);
+}
+static DEVICE_ATTR(devspec, S_IRUGO, pci_show_devspec, NULL);
+
+/* Add sysfs properties */
+int pcibios_add_platform_entries(struct pci_dev *pdev)
+{
+	return device_create_file(&pdev->dev, &dev_attr_devspec);
+}
+
+char __devinit *pcibios_setup(char *str)
+{
+	return str;
+}
+
+/*
+ * Reads the interrupt pin to determine if interrupt is use by card.
+ * If the interrupt is used, then gets the interrupt line from the
+ * openfirmware and sets it in the pci_dev and pci_config line.
+ */
+int pci_read_irq_line(struct pci_dev *pci_dev)
+{
+	struct of_irq oirq;
+	unsigned int virq;
+
+	/* The current device-tree that iSeries generates from the HV
+	 * PCI informations doesn't contain proper interrupt routing,
+	 * and all the fallback would do is print out crap, so we
+	 * don't attempt to resolve the interrupts here at all, some
+	 * iSeries specific fixup does it.
+	 *
+	 * In the long run, we will hopefully fix the generated device-tree
+	 * instead.
+	 */
+	pr_debug("PCI: Try to map irq for %s...\n", pci_name(pci_dev));
+
+#ifdef DEBUG
+	memset(&oirq, 0xff, sizeof(oirq));
+#endif
+	/* Try to get a mapping from the device-tree */
+	if (of_irq_map_pci(pci_dev, &oirq)) {
+		u8 line, pin;
+
+		/* If that fails, lets fallback to what is in the config
+		 * space and map that through the default controller. We
+		 * also set the type to level low since that's what PCI
+		 * interrupts are. If your platform does differently, then
+		 * either provide a proper interrupt tree or don't use this
+		 * function.
+		 */
+		if (pci_read_config_byte(pci_dev, PCI_INTERRUPT_PIN, &pin))
+			return -1;
+		if (pin == 0)
+			return -1;
+		if (pci_read_config_byte(pci_dev, PCI_INTERRUPT_LINE, &line) ||
+		    line == 0xff || line == 0) {
+			return -1;
+		}
+		pr_debug(" No map ! Using line %d (pin %d) from PCI config\n",
+			 line, pin);
+
+		virq = irq_create_mapping(NULL, line);
+		if (virq != NO_IRQ)
+			set_irq_type(virq, IRQ_TYPE_LEVEL_LOW);
+	} else {
+		pr_debug(" Got one, spec %d cells (0x%08x 0x%08x...) on %s\n",
+			 oirq.size, oirq.specifier[0], oirq.specifier[1],
+			 oirq.controller ? oirq.controller->full_name :
+			 "<default>");
+
+		virq = irq_create_of_mapping(oirq.controller, oirq.specifier,
+					     oirq.size);
+	}
+	if (virq == NO_IRQ) {
+		pr_debug(" Failed to map !\n");
+		return -1;
+	}
+
+	pr_debug(" Mapped to linux irq %d\n", virq);
+
+	pci_dev->irq = virq;
+
+	return 0;
+}
+EXPORT_SYMBOL(pci_read_irq_line);
+
+/*
+ * Platform support for /proc/bus/pci/X/Y mmap()s,
+ * modelled on the sparc64 implementation by Dave Miller.
+ *  -- paulus.
+ */
+
+/*
+ * Adjust vm_pgoff of VMA such that it is the physical page offset
+ * corresponding to the 32-bit pci bus offset for DEV requested by the user.
+ *
+ * Basically, the user finds the base address for his device which he wishes
+ * to mmap.  They read the 32-bit value from the config space base register,
+ * add whatever PAGE_SIZE multiple offset they wish, and feed this into the
+ * offset parameter of mmap on /proc/bus/pci/XXX for that device.
+ *
+ * Returns negative error code on failure, zero on success.
+ */
+static struct resource *__pci_mmap_make_offset(struct pci_dev *dev,
+					       resource_size_t *offset,
+					       enum pci_mmap_state mmap_state)
+{
+	struct pci_controller *hose = pci_bus_to_host(dev->bus);
+	unsigned long io_offset = 0;
+	int i, res_bit;
+
+	if (hose == 0)
+		return NULL;		/* should never happen */
+
+	/* If memory, add on the PCI bridge address offset */
+	if (mmap_state == pci_mmap_mem) {
+#if 0 /* See comment in pci_resource_to_user() for why this is disabled */
+		*offset += hose->pci_mem_offset;
+#endif
+		res_bit = IORESOURCE_MEM;
+	} else {
+		io_offset = (unsigned long)hose->io_base_virt - _IO_BASE;
+		*offset += io_offset;
+		res_bit = IORESOURCE_IO;
+	}
+
+	/*
+	 * Check that the offset requested corresponds to one of the
+	 * resources of the device.
+	 */
+	for (i = 0; i <= PCI_ROM_RESOURCE; i++) {
+		struct resource *rp = &dev->resource[i];
+		int flags = rp->flags;
+
+		/* treat ROM as memory (should be already) */
+		if (i == PCI_ROM_RESOURCE)
+			flags |= IORESOURCE_MEM;
+
+		/* Active and same type? */
+		if ((flags & res_bit) == 0)
+			continue;
+
+		/* In the range of this resource? */
+		if (*offset < (rp->start & PAGE_MASK) || *offset > rp->end)
+			continue;
+
+		/* found it! construct the final physical address */
+		if (mmap_state == pci_mmap_io)
+			*offset += hose->io_base_phys - io_offset;
+		return rp;
+	}
+
+	return NULL;
+}
+
+/*
+ * Set vm_page_prot of VMA, as appropriate for this architecture, for a pci
+ * device mapping.
+ */
+static pgprot_t __pci_mmap_set_pgprot(struct pci_dev *dev, struct resource *rp,
+				      pgprot_t protection,
+				      enum pci_mmap_state mmap_state,
+				      int write_combine)
+{
+	pgprot_t prot = protection;
+
+	/* Write combine is always 0 on non-memory space mappings. On
+	 * memory space, if the user didn't pass 1, we check for a
+	 * "prefetchable" resource. This is a bit hackish, but we use
+	 * this to workaround the inability of /sysfs to provide a write
+	 * combine bit
+	 */
+	if (mmap_state != pci_mmap_mem)
+		write_combine = 0;
+	else if (write_combine == 0) {
+		if (rp->flags & IORESOURCE_PREFETCH)
+			write_combine = 1;
+	}
+
+	return pgprot_noncached(prot);
+}
+
+/*
+ * This one is used by /dev/mem and fbdev who have no clue about the
+ * PCI device, it tries to find the PCI device first and calls the
+ * above routine
+ */
+pgprot_t pci_phys_mem_access_prot(struct file *file,
+				  unsigned long pfn,
+				  unsigned long size,
+				  pgprot_t prot)
+{
+	struct pci_dev *pdev = NULL;
+	struct resource *found = NULL;
+	resource_size_t offset = ((resource_size_t)pfn) << PAGE_SHIFT;
+	int i;
+
+	if (page_is_ram(pfn))
+		return prot;
+
+	prot = pgprot_noncached(prot);
+	for_each_pci_dev(pdev) {
+		for (i = 0; i <= PCI_ROM_RESOURCE; i++) {
+			struct resource *rp = &pdev->resource[i];
+			int flags = rp->flags;
+
+			/* Active and same type? */
+			if ((flags & IORESOURCE_MEM) == 0)
+				continue;
+			/* In the range of this resource? */
+			if (offset < (rp->start & PAGE_MASK) ||
+			    offset > rp->end)
+				continue;
+			found = rp;
+			break;
+		}
+		if (found)
+			break;
+	}
+	if (found) {
+		if (found->flags & IORESOURCE_PREFETCH)
+			prot = pgprot_noncached_wc(prot);
+		pci_dev_put(pdev);
+	}
+
+	pr_debug("PCI: Non-PCI map for %llx, prot: %lx\n",
+		 (unsigned long long)offset, pgprot_val(prot));
+
+	return prot;
+}
+
+/*
+ * Perform the actual remap of the pages for a PCI device mapping, as
+ * appropriate for this architecture.  The region in the process to map
+ * is described by vm_start and vm_end members of VMA, the base physical
+ * address is found in vm_pgoff.
+ * The pci device structure is provided so that architectures may make mapping
+ * decisions on a per-device or per-bus basis.
+ *
+ * Returns a negative error code on failure, zero on success.
+ */
+int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
+			enum pci_mmap_state mmap_state, int write_combine)
+{
+	resource_size_t offset =
+		((resource_size_t)vma->vm_pgoff) << PAGE_SHIFT;
+	struct resource *rp;
+	int ret;
+
+	rp = __pci_mmap_make_offset(dev, &offset, mmap_state);
+	if (rp == NULL)
+		return -EINVAL;
+
+	vma->vm_pgoff = offset >> PAGE_SHIFT;
+	vma->vm_page_prot = __pci_mmap_set_pgprot(dev, rp,
+						  vma->vm_page_prot,
+						  mmap_state, write_combine);
+
+	ret = remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff,
+			       vma->vm_end - vma->vm_start, vma->vm_page_prot);
+
+	return ret;
+}
+
+/* This provides legacy IO read access on a bus */
+int pci_legacy_read(struct pci_bus *bus, loff_t port, u32 *val, size_t size)
+{
+	unsigned long offset;
+	struct pci_controller *hose = pci_bus_to_host(bus);
+	struct resource *rp = &hose->io_resource;
+	void __iomem *addr;
+
+	/* Check if port can be supported by that bus. We only check
+	 * the ranges of the PHB though, not the bus itself as the rules
+	 * for forwarding legacy cycles down bridges are not our problem
+	 * here. So if the host bridge supports it, we do it.
+	 */
+	offset = (unsigned long)hose->io_base_virt - _IO_BASE;
+	offset += port;
+
+	if (!(rp->flags & IORESOURCE_IO))
+		return -ENXIO;
+	if (offset < rp->start || (offset + size) > rp->end)
+		return -ENXIO;
+	addr = hose->io_base_virt + port;
+
+	switch (size) {
+	case 1:
+		*((u8 *)val) = in_8(addr);
+		return 1;
+	case 2:
+		if (port & 1)
+			return -EINVAL;
+		*((u16 *)val) = in_le16(addr);
+		return 2;
+	case 4:
+		if (port & 3)
+			return -EINVAL;
+		*((u32 *)val) = in_le32(addr);
+		return 4;
+	}
+	return -EINVAL;
+}
+
+/* This provides legacy IO write access on a bus */
+int pci_legacy_write(struct pci_bus *bus, loff_t port, u32 val, size_t size)
+{
+	unsigned long offset;
+	struct pci_controller *hose = pci_bus_to_host(bus);
+	struct resource *rp = &hose->io_resource;
+	void __iomem *addr;
+
+	/* Check if port can be supported by that bus. We only check
+	 * the ranges of the PHB though, not the bus itself as the rules
+	 * for forwarding legacy cycles down bridges are not our problem
+	 * here. So if the host bridge supports it, we do it.
+	 */
+	offset = (unsigned long)hose->io_base_virt - _IO_BASE;
+	offset += port;
+
+	if (!(rp->flags & IORESOURCE_IO))
+		return -ENXIO;
+	if (offset < rp->start || (offset + size) > rp->end)
+		return -ENXIO;
+	addr = hose->io_base_virt + port;
+
+	/* WARNING: The generic code is idiotic. It gets passed a pointer
+	 * to what can be a 1, 2 or 4 byte quantity and always reads that
+	 * as a u32, which means that we have to correct the location of
+	 * the data read within those 32 bits for size 1 and 2
+	 */
+	switch (size) {
+	case 1:
+		out_8(addr, val >> 24);
+		return 1;
+	case 2:
+		if (port & 1)
+			return -EINVAL;
+		out_le16(addr, val >> 16);
+		return 2;
+	case 4:
+		if (port & 3)
+			return -EINVAL;
+		out_le32(addr, val);
+		return 4;
+	}
+	return -EINVAL;
+}
+
+/* This provides legacy IO or memory mmap access on a bus */
+int pci_mmap_legacy_page_range(struct pci_bus *bus,
+			       struct vm_area_struct *vma,
+			       enum pci_mmap_state mmap_state)
+{
+	struct pci_controller *hose = pci_bus_to_host(bus);
+	resource_size_t offset =
+		((resource_size_t)vma->vm_pgoff) << PAGE_SHIFT;
+	resource_size_t size = vma->vm_end - vma->vm_start;
+	struct resource *rp;
+
+	pr_debug("pci_mmap_legacy_page_range(%04x:%02x, %s @%llx..%llx)\n",
+		 pci_domain_nr(bus), bus->number,
+		 mmap_state == pci_mmap_mem ? "MEM" : "IO",
+		 (unsigned long long)offset,
+		 (unsigned long long)(offset + size - 1));
+
+	if (mmap_state == pci_mmap_mem) {
+		/* Hack alert !
+		 *
+		 * Because X is lame and can fail starting if it gets an error
+		 * trying to mmap legacy_mem (instead of just moving on without
+		 * legacy memory access) we fake it here by giving it anonymous
+		 * memory, effectively behaving just like /dev/zero
+		 */
+		if ((offset + size) > hose->isa_mem_size) {
+#ifdef CONFIG_MMU
+			printk(KERN_DEBUG
+				"Process %s (pid:%d) mapped non-existing PCI"
+				"legacy memory for 0%04x:%02x\n",
+				current->comm, current->pid, pci_domain_nr(bus),
+								bus->number);
+#endif
+			if (vma->vm_flags & VM_SHARED)
+				return shmem_zero_setup(vma);
+			return 0;
+		}
+		offset += hose->isa_mem_phys;
+	} else {
+		unsigned long io_offset = (unsigned long)hose->io_base_virt - \
+								_IO_BASE;
+		unsigned long roffset = offset + io_offset;
+		rp = &hose->io_resource;
+		if (!(rp->flags & IORESOURCE_IO))
+			return -ENXIO;
+		if (roffset < rp->start || (roffset + size) > rp->end)
+			return -ENXIO;
+		offset += hose->io_base_phys;
+	}
+	pr_debug(" -> mapping phys %llx\n", (unsigned long long)offset);
+
+	vma->vm_pgoff = offset >> PAGE_SHIFT;
+	vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
+	return remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff,
+			       vma->vm_end - vma->vm_start,
+			       vma->vm_page_prot);
+}
+
+void pci_resource_to_user(const struct pci_dev *dev, int bar,
+			  const struct resource *rsrc,
+			  resource_size_t *start, resource_size_t *end)
+{
+	struct pci_controller *hose = pci_bus_to_host(dev->bus);
+	resource_size_t offset = 0;
+
+	if (hose == NULL)
+		return;
+
+	if (rsrc->flags & IORESOURCE_IO)
+		offset = (unsigned long)hose->io_base_virt - _IO_BASE;
+
+	/* We pass a fully fixed up address to userland for MMIO instead of
+	 * a BAR value because X is lame and expects to be able to use that
+	 * to pass to /dev/mem !
+	 *
+	 * That means that we'll have potentially 64 bits values where some
+	 * userland apps only expect 32 (like X itself since it thinks only
+	 * Sparc has 64 bits MMIO) but if we don't do that, we break it on
+	 * 32 bits CHRPs :-(
+	 *
+	 * Hopefully, the sysfs insterface is immune to that gunk. Once X
+	 * has been fixed (and the fix spread enough), we can re-enable the
+	 * 2 lines below and pass down a BAR value to userland. In that case
+	 * we'll also have to re-enable the matching code in
+	 * __pci_mmap_make_offset().
+	 *
+	 * BenH.
+	 */
+#if 0
+	else if (rsrc->flags & IORESOURCE_MEM)
+		offset = hose->pci_mem_offset;
+#endif
+
+	*start = rsrc->start - offset;
+	*end = rsrc->end - offset;
+}
+
+/**
+ * pci_process_bridge_OF_ranges - Parse PCI bridge resources from device tree
+ * @hose: newly allocated pci_controller to be setup
+ * @dev: device node of the host bridge
+ * @primary: set if primary bus (32 bits only, soon to be deprecated)
+ *
+ * This function will parse the "ranges" property of a PCI host bridge device
+ * node and setup the resource mapping of a pci controller based on its
+ * content.
+ *
+ * Life would be boring if it wasn't for a few issues that we have to deal
+ * with here:
+ *
+ *   - We can only cope with one IO space range and up to 3 Memory space
+ *     ranges. However, some machines (thanks Apple !) tend to split their
+ *     space into lots of small contiguous ranges. So we have to coalesce.
+ *
+ *   - We can only cope with all memory ranges having the same offset
+ *     between CPU addresses and PCI addresses. Unfortunately, some bridges
+ *     are setup for a large 1:1 mapping along with a small "window" which
+ *     maps PCI address 0 to some arbitrary high address of the CPU space in
+ *     order to give access to the ISA memory hole.
+ *     The way out of here that I've chosen for now is to always set the
+ *     offset based on the first resource found, then override it if we
+ *     have a different offset and the previous was set by an ISA hole.
+ *
+ *   - Some busses have IO space not starting at 0, which causes trouble with
+ *     the way we do our IO resource renumbering. The code somewhat deals with
+ *     it for 64 bits but I would expect problems on 32 bits.
+ *
+ *   - Some 32 bits platforms such as 4xx can have physical space larger than
+ *     32 bits so we need to use 64 bits values for the parsing
+ */
+void __devinit pci_process_bridge_OF_ranges(struct pci_controller *hose,
+					    struct device_node *dev,
+					    int primary)
+{
+	const u32 *ranges;
+	int rlen;
+	int pna = of_n_addr_cells(dev);
+	int np = pna + 5;
+	int memno = 0, isa_hole = -1;
+	u32 pci_space;
+	unsigned long long pci_addr, cpu_addr, pci_next, cpu_next, size;
+	unsigned long long isa_mb = 0;
+	struct resource *res;
+
+	printk(KERN_INFO "PCI host bridge %s %s ranges:\n",
+	       dev->full_name, primary ? "(primary)" : "");
+
+	/* Get ranges property */
+	ranges = of_get_property(dev, "ranges", &rlen);
+	if (ranges == NULL)
+		return;
+
+	/* Parse it */
+	pr_debug("Parsing ranges property...\n");
+	while ((rlen -= np * 4) >= 0) {
+		/* Read next ranges element */
+		pci_space = ranges[0];
+		pci_addr = of_read_number(ranges + 1, 2);
+		cpu_addr = of_translate_address(dev, ranges + 3);
+		size = of_read_number(ranges + pna + 3, 2);
+
+		pr_debug("pci_space: 0x%08x pci_addr:0x%016llx "
+				"cpu_addr:0x%016llx size:0x%016llx\n",
+					pci_space, pci_addr, cpu_addr, size);
+
+		ranges += np;
+
+		/* If we failed translation or got a zero-sized region
+		 * (some FW try to feed us with non sensical zero sized regions
+		 * such as power3 which look like some kind of attempt
+		 * at exposing the VGA memory hole)
+		 */
+		if (cpu_addr == OF_BAD_ADDR || size == 0)
+			continue;
+
+		/* Now consume following elements while they are contiguous */
+		for (; rlen >= np * sizeof(u32);
+		     ranges += np, rlen -= np * 4) {
+			if (ranges[0] != pci_space)
+				break;
+			pci_next = of_read_number(ranges + 1, 2);
+			cpu_next = of_translate_address(dev, ranges + 3);
+			if (pci_next != pci_addr + size ||
+			    cpu_next != cpu_addr + size)
+				break;
+			size += of_read_number(ranges + pna + 3, 2);
+		}
+
+		/* Act based on address space type */
+		res = NULL;
+		switch ((pci_space >> 24) & 0x3) {
+		case 1:		/* PCI IO space */
+			printk(KERN_INFO
+			       "  IO 0x%016llx..0x%016llx -> 0x%016llx\n",
+			       cpu_addr, cpu_addr + size - 1, pci_addr);
+
+			/* We support only one IO range */
+			if (hose->pci_io_size) {
+				printk(KERN_INFO
+				       " \\--> Skipped (too many) !\n");
+				continue;
+			}
+			/* On 32 bits, limit I/O space to 16MB */
+			if (size > 0x01000000)
+				size = 0x01000000;
+
+			/* 32 bits needs to map IOs here */
+			hose->io_base_virt = ioremap(cpu_addr, size);
+
+			/* Expect trouble if pci_addr is not 0 */
+			if (primary)
+				isa_io_base =
+					(unsigned long)hose->io_base_virt;
+			/* pci_io_size and io_base_phys always represent IO
+			 * space starting at 0 so we factor in pci_addr
+			 */
+			hose->pci_io_size = pci_addr + size;
+			hose->io_base_phys = cpu_addr - pci_addr;
+
+			/* Build resource */
+			res = &hose->io_resource;
+			res->flags = IORESOURCE_IO;
+			res->start = pci_addr;
+			break;
+		case 2:		/* PCI Memory space */
+		case 3:		/* PCI 64 bits Memory space */
+			printk(KERN_INFO
+			       " MEM 0x%016llx..0x%016llx -> 0x%016llx %s\n",
+			       cpu_addr, cpu_addr + size - 1, pci_addr,
+			       (pci_space & 0x40000000) ? "Prefetch" : "");
+
+			/* We support only 3 memory ranges */
+			if (memno >= 3) {
+				printk(KERN_INFO
+				       " \\--> Skipped (too many) !\n");
+				continue;
+			}
+			/* Handles ISA memory hole space here */
+			if (pci_addr == 0) {
+				isa_mb = cpu_addr;
+				isa_hole = memno;
+				if (primary || isa_mem_base == 0)
+					isa_mem_base = cpu_addr;
+				hose->isa_mem_phys = cpu_addr;
+				hose->isa_mem_size = size;
+			}
+
+			/* We get the PCI/Mem offset from the first range or
+			 * the, current one if the offset came from an ISA
+			 * hole. If they don't match, bugger.
+			 */
+			if (memno == 0 ||
+			    (isa_hole >= 0 && pci_addr != 0 &&
+			     hose->pci_mem_offset == isa_mb))
+				hose->pci_mem_offset = cpu_addr - pci_addr;
+			else if (pci_addr != 0 &&
+				 hose->pci_mem_offset != cpu_addr - pci_addr) {
+				printk(KERN_INFO
+				       " \\--> Skipped (offset mismatch) !\n");
+				continue;
+			}
+
+			/* Build resource */
+			res = &hose->mem_resources[memno++];
+			res->flags = IORESOURCE_MEM;
+			if (pci_space & 0x40000000)
+				res->flags |= IORESOURCE_PREFETCH;
+			res->start = cpu_addr;
+			break;
+		}
+		if (res != NULL) {
+			res->name = dev->full_name;
+			res->end = res->start + size - 1;
+			res->parent = NULL;
+			res->sibling = NULL;
+			res->child = NULL;
+		}
+	}
+
+	/* If there's an ISA hole and the pci_mem_offset is -not- matching
+	 * the ISA hole offset, then we need to remove the ISA hole from
+	 * the resource list for that brige
+	 */
+	if (isa_hole >= 0 && hose->pci_mem_offset != isa_mb) {
+		unsigned int next = isa_hole + 1;
+		printk(KERN_INFO " Removing ISA hole at 0x%016llx\n", isa_mb);
+		if (next < memno)
+			memmove(&hose->mem_resources[isa_hole],
+				&hose->mem_resources[next],
+				sizeof(struct resource) * (memno - next));
+		hose->mem_resources[--memno].flags = 0;
+	}
+}
+
+/* Decide whether to display the domain number in /proc */
+int pci_proc_domain(struct pci_bus *bus)
+{
+	struct pci_controller *hose = pci_bus_to_host(bus);
+
+	if (!(pci_flags & PCI_ENABLE_PROC_DOMAINS))
+		return 0;
+	if (pci_flags & PCI_COMPAT_DOMAIN_0)
+		return hose->global_number != 0;
+	return 1;
+}
+
+void pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region,
+			     struct resource *res)
+{
+	resource_size_t offset = 0, mask = (resource_size_t)-1;
+	struct pci_controller *hose = pci_bus_to_host(dev->bus);
+
+	if (!hose)
+		return;
+	if (res->flags & IORESOURCE_IO) {
+		offset = (unsigned long)hose->io_base_virt - _IO_BASE;
+		mask = 0xffffffffu;
+	} else if (res->flags & IORESOURCE_MEM)
+		offset = hose->pci_mem_offset;
+
+	region->start = (res->start - offset) & mask;
+	region->end = (res->end - offset) & mask;
+}
+EXPORT_SYMBOL(pcibios_resource_to_bus);
+
+void pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res,
+			     struct pci_bus_region *region)
+{
+	resource_size_t offset = 0, mask = (resource_size_t)-1;
+	struct pci_controller *hose = pci_bus_to_host(dev->bus);
+
+	if (!hose)
+		return;
+	if (res->flags & IORESOURCE_IO) {
+		offset = (unsigned long)hose->io_base_virt - _IO_BASE;
+		mask = 0xffffffffu;
+	} else if (res->flags & IORESOURCE_MEM)
+		offset = hose->pci_mem_offset;
+	res->start = (region->start + offset) & mask;
+	res->end = (region->end + offset) & mask;
+}
+EXPORT_SYMBOL(pcibios_bus_to_resource);
+
+/* Fixup a bus resource into a linux resource */
+static void __devinit fixup_resource(struct resource *res, struct pci_dev *dev)
+{
+	struct pci_controller *hose = pci_bus_to_host(dev->bus);
+	resource_size_t offset = 0, mask = (resource_size_t)-1;
+
+	if (res->flags & IORESOURCE_IO) {
+		offset = (unsigned long)hose->io_base_virt - _IO_BASE;
+		mask = 0xffffffffu;
+	} else if (res->flags & IORESOURCE_MEM)
+		offset = hose->pci_mem_offset;
+
+	res->start = (res->start + offset) & mask;
+	res->end = (res->end + offset) & mask;
+}
+
+/* This header fixup will do the resource fixup for all devices as they are
+ * probed, but not for bridge ranges
+ */
+static void __devinit pcibios_fixup_resources(struct pci_dev *dev)
+{
+	struct pci_controller *hose = pci_bus_to_host(dev->bus);
+	int i;
+
+	if (!hose) {
+		printk(KERN_ERR "No host bridge for PCI dev %s !\n",
+		       pci_name(dev));
+		return;
+	}
+	for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
+		struct resource *res = dev->resource + i;
+		if (!res->flags)
+			continue;
+		/* On platforms that have PCI_PROBE_ONLY set, we don't
+		 * consider 0 as an unassigned BAR value. It's technically
+		 * a valid value, but linux doesn't like it... so when we can
+		 * re-assign things, we do so, but if we can't, we keep it
+		 * around and hope for the best...
+		 */
+		if (res->start == 0 && !(pci_flags & PCI_PROBE_ONLY)) {
+			pr_debug("PCI:%s Resource %d %016llx-%016llx [%x]" \
+							"is unassigned\n",
+				 pci_name(dev), i,
+				 (unsigned long long)res->start,
+				 (unsigned long long)res->end,
+				 (unsigned int)res->flags);
+			res->end -= res->start;
+			res->start = 0;
+			res->flags |= IORESOURCE_UNSET;
+			continue;
+		}
+
+		pr_debug("PCI:%s Resource %d %016llx-%016llx [%x] fixup...\n",
+			 pci_name(dev), i,
+			 (unsigned long long)res->start,\
+			 (unsigned long long)res->end,
+			 (unsigned int)res->flags);
+
+		fixup_resource(res, dev);
+
+		pr_debug("PCI:%s            %016llx-%016llx\n",
+			 pci_name(dev),
+			 (unsigned long long)res->start,
+			 (unsigned long long)res->end);
+	}
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pcibios_fixup_resources);
+
+/* This function tries to figure out if a bridge resource has been initialized
+ * by the firmware or not. It doesn't have to be absolutely bullet proof, but
+ * things go more smoothly when it gets it right. It should covers cases such
+ * as Apple "closed" bridge resources and bare-metal pSeries unassigned bridges
+ */
+static int __devinit pcibios_uninitialized_bridge_resource(struct pci_bus *bus,
+							   struct resource *res)
+{
+	struct pci_controller *hose = pci_bus_to_host(bus);
+	struct pci_dev *dev = bus->self;
+	resource_size_t offset;
+	u16 command;
+	int i;
+
+	/* We don't do anything if PCI_PROBE_ONLY is set */
+	if (pci_flags & PCI_PROBE_ONLY)
+		return 0;
+
+	/* Job is a bit different between memory and IO */
+	if (res->flags & IORESOURCE_MEM) {
+		/* If the BAR is non-0 (res != pci_mem_offset) then it's
+		 * probably been initialized by somebody
+		 */
+		if (res->start != hose->pci_mem_offset)
+			return 0;
+
+		/* The BAR is 0, let's check if memory decoding is enabled on
+		 * the bridge. If not, we consider it unassigned
+		 */
+		pci_read_config_word(dev, PCI_COMMAND, &command);
+		if ((command & PCI_COMMAND_MEMORY) == 0)
+			return 1;
+
+		/* Memory decoding is enabled and the BAR is 0. If any of
+		 * the bridge resources covers that starting address (0 then
+		 * it's good enough for us for memory
+		 */
+		for (i = 0; i < 3; i++) {
+			if ((hose->mem_resources[i].flags & IORESOURCE_MEM) &&
+			   hose->mem_resources[i].start == hose->pci_mem_offset)
+				return 0;
+		}
+
+		/* Well, it starts at 0 and we know it will collide so we may as
+		 * well consider it as unassigned. That covers the Apple case.
+		 */
+		return 1;
+	} else {
+		/* If the BAR is non-0, then we consider it assigned */
+		offset = (unsigned long)hose->io_base_virt - _IO_BASE;
+		if (((res->start - offset) & 0xfffffffful) != 0)
+			return 0;
+
+		/* Here, we are a bit different than memory as typically IO
+		 * space starting at low addresses -is- valid. What we do
+		 * instead if that we consider as unassigned anything that
+		 * doesn't have IO enabled in the PCI command register,
+		 * and that's it.
+		 */
+		pci_read_config_word(dev, PCI_COMMAND, &command);
+		if (command & PCI_COMMAND_IO)
+			return 0;
+
+		/* It's starting at 0 and IO is disabled in the bridge, consider
+		 * it unassigned
+		 */
+		return 1;
+	}
+}
+
+/* Fixup resources of a PCI<->PCI bridge */
+static void __devinit pcibios_fixup_bridge(struct pci_bus *bus)
+{
+	struct resource *res;
+	int i;
+
+	struct pci_dev *dev = bus->self;
+
+	for (i = 0; i < PCI_BUS_NUM_RESOURCES; ++i) {
+		res = bus->resource[i];
+		if (!res)
+			continue;
+		if (!res->flags)
+			continue;
+		if (i >= 3 && bus->self->transparent)
+			continue;
+
+		pr_debug("PCI:%s Bus rsrc %d %016llx-%016llx [%x] fixup...\n",
+			 pci_name(dev), i,
+			 (unsigned long long)res->start,\
+			 (unsigned long long)res->end,
+			 (unsigned int)res->flags);
+
+		/* Perform fixup */
+		fixup_resource(res, dev);
+
+		/* Try to detect uninitialized P2P bridge resources,
+		 * and clear them out so they get re-assigned later
+		 */
+		if (pcibios_uninitialized_bridge_resource(bus, res)) {
+			res->flags = 0;
+			pr_debug("PCI:%s            (unassigned)\n",
+								pci_name(dev));
+		} else {
+			pr_debug("PCI:%s            %016llx-%016llx\n",
+				 pci_name(dev),
+				 (unsigned long long)res->start,
+				 (unsigned long long)res->end);
+		}
+	}
+}
+
+void __devinit pcibios_setup_bus_self(struct pci_bus *bus)
+{
+	/* Fix up the bus resources for P2P bridges */
+	if (bus->self != NULL)
+		pcibios_fixup_bridge(bus);
+}
+
+void __devinit pcibios_setup_bus_devices(struct pci_bus *bus)
+{
+	struct pci_dev *dev;
+
+	pr_debug("PCI: Fixup bus devices %d (%s)\n",
+		 bus->number, bus->self ? pci_name(bus->self) : "PHB");
+
+	list_for_each_entry(dev, &bus->devices, bus_list) {
+		struct dev_archdata *sd = &dev->dev.archdata;
+
+		/* Setup OF node pointer in archdata */
+		sd->of_node = pci_device_to_OF_node(dev);
+
+		/* Fixup NUMA node as it may not be setup yet by the generic
+		 * code and is needed by the DMA init
+		 */
+		set_dev_node(&dev->dev, pcibus_to_node(dev->bus));
+
+		/* Hook up default DMA ops */
+		sd->dma_ops = pci_dma_ops;
+		sd->dma_data = (void *)PCI_DRAM_OFFSET;
+
+		/* Read default IRQs and fixup if necessary */
+		pci_read_irq_line(dev);
+	}
+}
+
+void __devinit pcibios_fixup_bus(struct pci_bus *bus)
+{
+	/* When called from the generic PCI probe, read PCI<->PCI bridge
+	 * bases. This is -not- called when generating the PCI tree from
+	 * the OF device-tree.
+	 */
+	if (bus->self != NULL)
+		pci_read_bridge_bases(bus);
+
+	/* Now fixup the bus bus */
+	pcibios_setup_bus_self(bus);
+
+	/* Now fixup devices on that bus */
+	pcibios_setup_bus_devices(bus);
+}
+EXPORT_SYMBOL(pcibios_fixup_bus);
+
+static int skip_isa_ioresource_align(struct pci_dev *dev)
+{
+	if ((pci_flags & PCI_CAN_SKIP_ISA_ALIGN) &&
+	    !(dev->bus->bridge_ctl & PCI_BRIDGE_CTL_ISA))
+		return 1;
+	return 0;
+}
+
+/*
+ * We need to avoid collisions with `mirrored' VGA ports
+ * and other strange ISA hardware, so we always want the
+ * addresses to be allocated in the 0x000-0x0ff region
+ * modulo 0x400.
+ *
+ * Why? Because some silly external IO cards only decode
+ * the low 10 bits of the IO address. The 0x00-0xff region
+ * is reserved for motherboard devices that decode all 16
+ * bits, so it's ok to allocate at, say, 0x2800-0x28ff,
+ * but we want to try to avoid allocating at 0x2900-0x2bff
+ * which might have be mirrored at 0x0100-0x03ff..
+ */
+void pcibios_align_resource(void *data, struct resource *res,
+				resource_size_t size, resource_size_t align)
+{
+	struct pci_dev *dev = data;
+
+	if (res->flags & IORESOURCE_IO) {
+		resource_size_t start = res->start;
+
+		if (skip_isa_ioresource_align(dev))
+			return;
+		if (start & 0x300) {
+			start = (start + 0x3ff) & ~0x3ff;
+			res->start = start;
+		}
+	}
+}
+EXPORT_SYMBOL(pcibios_align_resource);
+
+/*
+ * Reparent resource children of pr that conflict with res
+ * under res, and make res replace those children.
+ */
+static int __init reparent_resources(struct resource *parent,
+				     struct resource *res)
+{
+	struct resource *p, **pp;
+	struct resource **firstpp = NULL;
+
+	for (pp = &parent->child; (p = *pp) != NULL; pp = &p->sibling) {
+		if (p->end < res->start)
+			continue;
+		if (res->end < p->start)
+			break;
+		if (p->start < res->start || p->end > res->end)
+			return -1;	/* not completely contained */
+		if (firstpp == NULL)
+			firstpp = pp;
+	}
+	if (firstpp == NULL)
+		return -1;	/* didn't find any conflicting entries? */
+	res->parent = parent;
+	res->child = *firstpp;
+	res->sibling = *pp;
+	*firstpp = res;
+	*pp = NULL;
+	for (p = res->child; p != NULL; p = p->sibling) {
+		p->parent = res;
+		pr_debug("PCI: Reparented %s [%llx..%llx] under %s\n",
+			 p->name,
+			 (unsigned long long)p->start,
+			 (unsigned long long)p->end, res->name);
+	}
+	return 0;
+}
+
+/*
+ *  Handle resources of PCI devices.  If the world were perfect, we could
+ *  just allocate all the resource regions and do nothing more.  It isn't.
+ *  On the other hand, we cannot just re-allocate all devices, as it would
+ *  require us to know lots of host bridge internals.  So we attempt to
+ *  keep as much of the original configuration as possible, but tweak it
+ *  when it's found to be wrong.
+ *
+ *  Known BIOS problems we have to work around:
+ *	- I/O or memory regions not configured
+ *	- regions configured, but not enabled in the command register
+ *	- bogus I/O addresses above 64K used
+ *	- expansion ROMs left enabled (this may sound harmless, but given
+ *	  the fact the PCI specs explicitly allow address decoders to be
+ *	  shared between expansion ROMs and other resource regions, it's
+ *	  at least dangerous)
+ *
+ *  Our solution:
+ *	(1) Allocate resources for all buses behind PCI-to-PCI bridges.
+ *	    This gives us fixed barriers on where we can allocate.
+ *	(2) Allocate resources for all enabled devices.  If there is
+ *	    a collision, just mark the resource as unallocated. Also
+ *	    disable expansion ROMs during this step.
+ *	(3) Try to allocate resources for disabled devices.  If the
+ *	    resources were assigned correctly, everything goes well,
+ *	    if they weren't, they won't disturb allocation of other
+ *	    resources.
+ *	(4) Assign new addresses to resources which were either
+ *	    not configured at all or misconfigured.  If explicitly
+ *	    requested by the user, configure expansion ROM address
+ *	    as well.
+ */
+
+void pcibios_allocate_bus_resources(struct pci_bus *bus)
+{
+	struct pci_bus *b;
+	int i;
+	struct resource *res, *pr;
+
+	pr_debug("PCI: Allocating bus resources for %04x:%02x...\n",
+		 pci_domain_nr(bus), bus->number);
+
+	for (i = 0; i < PCI_BUS_NUM_RESOURCES; ++i) {
+		res = bus->resource[i];
+		if (!res || !res->flags
+		    || res->start > res->end || res->parent)
+			continue;
+		if (bus->parent == NULL)
+			pr = (res->flags & IORESOURCE_IO) ?
+				&ioport_resource : &iomem_resource;
+		else {
+			/* Don't bother with non-root busses when
+			 * re-assigning all resources. We clear the
+			 * resource flags as if they were colliding
+			 * and as such ensure proper re-allocation
+			 * later.
+			 */
+			if (pci_flags & PCI_REASSIGN_ALL_RSRC)
+				goto clear_resource;
+			pr = pci_find_parent_resource(bus->self, res);
+			if (pr == res) {
+				/* this happens when the generic PCI
+				 * code (wrongly) decides that this
+				 * bridge is transparent  -- paulus
+				 */
+				continue;
+			}
+		}
+
+		pr_debug("PCI: %s (bus %d) bridge rsrc %d: %016llx-%016llx "
+			 "[0x%x], parent %p (%s)\n",
+			 bus->self ? pci_name(bus->self) : "PHB",
+			 bus->number, i,
+			 (unsigned long long)res->start,
+			 (unsigned long long)res->end,
+			 (unsigned int)res->flags,
+			 pr, (pr && pr->name) ? pr->name : "nil");
+
+		if (pr && !(pr->flags & IORESOURCE_UNSET)) {
+			if (request_resource(pr, res) == 0)
+				continue;
+			/*
+			 * Must be a conflict with an existing entry.
+			 * Move that entry (or entries) under the
+			 * bridge resource and try again.
+			 */
+			if (reparent_resources(pr, res) == 0)
+				continue;
+		}
+		printk(KERN_WARNING "PCI: Cannot allocate resource region "
+		       "%d of PCI bridge %d, will remap\n", i, bus->number);
+clear_resource:
+		res->flags = 0;
+	}
+
+	list_for_each_entry(b, &bus->children, node)
+		pcibios_allocate_bus_resources(b);
+}
+
+static inline void __devinit alloc_resource(struct pci_dev *dev, int idx)
+{
+	struct resource *pr, *r = &dev->resource[idx];
+
+	pr_debug("PCI: Allocating %s: Resource %d: %016llx..%016llx [%x]\n",
+		 pci_name(dev), idx,
+		 (unsigned long long)r->start,
+		 (unsigned long long)r->end,
+		 (unsigned int)r->flags);
+
+	pr = pci_find_parent_resource(dev, r);
+	if (!pr || (pr->flags & IORESOURCE_UNSET) ||
+	    request_resource(pr, r) < 0) {
+		printk(KERN_WARNING "PCI: Cannot allocate resource region %d"
+		       " of device %s, will remap\n", idx, pci_name(dev));
+		if (pr)
+			pr_debug("PCI:  parent is %p: %016llx-%016llx [%x]\n",
+				 pr,
+				 (unsigned long long)pr->start,
+				 (unsigned long long)pr->end,
+				 (unsigned int)pr->flags);
+		/* We'll assign a new address later */
+		r->flags |= IORESOURCE_UNSET;
+		r->end -= r->start;
+		r->start = 0;
+	}
+}
+
+static void __init pcibios_allocate_resources(int pass)
+{
+	struct pci_dev *dev = NULL;
+	int idx, disabled;
+	u16 command;
+	struct resource *r;
+
+	for_each_pci_dev(dev) {
+		pci_read_config_word(dev, PCI_COMMAND, &command);
+		for (idx = 0; idx <= PCI_ROM_RESOURCE; idx++) {
+			r = &dev->resource[idx];
+			if (r->parent)		/* Already allocated */
+				continue;
+			if (!r->flags || (r->flags & IORESOURCE_UNSET))
+				continue;	/* Not assigned at all */
+			/* We only allocate ROMs on pass 1 just in case they
+			 * have been screwed up by firmware
+			 */
+			if (idx == PCI_ROM_RESOURCE)
+				disabled = 1;
+			if (r->flags & IORESOURCE_IO)
+				disabled = !(command & PCI_COMMAND_IO);
+			else
+				disabled = !(command & PCI_COMMAND_MEMORY);
+			if (pass == disabled)
+				alloc_resource(dev, idx);
+		}
+		if (pass)
+			continue;
+		r = &dev->resource[PCI_ROM_RESOURCE];
+		if (r->flags) {
+			/* Turn the ROM off, leave the resource region,
+			 * but keep it unregistered.
+			 */
+			u32 reg;
+			pci_read_config_dword(dev, dev->rom_base_reg, &reg);
+			if (reg & PCI_ROM_ADDRESS_ENABLE) {
+				pr_debug("PCI: Switching off ROM of %s\n",
+					 pci_name(dev));
+				r->flags &= ~IORESOURCE_ROM_ENABLE;
+				pci_write_config_dword(dev, dev->rom_base_reg,
+						reg & ~PCI_ROM_ADDRESS_ENABLE);
+			}
+		}
+	}
+}
+
+static void __init pcibios_reserve_legacy_regions(struct pci_bus *bus)
+{
+	struct pci_controller *hose = pci_bus_to_host(bus);
+	resource_size_t	offset;
+	struct resource *res, *pres;
+	int i;
+
+	pr_debug("Reserving legacy ranges for domain %04x\n",
+							pci_domain_nr(bus));
+
+	/* Check for IO */
+	if (!(hose->io_resource.flags & IORESOURCE_IO))
+		goto no_io;
+	offset = (unsigned long)hose->io_base_virt - _IO_BASE;
+	res = kzalloc(sizeof(struct resource), GFP_KERNEL);
+	BUG_ON(res == NULL);
+	res->name = "Legacy IO";
+	res->flags = IORESOURCE_IO;
+	res->start = offset;
+	res->end = (offset + 0xfff) & 0xfffffffful;
+	pr_debug("Candidate legacy IO: %pR\n", res);
+	if (request_resource(&hose->io_resource, res)) {
+		printk(KERN_DEBUG
+		       "PCI %04x:%02x Cannot reserve Legacy IO %pR\n",
+		       pci_domain_nr(bus), bus->number, res);
+		kfree(res);
+	}
+
+ no_io:
+	/* Check for memory */
+	offset = hose->pci_mem_offset;
+	pr_debug("hose mem offset: %016llx\n", (unsigned long long)offset);
+	for (i = 0; i < 3; i++) {
+		pres = &hose->mem_resources[i];
+		if (!(pres->flags & IORESOURCE_MEM))
+			continue;
+		pr_debug("hose mem res: %pR\n", pres);
+		if ((pres->start - offset) <= 0xa0000 &&
+		    (pres->end - offset) >= 0xbffff)
+			break;
+	}
+	if (i >= 3)
+		return;
+	res = kzalloc(sizeof(struct resource), GFP_KERNEL);
+	BUG_ON(res == NULL);
+	res->name = "Legacy VGA memory";
+	res->flags = IORESOURCE_MEM;
+	res->start = 0xa0000 + offset;
+	res->end = 0xbffff + offset;
+	pr_debug("Candidate VGA memory: %pR\n", res);
+	if (request_resource(pres, res)) {
+		printk(KERN_DEBUG
+		       "PCI %04x:%02x Cannot reserve VGA memory %pR\n",
+		       pci_domain_nr(bus), bus->number, res);
+		kfree(res);
+	}
+}
+
+void __init pcibios_resource_survey(void)
+{
+	struct pci_bus *b;
+
+	/* Allocate and assign resources. If we re-assign everything, then
+	 * we skip the allocate phase
+	 */
+	list_for_each_entry(b, &pci_root_buses, node)
+		pcibios_allocate_bus_resources(b);
+
+	if (!(pci_flags & PCI_REASSIGN_ALL_RSRC)) {
+		pcibios_allocate_resources(0);
+		pcibios_allocate_resources(1);
+	}
+
+	/* Before we start assigning unassigned resource, we try to reserve
+	 * the low IO area and the VGA memory area if they intersect the
+	 * bus available resources to avoid allocating things on top of them
+	 */
+	if (!(pci_flags & PCI_PROBE_ONLY)) {
+		list_for_each_entry(b, &pci_root_buses, node)
+			pcibios_reserve_legacy_regions(b);
+	}
+
+	/* Now, if the platform didn't decide to blindly trust the firmware,
+	 * we proceed to assigning things that were left unassigned
+	 */
+	if (!(pci_flags & PCI_PROBE_ONLY)) {
+		pr_debug("PCI: Assigning unassigned resources...\n");
+		pci_assign_unassigned_resources();
+	}
+}
+
+#ifdef CONFIG_HOTPLUG
+
+/* This is used by the PCI hotplug driver to allocate resource
+ * of newly plugged busses. We can try to consolidate with the
+ * rest of the code later, for now, keep it as-is as our main
+ * resource allocation function doesn't deal with sub-trees yet.
+ */
+void __devinit pcibios_claim_one_bus(struct pci_bus *bus)
+{
+	struct pci_dev *dev;
+	struct pci_bus *child_bus;
+
+	list_for_each_entry(dev, &bus->devices, bus_list) {
+		int i;
+
+		for (i = 0; i < PCI_NUM_RESOURCES; i++) {
+			struct resource *r = &dev->resource[i];
+
+			if (r->parent || !r->start || !r->flags)
+				continue;
+
+			pr_debug("PCI: Claiming %s: "
+				 "Resource %d: %016llx..%016llx [%x]\n",
+				 pci_name(dev), i,
+				 (unsigned long long)r->start,
+				 (unsigned long long)r->end,
+				 (unsigned int)r->flags);
+
+			pci_claim_resource(dev, i);
+		}
+	}
+
+	list_for_each_entry(child_bus, &bus->children, node)
+		pcibios_claim_one_bus(child_bus);
+}
+EXPORT_SYMBOL_GPL(pcibios_claim_one_bus);
+
+
+/* pcibios_finish_adding_to_bus
+ *
+ * This is to be called by the hotplug code after devices have been
+ * added to a bus, this include calling it for a PHB that is just
+ * being added
+ */
+void pcibios_finish_adding_to_bus(struct pci_bus *bus)
+{
+	pr_debug("PCI: Finishing adding to hotplug bus %04x:%02x\n",
+		 pci_domain_nr(bus), bus->number);
+
+	/* Allocate bus and devices resources */
+	pcibios_allocate_bus_resources(bus);
+	pcibios_claim_one_bus(bus);
+
+	/* Add new devices to global lists.  Register in proc, sysfs. */
+	pci_bus_add_devices(bus);
+
+	/* Fixup EEH */
+	eeh_add_device_tree_late(bus);
+}
+EXPORT_SYMBOL_GPL(pcibios_finish_adding_to_bus);
+
+#endif /* CONFIG_HOTPLUG */
+
+int pcibios_enable_device(struct pci_dev *dev, int mask)
+{
+	return pci_enable_resources(dev, mask);
+}
+
+void __devinit pcibios_setup_phb_resources(struct pci_controller *hose)
+{
+	struct pci_bus *bus = hose->bus;
+	struct resource *res;
+	int i;
+
+	/* Hookup PHB IO resource */
+	bus->resource[0] = res = &hose->io_resource;
+
+	if (!res->flags) {
+		printk(KERN_WARNING "PCI: I/O resource not set for host"
+		       " bridge %s (domain %d)\n",
+		       hose->dn->full_name, hose->global_number);
+		/* Workaround for lack of IO resource only on 32-bit */
+		res->start = (unsigned long)hose->io_base_virt - isa_io_base;
+		res->end = res->start + IO_SPACE_LIMIT;
+		res->flags = IORESOURCE_IO;
+	}
+
+	pr_debug("PCI: PHB IO resource    = %016llx-%016llx [%lx]\n",
+		 (unsigned long long)res->start,
+		 (unsigned long long)res->end,
+		 (unsigned long)res->flags);
+
+	/* Hookup PHB Memory resources */
+	for (i = 0; i < 3; ++i) {
+		res = &hose->mem_resources[i];
+		if (!res->flags) {
+			if (i > 0)
+				continue;
+			printk(KERN_ERR "PCI: Memory resource 0 not set for "
+			       "host bridge %s (domain %d)\n",
+			       hose->dn->full_name, hose->global_number);
+
+			/* Workaround for lack of MEM resource only on 32-bit */
+			res->start = hose->pci_mem_offset;
+			res->end = (resource_size_t)-1LL;
+			res->flags = IORESOURCE_MEM;
+
+		}
+		bus->resource[i+1] = res;
+
+		pr_debug("PCI: PHB MEM resource %d = %016llx-%016llx [%lx]\n",
+			i, (unsigned long long)res->start,
+			(unsigned long long)res->end,
+			(unsigned long)res->flags);
+	}
+
+	pr_debug("PCI: PHB MEM offset     = %016llx\n",
+		 (unsigned long long)hose->pci_mem_offset);
+	pr_debug("PCI: PHB IO  offset     = %08lx\n",
+		 (unsigned long)hose->io_base_virt - _IO_BASE);
+}
+
+/*
+ * Null PCI config access functions, for the case when we can't
+ * find a hose.
+ */
+#define NULL_PCI_OP(rw, size, type)					\
+static int								\
+null_##rw##_config_##size(struct pci_dev *dev, int offset, type val)	\
+{									\
+	return PCIBIOS_DEVICE_NOT_FOUND;				\
+}
+
+static int
+null_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
+		 int len, u32 *val)
+{
+	return PCIBIOS_DEVICE_NOT_FOUND;
+}
+
+static int
+null_write_config(struct pci_bus *bus, unsigned int devfn, int offset,
+		  int len, u32 val)
+{
+	return PCIBIOS_DEVICE_NOT_FOUND;
+}
+
+static struct pci_ops null_pci_ops = {
+	.read = null_read_config,
+	.write = null_write_config,
+};
+
+/*
+ * These functions are used early on before PCI scanning is done
+ * and all of the pci_dev and pci_bus structures have been created.
+ */
+static struct pci_bus *
+fake_pci_bus(struct pci_controller *hose, int busnr)
+{
+	static struct pci_bus bus;
+
+	if (!hose)
+		printk(KERN_ERR "Can't find hose for PCI bus %d!\n", busnr);
+
+	bus.number = busnr;
+	bus.sysdata = hose;
+	bus.ops = hose ? hose->ops : &null_pci_ops;
+	return &bus;
+}
+
+#define EARLY_PCI_OP(rw, size, type)					\
+int early_##rw##_config_##size(struct pci_controller *hose, int bus,	\
+			       int devfn, int offset, type value)	\
+{									\
+	return pci_bus_##rw##_config_##size(fake_pci_bus(hose, bus),	\
+					    devfn, offset, value);	\
+}
+
+EARLY_PCI_OP(read, byte, u8 *)
+EARLY_PCI_OP(read, word, u16 *)
+EARLY_PCI_OP(read, dword, u32 *)
+EARLY_PCI_OP(write, byte, u8)
+EARLY_PCI_OP(write, word, u16)
+EARLY_PCI_OP(write, dword, u32)
+
+int early_find_capability(struct pci_controller *hose, int bus, int devfn,
+			  int cap)
+{
+	return pci_bus_find_capability(fake_pci_bus(hose, bus), devfn, cap);
+}

arch/microblaze/pci/pci_32.c

···
+/*
+ * Common pmac/prep/chrp pci routines. -- Cort
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/string.h>
+#include <linux/init.h>
+#include <linux/capability.h>
+#include <linux/sched.h>
+#include <linux/errno.h>
+#include <linux/bootmem.h>
+#include <linux/irq.h>
+#include <linux/list.h>
+#include <linux/of.h>
+
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <asm/prom.h>
+#include <asm/sections.h>
+#include <asm/pci-bridge.h>
+#include <asm/byteorder.h>
+#include <asm/uaccess.h>
+
+#undef DEBUG
+
+unsigned long isa_io_base;
+unsigned long pci_dram_offset;
+int pcibios_assign_bus_offset = 1;
+
+static u8 *pci_to_OF_bus_map;
+
+/* By default, we don't re-assign bus numbers. We do this only on
+ * some pmacs
+ */
+static int pci_assign_all_buses;
+
+static int pci_bus_count;
+
+/*
+ * Functions below are used on OpenFirmware machines.
+ */
+static void
+make_one_node_map(struct device_node *node, u8 pci_bus)
+{
+	const int *bus_range;
+	int len;
+
+	if (pci_bus >= pci_bus_count)
+		return;
+	bus_range = of_get_property(node, "bus-range", &len);
+	if (bus_range == NULL || len < 2 * sizeof(int)) {
+		printk(KERN_WARNING "Can't get bus-range for %s, "
+		       "assuming it starts at 0\n", node->full_name);
+		pci_to_OF_bus_map[pci_bus] = 0;
+	} else
+		pci_to_OF_bus_map[pci_bus] = bus_range[0];
+
+	for_each_child_of_node(node, node) {
+		struct pci_dev *dev;
+		const unsigned int *class_code, *reg;
+
+		class_code = of_get_property(node, "class-code", NULL);
+		if (!class_code ||
+			((*class_code >> 8) != PCI_CLASS_BRIDGE_PCI &&
+			(*class_code >> 8) != PCI_CLASS_BRIDGE_CARDBUS))
+			continue;
+		reg = of_get_property(node, "reg", NULL);
+		if (!reg)
+			continue;
+		dev = pci_get_bus_and_slot(pci_bus, ((reg[0] >> 8) & 0xff));
+		if (!dev || !dev->subordinate) {
+			pci_dev_put(dev);
+			continue;
+		}
+		make_one_node_map(node, dev->subordinate->number);
+		pci_dev_put(dev);
+	}
+}
+
+void
+pcibios_make_OF_bus_map(void)
+{
+	int i;
+	struct pci_controller *hose, *tmp;
+	struct property *map_prop;
+	struct device_node *dn;
+
+	pci_to_OF_bus_map = kmalloc(pci_bus_count, GFP_KERNEL);
+	if (!pci_to_OF_bus_map) {
+		printk(KERN_ERR "Can't allocate OF bus map !\n");
+		return;
+	}
+
+	/* We fill the bus map with invalid values, that helps
+	 * debugging.
+	 */
+	for (i = 0; i < pci_bus_count; i++)
+		pci_to_OF_bus_map[i] = 0xff;
+
+	/* For each hose, we begin searching bridges */
+	list_for_each_entry_safe(hose, tmp, &hose_list, list_node) {
+		struct device_node *node = hose->dn;
+
+		if (!node)
+			continue;
+		make_one_node_map(node, hose->first_busno);
+	}
+	dn = of_find_node_by_path("/");
+	map_prop = of_find_property(dn, "pci-OF-bus-map", NULL);
+	if (map_prop) {
+		BUG_ON(pci_bus_count > map_prop->length);
+		memcpy(map_prop->value, pci_to_OF_bus_map, pci_bus_count);
+	}
+	of_node_put(dn);
+#ifdef DEBUG
+	printk(KERN_INFO "PCI->OF bus map:\n");
+	for (i = 0; i < pci_bus_count; i++) {
+		if (pci_to_OF_bus_map[i] == 0xff)
+			continue;
+		printk(KERN_INFO "%d -> %d\n", i, pci_to_OF_bus_map[i]);
+	}
+#endif
+}
+
+typedef int (*pci_OF_scan_iterator)(struct device_node *node, void *data);
+
+static struct device_node *scan_OF_pci_childs(struct device_node *parent,
+					pci_OF_scan_iterator filter, void *data)
+{
+	struct device_node *node;
+	struct device_node *sub_node;
+
+	for_each_child_of_node(parent, node) {
+		const unsigned int *class_code;
+
+		if (filter(node, data)) {
+			of_node_put(node);
+			return node;
+		}
+
+		/* For PCI<->PCI bridges or CardBus bridges, we go down
+		 * Note: some OFs create a parent node "multifunc-device" as
+		 * a fake root for all functions of a multi-function device,
+		 * we go down them as well.
+		 */
+		class_code = of_get_property(node, "class-code", NULL);
+		if ((!class_code ||
+			((*class_code >> 8) != PCI_CLASS_BRIDGE_PCI &&
+			(*class_code >> 8) != PCI_CLASS_BRIDGE_CARDBUS)) &&
+			strcmp(node->name, "multifunc-device"))
+			continue;
+		sub_node = scan_OF_pci_childs(node, filter, data);
+		if (sub_node) {
+			of_node_put(node);
+			return sub_node;
+		}
+	}
+	return NULL;
+}
+
+static struct device_node *scan_OF_for_pci_dev(struct device_node *parent,
+					       unsigned int devfn)
+{
+	struct device_node *np, *cnp;
+	const u32 *reg;
+	unsigned int psize;
+
+	for_each_child_of_node(parent, np) {
+		reg = of_get_property(np, "reg", &psize);
+		if (reg && psize >= 4 && ((reg[0] >> 8) & 0xff) == devfn)
+			return np;
+
+		/* Note: some OFs create a parent node "multifunc-device" as
+		 * a fake root for all functions of a multi-function device,
+		 * we go down them as well. */
+		if (!strcmp(np->name, "multifunc-device")) {
+			cnp = scan_OF_for_pci_dev(np, devfn);
+			if (cnp)
+				return cnp;
+		}
+	}
+	return NULL;
+}
+
+
+static struct device_node *scan_OF_for_pci_bus(struct pci_bus *bus)
+{
+	struct device_node *parent, *np;
+
+	/* Are we a root bus ? */
+	if (bus->self == NULL || bus->parent == NULL) {
+		struct pci_controller *hose = pci_bus_to_host(bus);
+		if (hose == NULL)
+			return NULL;
+		return of_node_get(hose->dn);
+	}
+
+	/* not a root bus, we need to get our parent */
+	parent = scan_OF_for_pci_bus(bus->parent);
+	if (parent == NULL)
+		return NULL;
+
+	/* now iterate for children for a match */
+	np = scan_OF_for_pci_dev(parent, bus->self->devfn);
+	of_node_put(parent);
+
+	return np;
+}
+
+/*
+ * Scans the OF tree for a device node matching a PCI device
+ */
+struct device_node *
+pci_busdev_to_OF_node(struct pci_bus *bus, int devfn)
+{
+	struct device_node *parent, *np;
+
+	pr_debug("pci_busdev_to_OF_node(%d,0x%x)\n", bus->number, devfn);
+	parent = scan_OF_for_pci_bus(bus);
+	if (parent == NULL)
+		return NULL;
+	pr_debug(" parent is %s\n", parent ? parent->full_name : "<NULL>");
+	np = scan_OF_for_pci_dev(parent, devfn);
+	of_node_put(parent);
+	pr_debug(" result is %s\n", np ? np->full_name : "<NULL>");
+
+	/* XXX most callers don't release the returned node
+	 * mostly because ppc64 doesn't increase the refcount,
+	 * we need to fix that.
+	 */
+	return np;
+}
+EXPORT_SYMBOL(pci_busdev_to_OF_node);
+
+struct device_node*
+pci_device_to_OF_node(struct pci_dev *dev)
+{
+	return pci_busdev_to_OF_node(dev->bus, dev->devfn);
+}
+EXPORT_SYMBOL(pci_device_to_OF_node);
+
+static int
+find_OF_pci_device_filter(struct device_node *node, void *data)
+{
+	return ((void *)node == data);
+}
+
+/*
+ * Returns the PCI device matching a given OF node
+ */
+int
+pci_device_from_OF_node(struct device_node *node, u8 *bus, u8 *devfn)
+{
+	const unsigned int *reg;
+	struct pci_controller *hose;
+	struct pci_dev *dev = NULL;
+
+	/* Make sure it's really a PCI device */
+	hose = pci_find_hose_for_OF_device(node);
+	if (!hose || !hose->dn)
+		return -ENODEV;
+	if (!scan_OF_pci_childs(hose->dn,
+			find_OF_pci_device_filter, (void *)node))
+		return -ENODEV;
+	reg = of_get_property(node, "reg", NULL);
+	if (!reg)
+		return -ENODEV;
+	*bus = (reg[0] >> 16) & 0xff;
+	*devfn = ((reg[0] >> 8) & 0xff);
+
+	/* Ok, here we need some tweak. If we have already renumbered
+	 * all busses, we can't rely on the OF bus number any more.
+	 * the pci_to_OF_bus_map is not enough as several PCI busses
+	 * may match the same OF bus number.
+	 */
+	if (!pci_to_OF_bus_map)
+		return 0;
+
+	for_each_pci_dev(dev)
+		if (pci_to_OF_bus_map[dev->bus->number] == *bus &&
+				dev->devfn == *devfn) {
+			*bus = dev->bus->number;
+			pci_dev_put(dev);
+			return 0;
+		}
+
+	return -ENODEV;
+}
+EXPORT_SYMBOL(pci_device_from_OF_node);
+
+/* We create the "pci-OF-bus-map" property now so it appears in the
+ * /proc device tree
+ */
+void __init
+pci_create_OF_bus_map(void)
+{
+	struct property *of_prop;
+	struct device_node *dn;
+
+	of_prop = (struct property *) alloc_bootmem(sizeof(struct property) + \
+									 256);
+	if (!of_prop)
+		return;
+	dn = of_find_node_by_path("/");
+	if (dn) {
+		memset(of_prop, -1, sizeof(struct property) + 256);
+		of_prop->name = "pci-OF-bus-map";
+		of_prop->length = 256;
+		of_prop->value = &of_prop[1];
+		prom_add_property(dn, of_prop);
+		of_node_put(dn);
+	}
+}
+
+static void __devinit pcibios_scan_phb(struct pci_controller *hose)
+{
+	struct pci_bus *bus;
+	struct device_node *node = hose->dn;
+	unsigned long io_offset;
+	struct resource *res = &hose->io_resource;
+
+	pr_debug("PCI: Scanning PHB %s\n",
+		 node ? node->full_name : "<NO NAME>");
+
+	/* Create an empty bus for the toplevel */
+	bus = pci_create_bus(hose->parent, hose->first_busno, hose->ops, hose);
+	if (bus == NULL) {
+		printk(KERN_ERR "Failed to create bus for PCI domain %04x\n",
+		       hose->global_number);
+		return;
+	}
+	bus->secondary = hose->first_busno;
+	hose->bus = bus;
+
+	/* Fixup IO space offset */
+	io_offset = (unsigned long)hose->io_base_virt - isa_io_base;
+	res->start = (res->start + io_offset) & 0xffffffffu;
+	res->end = (res->end + io_offset) & 0xffffffffu;
+
+	/* Wire up PHB bus resources */
+	pcibios_setup_phb_resources(hose);
+
+	/* Scan children */
+	hose->last_busno = bus->subordinate = pci_scan_child_bus(bus);
+}
+
+static int __init pcibios_init(void)
+{
+	struct pci_controller *hose, *tmp;
+	int next_busno = 0;
+
+	printk(KERN_INFO "PCI: Probing PCI hardware\n");
+
+	if (pci_flags & PCI_REASSIGN_ALL_BUS) {
+		printk(KERN_INFO "setting pci_asign_all_busses\n");
+		pci_assign_all_buses = 1;
+	}
+
+	/* Scan all of the recorded PCI controllers.  */
+	list_for_each_entry_safe(hose, tmp, &hose_list, list_node) {
+		if (pci_assign_all_buses)
+			hose->first_busno = next_busno;
+		hose->last_busno = 0xff;
+		pcibios_scan_phb(hose);
+		printk(KERN_INFO "calling pci_bus_add_devices()\n");
+		pci_bus_add_devices(hose->bus);
+		if (pci_assign_all_buses || next_busno <= hose->last_busno)
+			next_busno = hose->last_busno + \
+					pcibios_assign_bus_offset;
+	}
+	pci_bus_count = next_busno;
+
+	/* OpenFirmware based machines need a map of OF bus
+	 * numbers vs. kernel bus numbers since we may have to
+	 * remap them.
+	 */
+	if (pci_assign_all_buses)
+		pcibios_make_OF_bus_map();
+
+	/* Call common code to handle resource allocation */
+	pcibios_resource_survey();
+
+	return 0;
+}
+
+subsys_initcall(pcibios_init);
+
+static struct pci_controller*
+pci_bus_to_hose(int bus)
+{
+	struct pci_controller *hose, *tmp;
+
+	list_for_each_entry_safe(hose, tmp, &hose_list, list_node)
+		if (bus >= hose->first_busno && bus <= hose->last_busno)
+			return hose;
+	return NULL;
+}
+
+/* Provide information on locations of various I/O regions in physical
+ * memory.  Do this on a per-card basis so that we choose the right
+ * root bridge.
+ * Note that the returned IO or memory base is a physical address
+ */
+
+long sys_pciconfig_iobase(long which, unsigned long bus, unsigned long devfn)
+{
+	struct pci_controller *hose;
+	long result = -EOPNOTSUPP;
+
+	hose = pci_bus_to_hose(bus);
+	if (!hose)
+		return -ENODEV;
+
+	switch (which) {
+	case IOBASE_BRIDGE_NUMBER:
+		return (long)hose->first_busno;
+	case IOBASE_MEMORY:
+		return (long)hose->pci_mem_offset;
+	case IOBASE_IO:
+		return (long)hose->io_base_phys;
+	case IOBASE_ISA_IO:
+		return (long)isa_io_base;
+	case IOBASE_ISA_MEM:
+		return (long)isa_mem_base;
+	}
+
+	return result;
+}

arch/microblaze/pci/xilinx_pci.c

···
+/*
+ * PCI support for Xilinx plbv46_pci soft-core which can be used on
+ * Xilinx Virtex ML410 / ML510 boards.
+ *
+ * Copyright 2009 Roderick Colenbrander
+ * Copyright 2009 Secret Lab Technologies Ltd.
+ *
+ * The pci bridge fixup code was copied from ppc4xx_pci.c and was written
+ * by Benjamin Herrenschmidt.
+ * Copyright 2007 Ben. Herrenschmidt <[e-mail]>, IBM Corp.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/ioport.h>
+#include <linux/of.h>
+#include <linux/pci.h>
+#include <asm/io.h>
+
+#define XPLB_PCI_ADDR 0x10c
+#define XPLB_PCI_DATA 0x110
+#define XPLB_PCI_BUS  0x114
+
+#define PCI_HOST_ENABLE_CMD (PCI_COMMAND_SERR | PCI_COMMAND_PARITY | \
+				PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY)
+
+static struct of_device_id xilinx_pci_match[] = {
+	{ .compatible = "xlnx,plbv46-pci-1.03.a", },
+	{}
+};
+
+/**
+ * xilinx_pci_fixup_bridge - Block Xilinx PHB configuration.
+ */
+static void xilinx_pci_fixup_bridge(struct pci_dev *dev)
+{
+	struct pci_controller *hose;
+	int i;
+
+	if (dev->devfn || dev->bus->self)
+		return;
+
+	hose = pci_bus_to_host(dev->bus);
+	if (!hose)
+		return;
+
+	if (!of_match_node(xilinx_pci_match, hose->dn))
+		return;
+
+	/* Hide the PCI host BARs from the kernel as their content doesn't
+	 * fit well in the resource management
+	 */
+	for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
+		dev->resource[i].start = 0;
+		dev->resource[i].end = 0;
+		dev->resource[i].flags = 0;
+	}
+
+	dev_info(&dev->dev, "Hiding Xilinx plb-pci host bridge resources %s\n",
+		 pci_name(dev));
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, xilinx_pci_fixup_bridge);
+
+#ifdef DEBUG
+/**
+ * xilinx_pci_exclude_device - Don't do config access for non-root bus
+ *
+ * This is a hack.  Config access to any bus other than bus 0 does not
+ * currently work on the ML510 so we prevent it here.
+ */
+static int
+xilinx_pci_exclude_device(struct pci_controller *hose, u_char bus, u8 devfn)
+{
+	return (bus != 0);
+}
+
+/**
+ * xilinx_early_pci_scan - List pci config space for available devices
+ *
+ * List pci devices in very early phase.
+ */
+void __init xilinx_early_pci_scan(struct pci_controller *hose)
+{
+	u32 bus = 0;
+	u32 val, dev, func, offset;
+
+	/* Currently we have only 2 device connected - up-to 32 devices */
+	for (dev = 0; dev < 2; dev++) {
+		/* List only first function number - up-to 8 functions */
+		for (func = 0; func < 1; func++) {
+			printk(KERN_INFO "%02x:%02x:%02x", bus, dev, func);
+			/* read the first 64 standardized bytes */
+			/* Up-to 192 bytes can be list of capabilities */
+			for (offset = 0; offset < 64; offset += 4) {
+				early_read_config_dword(hose, bus,
+					PCI_DEVFN(dev, func), offset, &val);
+				if (offset == 0 && val == 0xFFFFFFFF) {
+					printk(KERN_CONT "\nABSENT");
+					break;
+				}
+				if (!(offset % 0x10))
+					printk(KERN_CONT "\n%04x:    ", offset);
+
+				printk(KERN_CONT "%08x  ", val);
+			}
+			printk(KERN_INFO "\n");
+		}
+	}
+}
+#else
+void __init xilinx_early_pci_scan(struct pci_controller *hose)
+{
+}
+#endif
+
+/**
+ * xilinx_pci_init - Find and register a Xilinx PCI host bridge
+ */
+void __init xilinx_pci_init(void)
+{
+	struct pci_controller *hose;
+	struct resource r;
+	void __iomem *pci_reg;
+	struct device_node *pci_node;
+
+	pci_node = of_find_matching_node(NULL, xilinx_pci_match);
+	if (!pci_node)
+		return;
+
+	if (of_address_to_resource(pci_node, 0, &r)) {
+		pr_err("xilinx-pci: cannot resolve base address\n");
+		return;
+	}
+
+	hose = pcibios_alloc_controller(pci_node);
+	if (!hose) {
+		pr_err("xilinx-pci: pcibios_alloc_controller() failed\n");
+		return;
+	}
+
+	/* Setup config space */
+	setup_indirect_pci(hose, r.start + XPLB_PCI_ADDR,
+			   r.start + XPLB_PCI_DATA,
+			   INDIRECT_TYPE_SET_CFG_TYPE);
+
+	/* According to the xilinx plbv46_pci documentation the soft-core starts
+	 * a self-init when the bus master enable bit is set. Without this bit
+	 * set the pci bus can't be scanned.
+	 */
+	early_write_config_word(hose, 0, 0, PCI_COMMAND, PCI_HOST_ENABLE_CMD);
+
+	/* Set the max latency timer to 255 */
+	early_write_config_byte(hose, 0, 0, PCI_LATENCY_TIMER, 0xff);
+
+	/* Set the max bus number to 255, and bus/subbus no's to 0 */
+	pci_reg = of_iomap(pci_node, 0);
+	out_be32(pci_reg + XPLB_PCI_BUS, 0x000000ff);
+	iounmap(pci_reg);
+
+	/* Register the host bridge with the linux kernel! */
+	pci_process_bridge_OF_ranges(hose, pci_node,
+					INDIRECT_TYPE_SET_CFG_TYPE);
+
+	pr_info("xilinx-pci: Registered PCI host bridge\n");
+	xilinx_early_pci_scan(hose);
+}

drivers/pci/Makefile

···
 obj-$(CONFIG_MIPS) += setup-bus.o setup-irq.o
 obj-$(CONFIG_X86_VISWS) += setup-irq.o
 obj-$(CONFIG_MN10300) += setup-bus.o
+obj-$(CONFIG_MICROBLAZE) += setup-bus.o
 
 #
 # ACPI Related PCI FW Functions