mfd: tmio: Move header to platform_data

All the MFD components are gone from the header meanwhile. Only the MMC
relevant data is left which makes it a platform_data for the MMC
controller. Move the header to the now fitting directory.

Signed-off-by: Wolfram Sang <[e-mail]>
Acked-by: Ulf Hansson <[e-mail]> # For MMC
Acked-by: John Paul Adrian Glaubitz <[e-mail]>
Reviewed-by: Geert Uytterhoeven <[e-mail]>
Link: https://lore.kernel.org/r/[e-mail]
Signed-off-by: Lee Jones <[e-mail]>

MAINTAINERS

···
 S:	Supported
 F:	drivers/mmc/host/renesas_sdhi*
 F:	drivers/mmc/host/tmio_mmc*
-F:	include/linux/mfd/tmio.h
+F:	include/linux/platform_data/tmio.h
 
 TMP513 HARDWARE MONITOR DRIVER
 M:	Eric Tremblay <[e-mail]>

arch/sh/boards/board-sh7757lcr.c

···
 #include <linux/spi/spi.h>
 #include <linux/spi/flash.h>
 #include <linux/io.h>
-#include <linux/mfd/tmio.h>
 #include <linux/mmc/host.h>
 #include <linux/platform_data/sh_mmcif.h>
+#include <linux/platform_data/tmio.h>
 #include <linux/sh_eth.h>
 #include <linux/sh_intc.h>
 #include <linux/usb/renesas_usbhs.h>

arch/sh/boards/mach-ap325rxa/setup.c

···
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/memblock.h>
-#include <linux/mfd/tmio.h>
 #include <linux/mmc/host.h>
 #include <linux/mtd/physmap.h>
 #include <linux/mtd/sh_flctl.h>
+#include <linux/platform_data/tmio.h>
 #include <linux/platform_device.h>
 #include <linux/regulator/fixed.h>
 #include <linux/regulator/machine.h>

arch/sh/boards/mach-ecovec24/setup.c

···
 #include <linux/input/sh_keysc.h>
 #include <linux/interrupt.h>
 #include <linux/memblock.h>
-#include <linux/mfd/tmio.h>
 #include <linux/mmc/host.h>
 #include <linux/platform_data/sh_mmcif.h>
 #include <linux/mtd/physmap.h>
 #include <linux/gpio.h>
 #include <linux/gpio/machine.h>
 #include <linux/platform_data/gpio_backlight.h>
+#include <linux/platform_data/tmio.h>
 #include <linux/platform_data/tsc2007.h>
 #include <linux/platform_device.h>
 #include <linux/regulator/fixed.h>

arch/sh/boards/mach-kfr2r09/setup.c

···
 #include <linux/input/sh_keysc.h>
 #include <linux/interrupt.h>
 #include <linux/memblock.h>
-#include <linux/mfd/tmio.h>
 #include <linux/mmc/host.h>
 #include <linux/mtd/physmap.h>
 #include <linux/platform_data/lv5207lp.h>
+#include <linux/platform_data/tmio.h>
 #include <linux/platform_device.h>
 #include <linux/regulator/fixed.h>
 #include <linux/regulator/machine.h>

arch/sh/boards/mach-migor/setup.c

···
 #include <linux/clkdev.h>
 #include <linux/dma-map-ops.h>
 #include <linux/init.h>
+#include <linux/platform_data/tmio.h>
 #include <linux/platform_device.h>
 #include <linux/interrupt.h>
 #include <linux/input.h>
···
 #include <linux/memblock.h>
 #include <linux/mmc/host.h>
 #include <linux/mtd/physmap.h>
-#include <linux/mfd/tmio.h>
 #include <linux/mtd/platnand.h>
 #include <linux/i2c.h>
 #include <linux/regulator/fixed.h>

arch/sh/boards/mach-se/7724/setup.c

···
 #include <linux/input/sh_keysc.h>
 #include <linux/interrupt.h>
 #include <linux/memblock.h>
-#include <linux/mfd/tmio.h>
 #include <linux/mmc/host.h>
 #include <linux/mtd/physmap.h>
+#include <linux/platform_data/tmio.h>
 #include <linux/platform_device.h>
 #include <linux/regulator/fixed.h>
 #include <linux/regulator/machine.h>

drivers/mmc/host/renesas_sdhi_core.c

···
 #include <linux/delay.h>
 #include <linux/iopoll.h>
 #include <linux/kernel.h>
-#include <linux/mfd/tmio.h>
 #include <linux/mmc/host.h>
 #include <linux/mmc/mmc.h>
 #include <linux/mmc/slot-gpio.h>
 #include <linux/module.h>
 #include <linux/pinctrl/consumer.h>
 #include <linux/pinctrl/pinctrl-state.h>
+#include <linux/platform_data/tmio.h>
 #include <linux/platform_device.h>
 #include <linux/pm_domain.h>
 #include <linux/regulator/consumer.h>

drivers/mmc/host/renesas_sdhi_internal_dmac.c

···
 #include <linux/device.h>
 #include <linux/dma-mapping.h>
 #include <linux/io-64-nonatomic-hi-lo.h>
-#include <linux/mfd/tmio.h>
 #include <linux/mmc/host.h>
 #include <linux/mod_devicetable.h>
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/pagemap.h>
+#include <linux/platform_data/tmio.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/scatterlist.h>

drivers/mmc/host/renesas_sdhi_sys_dmac.c

···
 #include <linux/device.h>
 #include <linux/dma-mapping.h>
 #include <linux/dmaengine.h>
-#include <linux/mfd/tmio.h>
 #include <linux/mmc/host.h>
 #include <linux/mod_devicetable.h>
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/pagemap.h>
+#include <linux/platform_data/tmio.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/scatterlist.h>

drivers/mmc/host/tmio_mmc_core.c

···
 #include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/irq.h>
-#include <linux/mfd/tmio.h>
 #include <linux/mmc/card.h>
 #include <linux/mmc/host.h>
 #include <linux/mmc/mmc.h>
···
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/pagemap.h>
+#include <linux/platform_data/tmio.h>
 #include <linux/platform_device.h>
 #include <linux/pm_qos.h>
 #include <linux/pm_runtime.h>

drivers/mmc/host/uniphier-sd.c

···
 #include <linux/delay.h>
 #include <linux/dma-mapping.h>
 #include <linux/mfd/syscon.h>
-#include <linux/mfd/tmio.h>
 #include <linux/mmc/host.h>
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/pinctrl/consumer.h>
+#include <linux/platform_data/tmio.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 #include <linux/reset.h>