drm/ast: Blank with VGACR17 sync enable, always clear VGACRB6 sync off

Blank the display by disabling sync pulses with VGACR17<7>. Unblank
by reenabling them. This VGA setting should be supported by all Aspeed
hardware.

Ast currently blanks via sync-off bits in VGACRB6. Not all BMCs handle
VGACRB6 correctly. After disabling sync during a reboot, some BMCs do
not reenable it after the soft reset. The display output remains dark.
When the display is off during boot, some BMCs set the sync-off bits in
VGACRB6, so the display remains dark. Observed with Blackbird AST2500
BMCs. Clearing the sync-off bits unconditionally fixes these issues.

Also do not modify VGASR1's SD bit for blanking, as it only disables GPU
access to video memory.

v2:
- init vgacrb6 correctly (Jocelyn)

Signed-off-by: Thomas Zimmermann <[e-mail]>
Fixes: ce3d99c83495 ("drm: Call drm_atomic_helper_shutdown() at shutdown time for misc drivers")
Tested-by: Nick Bowler <[e-mail]>
Reported-by: Nick Bowler <[e-mail]>
Closes: https://lore.kernel.org/dri-devel/wpwd7rit6t4mnu6kdqbtsnk5bhftgslio6e2jgkz6kgw6cuvvr@xbfswsczfqsi/
Cc: Douglas Anderson <[e-mail]>
Cc: Dave Airlie <[e-mail]>
Cc: Thomas Zimmermann <[e-mail]>
Cc: Jocelyn Falempe <[e-mail]>
Cc: [e-mail]
Cc: <[e-mail]> # v6.7+
Reviewed-by: Jocelyn Falempe <[e-mail]>
Link: https://lore.kernel.org/r/[e-mail]

drivers/gpu/drm/ast/ast_mode.c

···
 static void ast_crtc_helper_atomic_enable(struct drm_crtc *crtc, struct drm_atomic_state *state)
 {
 	struct ast_device *ast = to_ast_device(crtc->dev);
+	u8 vgacr17 = 0x00;
+	u8 vgacrb6 = 0xff;
 
-	ast_set_index_reg_mask(ast, AST_IO_VGACRI, 0xb6, 0xfc, 0x00);
-	ast_set_index_reg_mask(ast, AST_IO_VGASRI, 0x01, 0xdf, 0x00);
+	vgacr17 |= AST_IO_VGACR17_SYNC_ENABLE;
+	vgacrb6 &= ~(AST_IO_VGACRB6_VSYNC_OFF | AST_IO_VGACRB6_HSYNC_OFF);
+
+	ast_set_index_reg_mask(ast, AST_IO_VGACRI, 0x17, 0x7f, vgacr17);
+	ast_set_index_reg_mask(ast, AST_IO_VGACRI, 0xb6, 0xfc, vgacrb6);
 }
 
 static void ast_crtc_helper_atomic_disable(struct drm_crtc *crtc, struct drm_atomic_state *state)
 {
 	struct drm_crtc_state *old_crtc_state = drm_atomic_get_old_crtc_state(state, crtc);
 	struct ast_device *ast = to_ast_device(crtc->dev);
-	u8 vgacrb6;
+	u8 vgacr17 = 0xff;
 
-	ast_set_index_reg_mask(ast, AST_IO_VGASRI, 0x01, 0xdf, AST_IO_VGASR1_SD);
-
-	vgacrb6 = AST_IO_VGACRB6_VSYNC_OFF |
-		  AST_IO_VGACRB6_HSYNC_OFF;
-	ast_set_index_reg_mask(ast, AST_IO_VGACRI, 0xb6, 0xfc, vgacrb6);
+	vgacr17 &= ~AST_IO_VGACR17_SYNC_ENABLE;
+	ast_set_index_reg_mask(ast, AST_IO_VGACRI, 0x17, 0x7f, vgacr17);
 
 	/*
 	 * HW cursors require the underlying primary plane and CRTC to

drivers/gpu/drm/ast/ast_reg.h

···
 #define AST_IO_VGAGRI			(0x4E)
 
 #define AST_IO_VGACRI			(0x54)
+#define AST_IO_VGACR17_SYNC_ENABLE	BIT(7) /* called "Hardware reset" in docs */
 #define AST_IO_VGACR80_PASSWORD		(0xa8)
 #define AST_IO_VGACR99_VGAMEM_RSRV_MASK	GENMASK(1, 0)
 #define AST_IO_VGACRA1_VGAIO_DISABLED	BIT(1)