dt-bindings: net: Convert socfpga-dwmac bindings to yaml

Convert the bindings for socfpga-dwmac to yaml. Since the original
text contained descriptions for two separate nodes, two separate
yaml files were created.

Signed-off-by: Mun Yew Tham <[e-mail]>
Signed-off-by: Matthew Gerlach <[e-mail]>
Reviewed-by: Maxime Chevallier <[e-mail]>
Reviewed-by: Rob Herring (Arm) <[e-mail]>
Link: https://patch.msgid.link/[e-mail]
Signed-off-by: Jakub Kicinski <[e-mail]>

Documentation/devicetree/bindings/net/altr,gmii-to-sgmii-2.0.yaml

···
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+# Copyright (C) 2025 Altera Corporation
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/altr,gmii-to-sgmii-2.0.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Altera GMII to SGMII Converter
+
+maintainers:
+  - Matthew Gerlach <[e-mail]>
+
+description:
+  This binding describes the Altera GMII to SGMII converter.
+
+properties:
+  compatible:
+    const: altr,gmii-to-sgmii-2.0
+
+  reg:
+    items:
+      - description: Registers for the emac splitter IP
+      - description: Registers for the GMII to SGMII converter.
+      - description: Registers for TSE control.
+
+  reg-names:
+    items:
+      - const: hps_emac_interface_splitter_avalon_slave
+      - const: gmii_to_sgmii_adapter_avalon_slave
+      - const: eth_tse_control_port
+
+required:
+  - compatible
+  - reg
+  - reg-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    phy@ff000240 {
+        compatible = "altr,gmii-to-sgmii-2.0";
+        reg = <0xff000240 0x00000008>,
+              <0xff000200 0x00000040>,
+              <0xff000250 0x00000008>;
+        reg-names = "hps_emac_interface_splitter_avalon_slave",
+                    "gmii_to_sgmii_adapter_avalon_slave",
+                    "eth_tse_control_port";
+    };

Documentation/devicetree/bindings/net/altr,socfpga-stmmac.yaml

···
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/altr,socfpga-stmmac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Altera SOCFPGA SoC DWMAC controller
+
+maintainers:
+  - Matthew Gerlach <[e-mail]>
+
+description:
+  This binding describes the Altera SOCFPGA SoC implementation of the
+  Synopsys DWMAC for the Cyclone5, Arria5, Stratix10, and Agilex7 families
+  of chips.
+  # TODO: Determine how to handle the Arria10 reset-name, stmmaceth-ocp, that
+  # does not validate against net/snps,dwmac.yaml.
+
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - altr,socfpga-stmmac
+          - altr,socfpga-stmmac-a10-s10
+
+  required:
+    - compatible
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: altr,socfpga-stmmac
+          - const: snps,dwmac-3.70a
+          - const: snps,dwmac
+      - items:
+          - const: altr,socfpga-stmmac-a10-s10
+          - const: snps,dwmac-3.72a
+          - const: snps,dwmac
+      - items:
+          - const: altr,socfpga-stmmac-a10-s10
+          - const: snps,dwmac-3.74a
+          - const: snps,dwmac
+
+  clocks:
+    minItems: 1
+    items:
+      - description: GMAC main clock
+      - description:
+          PTP reference clock. This clock is used for programming the
+          Timestamp Addend Register. If not passed then the system
+          clock will be used and this is fine on some platforms.
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: stmmaceth
+      - const: ptp_ref
+
+  iommus:
+    maxItems: 2
+
+  phy-mode:
+    enum:
+      - gmii
+      - mii
+      - rgmii
+      - rgmii-id
+      - rgmii-rxid
+      - rgmii-txid
+      - sgmii
+      - 1000base-x
+
+  rxc-skew-ps:
+    description: Skew control of RXC pad
+
+  rxd0-skew-ps:
+    description: Skew control of RX data 0 pad
+
+  rxd1-skew-ps:
+    description: Skew control of RX data 1 pad
+
+  rxd2-skew-ps:
+    description: Skew control of RX data 2 pad
+
+  rxd3-skew-ps:
+    description: Skew control of RX data 3 pad
+
+  rxdv-skew-ps:
+    description: Skew control of RX CTL pad
+
+  txc-skew-ps:
+    description: Skew control of TXC pad
+
+  txen-skew-ps:
+    description: Skew control of TXC pad
+
+  altr,emac-splitter:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Should be the phandle to the emac splitter soft IP node if DWMAC
+      controller is connected an emac splitter.
+
+  altr,f2h_ptp_ref_clk:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to Precision Time Protocol reference clock. This clock is
+      common to gmac instances and defaults to osc1.
+
+  altr,gmii-to-sgmii-converter:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Should be the phandle to the gmii to sgmii converter soft IP.
+
+  altr,sysmgr-syscon:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description:
+      Should be the phandle to the system manager node that encompass
+      the glue register, the register offset, and the register shift.
+      On Cyclone5/Arria5, the register shift represents the PHY mode
+      bits, while on the Arria10/Stratix10/Agilex platforms, the
+      register shift represents bit for each emac to enable/disable
+      signals from the FPGA fabric to the EMAC modules.
+    items:
+      - items:
+          - description: phandle to the system manager node
+          - description: offset of the control register
+          - description: shift within the control register
+
+patternProperties:
+  "^mdio[0-9]$":
+    type: object
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - altr,sysmgr-syscon
+
+allOf:
+  - $ref: snps,dwmac.yaml#
+
+unevaluatedProperties: false
+
+examples:
+
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    soc {
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ethernet@ff700000 {
+            compatible = "altr,socfpga-stmmac", "snps,dwmac-3.70a",
+            "snps,dwmac";
+            altr,sysmgr-syscon = <&sysmgr 0x60 0>;
+            reg = <0xff700000 0x2000>;
+            interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "macirq";
+            mac-address = [00 00 00 00 00 00]; /* Filled in by U-Boot */
+            clocks = <&emac_0_clk>;
+            clock-names = "stmmaceth";
+            phy-mode = "sgmii";
+        };
+    };

Documentation/devicetree/bindings/net/socfpga-dwmac.txt

···
-Altera SOCFPGA SoC DWMAC controller
-
-This is a variant of the dwmac/stmmac driver an inherits all descriptions
-present in Documentation/devicetree/bindings/net/stmmac.txt.
-
-The device node has additional properties:
-
-Required properties:
- - compatible	: For Cyclone5/Arria5 SoCs it should contain
-		  "altr,socfpga-stmmac". For Arria10/Agilex/Stratix10 SoCs
-		  "altr,socfpga-stmmac-a10-s10".
-		  Along with "snps,dwmac" and any applicable more detailed
-		  designware version numbers documented in stmmac.txt
- - altr,sysmgr-syscon : Should be the phandle to the system manager node that
-   encompasses the glue register, the register offset, and the register shift.
-   On Cyclone5/Arria5, the register shift represents the PHY mode bits, while
-   on the Arria10/Stratix10/Agilex platforms, the register shift represents
-   bit for each emac to enable/disable signals from the FPGA fabric to the
-   EMAC modules.
- - altr,f2h_ptp_ref_clk use f2h_ptp_ref_clk instead of default eosc1 clock
-   for ptp ref clk. This affects all emacs as the clock is common.
-
-Optional properties:
-altr,emac-splitter: Should be the phandle to the emac splitter soft IP node if
-		DWMAC controller is connected emac splitter.
-phy-mode: The phy mode the ethernet operates in
-altr,sgmii-to-sgmii-converter: phandle to the TSE SGMII converter
-
-This device node has additional phandle dependency, the sgmii converter:
-
-Required properties:
- - compatible	: Should be altr,gmii-to-sgmii-2.0
- - reg-names	: Should be "eth_tse_control_port"
-
-Example:
-
-gmii_to_sgmii_converter: phy@100000240 {
-	compatible = "altr,gmii-to-sgmii-2.0";
-	reg = <0x00000001 0x00000240 0x00000008>,
-		<0x00000001 0x00000200 0x00000040>;
-	reg-names = "eth_tse_control_port";
-	clocks = <&sgmii_1_clk_0 &emac1 1 &sgmii_clk_125 &sgmii_clk_125>;
-	clock-names = "tse_pcs_ref_clk_clock_connection", "tse_rx_cdr_refclk";
-};
-
-gmac0: ethernet@ff700000 {
-	compatible = "altr,socfpga-stmmac", "snps,dwmac-3.70a", "snps,dwmac";
-	altr,sysmgr-syscon = <&sysmgr 0x60 0>;
-	reg = <0xff700000 0x2000>;
-	interrupts = <0 115 4>;
-	interrupt-names = "macirq";
-	mac-address = [00 00 00 00 00 00];/* Filled in by U-Boot */
-	clocks = <&emac_0_clk>;
-	clock-names = "stmmaceth";
-	phy-mode = "sgmii";
-	altr,gmii-to-sgmii-converter = <&gmii_to_sgmii_converter>;
-};

MAINTAINERS

···
 S:	Maintained
 F:	drivers/clk/socfpga/
 
+ARM/SOCFPGA DWMAC GLUE LAYER BINDINGS
+M:	Matthew Gerlach <[e-mail]>
+S:	Maintained
+F:	Documentation/devicetree/bindings/net/altr,gmii-to-sgmii-2.0.yaml
+F:	Documentation/devicetree/bindings/net/altr,socfpga-stmmac.yaml
+
 ARM/SOCFPGA DWMAC GLUE LAYER
 M:	Maxime Chevallier <[e-mail]>
 S:	Maintained
-F:	Documentation/devicetree/bindings/net/socfpga-dwmac.txt
 F:	drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c
 
 ARM/SOCFPGA EDAC BINDINGS