tty: serial: uartlite: register uart driver in init

When two instances of uart devices are probing, a concurrency race can
occur. If one thread calls uart_register_driver function, which first
allocates and assigns memory to 'uart_state' member of uart_driver
structure, the other instance can bypass uart driver registration and
call ulite_assign. This calls uart_add_one_port, which expects the uart
driver to be fully initialized. This leads to a kernel panic due to a
null pointer dereference:

[ 8.143581] BUG: kernel NULL pointer dereference, address: 00000000000002b8
[ 8.156982] #PF: supervisor write access in kernel mode
[ 8.156984] #PF: error_code(0x0002) - not-present page
[ 8.156986] PGD 0 P4D 0
...
[ 8.180668] RIP: 0010:mutex_lock+0x19/0x30
[ 8.188624] Call Trace:
[ 8.188629] ? __die_body.cold+0x1a/0x1f
[ 8.195260] ? page_fault_oops+0x15c/0x290
[ 8.209183] ? __irq_resolve_mapping+0x47/0x80
[ 8.209187] ? exc_page_fault+0x64/0x140
[ 8.209190] ? asm_exc_page_fault+0x22/0x30
[ 8.209196] ? mutex_lock+0x19/0x30
[ 8.223116] uart_add_one_port+0x60/0x440
[ 8.223122] ? proc_tty_register_driver+0x43/0x50
[ 8.223126] ? tty_register_driver+0x1ca/0x1e0
[ 8.246250] ulite_probe+0x357/0x4b0 [uartlite]

To prevent it, move uart driver registration in to init function. This
will ensure that uart_driver is always registered when probe function
is called.

Signed-off-by: Jakub Lewalski <[e-mail]>
Signed-off-by: Elodie Decerle <[e-mail]>
Link: https://lore.kernel.org/r/[e-mail]
Signed-off-by: Greg Kroah-Hartman <[e-mail]>

drivers/tty/serial/uartlite.c

···
 	pm_runtime_set_active(&pdev->dev);
 	pm_runtime_enable(&pdev->dev);
 
-	if (!ulite_uart_driver.state) {
-		dev_dbg(&pdev->dev, "uartlite: calling uart_register_driver()\n");
-		ret = uart_register_driver(&ulite_uart_driver);
-		if (ret < 0) {
-			dev_err(&pdev->dev, "Failed to register driver\n");
-			clk_disable_unprepare(pdata->clk);
-			return ret;
-		}
-	}
-
 	ret = ulite_assign(&pdev->dev, id, res->start, irq, pdata);
 
 	pm_runtime_mark_last_busy(&pdev->dev);
···
 
 static int __init ulite_init(void)
 {
+	int ret;
+
+	pr_debug("uartlite: calling uart_register_driver()\n");
+	ret = uart_register_driver(&ulite_uart_driver);
+	if (ret)
+		return ret;
 
 	pr_debug("uartlite: calling platform_driver_register()\n");
-	return platform_driver_register(&ulite_platform_driver);
+	ret = platform_driver_register(&ulite_platform_driver);
+	if (ret)
+		uart_unregister_driver(&ulite_uart_driver);
+
+	return ret;
 }
 
 static void __exit ulite_exit(void)
 {
 	platform_driver_unregister(&ulite_platform_driver);
-	if (ulite_uart_driver.state)
-		uart_unregister_driver(&ulite_uart_driver);
+	uart_unregister_driver(&ulite_uart_driver);
 }
 
 module_init(ulite_init);