Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC fixes from Olof Johansson:
"Volume is a little higher than usual due to a set of gpio fixes for
Davinci platforms that's been around a while, still seemed appropriate
to not hold off until next merge window.

Besides that it's the usual mix of minor fixes, mostly corrections of
small stuff in device trees.

Major stability-related one is the removal of a regulator from DT on
Rock960, since DVFS caused undervoltage. I expect it'll be restored
once they figure out the underlying issue"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (28 commits)
MAINTAINERS: Remove unused Qualcomm SoC mailing list
ARM: davinci: dm644x: set the GPIO base to 0
ARM: davinci: da830: set the GPIO base to 0
ARM: davinci: dm355: set the GPIO base to 0
ARM: davinci: dm646x: set the GPIO base to 0
ARM: davinci: dm365: set the GPIO base to 0
ARM: davinci: da850: set the GPIO base to 0
gpio: davinci: restore a way to manually specify the GPIO base
ARM: davinci: dm644x: define gpio interrupts as separate resources
ARM: davinci: dm355: define gpio interrupts as separate resources
ARM: davinci: dm646x: define gpio interrupts as separate resources
ARM: davinci: dm365: define gpio interrupts as separate resources
ARM: davinci: da8xx: define gpio interrupts as separate resources
ARM: dts: at91: sama5d2: use the divided clock for SMC
ARM: dts: imx51-zii-rdu1: Remove EEPROM node
ARM: dts: rockchip: Remove @0 from the veyron memory node
arm64: dts: rockchip: Fix PCIe reset polarity for rk3399-puma-haikou.
arm64: dts: qcom: msm8998: Reserve gpio ranges on MTP
arm64: dts: sdm845-mtp: Reserve reserved gpios
arm64: dts: ti: k3-am654: Fix wakeup_uart reg address
...

MAINTAINERS

···
 M:	Andy Gross <[e-mail]>
 M:	David Brown <[e-mail]>
 L:	[e-mail]
-L:	[e-mail]
 S:	Maintained
 F:	Documentation/devicetree/bindings/soc/qcom/
 F:	arch/arm/boot/dts/qcom-*.dts
···
 BROADCOM BCM5301X ARM ARCHITECTURE
 M:	Hauke Mehrtens <[e-mail]>
 M:	Rafał Miłecki <[e-mail]>
-M:	Jon Mason <[e-mail]>
 M:	[e-mail]
 L:	[e-mail]
 S:	Maintained
···
 BROADCOM IPROC ARM ARCHITECTURE
 M:	Ray Jui <[e-mail]>
 M:	Scott Branden <[e-mail]>
-M:	Jon Mason <[e-mail]>
 M:	[e-mail]
 L:	[e-mail] (moderated for non-subscribers)
 T:	git git://github.com/broadcom/cygnus-linux.git

arch/arm/boot/dts/am3517-evm.dts

···
 	vmmc-supply = <&vmmc_fixed>;
 	bus-width = <4>;
 	wp-gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>; /* gpio_126 */
-	cd-gpios = <&gpio4 31 GPIO_ACTIVE_HIGH>; /* gpio_127 */
+	cd-gpios = <&gpio4 31 GPIO_ACTIVE_LOW>; /* gpio_127 */
 };
 
 &mmc3 {

arch/arm/boot/dts/am3517-som.dtsi

···
 		compatible = "ti,wl1271";
 		reg = <2>;
 		interrupt-parent = <&gpio6>;
-		interrupts = <10 IRQ_TYPE_LEVEL_HIGH>; /* gpio_170 */
+		interrupts = <10 IRQ_TYPE_EDGE_RISING>; /* gpio_170 */
 		ref-clock-frequency = <26000000>;
 		tcxo-clock-frequency = <26000000>;
 	};

arch/arm/boot/dts/imx51-zii-rdu1.dts

···
 	pinctrl-0 = <&pinctrl_i2c2>;
 	status = "okay";
 
-	eeprom@50 {
-		compatible = "atmel,24c04";
-		pagesize = <16>;
-		reg = <0x50>;
-	};
-
 	hpa1: amp@60 {
 		compatible = "ti,tpa6130a2";
 		reg = <0x60>;

arch/arm/boot/dts/logicpd-som-lv.dtsi

···
 };
 
 &mmc3 {
-	interrupts-extended = <&intc 94 &omap3_pmx_core2 0x46>;
+	interrupts-extended = <&intc 94 &omap3_pmx_core 0x136>;
 	pinctrl-0 = <&mmc3_pins &wl127x_gpio>;
 	pinctrl-names = "default";
 	vmmc-supply = <&wl12xx_vmmc>;

arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts

···
  * jumpering combinations for the long run.
  */
 &mmc3 {
-	interrupts-extended = <&intc 94 &omap3_pmx_core2 0x46>;
+	interrupts-extended = <&intc 94 &omap3_pmx_core 0x136>;
 	pinctrl-0 = <&mmc3_pins &mmc3_core2_pins>;
 	pinctrl-names = "default";
 	vmmc-supply = <&wl12xx_vmmc>;

arch/arm/boot/dts/rk3288-veyron.dtsi

···
 #include "rk3288.dtsi"
 
 / {
-	memory@0 {
+	/*
+	 * The default coreboot on veyron devices ignores memory@0 nodes
+	 * and would instead create another memory node.
+	 */
+	memory {
 		device_type = "memory";
 		reg = <0x0 0x0 0x0 0x80000000>;
 	};

arch/arm/boot/dts/sama5d2.dtsi

···
 				  0x1 0x0 0x60000000 0x10000000
 				  0x2 0x0 0x70000000 0x10000000
 				  0x3 0x0 0x80000000 0x10000000>;
-			clocks = <&mck>;
+			clocks = <&h32ck>;
 			status = "disabled";
 
 			nand_controller: nand-controller {

arch/arm/mach-davinci/da830.c

···
 };
 
 static struct davinci_gpio_platform_data da830_gpio_platform_data = {
-	.ngpio = 128,
+	.no_auto_base	= true,
+	.base		= 0,
+	.ngpio		= 128,
 };
 
 int __init da830_register_gpio(void)

arch/arm/mach-davinci/da850.c

···
 }
 
 static struct davinci_gpio_platform_data da850_gpio_platform_data = {
-	.ngpio = 144,
+	.no_auto_base	= true,
+	.base		= 0,
+	.ngpio		= 144,
 };
 
 int __init da850_register_gpio(void)

arch/arm/mach-davinci/devices-da8xx.c

···
 	},
 	{ /* interrupt */
 		.start	= IRQ_DA8XX_GPIO0,
+		.end	= IRQ_DA8XX_GPIO0,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DA8XX_GPIO1,
+		.end	= IRQ_DA8XX_GPIO1,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DA8XX_GPIO2,
+		.end	= IRQ_DA8XX_GPIO2,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DA8XX_GPIO3,
+		.end	= IRQ_DA8XX_GPIO3,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DA8XX_GPIO4,
+		.end	= IRQ_DA8XX_GPIO4,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DA8XX_GPIO5,
+		.end	= IRQ_DA8XX_GPIO5,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DA8XX_GPIO6,
+		.end	= IRQ_DA8XX_GPIO6,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DA8XX_GPIO7,
+		.end	= IRQ_DA8XX_GPIO7,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DA8XX_GPIO8,
 		.end	= IRQ_DA8XX_GPIO8,
 		.flags	= IORESOURCE_IRQ,
 	},

arch/arm/mach-davinci/dm355.c

···
 	},
 	{	/* interrupt */
 		.start	= IRQ_DM355_GPIOBNK0,
+		.end	= IRQ_DM355_GPIOBNK0,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DM355_GPIOBNK1,
+		.end	= IRQ_DM355_GPIOBNK1,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DM355_GPIOBNK2,
+		.end	= IRQ_DM355_GPIOBNK2,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DM355_GPIOBNK3,
+		.end	= IRQ_DM355_GPIOBNK3,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DM355_GPIOBNK4,
+		.end	= IRQ_DM355_GPIOBNK4,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DM355_GPIOBNK5,
+		.end	= IRQ_DM355_GPIOBNK5,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DM355_GPIOBNK6,
 		.end	= IRQ_DM355_GPIOBNK6,
 		.flags	= IORESOURCE_IRQ,
 	},
 };
 
 static struct davinci_gpio_platform_data dm355_gpio_platform_data = {
+	.no_auto_base	= true,
+	.base		= 0,
 	.ngpio		= 104,
 };
 

arch/arm/mach-davinci/dm365.c

···
 	},
 	{	/* interrupt */
 		.start	= IRQ_DM365_GPIO0,
+		.end	= IRQ_DM365_GPIO0,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DM365_GPIO1,
+		.end	= IRQ_DM365_GPIO1,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DM365_GPIO2,
+		.end	= IRQ_DM365_GPIO2,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DM365_GPIO3,
+		.end	= IRQ_DM365_GPIO3,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DM365_GPIO4,
+		.end	= IRQ_DM365_GPIO4,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DM365_GPIO5,
+		.end	= IRQ_DM365_GPIO5,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DM365_GPIO6,
+		.end	= IRQ_DM365_GPIO6,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DM365_GPIO7,
 		.end	= IRQ_DM365_GPIO7,
 		.flags	= IORESOURCE_IRQ,
 	},
 };
 
 static struct davinci_gpio_platform_data dm365_gpio_platform_data = {
+	.no_auto_base	= true,
+	.base		= 0,
 	.ngpio		= 104,
 	.gpio_unbanked	= 8,
 };

arch/arm/mach-davinci/dm644x.c

···
 	},
 	{	/* interrupt */
 		.start	= IRQ_GPIOBNK0,
+		.end	= IRQ_GPIOBNK0,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_GPIOBNK1,
+		.end	= IRQ_GPIOBNK1,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_GPIOBNK2,
+		.end	= IRQ_GPIOBNK2,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_GPIOBNK3,
+		.end	= IRQ_GPIOBNK3,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_GPIOBNK4,
 		.end	= IRQ_GPIOBNK4,
 		.flags	= IORESOURCE_IRQ,
 	},
 };
 
 static struct davinci_gpio_platform_data dm644_gpio_platform_data = {
+	.no_auto_base	= true,
+	.base		= 0,
 	.ngpio		= 71,
 };
 

arch/arm/mach-davinci/dm646x.c

···
 	},
 	{	/* interrupt */
 		.start	= IRQ_DM646X_GPIOBNK0,
+		.end	= IRQ_DM646X_GPIOBNK0,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DM646X_GPIOBNK1,
+		.end	= IRQ_DM646X_GPIOBNK1,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DM646X_GPIOBNK2,
 		.end	= IRQ_DM646X_GPIOBNK2,
 		.flags	= IORESOURCE_IRQ,
 	},
 };
 
 static struct davinci_gpio_platform_data dm646x_gpio_platform_data = {
+	.no_auto_base	= true,
+	.base		= 0,
 	.ngpio		= 43,
 };
 

arch/arm/mach-omap1/board-ams-delta.c

···
 	struct modem_private_data *priv = port->private_data;
 	int ret;
 
+	if (!priv)
+		return;
+
 	if (IS_ERR(priv->regulator))
 		return;
 

arch/arm/mach-omap2/prm44xx.c

···
  * to occur, WAKEUPENABLE bits must be set in the pad mux registers, and
  * omap44xx_prm_reconfigure_io_chain() must be called.  No return value.
  */
-static void __init omap44xx_prm_enable_io_wakeup(void)
+static void omap44xx_prm_enable_io_wakeup(void)
 {
 	s32 inst = omap4_prmst_get_prm_dev_inst();
 

arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi

···
 		};
 	};
 };
+
+&tlmm {
+	gpio-reserved-ranges = <0 4>, <81 4>;
+};

arch/arm64/boot/dts/qcom/sdm845-mtp.dts

···
 	status = "okay";
 };
 
+&tlmm {
+	gpio-reserved-ranges = <0 4>, <81 4>;
+};
+
 &uart9 {
 	status = "okay";
 };

arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts

···
 };
 
 &pcie0 {
-	ep-gpios = <&gpio4 RK_PC6 GPIO_ACTIVE_LOW>;
+	ep-gpios = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>;
 	num-lanes = <4>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pcie_clkreqn_cpm>;

arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi

···
 		regulator-always-on;
 		vin-supply = <&vcc_sys>;
 	};
-
-	vdd_log: vdd-log {
-		compatible = "pwm-regulator";
-		pwms = <&pwm2 0 25000 0>;
-		regulator-name = "vdd_log";
-		regulator-min-microvolt = <800000>;
-		regulator-max-microvolt = <1400000>;
-		regulator-always-on;
-		regulator-boot-on;
-		vin-supply = <&vcc_sys>;
-	};
-
 };
 
 &cpu_l0 {

arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi

···
 
 	wkup_uart0: serial@42300000 {
 		compatible = "ti,am654-uart";
-		reg = <0x00 0x42300000 0x00 0x100>;
+		reg = <0x42300000 0x100>;
 		reg-shift = <2>;
 		reg-io-width = <4>;
 		interrupts = <GIC_SPI 697 IRQ_TYPE_LEVEL_HIGH>;

drivers/gpio/gpio-davinci.c

···
 	chips->chip.set = davinci_gpio_set;
 
 	chips->chip.ngpio = ngpio;
-	chips->chip.base = -1;
+	chips->chip.base = pdata->no_auto_base ? pdata->base : -1;
 
 #ifdef CONFIG_OF_GPIO
 	chips->chip.of_gpio_n_cells = 2;

include/linux/platform_data/gpio-davinci.h

···
 #define __DAVINCI_GPIO_PLATFORM_H
 
 struct davinci_gpio_platform_data {
+	bool	no_auto_base;
+	u32	base;
 	u32	ngpio;
 	u32	gpio_unbanked;
 };