Staging: dt3155: fix 50Hz configuration

According to the header file, dt3155_io.h, the 50/60 Hz configuration
is controlled by a bit in the I2C CSR2 register (bit 2). The function
dt3155_init_isr actually reads the I2C CONFIG register into the global
I2C_CSR union variable then modifies the bit. It then does a write
to the I2C CONFIG register with the global I2C_CONFIG union variable
which is not even set with a value anywhere in the driver.

My guess is 50Hz operation doesn't even work as-is.

Fix this by actually reading and writing the correct register with
the correct value.

Signed-off-by: H Hartley Sweeten <[e-mail]>
Cc: Simon Horman <[e-mail]>
Signed-off-by: Greg Kroah-Hartman <[e-mail]>

drivers/staging/dt3155/dt3155_drv.c

···
   /* 50/60 Hz should be set before this point but let's make sure it is */
   /* right anyway */
 
-  ReadI2C(dt3155_lbase[ minor ], CONFIG, &i2c_csr2.reg);
+  ReadI2C(dt3155_lbase[ minor ], CSR2, &i2c_csr2.reg);
   i2c_csr2.fld.HZ50 = FORMAT50HZ;
-  WriteI2C(dt3155_lbase[ minor ], CONFIG, i2c_config.reg);
+  WriteI2C(dt3155_lbase[ minor ], CSR2, i2c_csr2.reg);
 
   /* enable busmaster chip, clear flags */