dt-bindings: pinctrl: Add pinctrl for Sophgo CV1800 series SoC.

Add pinctrl support for Sophgo CV1800 series SoC.

Signed-off-by: Inochi Amaoto <[e-mail]>
Reviewed-by: Rob Herring (Arm) <[e-mail]>
Link: https://lore.kernel.org/[e-mail]
Signed-off-by: Linus Walleij <[e-mail]>

Documentation/devicetree/bindings/pinctrl/sophgo,cv1800-pinctrl.yaml

···
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/sophgo,cv1800-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sophgo CV1800 Pin Controller
+
+maintainers:
+  - Inochi Amaoto <[e-mail]>
+
+properties:
+  compatible:
+    enum:
+      - sophgo,cv1800b-pinctrl
+      - sophgo,cv1812h-pinctrl
+      - sophgo,sg2000-pinctrl
+      - sophgo,sg2002-pinctrl
+
+  reg:
+    items:
+      - description: pinctrl for system domain
+      - description: pinctrl for rtc domain
+
+  reg-names:
+    items:
+      - const: sys
+      - const: rtc
+
+  resets:
+    maxItems: 1
+
+patternProperties:
+  '-cfg$':
+    type: object
+    description:
+      A pinctrl node should contain at least one subnode representing the
+      pinctrl groups available on the machine.
+
+    additionalProperties: false
+
+    patternProperties:
+      '-pins$':
+        type: object
+        description: |
+          Each subnode will list the pins it needs, and how they should
+          be configured, with regard to muxer configuration, bias, input
+          enable/disable, input schmitt trigger, slew-rate, drive strength
+          and bus hold state. In addition, all pins in the same subnode
+          should have the same power domain. For configuration detail,
+          refer to https://github.com/sophgo/sophgo-doc/.
+
+        allOf:
+          - $ref: pincfg-node.yaml#
+          - $ref: pinmux-node.yaml#
+
+        properties:
+          pinmux:
+            description: |
+              The list of GPIOs and their mux settings that properties in the
+              node apply to. This should be set using the GPIOMUX or GPIOMUX2
+              macro.
+
+          bias-pull-up:
+            type: boolean
+
+          bias-pull-down:
+            type: boolean
+
+          drive-strength-microamp:
+            description: typical current when output high level.
+
+          input-schmitt-microvolt:
+            description: typical threshold for schmitt trigger.
+
+          power-source:
+            description: power supplies at X mV.
+            enum: [ 1800, 3300 ]
+
+          slew-rate:
+            description: slew rate for output buffer (0 is fast, 1 is slow)
+            enum: [ 0, 1 ]
+
+          bias-bus-hold: true
+
+        required:
+          - pinmux
+          - power-source
+
+        additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - reg-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/pinctrl/pinctrl-cv1800b.h>
+
+    pinctrl@3001000 {
+        compatible = "sophgo,cv1800b-pinctrl";
+        reg = <0x03001000 0x1000>,
+              <0x05027000 0x1000>;
+        reg-names = "sys", "rtc";
+
+        uart0_cfg: uart0-cfg {
+            uart0-pins {
+                pinmux = <PINMUX(PIN_UART0_TX, 0)>,
+                         <PINMUX(PIN_UART0_RX, 0)>;
+                bias-pull-up;
+                drive-strength-microamp = <10800>;
+                input-schmitt-microvolt = <0>;
+                power-source = <3300>;
+                slew-rate = <0>;
+            };
+        };
+    };
+
+...

include/dt-bindings/pinctrl/pinctrl-cv1800b.h

···
+/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */
+/*
+ * Copyright (C) 2024 Inochi Amaoto <[e-mail]>
+ *
+ * This file is generated from vendor pinout definition.
+ */
+
+#ifndef _DT_BINDINGS_PINCTRL_CV1800B_H
+#define _DT_BINDINGS_PINCTRL_CV1800B_H
+
+#include <dt-bindings/pinctrl/pinctrl-cv18xx.h>
+
+#define PIN_AUD_AOUTR			1
+#define PIN_SD0_CLK			3
+#define PIN_SD0_CMD			4
+#define PIN_SD0_D0			5
+#define PIN_SD0_D1			7
+#define PIN_SD0_D2			8
+#define PIN_SD0_D3			9
+#define PIN_SD0_CD			11
+#define PIN_SD0_PWR_EN			12
+#define PIN_SPK_EN			14
+#define PIN_UART0_TX			15
+#define PIN_UART0_RX			16
+#define PIN_SPINOR_HOLD_X		17
+#define PIN_SPINOR_SCK			18
+#define PIN_SPINOR_MOSI			19
+#define PIN_SPINOR_WP_X			20
+#define PIN_SPINOR_MISO			21
+#define PIN_SPINOR_CS_X			22
+#define PIN_IIC0_SCL			23
+#define PIN_IIC0_SDA			24
+#define PIN_AUX0			25
+#define PIN_PWR_VBAT_DET		30
+#define PIN_PWR_SEQ2			31
+#define PIN_XTAL_XIN			33
+#define PIN_SD1_GPIO0			35
+#define PIN_SD1_GPIO1			36
+#define PIN_SD1_D3			38
+#define PIN_SD1_D2			39
+#define PIN_SD1_D1			40
+#define PIN_SD1_D0			41
+#define PIN_SD1_CMD			42
+#define PIN_SD1_CLK			43
+#define PIN_ADC1			44
+#define PIN_USB_VBUS_DET		45
+#define PIN_ETH_TXP			47
+#define PIN_ETH_TXM			48
+#define PIN_ETH_RXP			49
+#define PIN_ETH_RXM			50
+#define PIN_MIPIRX4N			56
+#define PIN_MIPIRX4P			57
+#define PIN_MIPIRX3N			58
+#define PIN_MIPIRX3P			59
+#define PIN_MIPIRX2N			60
+#define PIN_MIPIRX2P			61
+#define PIN_MIPIRX1N			62
+#define PIN_MIPIRX1P			63
+#define PIN_MIPIRX0N			64
+#define PIN_MIPIRX0P			65
+#define PIN_AUD_AINL_MIC		67
+
+#endif /* _DT_BINDINGS_PINCTRL_CV1800B_H */

include/dt-bindings/pinctrl/pinctrl-cv1812h.h

···
+/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */
+/*
+ * Copyright (C) 2024 Inochi Amaoto <[e-mail]>
+ *
+ * This file is generated from vendor pinout definition.
+ */
+
+#ifndef _DT_BINDINGS_PINCTRL_CV1812H_H
+#define _DT_BINDINGS_PINCTRL_CV1812H_H
+
+#include <dt-bindings/pinctrl/pinctrl-cv18xx.h>
+
+#define PINPOS(row, col)			\
+	((((row) - 'A' + 1) << 8) + ((col) - 1))
+
+#define PIN_MIPI_TXM4			PINPOS('A', 2)
+#define PIN_MIPIRX0N			PINPOS('A', 4)
+#define PIN_MIPIRX3P			PINPOS('A', 6)
+#define PIN_MIPIRX4P			PINPOS('A', 7)
+#define PIN_VIVO_D2			PINPOS('A', 9)
+#define PIN_VIVO_D3			PINPOS('A', 10)
+#define PIN_VIVO_D10			PINPOS('A', 12)
+#define PIN_USB_VBUS_DET		PINPOS('A', 13)
+#define PIN_MIPI_TXP3			PINPOS('B', 1)
+#define PIN_MIPI_TXM3			PINPOS('B', 2)
+#define PIN_MIPI_TXP4			PINPOS('B', 3)
+#define PIN_MIPIRX0P			PINPOS('B', 4)
+#define PIN_MIPIRX1N			PINPOS('B', 5)
+#define PIN_MIPIRX2N			PINPOS('B', 6)
+#define PIN_MIPIRX4N			PINPOS('B', 7)
+#define PIN_MIPIRX5N			PINPOS('B', 8)
+#define PIN_VIVO_D1			PINPOS('B', 9)
+#define PIN_VIVO_D5			PINPOS('B', 10)
+#define PIN_VIVO_D7			PINPOS('B', 11)
+#define PIN_VIVO_D9			PINPOS('B', 12)
+#define PIN_USB_ID			PINPOS('B', 13)
+#define PIN_ETH_RXM			PINPOS('B', 15)
+#define PIN_MIPI_TXP2			PINPOS('C', 1)
+#define PIN_MIPI_TXM2			PINPOS('C', 2)
+#define PIN_CAM_PD0			PINPOS('C', 3)
+#define PIN_CAM_MCLK0			PINPOS('C', 4)
+#define PIN_MIPIRX1P			PINPOS('C', 5)
+#define PIN_MIPIRX2P			PINPOS('C', 6)
+#define PIN_MIPIRX3N			PINPOS('C', 7)
+#define PIN_MIPIRX5P			PINPOS('C', 8)
+#define PIN_VIVO_CLK			PINPOS('C', 9)
+#define PIN_VIVO_D6			PINPOS('C', 10)
+#define PIN_VIVO_D8			PINPOS('C', 11)
+#define PIN_USB_VBUS_EN			PINPOS('C', 12)
+#define PIN_ETH_RXP			PINPOS('C', 14)
+#define PIN_GPIO_RTX			PINPOS('C', 15)
+#define PIN_MIPI_TXP1			PINPOS('D', 1)
+#define PIN_MIPI_TXM1			PINPOS('D', 2)
+#define PIN_CAM_MCLK1			PINPOS('D', 3)
+#define PIN_IIC3_SCL			PINPOS('D', 4)
+#define PIN_VIVO_D4			PINPOS('D', 10)
+#define PIN_ETH_TXM			PINPOS('D', 14)
+#define PIN_ETH_TXP			PINPOS('D', 15)
+#define PIN_MIPI_TXP0			PINPOS('E', 1)
+#define PIN_MIPI_TXM0			PINPOS('E', 2)
+#define PIN_CAM_PD1			PINPOS('E', 4)
+#define PIN_CAM_RST0			PINPOS('E', 5)
+#define PIN_VIVO_D0			PINPOS('E', 10)
+#define PIN_ADC1			PINPOS('E', 13)
+#define PIN_ADC2			PINPOS('E', 14)
+#define PIN_ADC3			PINPOS('E', 15)
+#define PIN_AUD_AOUTL			PINPOS('F', 2)
+#define PIN_IIC3_SDA			PINPOS('F', 4)
+#define PIN_SD1_D2			PINPOS('F', 14)
+#define PIN_AUD_AOUTR			PINPOS('G', 2)
+#define PIN_SD1_D3			PINPOS('G', 13)
+#define PIN_SD1_CLK			PINPOS('G', 14)
+#define PIN_SD1_CMD			PINPOS('G', 15)
+#define PIN_AUD_AINL_MIC		PINPOS('H', 1)
+#define PIN_RSTN			PINPOS('H', 12)
+#define PIN_PWM0_BUCK			PINPOS('H', 13)
+#define PIN_SD1_D1			PINPOS('H', 14)
+#define PIN_SD1_D0			PINPOS('H', 15)
+#define PIN_AUD_AINR_MIC		PINPOS('J', 1)
+#define PIN_IIC2_SCL			PINPOS('J', 13)
+#define PIN_IIC2_SDA			PINPOS('J', 14)
+#define PIN_SD0_CD			PINPOS('K', 2)
+#define PIN_SD0_D1			PINPOS('K', 3)
+#define PIN_UART2_RX			PINPOS('K', 13)
+#define PIN_UART2_CTS			PINPOS('K', 14)
+#define PIN_UART2_TX			PINPOS('K', 15)
+#define PIN_SD0_CLK			PINPOS('L', 1)
+#define PIN_SD0_D0			PINPOS('L', 2)
+#define PIN_SD0_CMD			PINPOS('L', 3)
+#define PIN_CLK32K			PINPOS('L', 14)
+#define PIN_UART2_RTS			PINPOS('L', 15)
+#define PIN_SD0_D3			PINPOS('M', 1)
+#define PIN_SD0_D2			PINPOS('M', 2)
+#define PIN_UART0_RX			PINPOS('M', 4)
+#define PIN_UART0_TX			PINPOS('M', 5)
+#define PIN_JTAG_CPU_TRST		PINPOS('M', 6)
+#define PIN_PWR_ON			PINPOS('M', 11)
+#define PIN_PWR_GPIO2			PINPOS('M', 12)
+#define PIN_PWR_GPIO0			PINPOS('M', 13)
+#define PIN_CLK25M			PINPOS('M', 14)
+#define PIN_SD0_PWR_EN			PINPOS('N', 1)
+#define PIN_SPK_EN			PINPOS('N', 3)
+#define PIN_JTAG_CPU_TCK		PINPOS('N', 4)
+#define PIN_JTAG_CPU_TMS		PINPOS('N', 6)
+#define PIN_PWR_WAKEUP1			PINPOS('N', 11)
+#define PIN_PWR_WAKEUP0			PINPOS('N', 12)
+#define PIN_PWR_GPIO1			PINPOS('N', 13)
+#define PIN_EMMC_DAT3			PINPOS('P', 1)
+#define PIN_EMMC_DAT0			PINPOS('P', 2)
+#define PIN_EMMC_DAT2			PINPOS('P', 3)
+#define PIN_EMMC_RSTN			PINPOS('P', 4)
+#define PIN_AUX0			PINPOS('P', 5)
+#define PIN_IIC0_SDA			PINPOS('P', 6)
+#define PIN_PWR_SEQ3			PINPOS('P', 10)
+#define PIN_PWR_VBAT_DET		PINPOS('P', 11)
+#define PIN_PWR_SEQ1			PINPOS('P', 12)
+#define PIN_PWR_BUTTON1			PINPOS('P', 13)
+#define PIN_EMMC_DAT1			PINPOS('R', 2)
+#define PIN_EMMC_CMD			PINPOS('R', 3)
+#define PIN_EMMC_CLK			PINPOS('R', 4)
+#define PIN_IIC0_SCL			PINPOS('R', 6)
+#define PIN_GPIO_ZQ			PINPOS('R', 10)
+#define PIN_PWR_RSTN			PINPOS('R', 11)
+#define PIN_PWR_SEQ2			PINPOS('R', 12)
+#define PIN_XTAL_XIN			PINPOS('R', 13)
+
+#endif /* _DT_BINDINGS_PINCTRL_CV1812H_H */

include/dt-bindings/pinctrl/pinctrl-cv18xx.h

···
+/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */
+/*
+ * Copyright (C) 2023 Sophgo Ltd.
+ *
+ * Author: Inochi Amaoto <[e-mail]>
+ */
+
+#ifndef _DT_BINDINGS_PINCTRL_CV18XX_H
+#define _DT_BINDINGS_PINCTRL_CV18XX_H
+
+#define PIN_MUX_INVALD				0xff
+
+#define PINMUX2(pin, mux, mux2)	\
+	(((pin) & 0xffff) | (((mux) & 0xff) << 16) | (((mux2) & 0xff) << 24))
+
+#define PINMUX(pin, mux) \
+	PINMUX2(pin, mux, PIN_MUX_INVALD)
+
+#endif /* _DT_BINDINGS_PINCTRL_CV18XX_H */

include/dt-bindings/pinctrl/pinctrl-sg2000.h

···
+/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */
+/*
+ * Copyright (C) 2024 Inochi Amaoto <[e-mail]>
+ *
+ * This file is generated from vendor pinout definition.
+ */
+
+#ifndef _DT_BINDINGS_PINCTRL_SG2000_H
+#define _DT_BINDINGS_PINCTRL_SG2000_H
+
+#include <dt-bindings/pinctrl/pinctrl-cv18xx.h>
+
+#define PINPOS(row, col)			\
+	((((row) - 'A' + 1) << 8) + ((col) - 1))
+
+#define PIN_MIPI_TXM4			PINPOS('A', 2)
+#define PIN_MIPIRX0N			PINPOS('A', 4)
+#define PIN_MIPIRX3P			PINPOS('A', 6)
+#define PIN_MIPIRX4P			PINPOS('A', 7)
+#define PIN_VIVO_D2			PINPOS('A', 9)
+#define PIN_VIVO_D3			PINPOS('A', 10)
+#define PIN_VIVO_D10			PINPOS('A', 12)
+#define PIN_USB_VBUS_DET		PINPOS('A', 13)
+#define PIN_MIPI_TXP3			PINPOS('B', 1)
+#define PIN_MIPI_TXM3			PINPOS('B', 2)
+#define PIN_MIPI_TXP4			PINPOS('B', 3)
+#define PIN_MIPIRX0P			PINPOS('B', 4)
+#define PIN_MIPIRX1N			PINPOS('B', 5)
+#define PIN_MIPIRX2N			PINPOS('B', 6)
+#define PIN_MIPIRX4N			PINPOS('B', 7)
+#define PIN_MIPIRX5N			PINPOS('B', 8)
+#define PIN_VIVO_D1			PINPOS('B', 9)
+#define PIN_VIVO_D5			PINPOS('B', 10)
+#define PIN_VIVO_D7			PINPOS('B', 11)
+#define PIN_VIVO_D9			PINPOS('B', 12)
+#define PIN_USB_ID			PINPOS('B', 13)
+#define PIN_ETH_RXM			PINPOS('B', 15)
+#define PIN_MIPI_TXP2			PINPOS('C', 1)
+#define PIN_MIPI_TXM2			PINPOS('C', 2)
+#define PIN_CAM_PD0			PINPOS('C', 3)
+#define PIN_CAM_MCLK0			PINPOS('C', 4)
+#define PIN_MIPIRX1P			PINPOS('C', 5)
+#define PIN_MIPIRX2P			PINPOS('C', 6)
+#define PIN_MIPIRX3N			PINPOS('C', 7)
+#define PIN_MIPIRX5P			PINPOS('C', 8)
+#define PIN_VIVO_CLK			PINPOS('C', 9)
+#define PIN_VIVO_D6			PINPOS('C', 10)
+#define PIN_VIVO_D8			PINPOS('C', 11)
+#define PIN_USB_VBUS_EN			PINPOS('C', 12)
+#define PIN_ETH_RXP			PINPOS('C', 14)
+#define PIN_GPIO_RTX			PINPOS('C', 15)
+#define PIN_MIPI_TXP1			PINPOS('D', 1)
+#define PIN_MIPI_TXM1			PINPOS('D', 2)
+#define PIN_CAM_MCLK1			PINPOS('D', 3)
+#define PIN_IIC3_SCL			PINPOS('D', 4)
+#define PIN_VIVO_D4			PINPOS('D', 10)
+#define PIN_ETH_TXM			PINPOS('D', 14)
+#define PIN_ETH_TXP			PINPOS('D', 15)
+#define PIN_MIPI_TXP0			PINPOS('E', 1)
+#define PIN_MIPI_TXM0			PINPOS('E', 2)
+#define PIN_CAM_PD1			PINPOS('E', 4)
+#define PIN_CAM_RST0			PINPOS('E', 5)
+#define PIN_VIVO_D0			PINPOS('E', 10)
+#define PIN_ADC1			PINPOS('E', 13)
+#define PIN_ADC2			PINPOS('E', 14)
+#define PIN_ADC3			PINPOS('E', 15)
+#define PIN_AUD_AOUTL			PINPOS('F', 2)
+#define PIN_IIC3_SDA			PINPOS('F', 4)
+#define PIN_SD1_D2			PINPOS('F', 14)
+#define PIN_AUD_AOUTR			PINPOS('G', 2)
+#define PIN_SD1_D3			PINPOS('G', 13)
+#define PIN_SD1_CLK			PINPOS('G', 14)
+#define PIN_SD1_CMD			PINPOS('G', 15)
+#define PIN_AUD_AINL_MIC		PINPOS('H', 1)
+#define PIN_RSTN			PINPOS('H', 12)
+#define PIN_PWM0_BUCK			PINPOS('H', 13)
+#define PIN_SD1_D1			PINPOS('H', 14)
+#define PIN_SD1_D0			PINPOS('H', 15)
+#define PIN_AUD_AINR_MIC		PINPOS('J', 1)
+#define PIN_IIC2_SCL			PINPOS('J', 13)
+#define PIN_IIC2_SDA			PINPOS('J', 14)
+#define PIN_SD0_CD			PINPOS('K', 2)
+#define PIN_SD0_D1			PINPOS('K', 3)
+#define PIN_UART2_RX			PINPOS('K', 13)
+#define PIN_UART2_CTS			PINPOS('K', 14)
+#define PIN_UART2_TX			PINPOS('K', 15)
+#define PIN_SD0_CLK			PINPOS('L', 1)
+#define PIN_SD0_D0			PINPOS('L', 2)
+#define PIN_SD0_CMD			PINPOS('L', 3)
+#define PIN_CLK32K			PINPOS('L', 14)
+#define PIN_UART2_RTS			PINPOS('L', 15)
+#define PIN_SD0_D3			PINPOS('M', 1)
+#define PIN_SD0_D2			PINPOS('M', 2)
+#define PIN_UART0_RX			PINPOS('M', 4)
+#define PIN_UART0_TX			PINPOS('M', 5)
+#define PIN_JTAG_CPU_TRST		PINPOS('M', 6)
+#define PIN_PWR_ON			PINPOS('M', 11)
+#define PIN_PWR_GPIO2			PINPOS('M', 12)
+#define PIN_PWR_GPIO0			PINPOS('M', 13)
+#define PIN_CLK25M			PINPOS('M', 14)
+#define PIN_SD0_PWR_EN			PINPOS('N', 1)
+#define PIN_SPK_EN			PINPOS('N', 3)
+#define PIN_JTAG_CPU_TCK		PINPOS('N', 4)
+#define PIN_JTAG_CPU_TMS		PINPOS('N', 6)
+#define PIN_PWR_WAKEUP1			PINPOS('N', 11)
+#define PIN_PWR_WAKEUP0			PINPOS('N', 12)
+#define PIN_PWR_GPIO1			PINPOS('N', 13)
+#define PIN_EMMC_DAT3			PINPOS('P', 1)
+#define PIN_EMMC_DAT0			PINPOS('P', 2)
+#define PIN_EMMC_DAT2			PINPOS('P', 3)
+#define PIN_EMMC_RSTN			PINPOS('P', 4)
+#define PIN_AUX0			PINPOS('P', 5)
+#define PIN_IIC0_SDA			PINPOS('P', 6)
+#define PIN_PWR_SEQ3			PINPOS('P', 10)
+#define PIN_PWR_VBAT_DET		PINPOS('P', 11)
+#define PIN_PWR_SEQ1			PINPOS('P', 12)
+#define PIN_PWR_BUTTON1			PINPOS('P', 13)
+#define PIN_EMMC_DAT1			PINPOS('R', 2)
+#define PIN_EMMC_CMD			PINPOS('R', 3)
+#define PIN_EMMC_CLK			PINPOS('R', 4)
+#define PIN_IIC0_SCL			PINPOS('R', 6)
+#define PIN_GPIO_ZQ			PINPOS('R', 10)
+#define PIN_PWR_RSTN			PINPOS('R', 11)
+#define PIN_PWR_SEQ2			PINPOS('R', 12)
+#define PIN_XTAL_XIN			PINPOS('R', 13)
+
+#endif /* _DT_BINDINGS_PINCTRL_SG2000_H */

include/dt-bindings/pinctrl/pinctrl-sg2002.h

···
+/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */
+/*
+ * Copyright (C) 2024 Inochi Amaoto <[e-mail]>
+ *
+ * This file is generated from vendor pinout definition.
+ */
+
+#ifndef _DT_BINDINGS_PINCTRL_SG2002_H
+#define _DT_BINDINGS_PINCTRL_SG2002_H
+
+#include <dt-bindings/pinctrl/pinctrl-cv18xx.h>
+
+#define PIN_AUD_AINL_MIC		2
+#define PIN_AUD_AOUTR			4
+#define PIN_SD0_CLK			6
+#define PIN_SD0_CMD			7
+#define PIN_SD0_D0			8
+#define PIN_SD0_D1			10
+#define PIN_SD0_D2			11
+#define PIN_SD0_D3			12
+#define PIN_SD0_CD			14
+#define PIN_SD0_PWR_EN			15
+#define PIN_SPK_EN			17
+#define PIN_UART0_TX			18
+#define PIN_UART0_RX			19
+#define PIN_EMMC_DAT2			20
+#define PIN_EMMC_CLK			21
+#define PIN_EMMC_DAT0			22
+#define PIN_EMMC_DAT3			23
+#define PIN_EMMC_CMD			24
+#define PIN_EMMC_DAT1			25
+#define PIN_JTAG_CPU_TMS		26
+#define PIN_JTAG_CPU_TCK		27
+#define PIN_IIC0_SCL			28
+#define PIN_IIC0_SDA			29
+#define PIN_AUX0			30
+#define PIN_GPIO_ZQ			35
+#define PIN_PWR_VBAT_DET		38
+#define PIN_PWR_RSTN			39
+#define PIN_PWR_SEQ1			40
+#define PIN_PWR_SEQ2			41
+#define PIN_PWR_WAKEUP0			43
+#define PIN_PWR_BUTTON1			44
+#define PIN_XTAL_XIN			45
+#define PIN_PWR_GPIO0			47
+#define PIN_PWR_GPIO1			48
+#define PIN_PWR_GPIO2			49
+#define PIN_SD1_D3			51
+#define PIN_SD1_D2			52
+#define PIN_SD1_D1			53
+#define PIN_SD1_D0			54
+#define PIN_SD1_CMD			55
+#define PIN_SD1_CLK			56
+#define PIN_PWM0_BUCK			58
+#define PIN_ADC1			59
+#define PIN_USB_VBUS_DET		60
+#define PIN_ETH_TXP			62
+#define PIN_ETH_TXM			63
+#define PIN_ETH_RXP			64
+#define PIN_ETH_RXM			65
+#define PIN_GPIO_RTX			67
+#define PIN_MIPIRX4N			72
+#define PIN_MIPIRX4P			73
+#define PIN_MIPIRX3N			74
+#define PIN_MIPIRX3P			75
+#define PIN_MIPIRX2N			76
+#define PIN_MIPIRX2P			77
+#define PIN_MIPIRX1N			78
+#define PIN_MIPIRX1P			79
+#define PIN_MIPIRX0N			80
+#define PIN_MIPIRX0P			81
+#define PIN_MIPI_TXM2			83
+#define PIN_MIPI_TXP2			84
+#define PIN_MIPI_TXM1			85
+#define PIN_MIPI_TXP1			86
+#define PIN_MIPI_TXM0			87
+#define PIN_MIPI_TXP0			88
+
+#endif /* _DT_BINDINGS_PINCTRL_SG2002_H */