Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC fixes from Olof Johansson:
"A slightly larger set of fixes have accrued in the last two weeks.
Mostly a collection of the usual smaller fixes:

- Marvell Armada: USB phy setup issues on Turris Mox

- Broadcom: GPIO/pinmux DT mapping corrections for Stingray, MMC bus
width fix for RPi Zero W, GPIO LED removal for RPI CM3. Also some
maintainer updates.

- OMAP: Fixlets for display config, interrupt settings for wifi, some
clock/PM pieces. Also IOMMU regression fix and a ti-sysc
no-watchdog regression fix.

- i.MX: A few fixes around PM/settings, some devicetree fixlets and
catching up with config option changes in DRM

- Rockchip: RockRro64 misc DT fixups, Hugsun X99 USB-C, Kevin display
panel settings

... and some smaller fixes for Davinci (backlight, McBSP DMA),
Allwinner (phy regulators, PMU removal on A64, etc)"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (42 commits)
ARM: dts: stm32: relax qspi pins slew-rate for stm32mp157
MAINTAINERS: Update the Spreadtrum SoC maintainer
MAINTAINERS: Remove Gregory and Brian for ARCH_BRCMSTB
ARM: dts: bcm2837-rpi-cm3: Avoid leds-gpio probing issue
bus: ti-sysc: Fix watchdog quirk handling
ARM: OMAP2+: Add pdata for OMAP3 ISP IOMMU
ARM: OMAP2+: Plug in device_enable/idle ops for IOMMUs
ARM: davinci_all_defconfig: enable GPIO backlight
ARM: davinci: dm365: Fix McBSP dma_slave_map entry
ARM: dts: bcm2835-rpi-zero-w: Fix bus-width of sdhci
ARM: imx_v6_v7_defconfig: Enable CONFIG_DRM_MSM
arm64: dts: imx8mn: Use correct clock for usdhc's ipg clk
arm64: dts: imx8mm: Use correct clock for usdhc's ipg clk
arm64: dts: imx8mq: Use correct clock for usdhc's ipg clk
ARM: dts: imx7s: Correct GPT's ipg clock source
ARM: dts: vf610-zii-scu4-aib: Specify 'i2c-mux-idle-disconnect'
ARM: dts: imx6q-logicpd: Re-Enable SNVS power key
arm64: dts: lx2160a: Correct CPU core idle state name
mailmap: Add Simon Arlott (replacement for expired email address)
arm64: dts: rockchip: Fix override mode for rk3399-kevin panel
...

.mailmap

···
 Shuah Khan <[e-mail]> <[e-mail]>
 Shuah Khan <[e-mail]> <[e-mail]>
 Shuah Khan <[e-mail]> <[e-mail]>
+Simon Arlott <[e-mail]> <[e-mail]>
 Simon Kelley <[e-mail]>
 Stéphane Witzmann <[e-mail]>
 Stephen Hemminger <[e-mail]>

Documentation/devicetree/bindings/arm/rockchip.yaml

···
 
       - description: Theobroma Systems RK3368-uQ7 with Haikou baseboard
         items:
-          - const: tsd,rk3368-uq7-haikou
+          - const: tsd,rk3368-lion-haikou
           - const: rockchip,rk3368
 
       - description: Theobroma Systems RK3399-Q7 with Haikou baseboard
         items:
-          - const: tsd,rk3399-q7-haikou
+          - const: tsd,rk3399-puma-haikou
           - const: rockchip,rk3399
 
       - description: Tronsmart Orion R68 Meta

Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml

···
 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/arm/allwinner,sun4i-a10-csi.yaml#
+$id: http://devicetree.org/schemas/media/allwinner,sun4i-a10-csi.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Allwinner A10 CMOS Sensor Interface (CSI) Device Tree Bindings
···
   clocks:
     items:
       - description: The CSI interface clock
-      - description: The CSI module clock
       - description: The CSI ISP clock
       - description: The CSI DRAM clock
 
   clock-names:
     items:
       - const: bus
-      - const: mod
       - const: isp
       - const: ram
 
···
         compatible = "allwinner,sun7i-a20-csi0";
         reg = <0x01c09000 0x1000>;
         interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
-        clocks = <&ccu CLK_AHB_CSI0>, <&ccu CLK_CSI0>,
-                 <&ccu CLK_CSI_SCLK>, <&ccu CLK_DRAM_CSI0>;
-        clock-names = "bus", "mod", "isp", "ram";
+        clocks = <&ccu CLK_AHB_CSI0>, <&ccu CLK_CSI_SCLK>, <&ccu CLK_DRAM_CSI0>;
+        clock-names = "bus", "isp", "ram";
         resets = <&ccu RST_CSI0>;
 
         port {

MAINTAINERS

···
 
 ARM/SPREADTRUM SoC SUPPORT
 M:	Orson Zhai <[e-mail]>
-M:	Baolin Wang <[e-mail]>
+M:	Baolin Wang <[e-mail]>
 M:	Chunyan Zhang <[e-mail]>
 S:	Maintained
 F:	arch/arm64/boot/dts/sprd
 N:	sprd
+N:	sc27xx
+N:	sc2731
 
 ARM/STI ARCHITECTURE
 M:	Patrice Chotard <[e-mail]>
···
 N:	kona
 F:	arch/arm/mach-bcm/
 
-BROADCOM BCM2835 ARM ARCHITECTURE
+BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE
 M:	Eric Anholt <[e-mail]>
 M:	Stefan Wahren <[e-mail]>
 L:	[e-mail]
···
 L:	[e-mail] (moderated for non-subscribers)
 T:	git git://github.com/anholt/linux
 S:	Maintained
+N:	bcm2711
 N:	bcm2835
 F:	drivers/staging/vc04_services
 
···
 F:	drivers/usb/gadget/udc/bcm63xx_udc.*
 
 BROADCOM BCM7XXX ARM ARCHITECTURE
-M:	Brian Norris <[e-mail]>
-M:	Gregory Fong <[e-mail]>
 M:	Florian Fainelli <[e-mail]>
 M:	[e-mail]
 L:	[e-mail] (moderated for non-subscribers)

arch/arm/boot/dts/am3874-iceboard.dts

···
 		reg = <0x70>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
 
 		i2c@0 {
 			/* FMC A */
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0>;
-			i2c-mux-idle-disconnect;
 		};
 
 		i2c@1 {
···
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <1>;
-			i2c-mux-idle-disconnect;
 		};
 
 		i2c@2 {
···
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <2>;
-			i2c-mux-idle-disconnect;
 		};
 
 		i2c@3 {
···
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <3>;
-			i2c-mux-idle-disconnect;
 		};
 
 		i2c@4 {
···
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <4>;
-			i2c-mux-idle-disconnect;
 		};
 
 		i2c@5 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <5>;
-			i2c-mux-idle-disconnect;
 
 			ina230@40 { compatible = "ti,ina230"; reg = <0x40>; shunt-resistor = <5000>; };
 			ina230@41 { compatible = "ti,ina230"; reg = <0x41>; shunt-resistor = <5000>; };
···
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <6>;
-			i2c-mux-idle-disconnect;
 		};
 
 		i2c@7 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <7>;
-			i2c-mux-idle-disconnect;
 
 			u41: pca9575@20 {
 				compatible = "nxp,pca9575";

arch/arm/boot/dts/bcm2835-rpi-zero-w.dts

···
 	#address-cells = <1>;
 	#size-cells = <0>;
 	pinctrl-0 = <&emmc_gpio34 &gpclk2_gpio43>;
+	bus-width = <4>;
 	mmc-pwrseq = <&wifi_pwrseq>;
 	non-removable;
 	status = "okay";

arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi

···
 		reg = <0 0x40000000>;
 	};
 
+	leds {
+		/*
+		 * Since there is no upstream GPIO driver yet,
+		 * remove the incomplete node.
+		 */
+		/delete-node/ act;
+	};
+
 	reg_3v3: fixed-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "3V3";

arch/arm/boot/dts/imx6-logicpd-som.dtsi

···
 	vin-supply = <&sw1c_reg>;
 };
 
+&snvs_poweroff {
+	status = "okay";
+};
+
 &iomuxc {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_hog>;

arch/arm/boot/dts/imx7s.dtsi

···
 				compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
 				reg = <0x302d0000 0x10000>;
 				interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_CLK_DUMMY>,
+				clocks = <&clks IMX7D_GPT1_ROOT_CLK>,
 					 <&clks IMX7D_GPT1_ROOT_CLK>;
 				clock-names = "ipg", "per";
 			};
···
 				compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
 				reg = <0x302e0000 0x10000>;
 				interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_CLK_DUMMY>,
+				clocks = <&clks IMX7D_GPT2_ROOT_CLK>,
 					 <&clks IMX7D_GPT2_ROOT_CLK>;
 				clock-names = "ipg", "per";
 				status = "disabled";
···
 				compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
 				reg = <0x302f0000 0x10000>;
 				interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_CLK_DUMMY>,
+				clocks = <&clks IMX7D_GPT3_ROOT_CLK>,
 					 <&clks IMX7D_GPT3_ROOT_CLK>;
 				clock-names = "ipg", "per";
 				status = "disabled";
···
 				compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
 				reg = <0x30300000 0x10000>;
 				interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_CLK_DUMMY>,
+				clocks = <&clks IMX7D_GPT4_ROOT_CLK>,
 					 <&clks IMX7D_GPT4_ROOT_CLK>;
 				clock-names = "ipg", "per";
 				status = "disabled";

arch/arm/boot/dts/logicpd-torpedo-som.dtsi

···
 &twl_gpio {
 	ti,use-leds;
 };
+
+&twl_keypad {
+	status = "disabled";
+};

arch/arm/boot/dts/omap4-droid4-xt894.dts

···
 		compatible = "ti,wl1285", "ti,wl1283";
 		reg = <2>;
 		/* gpio_100 with gpmc_wait2 pad as wakeirq */
-		interrupts-extended = <&gpio4 4 IRQ_TYPE_EDGE_RISING>,
+		interrupts-extended = <&gpio4 4 IRQ_TYPE_LEVEL_HIGH>,
 				      <&omap4_pmx_core 0x4e>;
 		interrupt-names = "irq", "wakeup";
 		ref-clock-frequency = <26000000>;

arch/arm/boot/dts/omap4-panda-common.dtsi

···
 		compatible = "ti,wl1271";
 		reg = <2>;
 		/* gpio_53 with gpmc_ncs3 pad as wakeup */
-		interrupts-extended = <&gpio2 21 IRQ_TYPE_EDGE_RISING>,
+		interrupts-extended = <&gpio2 21 IRQ_TYPE_LEVEL_HIGH>,
 				      <&omap4_pmx_core 0x3a>;
 		interrupt-names = "irq", "wakeup";
 		ref-clock-frequency = <38400000>;

arch/arm/boot/dts/omap4-sdp.dts

···
 		compatible = "ti,wl1281";
 		reg = <2>;
 		interrupt-parent = <&gpio1>;
-		interrupts = <21 IRQ_TYPE_EDGE_RISING>; /* gpio 53 */
+		interrupts = <21 IRQ_TYPE_LEVEL_HIGH>; /* gpio 53 */
 		ref-clock-frequency = <26000000>;
 		tcxo-clock-frequency = <26000000>;
 	};

arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi

···
 		compatible = "ti,wl1271";
 		reg = <2>;
 		interrupt-parent = <&gpio2>;
-		interrupts = <9 IRQ_TYPE_EDGE_RISING>; /* gpio 41 */
+		interrupts = <9 IRQ_TYPE_LEVEL_HIGH>; /* gpio 41 */
 		ref-clock-frequency = <38400000>;
 	};
 };

arch/arm/boot/dts/omap5-board-common.dtsi

···
 		pinctrl-names = "default";
 		pinctrl-0 = <&wlcore_irq_pin>;
 		interrupt-parent = <&gpio1>;
-		interrupts = <14 IRQ_TYPE_EDGE_RISING>;	/* gpio 14 */
+		interrupts = <14 IRQ_TYPE_LEVEL_HIGH>;	/* gpio 14 */
 		ref-clock-frequency = <26000000>;
 	};
 };

arch/arm/boot/dts/omap54xx-clocks.dtsi

···
 		};
 	};
 
-	gpu_cm: clock-controller@1500 {
+	gpu_cm: gpu_cm@1500 {
 		compatible = "ti,omap4-cm";
 		reg = <0x1500 0x100>;
 		#address-cells = <1>;

arch/arm/boot/dts/stm32mp157-pinctrl.dtsi

···
 						 <STM32_PINMUX('F', 6, AF9)>; /* QSPI_BK1_IO3 */
 					bias-disable;
 					drive-push-pull;
-					slew-rate = <3>;
+					slew-rate = <1>;
 				};
 				pins2 {
 					pinmux = <STM32_PINMUX('B', 6, AF10)>; /* QSPI_BK1_NCS */
 					bias-pull-up;
 					drive-push-pull;
-					slew-rate = <3>;
+					slew-rate = <1>;
 				};
 			};
 
···
 						 <STM32_PINMUX('G', 7, AF11)>; /* QSPI_BK2_IO3 */
 					bias-disable;
 					drive-push-pull;
-					slew-rate = <3>;
+					slew-rate = <1>;
 				};
 				pins2 {
 					pinmux = <STM32_PINMUX('C', 0, AF10)>; /* QSPI_BK2_NCS */
 					bias-pull-up;
 					drive-push-pull;
-					slew-rate = <3>;
+					slew-rate = <1>;
 				};
 			};
 

arch/arm/boot/dts/sun7i-a20.dtsi

···
 			compatible = "allwinner,sun7i-a20-csi0";
 			reg = <0x01c09000 0x1000>;
 			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ccu CLK_AHB_CSI0>, <&ccu CLK_CSI0>,
-				 <&ccu CLK_CSI_SCLK>, <&ccu CLK_DRAM_CSI0>;
-			clock-names = "bus", "mod", "isp", "ram";
+			clocks = <&ccu CLK_AHB_CSI0>, <&ccu CLK_CSI_SCLK>, <&ccu CLK_DRAM_CSI0>;
+			clock-names = "bus", "isp", "ram";
 			resets = <&ccu RST_CSI0>;
 			status = "disabled";
 		};

arch/arm/boot/dts/vf610-zii-scu4-aib.dts

···
 		#address-cells = <1>;
 		#size-cells = <0>;
 		reg = <0x70>;
+		i2c-mux-idle-disconnect;
 
 		sff0_i2c: i2c@1 {
 			#address-cells = <1>;
···
 		reg = <0x71>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
 
 		sff5_i2c: i2c@1 {
 			#address-cells = <1>;

arch/arm/configs/davinci_all_defconfig

···
 CONFIG_FIRMWARE_EDID=y
 CONFIG_FB_DA8XX=y
 CONFIG_BACKLIGHT_PWM=m
+CONFIG_BACKLIGHT_GPIO=m
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_LOGO=y
 CONFIG_SOUND=m

arch/arm/configs/imx_v6_v7_defconfig

···
 CONFIG_VIDEO_OV5645=m
 CONFIG_IMX_IPUV3_CORE=y
 CONFIG_DRM=y
+CONFIG_DRM_MSM=y
 CONFIG_DRM_PANEL_LVDS=y
 CONFIG_DRM_PANEL_SIMPLE=y
 CONFIG_DRM_PANEL_SEIKO_43WVF1G=y

arch/arm/configs/omap2plus_defconfig

···
 CONFIG_DRM_OMAP_CONNECTOR_ANALOG_TV=m
 CONFIG_DRM_OMAP_PANEL_DPI=m
 CONFIG_DRM_OMAP_PANEL_DSI_CM=m
-CONFIG_DRM_OMAP_PANEL_SONY_ACX565AKM=m
-CONFIG_DRM_OMAP_PANEL_LGPHILIPS_LB035Q02=m
-CONFIG_DRM_OMAP_PANEL_SHARP_LS037V7DW01=m
-CONFIG_DRM_OMAP_PANEL_TPO_TD028TTEC1=m
-CONFIG_DRM_OMAP_PANEL_TPO_TD043MTEA1=m
-CONFIG_DRM_OMAP_PANEL_NEC_NL8048HL11=m
 CONFIG_DRM_TILCDC=m
 CONFIG_DRM_PANEL_SIMPLE=m
 CONFIG_DRM_TI_TFP410=m
+CONFIG_DRM_PANEL_LG_LB035Q02=m
+CONFIG_DRM_PANEL_NEC_NL8048HL11=m
+CONFIG_DRM_PANEL_SHARP_LS037V7DW01=m
+CONFIG_DRM_PANEL_SONY_ACX565AKM=m
+CONFIG_DRM_PANEL_TPO_TD028TTEC1=m
+CONFIG_DRM_PANEL_TPO_TD043MTEA1=m
 CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
 CONFIG_FB_MODE_HELPERS=y

arch/arm/mach-davinci/dm365.c

···
 };
 
 static const struct dma_slave_map dm365_edma_map[] = {
-	{ "davinci-mcbsp.0", "tx", EDMA_FILTER_PARAM(0, 2) },
-	{ "davinci-mcbsp.0", "rx", EDMA_FILTER_PARAM(0, 3) },
+	{ "davinci-mcbsp", "tx", EDMA_FILTER_PARAM(0, 2) },
+	{ "davinci-mcbsp", "rx", EDMA_FILTER_PARAM(0, 3) },
 	{ "davinci_voicecodec", "tx", EDMA_FILTER_PARAM(0, 2) },
 	{ "davinci_voicecodec", "rx", EDMA_FILTER_PARAM(0, 3) },
 	{ "spi_davinci.2", "tx", EDMA_FILTER_PARAM(0, 10) },

arch/arm/mach-omap2/pdata-quirks.c

···
 	.reset_name = "mmu",
 	.assert_reset = omap_device_assert_hardreset,
 	.deassert_reset = omap_device_deassert_hardreset,
+	.device_enable = omap_device_enable,
+	.device_idle = omap_device_idle,
+};
+
+static struct iommu_platform_data omap3_iommu_isp_pdata = {
+	.device_enable = omap_device_enable,
+	.device_idle = omap_device_idle,
 };
 
 static int omap3_sbc_t3730_twl_callback(struct device *dev,
···
 	.reset_name = "mmu_cache",
 	.assert_reset = omap_device_assert_hardreset,
 	.deassert_reset = omap_device_deassert_hardreset,
+	.device_enable = omap_device_enable,
+	.device_idle = omap_device_idle,
 };
 #endif
 
···
 #ifdef CONFIG_ARCH_OMAP3
 	OF_DEV_AUXDATA("ti,omap2-iommu", 0x5d000000, "5d000000.mmu",
 		       &omap3_iommu_pdata),
+	OF_DEV_AUXDATA("ti,omap2-iommu", 0x480bd400, "480bd400.mmu",
+		       &omap3_iommu_isp_pdata),
 	OF_DEV_AUXDATA("ti,omap3-smartreflex-core", 0x480cb000,
 		       "480cb000.smartreflex", &omap_sr_pdata[OMAP_SR_CORE]),
 	OF_DEV_AUXDATA("ti,omap3-smartreflex-mpu-iva", 0x480c9000,

arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts

···
 		reg = <1>;
 	};
 };
+
+&reg_dc1sw {
+	/*
+	 * Ethernet PHY needs 30ms to properly power up and some more
+	 * to initialize. 100ms should be plenty of time to finish
+	 * whole process.
+	 */
+	regulator-enable-ramp-delay = <100000>;
+};

arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts

···
 };
 
 &reg_dc1sw {
+	/*
+	 * Ethernet PHY needs 30ms to properly power up and some more
+	 * to initialize. 100ms should be plenty of time to finish
+	 * whole process.
+	 */
+	regulator-enable-ramp-delay = <100000>;
 	regulator-name = "vcc-phy";
 };
 

arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi

···
 		clock-output-names = "ext-osc32k";
 	};
 
-	pmu {
-		compatible = "arm,cortex-a53-pmu";
-		interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
-	};
-
 	psci {
 		compatible = "arm,psci-0.2";
 		method = "smc";

arch/arm64/boot/dts/broadcom/stingray/stingray-pinctrl.dtsi

···
 
 		pinmux: pinmux@14029c {
 			compatible = "pinctrl-single";
-			reg = <0x0014029c 0x250>;
+			reg = <0x0014029c 0x26c>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			pinctrl-single,register-width = <32>;
 			pinctrl-single,function-mask = <0xf>;
 			pinctrl-single,gpio-range = <
-				&range 0 154 MODE_GPIO
+				&range 0  91 MODE_GPIO
+				&range 95 60 MODE_GPIO
 				>;
 			range: gpio-range {
 				#pinctrl-single,gpio-range-cells = <3>;

arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi

···
 					<&pinmux 108 16 27>,
 					<&pinmux 135 77 6>,
 					<&pinmux 141 67 4>,
-					<&pinmux 145 149 6>,
-					<&pinmux 151 91 4>;
+					<&pinmux 145 149 6>;
 		};
 
 		i2c1: i2c@e0000 {

arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi

···
 			i-cache-line-size = <64>;
 			i-cache-sets = <192>;
 			next-level-cache = <&cluster0_l2>;
-			cpu-idle-states = <&cpu_pw20>;
+			cpu-idle-states = <&cpu_pw15>;
 		};
 
 		cpu@1 {
···
 			i-cache-line-size = <64>;
 			i-cache-sets = <192>;
 			next-level-cache = <&cluster0_l2>;
-			cpu-idle-states = <&cpu_pw20>;
+			cpu-idle-states = <&cpu_pw15>;
 		};
 
 		cpu@100 {
···
 			i-cache-line-size = <64>;
 			i-cache-sets = <192>;
 			next-level-cache = <&cluster1_l2>;
-			cpu-idle-states = <&cpu_pw20>;
+			cpu-idle-states = <&cpu_pw15>;
 		};
 
 		cpu@101 {
···
 			i-cache-line-size = <64>;
 			i-cache-sets = <192>;
 			next-level-cache = <&cluster1_l2>;
-			cpu-idle-states = <&cpu_pw20>;
+			cpu-idle-states = <&cpu_pw15>;
 		};
 
 		cpu@200 {
···
 			i-cache-line-size = <64>;
 			i-cache-sets = <192>;
 			next-level-cache = <&cluster2_l2>;
-			cpu-idle-states = <&cpu_pw20>;
+			cpu-idle-states = <&cpu_pw15>;
 		};
 
 		cpu@201 {
···
 			i-cache-line-size = <64>;
 			i-cache-sets = <192>;
 			next-level-cache = <&cluster2_l2>;
-			cpu-idle-states = <&cpu_pw20>;
+			cpu-idle-states = <&cpu_pw15>;
 		};
 
 		cpu@300 {
···
 			i-cache-line-size = <64>;
 			i-cache-sets = <192>;
 			next-level-cache = <&cluster3_l2>;
-			cpu-idle-states = <&cpu_pw20>;
+			cpu-idle-states = <&cpu_pw15>;
 		};
 
 		cpu@301 {
···
 			i-cache-line-size = <64>;
 			i-cache-sets = <192>;
 			next-level-cache = <&cluster3_l2>;
-			cpu-idle-states = <&cpu_pw20>;
+			cpu-idle-states = <&cpu_pw15>;
 		};
 
 		cpu@400 {
···
 			i-cache-line-size = <64>;
 			i-cache-sets = <192>;
 			next-level-cache = <&cluster4_l2>;
-			cpu-idle-states = <&cpu_pw20>;
+			cpu-idle-states = <&cpu_pw15>;
 		};
 
 		cpu@401 {
···
 			i-cache-line-size = <64>;
 			i-cache-sets = <192>;
 			next-level-cache = <&cluster4_l2>;
-			cpu-idle-states = <&cpu_pw20>;
+			cpu-idle-states = <&cpu_pw15>;
 		};
 
 		cpu@500 {
···
 			i-cache-line-size = <64>;
 			i-cache-sets = <192>;
 			next-level-cache = <&cluster5_l2>;
-			cpu-idle-states = <&cpu_pw20>;
+			cpu-idle-states = <&cpu_pw15>;
 		};
 
 		cpu@501 {
···
 			i-cache-line-size = <64>;
 			i-cache-sets = <192>;
 			next-level-cache = <&cluster5_l2>;
-			cpu-idle-states = <&cpu_pw20>;
+			cpu-idle-states = <&cpu_pw15>;
 		};
 
 		cpu@600 {
···
 			i-cache-line-size = <64>;
 			i-cache-sets = <192>;
 			next-level-cache = <&cluster6_l2>;
-			cpu-idle-states = <&cpu_pw20>;
+			cpu-idle-states = <&cpu_pw15>;
 		};
 
 		cpu@601 {
···
 			i-cache-line-size = <64>;
 			i-cache-sets = <192>;
 			next-level-cache = <&cluster6_l2>;
-			cpu-idle-states = <&cpu_pw20>;
+			cpu-idle-states = <&cpu_pw15>;
 		};
 
 		cpu@700 {
···
 			i-cache-line-size = <64>;
 			i-cache-sets = <192>;
 			next-level-cache = <&cluster7_l2>;
-			cpu-idle-states = <&cpu_pw20>;
+			cpu-idle-states = <&cpu_pw15>;
 		};
 
 		cpu@701 {
···
 			i-cache-line-size = <64>;
 			i-cache-sets = <192>;
 			next-level-cache = <&cluster7_l2>;
-			cpu-idle-states = <&cpu_pw20>;
+			cpu-idle-states = <&cpu_pw15>;
 		};
 
 		cluster0_l2: l2-cache0 {
···
 			cache-level = <2>;
 		};
 
-		cpu_pw20: cpu-pw20 {
+		cpu_pw15: cpu-pw15 {
 			compatible = "arm,idle-state";
-			idle-state-name = "PW20";
+			idle-state-name = "PW15";
 			arm,psci-suspend-param = <0x0>;
 			entry-latency-us = <2000>;
 			exit-latency-us = <2000>;

arch/arm64/boot/dts/freescale/imx8mm.dtsi

···
 				compatible = "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc";
 				reg = <0x30b40000 0x10000>;
 				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX8MM_CLK_DUMMY>,
+				clocks = <&clk IMX8MM_CLK_IPG_ROOT>,
 					 <&clk IMX8MM_CLK_NAND_USDHC_BUS>,
 					 <&clk IMX8MM_CLK_USDHC1_ROOT>;
 				clock-names = "ipg", "ahb", "per";
···
 				compatible = "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc";
 				reg = <0x30b50000 0x10000>;
 				interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX8MM_CLK_DUMMY>,
+				clocks = <&clk IMX8MM_CLK_IPG_ROOT>,
 					 <&clk IMX8MM_CLK_NAND_USDHC_BUS>,
 					 <&clk IMX8MM_CLK_USDHC2_ROOT>;
 				clock-names = "ipg", "ahb", "per";
···
 				compatible = "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc";
 				reg = <0x30b60000 0x10000>;
 				interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX8MM_CLK_DUMMY>,
+				clocks = <&clk IMX8MM_CLK_IPG_ROOT>,
 					 <&clk IMX8MM_CLK_NAND_USDHC_BUS>,
 					 <&clk IMX8MM_CLK_USDHC3_ROOT>;
 				clock-names = "ipg", "ahb", "per";

arch/arm64/boot/dts/freescale/imx8mn.dtsi

···
 				compatible = "fsl,imx8mn-usdhc", "fsl,imx7d-usdhc";
 				reg = <0x30b40000 0x10000>;
 				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX8MN_CLK_DUMMY>,
+				clocks = <&clk IMX8MN_CLK_IPG_ROOT>,
 					 <&clk IMX8MN_CLK_NAND_USDHC_BUS>,
 					 <&clk IMX8MN_CLK_USDHC1_ROOT>;
 				clock-names = "ipg", "ahb", "per";
···
 				compatible = "fsl,imx8mn-usdhc", "fsl,imx7d-usdhc";
 				reg = <0x30b50000 0x10000>;
 				interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX8MN_CLK_DUMMY>,
+				clocks = <&clk IMX8MN_CLK_IPG_ROOT>,
 					 <&clk IMX8MN_CLK_NAND_USDHC_BUS>,
 					 <&clk IMX8MN_CLK_USDHC2_ROOT>;
 				clock-names = "ipg", "ahb", "per";
···
 				compatible = "fsl,imx8mn-usdhc", "fsl,imx7d-usdhc";
 				reg = <0x30b60000 0x10000>;
 				interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX8MN_CLK_DUMMY>,
+				clocks = <&clk IMX8MN_CLK_IPG_ROOT>,
 					 <&clk IMX8MN_CLK_NAND_USDHC_BUS>,
 					 <&clk IMX8MN_CLK_USDHC3_ROOT>;
 				clock-names = "ipg", "ahb", "per";

arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi

···
 		regulator-min-microvolt = <900000>;
 		regulator-max-microvolt = <1000000>;
 		gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
-		states = <1000000 0x0
-		           900000 0x1>;
+		states = <1000000 0x1
+		           900000 0x0>;
 		regulator-always-on;
 	};
 };

arch/arm64/boot/dts/freescale/imx8mq.dtsi

···
 				             "fsl,imx7d-usdhc";
 				reg = <0x30b40000 0x10000>;
 				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX8MQ_CLK_DUMMY>,
+				clocks = <&clk IMX8MQ_CLK_IPG_ROOT>,
 				         <&clk IMX8MQ_CLK_NAND_USDHC_BUS>,
 				         <&clk IMX8MQ_CLK_USDHC1_ROOT>;
 				clock-names = "ipg", "ahb", "per";
···
 				             "fsl,imx7d-usdhc";
 				reg = <0x30b50000 0x10000>;
 				interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX8MQ_CLK_DUMMY>,
+				clocks = <&clk IMX8MQ_CLK_IPG_ROOT>,
 				         <&clk IMX8MQ_CLK_NAND_USDHC_BUS>,
 				         <&clk IMX8MQ_CLK_USDHC2_ROOT>;
 				clock-names = "ipg", "ahb", "per";

arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts

···
 		gpio = <&gpiosb 0 GPIO_ACTIVE_HIGH>;
 	};
 
-	usb3_phy: usb3-phy {
-		compatible = "usb-nop-xceiv";
-		vcc-supply = <&exp_usb3_vbus>;
-	};
-
 	vsdc_reg: vsdc-reg {
 		compatible = "regulator-gpio";
 		regulator-name = "vsdc";
···
 	status = "okay";
 };
 
+&comphy2 {
+	connector {
+		compatible = "usb-a-connector";
+		phy-supply = <&exp_usb3_vbus>;
+	};
+};
+
 &usb3 {
 	status = "okay";
 	phys = <&comphy2 0>;
-	usb-phy = <&usb3_phy>;
 };
 
 &mdio {

arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts

···
 		power-supply = <&pp3300_disp>;
 
 		panel-timing {
-			clock-frequency = <266604720>;
+			clock-frequency = <266666667>;
 			hactive = <2400>;
 			hfront-porch = <48>;
 			hback-porch = <84>;

arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts

···
 	status = "okay";
 
 	u2phy0_host: host-port {
-		phy-supply = <&vcc5v0_host>;
+		phy-supply = <&vcc5v0_typec>;
 		status = "okay";
 	};
 
···
 
 &usbdrd_dwc3_0 {
 	status = "okay";
-	dr_mode = "otg";
+	dr_mode = "host";
 };
 
 &usbdrd3_1 {

arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts

···
 		regulator-always-on;
 		regulator-boot-on;
 		regulator-min-microvolt = <800000>;
-		regulator-max-microvolt = <1400000>;
+		regulator-max-microvolt = <1700000>;
 		vin-supply = <&vcc5v0_sys>;
 	};
 };
···
 	rk808: pmic@1b {
 		compatible = "rockchip,rk808";
 		reg = <0x1b>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
 		#clock-cells = <1>;
 		clock-output-names = "xin32k", "rk808-clkout2";
 		pinctrl-names = "default";
···
 
 	pmic {
 		pmic_int_l: pmic-int-l {
-			rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
+			rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 
 		vsel1_gpio: vsel1-gpio {
···
 
 &sdmmc {
 	bus-width = <4>;
-	cap-mmc-highspeed;
 	cap-sd-highspeed;
 	cd-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
 	disable-wp;
···
 
 &sdhci {
 	bus-width = <8>;
-	mmc-hs400-1_8v;
-	mmc-hs400-enhanced-strobe;
+	mmc-hs200-1_8v;
 	non-removable;
 	status = "okay";
 };

drivers/bus/ti-sysc.c

···
  * @clk_disable_quirk: module specific clock disable quirk
  * @reset_done_quirk: module specific reset done quirk
  * @module_enable_quirk: module specific enable quirk
+ * @module_disable_quirk: module specific disable quirk
  */
 struct sysc {
 	struct device *dev;
···
 	void (*clk_disable_quirk)(struct sysc *sysc);
 	void (*reset_done_quirk)(struct sysc *sysc);
 	void (*module_enable_quirk)(struct sysc *sysc);
+	void (*module_disable_quirk)(struct sysc *sysc);
 };
 
 static void sysc_parse_dts_quirks(struct sysc *ddata, struct device_node *np,
···
 	if (ddata->offsets[SYSC_SYSCONFIG] == -ENODEV)
 		return 0;
 
+	if (ddata->module_disable_quirk)
+		ddata->module_disable_quirk(ddata);
+
 	regbits = ddata->cap->regbits;
 	reg = sysc_read(ddata, ddata->offsets[SYSC_SYSCONFIG]);
 
···
 		   SYSC_MODULE_QUIRK_SGX),
 	SYSC_QUIRK("wdt", 0, 0, 0x10, 0x14, 0x502a0500, 0xfffff0f0,
 		   SYSC_MODULE_QUIRK_WDT),
+	/* Watchdog on am3 and am4 */
+	SYSC_QUIRK("wdt", 0x44e35000, 0, 0x10, 0x14, 0x502a0500, 0xfffff0f0,
+		   SYSC_MODULE_QUIRK_WDT | SYSC_QUIRK_SWSUP_SIDLE),
 
 #ifdef DEBUG
 	SYSC_QUIRK("adc", 0, 0, 0x10, -1, 0x47300001, 0xffffffff, 0),
···
 				   !(val & 0x10), 100,
 				   MAX_MODULE_SOFTRESET_WAIT);
 	if (error)
-		dev_warn(ddata->dev, "wdt disable spr failed\n");
+		dev_warn(ddata->dev, "wdt disable step1 failed\n");
 
-	sysc_write(ddata, wps, 0x5555);
+	sysc_write(ddata, spr, 0x5555);
 	error = readl_poll_timeout(ddata->module_va + wps, val,
 				   !(val & 0x10), 100,
 				   MAX_MODULE_SOFTRESET_WAIT);
 	if (error)
-		dev_warn(ddata->dev, "wdt disable wps failed\n");
+		dev_warn(ddata->dev, "wdt disable step2 failed\n");
 }
 
 static void sysc_init_module_quirks(struct sysc *ddata)
···
 	if (ddata->cfg.quirks & SYSC_MODULE_QUIRK_SGX)
 		ddata->module_enable_quirk = sysc_module_enable_quirk_sgx;
 
-	if (ddata->cfg.quirks & SYSC_MODULE_QUIRK_WDT)
+	if (ddata->cfg.quirks & SYSC_MODULE_QUIRK_WDT) {
 		ddata->reset_done_quirk = sysc_reset_done_quirk_wdt;
+		ddata->module_disable_quirk = sysc_reset_done_quirk_wdt;
+	}
 }
 
 static int sysc_clockdomain_init(struct sysc *ddata)

drivers/soc/imx/soc-imx-scu.c

···
 	hdr->func = IMX_SC_MISC_FUNC_UNIQUE_ID;
 	hdr->size = 1;
 
-	ret = imx_scu_call_rpc(soc_ipc_handle, &msg, false);
+	ret = imx_scu_call_rpc(soc_ipc_handle, &msg, true);
 	if (ret) {
 		pr_err("%s: get soc uid failed, ret %d\n", __func__, ret);
 		return ret;