dt-bindings: interrupt-controller: Add Renesas RZ/A1 Interrupt Controller

Add DT bindings for the Renesas RZ/A1 Interrupt Controller.

Signed-off-by: Geert Uytterhoeven <[e-mail]>
Reviewed-by: Simon Horman <[e-mail]>
Reviewed-by: Rob Herring <[e-mail]>
Signed-off-by: Marc Zyngier <[e-mail]>

Documentation/devicetree/bindings/interrupt-controller/renesas,rza1-irqc.txt

···
+DT bindings for the Renesas RZ/A1 Interrupt Controller
+
+The RZ/A1 Interrupt Controller is a front-end for the GIC found on Renesas
+RZ/A1 and RZ/A2 SoCs:
+  - IRQ sense select for 8 external interrupts, 1:1-mapped to 8 GIC SPI
+    interrupts,
+  - NMI edge select.
+
+Required properties:
+  - compatible: Must be "renesas,<soctype>-irqc", and "renesas,rza1-irqc" as
+		fallback.
+		Examples with soctypes are:
+		  - "renesas,r7s72100-irqc" (RZ/A1H)
+		  - "renesas,r7s9210-irqc" (RZ/A2M)
+  - #interrupt-cells: Must be 2 (an interrupt index and flags, as defined
+				 in interrupts.txt in this directory)
+  - #address-cells: Must be zero
+  - interrupt-controller: Marks the device as an interrupt controller
+  - reg: Base address and length of the memory resource used by the interrupt
+         controller
+  - interrupt-map: Specifies the mapping from external interrupts to GIC
+		   interrupts
+  - interrupt-map-mask: Must be <7 0>
+
+Example:
+
+	irqc: interrupt-controller@fcfef800 {
+		compatible = "renesas,r7s72100-irqc", "renesas,rza1-irqc";
+		#interrupt-cells = <2>;
+		#address-cells = <0>;
+		interrupt-controller;
+		reg = <0xfcfef800 0x6>;
+		interrupt-map =
+			<0 0 &gic GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+			<1 0 &gic GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+			<2 0 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+			<3 0 &gic GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+			<4 0 &gic GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+			<5 0 &gic GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+			<6 0 &gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+			<7 0 &gic GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-map-mask = <7 0>;
+	};