arm64: zynqmp: Add phase tags marking

bootph-all as phase tag was added to dt-schema
(dtschema/schemas/bootph.yaml) to cover U-Boot challenges with DT.
That's why add it also to Linux to be aligned with bootloader requirement.

Signed-off-by: Michal Simek <[e-mail]>
Link: https://lore.kernel.org/r/48b5[e-mail]

arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi

···
 #include <dt-bindings/clock/xlnx-zynqmp-clk.h>
 / {
 	pss_ref_clk: pss_ref_clk {
+		bootph-all;
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <33333333>;
 	};
 
 	video_clk: video_clk {
+		bootph-all;
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <27000000>;
 	};
 
 	pss_alt_ref_clk: pss_alt_ref_clk {
+		bootph-all;
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <0>;
 	};
 
 	gt_crx_ref_clk: gt_crx_ref_clk {
+		bootph-all;
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <108000000>;
 	};
 
 	aux_ref_clk: aux_ref_clk {
+		bootph-all;
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <27000000>;
···
 
 &zynqmp_firmware {
 	zynqmp_clk: clock-controller {
+		bootph-all;
 		#clock-cells = <1>;
 		compatible = "xlnx,zynqmp-clk";
 		clocks = <&pss_ref_clk>, <&video_clk>, <&pss_alt_ref_clk>,

arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts

···
 
 &i2c1 {
 	status = "okay";
+	bootph-all;
 	clock-frequency = <400000>;
 	scl-gpios = <&gpio 24 GPIO_ACTIVE_HIGH>;
 	sda-gpios = <&gpio 25 GPIO_ACTIVE_HIGH>;
 
 	eeprom: eeprom@50 { /* u46 - also at address 0x58 */
+		bootph-all;
 		compatible = "st,24c64", "atmel,24c64"; /* st m24c64 */
 		reg = <0x50>;
 		/* WP pin EE_WP_EN connected to slg7x644092@68 */
 	};
 
 	eeprom_cc: eeprom@51 { /* required by spec - also at address 0x59 */
+		bootph-all;
 		compatible = "st,24c64", "atmel,24c64"; /* st m24c64 */
 		reg = <0x51>;
 	};

arch/arm64/boot/dts/xilinx/zynqmp.dtsi

···
 	};
 
 	zynqmp_ipi: zynqmp_ipi {
+		bootph-all;
 		compatible = "xlnx,zynqmp-ipi-mailbox";
 		interrupt-parent = <&gic>;
 		interrupts = <0 35 4>;
···
 		ranges;
 
 		ipi_mailbox_pmu1: mailbox@ff9905c0 {
+			bootph-all;
 			reg = <0x0 0xff9905c0 0x0 0x20>,
 			      <0x0 0xff9905e0 0x0 0x20>,
 			      <0x0 0xff990e80 0x0 0x20>,
···
 	dcc: dcc {
 		compatible = "arm,dcc";
 		status = "disabled";
+		bootph-all;
 	};
 
 	pmu {
···
 			compatible = "xlnx,zynqmp-firmware";
 			#power-domain-cells = <1>;
 			method = "smc";
+			bootph-all;
 
 			zynqmp_power: zynqmp-power {
+				bootph-all;
 				compatible = "xlnx,zynqmp-power";
 				interrupt-parent = <&gic>;
 				interrupts = <0 35 4>;
···
 
 	amba: axi {
 		compatible = "simple-bus";
+		bootph-all;
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges;
···
 		};
 
 		qspi: spi@ff0f0000 {
+			bootph-all;
 			compatible = "xlnx,zynqmp-qspi-1.0";
 			status = "disabled";
 			clock-names = "ref_clk", "pclk";
···
 		};
 
 		sdhci0: mmc@ff160000 {
+			bootph-all;
 			compatible = "xlnx,zynqmp-8.9a", "arasan,sdhci-8.9a";
 			status = "disabled";
 			interrupt-parent = <&gic>;
···
 		};
 
 		sdhci1: mmc@ff170000 {
+			bootph-all;
 			compatible = "xlnx,zynqmp-8.9a", "arasan,sdhci-8.9a";
 			status = "disabled";
 			interrupt-parent = <&gic>;
···
 		};
 
 		uart0: serial@ff000000 {
+			bootph-all;
 			compatible = "xlnx,zynqmp-uart", "cdns,uart-r1p12";
 			status = "disabled";
 			interrupt-parent = <&gic>;
···
 		};
 
 		uart1: serial@ff010000 {
+			bootph-all;
 			compatible = "xlnx,zynqmp-uart", "cdns,uart-r1p12";
 			status = "disabled";
 			interrupt-parent = <&gic>;
···
 		};
 
 		zynqmp_dpsub: display@fd4a0000 {
+			bootph-all;
 			compatible = "xlnx,zynqmp-dpsub-1.7";
 			status = "disabled";
 			reg = <0x0 0xfd4a0000 0x0 0x1000>,