Merge tag 'at91-dt-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/dt

AT91 DT for v5.20

It contains:
- compilation warning fixes for SAMA5D2
- updates for all AT91 device tree to use generic name for reset
controller
- reset controller node for SAMA7G5
- MCAN1 and UDPHS nodes for LAN966 SoCs
- Flexcom3 bindings were updated for lan966x-pcb8291.dts board to cope
with reality

* tag 'at91-dt-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: dts: lan966x: Add UDPHS support
dt-bindings: usb: atmel: Add Microchip LAN9662 compatible string
ARM: dts: lan966x: Cleanup flexcom3 usart pinctrl settings.
ARM: dts: lan966x: Add mcan1 node.
ARM: dts: at91: sama7g5: add reset-controller node
ARM: dts: at91: use generic name for reset controller
ARM: dts: at91: sama5d2: fix compilation warning
ARM: dts: at91: sama5d2: fix compilation warning

Link: https://lore.kernel.org/r/[e-mail]
Signed-off-by: Arnd Bergmann <[e-mail]>

Documentation/devicetree/bindings/usb/atmel-usb.txt

···
 	       "atmel,at91sam9g45-udc"
 	       "atmel,sama5d3-udc"
 	       "microchip,sam9x60-udc"
+	       "microchip,lan9662-udc"
+	       For "microchip,lan9662-udc" the fallback "atmel,sama5d3-udc"
+	       is required.
  - reg: Address and length of the register set for the device
  - interrupts: Should contain usba interrupt
  - clocks: Should reference the peripheral and host clocks

arch/arm/boot/dts/at91-sama5d27_som1.dtsi

···
 			macb0: ethernet@f8008000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_macb0_default>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 				phy-mode = "rmii";
 
 				ethernet-phy@7 {

arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi

···
 &macb0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_macb0_default>;
+	#address-cells = <1>;
+	#size-cells = <0>;
 	phy-mode = "rmii";
 
 	ethernet-phy@0 {

arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts

···
 			macb0: ethernet@f8008000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_macb0_default &pinctrl_macb0_phy_irq>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 				phy-mode = "rmii";
 				status = "okay";
 

arch/arm/boot/dts/at91-sama5d2_xplained.dts

···
 			macb0: ethernet@f8008000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_macb0_default &pinctrl_macb0_phy_irq>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 				phy-mode = "rmii";
 				status = "okay";
 

arch/arm/boot/dts/at91sam9260.dtsi

···
 				clock-names = "slow_xtal", "main_xtal";
 			};
 
-			rstc@fffffd00 {
+			reset-controller@fffffd00 {
 				compatible = "atmel,at91sam9260-rstc";
 				reg = <0xfffffd00 0x10>;
 				clocks = <&pmc PMC_TYPE_CORE PMC_SLOW>;

arch/arm/boot/dts/at91sam9261.dtsi

···
 				clock-names = "slow_xtal", "main_xtal";
 			};
 
-			rstc@fffffd00 {
+			reset-controller@fffffd00 {
 				compatible = "atmel,at91sam9260-rstc";
 				reg = <0xfffffd00 0x10>;
 				clocks = <&slow_xtal>;

arch/arm/boot/dts/at91sam9263.dtsi

···
 				clock-names = "t0_clk", "slow_clk";
 			};
 
-			rstc@fffffd00 {
+			reset-controller@fffffd00 {
 				compatible = "atmel,at91sam9260-rstc";
 				reg = <0xfffffd00 0x10>;
 				clocks = <&slow_xtal>;

arch/arm/boot/dts/at91sam9g45.dtsi

···
 				clock-names = "slow_clk", "main_xtal";
 			};
 
-			rstc@fffffd00 {
+			reset-controller@fffffd00 {
 				compatible = "atmel,at91sam9g45-rstc";
 				reg = <0xfffffd00 0x10>;
 				clocks = <&clk32k>;

arch/arm/boot/dts/at91sam9n12.dtsi

···
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 			};
 
-			rstc@fffffe00 {
+			reset-controller@fffffe00 {
 				compatible = "atmel,at91sam9g45-rstc";
 				reg = <0xfffffe00 0x10>;
 				clocks = <&clk32k>;

arch/arm/boot/dts/at91sam9rl.dtsi

···
 				clock-names = "slow_clk", "main_xtal";
 			};
 
-			rstc@fffffd00 {
+			reset-controller@fffffd00 {
 				compatible = "atmel,at91sam9260-rstc";
 				reg = <0xfffffd00 0x10>;
 				clocks = <&clk32k>;

arch/arm/boot/dts/at91sam9x5.dtsi

···
 				clock-names = "slow_clk", "main_xtal";
 			};
 
-			reset_controller: rstc@fffffe00 {
+			reset_controller: reset-controller@fffffe00 {
 				compatible = "atmel,at91sam9g45-rstc";
 				reg = <0xfffffe00 0x10>;
 				clocks = <&clk32k>;

arch/arm/boot/dts/lan966x-pcb8291.dts

···
 };
 
 &gpio {
-	fc_shrd7_pins: fc_shrd7-pins {
-		pins = "GPIO_49";
-		function = "fc_shrd7";
-	};
-
-	fc_shrd8_pins: fc_shrd8-pins {
-		pins = "GPIO_54";
-		function = "fc_shrd8";
-	};
-
-	fc3_b_pins: fcb3-spi-pins {
-		/* SCK, RXD, TXD */
-		pins = "GPIO_51", "GPIO_52", "GPIO_53";
+	fc3_b_pins: fc3-b-pins {
+		/* RX, TX */
+		pins = "GPIO_52", "GPIO_53";
 		function = "fc3_b";
 	};
 
···
 	status = "okay";
 
 	usart3: serial@200 {
-		pinctrl-0 = <&fc3_b_pins>, <&fc_shrd7_pins>, <&fc_shrd8_pins>;
+		pinctrl-0 = <&fc3_b_pins>;
 		pinctrl-names = "default";
 		status = "okay";
 	};

arch/arm/boot/dts/lan966x.dtsi

···
 		#size-cells = <1>;
 		ranges;
 
+		udc: usb@200000 {
+			compatible = "microchip,lan9662-udc",
+				     "atmel,sama5d3-udc";
+			reg = <0x00200000 0x80000>,
+			      <0xe0808000 0x400>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks GCK_GATE_UDPHS>, <&nic_clk>;
+			clock-names = "pclk", "hclk";
+			status = "disabled";
+		};
+
 		switch: switch@e0000000 {
 			compatible = "microchip,lan966x-switch";
 			reg = <0xe0000000 0x0100000>,
···
 			assigned-clocks = <&clks GCK_ID_MCAN0>;
 			assigned-clock-rates = <40000000>;
 			bosch,mram-cfg = <0x0 0 0 64 0 0 32 32>;
+			status = "disabled";
+		};
+
+		can1: can@e0820000 {
+			compatible = "bosch,m_can";
+			reg = <0xe0820000 0xfc>, <0x00100000 0x8000>;
+			reg-names = "m_can", "message_ram";
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "int0", "int1";
+			clocks = <&clks GCK_ID_MCAN1>, <&clks GCK_ID_MCAN1>;
+			clock-names = "hclk", "cclk";
+			assigned-clocks = <&clks GCK_ID_MCAN1>;
+			assigned-clock-rates = <40000000>;
+			bosch,mram-cfg = <0x4000 0 0 64 0 0 32 32>;
 			status = "disabled";
 		};
 

arch/arm/boot/dts/sam9x60.dtsi

···
 				clock-names = "td_slck", "md_slck", "main_xtal";
 			};
 
-			reset_controller: rstc@fffffe00 {
+			reset_controller: reset-controller@fffffe00 {
 				compatible = "microchip,sam9x60-rstc";
 				reg = <0xfffffe00 0x10>;
 				clocks = <&clk32k 0>;

arch/arm/boot/dts/sama5d2.dtsi

···
 		ranges = <0 0x00200000 0x20000>;
 	};
 
+	resistive_touch: resistive-touch {
+		compatible = "resistive-adc-touch";
+		io-channels = <&adc AT91_SAMA5D2_ADC_X_CHANNEL>,
+			      <&adc AT91_SAMA5D2_ADC_Y_CHANNEL>,
+			      <&adc AT91_SAMA5D2_ADC_P_CHANNEL>;
+		io-channel-names = "x", "y", "pressure";
+		touchscreen-min-pressure = <50000>;
+		status = "disabled";
+	};
+
 	ahb {
 		compatible = "simple-bus";
 		#address-cells = <1>;
···
 				interrupts = <5  IRQ_TYPE_LEVEL_HIGH 3		/* Queue 0 */
 					      66 IRQ_TYPE_LEVEL_HIGH 3          /* Queue 1 */
 					      67 IRQ_TYPE_LEVEL_HIGH 3>;        /* Queue 2 */
-				#address-cells = <1>;
-				#size-cells = <0>;
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 5>, <&pmc PMC_TYPE_PERIPHERAL 5>;
 				clock-names = "hclk", "pclk";
 				status = "disabled";
···
 				ranges = <0 0xf8044000 0x1420>;
 			};
 
-			reset_controller: rstc@f8048000 {
+			reset_controller: reset-controller@f8048000 {
 				compatible = "atmel,sama5d3-rstc";
 				reg = <0xf8048000 0x10>;
 				clocks = <&clk32k>;
···
 				atmel,startup-time-ms = <4>;
 				atmel,trigger-edge-type = <IRQ_TYPE_EDGE_RISING>;
 				#io-channel-cells = <1>;
-				status = "disabled";
-			};
-
-			resistive_touch: resistive-touch {
-				compatible = "resistive-adc-touch";
-				io-channels = <&adc AT91_SAMA5D2_ADC_X_CHANNEL>,
-					      <&adc AT91_SAMA5D2_ADC_Y_CHANNEL>,
-					      <&adc AT91_SAMA5D2_ADC_P_CHANNEL>;
-				io-channel-names = "x", "y", "pressure";
-				touchscreen-min-pressure = <50000>;
 				status = "disabled";
 			};
 

arch/arm/boot/dts/sama5d3.dtsi

···
 				clock-names = "slow_clk", "main_xtal";
 			};
 
-			reset_controller: rstc@fffffe00 {
+			reset_controller: reset-controller@fffffe00 {
 				compatible = "atmel,sama5d3-rstc", "atmel,at91sam9g45-rstc";
 				reg = <0xfffffe00 0x10>;
 				clocks = <&clk32k>;

arch/arm/boot/dts/sama5d4.dtsi

···
 				};
 			};
 
-			reset_controller: rstc@fc068600 {
+			reset_controller: reset-controller@fc068600 {
 				compatible = "atmel,sama5d3-rstc", "atmel,at91sam9g45-rstc";
 				reg = <0xfc068600 0x10>;
 				clocks = <&clk32k>;

arch/arm/boot/dts/sama7g5.dtsi

···
 			clock-names = "td_slck", "md_slck", "main_xtal";
 		};
 
+		reset_controller: reset-controller@e001d000 {
+			compatible = "microchip,sama7g5-rstc";
+			reg = <0xe001d000 0xc>, <0xe001d0e4 0x4>;
+			#reset-cells = <1>;
+			clocks = <&clk32k 0>;
+		};
+
 		shdwc: shdwc@e001d010 {
 			compatible = "microchip,sama7g5-shdwc", "syscon";
 			reg = <0xe001d010 0x10>;