scsi: qla2xxx: Fix typo in driver

Signed-off-by: Milan P Gandhi <[e-mail]>
Signed-off-by: Himanshu Madhani <[e-mail]>
Signed-off-by: Martin K. Petersen <[e-mail]>

drivers/scsi/qla2xxx/qla_attr.c

···
 	case 0x2025e:
 		if (!IS_P3P_TYPE(ha) || vha != base_vha) {
 			ql_log(ql_log_info, vha, 0x7071,
-			    "FCoE ctx reset no supported.\n");
+			    "FCoE ctx reset not supported.\n");
 			return -EPERM;
 		}
 

drivers/scsi/qla2xxx/qla_bsg.c

···
 	/* Check if operating mode is P2P */
 	if (ha->operating_mode != P2P) {
 		ql_log(ql_log_warn, vha, 0x70a4,
-		    "Host is operating mode is not P2p\n");
+		    "Host operating mode is not P2p\n");
 		rval = EXT_STATUS_INVALID_CFG;
 		goto done;
 	}

drivers/scsi/qla2xxx/qla_gs.c

···
 			if (ct_rsp->header.response !=
 			    cpu_to_be16(CT_ACCEPT_RESPONSE)) {
 				ql_dbg(ql_dbg_disc + ql_dbg_buffer, vha, 0x2077,
-				    "%s failed rejected request on port_id: %02x%02x%02x Compeltion status 0x%x, response 0x%x\n",
+				    "%s failed rejected request on port_id: %02x%02x%02x Completion status 0x%x, response 0x%x\n",
 				    routine, vha->d_id.b.domain,
 				    vha->d_id.b.area, vha->d_id.b.al_pa,
 				    comp_status, ct_rsp->header.response);

drivers/scsi/qla2xxx/qla_init.c

···
 		goto chip_diag_failed;
 
 	/* Check product ID of chip */
-	ql_dbg(ql_dbg_init, vha, 0x007d, "Checking product Id of chip.\n");
+	ql_dbg(ql_dbg_init, vha, 0x007d, "Checking product ID of chip.\n");
 
 	mb[1] = RD_MAILBOX_REG(ha, reg, 1);
 	mb[2] = RD_MAILBOX_REG(ha, reg, 2);

drivers/scsi/qla2xxx/qla_isr.c

···
 
 	case CS_DATA_OVERRUN:
 		ql_dbg(ql_dbg_user, vha, 0x70b1,
-		    "Command completed with date overrun thread_id=%d\n",
+		    "Command completed with data overrun thread_id=%d\n",
 		    thread_id);
 		rval = EXT_STATUS_DATA_OVERRUN;
 		break;
 
 	case CS_DATA_UNDERRUN:
 		ql_dbg(ql_dbg_user, vha, 0x70b2,
-		    "Command completed with date underrun thread_id=%d\n",
+		    "Command completed with data underrun thread_id=%d\n",
 		    thread_id);
 		rval = EXT_STATUS_DATA_UNDERRUN;
 		break;
···
 
 	case CS_BIDIR_RD_UNDERRUN:
 		ql_dbg(ql_dbg_user, vha, 0x70b6,
-		    "Command completed with read data data underrun "
+		    "Command completed with read data underrun "
 		    "thread_id=%d\n", thread_id);
 		rval = EXT_STATUS_DATA_UNDERRUN;
 		break;