tty: pl011: use "qdf2400_e44" as the earlycon name for QDF2400 E44

Define a new early console name for Qualcomm Datacenter Technologies
QDF2400 SOCs affected by erratum 44, instead of piggy-backing on "pl011".
Previously, to enable traditional (non-SPCR) earlycon, the documentation
said to specify "earlycon=pl011,<address>,qdf2400_e44", but the code was
broken and this didn't actually work.

So instead, the method for specifying the E44 work-around with traditional
earlycon is "earlycon=qdf2400_e44,<address>". Both methods of earlycon
are now enabled with the same function.

Fixes: e53e597fd4c4 ("tty: pl011: fix earlycon work-around for QDF2400 erratum 44")
Signed-off-by: Timur Tabi <[e-mail]>
Cc: stable <[e-mail]> # 4.11
Tested-by: Shanker Donthineni <[e-mail]>
Signed-off-by: Greg Kroah-Hartman <[e-mail]>

drivers/tty/serial/amba-pl011.c

···
 	if (!device->port.membase)
 		return -ENODEV;
 
-	/* On QDF2400 SOCs affected by Erratum 44, the "qdf2400_e44" must
-	 * also be specified, e.g. "earlycon=pl011,<address>,qdf2400_e44".
-	 */
-	if (!strcmp(device->options, "qdf2400_e44"))
-		device->con->write = qdf2400_e44_early_write;
-	else
-		device->con->write = pl011_early_write;
+	device->con->write = pl011_early_write;
 
 	return 0;
 }
 OF_EARLYCON_DECLARE(pl011, "arm,pl011", pl011_early_console_setup);
 OF_EARLYCON_DECLARE(pl011, "arm,sbsa-uart", pl011_early_console_setup);
-EARLYCON_DECLARE(qdf2400_e44, pl011_early_console_setup);
+
+/*
+ * On Qualcomm Datacenter Technologies QDF2400 SOCs affected by
+ * Erratum 44, traditional earlycon can be enabled by specifying
+ * "earlycon=qdf2400_e44,<address>".  Any options are ignored.
+ *
+ * Alternatively, you can just specify "earlycon", and the early console
+ * will be enabled with the information from the SPCR table.  In this
+ * case, the SPCR code will detect the need for the E44 work-around,
+ * and set the console name to "qdf2400_e44".
+ */
+static int __init
+qdf2400_e44_early_console_setup(struct earlycon_device *device,
+				const char *opt)
+{
+	if (!device->port.membase)
+		return -ENODEV;
+
+	device->con->write = qdf2400_e44_early_write;
+	return 0;
+}
+EARLYCON_DECLARE(qdf2400_e44, qdf2400_e44_early_console_setup);
 
 #else
 #define AMBA_CONSOLE	NULL