tjh.dev
Linux kernel mirror (for testing)
git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
kernel
os
linux
net: kdoc struct net_device flags and priv_flags
We have documentation for these flags but they're scattered
all over the place. #defines don't allow documentation to be
written easily so to help to start bringing some documentation
together use the enums kdoc practice but keep the defines to
allow userspace to be able to #ifdef them.
I've verified the same values are assigned before and after
with a simple userspace test program [0] and checksumming the
output.
[0] http://drvbp1.linux-foundation.org/~mcgrof/kdoc/netdev_flags/
mcgrof@gnat ~/tmp $ ./check-flags | sha1sum
0ec5b6b1840aa3bb9ce464e61c564820871c92c3 -
Cc: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: Ben Hutchings <ben@decadent.org.uk>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
authored by
Luis R. Rodriguez
and committed by
David S. Miller
589f5816
118ce7ab
+161
-52
+161
-52
include/uapi/linux/if.h
+161
-52
include/uapi/linux/if.h
···
27
27
#define IFALIASZ 256
28
28
#include <linux/hdlc/ioctl.h>
29
29
30
-
/* Standard interface flags (netdevice->flags). */
31
-
#define IFF_UP 0x1 /* interface is up */
32
-
#define IFF_BROADCAST 0x2 /* broadcast address valid */
33
-
#define IFF_DEBUG 0x4 /* turn on debugging */
34
-
#define IFF_LOOPBACK 0x8 /* is a loopback net */
35
-
#define IFF_POINTOPOINT 0x10 /* interface is has p-p link */
36
-
#define IFF_NOTRAILERS 0x20 /* avoid use of trailers */
37
-
#define IFF_RUNNING 0x40 /* interface RFC2863 OPER_UP */
38
-
#define IFF_NOARP 0x80 /* no ARP protocol */
39
-
#define IFF_PROMISC 0x100 /* receive all packets */
40
-
#define IFF_ALLMULTI 0x200 /* receive all multicast packets*/
30
+
/**
31
+
* enum net_device_flags - &struct net_device flags
32
+
*
33
+
* These are the &struct net_device flags, they can be set by drivers, the
34
+
* kernel and some can be triggered by userspace. Userspace can query and
35
+
* set these flags using userspace utilities but there is also a sysfs
36
+
* entry available for all dev flags which can be queried and set. These flags
37
+
* are shared for all types of net_devices. The sysfs entries are available
38
+
* via /sys/class/net/<dev>/flags. Flags which can be toggled through sysfs
39
+
* are annotated below, note that only a few flags can be toggled and some
40
+
* other flags are always always preserved from the original net_device flags
41
+
* even if you try to set them via sysfs. Flags which are always preserved
42
+
* are kept under the flag grouping @IFF_VOLATILE. Flags which are volatile
43
+
* are annotated below as such.
44
+
*
45
+
* You should have a pretty good reason to be extending these flags.
46
+
*
47
+
* @IFF_UP: interface is up. Can be toggled through sysfs.
48
+
* @IFF_BROADCAST: broadcast address valid. Volatile.
49
+
* @IFF_DEBUG: turn on debugging. Can be toggled through sysfs.
50
+
* @IFF_LOOPBACK: is a loopback net. Volatile.
51
+
* @IFF_POINTOPOINT: interface is has p-p link. Volatile.
52
+
* @IFF_NOTRAILERS: avoid use of trailers. Can be toggled through sysfs.
53
+
* Volatile.
54
+
* @IFF_RUNNING: interface RFC2863 OPER_UP. Volatile.
55
+
* @IFF_NOARP: no ARP protocol. Can be toggled through sysfs. Volatile.
56
+
* @IFF_PROMISC: receive all packets. Can be toggled through sysfs.
57
+
* @IFF_ALLMULTI: receive all multicast packets. Can be toggled through
58
+
* sysfs.
59
+
* @IFF_MASTER: master of a load balancer. Volatile.
60
+
* @IFF_SLAVE: slave of a load balancer. Volatile.
61
+
* @IFF_MULTICAST: Supports multicast. Can be toggled through sysfs.
62
+
* @IFF_PORTSEL: can set media type. Can be toggled through sysfs.
63
+
* @IFF_AUTOMEDIA: auto media select active. Can be toggled through sysfs.
64
+
* @IFF_DYNAMIC: dialup device with changing addresses. Can be toggled
65
+
* through sysfs.
66
+
* @IFF_LOWER_UP: driver signals L1 up. Volatile.
67
+
* @IFF_DORMANT: driver signals dormant. Volatile.
68
+
* @IFF_ECHO: echo sent packets. Volatile.
69
+
*/
70
+
enum net_device_flags {
71
+
IFF_UP = 1<<0, /* sysfs */
72
+
IFF_BROADCAST = 1<<1, /* volatile */
73
+
IFF_DEBUG = 1<<2, /* sysfs */
74
+
IFF_LOOPBACK = 1<<3, /* volatile */
75
+
IFF_POINTOPOINT = 1<<4, /* volatile */
76
+
IFF_NOTRAILERS = 1<<5, /* sysfs */
77
+
IFF_RUNNING = 1<<6, /* volatile */
78
+
IFF_NOARP = 1<<7, /* sysfs */
79
+
IFF_PROMISC = 1<<8, /* sysfs */
80
+
IFF_ALLMULTI = 1<<9, /* sysfs */
81
+
IFF_MASTER = 1<<10, /* volatile */
82
+
IFF_SLAVE = 1<<11, /* volatile */
83
+
IFF_MULTICAST = 1<<12, /* sysfs */
84
+
IFF_PORTSEL = 1<<13, /* sysfs */
85
+
IFF_AUTOMEDIA = 1<<14, /* sysfs */
86
+
IFF_DYNAMIC = 1<<15, /* sysfs */
87
+
IFF_LOWER_UP = 1<<16, /* volatile */
88
+
IFF_DORMANT = 1<<17, /* volatile */
89
+
IFF_ECHO = 1<<18, /* volatile */
90
+
};
41
91
42
-
#define IFF_MASTER 0x400 /* master of a load balancer */
43
-
#define IFF_SLAVE 0x800 /* slave of a load balancer */
44
-
45
-
#define IFF_MULTICAST 0x1000 /* Supports multicast */
46
-
47
-
#define IFF_PORTSEL 0x2000 /* can set media type */
48
-
#define IFF_AUTOMEDIA 0x4000 /* auto media select active */
49
-
#define IFF_DYNAMIC 0x8000 /* dialup device with changing addresses*/
50
-
51
-
#define IFF_LOWER_UP 0x10000 /* driver signals L1 up */
52
-
#define IFF_DORMANT 0x20000 /* driver signals dormant */
53
-
54
-
#define IFF_ECHO 0x40000 /* echo sent packets */
92
+
#define IFF_UP IFF_UP
93
+
#define IFF_BROADCAST IFF_BROADCAST
94
+
#define IFF_DEBUG IFF_DEBUG
95
+
#define IFF_LOOPBACK IFF_LOOPBACK
96
+
#define IFF_POINTOPOINT IFF_POINTOPOINT
97
+
#define IFF_NOTRAILERS IFF_NOTRAILERS
98
+
#define IFF_RUNNING IFF_RUNNING
99
+
#define IFF_NOARP IFF_NOARP
100
+
#define IFF_PROMISC IFF_PROMISC
101
+
#define IFF_ALLMULTI IFF_ALLMULTI
102
+
#define IFF_MASTER IFF_MASTER
103
+
#define IFF_SLAVE IFF_SLAVE
104
+
#define IFF_MULTICAST IFF_MULTICAST
105
+
#define IFF_PORTSEL IFF_PORTSEL
106
+
#define IFF_AUTOMEDIA IFF_AUTOMEDIA
107
+
#define IFF_DYNAMIC IFF_DYNAMIC
108
+
#define IFF_LOWER_UP IFF_LOWER_UP
109
+
#define IFF_DORMANT IFF_DORMANT
110
+
#define IFF_ECHO IFF_ECHO
55
111
56
112
#define IFF_VOLATILE (IFF_LOOPBACK|IFF_POINTOPOINT|IFF_BROADCAST|IFF_ECHO|\
57
113
IFF_MASTER|IFF_SLAVE|IFF_RUNNING|IFF_LOWER_UP|IFF_DORMANT)
58
114
59
-
/* Private (from user) interface flags (netdevice->priv_flags). */
60
-
#define IFF_802_1Q_VLAN 0x1 /* 802.1Q VLAN device. */
61
-
#define IFF_EBRIDGE 0x2 /* Ethernet bridging device. */
62
-
#define IFF_SLAVE_INACTIVE 0x4 /* bonding slave not the curr. active */
63
-
#define IFF_MASTER_8023AD 0x8 /* bonding master, 802.3ad. */
64
-
#define IFF_MASTER_ALB 0x10 /* bonding master, balance-alb. */
65
-
#define IFF_BONDING 0x20 /* bonding master or slave */
66
-
#define IFF_SLAVE_NEEDARP 0x40 /* need ARPs for validation */
67
-
#define IFF_ISATAP 0x80 /* ISATAP interface (RFC4214) */
68
-
#define IFF_MASTER_ARPMON 0x100 /* bonding master, ARP mon in use */
69
-
#define IFF_WAN_HDLC 0x200 /* WAN HDLC device */
70
-
#define IFF_XMIT_DST_RELEASE 0x400 /* dev_hard_start_xmit() is allowed to
71
-
* release skb->dst
72
-
*/
73
-
#define IFF_DONT_BRIDGE 0x800 /* disallow bridging this ether dev */
74
-
#define IFF_DISABLE_NETPOLL 0x1000 /* disable netpoll at run-time */
75
-
#define IFF_MACVLAN_PORT 0x2000 /* device used as macvlan port */
76
-
#define IFF_BRIDGE_PORT 0x4000 /* device used as bridge port */
77
-
#define IFF_OVS_DATAPATH 0x8000 /* device used as Open vSwitch
78
-
* datapath port */
79
-
#define IFF_TX_SKB_SHARING 0x10000 /* The interface supports sharing
80
-
* skbs on transmit */
81
-
#define IFF_UNICAST_FLT 0x20000 /* Supports unicast filtering */
82
-
#define IFF_TEAM_PORT 0x40000 /* device used as team port */
83
-
#define IFF_SUPP_NOFCS 0x80000 /* device supports sending custom FCS */
84
-
#define IFF_LIVE_ADDR_CHANGE 0x100000 /* device supports hardware address
85
-
* change when it's running */
86
-
#define IFF_MACVLAN 0x200000 /* Macvlan device */
115
+
/**
116
+
* enum net_device_priv_flags - &struct net_device priv_flags
117
+
*
118
+
* These are the &struct net_device, they are only set internally
119
+
* by drivers and used in the kernel. These flags are invisible to
120
+
* userspace, this means that the order of these flags can change
121
+
* during any kernel release.
122
+
*
123
+
* You should have a pretty good reason to be extending these flags.
124
+
*
125
+
* @IFF_802_1Q_VLAN: 802.1Q VLAN device
126
+
* @IFF_EBRIDGE: Ethernet bridging device
127
+
* @IFF_SLAVE_INACTIVE: bonding slave not the curr. active
128
+
* @IFF_MASTER_8023AD: bonding master, 802.3ad
129
+
* @IFF_MASTER_ALB: bonding master, balance-alb
130
+
* @IFF_BONDING: bonding master or slave
131
+
* @IFF_SLAVE_NEEDARP: need ARPs for validation
132
+
* @IFF_ISATAP: ISATAP interface (RFC4214)
133
+
* @IFF_MASTER_ARPMON: bonding master, ARP mon in use
134
+
* @IFF_WAN_HDLC: WAN HDLC device
135
+
* @IFF_XMIT_DST_RELEASE: dev_hard_start_xmit() is allowed to
136
+
* release skb->dst
137
+
* @IFF_DONT_BRIDGE: disallow bridging this ether dev
138
+
* @IFF_DISABLE_NETPOLL: disable netpoll at run-time
139
+
* @IFF_MACVLAN_PORT: device used as macvlan port
140
+
* @IFF_BRIDGE_PORT: device used as bridge port
141
+
* @IFF_OVS_DATAPATH: device used as Open vSwitch datapath port
142
+
* @IFF_TX_SKB_SHARING: The interface supports sharing skbs on transmit
143
+
* @IFF_UNICAST_FLT: Supports unicast filtering
144
+
* @IFF_TEAM_PORT: device used as team port
145
+
* @IFF_SUPP_NOFCS: device supports sending custom FCS
146
+
* @IFF_LIVE_ADDR_CHANGE: device supports hardware address
147
+
* change when it's running
148
+
* @IFF_MACVLAN: Macvlan device
149
+
*/
150
+
enum netdev_priv_flags {
151
+
IFF_802_1Q_VLAN = 1<<0,
152
+
IFF_EBRIDGE = 1<<1,
153
+
IFF_SLAVE_INACTIVE = 1<<2,
154
+
IFF_MASTER_8023AD = 1<<3,
155
+
IFF_MASTER_ALB = 1<<4,
156
+
IFF_BONDING = 1<<5,
157
+
IFF_SLAVE_NEEDARP = 1<<6,
158
+
IFF_ISATAP = 1<<7,
159
+
IFF_MASTER_ARPMON = 1<<8,
160
+
IFF_WAN_HDLC = 1<<9,
161
+
IFF_XMIT_DST_RELEASE = 1<<10,
162
+
IFF_DONT_BRIDGE = 1<<11,
163
+
IFF_DISABLE_NETPOLL = 1<<12,
164
+
IFF_MACVLAN_PORT = 1<<13,
165
+
IFF_BRIDGE_PORT = 1<<14,
166
+
IFF_OVS_DATAPATH = 1<<15,
167
+
IFF_TX_SKB_SHARING = 1<<16,
168
+
IFF_UNICAST_FLT = 1<<17,
169
+
IFF_TEAM_PORT = 1<<18,
170
+
IFF_SUPP_NOFCS = 1<<19,
171
+
IFF_LIVE_ADDR_CHANGE = 1<<20,
172
+
IFF_MACVLAN = 1<<21,
173
+
};
87
174
175
+
#define IFF_802_1Q_VLAN IFF_802_1Q_VLAN
176
+
#define IFF_EBRIDGE IFF_EBRIDGE
177
+
#define IFF_SLAVE_INACTIVE IFF_SLAVE_INACTIVE
178
+
#define IFF_MASTER_8023AD IFF_MASTER_8023AD
179
+
#define IFF_MASTER_ALB IFF_MASTER_ALB
180
+
#define IFF_BONDING IFF_BONDING
181
+
#define IFF_SLAVE_NEEDARP IFF_SLAVE_NEEDARP
182
+
#define IFF_ISATAP IFF_ISATAP
183
+
#define IFF_MASTER_ARPMON IFF_MASTER_ARPMON
184
+
#define IFF_WAN_HDLC IFF_WAN_HDLC
185
+
#define IFF_XMIT_DST_RELEASE IFF_XMIT_DST_RELEASE
186
+
#define IFF_DONT_BRIDGE IFF_DONT_BRIDGE
187
+
#define IFF_DISABLE_NETPOLL IFF_DISABLE_NETPOLL
188
+
#define IFF_MACVLAN_PORT IFF_MACVLAN_PORT
189
+
#define IFF_BRIDGE_PORT IFF_BRIDGE_PORT
190
+
#define IFF_OVS_DATAPATH IFF_OVS_DATAPATH
191
+
#define IFF_TX_SKB_SHARING IFF_TX_SKB_SHARING
192
+
#define IFF_UNICAST_FLT IFF_UNICAST_FLT
193
+
#define IFF_TEAM_PORT IFF_TEAM_PORT
194
+
#define IFF_SUPP_NOFCS IFF_SUPP_NOFCS
195
+
#define IFF_LIVE_ADDR_CHANGE IFF_LIVE_ADDR_CHANGE
196
+
#define IFF_MACVLAN IFF_MACVLAN
88
197
89
198
#define IF_GET_IFACE 0x0001 /* for querying only */
90
199
#define IF_GET_PROTO 0x0002