dt-bindings: pinctrl: document the QCS615 Top Level Mode Multiplexer

Document the Top Level Mode Multiplexer on the QCS615 Platform.
It concisely explains the pin multiplexing and configuration in
the device tree, and includes simple examples of typical device
tree snippets, making it easier for designers to configure and
manage chip pins.

Signed-off-by: Lijuan Gao <[e-mail]>
Link: https://lore.kernel.org/[e-mail]
Reviewed-by: Rob Herring (Arm) <[e-mail]>
Signed-off-by: Linus Walleij <[e-mail]>

Documentation/devicetree/bindings/pinctrl/qcom,qcs615-tlmm.yaml

···
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,qcs615-tlmm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. QCS615 TLMM block
+
+maintainers:
+  - Lijuan Gao <[e-mail]>
+
+description:
+  Top Level Mode Multiplexer pin controller in Qualcomm QCS615 SoC.
+
+allOf:
+  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,qcs615-tlmm
+
+  reg:
+    maxItems: 3
+
+  reg-names:
+    items:
+      - const: east
+      - const: west
+      - const: south
+
+  interrupts:
+    maxItems: 1
+
+  gpio-reserved-ranges:
+    minItems: 1
+    maxItems: 62
+
+  gpio-line-names:
+    maxItems: 123
+
+patternProperties:
+  "-state$":
+    oneOf:
+      - $ref: "#/$defs/qcom-qcs615-tlmm-state"
+      - type: object
+        patternProperties:
+          "-pins$":
+            $ref: "#/$defs/qcom-qcs615-tlmm-state"
+        additionalProperties: false
+
+$defs:
+  qcom-qcs615-tlmm-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          oneOf:
+            - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-1][0-9]|12[0-2])$"
+            - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc1_rclk,
+                      sdc2_clk, sdc2_cmd, sdc2_data, ufs_reset ]
+        minItems: 1
+        maxItems: 36
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+        enum: [ gpio, adsp_ext, agera_pll, aoss_cti, atest_char, atest_tsens,
+                atest_usb, cam_mclk, cci_async, cci_i2c, cci_timer, copy_gp,
+                copy_phase, cri_trng, dbg_out_clk, ddr_bist, ddr_pxi, dp_hot,
+                edp_hot, edp_lcd, emac_gcc, emac_phy_intr, forced_usb, gcc_gp,
+                gp_pdm, gps_tx, hs0_mi2s, hs1_mi2s, jitter_bist, ldo_en,
+                ldo_update, m_voc, mclk1, mclk2, mdp_vsync, mdp_vsync0_out,
+                mdp_vsync1_out, mdp_vsync2_out, mdp_vsync3_out, mdp_vsync4_out,
+                mdp_vsync5_out, mi2s_1, mss_lte, nav_pps_in, nav_pps_out,
+                pa_indicator_or, pcie_clk_req, pcie_ep_rst, phase_flag, pll_bist,
+                pll_bypassnl, pll_reset_n, prng_rosc, qdss_cti, qdss_gpio,
+                qlink_enable, qlink_request, qspi, qup0, qup1, rgmii,
+                sd_write_protect, sp_cmu, ter_mi2s, tgu_ch, uim1, uim2, usb0_hs,
+                usb1_hs, usb_phy_ps, vfr_1, vsense_trigger_mirnat, wlan, wsa_clk,
+                wsa_data ]
+
+    required:
+      - pins
+
+required:
+  - compatible
+  - reg
+  - reg-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    tlmm: pinctrl@3000000 {
+        compatible = "qcom,qcs615-tlmm";
+        reg = <0x03100000 0x300000>,
+              <0x03500000 0x300000>,
+              <0x03c00000 0x300000>;
+        reg-names = "east", "west", "south";
+        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+        gpio-ranges = <&tlmm 0 0 123>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+
+        qup3-uart2-state {
+            pins ="gpio16", "gpio17";
+            function = "qup0";
+        };
+    };
+...