dt-bindings: display: Correct indentation and style in DTS example

DTS example in the bindings should be indented with 2- or 4-spaces and
aligned with opening '- |', so correct any differences like 3-spaces or
mixtures 2- and 4-spaces in one binding.

No functional changes here, but saves some comments during reviews of
new patches built on existing code.

Signed-off-by: Krzysztof Kozlowski <[e-mail]>
Reviewed-by: AngeloGioacchino Del Regno <[e-mail]>
Reviewed-by: Martin Blumenstingl <[e-mail]>
Reviewed-by: Abhinav Kumar <[e-mail]>
Reviewed-by: Dmitry Baryshkov <[e-mail]> # msm
Reviewed-by: Geert Uytterhoeven <[e-mail]> # renesas
Link: https://lore.kernel.org/r/[e-mail]
Signed-off-by: Rob Herring (Arm) <[e-mail]>

Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml

···
 
         /* TMDS Output */
         hdmi_tx_tmds_port: port@1 {
-             reg = <1>;
+            reg = <1>;
 
-             hdmi_tx_tmds_out: endpoint {
-                 remote-endpoint = <&hdmi_connector_in>;
-             };
+            hdmi_tx_tmds_out: endpoint {
+                remote-endpoint = <&hdmi_connector_in>;
+            };
         };
     };

Documentation/devicetree/bindings/display/bridge/fsl,imx8mp-hdmi-tx.yaml

···
         power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_HDMI_TX>;
         reg-io-width = <1>;
         ports {
-           #address-cells = <1>;
-           #size-cells = <0>;
-           port@0 {
-             reg = <0>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+            port@0 {
+                reg = <0>;
 
-             hdmi_tx_from_pvi: endpoint {
-               remote-endpoint = <&pvi_to_hdmi_tx>;
-             };
-          };
+                endpoint {
+                    remote-endpoint = <&pvi_to_hdmi_tx>;
+                };
+            };
 
-          port@1 {
-            reg = <1>;
-              hdmi_tx_out: endpoint {
-                remote-endpoint = <&hdmi0_con>;
-              };
-          };
+            port@1 {
+                reg = <1>;
+                endpoint {
+                    remote-endpoint = <&hdmi0_con>;
+                };
+            };
         };
     };

Documentation/devicetree/bindings/display/bridge/samsung,mipi-dsim.yaml

···
     #include <dt-bindings/interrupt-controller/arm-gic.h>
 
     dsi@13900000 {
-       compatible = "samsung,exynos5433-mipi-dsi";
-       reg = <0x13900000 0xC0>;
-       interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
-       phys = <&mipi_phy 1>;
-       phy-names = "dsim";
-       clocks = <&cmu_disp CLK_PCLK_DSIM0>,
-                <&cmu_disp CLK_PHYCLK_MIPIDPHY0_BITCLKDIV8>,
-                <&cmu_disp CLK_PHYCLK_MIPIDPHY0_RXCLKESC0>,
-                <&cmu_disp CLK_SCLK_RGB_VCLK_TO_DSIM0>,
-                <&cmu_disp CLK_SCLK_DSIM0>;
-       clock-names = "bus_clk",
-                     "phyclk_mipidphy0_bitclkdiv8",
-                     "phyclk_mipidphy0_rxclkesc0",
-                     "sclk_rgb_vclk_to_dsim0",
-                     "sclk_mipi";
-       power-domains = <&pd_disp>;
-       vddcore-supply = <&ldo6_reg>;
-       vddio-supply = <&ldo7_reg>;
-       samsung,burst-clock-frequency = <512000000>;
-       samsung,esc-clock-frequency = <16000000>;
-       samsung,pll-clock-frequency = <24000000>;
-       pinctrl-names = "default";
-       pinctrl-0 = <&te_irq>;
+        compatible = "samsung,exynos5433-mipi-dsi";
+        reg = <0x13900000 0xC0>;
+        interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
+        phys = <&mipi_phy 1>;
+        phy-names = "dsim";
+        clocks = <&cmu_disp CLK_PCLK_DSIM0>,
+                 <&cmu_disp CLK_PHYCLK_MIPIDPHY0_BITCLKDIV8>,
+                 <&cmu_disp CLK_PHYCLK_MIPIDPHY0_RXCLKESC0>,
+                 <&cmu_disp CLK_SCLK_RGB_VCLK_TO_DSIM0>,
+                 <&cmu_disp CLK_SCLK_DSIM0>;
+        clock-names = "bus_clk",
+                      "phyclk_mipidphy0_bitclkdiv8",
+                      "phyclk_mipidphy0_rxclkesc0",
+                      "sclk_rgb_vclk_to_dsim0",
+                      "sclk_mipi";
+        power-domains = <&pd_disp>;
+        vddcore-supply = <&ldo6_reg>;
+        vddio-supply = <&ldo7_reg>;
+        samsung,burst-clock-frequency = <512000000>;
+        samsung,esc-clock-frequency = <16000000>;
+        samsung,pll-clock-frequency = <24000000>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&te_irq>;
 
-       ports {
-          #address-cells = <1>;
-          #size-cells = <0>;
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
 
-          port@0 {
-             reg = <0>;
+            port@0 {
+                reg = <0>;
 
-             dsi_to_mic: endpoint {
-                remote-endpoint = <&mic_to_dsi>;
-             };
-          };
-       };
+                dsi_to_mic: endpoint {
+                    remote-endpoint = <&mic_to_dsi>;
+                };
+            };
+        };
     };

Documentation/devicetree/bindings/display/mediatek/mediatek,aal.yaml

···
         #size-cells = <2>;
 
         aal@14015000 {
-           compatible = "mediatek,mt8173-disp-aal";
-           reg = <0 0x14015000 0 0x1000>;
-           interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_LOW>;
-           power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
-           clocks = <&mmsys CLK_MM_DISP_AAL>;
-           mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x5000 0x1000>;
+            compatible = "mediatek,mt8173-disp-aal";
+            reg = <0 0x14015000 0 0x1000>;
+            interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_LOW>;
+            power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+            clocks = <&mmsys CLK_MM_DISP_AAL>;
+            mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x5000 0x1000>;
 
-           ports {
-               #address-cells = <1>;
-               #size-cells = <0>;
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
 
-               port@0 {
-                   reg = <0>;
-                   aal0_in: endpoint {
-                       remote-endpoint = <&ccorr0_out>;
-                   };
-               };
+                port@0 {
+                    reg = <0>;
+                    endpoint {
+                        remote-endpoint = <&ccorr0_out>;
+                    };
+                };
 
-               port@1 {
-                   reg = <1>;
-                   aal0_out: endpoint {
-                       remote-endpoint = <&gamma0_in>;
-                   };
-               };
-           };
-       };
+                port@1 {
+                    reg = <1>;
+                    endpoint {
+                        remote-endpoint = <&gamma0_in>;
+                    };
+                };
+            };
+        };
     };

Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml

···
 
 examples:
   - |
-     #include <dt-bindings/interrupt-controller/arm-gic.h>
-     #include <dt-bindings/clock/qcom,dispcc-sdm845.h>
-     #include <dt-bindings/clock/qcom,gcc-sdm845.h>
-     #include <dt-bindings/power/qcom-rpmpd.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/qcom,dispcc-sdm845.h>
+    #include <dt-bindings/clock/qcom,gcc-sdm845.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
 
-     dsi@ae94000 {
-           compatible = "qcom,sc7180-dsi-ctrl", "qcom,mdss-dsi-ctrl";
-           reg = <0x0ae94000 0x400>;
-           reg-names = "dsi_ctrl";
+    dsi@ae94000 {
+        compatible = "qcom,sc7180-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+        reg = <0x0ae94000 0x400>;
+        reg-names = "dsi_ctrl";
 
-           #address-cells = <1>;
-           #size-cells = <0>;
+        #address-cells = <1>;
+        #size-cells = <0>;
 
-           interrupt-parent = <&mdss>;
-           interrupts = <4>;
+        interrupt-parent = <&mdss>;
+        interrupts = <4>;
 
-           clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
-                    <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
-                    <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
-                    <&dispcc DISP_CC_MDSS_ESC0_CLK>,
-                    <&dispcc DISP_CC_MDSS_AHB_CLK>,
-                    <&dispcc DISP_CC_MDSS_AXI_CLK>;
-           clock-names = "byte",
-                         "byte_intf",
-                         "pixel",
-                         "core",
-                         "iface",
-                         "bus";
+        clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+                 <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+                 <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+                 <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+                 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                 <&dispcc DISP_CC_MDSS_AXI_CLK>;
+        clock-names = "byte",
+                      "byte_intf",
+                      "pixel",
+                      "core",
+                      "iface",
+                      "bus";
 
-           phys = <&dsi0_phy>;
-           phy-names = "dsi";
+        phys = <&dsi0_phy>;
+        phy-names = "dsi";
 
-           assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
-           assigned-clock-parents = <&dsi_phy 0>, <&dsi_phy 1>;
+        assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+        assigned-clock-parents = <&dsi_phy 0>, <&dsi_phy 1>;
 
-           power-domains = <&rpmhpd SC7180_CX>;
-           operating-points-v2 = <&dsi_opp_table>;
+        power-domains = <&rpmhpd SC7180_CX>;
+        operating-points-v2 = <&dsi_opp_table>;
 
-           ports {
-                  #address-cells = <1>;
-                  #size-cells = <0>;
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
 
-                  port@0 {
-                          reg = <0>;
-                          dsi0_in: endpoint {
-                                   remote-endpoint = <&dpu_intf1_out>;
-                          };
-                  };
+            port@0 {
+                reg = <0>;
+                endpoint {
+                    remote-endpoint = <&dpu_intf1_out>;
+                };
+            };
 
-                  port@1 {
-                          reg = <1>;
-                          dsi0_out: endpoint {
-                                   remote-endpoint = <&sn65dsi86_in>;
-                                   data-lanes = <0 1 2 3>;
-                                   qcom,te-source = "mdp_vsync_e";
-                          };
-                  };
-           };
-     };
+            port@1 {
+                reg = <1>;
+                endpoint {
+                    remote-endpoint = <&sn65dsi86_in>;
+                    data-lanes = <0 1 2 3>;
+                    qcom,te-source = "mdp_vsync_e";
+                };
+            };
+        };
+    };
 ...

Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml

···
 
 examples:
   - |
-     #include <dt-bindings/clock/qcom,dispcc-sdm845.h>
-     #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/clock/qcom,dispcc-sdm845.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
 
-     dsi-phy@ae94400 {
-         compatible = "qcom,dsi-phy-10nm";
-         reg = <0x0ae94400 0x200>,
-               <0x0ae94600 0x280>,
-               <0x0ae94a00 0x1e0>;
-         reg-names = "dsi_phy",
-                     "dsi_phy_lane",
-                     "dsi_pll";
+    dsi-phy@ae94400 {
+        compatible = "qcom,dsi-phy-10nm";
+        reg = <0x0ae94400 0x200>,
+              <0x0ae94600 0x280>,
+              <0x0ae94a00 0x1e0>;
+        reg-names = "dsi_phy",
+                    "dsi_phy_lane",
+                    "dsi_pll";
 
-         #clock-cells = <1>;
-         #phy-cells = <0>;
+        #clock-cells = <1>;
+        #phy-cells = <0>;
 
-         vdds-supply = <&vdda_mipi_dsi0_pll>;
-         clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
-                  <&rpmhcc RPMH_CXO_CLK>;
-         clock-names = "iface", "ref";
+        vdds-supply = <&vdda_mipi_dsi0_pll>;
+        clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                 <&rpmhcc RPMH_CXO_CLK>;
+        clock-names = "iface", "ref";
 
-         qcom,phy-rescode-offset-top = /bits/ 8 <0 0 0 0 0>;
-         qcom,phy-rescode-offset-bot = /bits/ 8 <0 0 0 0 0>;
-         qcom,phy-drive-ldo-level = <400>;
-     };
+        qcom,phy-rescode-offset-top = /bits/ 8 <0 0 0 0 0>;
+        qcom,phy-rescode-offset-bot = /bits/ 8 <0 0 0 0 0>;
+        qcom,phy-drive-ldo-level = <400>;
+    };
 ...

Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml

···
 
 examples:
   - |
-     #include <dt-bindings/clock/qcom,dispcc-sdm845.h>
-     #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/clock/qcom,dispcc-sdm845.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
 
-     dsi-phy@ae94400 {
-         compatible = "qcom,dsi-phy-14nm";
-         reg = <0x0ae94400 0x200>,
-               <0x0ae94600 0x280>,
-               <0x0ae94a00 0x1e0>;
-         reg-names = "dsi_phy",
-                     "dsi_phy_lane",
-                     "dsi_pll";
+    dsi-phy@ae94400 {
+        compatible = "qcom,dsi-phy-14nm";
+        reg = <0x0ae94400 0x200>,
+              <0x0ae94600 0x280>,
+              <0x0ae94a00 0x1e0>;
+        reg-names = "dsi_phy",
+                    "dsi_phy_lane",
+                    "dsi_pll";
 
-         #clock-cells = <1>;
-         #phy-cells = <0>;
+        #clock-cells = <1>;
+        #phy-cells = <0>;
 
-         vcca-supply = <&vcca_reg>;
-         clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
-                  <&rpmhcc RPMH_CXO_CLK>;
-         clock-names = "iface", "ref";
-     };
+        vcca-supply = <&vcca_reg>;
+        clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                 <&rpmhcc RPMH_CXO_CLK>;
+        clock-names = "iface", "ref";
+    };
 ...

Documentation/devicetree/bindings/display/msm/dsi-phy-20nm.yaml

···
 
 examples:
   - |
-     #include <dt-bindings/clock/qcom,dispcc-sdm845.h>
-     #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/clock/qcom,dispcc-sdm845.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
 
-     dsi-phy@fd922a00 {
-         compatible = "qcom,dsi-phy-20nm";
-         reg = <0xfd922a00 0xd4>,
-               <0xfd922b00 0x2b0>,
-               <0xfd922d80 0x7b>;
-         reg-names = "dsi_pll",
-                     "dsi_phy",
-                     "dsi_phy_regulator";
+    dsi-phy@fd922a00 {
+        compatible = "qcom,dsi-phy-20nm";
+        reg = <0xfd922a00 0xd4>,
+              <0xfd922b00 0x2b0>,
+              <0xfd922d80 0x7b>;
+        reg-names = "dsi_pll",
+                    "dsi_phy",
+                    "dsi_phy_regulator";
 
-         #clock-cells = <1>;
-         #phy-cells = <0>;
+        #clock-cells = <1>;
+        #phy-cells = <0>;
 
-         vcca-supply = <&vcca_reg>;
-         vddio-supply = <&vddio_reg>;
+        vcca-supply = <&vcca_reg>;
+        vddio-supply = <&vddio_reg>;
 
-         clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
-                  <&rpmhcc RPMH_CXO_CLK>;
-         clock-names = "iface", "ref";
-     };
+        clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                 <&rpmhcc RPMH_CXO_CLK>;
+        clock-names = "iface", "ref";
+    };
 ...

Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml

···
 
 examples:
   - |
-     #include <dt-bindings/clock/qcom,dispcc-sdm845.h>
-     #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/clock/qcom,dispcc-sdm845.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
 
-     dsi-phy@fd922a00 {
-         compatible = "qcom,dsi-phy-28nm-lp";
-         reg = <0xfd922a00 0xd4>,
-               <0xfd922b00 0x2b0>,
-               <0xfd922d80 0x7b>;
-         reg-names = "dsi_pll",
-                     "dsi_phy",
-                     "dsi_phy_regulator";
+    dsi-phy@fd922a00 {
+        compatible = "qcom,dsi-phy-28nm-lp";
+        reg = <0xfd922a00 0xd4>,
+              <0xfd922b00 0x2b0>,
+              <0xfd922d80 0x7b>;
+        reg-names = "dsi_pll",
+                    "dsi_phy",
+                    "dsi_phy_regulator";
 
-         #clock-cells = <1>;
-         #phy-cells = <0>;
+        #clock-cells = <1>;
+        #phy-cells = <0>;
 
-         vddio-supply = <&vddio_reg>;
+        vddio-supply = <&vddio_reg>;
 
-         clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
-                  <&rpmhcc RPMH_CXO_CLK>;
-         clock-names = "iface", "ref";
-     };
+        clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                 <&rpmhcc RPMH_CXO_CLK>;
+        clock-names = "iface", "ref";
+    };
 ...

Documentation/devicetree/bindings/display/msm/dsi-phy-7nm.yaml

···
 
 examples:
   - |
-     #include <dt-bindings/clock/qcom,dispcc-sm8250.h>
-     #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/clock/qcom,dispcc-sm8250.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
 
-     dsi-phy@ae94400 {
-         compatible = "qcom,dsi-phy-7nm";
-         reg = <0x0ae94400 0x200>,
-               <0x0ae94600 0x280>,
-               <0x0ae94900 0x260>;
-         reg-names = "dsi_phy",
-                     "dsi_phy_lane",
-                     "dsi_pll";
+    dsi-phy@ae94400 {
+        compatible = "qcom,dsi-phy-7nm";
+        reg = <0x0ae94400 0x200>,
+              <0x0ae94600 0x280>,
+              <0x0ae94900 0x260>;
+        reg-names = "dsi_phy",
+                    "dsi_phy_lane",
+                    "dsi_pll";
 
-         #clock-cells = <1>;
-         #phy-cells = <0>;
+        #clock-cells = <1>;
+        #phy-cells = <0>;
 
-         vdds-supply = <&vreg_l5a_0p88>;
-         clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
-                  <&rpmhcc RPMH_CXO_CLK>;
-         clock-names = "iface", "ref";
-     };
+        vdds-supply = <&vreg_l5a_0p88>;
+        clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                 <&rpmhcc RPMH_CXO_CLK>;
+        clock-names = "iface", "ref";
+    };

Documentation/devicetree/bindings/display/msm/qcom,sa8775p-mdss.yaml

···
                              "mdp1-mem",
                              "cpu-cfg";
 
-
         resets = <&dispcc_core_bcr>;
         power-domains = <&dispcc_gdsc>;
 
···
                 port@0 {
                     reg = <0>;
                     dpu_intf0_out: endpoint {
-                         remote-endpoint = <&mdss0_dp0_in>;
+                        remote-endpoint = <&mdss0_dp0_in>;
                     };
                 };
             };
···
                 };
 
                 port@1 {
-                   reg = <1>;
-                   mdss0_dp_out: endpoint { };
+                    reg = <1>;
+                    mdss0_dp_out: endpoint { };
                 };
             };
 

Documentation/devicetree/bindings/display/renesas,cmm.yaml

···
     #include <dt-bindings/power/r8a7796-sysc.h>
 
     cmm0: cmm@fea40000 {
-         compatible = "renesas,r8a7796-cmm",
-                      "renesas,rcar-gen3-cmm";
-         reg = <0xfea40000 0x1000>;
-         power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
-         clocks = <&cpg CPG_MOD 711>;
-         resets = <&cpg 711>;
+        compatible = "renesas,r8a7796-cmm",
+                     "renesas,rcar-gen3-cmm";
+        reg = <0xfea40000 0x1000>;
+        power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+        clocks = <&cpg CPG_MOD 711>;
+        resets = <&cpg 711>;
     };