phy: qcom-qmp: add QMP V2 PCIe PHY support for ipq60xx

Based on code from downstream Codeaurora tree. The ipq60xx has one gen3
PCIe port.

Signed-off-by: Selvam Sathappan Periakaruppan <[e-mail]>
Signed-off-by: Baruch Siach <[e-mail]>
Link: https://lore.kernel.org/r/[e-mail]
Signed-off-by: Vinod Koul <[e-mail]>

drivers/phy/qualcomm/phy-qcom-qmp.c

···
 	[QPHY_PCS_READY_STATUS]		= 0x168,
 };
 
+static const unsigned int ipq_pciephy_gen3_regs_layout[QPHY_LAYOUT_SIZE] = {
+	[QPHY_SW_RESET]				= 0x00,
+	[QPHY_START_CTRL]			= 0x44,
+	[QPHY_PCS_STATUS]			= 0x14,
+	[QPHY_PCS_POWER_DOWN_CONTROL]		= 0x40,
+};
+
 static const unsigned int pciephy_regs_layout[QPHY_LAYOUT_SIZE] = {
 	[QPHY_COM_SW_RESET]		= 0x400,
 	[QPHY_COM_POWER_DOWN_CONTROL]	= 0x404,
···
 	QMP_PHY_INIT_CFG(QPHY_LOCK_DETECT_CONFIG2, 0x1f),
 	QMP_PHY_INIT_CFG(QPHY_LOCK_DETECT_CONFIG3, 0x47),
 	QMP_PHY_INIT_CFG(QPHY_POWER_STATE_CONFIG2, 0x08),
+};
+
+static const struct qmp_phy_init_tbl ipq6018_pcie_serdes_tbl[] = {
+	QMP_PHY_INIT_CFG(QSERDES_PLL_SSC_PER1, 0x7d),
+	QMP_PHY_INIT_CFG(QSERDES_PLL_SSC_PER2, 0x01),
+	QMP_PHY_INIT_CFG(QSERDES_PLL_SSC_STEP_SIZE1_MODE0, 0x0a),
+	QMP_PHY_INIT_CFG(QSERDES_PLL_SSC_STEP_SIZE2_MODE0, 0x05),
+	QMP_PHY_INIT_CFG(QSERDES_PLL_SSC_STEP_SIZE1_MODE1, 0x08),
+	QMP_PHY_INIT_CFG(QSERDES_PLL_SSC_STEP_SIZE2_MODE1, 0x04),
+	QMP_PHY_INIT_CFG(QSERDES_PLL_BIAS_EN_CLKBUFLR_EN, 0x18),
+	QMP_PHY_INIT_CFG(QSERDES_PLL_CLK_ENABLE1, 0x90),
+	QMP_PHY_INIT_CFG(QSERDES_PLL_SYS_CLK_CTRL, 0x02),
+	QMP_PHY_INIT_CFG(QSERDES_PLL_SYSCLK_BUF_ENABLE, 0x07),
+	QMP_PHY_INIT_CFG(QSERDES_PLL_PLL_IVCO, 0x0f),
+	QMP_PHY_INIT_CFG(QSERDES_PLL_LOCK_CMP1_MODE0, 0xd4),
+	QMP_PHY_INIT_CFG(QSERDES_PLL_LOCK_CMP2_MODE0, 0x14),
+	QMP_PHY_INIT_CFG(QSERDES_PLL_LOCK_CMP1_MODE1, 0xaa),
+	QMP_PHY_INIT_CFG(QSERDES_PLL_LOCK_CMP2_MODE1, 0x29),
+	QMP_PHY_INIT_CFG(QSERDES_PLL_BG_TRIM, 0x0f),
+	QMP_PHY_INIT_CFG(QSERDES_PLL_CP_CTRL_MODE0, 0x09),
+	QMP_PHY_INIT_CFG(QSERDES_PLL_CP_CTRL_MODE1, 0x09),
+	QMP_PHY_INIT_CFG(QSERDES_PLL_PLL_RCTRL_MODE0, 0x16),
+	QMP_PHY_INIT_CFG(QSERDES_PLL_PLL_RCTRL_MODE1, 0x16),
+	QMP_PHY_INIT_CFG(QSERDES_PLL_PLL_CCTRL_MODE0, 0x28),
+	QMP_PHY_INIT_CFG(QSERDES_PLL_PLL_CCTRL_MODE1, 0x28),
+	QMP_PHY_INIT_CFG(QSERDES_PLL_BIAS_EN_CTRL_BY_PSM, 0x01),
+	QMP_PHY_INIT_CFG(QSERDES_PLL_SYSCLK_EN_SEL, 0x08),
+	QMP_PHY_INIT_CFG(QSERDES_PLL_RESETSM_CNTRL, 0x20),
+	QMP_PHY_INIT_CFG(QSERDES_PLL_LOCK_CMP_EN, 0x42),
+	QMP_PHY_INIT_CFG(QSERDES_PLL_DEC_START_MODE0, 0x68),
+	QMP_PHY_INIT_CFG(QSERDES_PLL_DEC_START_MODE1, 0x53),
+	QMP_PHY_INIT_CFG(QSERDES_PLL_DIV_FRAC_START1_MODE0, 0xab),
+	QMP_PHY_INIT_CFG(QSERDES_PLL_DIV_FRAC_START2_MODE0, 0xaa),
+	QMP_PHY_INIT_CFG(QSERDES_PLL_DIV_FRAC_START3_MODE0, 0x02),
+	QMP_PHY_INIT_CFG(QSERDES_PLL_DIV_FRAC_START1_MODE1, 0x55),
+	QMP_PHY_INIT_CFG(QSERDES_PLL_DIV_FRAC_START2_MODE1, 0x55),
+	QMP_PHY_INIT_CFG(QSERDES_PLL_DIV_FRAC_START3_MODE1, 0x05),
+	QMP_PHY_INIT_CFG(QSERDES_PLL_INTEGLOOP_GAIN0_MODE0, 0xa0),
+	QMP_PHY_INIT_CFG(QSERDES_PLL_INTEGLOOP_GAIN0_MODE1, 0xa0),
+	QMP_PHY_INIT_CFG(QSERDES_PLL_VCO_TUNE1_MODE0, 0x24),
+	QMP_PHY_INIT_CFG(QSERDES_PLL_VCO_TUNE2_MODE0, 0x02),
+	QMP_PHY_INIT_CFG(QSERDES_PLL_VCO_TUNE1_MODE1, 0xb4),
+	QMP_PHY_INIT_CFG(QSERDES_PLL_VCO_TUNE2_MODE1, 0x03),
+	QMP_PHY_INIT_CFG(QSERDES_PLL_CLK_SELECT, 0x32),
+	QMP_PHY_INIT_CFG(QSERDES_PLL_HSCLK_SEL, 0x01),
+	QMP_PHY_INIT_CFG(QSERDES_PLL_CORE_CLK_EN, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_PLL_CMN_CONFIG, 0x06),
+	QMP_PHY_INIT_CFG(QSERDES_PLL_SVS_MODE_CLK_SEL, 0x05),
+	QMP_PHY_INIT_CFG(QSERDES_PLL_CORECLK_DIV_MODE1, 0x08),
+};
+
+static const struct qmp_phy_init_tbl ipq6018_pcie_tx_tbl[] = {
+	QMP_PHY_INIT_CFG(QSERDES_TX0_RES_CODE_LANE_OFFSET_TX, 0x02),
+	QMP_PHY_INIT_CFG(QSERDES_TX0_LANE_MODE_1, 0x06),
+	QMP_PHY_INIT_CFG(QSERDES_TX0_RCV_DETECT_LVL_2, 0x12),
+};
+
+static const struct qmp_phy_init_tbl ipq6018_pcie_rx_tbl[] = {
+	QMP_PHY_INIT_CFG(QSERDES_RX0_UCDR_FO_GAIN, 0x0c),
+	QMP_PHY_INIT_CFG(QSERDES_RX0_UCDR_SO_GAIN, 0x02),
+	QMP_PHY_INIT_CFG(QSERDES_RX0_UCDR_SO_SATURATION_AND_ENABLE, 0x7f),
+	QMP_PHY_INIT_CFG(QSERDES_RX0_UCDR_PI_CONTROLS, 0x70),
+	QMP_PHY_INIT_CFG(QSERDES_RX0_RX_EQU_ADAPTOR_CNTRL2, 0x61),
+	QMP_PHY_INIT_CFG(QSERDES_RX0_RX_EQU_ADAPTOR_CNTRL3, 0x04),
+	QMP_PHY_INIT_CFG(QSERDES_RX0_RX_EQU_ADAPTOR_CNTRL4, 0x1e),
+	QMP_PHY_INIT_CFG(QSERDES_RX0_RX_IDAC_TSETTLE_LOW, 0xc0),
+	QMP_PHY_INIT_CFG(QSERDES_RX0_RX_IDAC_TSETTLE_HIGH, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_RX0_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x73),
+	QMP_PHY_INIT_CFG(QSERDES_RX0_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
+	QMP_PHY_INIT_CFG(QSERDES_RX0_SIGDET_ENABLES, 0x1c),
+	QMP_PHY_INIT_CFG(QSERDES_RX0_SIGDET_CNTRL, 0x03),
+	QMP_PHY_INIT_CFG(QSERDES_RX0_SIGDET_DEGLITCH_CNTRL, 0x14),
+	QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_00_LOW, 0xf0),
+	QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_00_HIGH, 0x01),
+	QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_00_HIGH2, 0x2f),
+	QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_00_HIGH3, 0xd3),
+	QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_00_HIGH4, 0x40),
+	QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_01_LOW, 0x01),
+	QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_01_HIGH, 0x02),
+	QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_01_HIGH2, 0xc8),
+	QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_01_HIGH3, 0x09),
+	QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_01_HIGH4, 0xb1),
+	QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_10_LOW, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_10_HIGH, 0x02),
+	QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_10_HIGH2, 0xc8),
+	QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_10_HIGH3, 0x09),
+	QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_10_HIGH4, 0xb1),
+	QMP_PHY_INIT_CFG(QSERDES_RX0_DFE_EN_TIMER, 0x04),
+};
+
+static const struct qmp_phy_init_tbl ipq6018_pcie_pcs_tbl[] = {
+	QMP_PHY_INIT_CFG(PCS_COM_FLL_CNTRL1, 0x01),
+	QMP_PHY_INIT_CFG(PCS_COM_REFGEN_REQ_CONFIG1, 0x0d),
+	QMP_PHY_INIT_CFG(PCS_COM_G12S1_TXDEEMPH_M3P5DB, 0x10),
+	QMP_PHY_INIT_CFG(PCS_COM_RX_SIGDET_LVL, 0xaa),
+	QMP_PHY_INIT_CFG(PCS_COM_P2U3_WAKEUP_DLY_TIME_AUXCLK_L, 0x01),
+	QMP_PHY_INIT_CFG(PCS_COM_RX_DCC_CAL_CONFIG, 0x01),
+	QMP_PHY_INIT_CFG(PCS_COM_EQ_CONFIG5, 0x01),
+	QMP_PHY_INIT_CFG(PCS_PCIE_POWER_STATE_CONFIG2, 0x0d),
+	QMP_PHY_INIT_CFG(PCS_PCIE_POWER_STATE_CONFIG4, 0x07),
+	QMP_PHY_INIT_CFG(PCS_PCIE_ENDPOINT_REFCLK_DRIVE, 0xc1),
+	QMP_PHY_INIT_CFG(PCS_PCIE_L1P1_WAKEUP_DLY_TIME_AUXCLK_L, 0x01),
+	QMP_PHY_INIT_CFG(PCS_PCIE_L1P2_WAKEUP_DLY_TIME_AUXCLK_L, 0x01),
+	QMP_PHY_INIT_CFG(PCS_PCIE_OSC_DTCT_ACTIONS, 0x00),
+	QMP_PHY_INIT_CFG(PCS_PCIE_EQ_CONFIG1, 0x11),
+	QMP_PHY_INIT_CFG(PCS_PCIE_PRESET_P10_PRE, 0x00),
+	QMP_PHY_INIT_CFG(PCS_PCIE_PRESET_P10_POST, 0x58),
 };
 
 static const struct qmp_phy_init_tbl ipq8074_pcie_serdes_tbl[] = {
···
 	.vreg_list		= NULL,
 	.num_vregs		= 0,
 	.regs			= pciephy_regs_layout,
+
+	.start_ctrl		= SERDES_START | PCS_START,
+	.pwrdn_ctrl		= SW_PWRDN | REFCLK_DRV_DSBL,
+
+	.has_phy_com_ctrl	= false,
+	.has_lane_rst		= false,
+	.has_pwrdn_delay	= true,
+	.pwrdn_delay_min	= 995,		/* us */
+	.pwrdn_delay_max	= 1005,		/* us */
+};
+
+static const struct qmp_phy_cfg ipq6018_pciephy_cfg = {
+	.type			= PHY_TYPE_PCIE,
+	.nlanes			= 1,
+
+	.serdes_tbl		= ipq6018_pcie_serdes_tbl,
+	.serdes_tbl_num		= ARRAY_SIZE(ipq6018_pcie_serdes_tbl),
+	.tx_tbl			= ipq6018_pcie_tx_tbl,
+	.tx_tbl_num		= ARRAY_SIZE(ipq6018_pcie_tx_tbl),
+	.rx_tbl			= ipq6018_pcie_rx_tbl,
+	.rx_tbl_num		= ARRAY_SIZE(ipq6018_pcie_rx_tbl),
+	.pcs_tbl		= ipq6018_pcie_pcs_tbl,
+	.pcs_tbl_num		= ARRAY_SIZE(ipq6018_pcie_pcs_tbl),
+	.clk_list		= ipq8074_pciephy_clk_l,
+	.num_clks		= ARRAY_SIZE(ipq8074_pciephy_clk_l),
+	.reset_list		= ipq8074_pciephy_reset_l,
+	.num_resets		= ARRAY_SIZE(ipq8074_pciephy_reset_l),
+	.vreg_list		= NULL,
+	.num_vregs		= 0,
+	.regs			= ipq_pciephy_gen3_regs_layout,
 
 	.start_ctrl		= SERDES_START | PCS_START,
 	.pwrdn_ctrl		= SW_PWRDN | REFCLK_DRV_DSBL,
···
 	}, {
 		.compatible = "qcom,ipq8074-qmp-pcie-phy",
 		.data = &ipq8074_pciephy_cfg,
+	}, {
+		.compatible = "qcom,ipq6018-qmp-pcie-phy",
+		.data = &ipq6018_pciephy_cfg,
 	}, {
 		.compatible = "qcom,sc7180-qmp-usb3-phy",
 		.data = &sc7180_usb3phy_cfg,

drivers/phy/qualcomm/phy-qcom-qmp.h

···
 #ifndef QCOM_PHY_QMP_H_
 #define QCOM_PHY_QMP_H_
 
+/* QMP V2 PHY for PCIE gen3 ports - QSERDES PLL registers */
+
+#define QSERDES_PLL_BG_TIMER				0x00c
+#define QSERDES_PLL_SSC_PER1				0x01c
+#define QSERDES_PLL_SSC_PER2				0x020
+#define QSERDES_PLL_SSC_STEP_SIZE1_MODE0		0x024
+#define QSERDES_PLL_SSC_STEP_SIZE2_MODE0		0x028
+#define QSERDES_PLL_SSC_STEP_SIZE1_MODE1		0x02c
+#define QSERDES_PLL_SSC_STEP_SIZE2_MODE1		0x030
+#define QSERDES_PLL_BIAS_EN_CLKBUFLR_EN			0x03c
+#define QSERDES_PLL_CLK_ENABLE1				0x040
+#define QSERDES_PLL_SYS_CLK_CTRL			0x044
+#define QSERDES_PLL_SYSCLK_BUF_ENABLE			0x048
+#define QSERDES_PLL_PLL_IVCO				0x050
+#define QSERDES_PLL_LOCK_CMP1_MODE0			0x054
+#define QSERDES_PLL_LOCK_CMP2_MODE0			0x058
+#define QSERDES_PLL_LOCK_CMP1_MODE1			0x060
+#define QSERDES_PLL_LOCK_CMP2_MODE1			0x064
+#define QSERDES_PLL_BG_TRIM				0x074
+#define QSERDES_PLL_CLK_EP_DIV_MODE0			0x078
+#define QSERDES_PLL_CLK_EP_DIV_MODE1			0x07c
+#define QSERDES_PLL_CP_CTRL_MODE0			0x080
+#define QSERDES_PLL_CP_CTRL_MODE1			0x084
+#define QSERDES_PLL_PLL_RCTRL_MODE0			0x088
+#define QSERDES_PLL_PLL_RCTRL_MODE1			0x08C
+#define QSERDES_PLL_PLL_CCTRL_MODE0			0x090
+#define QSERDES_PLL_PLL_CCTRL_MODE1			0x094
+#define QSERDES_PLL_BIAS_EN_CTRL_BY_PSM			0x0a4
+#define QSERDES_PLL_SYSCLK_EN_SEL			0x0a8
+#define QSERDES_PLL_RESETSM_CNTRL			0x0b0
+#define QSERDES_PLL_LOCK_CMP_EN				0x0c4
+#define QSERDES_PLL_DEC_START_MODE0			0x0cc
+#define QSERDES_PLL_DEC_START_MODE1			0x0d0
+#define QSERDES_PLL_DIV_FRAC_START1_MODE0		0x0d8
+#define QSERDES_PLL_DIV_FRAC_START2_MODE0		0x0dc
+#define QSERDES_PLL_DIV_FRAC_START3_MODE0		0x0e0
+#define QSERDES_PLL_DIV_FRAC_START1_MODE1		0x0e4
+#define QSERDES_PLL_DIV_FRAC_START2_MODE1		0x0e8
+#define QSERDES_PLL_DIV_FRAC_START3_MODE1		0x0eC
+#define QSERDES_PLL_INTEGLOOP_GAIN0_MODE0		0x100
+#define QSERDES_PLL_INTEGLOOP_GAIN1_MODE0		0x104
+#define QSERDES_PLL_INTEGLOOP_GAIN0_MODE1		0x108
+#define QSERDES_PLL_INTEGLOOP_GAIN1_MODE1		0x10c
+#define QSERDES_PLL_VCO_TUNE_MAP			0x120
+#define QSERDES_PLL_VCO_TUNE1_MODE0			0x124
+#define QSERDES_PLL_VCO_TUNE2_MODE0			0x128
+#define QSERDES_PLL_VCO_TUNE1_MODE1			0x12c
+#define QSERDES_PLL_VCO_TUNE2_MODE1			0x130
+#define QSERDES_PLL_VCO_TUNE_TIMER1			0x13c
+#define QSERDES_PLL_VCO_TUNE_TIMER2			0x140
+#define QSERDES_PLL_CLK_SELECT				0x16c
+#define QSERDES_PLL_HSCLK_SEL				0x170
+#define QSERDES_PLL_CORECLK_DIV				0x17c
+#define QSERDES_PLL_CORE_CLK_EN				0x184
+#define QSERDES_PLL_CMN_CONFIG				0x18c
+#define QSERDES_PLL_SVS_MODE_CLK_SEL			0x194
+#define QSERDES_PLL_CORECLK_DIV_MODE1			0x1b4
+
+/* QMP V2 PHY for PCIE gen3 ports - QSERDES TX registers */
+
+#define QSERDES_TX0_RES_CODE_LANE_OFFSET_TX		0x03c
+#define QSERDES_TX0_HIGHZ_DRVR_EN			0x058
+#define QSERDES_TX0_LANE_MODE_1				0x084
+#define QSERDES_TX0_RCV_DETECT_LVL_2			0x09c
+
+/* QMP V2 PHY for PCIE gen3 ports - QSERDES RX registers */
+
+#define QSERDES_RX0_UCDR_FO_GAIN			0x008
+#define QSERDES_RX0_UCDR_SO_GAIN			0x014
+#define QSERDES_RX0_UCDR_SO_SATURATION_AND_ENABLE	0x034
+#define QSERDES_RX0_UCDR_PI_CONTROLS			0x044
+#define QSERDES_RX0_RX_EQU_ADAPTOR_CNTRL2		0x0ec
+#define QSERDES_RX0_RX_EQU_ADAPTOR_CNTRL3		0x0f0
+#define QSERDES_RX0_RX_EQU_ADAPTOR_CNTRL4		0x0f4
+#define QSERDES_RX0_RX_IDAC_TSETTLE_LOW			0x0f8
+#define QSERDES_RX0_RX_IDAC_TSETTLE_HIGH		0x0fc
+#define QSERDES_RX0_RX_EQ_OFFSET_ADAPTOR_CNTRL1		0x110
+#define QSERDES_RX0_RX_OFFSET_ADAPTOR_CNTRL2		0x114
+#define QSERDES_RX0_SIGDET_ENABLES			0x118
+#define QSERDES_RX0_SIGDET_CNTRL			0x11c
+#define QSERDES_RX0_SIGDET_DEGLITCH_CNTRL		0x124
+#define QSERDES_RX0_RX_MODE_00_LOW			0x170
+#define QSERDES_RX0_RX_MODE_00_HIGH			0x174
+#define QSERDES_RX0_RX_MODE_00_HIGH2			0x178
+#define QSERDES_RX0_RX_MODE_00_HIGH3			0x17c
+#define QSERDES_RX0_RX_MODE_00_HIGH4			0x180
+#define QSERDES_RX0_RX_MODE_01_LOW			0x184
+#define QSERDES_RX0_RX_MODE_01_HIGH			0x188
+#define QSERDES_RX0_RX_MODE_01_HIGH2			0x18c
+#define QSERDES_RX0_RX_MODE_01_HIGH3			0x190
+#define QSERDES_RX0_RX_MODE_01_HIGH4			0x194
+#define QSERDES_RX0_RX_MODE_10_LOW			0x198
+#define QSERDES_RX0_RX_MODE_10_HIGH			0x19c
+#define QSERDES_RX0_RX_MODE_10_HIGH2			0x1a0
+#define QSERDES_RX0_RX_MODE_10_HIGH3			0x1a4
+#define QSERDES_RX0_RX_MODE_10_HIGH4			0x1a8
+#define QSERDES_RX0_DFE_EN_TIMER			0x1b4
+
+/* QMP V2 PHY for PCIE gen3 ports - PCS registers */
+
+#define PCS_COM_FLL_CNTRL1				0x098
+#define PCS_COM_FLL_CNTRL2				0x09c
+#define PCS_COM_FLL_CNT_VAL_L				0x0a0
+#define PCS_COM_FLL_CNT_VAL_H_TOL			0x0a4
+#define PCS_COM_FLL_MAN_CODE				0x0a8
+#define PCS_COM_REFGEN_REQ_CONFIG1			0x0dc
+#define PCS_COM_G12S1_TXDEEMPH_M3P5DB			0x16c
+#define PCS_COM_RX_SIGDET_LVL				0x188
+#define PCS_COM_P2U3_WAKEUP_DLY_TIME_AUXCLK_L		0x1a4
+#define PCS_COM_P2U3_WAKEUP_DLY_TIME_AUXCLK_H		0x1a8
+#define PCS_COM_RX_DCC_CAL_CONFIG			0x1d8
+#define PCS_COM_EQ_CONFIG5				0x1ec
+
+/* QMP V2 PHY for PCIE gen3 ports - PCS Misc registers */
+
+#define PCS_PCIE_POWER_STATE_CONFIG2			0x40c
+#define PCS_PCIE_POWER_STATE_CONFIG4			0x414
+#define PCS_PCIE_ENDPOINT_REFCLK_DRIVE			0x41c
+#define PCS_PCIE_L1P1_WAKEUP_DLY_TIME_AUXCLK_L		0x440
+#define PCS_PCIE_L1P1_WAKEUP_DLY_TIME_AUXCLK_H		0x444
+#define PCS_PCIE_L1P2_WAKEUP_DLY_TIME_AUXCLK_L		0x448
+#define PCS_PCIE_L1P2_WAKEUP_DLY_TIME_AUXCLK_H		0x44c
+#define PCS_PCIE_OSC_DTCT_CONFIG2			0x45c
+#define PCS_PCIE_OSC_DTCT_MODE2_CONFIG2			0x478
+#define PCS_PCIE_OSC_DTCT_MODE2_CONFIG4			0x480
+#define PCS_PCIE_OSC_DTCT_MODE2_CONFIG5			0x484
+#define PCS_PCIE_OSC_DTCT_ACTIONS			0x490
+#define PCS_PCIE_EQ_CONFIG1				0x4a0
+#define PCS_PCIE_EQ_CONFIG2				0x4a4
+#define PCS_PCIE_PRESET_P10_PRE				0x4bc
+#define PCS_PCIE_PRESET_P10_POST			0x4e0
+
 /* Only for QMP V2 PHY - QSERDES COM registers */
 #define QSERDES_COM_BG_TIMER				0x00c
 #define QSERDES_COM_SSC_EN_CENTER			0x010