Linux kernel mirror (for testing) git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
kernel os linux

USB: OHCI support for PNX8550

OHCI HCD (Host Controller Driver) for USB. Bus Glue for PNX8550.

Signed-off-by: Vitaly Wool <vitalywool@gmail.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

authored by

Vitaly Wool and committed by
Greg Kroah-Hartman
5151d040 23d10a9e

+262
+4
drivers/usb/host/ohci-hcd.c
··· 885 885 #include "ohci-au1xxx.c" 886 886 #endif 887 887 888 + #ifdef CONFIG_PNX8550 889 + #include "ohci-pnx8550.c" 890 + #endif 891 + 888 892 #ifdef CONFIG_USB_OHCI_HCD_PPC_SOC 889 893 #include "ohci-ppc-soc.c" 890 894 #endif
+258
drivers/usb/host/ohci-pnx8550.c
··· 1 + /* 2 + * OHCI HCD (Host Controller Driver) for USB. 3 + * 4 + * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at> 5 + * (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net> 6 + * (C) Copyright 2002 Hewlett-Packard Company 7 + * (C) Copyright 2005 Embedded Alley Solutions, Inc. 8 + * 9 + * Bus Glue for PNX8550 10 + * 11 + * Written by Christopher Hoover <ch@hpl.hp.com> 12 + * Based on fragments of previous driver by Russell King et al. 13 + * 14 + * Modified for LH7A404 from ohci-sa1111.c 15 + * by Durgesh Pattamatta <pattamattad@sharpsec.com> 16 + * 17 + * Modified for PNX8550 from ohci-sa1111.c and sa-omap.c 18 + * by Vitaly Wool <vitalywool@gmail.com> 19 + * 20 + * This file is licenced under the GPL. 21 + */ 22 + 23 + #include <linux/device.h> 24 + #include <linux/platform_device.h> 25 + #include <asm/mach-pnx8550/usb.h> 26 + #include <asm/mach-pnx8550/int.h> 27 + #include <asm/mach-pnx8550/pci.h> 28 + 29 + #ifndef CONFIG_PNX8550 30 + #error "This file is PNX8550 bus glue. CONFIG_PNX8550 must be defined." 31 + #endif 32 + 33 + extern int usb_disabled(void); 34 + 35 + /*-------------------------------------------------------------------------*/ 36 + 37 + static void pnx8550_start_hc(struct platform_device *dev) 38 + { 39 + /* 40 + * Set register CLK48CTL to enable and 48MHz 41 + */ 42 + outl(0x00000003, PCI_BASE | 0x0004770c); 43 + 44 + /* 45 + * Set register CLK12CTL to enable and 48MHz 46 + */ 47 + outl(0x00000003, PCI_BASE | 0x00047710); 48 + 49 + udelay(100); 50 + } 51 + 52 + static void pnx8550_stop_hc(struct platform_device *dev) 53 + { 54 + udelay(10); 55 + } 56 + 57 + 58 + /*-------------------------------------------------------------------------*/ 59 + 60 + /* configure so an HC device and id are always provided */ 61 + /* always called with process context; sleeping is OK */ 62 + 63 + 64 + /** 65 + * usb_hcd_pnx8550_probe - initialize pnx8550-based HCDs 66 + * Context: !in_interrupt() 67 + * 68 + * Allocates basic resources for this USB host controller, and 69 + * then invokes the start() method for the HCD associated with it 70 + * through the hotplug entry's driver_data. 71 + * 72 + */ 73 + int usb_hcd_pnx8550_probe (const struct hc_driver *driver, 74 + struct platform_device *dev) 75 + { 76 + int retval; 77 + struct usb_hcd *hcd; 78 + 79 + if (dev->resource[0].flags != IORESOURCE_MEM || 80 + dev->resource[1].flags != IORESOURCE_IRQ) { 81 + dev_err (&dev->dev,"invalid resource type\n"); 82 + return -ENOMEM; 83 + } 84 + 85 + hcd = usb_create_hcd (driver, &dev->dev, "pnx8550"); 86 + if (!hcd) 87 + return -ENOMEM; 88 + hcd->rsrc_start = dev->resource[0].start; 89 + hcd->rsrc_len = dev->resource[0].end - dev->resource[0].start + 1; 90 + 91 + if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) { 92 + dev_err(&dev->dev, "request_mem_region [0x%08llx, 0x%08llx] " 93 + "failed\n", hcd->rsrc_start, hcd->rsrc_len); 94 + retval = -EBUSY; 95 + goto err1; 96 + } 97 + 98 + hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len); 99 + if (!hcd->regs) { 100 + dev_err(&dev->dev, "ioremap [[0x%08llx, 0x%08llx] failed\n", 101 + hcd->rsrc_start, hcd->rsrc_len); 102 + retval = -ENOMEM; 103 + goto err2; 104 + } 105 + 106 + pnx8550_start_hc(dev); 107 + 108 + ohci_hcd_init(hcd_to_ohci(hcd)); 109 + 110 + retval = usb_add_hcd(hcd, dev->resource[1].start, SA_INTERRUPT); 111 + if (retval == 0) 112 + return retval; 113 + 114 + pnx8550_stop_hc(dev); 115 + iounmap(hcd->regs); 116 + err2: 117 + release_mem_region(hcd->rsrc_start, hcd->rsrc_len); 118 + err1: 119 + usb_put_hcd(hcd); 120 + return retval; 121 + } 122 + 123 + 124 + /* may be called without controller electrically present */ 125 + /* may be called with controller, bus, and devices active */ 126 + 127 + /** 128 + * usb_hcd_pnx8550_remove - shutdown processing for pnx8550-based HCDs 129 + * @dev: USB Host Controller being removed 130 + * Context: !in_interrupt() 131 + * 132 + * Reverses the effect of usb_hcd_pnx8550_probe(), first invoking 133 + * the HCD's stop() method. It is always called from a thread 134 + * context, normally "rmmod", "apmd", or something similar. 135 + * 136 + */ 137 + void usb_hcd_pnx8550_remove (struct usb_hcd *hcd, struct platform_device *dev) 138 + { 139 + usb_remove_hcd(hcd); 140 + pnx8550_stop_hc(dev); 141 + iounmap(hcd->regs); 142 + release_mem_region(hcd->rsrc_start, hcd->rsrc_len); 143 + usb_put_hcd(hcd); 144 + } 145 + 146 + /*-------------------------------------------------------------------------*/ 147 + 148 + static int __devinit 149 + ohci_pnx8550_start (struct usb_hcd *hcd) 150 + { 151 + struct ohci_hcd *ohci = hcd_to_ohci (hcd); 152 + int ret; 153 + 154 + ohci_dbg (ohci, "ohci_pnx8550_start, ohci:%p", ohci); 155 + 156 + if ((ret = ohci_init(ohci)) < 0) 157 + return ret; 158 + 159 + if ((ret = ohci_run (ohci)) < 0) { 160 + err ("can't start %s", hcd->self.bus_name); 161 + ohci_stop (hcd); 162 + return ret; 163 + } 164 + 165 + return 0; 166 + } 167 + 168 + /*-------------------------------------------------------------------------*/ 169 + 170 + static const struct hc_driver ohci_pnx8550_hc_driver = { 171 + .description = hcd_name, 172 + .product_desc = "PNX8550 OHCI", 173 + .hcd_priv_size = sizeof(struct ohci_hcd), 174 + 175 + /* 176 + * generic hardware linkage 177 + */ 178 + .irq = ohci_irq, 179 + .flags = HCD_USB11 | HCD_MEMORY, 180 + 181 + /* 182 + * basic lifecycle operations 183 + */ 184 + .start = ohci_pnx8550_start, 185 + .stop = ohci_stop, 186 + 187 + /* 188 + * managing i/o requests and associated device resources 189 + */ 190 + .urb_enqueue = ohci_urb_enqueue, 191 + .urb_dequeue = ohci_urb_dequeue, 192 + .endpoint_disable = ohci_endpoint_disable, 193 + 194 + /* 195 + * scheduling support 196 + */ 197 + .get_frame_number = ohci_get_frame, 198 + 199 + /* 200 + * root hub support 201 + */ 202 + .hub_status_data = ohci_hub_status_data, 203 + .hub_control = ohci_hub_control, 204 + .hub_irq_enable = ohci_rhsc_enable, 205 + #ifdef CONFIG_PM 206 + .bus_suspend = ohci_bus_suspend, 207 + .bus_resume = ohci_bus_resume, 208 + #endif 209 + .start_port_reset = ohci_start_port_reset, 210 + }; 211 + 212 + /*-------------------------------------------------------------------------*/ 213 + 214 + static int ohci_hcd_pnx8550_drv_probe(struct platform_device *pdev) 215 + { 216 + int ret; 217 + 218 + if (usb_disabled()) 219 + return -ENODEV; 220 + 221 + ret = usb_hcd_pnx8550_probe(&ohci_pnx8550_hc_driver, pdev); 222 + return ret; 223 + } 224 + 225 + static int ohci_hcd_pnx8550_drv_remove(struct platform_device *pdev) 226 + { 227 + struct usb_hcd *hcd = platform_get_drvdata(pdev); 228 + 229 + usb_hcd_pnx8550_remove(hcd, pdev); 230 + return 0; 231 + } 232 + 233 + MODULE_ALIAS("pnx8550-ohci"); 234 + 235 + static struct platform_driver ohci_hcd_pnx8550_driver = { 236 + .driver = { 237 + .name = "pnx8550-ohci", 238 + }, 239 + .probe = ohci_hcd_pnx8550_drv_probe, 240 + .remove = ohci_hcd_pnx8550_drv_remove, 241 + }; 242 + 243 + static int __init ohci_hcd_pnx8550_init (void) 244 + { 245 + pr_debug (DRIVER_INFO " (pnx8550)"); 246 + pr_debug ("block sizes: ed %d td %d\n", 247 + sizeof (struct ed), sizeof (struct td)); 248 + 249 + return platform_driver_register(&ohci_hcd_pnx8550_driver); 250 + } 251 + 252 + static void __exit ohci_hcd_pnx8550_cleanup (void) 253 + { 254 + platform_driver_unregister(&ohci_hcd_pnx8550_driver); 255 + } 256 + 257 + module_init (ohci_hcd_pnx8550_init); 258 + module_exit (ohci_hcd_pnx8550_cleanup);