Staging: bcm: Add two products and remove an existing product.

This patch adds two new products and modifies
the device id table to include them. In addition,
product of 0xbccd - BCM_USB_PRODUCT_ID_SM250 is
removed because Beceem, ZTE, Sprint use this id
for block devices.

Reported-by: Muhammad Minhazul Haque <[e-mail]>
Signed-off-by: Kevin McKinney <[e-mail]>
Cc: stable <[e-mail]>
Signed-off-by: Greg Kroah-Hartman <[e-mail]>

drivers/staging/bcm/InterfaceInit.c

···
 	{ USB_DEVICE(BCM_USB_VENDOR_ID_T3, BCM_USB_PRODUCT_ID_T3) },
 	{ USB_DEVICE(BCM_USB_VENDOR_ID_T3, BCM_USB_PRODUCT_ID_T3B) },
 	{ USB_DEVICE(BCM_USB_VENDOR_ID_T3, BCM_USB_PRODUCT_ID_T3L) },
-	{ USB_DEVICE(BCM_USB_VENDOR_ID_T3, BCM_USB_PRODUCT_ID_SM250) },
+	{ USB_DEVICE(BCM_USB_VENDOR_ID_T3, BCM_USB_PRODUCT_ID_SYM) },
 	{ USB_DEVICE(BCM_USB_VENDOR_ID_ZTE, BCM_USB_PRODUCT_ID_226) },
 	{ USB_DEVICE(BCM_USB_VENDOR_ID_FOXCONN, BCM_USB_PRODUCT_ID_1901) },
 	{ USB_DEVICE(BCM_USB_VENDOR_ID_ZTE, BCM_USB_PRODUCT_ID_ZTE_TU25) },
 	{ USB_DEVICE(BCM_USB_VENDOR_ID_ZTE, BCM_USB_PRODUCT_ID_ZTE_226) },
+	{ USB_DEVICE(BCM_USB_VENDOR_ID_ZTE, BCM_USB_PRODUCT_ID_ZTE_326) },
 	{ }
 };
 MODULE_DEVICE_TABLE(usb, InterfaceUsbtable);

drivers/staging/bcm/InterfaceInit.h

···
 #define BCM_USB_PRODUCT_ID_T3	0x0300
 #define BCM_USB_PRODUCT_ID_T3B	0x0210
 #define BCM_USB_PRODUCT_ID_T3L	0x0220
-#define BCM_USB_PRODUCT_ID_SM250	0xbccd
 #define BCM_USB_PRODUCT_ID_SYM	0x15E
 #define BCM_USB_PRODUCT_ID_1901	0xe017
 #define BCM_USB_PRODUCT_ID_226	0x0132 /* not sure if this is valid */
 #define BCM_USB_PRODUCT_ID_ZTE_226 0x172
+#define BCM_USB_PRODUCT_ID_ZTE_326 0x173 /* ZTE AX326 */
 #define BCM_USB_PRODUCT_ID_ZTE_TU25	0x0007
 
 #define BCM_USB_MINOR_BASE	192