EDAC, fsl_ddr: Add missing DDR DRAM types

The compatible DDR controllers may support DDR, DDR2, DDR3, DDR4 DRAM.
An individual controller doesn't support all of them. The EDAC driver
reads SDRAM_CFG to determine which mode is configured.

Add DDR4 and drop the defines used only in the mtype assignment.

Signed-off-by: York Sun <[e-mail]>
Cc: linux-edac <[e-mail]>
Cc: [e-mail]
Cc: [e-mail]
Cc: [e-mail]
Link: http://lkml.kernel.org/r/[e-mail]
Signed-off-by: Borislav Petkov <[e-mail]>

drivers/edac/fsl_ddr_edac.c

···
 	sdtype = sdram_ctl & DSC_SDTYPE_MASK;
 	if (sdram_ctl & DSC_RD_EN) {
 		switch (sdtype) {
-		case DSC_SDTYPE_DDR:
+		case 0x02000000:
 			mtype = MEM_RDDR;
 			break;
-		case DSC_SDTYPE_DDR2:
+		case 0x03000000:
 			mtype = MEM_RDDR2;
 			break;
-		case DSC_SDTYPE_DDR3:
+		case 0x07000000:
 			mtype = MEM_RDDR3;
+			break;
+		case 0x05000000:
+			mtype = MEM_RDDR4;
 			break;
 		default:
 			mtype = MEM_UNKNOWN;
···
 		}
 	} else {
 		switch (sdtype) {
-		case DSC_SDTYPE_DDR:
+		case 0x02000000:
 			mtype = MEM_DDR;
 			break;
-		case DSC_SDTYPE_DDR2:
+		case 0x03000000:
 			mtype = MEM_DDR2;
 			break;
-		case DSC_SDTYPE_DDR3:
+		case 0x07000000:
 			mtype = MEM_DDR3;
+			break;
+		case 0x05000000:
+			mtype = MEM_DDR4;
 			break;
 		default:
 			mtype = MEM_UNKNOWN;
···
 	}
 
 	edac_dbg(3, "init mci\n");
-	mci->mtype_cap = MEM_FLAG_RDDR | MEM_FLAG_RDDR2 |
-	    MEM_FLAG_DDR | MEM_FLAG_DDR2;
+	mci->mtype_cap = MEM_FLAG_DDR | MEM_FLAG_RDDR |
+			 MEM_FLAG_DDR2 | MEM_FLAG_RDDR2 |
+			 MEM_FLAG_DDR3 | MEM_FLAG_RDDR3 |
+			 MEM_FLAG_DDR4 | MEM_FLAG_RDDR4;
 	mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_SECDED;
 	mci->edac_cap = EDAC_FLAG_SECDED;
 	mci->mod_name = EDAC_MOD_STR;

drivers/edac/fsl_ddr_edac.h

···
 #define DSC_DBW_64	0x00000000
 
 #define DSC_SDTYPE_MASK		0x07000000
-
-#define DSC_SDTYPE_DDR		0x02000000
-#define DSC_SDTYPE_DDR2		0x03000000
-#define DSC_SDTYPE_DDR3		0x07000000
 #define DSC_X32_EN	0x00000020
 
 /* Err_Int_En */