ARM: dts: suniv: add initial DTSI file for F1C100s

F1C100s is one product with the suniv die, which has a 32MiB co-packaged
DDR1 DRAM chip. As we have the support for suniv pin controller and CCU now, add a
initial DTSI for it.

Signed-off-by: Mesih Kilinc <[e-mail]>
Signed-off-by: Maxime Ripard <[e-mail]>

arch/arm/boot/dts/suniv-f1c100s.dtsi

···
+// SPDX-License-Identifier: (GPL-2.0+ OR X11)
+/*
+ * Copyright 2018 Icenowy Zheng <[e-mail]>
+ * Copyright 2018 Mesih Kilinc <[e-mail]>
+ */
+
+#include <dt-bindings/clock/suniv-ccu-f1c100s.h>
+#include <dt-bindings/reset/suniv-ccu-f1c100s.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&intc>;
+
+	clocks {
+		osc24M: clk-24M {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+			clock-output-names = "osc24M";
+		};
+
+		osc32k: clk-32k {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+			clock-output-names = "osc32k";
+		};
+	};
+
+	cpus {
+		cpu {
+			compatible = "arm,arm926ej-s";
+			device_type = "cpu";
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		sram-controller@1c00000 {
+			compatible = "allwinner,suniv-f1c100s-system-control",
+				     "allwinner,sun4i-a10-system-control";
+			reg = <0x01c00000 0x30>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			sram_d: sram@10000 {
+				compatible = "mmio-sram";
+				reg = <0x00010000 0x1000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x00010000 0x1000>;
+
+				otg_sram: sram-section@0 {
+					compatible = "allwinner,suniv-f1c100s-sram-d",
+						     "allwinner,sun4i-a10-sram-d";
+					reg = <0x0000 0x1000>;
+					status = "disabled";
+				};
+			};
+		};
+
+		ccu: clock@1c20000 {
+			compatible = "allwinner,suniv-f1c100s-ccu";
+			reg = <0x01c20000 0x400>;
+			clocks = <&osc24M>, <&osc32k>;
+			clock-names = "hosc", "losc";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		intc: interrupt-controller@1c20400 {
+			compatible = "allwinner,suniv-f1c100s-ic";
+			reg = <0x01c20400 0x400>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		pio: pinctrl@1c20800 {
+			compatible = "allwinner,suniv-f1c100s-pinctrl";
+			reg = <0x01c20800 0x400>;
+			interrupts = <38>, <39>, <40>;
+			clocks = <&ccu 37>, <&osc24M>, <&osc32k>;
+			clock-names = "apb", "hosc", "losc";
+			gpio-controller;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			#gpio-cells = <3>;
+
+			uart0_pe_pins: uart0-pe-pins {
+				pins = "PE0", "PE1";
+				function = "uart0";
+			};
+		};
+
+		timer@1c20c00 {
+			compatible = "allwinner,suniv-f1c100s-timer";
+			reg = <0x01c20c00 0x90>;
+			interrupts = <13>;
+			clocks = <&osc24M>;
+		};
+
+		wdt: watchdog@1c20ca0 {
+			compatible = "allwinner,suniv-f1c100s-wdt",
+				     "allwinner,sun4i-a10-wdt";
+			reg = <0x01c20ca0 0x20>;
+		};
+
+		uart0: serial@1c25000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c25000 0x400>;
+			interrupts = <1>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu 38>;
+			resets = <&ccu 24>;
+			status = "disabled";
+		};
+
+		uart1: serial@1c25400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c25400 0x400>;
+			interrupts = <2>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu 39>;
+			resets = <&ccu 25>;
+			status = "disabled";
+		};
+
+		uart2: serial@1c25800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c25800 0x400>;
+			interrupts = <3>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu 40>;
+			resets = <&ccu 26>;
+			status = "disabled";
+		};
+	};
+};