riscv: dts: Re-organize the DT nodes

As per the convention for any SOC device with external connection,
define only device DT node in SOC DTSi file with status = "disabled"
and enable device in Board DTS file with status = "okay"

Reported-by: Anup Patel <[e-mail]>
Signed-off-by: Yash Shah <[e-mail]>
Signed-off-by: Paul Walmsley <[e-mail]>

arch/riscv/boot/dts/sifive/fu540-c000.dtsi

···
 			interrupt-parent = <&plic0>;
 			interrupts = <4>;
 			clocks = <&prci PRCI_CLK_TLCLK>;
+			status = "disabled";
 		};
 		uart1: serial@10011000 {
 			compatible = "sifive,fu540-c000-uart", "sifive,uart0";
···
 			interrupt-parent = <&plic0>;
 			interrupts = <5>;
 			clocks = <&prci PRCI_CLK_TLCLK>;
+			status = "disabled";
 		};
 		i2c0: i2c@10030000 {
 			compatible = "sifive,fu540-c000-i2c", "sifive,i2c0";
···
 			reg-io-width = <1>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			status = "disabled";
 		};
 		qspi0: spi@10040000 {
 			compatible = "sifive,fu540-c000-spi", "sifive,spi0";
···
 			clocks = <&prci PRCI_CLK_TLCLK>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			status = "disabled";
 		};
 		qspi1: spi@10041000 {
 			compatible = "sifive,fu540-c000-spi", "sifive,spi0";
···
 			clocks = <&prci PRCI_CLK_TLCLK>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			status = "disabled";
 		};
 		qspi2: spi@10050000 {
 			compatible = "sifive,fu540-c000-spi", "sifive,spi0";
···
 			clocks = <&prci PRCI_CLK_TLCLK>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			status = "disabled";
 		};
 	};
 };

arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts

···
 	};
 };
 
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
 &qspi0 {
+	status = "okay";
 	flash@0 {
 		compatible = "issi,is25wp256", "jedec,spi-nor";
 		reg = <0>;